Develop Bugs

Do I really need a flip style case or an I too paranoid?

I'm having some real trouble deciding on a case. I've never used a clip on hard case or any body glove thing for any previous phone cause some people said they damage the phone if it gets dust. I also feel a lot more safe with something covering the screen like with a flip top or a decent leather pouch.
I'm an IT tech and do mostly call out or field work so I'm not always in a hazard free office environment. Something can knock against my pocket or I'll be under a dirty desk etc.
I can fairly easily get hold of a casemate or an otterbox. is this and a screen guard enough or should I be thinking of a leather case? I can get a PDair flip style but not sure I like it from the pics I've seen. I really like the look of the zenus style ones I've seen in a few other threads. Only thing is something like that I need to order from oversea or eBay and will take a while to get to me (I'm in south Africa)
Am I just paranoid because of the screen being left bare ?
Sent from my GT-I9100 using Tapatalk

I had the barely there case on my previous Galaxy s and bought another for my s2. I only had it a day or two and thought it did not do enough to satisfy me that my phone would be protected. The corners are pretty exposed and the screen completely so.
I bought a flip over case from ebay, unable to do a link to it but if you search for
BLACK REAL LEATHER CASE FOR SAMSUNG GALAXY S 2 II i9100 on ebay it will hopefully show you the one i am talking about.
It is extremely low profile, does not add much bulk at all to your phone but i feel totally confident now with my phone when out and about. Feel as if it could survive a drop from a decent height easily. I preferred this case to others as it only has a small magnetic catch at the top holding it shut (effectively) rather than a big catch overlapping and catching when i put it in my pocket. I am sure there must be something similar, closer to home for you. Good luck.

I got a PDair flip-it leather case and i'm pretty cool with it. I also put a screen protector and ta da my phone seems pretty much safe. Since the phone is really thin, i'm more confident when holding the phone with this case and it feels like i'm holding my ex phone HTC Touch HD, acceptable thickness for me. I'll upload some pic as soon as i charge my Touch HD, don't have any other camera around right now

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

If you're planning on using a case that effectively doubles the size of your handset while making a call you might as well just get a DynaTAC.

Get a flip style case with express shipping.
Zenus has diary series too. Highly recommended.

i got the official samsung leather flip and its very good IMO it doesnt add to much bulk aswell

I thought a Flip Top Case will be a perfect one to protect the device and purchased one, pricey one I should say, but now, after a week, I am bored, this thing is a PITA. Receiving the Case Mate Tough on Monday, won't use the current one anymore, damn protection

Sp1tfire said:
I got a PDair flip-it leather case and i'm pretty cool with it. I also put a screen protector and ta da my phone seems pretty much safe. Since the phone is really thin, i'm more confident when holding the phone with this case and it feels like i'm holding my ex phone HTC Touch HD, acceptable thickness for me. I'll upload some pic as soon as i charge my Touch HD, don't have any other camera around right now
Click to expand...
Click to collapse
I decided to give this a try after reading your post. The company here does not have the otterbox cases in stock yet. The Pdair one is almost half the price anyways. If I really dont like it or feel I need something else then i'll get the otterbox also.
I also ordered an SGP oleo screen protector from the SGP store. Will post some pics when I recieve the case. Should take about 10 days.
Thanks for the advice guys!

Ballistic HC Atrix case

Well guys and gals, the HC case is finally available for the Atrix! Mine just came in the mail today!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm going to write up a quick first impressions review for it and post it up here in a bit.
Review is here.

nice job. on the review you might want to compare the prices. was the price of the HC worth it?

I paid $52 with shipping, so it was about $5 more than I got the Defender.

I might end up getting this I'm on my second defender case the first interior shell cracked in one corner and the gel is not standing up to the heat in South Florida, left it in the car a few times and the gel fits oddly now. The Ballistics don't have the gel form fitting exterior so I doubt I'll have a problem with it.

I searched on Google Shopping and eBay and I found this case for $33.50 with regular expedited shipping. It actually arrived at my house in NJ from Texas a day earlier than it was expected.
At first, I was surprised at how much bigger it was than I thought it was going to be, but then I tried it out for a few days and I got use to it. If you want "maximum" protection, I would recommend buying this case. I use the whole setup with both the rubberized and the hard case. I haven't dropped it that many times and when I have it was usually on carpeted floors and occasionally from small heights so I really haven't tested out its durability and whatnot, but it doesn't look like it's going to break or anything. The plugs for the headphone jack as well as for the charging/HDMI ports are an awesome feature for keeping dust and water drops away from the actual phone. The only part I can find that is exposed is that fingerprint/lock button. I understand why, although I don't use the fingerprint feature, so it's not too bad.
It's pretty light and the supplied swivel clip is greatly appreciated, too. It is bulky enough to make it harder to get in and out of pockets so the clip works very nicely, especially since you put the screen facing in to provide as much protection as possible. I have tested how it fits and everything and it stays in the clip even when moving around, jumping, jogging, and shaking so I would say it works pretty well. There's a screen protector on the front part of the hard case, but it's almost as sensitive as the actual phone's screen so you don't have to press much harder than normal. The one other thing I didn't really like was that the HC's bottom was too close to the phone's touch buttons along the bottom, making it slightly harder to press them sometimes. If there was slightly more space between the two as well as a little less bulk, this would be the perfect case for protection and functionality.
Still, a great buy, I must say so myself. I definitely recommend it.

So after a week of having this on my phone the only thing that I could see someone not liking is the volume keys are harder to press. You really got to squeeze on them to get a press to register, but other than that, I really like this case. I might take the phone out and run a file on the bottom edge of the top of the finger print sensor hole. It sticks out a tad, and it kinda sharp. It's only a problem for me when the phone is in my dash mount and not in any car mode. When I swipe my finger "backwards" from the normal top of the phone to the bottom, the edge catches my finger and causes misreads. I think rounding it off a bit will help with that.

I have this case, and i must say - even though its bulky, it feels great in my hands. Its not as annoying as the otterbox defender is/was. it feels much more solid and well built. Also - its certified military grade protection. I got the black/black case in the mail about a week and a half ago - havent taken it off since i put it on! The holster is much better than the Otterbox defender also!

i originally had the shell gel before buying the hardcore. all i can say is this case is awesome!
although i kinda wished the plastic inner case had the rubber port covers as well though, since the whole rubber case makes the thing too chunky for my liking.
one other thing i didnt like is the included screen protector. first, i didnt realise it was attached to the case, lol. but my main issue with it is that it kinda messes with the display a bit. not too sure how to describe it, but it has the random colour pixels that you'd normally see if you had water on your screen. im sure after a week of wearing it in, this should go away.
the thing that annoyed me the most was that for like 3 months, ballistic had a black and red one listed on their website. now all of a sudden, it doesnt exist.

Very nice Tridea case

I've searched high and low for a case that suited me and my Note and eventually found a very nice case from Tridea on eBay. I received a couple of days ago and think that it looks and performs great. You can find it by searching on Tridea.Essentially it's a hard bumper in a nice sort of faux suede flip case. I went for the gray version.
It's a bit pricey at £25 and it took a couple of weeks to arrive from South Korea but I've yet to see a case that looks anywhere near as good for the money.

I just bought one too! It should arrive within a week, I got the same color as you did. I'm glad you like it, because it makes me more excited to get mine

I wanted this case more than most others but my number one issue with them all is that very few have a cut out for the ear piece!! not even a notch, i want my face oils off the screen and not have to hold the flap back on a call, simple design i would think, sigh.

I love this case, I bought the grey one as well. I do wish it had a hole for the speaker though.
Sent from my GT-N7000 using xda premium

Hmm, the front flap does fold round the back when using it to make calls and even gives a bit more of a better grip on the phone so I'm not that bothered about it not having a notch for the earpiece.
lamou1nr: As far as a hole for the speaker goes, it's got one but I guess you meant the same as Mrglass86.
I like the case because 1) it looks good 2) it's very light 3) it offers good bumper protection with the addition of a cover for the front that also keeps the screen clean. 4) it feels really nice and solid without adding a load of bulk to the phone.
I don't see the fascination with the aluminium bumpers. They don't look as though they'd offer any protection in a drop.
I like some of the Zenus cases (it was either the Tridea or the Zenus Capsule case) but they're expensive and the diary types just seem like a bit of a gimmick - would you really keep your cash and cards in the same case as your Note? Not me!
Until otterbox or a similar maker comes up with a really tough aluminium case I'm happy to stick with the Tridea.

If you fold it too often it will eventually get loose or have lines along the edge. Another issue with all such book-like case is that we cannot use our thumb to operate the phone anymore.
Sent from my GT-N7000 using XDA App

Just ordered it. I hope it'll arrive sooner than expected.

Anybody bought this kind of Tridea case? Available on eBay for $22.
http://www.ebay.com/itm/Tridea-Rubb...733?pt=LH_DefaultDomain_0&hash=item1e6b5965b5
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Wow I dont normally like flip cases but this one looks very nice. Not sure if i'll fork out for one as i've already got cases for it but can you guys post pictures when you get it, i'll get a better idea than from the ebay pics

Just thought I'd follow up on my OP. I've been using this case for almost a couple of months. The phone gets a lot of use by me and is constantly being taken in/out of my pockets. I'm happy to say that the case is holding up well. I think that the 'spine' of the cover would be the first part to go since it's the part that gets the most stress.
After two months the fabric along the spine has been smoothed but doesn't look bad, kind of what you'd expect really, it 'weathered'. There is some very thin rubber edging that runs along the edge of the whole case and this has initially split on the spine hinge area but it has only come off in one tiny section. It's hardly noticeable.
The main thing is that it's protected my Note very well. I don't expect a huge lifespan from it (at least the cover) but the bumper around the note will last. I may utilise a bit of gaffer tape to strengthen the spine and you could do this without spoiling the aesthetic if you do it properly. I may also use some rubber spray that I bought from Amazon which is really useful stuff (it coats whatever you spray in a matt rubber coating). One last thing to mention is that some people were bothered that you couldn't get to the volume controls while the case was shut, well you can press the rocker through the spine without any problem so you can use the volume control even with the Note in your pocket. I'll update this if I notice anything further degradation but all-in-all I like this cover a lot still.

My case has also held up reasonably well. It provides great protection. I too had the rubber on the edge ware off but only on the "hinge" of the cover. The only other part that is showing signs of age is the metallic plastic piece that is on the back, it has a few scuffs and a chip. For a flip case this is one of the best.

[User Review] Amzer Pudding TPU Case Black For Moto G

I initially looked at the flip case, but having had a go with a friends, I didn`t like the `flip` when making a call.
I started looking round for alternatives and spotter the Amzer Pudding TPU case.
I wanted something with protection all the way round the phone. I`ve seen several where the corners are exposed. Dropping it on a corner is something I had with an old phone and it immediately cracked the glass, so a fully enclosed cover was top of the list.
This has a `rubberised` texture and in use, it certainly feels grippy. The edges are sticky enough so you won`t drop it easily, but not so bad that you can`t get it in and out of your pocket without it `grabbing` the material. :good:
For £6.50 delivered, I really can`t complain. :good:
Amzer logo embossed onto the rear of the case
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Full edge coverage
Closeup of the corners
Neat cutout for the headphone
Camera & Speaker cutouts
Power and Volume controls are covered, but they are easy to use and I haven`t struggled to press the buttons at all.

By how much does the thickness increase..
i know its too much to ask but if u ever remove the case can u post pictures of case and bare mobile side by side
btw i have never used a tpu case..its is rubbery flexible or plasticky...i have heard that its a combination of both

Wh00sher said:
Dropping it on a corner is something I had with an old phone and it immediately cracked the glass, so a fully enclosed cover was top of the list.
Click to expand...
Click to collapse
But a drop of more than 2-3 feet would probably still break the phone. To get better protection, one should have a case with thick rubber bumpers on the corners like the Trident or Ballistic case. But of course, it wouldn't be as pocket friendly.

I have this case and dislike it. It adds too much thickness for me, but about what you can expect from a TPU case. I buy cases for scratch protection rather than drop protection. I hate the glossy bezel and just wish they had that same back finish for the entire case. The finish of the back is nice since it doesn't pick up fingerprints. The last thing I can't stand is how small the usb connector cutout is. This can probably be fixed with a knife, but it still shouldn't come like that.

is it sturdy material or flexible that it can be like silicon cover in the ease of putting/removing the phone from it?

It is not terribly difficult to put this case on or remove it. One of the best features of this case for me is the matte back section which greatly improves grip and the button molds in the side.
Sent from my XT1034 using XDA Premium 4 mobile app

wolfen69 said:
But a drop of more than 2-3 feet would probably still break the phone. To get better protection, one should have a case with thick rubber bumpers on the corners like the Trident or Ballistic case. But of course, it wouldn't be as pocket friendly.
Click to expand...
Click to collapse
Every time I use a heavy-duty case though I end up removing it after a few months and using a less-protective one because of the bulk, tpu cases seem like an "OK" compromise (or at least I hope).
I've been eyeing the Cruzerlite bugroid ones since watching this IRL drop test (nexus 5) video http://www.youtube.com/watch?v=KY9Svj9fYVg but the Amzer one reviewed here looks very nice :good:

isit a good alternative for the gripshell?
I need a bumper what do you suggest?

It does provide good protection but makes the device look dull. I guess I'll have to buy something else for my wife.
Sent from my Nexus 7

Its very cool, but its expensive. I'm from Spain and this price is elevate for me.
Enviado desde mi XT1032

This was the only tpu case available when the phone first launched online. It is a durable case with good protection, not too bulky. Offers good grip. Overall 7.5/10.

After much ado I finally decided on this case, bought it, received it, liked it at first. Then I had it in my pocket for a day at work.
Took my phone out of my pocket and the screen was covered in little waves of dust. And it had gathered up around the edges. Even had a small piece of plaster or something sticking to the screen.
I work in a dusty environment but this is ridiculous. I didn't have problems with my 3GS or Lumia, and though the bareback Moto G's screen seemed to attract a little more dust than those... This case is a DUST MAGNET.
I wish someone would have mentioned that in any of the dozens and dozens of reviews I'd gone over.

Oneplus One Official Clear Case thoughts

I wish they would have spent more money in the case instead of the box it came in. My thoughts after getting it.. The plastic is very flimsy and cheap and the fit is NOT snug. The case feels very slippery and loose like your either going to drop it because you cannot grip it or eventually it will slide out of the case. I'm very happy with the phone but the clear case is far from good.

My thoughts exactly for the Official OnePlus One Protective Case...which is the same as Clear Case.
See my post in the other topic.

Mine fits well but I completely agree about the not so sure grip of it.

I really love this clear case! Mine fits perfectly. No wiggle room at all. I guess I'm used to the grip as well.

MJHawaii said:
I wish they would have spent more money in the case instead of the box it came in. My thoughts after getting it.. The plastic is very flimsy and cheap and the fit is NOT snug. The case feels very slippery and loose like your either going to drop it because you cannot grip it or eventually it will slide out of the case. I'm very happy with the phone but the clear case is far from good.
Click to expand...
Click to collapse
I'm not a fan of the official case because it doesn't provide any protection, but I haven't experienced issues with the fit or cracking. I remember reading a post by an OPO rep on the OP forums in which he said that delays in restocking their cases were the result of further QC implementation. I'm not saying that's definitely the reason yours fell apart and mine didn't (in the two weeks I used it before receiving a Diztronic case), but I am saying that it might be.
Many other people have reported the same issue as you, so it's clear that it affected a number of people.
I own the orange official case because the clear wasn't available, so that might be a factor in which batches ours came from as well.
At this point, people shouldn't have to rely on the official cases now that the Diztronic and the Tudia are both available. Seidio is considering putting out cases for the OPO as well; you can request the Seidio case you'd prefer on their Product Request page.

I'm sure at some point in the near future we will have more choices on lots of covers. I hope we will see 3rd party custom style swap back covers too. I think I will hold off till then.

The official cases for the One look very similar to what Oppo was shipping for the Find 5's back when I got one. They also cracked at the corners and were flimsy as hell and overpriced. I'd say they just took what Oppo was doing and thought why fix what isn't broken (ie people buy them anyway)

Go with the Pelosi case. Can't go wrong with it.
Sent From My 1+1

I haven't noticed any indications of 'weak spots' in the polycarbonate (where it might break) and the case fits around my OnePlus One just fine, contrary to other's experiences with this case.
As for the feel of it: it's very smooth yet not slippery at all (again, contrary to other's findings).
As you can see, it is a bit scratched up because of it being moved around on a table and/or putting it in my bag, but I think that's okay. It kind of indicates it's being used and adds a bit of character.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Nilscollection said:
I haven't noticed any indications of 'weak spots' in the polycarbonate (where it might break) and the case fits around my OnePlus One just fine, contrary to other's experiences with this case.
As for the feel of it: it's very smooth yet not slippery at all (again, contrary to other's findings).
As you can see, it is a bit scratched up because of it being moved around on a table and/or putting it in my bag, but I think that's okay. It kind of indicates it's being used and adds a bit of character.
Click to expand...
Click to collapse
Does it have a lip to raise the screen off a table etc? Like the diztronic?

It does, but it's not that large. Note that I also have a tempered glass screen protector installed so the glass actually sits on top now.