[Q] "Unreliable Mode" after Unrevoked - Wildfire Q&A, Help & Troubleshooting

Hi there,
I searched for quite some time, but couldn't really find something which would help...
I used an XTC Clip to S-Off my Wildfire. After that I flashed from shipped roms a pre-2.2 rom (the first I tried didn't recognize the touch screen??). After successful RUUing and available touch screen I went on with unrevoked (latest version). The phone rebooted and unrevoked (on OS X) waits for the bootloader. The phone goes into hboot, but I can't use power or volume keys to select "recovery", so the phone comes up with 2 menu items "Action for Diag Mode" and "Press Power to Flash". I tried now a few roms (all 2.1) from shipped roms, but all with the same result. If I unplug USB, pull out battery, bring it back in and power on the phone it boots normally. I just can't do anything in hboot...
Does this rings a bell for somebody?
Many thanks in advance
best regards
meikelrix

I did the same with my wildfire and found you have to use unrevoked 3.2 to root it. You may have to go through the downgrade procedure again and then use unrevoked 3.2. It will hang after the rebooting into recovery step but by then the phone is rooted. Just close unrevoked and select reboot now on the phone
Sent from my Nexus S using XDA Premium App

Hi mvjh01,
tried that, but no luck. Still the prob of non reaction volume keys and power button. I noticed, that it "jumps to diag mode", which gives the the 2 choices...
meikelrix

meikelrix said:
Hi mvjh01,
tried that, but no luck. Still the prob of non reaction volume keys and power button. I noticed, that it "jumps to diag mode", which gives the the 2 choices...
meikelrix
Click to expand...
Click to collapse
I too noticed that problem once. Just press power off button it'll flash the ROM the that problem is solved. In your case it may have caused this problem because u might have interpertted the xtc clip in between while the it was updating ur phone.

Hi Lucky,
you mean by "press power off button" once you're in Diag, right? This just reflashes the ROM, but didn't solve the problem with the non reacting power / volume keys in hboot menu itself. Strangely enough: the power and volume keys are working in "Diag Mode"?

Its really strange.. Try to install Official RUU ROM by connecting to pc. It'll detect automatically. Try to install latest one. After that use xtc clip again to unlock it. If possible try to use xtc clip in that mode. If xtc clip doesn't work put pc49img.zip file to memory card (Gold Card) then boot it'll detect that file and it'll give instruction to install it. If that too wont work goto abd but make sure your cell is connected. Try installing update.zip using fastboot. If this too wont work then install official ROM.
For for jumbling the statement, i'm using mobile so can't explain properly.

Or flash offical 2.2 and wait for AlphaRevX which should be comming soon

After S-OFF by xtc clip, u wont get back to S-ON even on flashing froyo RUU. I didn't get u clearly what the problem is. Are u able to access hboot menu...? If yes, then it is OK.
If u can flash a froyo RUU, then better do it. Once again u will be on stock froyo with S-OFF. Now just install custom recovery through PC49IMG process. Then u can install any custom rom from the custom recovery. If u still want to use that stock rom , then u can use psneuter/gingerbreak to root it.
Get the file and process from here: http://forum.xda-developers.com/showpost.php?p=12188132&postcount=15
In case if u r unable to flash froyo RUU, and can access hboot menu, then u can update the things from hboot menu. Flash all the official contents with same PC49IMG method. That should solve any of ur problems. Then flash custom recovery through same PC49IMG method.

Sounds like the Gold card is in and we are going to the wrong mode to reflash?
solution - remove gold card at boot , reinsert it before we go into recovery mode edit (or use a standard card)

[Solved] "Unreliable Mode" after Unrevoked
@bharatgaddameedi and @morbosity: many thanks for your hints! I'm now on CM7.0.3!
Short explanation: It turned out, that a combination of both tips and "SuperOneClickv1.7" did finally the trick.
Longer explanation: Once "Unrevoked" on OS X did it's first part and re-booted the phone, it stated, that it's waiting for the bootloader. My problem: I couldn't use Power and Volume keys, in order to select "recovery" from the boot menu. So the hint to remove SD before boot (thanks again morbosity) and put it back, once hboot is there, gave me finally the navigation keys back, which I could use later on. I noticed as well, that OS X console mentioned, that unrevoked couldn't do something with USB:
ERROR: usb_read failed with status e00002ed
ERROR: usb_write failed with status e00002ed
ERROR: usb_write failed with status e000404f
ERROR: usb_write failed with status e000404f
ERROR: usb_read failed with status e000404f
ERROR: Unable to create a plug-in (e00002be)
So I tried "SuperOneClickv1.9.5" (WinXP). In that console I got a message, that all went fine, but at the end it couldn't mount the root partition. So I went to "SuperOneClick1.7", and voila it rooted the pone.
I was still somehow stuck and even with the help of "ROM Manager" I didn't come to a result. So I followed the link from bharatgaddameedi's post (thank you again). I copied the in the thread mentioned "PC49IMG.zip" to SD's root and could finally install a working ClockModRecovery, from where I could then start the installation of CM7.
Many thanks again for your help and to the forum
Best regards
meikelrix

Related

[help] HTC Desire Can't Enter Recovery Mode and Clockworkmod

Hi guys, i am a newbie here.
Last night i was trying to root my desire using unrevoked. I followed the guide from XDA step by step and everything seemed fine until word "done" appear in unrevoked.
After that, desire supposed to enter recovery mode and clockworkdmod but there was nothing appear in the screen. My desire suddenly shut down.
Can you tell me what am i suppose to do then because i want to put custom rom in my desire and now there's nothing i can do because it can't enter recovery mode (it only able to enter bootloader or Android OS itself).
Thanks
kyosiro said:
Hi guys, i am a newbie here.
Last night i was trying to root my desire using unrevoked. I followed the guide from XDA step by step and everything seemed fine until word "done" appear in unrevoked.
After that, desire supposed to enter recovery mode and clockworkdmod but there was nothing appear in the screen. My desire suddenly shut down.
Can you tell me what am i suppose to do then because i want to put custom rom in my desire and now there's nothing i can do because it can't enter recovery mode (it only able to enter bootloader or Android OS itself).
Thanks
Click to expand...
Click to collapse
when you are in boot loader, use the volume down key and goto recovery and git power button. you should then be taken to clockwork recovery. this is where you can select your rom from SD card and flash
I've tried to do that and now it stuck in HTC Logo. Doest it mean i've to try unrevoked again or simply unroot it?
try rebooting by taking battery off. i'm not an expert but you might have to do it manually using the guide http://forum.xda-developers.com/showthread.php?t=696189
did you install the unrevoked drivers?
Okay i will try. Btw, in case i want to unroot, can you tell me where i can get "RUU_Bravo_hTC_Asia_WWE_1.19.707.7_Radio_32.36.00.2 8U_4.06.00.02_2_release_126179" ? The link from XDA seems down and i can download any.
Me and another member have encountered the same issue, seems there's some bug in HBOOT or something.
Boot into Android, go to Settings > Privacy > Factory data reset. Once you confirm it, it will reboot your phone into Recovery.
BUT, unless you re-format (partition) your SD Card, you won't be able to get back in again (unless you do the Factory data reset again).
This seems to happen randomly. Right now I can get into Recovery just fine. But once the bug occurs, the only way to get it to stop is to format your SD card.
Now i am thinking to unroot it than trying to do the whole rooting step all over again. Can you tell me where i can get the RUU for HTC Desire Asia
kyosiro said:
Now i am thinking to unroot it than trying to do the whole rooting step all over again. Can you tell me where i can get the RUU for HTC Desire Asia
Click to expand...
Click to collapse
Here you go:
http://shipped-roms.com/shipped/Bra...00.28U_4.06.00.02_2_release_126179_signed.exe
Okay, i've done unrooting with HTC Desire RUU Asi and what happen now my SLCD is brick. I am really hopeless right now because guide for "SLCD Brick" doesn't even work in my phone because once again my htc can't enter recovery mode ><
"I am trying to use the guide from sprinker right now. Hopefully it will work"
when you are in hboot the volume down/up button work?
Hi all,
I also have the problem that I can no longer enter the recovery mode on my desire.
Basically, whenever I am in the bootloader menu (either by pressing vol-down+power, return+power, or via ROMManager) and then select "recovery" I get right back to the "fastboot" screen.
I tried uninstalling/installing/upgrading ROMManager and also tried flashing clockwork via the newest version of Unrevoked (downloaded yesterday).
Nothing helps :-(
What I didn't try, yet, is reformatting my SDCard or resetting my device via "Settings > Privacy > Factory data reset". (I don't want to install all my apps >again<; I'm also a bit afraid that I break something an then cannot even reflash using recovery).
Here is some more info about my device:
- Flashed rom: Leedroid 2.1a
- HBOOT 0.83.0001
- RADIO 5.10.05.23
I would be really greatful if anyone had a solution for this problem.
P.s.: in case I HAVE to reset/format: can I somehow make a backup of all my apps&settings?
Hi all, I have the same problem now.
Everything works, after s-off, except I can no longer enter Recovery - any solution?
I didn't find an easy solution. I had to do the following (some steps might be optional but I wanted to be sure):
- Formated SD card (ext3 and fat partition)
- Complete reset via RUU (RUU_Bravo_HTC_WWE_1.21.405.2_T2_Radio_32.41.00.32U_4.08.00.09_release_137222_signed.exe)
- Using unrevoked to reinstall recovery rom
- Reinstalled my custom rom (Leedroid)
Now everything works.
BTW: via TitaniumBackup I could backup all my apps and data quite easily. Didn't expect it to work that well
thanks- what about s-off - is it working now for you?
"s-off" = ?
I Have a similar problem... I can't enter recovery. When i press "recovery mode", I just get a black screen with a phone and a "!" in it.
Have to pull battery to reboot desire.
I have formatted sd.
Quite annoying, cause I need to wipe my battery stats, and I don't know any other way to do it, than going to recovery.
I tried to update ROM to Cyanogenrom which was unsuccessful - just get boot loop.
I also get the same 'red triangle with exclamation mark on phone' icon when trying to go to recovery mode.
So now I have a Desire which boot loops and cant enter recovery mode ...
anyone know how to get out of this one?
This might work for you
WAIT, BEFORE YOU START, CREATE A GOLDCARD. IT IS VERY NECESSARY. THINGS WILL GO WRONG IF YOU DONT.
YOU MUST BE ABLE TO BOOT GO TO THE BOOTLOADER MENU.
Firstly, download this file. http://dl.dropbox.com/u/13240777/Desire Downgrade.ZIP
Extract the files.
Run the win-down.bat file.
Follow on screen instructions.
After the process is completed, Head to the root of your SD card and check if there is a file named P99***IMG (FORGOT THE EXACT NAME BUT IT SHOULD BE SOMETHING LIKE THIS) there should be one.
Secondly, disconnect your phone and turn it off.
After that boot up your phone while pressing the volume down button and the power button.
The bootloader should be checking for files after awhile and once it found the file that is supposed to be in the root of your sd card, press the volume up button (NOT EXACTLY SURE, SHOULD BE THE ONE THAT SAYS YES AND CONTINUE)
It should be writing files to your phone. and replaces everything. E.G: HBOOT, RECOVERY,RADIO and such.
It should be writing files successfully and then it would ask you to reboot. Continue with the reboot and you should be having your Desire back to stock. Perfect.
PLEASE KEEP IN MIND THAT THERE ARE RISKS INVOLVED LIKE FAILURE OF WRITING TO THE HBOOT. PLEASE REMEMBER TO FOLLOW INSTRUCTIONS. MAINLY, DO NOT BLAME ME FOR ANYTHING THAT GOES WRONG.
FINALLY, YOU SHOULD BE READING EVERYTHING UP TO HERE AND THAT YOU MUST HAVE A GOLDCARD (A GOLD SD CARD)
Hope this helps you and please ask if you have further questions. PM me if the questions cannot be answered here. Good Luck
This should bring back your phone to stock. Root your phone again after it is done
i have the same issue. but i got stuck when trying to partition my sd card. Now i can't enter Android itself only the bootloader. But i also lost my clockwork recovery...
it keeps looping the HTC Quitly brilliant bootscreen... Forever!
i am now formatting my sd card with my pc. will i then be able to go into recovery again using a zip file from clockwork i found? using this:
fake-flash
Fake-flash is only possible with root access, you need to be rooted to use it. Basically, its a way to have recovery running on the phone without using a PC (making it safer as you are less likely to brick using no USB cable to push files, instead, you push directly from your phone). You can use "ROM Manager" from the marketplace to do this. Simply place the downloaded test recovery image on the phone and the downloaded rom zip (renamed to update.zip) and flash using ROM Manager.
Preperation
Download the fake-flash update zip from one of the links below
Copy the update.zip to the root of your SD card (the name MUST remain as update.zip)
When you want to launch the recovery image
Turn on your device with 'volume down' pressed and select 'Recovery'
When the exclamation mark appears, press and hold 'volume up' then press 'power'
Select the second option, 'Apply sdcard:update.zip
That's it, ClockworkMod recovery should launch!
Click to expand...
Click to collapse
and then installing a ROM with it?
(sry for bad english)
i'm having the exact same problem. i've tried fake flash and it does nothing for me, so does flashing the clockwork recovery image. the only one i haven't used yet is the downgrade...hope that will help

unbricking an Wildfire? AKA stuck at fastboot

Hi All
Sorry if this has been resolved before but I can't see the solution.
I have just got hold of an HTC Wildfire that's stuck on Fastboot:
BUZZ PVT SHIP S-ON
HBOOT-0.80.007
MICROP-0622
TOUCH PANEL-ATMELC03_16ac
RADIO-3.35.15.31
Aug 9 2010,22:37:43
Lets assume its never been rooted - what are my options
Currently none of the buttons work in Fastboot.
When I hold the power and volume down it enters HBOOT but as before non of the buttons or touch sensor works, tho if I plug in the usb cable it changes to HBOOT USB PLUG.
Any ideas on how I can bring it back to life?
TiA
I.
I am definitely lost here. I have no idea what you mean by "Stuck at Fastboot". Fastboot is a special mode enabled when you S-OFF the device using AlphaRev / Revolutionary, which allows special Fastboot commands, previously only allowed on engineering sample devices and developer devices. AFAIK, there is no such thing as "Fastboot" on a never rooted HTC Wildfire.
Anyway, it seems everything is in order (Because, I dont know what happens when you are trying to turn on the phone normally). But, note that when in HBOOT mode, you have to wait a while for the phone to scan through the sdcard for PC49IMG files. Once the scan is over, only then you can navigate through it. Also, navigation is achieved using the side volume buttons, and, to select an entity, use the power button. No other button, and the touch will not respond in the HBOOT Mode, and it is normal.
Now, assuming your device is not booting, try installing the Stock ROM over it again, but since installing an RUU will not be possible since the device is not booting, you will have to extract the ROM.zip from one.
- Download the Froyo WWE 2.22.405.1 RUU from here - (It is an EXE File) - http://shipped-roms.com/index.php?category=android&model=Buzz
- Extract the ROM.zip file from the RUU. Follow this method (Assuming you have a Windows PC) http://lukasz.szmit.eu/2010/04/extracting-rom-files-from-htc-android.html
- Once you have that file, rename it to PC49IMG.zip, place on your SDCard, then reboot in HBOOT mode. It will attempt to install the ROM itself. Remember again, only use the Power button to select stuff in HBOOT mode, and side volume keys to navigate.
Thanks for the reply: Sorry I failed to report that the device jumps straight to HBOOT from power on. Downloading the required files I'll do an update once the steps have been followed.
UPDATE:
Loading PC49IMG.zip
Checking PC49IMG.zip
CID incorrect!
Update FAIL!
Press <POWER> to reboot.
It's going to need a Goldcard in that case. Create one using this guide:
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
Alternately, use this GUI App to that:
http://android.modaco.com/topic/308798-pc-application-goldcardtool/
Thanks but correct me if I am wrong but don't you need to have a working Wildfire to generate a Gold card? (debug mode on)
Got an interesting update,
As I'm getting CID error's I'm guessing its down to the phone being a branded model.
Looking at the Phone, I ruled out Orange and Virgin as they usually plaster their logo all over the the phone.
Did I few keyword searches with keywords from the Part number and other digits on the box.
It started to look like a H3G (Three) Phone.
Using the link above I downloaded:
RUU_Buzz_H3G_UK_1.16.771.2_Radio_13.45.55.24_3.35.15.31_release_131501_signed.exe (Eclair version)
Followed the steps and above and it gave me the following error:
Main Version is older!
Update Fail!
So success! (well sort off). does anyone have a H3G (Three) UK signed Froyo image (exe) RUU?
Thanks
I.
There is an OTA update.zip available for H3G UK. Look for this file on Shipped ROMs:
OTA_Buzz_Froyo_H3G_UK_2.33.771.1-1.26.771.1_release_163490jq8do89dc3y83p6w.zip
Now, I am not 100% certain on how to install this, since I personally have never tried it, but, try this procedure nevertheless.
- Download that file
- Rename to update.zip
- Then, place it on your SDCard
- Reboot in HBOOT mode
- Navigate to RECOVERY in HBOOT Mode, Press Power button. This will show you a red triangle with an exclamation mark
- Now, Press VOL UP + POWER simultaneously, this should take you to the Stock Recovery
- Here, select apply SD:update.zip. It will again automatically attempt to update the ROM.
Again thanks for your help... I'm so close
Remember none of the keys are responsive even waiting for the timeout of the loading.
Also using a different method I've think I've created a goldcard. (If it works I'll post how I did it.)
What do I do once I have a goldcard?
What file should I be looking to install?
A generic WWE one in that case, (Froyo WWE 2.22.405.1 as I linked earlier, or, Eclair 1.37.405.1, both available as EXE's)
Remember though, Goldcards are device specific. But, the defective keys are indeed a problem. In such a case, I guess the only method that remains is the one I posted in post #2
Good Luck
FECK!
So if my goldcard was working, using the extraction rom.zip process in Step 2 it would override the CID incorrect issue, am I correct?
Currently I am still getting the same error message...
Back to the drawing board...
Yes, that is about correct. Also, some sdcards do not like being made into goldcards, so, if possible, try with another. (If even after retrying, it doesn't work)
Well I'm one step closer...
Created a Goldcard and I was able to install the ROM.zip it reported that it worked, however when I powered the unit back on it went straight back for fastboot....
:/
Are you sure it's an undamaged phone? Now it seems that it's sort of damaged. (Board / button damage). The RUU flash should have solved any software issues, because, as you verified, it did flash successfully.
BTW, can you tell me which RUU you flashed, and what do you get as the first few lines of HBoot? (Which initially was Buzz PVT SHIP S-ON, HBOOT 0.80.0007... etc)?
Checked all the buttons - seem to be ok, I can hear the micro switches clicking:
It has been updated:
HBOOT-1.01.0001
MICROP-0622
RADIO-3.35.20.10
Downloading SUnAaBh v1.1 will see if that will work.
You can't flash Sunaabh / Other ROM's using this method. Official one's only. The buttons may click, but, if they are not doing what they are intended to do, it's obviously damaged,
Hmm, ok can I force a clockworkmod flash?
It's going to need the S-OFF exploit by Revolutionary to push Clockworkmod Recovery, which I guess needs USB Debugging on.
http://revolutionary.io/
Well
Volume down and power button works - otherwise it would not have gone into HBOOT and Volume up button works otherwise I would not have been able to start the flash.
Def a strange one...
See if you can do a "Clear Storage" in HBoot, although it's not going to help, it's worth a shot IMO.
BTW, doesn't the phone automatically enter in HBoot when you turn on just using the Power key?

Stuck in WFS Recovery (White HTC Logo)

It all goes like this - I wanted to root my WPS to solve space problem, although, there was a solution for it without rooting, I figured I will be wanting to use some apps that need root access and some roms sooner or later.
So I did a search and found few ways to root my phone. Being a lazy ass I decided to use "the simple" one click solutions - gingerbreak (http://forum.xda-developers.com/showthread.php?t=1044765) or Root Unlocker (http://www.unlockroot.com/) This was no success. Gingerbreak kept rooting when I launched the app, but Root Unlocker displayed " FAIL TO GET SHELL ROOT". I figured that problem with Gingerbeak might be that I updated the software to the latest version -
Then I went on and tried another tutorial(http://forum.xda-developers.com/showthread.php?t=1195275). Everything was fine till I selected Recovery from bootloader. It got stuck with white HTC logo. Took out the battery tried to use newer version of ClockworkMod Recovery, but still was a no-go. I also can't do a factory restart. I can't do it from bootloader or settings > SD & phone storage > Factory data reset. (But could do it at first. Before trying to root my device I did a factory reset once.)
Is there a way to use another Recovery (not CMR) or force Recovery from fastboot? As I found there are some other people that got stuck with similar problem.
Other problems:
My phone doesn't show up in HTC Sync. Althought, when I tipe adb devices in cmd, it shows up. I did turn my AntiVirus off when I installed HTC Sync, but it still didn't display my phone.
I also found that I can't boot when I connect powered off phone to my pc. I have to take off my batery.
Here are my specs:
Model HTC Wildfire S A510e
It shows Marvel in bootloader.
Phone was S-OFF when I bought it.
Android 2.3.5
HTC Sence 2.1
Software number 2.26.401.3
I bought my phone without a contract from a local internet shop. I am from Baltics.
The phone might be somewhere from Europe.
My bet would be Poland. (guessing that manual language is Polish, but I might be wrong)
Thanks in advance.
UPDATE!
I took the original recovery img from http://forum.xda-developers.com/showthread.php?t=1426611 and flashed it. All went well. I did a restart (after doing this I was able to boot power my device while connected to pc) and had another try with CMR recovery, but it didn't work. I also I tried http://forum.xda-developers.com/showthread.php?t=1406321 recovery img, but it didn't help, I still can't get into.
How to root Wildfire S S-OFF the easy way
First download this
Put it in your memory card
then press and hold voldown+Power
It will load the bootloader follow the instructions on the screen and update accordingly
Then Turn off
Remove that PG76IMG from sdcard
After that download this and put in your memorycard and update same way, it will flash the CMR5.0.2.8 (after flashing dont forget to remove this PG76IMG from sdcard as well).
Now download this put it in your mmc and flash this from recovery.
Done.. U have successfully rooted Ur S-OFF device Now In CWM do factory reset install new custom rom according to the way devs say. I can assure U that this process will even remove Ur white screen
im stuck too on the recovery s-on btw and bootloader unlocked
ME TOO
but i m s-on
Same problem here, unlock by htc-dev worked. Recovery flashed but device stays stuck on the HTC logo. So my daughter's phone is unlocked but that's it.
Thanks, but now I am simply stuck with white htc logo on black background with purple line after entering recovery.
There might be another work around with fastboot, but also have a fastboot remote: not allowed.
Let me know
7axew3ku said:
Thanks, but now I am simply stuck with white htc logo on black background with purple line after entering recovery.
There might be another work around with fastboot, but also have a fastboot remote: not allowed.
Click to expand...
Click to collapse
I dont understand. If ur splash screen changed means u have installed cwm. Just select recovery and install a rom. Like this one
Download the rom. Put in ur sdcard.
remove battery
press vol down+power
press vol down
press power to select recovery
In recovery to move press vol up/down, to select press power
Wipe data/factory reset
Wipe cache partition
Advanced>> Wipe Dalvik cache then also wipe battery stats
Go back
Install zip from sdcard
Select the romname.zip put in sdcard
that should be it instructions are also found in that rom. thread so simple!!
7axew3ku said:
Thanks, but now I am simply stuck with white htc logo on black background with purple line after entering recovery.
There might be another work around with fastboot, but also have a fastboot remote: not allowed.
Click to expand...
Click to collapse
Here is a flash file you can try since you are S-Off. It should flash the default splash image, CWM 5.0.2.8, hboot 1.03 and re-calibrate the touch panel.
Hope it works for you.
Deleted
Problems persist
I have the same problem. My bootloader is unlocked via HTCDEV.com, though with S-ON. In any case...
My WFS is running 2.3.5, it's A510e.
installed recovery image 5.0.2.8 via console (had trouble installing it from the SD card).
each time I attempted to go HBOOT > RECOVERY, my phone would reboot, but would be stuck in black screen with the nav buttons at the bottom lit up (HOME, MENU, BACK, SEARCH).
installed recovery image 6.0.1.0 via SD card, going to HBOOT > RECOVERY will restart the phone, but it freezes on the white screen with the green HTC logo
downgraded to recovery image 6.0.0.3 via console, same problem - frozen on the white screen with the green HTC logo.
at this point, I'm out of ideas, but it seems that recovery image is at fault here?
*** UNLOCKED ***
MARVEL PVT SHIP S-ON RL
HBOOT-1.09.0099
MICROP-7.57.39.10M
Feb 8 2012,18:29:31
Is there a way to execute the ROOT.ZIP script on the phone but via the console on PC?
Return back to Normal after BOOT-LOOP !
muckz said:
I have the same problem. My bootloader is unlocked via HTCDEV.com, though with S-ON. In any case...
My WFS is running 2.3.5, it's A510e.
installed recovery image 5.0.2.8 via console (had trouble installing it from the SD card).
each time I attempted to go HBOOT > RECOVERY, my phone would reboot, but would be stuck in black screen with the nav buttons at the bottom lit up (HOME, MENU, BACK, SEARCH).
installed recovery image 6.0.1.0 via SD card, going to HBOOT > RECOVERY will restart the phone, but it freezes on the white screen with the green HTC logo
downgraded to recovery image 6.0.0.3 via console, same problem - frozen on the white screen with the green HTC logo.
at this point, I'm out of ideas, but it seems that recovery image is at fault here?
*** UNLOCKED ***
MARVEL PVT SHIP S-ON RL
HBOOT-1.09.0099
MICROP-7.57.39.10M
Feb 8 2012,18:29:31
Is there a way to execute the ROOT.ZIP script on the phone but via the console on PC?
Click to expand...
Click to collapse
Hi,
I read boot-looped for many in this thread...
I Hope this method would solve all your problems....
Follow and flash these system.img, boot.img and recovery.img file as in the link. (You must have installed .net framework on your PC).
http://forum.xda-developers.com/showpost.php?p=21891784&postcount=1
Hope this may useful!! (If really just press 'Thanks")......
Senthamil said:
Hi,
I read boot-looped for many in this thread...
I Hope this method would solve all your problems....
Follow and flash these system.img, boot.img and recovery.img file as in the link. (You must have installed .net framework on your PC).
http://forum.xda-developers.com/showpost.php?p=21891784&postcount=1
Hope this may useful!! (If really just press 'Thanks")......
Click to expand...
Click to collapse
Nope didn't work. I reflashed each of the boot.img, system.img, and recovery.img, manually though, since the utility didn't work for me. To do this, I booted into HBOOT, then FASTBOOT, and ran commands from my machine "fastboot flash <image type> <image.img>", where <image type> is either boot, recovery, or system, and <image.img> is the corresponding image (boot.img, recovery.img, system.img).
It seems my recovery cannot boot from HBOOT. It simply gets stuck.
With clockwork recovery 5.0.2.6, the phone appears to shut off completely.
With clockwork recovery 5.0.2.8, the phone will shut off except the Android buttons at the bottom are lit up.
I don't know if I can use later CW recovery images, but I tried 6.0.0.3 and I get stuck at the white background with green HTC logo when attempting to go into RECOVERY. Downgraded back to 5.0.2.8.
However, I gave the HTC SuperTool v3 another try, and this time it worked. Previously was giving me errors.
So... to those that are stuck, boot your phone normally. Make sure to go into Settings > Applications > Development and enable USB debugging. Also enable 3rd party installs, just in case.
Then proceed to STEP 3 on this page http://www.htcwildfiresblog.com/2012/03/guide-to-rooting-htc-wildfire-s-235-s.html
For those who want more info, here's another thread:
http://forum.xda-developers.com/showthread.php?t=1725398
It appears that the latest Wildfire S has a slightly different firmware, possibly for the video chip, which causes the CWM Recovery not to work. Perhaps there'll be a fix released eventually, but for now you can follow the thread above for some possible workarounds and more info.
Try mg all in one tool. Here: http://forum.xda-developers.com/showthread.php?t=1697985
It should sort out you guys problems.
muckz said:
Nope didn't work. I reflashed each of the boot.img, system.img, and recovery.img, manually though, since the utility didn't work for me. To do this, I booted into HBOOT, then FASTBOOT, and ran commands from my machine "fastboot flash <image type> <image.img>", where <image type> is either boot, recovery, or system, and <image.img> is the corresponding image (boot.img, recovery.img, system.img).
It seems my recovery cannot boot from HBOOT. It simply gets stuck.
With clockwork recovery 5.0.2.6, the phone appears to shut off completely.
With clockwork recovery 5.0.2.8, the phone will shut off except the Android buttons at the bottom are lit up.
I don't know if I can use later CW recovery images, but I tried 6.0.0.3 and I get stuck at the white background with green HTC logo when attempting to go into RECOVERY. Downgraded back to 5.0.2.8.
However, I gave the HTC SuperTool v3 another try, and this time it worked. Previously was giving me errors.
So... to those that are stuck, boot your phone normally. Make sure to go into Settings > Applications > Development and enable USB debugging. Also enable 3rd party installs, just in case.
Then proceed to STEP 3 on this page http://www.htcwildfiresblog.com/2012/03/guide-to-rooting-htc-wildfire-s-235-s.html
Click to expand...
Click to collapse
It finally worked. I am rooted. Thanks mate and everybody (who hasn't already received a thanks) that joined this posts receives virtual cookie from me and thanks.
I flashed stock http://forum.xda-developers.com/showpost.php?p=21891784&postcount=1 and run SuperTool and it worked.
It took me a week, but it is finally done. Let the good times roll.:laugh:
7axew3ku said:
It finally worked. I am rooted. Thanks mate and everybody (who hasn't already received a thanks) that joined this posts receives virtual cookie from me and thanks.
I flashed stock http://forum.xda-developers.com/showpost.php?p=21891784&postcount=1 and run SuperTool and it worked.
It took me a week, but it is finally done. Let the good times roll.:laugh:
Click to expand...
Click to collapse
It appears that CWM 5.0.2.8 actually works, but it doesn't provide any output to the screen. With ROM Manager, you can automate starting into CWM Recovery and installing a custom ROM, so it doesn't matter if the screen is blank.

BOOTLoader Stuck HTC Wildfire

Hi guys. Sorry if this is a repost but... i cant find anything useful..to help with my problem...
So i have this HTC Wildfire Buzz... The first wildfire ever made, and it gets stuck in bootloader, I cant change options with volume keys, i cant do nothing. It freezes up in bootloader, i cant even turn it off. i need to take out the battery to turn off the phone..
What to do? I dont know how to install a RUU and which one. Please help?
BUZZ PVT SHIP S-OFF
HBOOT--1.01.0001
MICROP-0622
TOUCH PANEL-ATMELC03_16AC
RADIO-3.35.20.10
Nov 17 2010
Try update with PD98IMG ZIP find something like that, put it on sdcard and boot to HBOOT it should start updating ROM.
throw183 said:
Hi guys. Sorry if this is a repost but... i cant find anything useful..to help with my problem...
So i have this HTC Wildfire Buzz... The first wildfire ever made, and it gets stuck in bootloader, I cant change options with volume keys, i cant do nothing. It freezes up in bootloader, i cant even turn it off. i need to take out the battery to turn off the phone..
What to do? I dont know how to install a RUU and which one. Please help?
BUZZ PVT SHIP S-OFF
HBOOT--1.01.0001
MICROP-0622
TOUCH PANEL-ATMELC03_16AC
RADIO-3.35.20.10
Nov 17 2010
Click to expand...
Click to collapse
you need to take out the sdcard. the bootloader is failing because the stuff on it is too large or its a dud card.
using a different sdcard go to the "how to downgrade from hboot 1.02.0000 to hboot 1.01.0001" thread in the general section and download the package. open it and rename the 1.01.zip to pc49img.zip (making sure its not.zip.zip) and then put it onto the sdcard. put that into the phone and reboot to bootloader. assuming all is well it will find the "update" and ask you to flash it. select volume up to flash. wait for complete install and full reboot into stock rom. job done
nop didnt work, any other idea??????
i rename the 1.01.zip to pc49img.zip and then i put it into the sdcard
i start the phone holding the "down volume" boot into bootloader mode after 3 sec started
searching image.. image not found..image not found..image not found..
and back to bootloader without can move any button.
i'm 6 hours trying to find a solution even adb i tried but this not founding device cause i cannot debug usb.
plz HHhhheeeeelp
angelos83gr said:
i rename the 1.01.zip to pc49img.zip and then i put it into the sdcard
i start the phone holding the "down volume" boot into bootloader mode after 3 sec started
searching image.. image not found..image not found..image not found..
and back to bootloader without can move any button.
i'm 6 hours trying to find a solution even adb i tried but this not founding device cause i cannot debug usb.
plz HHhhheeeeelp
Click to expand...
Click to collapse
Your sdcard is incompatible (make sure its a genuine card, like sandisk ect and is preferably under 4gb) or you have renamed it to pc49img.zip.zip, if you are using windows search on Google for how to enable file extensions and see if its named zip.zip
Sent from my HTC Sensation using Tapatalk
im not that rookie
the file extension is correct.
and the sd card is 2gb from my other mobile(st15i)
Also, just because your card came from another phone and is 2gb does not mean a htc bootloader will like it. Sometimes they just reject reading from some cards. Nothing wrong with them other than the hboot simply not liking them. Try a different card if possible.
Please do not post private correspondence in public. Especially in the manner that it did. Please be patient when asking quesitons, as others do have personal lives and cannot respond instantaneously.
Hi,
I just have the exact same pb (except my HBOOT is 1.01.0002 and it is branded Bouygues). I had no SD card in my phone. At first I thought it was hardware because I found some other thread saying that this could be a short circuit resulting in power + vol down behing hold at all time, hence the bootloader and kesy not responding but it turns ou it was not it... So hope for you I guess.
* I download a RUU : RUU_Buzz_Froyo_HTC_WWE_2.22.405.1_Radio_13.55.55.24H_3.35.20.10_release_160191_signed.exe
* plugged the phone without battery
* put battery in (which resulted once again in bootloader screen)
* waited for the device to be installed on my computer
* after that I run the RUU.exe which wipped user data, did some other stuff... (meanwhile the screen went from bootloader to HTC) and at some point the instalation failed with a error 131 id client (because the version was older than the one installed on the phone)
* after that the phone restarted normally and everything is fine now
well, nevermind..
It works as long as I don't turn off the phone.... This is driving me nuts. I managed to downgrade the HBOOT to 1.01.1001, gained S-OFF with revolutionnary (couldn't install clockwork recovery though). I even run the RUU successfully but if I turn off the phone, next time I power it on, I end up on the bootloader screen and power and volume buttons are not working.
[Edit] I found more info in this thread http://forum.xda-developers.com/showthread.php?t=2354199#post58713960.
Instead of running the RUU, I can skip the bootloader by simply running the command :
fastboot reboot
I don't want have to do this every time I turn off my phone to make it work again. So, I'm still looking for a more definitive fix.
heavy_metal_man said:
Hmm. When your in your stock rom does the volume buttons work?
Click to expand...
Click to collapse
Actually I managed to solve this 2 days ago (I am pretty sure I already posted to say that, can't find the reply though) by copying a CMW 5.0.2.8 PC49IMG.zip (http://www25.zippyshare.com/v/70647552/file.html) file in my sdcard and inserting it in the phone.
I could boot the phone in normal mode without going through bootloader screen (even without flashing anything...).
After I restarted to bootloader (willingly this time) keys were working, it prompted for the update, so I could install CMW and after CM 7.
So everything is fine now thank you.
Fatsebz said:
well, nevermind..
It works as long as I don't turn off the phone.... This is driving me nuts. I managed to downgrade the HBOOT to 1.01.1001, gained S-OFF with revolutionnary (couldn't install clockwork recovery though). I even run the RUU successfully but if I turn off the phone, next time I power it on, I end up on the bootloader screen and power and volume buttons are not working.
[Edit] I found more info in this thread http://forum.xda-developers.com/showthread.php?t=2354199#post58713960.
Instead of running the RUU, I can skip the bootloader by simply running the command :
fastboot reboot
I don't want have to do this every time I turn off my phone to make it work again. So, I'm still looking for a more definitive fix.
Click to expand...
Click to collapse
Hmm. When your in your stock rom does the volume buttons work?
You can install clockworkmod recovery by using fastboot commands pal. If your on your stock rom and dont have advanced reboot you can download an app called quick reboot and use that to reboot. We need to work out if its your volune buttons that are broken or not. If they are we may be able to replace them, or worst case senario we can disable them.
Sent from my LG-D802 using Tapatalk

boot loop for no reason, unmodified phone

Hello,
I am no expert but i usually fix problems, however this one keeps puzzling me for a long time now.
I own a wildfire, not modded, not modified in any way. One day I open a qr code app, it decides to freeze, so i reboot. (i think i had to remove the battery) It takes about 15min to boot, doesn't respond to any input and then reboots and the cycle continues.
I have looked into several solutions for the problem, but all require me to turn S-off. But to do that I need to turn on usb-debug, but to do that I need a bootable image!!!!
At first i wanted to mod, tried revolutionary to turn off S, but doesn't work because i can't turn on usb-debug.
Then i wanted to turn off S the HTC way, where they send me the code needed to unlock it, but it said i had to first update the RUU and guess what:
"To install the RUU, simply follow these instructions: On your phone, enable USB debugging. (..)"
I do not understand what i should choose from the RUU download page, but if it helps i am from Italy. I tried the program and this is the output:
C:\Users\*user*>fastboot oem get_identifier_token
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.007s]
finished. total time: 0.007s
I did all possible options the bootloader gives me: deleted all user data (losing most of my stuff i guess), I tried recovery too but it doesn't like the image. (which i have not touched or modified in any way)
specs:
BUZZ PVT SHIP S-ON
HBOOT - 1 . 01 . 0001
MICROP - 0622
TOUCH PANEL - ATMELC03_16ac
RADIO - 3 . 35 . 20 . 10
Nov 17 2010 , 12:08:53
stormsight said:
Hello,
I am no expert but i usually fix problems, however this one keeps puzzling me for a long time now.
I own a wildfire, not modded, not modified in any way. One day I open a qr code app, it decides to freeze, so i reboot. (i think i had to remove the battery) It takes about 15min to boot, doesn't respond to any input and then reboots and the cycle continues.
I have looked into several solutions for the problem, but all require me to turn S-off. But to do that I need to turn on usb-debug, but to do that I need a bootable image!!!!
At first i wanted to mod, tried revolutionary to turn off S, but doesn't work because i can't turn on usb-debug.
Then i wanted to turn off S the HTC way, where they send me the code needed to unlock it, but it said i had to first update the RUU and guess what:
"To install the RUU, simply follow these instructions: On your phone, enable USB debugging. (..)"
I do not understand what i should choose from the RUU download page, but if it helps i am from Italy. I tried the program and this is the output:
C:\Users\*user*>fastboot oem get_identifier_token
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.007s]
finished. total time: 0.007s
I did all possible options the bootloader gives me: deleted all user data (losing most of my stuff i guess), I tried recovery too but it doesn't like the image. (which i have not touched or modified in any way)
specs:
BUZZ PVT SHIP S-ON
HBOOT - 1 . 01 . 0001
MICROP - 0622
TOUCH PANEL - ATMELC03_16ac
RADIO - 3 . 35 . 20 . 10
Nov 17 2010 , 12:08:53
Click to expand...
Click to collapse
Hmmm. First off, have you tried to factory reset from recovery? If you boot into the recovery and then hold both volume buttons and power a usable menu should appear. Factory reset from there and reboot. See if that helps.
If not we turn our attention to your hboot. The error is because it is not updated enough to have that command. So we have two choices here. You can either upgrade the hboot, unlock your bootloader via htcdev and flash a custom rom. Or you could create a Goldcard, flash a ruu that has the same hboot as the one you have. This should fix your rom and enable the phone to boot again.
In any event you will need to extract the rom.zip from whichever ruu you choose. To do that have a quick google search for a guide but its easy enough. After that rename the rom.zip to PC49img.zip and place it onto your sdcard, boot into hboot and allow it to flash it. The golcard process should be covered in one of my downgrade threads or one of the others from this forum.
Post back here if your having and trouble or need a hand
heavy_metal_man said:
Hmmm. First off, have you tried to factory reset from recovery? If you boot into the recovery and then hold both volume buttons and power a usable menu should appear. Factory reset from there and reboot. See if that helps.
Click to expand...
Click to collapse
Yes, i forgot to mention: i have tried all options in the recovery (red triangle thing) too (clear cache, factory reset) nothing worked, it says: E:Can't open /cache/recovery/command
heavy_metal_man said:
You can upgrade the hboot, unlock your bootloader via htcdev and flash a custom rom.
Click to expand...
Click to collapse
To do this, i would need usb-debug enabled, so I think i cannot, but if there is a way please tell me!
heavy_metal_man said:
Or you could create a Goldcard
Click to expand...
Click to collapse
To do this i will need a micro-sd adapter to put my card into my computer, i will find one and try it out.
I also read that i need the correct RUU for my carrier. I am not understanding very well what i'm doing, also no idea what a RUU is or where to get the appropriate one for my Hboot and carrier, any advice ?
stormsight said:
Yes, i forgot to mention: i have tried all options in the recovery (red triangle thing) too (clear cache, factory reset) nothing worked, it says: E:Can't open /cache/recovery/command
To do this, i would need usb-debug enabled, so I think i cannot, but if there is a way please tell me!
To do this i will need a micro-sd adapter to put my card into my computer, i will find one and try it out.
I also read that i need the correct RUU for my carrier. I am not understanding very well what i'm doing, also no idea what a RUU is or where to get the appropriate one for my Hboot and carrier, any advice ?
Click to expand...
Click to collapse
All usb debugging is for is so that adb can reboot the device to hboot. If you google for how to extract the rom.zip from the ruu and then put it on the sdcard (after renaming it to PC49IMG.zip) and boot to hboot it is the same thing. Just without usb debugging needed.
You will need a micro sdcard adapter pal.
alright, after using the HTC dev method, i unlocked the phone, it still says S-ON but *** UNLOCKED *** on top, the HBOOT is now 1.02.000
after that i obtained the ClockWorkMod recovery img (i used version 5.0.2.0) and did in the terminal:
fastboot flash recovery recovery-clockwork-5.0.2.0-buzz.img
stormsight said:
alright, after using the HTC dev method, i unlocked the phone, it still says S-ON but *** UNLOCKED *** on top, the HBOOT is now 1.02.000
after that i obtained the ClockWorkMod recovery img (i used version 5.0.2.0) and did in the terminal:
fastboot flash recovery recovery-clockwork-5.0.2.0-buzz.img
Click to expand...
Click to collapse
good stuff pal.
when you are in clockworkmod recovery the controls are different. use the trackball to scroll and select. power button is now the back button.
I would recommend this custom rom as it is stable and has a stock vibe to it. just follow its install instructions and you should be good to go
Thanks, after many trial and error i ended up asking my hacker friend and managed to install cyanide mod.
However the same problem which i originally had persists ( it is very slow to boot (when it boots) and it doesn't react to any input, at this point it must be a hardware problem. This makes me very sad, i thought i saved it..
stormsight said:
Thanks, after many trial and error i ended up asking my hacker friend and managed to install cyanide mod.
However the same problem which i originally had persists ( it is very slow to boot (when it boots) and it doesn't react to any input, at this point it must be a hardware problem. This makes me very sad, i thought i saved it..
Click to expand...
Click to collapse
That suck man.
Hmmm. Slow boot times are normal on this phone to a certain degree. Usually 20secs to 3 minutes at first boot aftet rom flash.
Once the phone has booted up does the trackball still work? Could just be a damaged digitizer. They are fairly cheap these days. Look here http://m.ebay.co.uk/itm/281644653982 and here http://m.ebay.co.uk/itm/281644653982 fairly straight forward to install, but you could buy a used version of the phone for £30 minimum so its up to you
Edit: although, on reflection 15 boot time and constant reboots are not a good sign. I was hoping it was a software issue. If the trackball is functional you could go into settings, enable usb debugging and then get a logcat. That would at least give us somewhere to work from :-/
the trackball is functional because i can use it in clockwork recovery! but the phone doesn't react to it after boot, it's like it's stuck, i don't think the issue is the touchscreen, it used to work fine, it must be something else.
boot time is about 5-6minutes now, but after that it's like frozen, and after a couple more minutes it reboots. A big improvement, now the bootloop period is at least 70% shorter! xD
stormsight said:
the trackball is functional because i can use it in clockwork recovery! but the phone doesn't react to it after boot, it's like it's stuck, i don't think the issue is the touchscreen, it used to work fine, it must be something else.
boot time is about 5-6minutes now, but after that it's like frozen, and after a couple more minutes it reboots. A big improvement, now the bootloop period is at least 70% shorter! xD
Click to expand...
Click to collapse
Lol! Well at least thats a plus :-/ theres not much else we can do here. We could try to enable usb debugging fron within clockworkmod by editing the build.prop and see if we can get a logcat but if the phones just locking up we might not even get one :-/

Categories

Resources