Meritline NewEra "Hard" rubber case + screen protector- $9.99 - Atrix 4G Accessories

This looks like it might be a good deal and a little different than the other cases.
NewEra Atrix Case
I really kind of like the brown one, but since there aren't any reviews yet I'm kind-of scared of lousy quality.
Has anyone seen or tried these?

Needa know if these cases are nice! Anyone know the deal with quality of these things?
Sent from my MB860 using XDA App

The hard case looks a lot like the Incipio Feather. I would try one that covered the top and bottom, my 4 year old is always playing games on it and leaving those surfaces unprotected makes me nervous. My ringke case was awesome at first, but starting to stretch out and losing some of its polymer surface.

Related

Which hard case would you recommend?

I much prefer slim hard cases, typically seidio brand. I can't seem to find a good alternate. Quality is much more important to me than price. What do you guys suggest?
I'm on my fourth case and they all suck. One scratches the phone. One turns it off when I'm not looking. One fits too loosely, and one got all dirty the first day.
I'm going to buy this one next in silver. I like the fact that it looks like there's really no case and it got good reviews on the case mate site. I'll let you know how I like it if you want.
http://www.case-mate.com/Samsung-Ga...axy-S-T-Mobile-Vibrant-Barely-There-Cases.asp
I've been using my case-mate tough case ever since they came out with them, and I can't speak highly enough about the quality and fit.
mrsbelpit said:
I'm on my fourth case and they all suck. One scratches the phone. One turns it off when I'm not looking. One fits too loosely, and one got all dirty the first day.
I'm going to buy this one next in silver. I like the fact that it looks like there's really no case and it got good reviews on the case mate site. I'll let you know how I like it if you want.
http://www.case-mate.com/Samsung-Ga...axy-S-T-Mobile-Vibrant-Barely-There-Cases.asp
Click to expand...
Click to collapse
I tried this case in silver and sent it back. I found that it degraded my phone signal. Of course, AFTER I buy it I do some searching and find other complaints on the silver cases for various phones.
murse said:
I tried this case in silver and sent it back. I found that it degraded my phone signal. Of course, AFTER I buy it I do some searching and find other complaints on the silver cases for various phones.
Click to expand...
Click to collapse
I haven't noticed any issues with the silver barely there case that I just got. But as far as protection goes, probably not the best one for this thread's request.
I also have a tough case, which I highly recommend for anyone looking for a solid case for protection.
Case-mate tough case is great, as someone allready stated I cannot recommend it strongly enough. You won't find a better case for the money or more imo
Sent from my SGH-T959 using XDA App
What about the body glove case? I was looking at that one for a hard case. What do you guys think about it? Anyone use it?
I have a body glove case and frankly it leaves alot to be desired. The case easily doubles the thickness of the phone, and with out fail turns out my jean pockets every time I use it. I'm not sure if i got a bad case or what but the case does not seal properly all the way around the phone. I have had the misfortune of dropping my case from table height (appx 3ft high) and the body glove case did protect the phone wonderfully. I have the full black and chrome case, not the clear back shell. I am in the process of deciding on a different case and thus far I am heavily leaning towards the case-mate tough case.
Mesh case. Love it... every other case makes a thin phone too large.
Sent from my SGH-T959 using XDA App
shreddintyres said:
I have a body glove case and frankly it leaves alot to be desired. The case easily doubles the thickness of the phone, and with out fail turns out my jean pockets every time I use it. I'm not sure if i got a bad case or what but the case does not seal properly all the way around the phone. I have had the misfortune of dropping my case from table height (appx 3ft high) and the body glove case did protect the phone wonderfully. I have the full black and chrome case, not the clear back shell. I am in the process of deciding on a different case and thus far I am heavily leaning towards the case-mate tough case.
Click to expand...
Click to collapse
Hope that doesn't happen with the one I just ordered. But everything else you say about the case sounds great to me. I don't know how many times I have almost dropped the phone from it slipping out of my hands while pressing the volume or power buttons. Do the black Case-Mate cases have a rubberized feel to them?
My vote is for the bodyglove case. I have been through 4 cases and this far is my favorite. It protects gives the extra bulk and looks slick. It also has a kick stand which I use all the time.
Sent from my SGH-T959 using XDA App
Case Mate tough case for me. Silicone inside prevents scratches and tough plastic outside offers some protection from falls.
Sent from my SGH-T959 using XDA App
Here is a couple pics of the body glove in action. By the way it protects well I have dropped it a couple of times and the case comes apart instead of the phone breaking. I dont know how you wear your phone but I slide the phone in my pocket with the clip sticking out.
Trident Case for Samsung Vibrant
Got the TPU case, good fit, but feels cheap. Got the mesh case, looks decent but not much protection. Got tired of waiting for Otterbox. Almost got the CaseMate Toughcase but they only come in black or pink. Then I came across this last week. Check out the plugs and the buttons, even the back camera has clear cover over it. Liked the attention to details so pre-ordered it. According to the website, they're being shipped this Wednesday 11/17. Since I'm new, I can't post the link, here are some photos of the product. Just google Trident Cyclops Samsung Vibrant. Be sure to "Like" them on Facebook to save the $6.00 shipping. I wish ElementCase would make an ION3 or Liquid Carbon for Vibrant. I'm so sick of iphony and ipotty getting all the good cases.
Mokie8 said:
Got the TPU case, good fit, but feels cheap. Got the mesh case, looks decent but not much protection. Got tired of waiting for Otterbox. Almost got the CaseMate Toughcase but they only come in black or pink. Then I came across this last week. Check out the plugs and the buttons, even the back camera has clear cover over it. Liked the attention to details so pre-ordered it. According to the website, they're being shipped this Wednesday 11/17. Since I'm new, I can't post the link, here are some photos of the product. Just google Trident Cyclops Samsung Vibrant. Be sure to "Like" them on Facebook to save the $6.00 shipping. I wish ElementCase would make an ION3 or Liquid Carbon for Vibrant. I'm so sick of iphony and ipotty getting all the good cases.
Click to expand...
Click to collapse
Here is a link with a nice video to the case you mentioned:
http://www.youtube.com/watch?v=sJzBAR4P-R4
I have a case that I bought from daydeal.com, its a hybrid case made from hard plastic on the back and soft tpu on the sides, it pretty good.
Sent from my SGH-T959 using XDA App
I got my silver case mate barely there and it is awesome. I guess it is more of a looks than protection thing, but the front of the case is over the bezel so when the phone is face down there's still a gap. The silver is really good looking. Case mate also sent it the day I ordered, and I got it from GA to CA in 3 days.
murse said:
I tried this case in silver and sent it back. I found that it degraded my phone signal. Of course, AFTER I buy it I do some searching and find other complaints on the silver cases for various phones.
Click to expand...
Click to collapse
Are you sure it wasn't just a coincidence? The complaints were about the chrome, not the metallic silver. I haven't seen anything, and my phono widget says the signal is as strong as ever.
I really like this:
h tp://cgi. bay. om/ws/eBayISAPI.dll?ViewItem&item=370454207751&ssPageName=STRK:MEWNX:IT
- sorry - no outside links allowed on my xda account yet(?). You can figure out what shoud go in the spaces...
It's hard plastic with a rubbery feel. It's smooth enough to slide into my pocket and not pick up lint, but sticky enough that it can sit on my center armrest in the car without worrying about it sliding off.
There's also about a 1/16th inch high border around the screen that does a good job of keeping down any chance of a drop resulting in the screen touching anything the ground.
budney said:
Hope that doesn't happen with the one I just ordered. But everything else you say about the case sounds great to me. I don't know how many times I have almost dropped the phone from it slipping out of my hands while pressing the volume or power buttons. Do the black Case-Mate cases have a rubberized feel to them?
Click to expand...
Click to collapse
Figures!!! The upper left corner of the body glove case doesn't want to keep closed. I just sent an email to the seller for a refund. I'm thinking of just getting a extended battery with a rubberized back cover, and a new pouch to fit it.
Yea that's why I have the casemate now, hopefully you didn't order it on ebay there was this one seller that I bought it from and he would not repond to my messages about the case, also my bodyglove case won't stay closed at all anymore. I just think their quality control isn't all that great.
The tough case feels like abs plastic and is textured so it doesn't catch on pocket lining when you pull the phone out your pocket but it still feels good ib your hand and doesn't feel like its going to slout og your hands
Sent from my SGH-T959 using XDA App

S-Line case from eBay is awesome

I just got my S-line case (black) from eBay and I love it. It adds very little bulk, seems like it will do a good job protecting my phone, and looks very nice.
Definitely worth the $5!
Edit: Pics added
Jaxidian said:
I just got my S-line case (black) from eBay and I love it. It adds very little bulk, seems like it will do a good job protecting my phone, and looks very nice.
Definitely worth the $5!
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
I have one as well. Love it. Too bad the car dock doesn't work with the case on. I hate having to take it off, but at least it's pretty easy.
ttran97 said:
I have one as well. Love it. Too bad the car dock doesn't work with the case on. I hate having to take it off, but at least it's pretty easy.
Click to expand...
Click to collapse
Agree with you on all fronts, including car dock and easiness of taking the case off.
Sent from my ADR6400L using XDA App
Link?
10char
want a droid said:
Link?
10char
Click to expand...
Click to collapse
Was easy enough to find:
S-Line Ebay Case
For what it's worth, I got the black one, but I've heard better comments on the smoke one when I was doing my research.
Sent from my ADR6400L using XDA App
is the material that soft gel/rubber type? they look "sticky" lol how does it feel in the hand?
pretty cool looking, does it hold up?
is the inside rubber/silicon?
viceversa said:
is the material that soft gel/rubber type? they look "sticky" lol how does it feel in the hand?
Click to expand...
Click to collapse
There seems to be 2 types of materials, 3 finishes.
On mine, the clearish part is a slightly-bendable hard plastic with the texture of what all of my matte hard plastic. Think the type of plastic that is one most power adapters (that aren't shiny) but add a slightly bendable aspect to it.
The black part on the back is shiny, slick, smooth, and more flexible. It's similar to silicon cases (what I can assume you mean by soft gel/rubber) but I think it's still different. It seems to be less "floppy" even though it is very bendable. The shiny black part seems to "stick" to certain surfaces (such as my desk and other hard/flat surfaces) but not to some that you would expect (it doesn't stick to my pockets at all and glides just fine across my clothing, car seat, and non-leather furniture - it might stick to leather, I don't know). The black part on the front appears to be the same material as the black part on the back, but with a matte finish. The result of the different finish is that it doesn't have the "stickiness" on much of any surface, yet still gives your hand a slight bit of grip beyond what the stock TBolt gives you.
Overall, the "feel in hand" is comfortable and it gives you extra grip but doesn't feel sticky or anything like that. Imagine going from a slick, hard-plastic phone to a phone with a rubberized body (like our TBolt has). Going from a naked TBolt to this case is kinda like taking that one step further. But in no way could I ever describe it as "feeling sticky" in my hand or pocket.
jblist90 said:
pretty cool looking, does it hold up?
Click to expand...
Click to collapse
So it looks like/feels like it's not going to just fall apart or anything like that, if that's what you mean. I can't envision drops/dings or other daily use wearing it down.
The ONE concern that I have about it holding up is because it is made with two types of "plastic" (I don't know if it's plastic, silicon, rubber, or whatever, hence my quotes). I fear that if I take the case off and on a lot (for my car dock), that the joints of the two plastics might start to come apart. This is NOT based on any quality issues that I have seen so far, just a concern based on the fact that this wasn't produced in a single mold when it was melted down (this is coming from somebody with an engineering background).
I will be shocked, though, if I have a problem with this case in the next 6 months, and for $5, well, I'd say that's pretty damned good!
boristhebladexx said:
is the inside rubber/silicon?
Click to expand...
Click to collapse
Read my post a couple posts up about the 2 different types of materials with 3 finishes. As best as I can tell, the inside is the same material as the outside. What this means is that 60% of it is the very flexible plastic while the clear part does cover ~40% of the back. I would expect the black part to offer more protection to a fall/bump than the clear part, and fortunately the black part covers most of the corners and edges. Still, I expect the clear part to offer more protection than a hard plastic case would.
Updated the OP with some photos. Perhaps they will help.
thanks for the detailed feedback!
This case will also fit into the Verizon holster/shell combo holster. You just can't use the VZW shell, but it'll slide into the holster. The fit is a little snug, but it works. I like to swap out this case with the VZW shell. This one provies more protection, but the VZW one is pretty cool too.
In case anybody was wondering, I got mine from this seller from China: http://goo.gl/62Fhx
It took something like 10 days to get to me, but I didn't mind since it cost less than a good burger.
Jaxidian said:
I just got my S-line case (black) from eBay and I love it. It adds very little bulk, seems like it will do a good job protecting my phone, and looks very nice.
Definitely worth the $5!
Edit: Pics added
Click to expand...
Click to collapse
Hey, thanks for the write up. I'm in Arizona and ordered one for $5 from a California seller. I should have it early next week.
Thanks again
Sent from my BAMF ADR6400L using XDA Premium App
I ordered mine just before the thread was started and its my favorite case for my Thunderbolt. It looks so cool too!
sent from my BAMF Thunderbolt!
Well Done
$5 ARE YOU KIDDING ME? grrr I have the silicone case that I got from VZW for $15 and it's not even all that..
But I think all cases will add some bulk for for that price you cant go wrong. Great buy.
Might have to check this one out
Just a heads up, with this casr the phone fits like a champ in the holster of the shell/holster combo i got from VZW
sent from my BAMF Thunderbolt!

Seidio Active case or Incipio case?

I constantly am taking my phone outta my pocket, and it sometimes gets stuck when I wear jeans... Which case should I go with?
Sent from my ADR6350 using XDA App
If you are concerned with it getting stuck to your jeans, I recommend going with a case that doesn't have a soft rubber component to the case. Soft rubber in my experience will always stick more than just hard smooth case plastic. even the TPU cases seem to slide in and out of my pocket better than soft silicone (which is what I believe the seidio and incipio cases have exposed through the hard piece).
Other than that, I ordered the white and grey incipio and it should be here within the next couple days. I think it looks slick-as-snot (at least in the pics online). If you like, I'll let you know how much it sticks in my pocket when I get it.
the seidio surface that theatheistreverend referenced is a good one. so is the incipio feather. i have both but been using the incipio feather more just because it adds less bulk than the seidio. both are good and grippy without any issues of lint or getting stuck in pockets.
@theatheistreverend - look forward to hear what you think of the incipio white/grey. looks very nice but one of the reviewers did say the silicon seems to gather lint, which is why i went with the feather instead. at any rate, let us know what you think of it.
I failed to mention that I have the incipio case.. and that's what gets stuck. I'm thinking about trying out the Seidio though.
The Incipio is a great case for the Inc2, but it's a dust bunny, I had to get rid of it. TPU is great.
bik2101 said:
...been using the incipio feather...
@theatheistreverend - look forward to hear what you think of the incipio white/grey. looks very nice but one of the reviewers did say the silicon seems to gather lint, which is why i went with the feather instead. at any rate, let us know what you think of it.
Click to expand...
Click to collapse
How do you like that feather? I have thought about trying one but I worry about it protecting the top, bottom and corners. Does it seem like it would protect well against dropping regardless of how it lands? Mine always seems to land on its corner.
I will let you know when I get the incipio.
Sent from my ADR6350 using XDA Premium App
TheAtheistReverend said:
How do you like that feather? I have thought about trying one but I worry about it protecting the top, bottom and corners. Does it seem like it would protect well against dropping regardless of how it lands? Mine always seems to land on its corner.
I will let you know when I get the incipio.
Sent from my ADR6350 using XDA Premium App
Click to expand...
Click to collapse
Yeah I mean it probably wouldn't protect too well against drops especially to the top and bottom.
Sent from my Incredible 2 using Tapatalk
Well, I have had my incipio case on my phone most of the day and though I cannot attest to it gathering lint, I will say I am disappointed.
It is a lot of trouble getting the case on and off. The hard shell is so tight and the silicon is so soft, the hard case pulls at the silicon and a lot of adjusting needs to be done to get it right.
The softness of the silicon felt cool at first, but now I notice that it feels like a wrapper made of baby skin. The slightest push on an edge and it gives way and folds over backwards like a weak fingernail.
I'll get back to you if I notice any excess of lint. That is if I can stand to keep this on for much longer.
I still say it looks pretty sweet though.
Sent from my ADR6350 using XDA Premium App
Buy from Amazon to save some money guys. A lot cheaper than their website
Had my incipio on for a few days now. I have had to brush a hair or two from the silicon part of the case, but a lint magnet it is not. My house must just be a bigger lint magnet than my phone since everyone else seems to have lint issues with silicon.
I am beginning to really like my case, but I'll still try others as time goes on. I get bored.
Sent from my ADR6350 using XDA Premium App
I just ordered a Seidio Surface from Amazon. I got the case and a car charger for about $33 with shipping. I have an Innocase on my old Eris, and I liked it. They don't add too much size to the phone.

[CASE] X10 Best Case Poll!

I have been through many cases recently with my x10 including:
Alumor by Capdase
Edge by INCIPIO
Commuter by OtterBox
Silicone/Plastic Skin by (unkown)
Invisible Shield by ZAGG
I found that all of the cases were good in their own ways but had their downsides obviously.
a) Alumor, very snug design it has a great metal backing for excellent protection of the phone and really nice rubber/silicone inside for shock absorption. The rubber around the keys felt a little thick and I found myself often doubling click a button to get my desired keystroke. I found the case a tad bit bulky but obviously spared no cost in the protection department. I really liked the smooth feeling of the metallic backing against my hands. Overall a great case for in-and-out of pocket use. The rubber eventually peels but it does NOT discolour.
b) Edge, extremely tight fitting which leaves little room for screen protectors. But this tight fit ensures a small fitting case making it less cumbersome. Direct access to all of the keys and speakers was a big plus for me, it really made it feel like I didn't even have a case on my phone. A big downside, I thought, was that it covers up the notification light entirely which I consider one of the main reasons why I got an Android phone. Overall great case except for the lack of notification reminders.
c) Commuter, tough like a rock this case hit the ground many times and I was damn glad I had it on because it takes a lot of hits! Again the rubber sheath around the phone left me disgruntled when pressing the volume keys for example. It's a great case for anyone really worried about damaging their wonderful x10. Of course this great prtoection comes at a cost; the Commuter is by far the bulkiest case out there. The rubber innards serve as great protection but I feel like they didn't spend enough time really trying to get a tight fit around the x10. Overall great case for those worry-warts!
d) Silicone/Plastic skin, this was actually my first case and I am not a fan of silicone/plastic cases. I found that they discolour easily, they turn your pockets inside-out when you check your messages, and the protection is minimal. There is just not enough between the phone and the ground I drop it on to really save my phone. I suppose it's better than nothing though. Keys are hard to access through the silicone/plastic even harder than the rubberized bodies on the Alumor and Commuter. Overall it's not a bad alternative if you don't really want a heavy duty case.
e) Invisible Shield, probably a dream come true to anyone who absolutely despises cases. I had a back and front protection on my x10, and I do believe there is an entire body cover package. The invisible shield almost melts to your phone and becomes part of it, the design is fantastic from protection of scratches and nicks. Unfortunetly this isn't a case at all. It's great for scratches, etc. but contributes a minimal amount if you ever drop it on the ground. Zero protection of the corners of the x10. Overall it's the best choice for those who don't want a case.
Alright there's my little rant on cases. Sorry if this has been done over many threads and posts but I thought i might shed some light on the topic. Hope this clears things up for any skeptical people out there.
But the real question is...what's your favourite case?
Leave your awesome responses in the comments and please leave your opinion!
i've got one from unknown brand, hard plastic or something like that, and it's perfect, the buttons are completely accesible because they're not covered, and also it doesn't turn my pockets inside-out. I've also used an invisible shield, which is very good indeed, but the only problem i found was that after some time it starts to get dirty and out of the phone, so i have to remove it and replace with new one. i decided to use the plastic case and the only problem i have is the phone now is not as slim as it is without, like 2mm more than before, but is no problem
Sounds like you've got yourself a great plastic one, very interesting how the buttons are not covered! Maybe ill look around. I'm currently using my Edge and it is great I find. If you ever get the chance or have a little extra money you could try it out.
Sent from my X10i using XDA App
I've got the Otterbox Commuter. I'm not overly worried about breaking my phone but it has saved it on a few occasions. I personally don't find it as bulky as others might but I do agree that the rubbery part could form more nicely to the phone. the top part of the rubber is much looser than I'd like.
@Pawnty, I totally am with you the little slot where the notification light cut out is seems to be incredibly loose. I thought mine was just maybe a deformed one and I got unlucky. Good to know I'm not the only one. Overall though it is a great case IMHO.
Sent from my X10 using XDA App
Also as a recommendation I would try the Incipio Edge its really great, that is if your looking for a switch or just an alternative.
Sent from my X10 using XDA App
i really like the invisible shield! its invisible!
I use back hard mesh cover. 3layered screenguard. GEB leather pouch..... All from ebay
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Would any of these accomodate the larger battery ?
trevagreene said:
Would any of these accomodate the larger battery ?
Click to expand...
Click to collapse
Couldn't get your meaning
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
milton.bain said:
Couldn't get your meaning
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Click to expand...
Click to collapse
A case for xperia x10 which has this battery
http://www.mugen-power-batteries.co...ed-replacement-battery-with-battery-door.html
Hi people. Great thread! I've been searching for this for a while.
I'm thinking about buying a case for my x10. I've already dropped it once, resulting in a broken screen, and I'd really like to avoid having that "accident" twice.
Since I'm from Argentina, I would have to buy it online and have it sent, so I'd really like to be sure of what I'm buying.
I've checked all the ones you mentioned, and I'm still trying to decide between an Edge and a Commuter. However, I wanted to ask you (warning: girlie question ahead): aren't there any cases that come with designs? I don't mean colours only, but pictures or logos or something extra? Something to spice things up! I love my x10, but I'd really like to have something more... bazzinga, let's call it!
Thanks for the post, it's been really helpful!
V3RO said:
Hi people. Great thread! I've been searching for this for a while.
I'm thinking about buying a case for my x10. I've already dropped it once, resulting in a broken screen, and I'd really like to avoid having that "accident" twice.
Since I'm from Argentina, I would have to buy it online and have it sent, so I'd really like to be sure of what I'm buying.
I've checked all the ones you mentioned, and I'm still trying to decide between an Edge and a Commuter. However, I wanted to ask you (warning: girlie question ahead): aren't there any cases that come with designs? I don't mean colours only, but pictures or logos or something extra? Something to spice things up! I love my x10, but I'd really like to have something more... bazzinga, let's call it!
Thanks for the post, it's been really helpful!
Click to expand...
Click to collapse
Yes definitely. There's nothing to be ashamed of designs mate. Just search for "designed/stylish pouch or case or cover".
CheersS!
From X10i on ROM : "ThGo2 v9.3"
using XDA premium

Trident Aegis- Best Case Available

Honestly, this is the best case for the E4GT:
http://www.tridenteer.com/categories/Samsung-Epic-4G-Touch/
Available for $20 on amazon:
http://www.amazon.com/Samsung-Touch...PACW/ref=sr_1_1?ie=UTF8&qid=1327710501&sr=8-1
Its a 2 piece silicone/hard plastic. Perfect snug fit. In fact I messed up my nails trying to take it off to change my screen protector. Not tacky to the touch; slides into pocket no problem. Comes with a clear screen protector. Has covers for the usb and headphone ports.
The side buttons are even easier to press since they stick out even more, and the silicone is extra hard in the buttons so you don't have to press hard at all. Now, if you're looking to keep that slim and lightweight look, this case is not for you. But if you're looking for straight up functionality coupled with unrivaled protection, you NEED this case.
Colors are nice but I think I still prefer my Case Mate Tough
Transmission sent from a Galaxy S II with XDA Premium
Pheno.menon said:
Colors are nice but I think I still prefer my Case Mate Tough
Transmission sent from a Galaxy S II with XDA Premium
Click to expand...
Click to collapse
+1 to that
sent from my E4Gtouch
I'm currently on the S-line TPU Hybrid Case. Worth the upgrade?
I'm also looking at the CM Tough & Seido Active Case
Just got my red aegis today and I can say it is one bad ass case! Best I've used for any phone I've owned in a long time.
Sent from my SPH-D710 using Tapatalk
Ever since i bought this case ... I constantly wonder if girls love me ... or my phone. I don't know who to believe anymore.
I think I'm gonna go for black because all the colors look faded out on the site. Is it just the site or are the colors darker? Pics for people who got different colors such as RED please
locoboi187 said:
I'm currently on the S-line TPU Hybrid Case. Worth the upgrade?
I'm also looking at the CM Tough & Seido Active Case
Click to expand...
Click to collapse
It's absolutely worth the upgrade. I came from the Diztronic TPU case, which was really nice,... good fitment, slim & light. I've had the Aegis on my E4GT for about a week now and it's super. I'm almost glad Otterbox ain't doing anything for this phone. They really screwed da pooch on their Evo 3D case, and I ended up replacing it with an Aegis. So putting one on this phone needed little thought.
Sent from my SPH-D710 using xda premium
I have had this case on for about two weeks. So far so good. Has saved from falls already and keeps the fine dust junk out of the that crack between the screen and the plastic on the phone. I love the side hard buttons, and there is a fine mesh covering the mic and back speaker holes. I got the Ballistic green color. It looks like the website image, just a weee bit darker. weeeee bit. Did nto use the screen protector that came with it, so no comments on that.
Wow,... didn't notice the mesh over the speaker and mic. Added bonus!
My Aegis was here in my box when I came home from a weekend of snowboarding. I feel a lot better with this puppy wrapping up my fon. Looks and feels pretty sweet!
Looks too much like a "case". A fatal cheesifying flaw of almost every case... along with making your uber-thin phone as thick as a deck of cards.
And I'm always dubious about hard plastic. It'll transfer shock to whatever it's against... could be the phone. That'll make the case survive a drop, not the phone. If it's got soft rubber inside the hard plastic, that kind of makes the hard plastic just unneeded bulk... and look like, well, your phone is in a "case".
I am a big fan of my $8 TPU case. That TPU material is the right compromise between hard and soft, and it fits so well it doesn't even look like a case. Looks elegant even, in matte black. I wish they made a white one, would look like a white version of the phone. For the price of this case at the super-discount Amazon price, you'd have two TPU cases plus a few bucks in your pocket.

Categories

Resources