So I just bought the Otterbox Commuter series case. BTW, its a $30-35 case, I got it off Amazon for $19.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've had it about 2-3 weeks now, and I have to say, I'm liking it. It's also paid off too, I've dropped my phone a few times now, and I was happy I had the case on it.
It's a 2-piece case, the first layer being a rubber/silicone "glove" and the 2nd piece is a tough plastic outer shell that holds to the phone and silicone nicely. It also features flaps that cover the hdmi/charging ports and the headphone jack. The headphone jack cover is nice, it prevents water or pocket lint from getting inside, however I'm a bit iffy on the charging port cover. Its a silicone flap about an inch long that just kinda sticks into itself to remain closed. The problem with this design is that the flap opens when stuffed into your pocket, or getting caught up on the fabric and turning your pocket inside out when removing from your pocket. It's not a BIG deal to normal, regular human beings. But for guys who like to wear their sister's jeans, this might not be the phone-case for you.
Another issue, and again, not really a big deal at all, was with the kickstand. This case allows you to still use the Evo's kickstand. However the added size of the case prevents the phone from being very physically stable while using it. If you have your phone plugged in and charging while watching a movie on it using the kickstand, you would have to fight a little bit with the cord to prevent it from pulling the phone over. Not a big deal.
This case might still fit into most car docks. I have the MountTek cd-player mounted dock/holder, and it still fits in there. Not perfectly, but enough to hold it well. I don't know about any others.
At first, the ACTUAL case felt cheap. But after ACTUALLY having it for a while, I do ACTUALLY like it. I ACTUALLY chose the commuter case because I didn't want the bulkiness of the Defender case, but I wanted something more than the Impact. I find that the Commuter case fits the ACTUAL bill perfectly. It ACTUALLY holds well in my hand, and is ACTUALLY great for being able to just set down on the table, as it protects the ACTUAL protruding camera lens, the ACTUAL rear speaker, and the ACTUAL flash LEDs.
Yeah I've had mine for around 6 months maybe more. I forget. I cut off the bottom port protector. My only gripe is if you change batteries often the silicone inner case stretches.
Looks nice just bought the defender on eBay for 30 bucks the company from what I read fixed the kickstand issue.
jasongthang said:
At first, the ACTUAL case felt cheap. But after ACTUALLY having it for a while, I do ACTUALLY like it. I ACTUALLY chose the commuter case because I didn't want the bulkiness of the Defender case, but I wanted something more than the Impact. I find that the Commuter case fits the ACTUAL bill perfectly. It ACTUALLY holds well in my hand, and is ACTUALLY great for being able to just set down on the table, as it protects the ACTUAL protruding camera lens, the ACTUAL rear speaker, and the ACTUAL flash LEDs.
Click to expand...
Click to collapse
Do you suffer from an affliction that forces you to put the word 'actually' in all caps?
OstrichSak said:
Do you suffer from an affliction that forces you to put the word 'actually' in all caps?
Click to expand...
Click to collapse
Lmao just noticed that think he does.
reaper24 said:
Lmao just noticed that think he does.
Click to expand...
Click to collapse
Lol hoping you guys would notice the joke, making fun of a recent YouTube review that showcased a bunch of "actuallys".
reaper24 said:
Looks nice just bought the defender on eBay for 30 bucks the company from what I read fixed the kickstand issue.
Click to expand...
Click to collapse
Yeah, the defender case has its own kickstand. That would be a nice feature on the commuter case, but oh well.
akrod2as said:
Yeah I've had mine for around 6 months maybe more. I forget. I cut off the bottom port protector. My only gripe is if you change batteries often the silicone inner case stretches.
Click to expand...
Click to collapse
yea mine got ripped off
jasongthang said:
Yeah, the defender case has its own kickstand. That would be a nice feature on the commuter case, but oh well.
Click to expand...
Click to collapse
Ya the Kraken case is like the commuter case with the kickstand . I like it don't like the fact dust can and will get in. Happy to give defender a try. Also I know what you tube vid your talkin about
reaper24 said:
Ya the Kraken case is like the commuter case with the kickstand . I like it don't like the fact dust can and will get in. Happy to give defender a try. Also I know what you tube vid your talkin about
Click to expand...
Click to collapse
Dust doesnt really get onto the phone, but the exposed silicone parts do collect dust and lint. Protects the phone though, I can deal with the rest.
I was going to do a video review of this case being completely stereotypical of the youtube videos out there, I was thinking something along the lines of..
"yo whats up its ya boy jasongthang, aka Jason, here to show you the uh... the uh.. Otterbox Def- uh- I mean Commuter case for the HTC Evo. First off, right off the bat, you can actually see the case is actually two pieces".... yada yada
but i didnt want to take away from the review or step on any toes..
I currently am using the Defender series and I can say I am loving it. I had the Impact one before, which was a waste, but Defender is pretty legit.
"Perfect is almost good enough"
I just got the Defender yesterday, and all in all I can say I'm pleased with it. Some reviewers over at Amazon call it "cumbersome," TBH the Evo is cumbersome to begin with.
I've got this as well.
I cut off the part over the charging port and it's much nicer. My only gripe now is that its pretty difficult to press the power button now.
I bought me and my wife the defender series a couple months ago. They were priced at $28 a piece on Newegg at the time.
They are awesome cases, but I have to say that the kickstand on them is cheaply made. Both of our kickstands broke off withing 3 weeks. But, I hardly use the kickstand anyway so it doesnt really bother me.
yeah i just picked up the defender case on ebay, thing is holding up like a champ, been dropped a few times by accident and it takes all the impact, great cases from Otterbox, had one for almost all my phones
The Commuter case is good for me, I actually snapped the bottom portion where the kickstand is shown, but I contacted Otter Box and they sent me a new one. So far so good with this one.
I bought the Otterbox Commuter some time ago to replace a very, very inexpensive silicone "shell" (it only protected the back of my EVO). Thus far, I've been happy with it, too. The supplied screen protector was crap so I replaced it with one from REALOOK. The silicone shell on my Commuter does attract some lint but said lint rubs off easily with a damp thumb moistened from water from a faucet.
I have yet to drop my EVO at all but the Commuter protects it wonderfully from dust and damage from sliding the device across tables, et cetera.
matthewdavisnelson said:
The supplied screen protector was crap so I replaced it with one from REALOOK.
Click to expand...
Click to collapse
Yeah, good point. The screen protector it comes with is worthless. I tried many times to get it on right and it looked horrible. Right now I'm using PhantomSkinz screen protector. Its nice, but it seems the bottom edge is peeling up due to the edge of the case touching it. I have an extra phantomskinz protector and a Zagg, I'll change it out one of these days.
Just got my defender case today, and I love it. I can deal with the slight bulk it adds, got it off of Amazon for $28. Well worth the money.
Sent from ....
I bought a commuter case in November and broke it. It cracked on the weak part by the kick stand. I called and they sent me a defender at no charge. I just put it oj. Bulky but tough. Well see!
Sent from my PC36100 using XDA Premium App
Related
This is my final question about a case for my Evo, Im down to the Seidio Innocase II Surface and the Active which case will be the better choice? I red a couple reviews about the active not fitting correctly and i heard horror stories about the surface scratching the edges
I love my blue Seidio Innocase II Surface Case (looks purple on amazon)... Fits tight, no play. I have to go slow when I put it on so that I don't lift up the edge of my invisashield.
I think my case is the active and I hate it. The back has started to peel and a corner broke like it came unglued. I'm going to get an otterbox instead I think.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nefariouss said:
I think my case is the active and I hate it. The back has started to peel and a corner broke like it came unglued. I'm going to get an otterbox instead I think.
Click to expand...
Click to collapse
Looks like you have the innocase active limited edition, available only through amazon. I have the same and the plastic skeleton doesn't fit 100% perfectly, but it's not bad. I too had some clips (top and bottom right) break off, but mine gets banged up a lot while i'm at work so I wasn't too surprised.
The regular innocase active looks like the skeleton has been enlarged to prevent the clips from breaking.
I just ordered an otterbox commuter case and a seidio innocase rugged combo.
Personally, I like having the combo of a hard shell with the soft cushion of the silicone.
-SLS-
Nefariouss said:
I think my case is the active and I hate it. The back has started to peel and a corner broke like it came unglued. I'm going to get an otterbox instead I think.
Click to expand...
Click to collapse
I had the exact same thing happen, but sedio did honor the warranty. Just a thought.
I bought the PT brand from Best Buy today and I believe it is the same as the surface. It is made by Seidio but labeled differently.
I love it. Doesn't add much bulk and feels good in the hand.
Well maybe I'll give them a call about the warranty. I like the overall case design just disappointed in the flaws I've had with it so far. Thanks for the heads up.
Nefariouss said:
Well maybe I'll give them a call about the warranty. I like the overall case design just disappointed in the flaws I've had with it so far. Thanks for the heads up.
Click to expand...
Click to collapse
I'm in the same boat, my rugged has had the corners break off both on my case and my wife's.
I don't think I want to pay for the shipping to replace it through warranty though...I think I may just wait for TridentCase to make a Kraken case for the Evo.
Well, just got the seidio rugged case today and i'm really not impressed. Basically a larger version of the active limited edition. The plastic skeleton seems better quality though. Cheap port covers. My suggestions to seidio: take the rugged and shrink it to fit without the surface. Then make the belt clip so the phone can be inserted face in AND face out and reconfigure the top latch to be smaller/smoother.
Long story short, I switched back to my active limited while I wait for the trident cyclops and the otterbox commuter cases that I ordered to arrive.
Ps: I noticed that the exoskelleton from the rugged fits PERFECTLY over the one from the active limited.
-SLS-
Nothing beats OtterBox cases NOTHING!!
Sent from my PC36100 using XDA App
JArcher84 said:
Nothing beats OtterBox cases NOTHING!!
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Except apparently themselves. Late to the market, they've lost a ton of sales.
SouL Shadow said:
My suggestions to seidio: take the rugged and shrink it to fit without the surface.
Click to expand...
Click to collapse
I don't think I understand. It seems like you are telling them to make the Active, they already do that.
SouL Shadow said:
Looks like you have the innocase active limited edition, available only through amazon. I have the same and the plastic skeleton doesn't fit 100% perfectly, but it's not bad. I too had some clips (top and bottom right) break off, but mine gets banged up a lot while i'm at work so I wasn't too surprised.
The regular innocase active looks like the skeleton has been enlarged to prevent the clips from breaking.
I just ordered an otterbox commuter case and a seidio innocase rugged combo.
Personally, I like having the combo of a hard shell with the soft cushion of the silicone.
-SLS-
Click to expand...
Click to collapse
No problems with my innocase active I got from eBay, I've seen a lot of people complaining about the limited edition one Amazon sells, very happy with mine though, and ebay had it cheaper than seidio's website. The otterbox isn't bad but only comes in one color I think.
Sent from my PC36100 using Tapatalk
bharris25 said:
No problems with my innocase active I got from eBay, I've seen a lot of people complaining about the limited edition one Amazon sells, very happy with mine though, and ebay had it cheaper than seidio's website. The otterbox isn't bad but only comes in one color I think.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Hate to be a bother, but anyway you or anyone can post pictures of their Active case? I'm on the fence about buying one, and if I do it'll be the Active case with holster combo.
Seidio says the camera does not touch any flat surface with the case, and it actually looks as if it doesn't add TOO much bulk to the phone like some others, and a couple of the Otterbox's I was looking at fall into that category.
aronslusa said:
Hate to be a bother, but anyway you or anyone can post pictures of their Active case? I'm on the fence about buying one, and if I do it'll be the Active case with holster combo.
Seidio says the camera does not touch any flat surface with the case, and it actually looks as if it doesn't add TOO much bulk to the phone like some others, and a couple of the Otterbox's I was looking at fall into that category.
Click to expand...
Click to collapse
The camera does not touch on a flat surface.
The case adds very little bulk, but it will sure seem like it does when you hold the evo naked after using it a while. Same for any case of this type.
I have the regular active (not the LE with smaller outer shell) and the rubbery outer coating has worn off in the corners like in the pics of the LE that were posted. I'm sure this is due to my using it in a snug leather case, and is confined to the corners. No big deal to me. You can only tell if you look closely.
As far as fit goes, it is snug and well designed. Button use is as good as naked. Only complaint is dust builds up slowly on the left side where the outer shell fits into the soft inner layer. I take it apart and rinse the soft layer off every couple weeks.
My phone has taken several 3ft drops (off desk, out of shirt pocket while tying shoe lace) and is completely unharmed.
Is it the best case in the world? Maybe not, but it is comfortable to hold and protects the phone very well.
If this one were to break, I may try the otterbox but I'm not parting with it any time soon.
The pictures on Seidio's web site are better than what I could send you.
JAson
JArcher84 said:
Nothing beats OtterBox cases NOTHING!!
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
fanboy much?
I have the New Blue/Black Active Case and i LOVE it it fits perfectly its easy to take off if you need to swap batteries or put it in a dock, the new STyle Active is very durable doesn't crack easily.
Ive had mine for months now and the only visable issue with the back is where the Seidio name is its rubbing off from being set down and rubbed against other than that it's great it fits perfectly doesn't shift no gaps nothing.
the pictures they posted for the active in the beginning of this post is from the Active LIMITED it was their trial run before they changed it to the new Style
This is The New Active Case
Hey everyone, I received my TPU case from EBay (item 290530353216) today, here are some comments and pics. The fit is only OK - the cutout for the USB/HDMI ports is a little off, and there is a little bit of an edge around the power button that impedes fingerprint swipability a little. I will say too that I didn't expect it to have the goofy pattern - what is it with TPU cases and argyle patterns?? Also, as you've noticed it is somewhat translucent.
I give it a 3/5. $7 shipped in the US. I'll keep it until another inexpensive case rolls around that is higher quality.
And just in case anyone wonders, on my screen are the Pandora Widget, Android Agenda Widget, and some apps. I am running ADW Launcher (free). Also, I know I left my back panel sticker on there, and that was on purpose.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yeah seriously with the frikin argyle ****! Its like they made a billion sheets of the argyle TPU and they just like heat mold them to phones (not like thats how they're made). This will be my third phone encased in argyle TPU. Other two were the dark one like yours, this time I got sick of trying to hide the argyle and people asking about the stupid pattern. I got clear so, "yes its frikin argyle! got a problem!?"
Waiting for the Realook screen protectors to be cut. no idea why it takes them so long to cut the right size. Realooks are by far the best screens...
Everything is temporary at this point...I'll buy nicer stuff once my 30 days are up.
I was fortunate enough to have a solid black non-patterned TPU case for my EVO that someone on this forum actually commissioned and was selling out of their garage essentially.
Check out tpu-cases.com. I bought an all black one there, shipped same day. Quality is nice, it's glossy, feels good in the hand for an 8$ case.
the 1.99 one I got from ebay is decent
Nice, never seen that site before. I'll order one up and hopefully it'll get here by the time I'm home from travel. Wish someone would make one like I had for my Evo though - it was matte on the back and shiny on the front.
daveop said:
Check out tpu-cases.com. I bought an all black one there, shipped same day. Quality is nice, it's glossy, feels good in the hand for an 8$ case.
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
Well I tried the Speck (or whatever it's called) case from AT&T and hated it...looked and felt like a toy.
Then I tried the Otterbox Impact (the smallest case they make). It's made of a type of rubber that sucks up all dust and won't let it go. It's pure black rubber but after putting it in my pocket and driving up to Starbucks to meet some friends...it looked gray. My pockets don't have any lint or anything in them...and yet the case now looks completely gray. I just put it on yesterday. It's also a bit big for my tastes...and the phone can easily come out of the bottom.
I'm going to try the cheapest cases on eBay. They always worked great for my Nexus 1 and most other phones I've used. The cheap thin rubber is fantastic for me. The phone's so freaking sexy...I just don't want to add a bunch of mass to it.
hotleadsingerguy said:
Well I tried the Speck (or whatever it's called) case from AT&T and hated it...looked and felt like a toy.
Then I tried the Otterbox Impact (the smallest case they make). It's made of a type of rubber that sucks up all dust and won't let it go. It's pure black rubber but after putting it in my pocket and driving up to Starbucks to meet some friends...it looked gray. My pockets don't have any lint or anything in them...and yet the case now looks completely gray. I just put it on yesterday. It's also a bit big for my tastes...and the phone can easily come out of the bottom.
I'm going to try the cheapest cases on eBay. They always worked great for my Nexus 1 and most other phones I've used. The cheap thin rubber is fantastic for me. The phone's so freaking sexy...I just don't want to add a bunch of mass to it.
Click to expand...
Click to collapse
You can try the Incipio Feather. I purchased it yesterday and I like a lot.
Fixter said:
You can try the Incipio Feather. I purchased it yesterday and I like a lot.
Click to expand...
Click to collapse
i like the feather as well. not much in terms of impact protection, but most of my scratches come from the phone vibrating on the desk over time and scuffing the battery door, so its a nice line of defense against that. also, its a little less slippery than the standard battery door which i like
domin8 said:
i like the feather as well. not much in terms of impact protection, but most of my scratches come from the phone vibrating on the desk over time and scuffing the battery door, so its a nice line of defense against that. also, its a little less slippery than the standard battery door which i like
Click to expand...
Click to collapse
Yeah its great for worrying less about the normal wear and tear.
I particular like the argyle tpu cases which give decent protection and feel. i have it for the ipad, galaxy tab, atrix, inspire, and xoom.
www.degasis.net offers these as well
I ordered my case from http://www.degasis.net/models/atrix.html (as the poster above recommended. $6.98 shipped
This is the best fitting TPU case I've had across all my devices. The best part is that it actually makes the on/off button easier to push and the finger scanner easier to operate (its cut at the perfect angle to compliment it). Its slightly different cut but a better fit than the pictures posted above.
I'll post pictures when I come across another camera some time today or tomorrow.
TPU is far superior to any other case material in my book. perfect balance of grip/non-stick, thinness, protection, and fit.
eatkabab said:
I ordered my case from http://www.degasis.net/models/atrix.html (as the poster above recommended. $6.98 shipped
TPU is far superior to any other case material in my book. perfect balance of grip/non-stick, thinness, protection, and fit.
Click to expand...
Click to collapse
looks exactly like the case i got from ebay for $1.99 lol
Incipio protection?
Fixter said:
You can try the Incipio Feather. I purchased it yesterday and I like a lot.
Click to expand...
Click to collapse
I really like the look and feel of the Incipio low profile cases. Do you feel like it would do any good if you dropped the phone?
grayfoxx said:
I really like the look and feel of the Incipio low profile cases. Do you feel like it would do any good if you dropped the phone?
Click to expand...
Click to collapse
That's the problem I have with the feather - it doesn't protect either end of the device, only the sides and back.
Judging by the picture, it looks like you have that "textured" screen protector. What is the screen protector you are using? Those are my favorite kinds and I have been trying to find one for a while! thanks in advance
Kbc, who are you asking? I'm using an AT&T screen protector. It's matte and perfectly smooth.
kbc88 said:
Judging by the picture, it looks like you have that "textured" screen protector. What is the screen protector you are using? Those are my favorite kinds and I have been trying to find one for a while! thanks in advance
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
phobos512 said:
Nice, never seen that site before. I'll order one up and hopefully it'll get here by the time I'm home from travel. Wish someone would make one like I had for my Evo though - it was matte on the back and shiny on the front.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Sounds similar to the one i had on my desire but I cant find it anywhere now
eatkabab said:
This is the best fitting TPU case I've had across all my devices. The best part is that it actually makes the on/off button easier to push and the finger scanner easier to operate (its cut at the perfect angle to compliment it). Its slightly different cut but a better fit than the pictures posted above.
Click to expand...
Click to collapse
OK, you've sold me on this case Good description of how it is, what colour did you get?
I've been using Seidio products for quite a few years now on my phones. It started back with the Blackberry Pearl. Since that first experience, I had decided that this was a brand of protection I was going to use on all future phones. Of course, that didnt keep me from trying others as well, just knew it would be the one I would keep.
Most recently I picked up a Motorola Atrix to replace my Nexus One. The whole time I had my Nexus One it was shielded with a Seidio Innocase cover. Unfortunately, when I picked up my Atrix there was no Seidio available, yet. In that time I decided to pick up the Otterbox Defender case. I had never used an Otterbox case before but after receiving the product, I deemed it way too bulky for my daily use and promptly put it back in its packaging.
My favorite parts of Sedio Cases are that Innocase II Surface is designed to protect your phone from scratches and drops while barely adding to the size of your phone. Many users find their sleek design easier to grip than a bare device due to their signature soft touch finish, which enhances the look of the phone and does not attract lint. This is huge for me because I put my phone in my pocket most of the time. This case easily slides in and out of the pocket without sticking or creating more bulk. The Otterbox had a soft rubber outer seal which stuck to the pocket and constantly needed cleaning of lint.
One of the other design features I've become quite fond of is their unique slide-in design which makes putting on and removing your case easy. One piece slides on the top and then the other the bottom and they form a clasp that holds together. This is much easier than the Otterbox which is multiple pieces with an additional piece surrounding all of that. If you ever have to do a battery pull, you know how frustrating it is when you cant get your case off easily. That being said, the Innocase is not simple protection either like a cheapo case you pull off the rack and fit the phone into.
I also liked that I have full access to the screen. I dont use any screen protector and the edges of the Innocase are raised just enough that if I placed the phone face down, the screen wouldn't touch. However, if I chose to put on some type of film, it wouldn't inhibit the use of the case either. Unlike with the Otterbox, it has the film built into the case which would sometimes create blotches where it touched the screen.
When using the case it immediately felt comfortable and while I noticed slightly more material to grip the phone with, I was still able to use all the buttons with ease. The fingerprint reader opening is designed so that the finger easily slides in the same manner as without the case, yet still protects it. The volume buttons were easily manipulated as well and all the ports were very accessible yet clearly protected.
The only downside to this case, and pretty much any other case out there, is that it does need to be removed in order to fit into a dock. I have the standard dock and no matter what angle I tried, the phone with the case on wont fit. Again, this is a situation where having an easily removable(yet sturdy) case is a lot less frustrating than a more difficult one. Especially if you're using the dock every night.
EDIT: As pointed out by another member, the dock DOES work. I had no clue the base of the dock pops out to allow more access to the USB pin via phones with cases. So even with the case on, it WILL work on the bedside(standard) dock.
Overall Im very happy with this case and is the one I've been waiting to come out for the phone. The other nice thing about the Seidio cases is their matching holster. These are just as slim without the bulk. Plus the have the ability to lock the phone into the holster, thereby eliminating accidental removal.
There might be other designs or knockoffs of this product, but there really is only one Innocase.
Please find pictures below comparing the case with the phone, my old Nexus One with a Seidio Innocase II and an Atrix Otterbox Defender case.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thanks for the review! i've been hoping to see some non-seidio pics of this for a while. do you happen to have any full-case shots of it without any comparison cases? i.e. just the phone and case itself, also the back of the case, etc?
dLo GSR said:
thanks for the review! i've been hoping to see some non-seidio pics of this for a while. do you happen to have any full-case shots of it without any comparison cases? i.e. just the phone and case itself, also the back of the case, etc?
Click to expand...
Click to collapse
The first picture should be of just the phone and the case side by side. Ill post a pic of the back of the case shortly. Are there any other case shots requested?
thanks for hte review, i had the innocase for my captivate and the one thing that really bothered me was how the lip on the edge of the case around around the screen is raised so dirt always got trapped between the screen and under the edge of the case. is this a problem with the atrix?
neotekz said:
thanks for hte review, i had the innocase for my captivate and the one thing that really bothered me was how the lip on the edge of the case around around the screen is raised so dirt always got trapped between the screen and under the edge of the case. is this a problem with the atrix?
Click to expand...
Click to collapse
Ive never had any issues with dirt getting trapped under my Seidio cases. I can tell you that with this Atrix case, its very form fitting and Id be surprised if dirt got under the edge.
This seems an awesome review for the seidio case for the ATRIX... Can someone suggest a nice and (cheaper ) place where I can get this awesome piece of hardware??
HyperM3 said:
Ive never had any issues with dirt getting trapped under my Seidio cases. I can tell you that with this Atrix case, its very form fitting and Id be surprised if dirt got under the edge.
Click to expand...
Click to collapse
I disagree with what you are saying. Dust gets trapped there like any other case that is raised like that. It's not a huge problem for me, but I find myself detaching the case and just wiping quickly when my pockets are too linty. But it isn't a huge problem for me.
If anyone is interested. The black case with bundled holster/clip is shipping now. The colored ones were still showing "Soon". I have it on the way.
I did not see anything on the clip in the OPs review, so when i get it i will followup with pics.
I also had an N1 with the same case. BEST case ever, is correct. I need to know if the Atrix combo will work with the car dock?
Sent from my MB860 using XDA App
I had a Seidio on my Nexus 1 and loved it. This one is just as nice. My only gripe is how tough it is to remove. The N1 case had a little give, this one won't budge. For me the only way to remove it was to slip a plastic shim under the locking tab.
Phutchi said:
If anyone is interested. The black case with bundled holster/clip is shipping now. The colored ones were still showing "Soon". I have it on the way.
I did not see anything on the clip in the OPs review, so when i get it i will followup with pics.
Click to expand...
Click to collapse
Here are pics with the case and the clip.
So far so good. I am very pleased with this case/clip. I have to carry 2 phones and my old holster seemed to just be too bulky.
The phone sits in it securely
Its sturdy, the clip is secured with a brass rivet and not a plastic one so should take a lot of force to break.. The clip swivels so you can have it Vert or Horiz on your belt.
The spring on the top does not seem to have the same tension as the one for my blackberry so I have been nervous about setting it horizontal.
Phutchi said:
Here are pics with the case and the clip.
So far so good. I am very pleased with this case/clip. I have to carry 2 phones and my old holster seemed to just be too bulky.
The phone sits in it securely
Its sturdy, the clip is secured with a brass rivet and not a plastic one so should take a lot of force to break.. The clip swivels so you can have it Vert or Horiz on your belt.
The spring on the top does not seem to have the same tension as the one for my blackberry so I have been nervous about setting it horizontal.
Click to expand...
Click to collapse
heh it looks like your speaker grill has the fignernail indent from thinking it was the power button? you can easily press/smooth it back out next time you have your battery cover off. it bends back just as easily
joeryu said:
heh it looks like your speaker grill has the fignernail indent from thinking it was the power button? you can easily press/smooth it back out next time you have your battery cover off. it bends back just as easily
Click to expand...
Click to collapse
Ya I got that trying to use the phone at 3am. I have a very loud and annoying notification set for an emergency email address that use for work. It went off and i had a hell of a time waking it up
I just ordered this case after spending 3 days with the Otterbox Impact. Otterbox makes excellent cases, but the Impact is just a silicone case that doesn't fit as snug as I wanted.
Hopefully it will be as good as people say when it arrives in a few days.
I just ordered it too - should be here around Wednesday. I'll report back with my findings. Based on your review though, I'm pretty excited about it. I don't normally spring for cases.
It arrived today!
It's sweet. I'm too lazy to post pictures.
It's a super snug fitting case, and it's not obnoxiously branded (ahem, speck cases), and it has a good feel in your hands. It also barely adds on any thickness to the already very thin Atrix.
All in all an excellent investment in my opinion.
i am from Argentina, anyone know if they shipping? as charged? many
thanks!
Hey guys! I just got my case in the mail today and after using it for a full day, I can say that I love it.
The added bulk isn't too noticeable. In fact, I find it easier to grip the phone with the case on. The soft-touch plastic is wonderful, though it does stick a bit when I put it in my pocket.
One nice touch I've found, whether intentional or not, is that the case helps direct sound from the back speaker. I found watching shows on my phone to be noticeable louder.
10/10!
I've been through a few cases since I got my Atrix. This one is BY FAR the best I've used so far.
DK
Came across these by accident. I LOVE THEM! I was looking at the cases available for the Infuse, and found this odd brand by the name of Ballistic making a case for it. I became jealous and Googled them. Google took me to their website which I discovered, OUR PHONE is supported!
Here's the link (they are $35 & $50 for the one on the right): http://www.goballisticcase.com/products/motorola-atrix-ballistic-sg-series-case
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These are great if you have a UHaul to carry your phone around in after you have encased it in this thing!
The second one from the right...
It looks like it would suck to wake the phone up or use the fingerprint sensor.
And taking this on a plane TSA would think it's a bomb
Mgamerz said:
And taking this on a plane TSA would think it's a bomb
Click to expand...
Click to collapse
Wait!............You haven't seen the commercial???.............It's a phone that acts like a laptop............or, it's a laptop that acts like a phone............no way this could be a bomb!
Bomb bomb bomb............bomb bomb ba bomb..............."Doing Atrix the Focker way"!
CaelanT said:
Wait!............You haven't seen the commercial???.............It's a phone that acts like a laptop............or, it's a laptop that acts like a phone............no way this could be a bomb!
Bomb bomb bomb............bomb bomb ba bomb..............."Doing Atrix the Focker way"!
Click to expand...
Click to collapse
Haha!
Sent from a Honeyglowin' Atrix
kimmikolter said:
Came across these by accident. I LOVE THEM! I was looking at the cases available for the Infuse, and found this odd brand by the name of Ballistic making a case for it. I became jealous and Googled them. Google took me to their website which I discovered, OUR PHONE is supported!
Here's the link (they are $35 & $50 for the one on the right): http://www.goballisticcase.com/products/motorola-atrix-ballistic-sg-series-case
Click to expand...
Click to collapse
Just emailed them to let me know when they are available. I have the otterbox defender and while I usually recommend them, the one for the atrix has issues. I'm on my second outer silicone part, and this one doesn't fit right either. The bottom corners bulge away from the inner plastic part, which makes them come off pretty easy.
barry99705 said:
Just emailed them to let me know when they are available. I have the otterbox defender and while I usually recommend them, the one for the atrix has issues. I'm on my second outer silicone part, and this one doesn't fit right either. The bottom corners bulge away from the inner plastic part, which makes them come off pretty easy.
Click to expand...
Click to collapse
x2
The cases happen to be made right here in Fort Lauderdale on the other side of town. I may go get one on Monday. I have the Commuter case which I like, especially since the ports and earphone jack have covers to keep out dust and dirt and the case is easy to get on and off. I dunno if the ballistic has covers and there are no pictures of the front i can find but the design and colors look nice and I am sure the protection is good. Anyone get one yet?
Damn that thing looks thicker then my otterbox defender case. I like the color schemes though. Does it come with a holster? I have to use the holster with my defender case, just to hard putting it in my pocket.
sifon187 said:
Damn that thing looks thicker then my otterbox defender case. I like the color schemes though. Does it come with a holster? I have to use the holster with my defender case, just to hard putting it in my pocket.
Click to expand...
Click to collapse
Yea, the big one comes with one, at least it's in the pictures....
panflute said:
The cases happen to be made right here in Fort Lauderdale on the other side of town. I may go get one on Monday. I have the Commuter case which I like, especially since the ports and earphone jack have covers to keep out dust and dirt and the case is easy to get on and off. I dunno if the ballistic has covers and there are no pictures of the front i can find but the design and colors look nice and I am sure the protection is good. Anyone get one yet?
Click to expand...
Click to collapse
Let us know if you get one. I definitely want one! Black on black is my choice, but the red/black looks pretty cool too.
Awesome!
Got my Ballistic SG
Well I recieved my Ballistic SG in the mail today, got it off ebay for $22 bucks! I haven't bought a lot of cases for my Atrix yet, I tried a Otterbox Impact on launch day and was disappointed with that. This case however feels extremely tough, My brother has the Otterbox Commuter, which i thought was awesome untill this one showed up. It feels very solid, The ports on the side are left exposed, as well as the speaker grill. The space for the fingerprint sensor does feel a slight bit cramped when swiping downwards, I may have to re-enter my prints to get it to read more accurately, but for now it doesn't seem to affect it too much. I've only had it for about 30 minutes but so far i'm impressed. The case doesn't slide around on the phone (though that may be in part to my invisible shield). The rubber/silicone layer does attract dust, but overall I'm happy with my purchase. I attached a few pictures if anyone's interested.
Reaverofdawn said:
Well I recieved my Ballistic SG in the mail today, got it off ebay for $22 bucks! I haven't bought a lot of cases for my Atrix yet, I tried a Otterbox Impact on launch day and was disappointed with that. This case however feels extremely tough, My brother has the Otterbox Commuter, which i thought was awesome untill this one showed up. It feels very solid, The ports on the side are left exposed, as well as the speaker grill. The space for the fingerprint sensor does feel a slight bit cramped when swiping downwards, I may have to re-enter my prints to get it to read more accurately, but for now it doesn't seem to affect it too much. I've only had it for about 30 minutes but so far i'm impressed. The case doesn't slide around on the phone (though that may be in part to my invisible shield). The rubber/silicone layer does attract dust, but overall I'm happy with my purchase. I attached a few pictures if anyone's interested.
Click to expand...
Click to collapse
Not a bad looking case ya got there... is it rubber or plastic or both?
Edit: so the grey is rubber, red is plastic?
Sent from my Motorola Atrix 4G on the network with the most backhaul, whatever that is. This post might have errors as I hate touchscreen keyboards.
Yeah, the black part is rubber, the red is plastic, with a weird layer of black, that feels like slightly rubberized plastic. After using it for a few hours now I'm still satisfied with it. Definitely feels more solid than my brothers commuter case. Now to wait for the HC to be released and try that sucker out.
Dude, that's freaking sweet looking. Can't wait for the HC cases to be released.
Reaverofdawn said:
Yeah, the black part is rubber, the red is plastic, with a weird layer of black, that feels like slightly rubberized plastic. After using it for a few hours now I'm still satisfied with it. Definitely feels more solid than my brothers commuter case. Now to wait for the HC to be released and try that sucker out.
Click to expand...
Click to collapse
Can you please drop your phone from the second or third floor while it's in the case and if nothing happens can you drop it without a case? I just want to check how though is the case before investing in it.
fincan said:
Can you please drop your phone from the second or third floor while it's in the case and if nothing happens can you drop it without a case? I just want to check how though is the case before investing in it.
Click to expand...
Click to collapse
epic !
I like it! May replace my Commuter, even though I couldnt be happier with the OB.
covered ports
I did not buy this case (yet). It looks really similar to the Commuter case as the designs are the same///a soft rubber held on with a hard plastic. However, the ports are not covered on this one. On the commuter both ports are covered in addition to the earphone jack. Someone here reported dust on the inside of the screen and it may have entered thru the earphone jack? On my wish list is a case with a built in stand.
Hey everyone so I just received this case and I wanted to give you guys a rundown on what I think about it.
So the case in question is this one. As you can see from the pictures it is a hard 1-piece case that snaps on to the phone, as well as a holster with a soft fabric lining that will not scratch the screen, and a kickstand.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The case itself is very nice. It has a good solid fit with the phone, no moving or sliding off here. It is made of a rubberized material that feels good in the hand, and the texture on the back provides a good grip. There are cutouts for the power and volume buttons so they are easy to press. As with most cases of this style, the top and bottom of the phone are exposed, BUT the case goes around the corners and extends off the top/bottom ever so slightly, that the case should absorb the main blunt of the impact, should the phone land on that position. The case comes up about 1mm off the screen so that the screen will not touch the surface if you place it face down. All in all I like the way it looks and feels, and I feel it provides adequate protection to the phone.
The holster is made of the same material as the case. Once again, the finish feels good in the hand. It has 3 "arms" that secure the phone in place when it is in the holster. It snaps into place and it feels secure and sturdy. The phone can be put into the holster with either the screen facing in or out. There is a soft fabric material on the inner side of the holster that protects the screen from scratching when the phone is mounted with the screen facing in. The clip on the holster is the star here, because it doubles as a kickstand. It rotates 180 degrees which allows you to position it any way you want. You simply open the clip and pull out a metal prop to keep the clip in its open position, and you've got yourself a kickstand. Another useful feature is that you can mount the clip onto the vents in your car to use it to hold the phone while using GPS navigation. This is really handy for those of use who live in a state where it's illegal to mount a GPS device on the windshield. Once again the holster is superb and incredibly useful.
Overall I'd definitely recommend this case to anyone who wants something sleek that doesn't add a lot of bulk, but that still wants good protection against drops. The holster with the kickstand makes it great for watching movies and videos. And the fact that you can mount it on your car vents for GPS navigation make this an awesome product. I definitely recommend!
WARNING:There is a similar case for this phone on eBay, but it is NOT the same! DO NOT BUY IT! I bought both and the eBay one is garbage! It doesn't even fit properly, adds a lot more bulk, and you can't mount the phone on the holster with the screen facing out (essentially making the kickstand feature useless!!).
Here is how to tell the difference: The ebay ones have only TWO "arms" to secure the phone:
And they have a SMALL cutout by the speaker, instead of a big one like the Boxwave one:
Don't buy the ebay ones they are garbage (unless you find a boxwave case on ebay). Don't make the same mistake I did.
Nice review. Now only if someone would make an ultra thin snap on case with a kickstand. Had one for my iphone and loved it.
Sent from my SGH-T989 using XDA App
Yeah I also wanted something thin that didn't add a lot of bulk. I think this fits that need.
It is nice and it doesn't add too much bulk. I just wish it had a locking clip on the top. Great buy for $13 bucks.
Sent from my Xoom using xda premium
I really appreciate the review. It's EXACTLY the case i want. I've seen the boxwave for the Galaxy Nexus and Iphone up close first and and really like them. I also saw the cheap knockoff on the iphone and after one drop and keeping it in the pocket, the exterior matte finish was wearing off badly.
I have this Boxwave product as well. It's very nice. The stand feature works well and this case doesn't add much bulk at all. It's keeper.
Just thought I'd give an update. My boxwaves matte finish is wearing off after one week of use.
Sent from my Nexus One using xda premium
ive had 2 of them...although the case itself is nice and i really liked the belt clip and overall design..they are only like $12 on ebay, you get what you pay for...the belt clip broke off on both of them and i wasnt even doing anything...just a small nudge and the cheap plastic that holds it broke...i have given up on this case/belt combo...now im back to the old tpu case i bought and it works a lot better, i dont have to worry about breaking it
Not impressed.... Seidio is much better and you can order a holster too. Great fit and quality. Highly recommended.
Sent from my SGH-T989 using Tapatalk
I ordered a sgs2 yesterday since it was free .. don't have the phone yet but I actually was looking at this along w a tpu case. I like the holster look but wanted protection for top and bottom too. I was wondering if anyone knows if a tpu case can fit it in.
Sent from my NexusHD2 using XDA App
qdochemistry said:
I ordered a sgs2 yesterday since it was free .. don't have the phone yet but I actually was looking at this along w a tpu case. I like the holster look but wanted protection for top and bottom too. I was wondering if anyone knows if a tpu case can fit it in.
Sent from my NexusHD2 using XDA App
Click to expand...
Click to collapse
yes, i had this
http://www.ebay.com/itm/SOFT-GEL-TP...182019?pt=PDA_Accessories&hash=item589236b983 from another seller on ebay
and this (broke the belt clip off by accident)
http://www.ebay.com/itm/Case-Samsun...583185?pt=PDA_Accessories&hash=item53eb563d91
the slightly different version of this holster....there is little bit of extra space though..very very slight...it wont fall out by might move slightly...works well if you dont mind the extra space
Thanks .. I was thinking of the exact same tpu but in clear/white but I guess the black you got looks better with the holster. Can't wait for the phone to come home and okay with it ;-)
jdiddy_ub said:
yes, i had this
http://www.ebay.com/itm/SOFT-GEL-TP...182019?pt=PDA_Accessories&hash=item589236b983 from another seller on ebay
and this (broke the belt clip off by accident)
http://www.ebay.com/itm/Case-Samsun...583185?pt=PDA_Accessories&hash=item53eb563d91
the slightly different version of this holster....there is little bit of extra space though..very very slight...it wont fall out by might move slightly...works well if you dont mind the extra space
Click to expand...
Click to collapse
Sent from my NexusHD2 using XDA App
Btw .. you mind giving some input on the quality of that belt clip and is it good enough for day to day use? I actually like the seidiko combo better but since I paid 6 bucks (shipping) for tis phone after instant rebate and waived upgrade fee .. it doesn't seem justified to spend $45 for a case to go on a $6 phone ... but if the clip is too weak I might just give in and invest in something more sturdy.
Thanks for the info!
jdiddy_ub said:
ive had 2 of them...although the case itself is nice and i really liked the belt clip and overall design..they are only like $12 on ebay, you get what you pay for...the belt clip broke off on both of them and i wasnt even doing anything...just a small nudge and the cheap plastic that holds it broke...i have given up on this case/belt combo...now im back to the old tpu case i bought and it works a lot better, i dont have to worry about breaking it
Click to expand...
Click to collapse
Sent from my NexusHD2 using XDA App
jdiddy_ub said:
and this (broke the belt clip off by accident)
http://www.ebay.com/itm/Case-Samsun...583185?pt=PDA_Accessories&hash=item53eb563d91
the slightly different version of this holster....there is little bit of extra space though..very very slight...it wont fall out by might move slightly...works well if you dont mind the extra space
Click to expand...
Click to collapse
That's the knockoff the op was warning about, isn't it?
yes, its the knockoff...i bought it first a long time ago...broke the belt clip off of it...then saw the other one..bought it, and just recently broke the belt clip off of that one as well
the knockoff is just as good except for 1 thing..the phone doesnt fit with the screen facing outwards...so you cant use it as a kickstand to watch videos...if your looking for a case/holster it does the job just the same
my conclusion after buying both (and breaking both) is that the case/holster is nice but delicate...both times i broke it i was barely doing anything..i just tapped it and the cheap plastic tab that holds the belt clip broke off
i ended up spending like $28 total for both...and im back to my old TPU case and leather pouch...i dont have to worry about breaking the pouch..ive had it for like 2 years already..used it with my vibrant and it also fits the SG2..im sure the seidio combo is a lot more durable
also, if you got the SG2 for free thats great..however that doesnt change the value of the phone..its still a $600 phone, if you really want to protect it you gotta spend the $$...consider yourself lucky to be able to get the SG2 and a great case for only $51
jdiddy_ub said:
also, if you got the SG2 for free thats great..however that doesnt change the value of the phone..its still a $600 phone, if you really want to protect it you gotta spend the $$...consider yourself lucky to be able to get the SG2 and a great case for only $51
Click to expand...
Click to collapse
Yeah I agree .. i actually like that seidio case too and it looks sturdy enough. I guess seidio it is
1 huge problem I experienced: The phone is not clipped into the holster and will pop out with when the moons line up. I wear mine horizontally and the moons lined up the other day and it hit the ground ... and when the sleeve hit the ground, the phone popped out too.
Other than that, everything else was cool but since this a biggie for me, I'm on the prowl for another case.
nooooooo!!!! i wish i saw this thread sooner. already ordered the ebay one...