Related
So it looks like Case-Mate does not make a Barely There type case for the Samsung Captivate. Are there any other good similar options out there?
incipio feather is similar...but its less flexible
For a truly "barely-there" experience, I've just installed a screen protector. Voila!
I used to use what noma_pride mentioned above and was quite happy until recently. The full body skins tend to peel up from the edges and eventually dull overtime requiring replacements which can become quite annoying.
IMO I found no case/skins best. I found these jackets made from microsuede from sfbags.com and they are awesome! Check them out http://www.sfbags.com/products/cellphonecases/cell-phone-cases.php
slntdth93 said:
incipio feather is similar...but its less flexible
Click to expand...
Click to collapse
Picked that up for my wife. She loves it. Thanks.
I personally like the flexible cases that body glove makes. The AT&T store sells this one, but I would not recommend getting it from them. Much cheaper through ebay. I had a hard case that snapped on, but found it covered up the sides and bottom too much. It affected dragging apps from main screen to other screens because you couldn't get your finger far enough to the side for the screens to scroll. Also I purchased a spare battery with battery charger and it was a pain to unsnap the case and swap batteries when I needed to. I have dropped mine with the body glove and phone still looked perfect. I am sure a hard enough drop would still be able to damage it though. The only thing about the body gloves that I think suck is only comes in black or pink.
I have a silicon case I bought in the mall (don't recommend that but I needed one as the lady one broke), and it's awesome. It's a harder silicon that still moved, and grips the phone like a condom. Our was made by an off brand, but I'm sure you can find it easily in any mall or online shop
sent from something somewhere
I think TPU cases are the best. They aren't "barely there" cases but the closest providing all the proctection you need. Price is a plus too. Try searching tpu in ebay
Since a fair few of you will now have one of these, I was just looking to get some thoughts and opinions on one please?
Also I know it can stand vertical with this case on, but can it stand landscape?
Thanks
U can do everything without any trouble, it's a great case.
Sent from my GT-I9100 using XDA Premium
TecQuality said:
U can do everything without any trouble, it's a great case.
Sent from my GT-I9100 using XDA Premium
Click to expand...
Click to collapse
I've seen that it can stand vertical on it's own when the case is on, I was wondering if it could stand landscape too?
Thanks
Sent from my GT-I9100 using Tapatalk
Yeah, it's a great little case. I bought the black one, and i'm looking at getting a blue one next. Really cheap for official ones from Trusted Sellers on ebay (roughly £7 without original packaging, £10 with)
the only downside is it lets dust through the little holes, so you get a neat little dust pattern on the back side of your phone - a regular removal and wipe on your trousers helps.
I've had one on it for about 2 weeks and I like it, only drawback is I had to shave down by USB connector plastic to get it to fit while the case is still on. I ordered another from dealextreme because it was really cheap. I notice the case just touches the mic area but doesnt cover it up. I like it because it's not very bulky and the plastic 'mesh' back fits over a soft case and makes it rigid and easy to hold.
Good luck for u
Got a generic cheap mesh case from eBay, its pretty awesome but as mentioned above, gets a bit dirty after some long time, and mine is cheap enough to start breaking on corners, had a few falls tho, and that's the purpose of a case, so the phone doesn't break instead
I had this case, it was okay at the start but in the end the plastic on the top corner started breaking away. Also the one and only time I dropped my phone with this case on I got a nasty scratch just above the screen where there was no protection. I had to ditch it. I'm using a plain black tpu case now, much more protection. The advantage of the mesh case is that its so slim.
Edit : Oh yea and its a dust magnet.
Got the original mesh case, I dropped it twice since I got it. First time no damage at all, protected the phone nicely. Second time the phone popped out of the case as it hit the floor (shoulder hight, had a nice spin to it also) but both the case and the phone didn't suffer any damage. So I guess it serves it's purpose and looks nice as well.
Aesthetically nice.
Crap if you want proper protection.
I bought it merely to protect the camera and back when I put the phone down to prevent scratching. For overall phone protection it's definitely going to be lacking as the top and bottom edges of the phone aren't covered. The case clips on easily but stays on fairly tightly. The rubbery material gives better grip when holding the phone. Dust does get in over a week or so over the back of the phone, though isn't noticeable with the case on, and can easily be wiped off. I think the case looks pretty nice, all key areas are fully accessible and for the price of about £8 was worth it.
is not compatible for i9100P
I've just buy the genuine Samsung mesh vent case for my Samsung Galaxy S2 win NFC (i9100P) but it is NOT compatible. My colleague on the i9100, not NFC, perfect fit.
Some ideas?
Light, strong and keeps the thinness we all love about our S2s!
Dropped mine a couple of times on to wooden floors and no damage yet
Protects the camera lens too when lying on a flat surface
The dust comments are true but only noticeable when u take the cover off so no big deal and it fits so snugly it kinda looks part of the phone!
To answer original question tho, no only stands in portrait
I got an official Samsung one given with mine. Good at protecting from scuffs when it's on a table or desk but wouldn't like to trust it with protecting my phone from a fall.
That's why it's sat unused in a cupboard at work! If anyone wants it just message me and I'll stick in the post.
Andrewawright said:
I got an official Samsung one given with mine. Good at protecting from scuffs when it's on a table or desk but wouldn't like to trust it with protecting my phone from a fall.
That's why it's sat unused in a cupboard at work! If anyone wants it just message me and I'll stick in the post.
Click to expand...
Click to collapse
I'll take the case if it's on offer, let me know your thoughts on shipping to Australia Figure you sent all your convicts here, so a case shouldn't be a problem
If anybody is wondering about cases, I bought the case mate tough case from amazon last week, it arrived today. Paid about 25 euro inc. postage to ROI.
Case looks good on the phone, its a silicon inner case with a hard polcarbonate shell. Access to all buttons and connections are good. It seems sturdy enough, but I have yet to drop it (I'll update when I drop the phone, it wont take long ) If it bothers anybody, the case makes a hollow noise when you tap the back of it, it annoys me a little, but I cant imagine I'll be tapping the back of the phone that much anyway
A silicon lip around the screen also helps protect the screen if left/dropped on its face, as well as stopping it slipping while left on a hard smooth sloped surface.
The case is about 2 or 3mm thick I would estimate. Most people dont like thick cases, but on the contrary, I kinda like the added bulk, I have big hands.
The back of the case is textured with ridges, but the hard plastic still feels somewhat slippery or something. Its not in any way difficult to hold, but perhaps not as grippy as a rubberised finish would be. An advantage of the hard shell is that it slips effortlessly in and out of your pocket. The small silicon faces exposed don't gather much lint either, and they lose it really easily anyway when you run your finger along them.
A screen protector and screen wiping cloth are included, I havn't tried either of them yet though so cant comment.
Something that's important to point out about this case and other accessories for the wildfire s - I know its been said before, but the wildfire s comes in 2 different sizes. This case fits the european version of the wildfire s, to the best of my knowledge the otterbox case fits the american version. Just be careful when getting a case, I almost bought the otterbox, whick would have been way too large
Overall, first impression is that this is a good case. If you don't like bulk maybe this case isn't for you, it does add quite a bit to the phone size wise, but I have rather a habit of dropping mine so I don't mind, it can use all the protection it can get.
I'm just putting this brief review up for anybody who wants info on it, I'd be happy to answer any questions if I'm leaving out anything.
Laurence
yes otterbox fits the US ones, I've got it and I love it. they appear near-identical to the case-mate one, so just about everything you say applies the same to that. the only big difference is that otterbox has very light texturing on the plastic part.
There is nearly only 3 types of cases out at the market.
First the hard plastic cases that are coming in 2 parts. There are the glossy ones and the trubberized ones in a wide variety of colors and styles at ebay or Amazon. The quality is OK but not perfect. What I like is the good protection in combination with the acceptable increase of size. The problem is that you nearly can't remove the front part of the case without breaking the very small bars fixing the case to the device. I like the rubberized ones most. They are looking more stable to me than the glossy ones. With the case it's more difficult to slide out the QWERTY keyboard. But it's acceptable. What I like very much is the protection of the on/off button and then loudness buttons. Because without the case I öfter press these keys withooany will.
Then there are the leather cases. There are horizontal and vertical ones. I tried to use the ones for the Samsung Galaxy S2 also, they fit. But of course not together with the hard plastic case together. For that I will try cases made for the HTC Sensation XL. I will share my experiences as soon as I get the cases.
The third category are cases that are blocking the hardware keyboard. That unacceptable for me. I tried rubber cases for the Samsung Galaxy S2 and it worked for one but the fitting is not not really good. The thickness of the device is quite different from most other smartphones.
Hope I could help a little bit and will share my upcoming experiences.
Thanks for checking out the cases, did they the leather/rubber ones block the camera at the back or did it have the correct position for the opening?
The leather ones I tried are for pulling out the device before use.
The rubber one I tried had a big camera hole on the back. But I forgot to check the other connector holes but if I remember correctly some cutting work has to be done. But this is possible with the right tools. Sharp knives and hole cutters for leather/paper.
Best thing is to try the case at a shop. Surely some fits better than others. But I think the Galaxy S2 category is the best you can get. The Galaxy Note ones could be also work, because it's taller but thinner.
The first category cases are made for the device and aren't blocking anything.
I wonder if anyone has tried the one-piece Speck cases yet (can't post links yet, but a Google search for "speck captivate glide" should bring up the page on Speck's site). They look good, but I'm curious if they restrict the sliding mechanism or block the keyboard at all.
fatxdad said:
(edited for brevity)
Click to expand...
Click to collapse
Just wanted to share my review, got a hard rubberized case on Amazon from ezbuy123. It's a 2-piece, snap-on. In the past, I've used Otterbox on EVERYTHING, but since they dont have an i927 case out yet, I figured I'd take a chance. The build quality is probably a 3.5/5 - it's hard, it's plastic, it's rubberized, that all is true. The edges of the case around the keyboard area are already starting to get chewed up, and the rubberizing doesnt have any real texture to speak of, I feel like I'm going to drop it when I use it. On the plus side, it isnt a weird neon color, and it doesnt add much bulk or weight to the phone.... All in all, I'd be pressed to give it 4/5 overall, it will definitely be replaced with an Otterbox if they ever decide to make a case for the i927.
Speck Sureslider Case
So I just received the Sureslider case today. I bought it for 24 dollars (from versiomobile before they charged 35 ).
Here's my review on it:
It's a one piece piece that has a hard plastic back with polycarbonate. On the front, it's made up of TPE (thermoplastic elastomer). The TPE gives the case a lip from the screen of the phone. It still slides when you put it on its face but not by much. Only the top part actually clips onto the phone. The back plate just kinda sticks to the phone.. somewhat. There's basically no restriction when you're sliding it, it feels like it's not even there. Regarding the top keys of the qwerty keyboard, it might've moved a nanometer, but not to significant to affect your typing.
Honestly, I don't think the price of $35 is worth it. I'd say it'd be more fair around 13 dollars. It also comes with a one-year warranty, so maybe that's where the high price came from?
The Sureslider case is technically a "one-piece" but when I got it, somehow the connection between the bottom and top part became loose and the top part came out. Needless to say, i thought it was going to be an easy fix. It wasn't . You can't just "slide" it into one piece since there's a hook and a little clip at the bottom to provide stability. After I managed to get the piece together, I went through the packaging, and there was this small instruction slip. It said "If the case becomes separated by mistake, align the two pieces and fit back together."
If you have any questions, feel free to ask.
I got the rubberized texture case from ebay (shop4phree*). 5 bucks included shipping. Just to get something on the phone quick before I scractched it. I have to say for being so cheap it has help up surprisingly well. I was going to go for a higher end case at a later time but it's now going on 2 months and I haven't felt the need to switch. The only drawbacks I can see is it interferes with the smoothness of the slide out keyboard (requires a little more finger power to push it up) and the extra bulk it adds makes your top row of keys a little tight when typing(especially with big fingers).Ive dropped my phone a couple of times and it has held intact.
Im a cheap bastard so my $5 case works great for me.
Amzer cases
Well i managed to snap the feelers on my first case (the black rubberized one), so I've moved on to an Amzer case from Amazon. It's a 2-piece, snap-together advertised as "one piece". The build quality is probably a 3/5 - it's hard, it's plastic, it's rubberized on the back half, but the front half is clear hard-poly that looks awful (definitely not at all like what the pic on Amazon makes it look). It doesnt add much bulk or weight to the phone, but it is slightly bulkier than the previous case I reviewed. Hopefully Otterbox will come up with a case for the i927 soon, I'm quickly tiring of these cases...
L4T
http://www.daydeal.com/home.php?cat=6439
Haven't tried any of them but their stuff is good.
Body Glove Captivate Glide
I just received the Body Glove two-piece case for the Glide. It's $30 from AT&T, but I got it from All4Cellular for less (it's also on Amazon for even cheaper, which is a bit annoying as it was out of stock when I last looked there). It's pricey, but highly reviewed on AT&T's site.
It looks high-quality (none of that gummy rubber sort of stuff) and fits snugly. A bit too snugly, actually, as it was fairly difficult to get on and (according to other owners) nigh impossible to get off. On the plus side, that means it's not going to just pop off in your pocket.
The case fully covers the back of the phone (except for holes for the camera, flash, microphone, speaker, and buttons), and on the front, it covers the bezel. It doesn't interfere with the sliding at all, though the front cover does stick out enough to potentially cause problems with the top row of physical keyboard keys. That said, the keyboard side of the front cover has a little cutout at the bottom that may alleviate that problem a bit. I haven't noticed any major difficulties typing so far.
As with any two-piece case, there's a gap between the pieces where the phone slides, so it's not going to protect from anything getting between the phone halves. Also, it only comes in one color--a metallic blue sort of look--so if that's not your thing, you're out of luck.
I'd give it four out of five stars, knocking off a star for the difficulty in getting it off, though I'd recommend it for the build quality.
Does anyone know of a otterbox case from another phone that would fit this one for protection? (commuter or defender)
And what about silicone cases? Soft ones I mean..
There's a Case Mate Barely There case now available for the Glide, you can find it on Amazon. Did anyone try it?
Mom is with ATT so she picked the Captivate Glide cuz I have Epic. LoL Basically, she also want a slide-out keyboard.
I ordered this for her on eBay.
http://www.daydeal.com/product.php?productid=64678
One problem, the sellers posted different quality. Some say hard plastic and some say rubberized. I went with a seller that said rubberized with good reviews. $7 with free shipping. I'm waiting on that to arrive and see how it feels
Just a question, since I'm not a native english speaker:
what does 'rubberized' mean? Does the term refer to a hard case with soft grip or to a flexible silicone-like case that you can even bend and it keeps the shape?
Thanks
clpo13 said:
I just received the Body Glove two-piece case for the Glide. It's $30 from AT&T, but I got it from All4Cellular for less (it's also on Amazon for even cheaper, which is a bit annoying as it was out of stock when I last looked there). It's pricey, but highly reviewed on AT&T's site.
It looks high-quality (none of that gummy rubber sort of stuff) and fits snugly. A bit too snugly, actually, as it was fairly difficult to get on and (according to other owners) nigh impossible to get off. On the plus side, that means it's not going to just pop off in your pocket.
The case fully covers the back of the phone (except for holes for the camera, flash, microphone, speaker, and buttons), and on the front, it covers the bezel. It doesn't interfere with the sliding at all, though the front cover does stick out enough to potentially cause problems with the top row of physical keyboard keys. That said, the keyboard side of the front cover has a little cutout at the bottom that may alleviate that problem a bit. I haven't noticed any major difficulties typing so far.
As with any two-piece case, there's a gap between the pieces where the phone slides, so it's not going to protect from anything getting between the phone halves. Also, it only comes in one color--a metallic blue sort of look--so if that's not your thing, you're out of luck.
I'd give it four out of five stars, knocking off a star for the difficulty in getting it off, though I'd recommend it for the build quality.
Click to expand...
Click to collapse
I got the same one from AT&T.
I agree with your comments. This case is much better quality than the no-name clear ones I've seen elsewhere. It is a pain to install / remove, but I like it tight, lol. I've had cases for other phones where it comes off easy, and they become a pain in the @ss.
They are the most expensive I've seen, but worth the price if it saves your phone from just one concrete ground fall.
-Am
hard case with soft grip
or you can call it a "grippy" hard case
rafeee2 said:
hard case with soft grip
or you can call it a "grippy" hard case
Click to expand...
Click to collapse
Thank you
just ordered the 3 in 1 combo case/holster for about $18 with free shipping...hoping its worth the money, i like the idea of the holster but i have a feeling the case and holster will be made out of cheap plastic....
rafeee2 said:
There's a Case Mate Barely There case now available for the Glide, you can find it on Amazon. Did anyone try it?
Click to expand...
Click to collapse
in their official site i cant find anything about that case, strange.
http://www.ebay.com/itm/BLACK-IMPAC...212773?pt=PDA_Accessories&hash=item3cc744cd65
Any one had any experience with they look kinda substantial and the price looks really good ?
Found one cheaper and a few other colors
Black
www.ebay.com/itm/270997742788
Purple
www.ebay.com/itm/270997743951
Red/Black
www.ebay.com/itm/280906634909
Just received that one today in Black. Only took 3 days $9.95 + 2.99 shipping. I am however aware that the Coupon Code "THANKYOU" is now supposed to give off an additional 10%.
http://www.accessorytree.com/ksdlc-samgalaxys3black.html
I like it overall for the price. It is only one of many kinds I ordered this week but the 1st to arrive. The kickstand seems OK although I don't have my device yet. Maybe the biggest item I'm slightly wary of, that I'll know more when I get my phone is how well the soft part running both longer sides of the case hold up. That is to say. It's snugness to the sides is possibly suspect over the long run. Regardless, for the price, I'm alright with it. I'm also curious as to how well the kickstand will balance in landscape mode with the phone inside. Again, I'm waiting on my device.
These attached pics may show some things you might want to be aware of. Pic 540 shows the holes that actually secure the sides of softer outer layer with the plastic inner cover. Pic 541 shows the little protrusions on the inner soft side that fit into those cut out holes of the plastic inner shell. Pics 545 & 546 show them both not attached securely and then snug in the notched holes. From an objective standpoint but with no experience of actual use yet, It appears that the durability of that staying snug to those holes and therefore the side of the plastic and thus to your phone may be a little suspect. Of possibly lesser concern, is how well the two plastic inner pieces may stay together. There's not much 'clipping together' going on. But then again the same can be said of some of the Seidio's I've own for other phones. But hey, This is not going to be my primary case. It's what I'd expect for the price, if not slightly better. I got it for the kickstand, although I also have ordered a kickstand case from mobilefun along with a few other cases.
A Reminder: If you don't have anything constructive to add to a discussion, then don't post.
Thank you.
thanks for the pictures MscTch I've ordered one to try while I wait for ballistics to get there case out :thumbup:
Sent from my GT-I9300 using Tapatalk 2