Develop Bugs

[Q] Flashed Myn's Warm 2.2 (RLS 5), 4G radio not working

I flashed the ROM a few nights ago and followed the instructions regarding flashing the new Radio pack but after noticing that 4G just wouldn't turn on I tried going back into recovery and flashing the .zip again. Still didn't work.
Eventually I restored the previous backup because of an unrelated data-loss incident. I restored the backup I made of Warm and tried re-flashing the radio .zip but it still wont work, anyone care to point out what I'm doing wrong?
I've tried searching the ROM's thread but "4g" must not be long enough to search for, and "radio" yielded no help either. I would've posted this there but evidently I need 10 posts before I can post to the Dev forum(A new rule?).
Thanks for reading!

What's your phone information(build,kernel,hboot)?

I thought that stuff was controlled by the ROM developer. It's on HTC kernel 15, build is warm 2.2 RLS 5.
Sent from my PC36100 using XDA App

As it turns out, last night I was able to turn 4g on, but I'm no longer able to do it now. Anyone know what's up?
Sent from my PC36100 using XDA App

I had the exact same problem as you. This just happened out of nowhere which is even more weird. The rom was working fine and then all of a sudden it just stopped allowing me to turn on 4g. I get the scanning then disconnect really quick. Or I get turning on and turning off over and over again. It shows really quick.
What I did was I flashed back to stock with an old nandroid. I went to a area without 4g and tried to let it connect. Of course it couldn't. I then updated my profile 4 times. I flashed back to another rom and it is working again. Still a little buggy but way better than not being able to connect at all.

Jjday7 said:
What I did was I flashed back to stock with an old nandroid. I went to a area without 4g and tried to let it connect. Of course it couldn't. I then updated my profile 4 times. I flashed back to another rom and it is working again. Still a little buggy but way better than not being able to connect at all.
Click to expand...
Click to collapse
Did you go back to Warm? And what profiles are you talking about exactly, and what does that do? I like this fRom a lot so I'd hate to have to switch.
Sent from my PC36100 using XDA App

motherboyxxx said:
Did you go back to Warm? And what profiles are you talking about exactly, and what does that do? I like this fRom a lot so I'd hate to have to switch.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
I have been bouncing back and forth between his and mikfroyo. You go into settings and go to system updates and update profile. When it's done hit ok. Do that a few times and restart the phone. See if that works. It took me days to get mine working again. I think it was from flashing from rom to rom all the time and updating and upgrading the radio's that caused the problem. I don't think it's his rom that is causing it in my case at least. Good luck

My standard process when flashing roms and kernels has always been and will be when im done with the flashing . Setup widgets and where I want them , apps , general settings etc etc etc . Then perform Update Profile followed by Update PRL . When those processes are done I usually let the phone settle down some then do a reboot . Again let the phone settle down from the reboot . Then check your 4G connection it should work . My only advice is to stick with roms running off the newest radios . That way you cut out flashing radios causing possible issues with 4G .

So i am having issues with this ROM and was wondering if anyone is having the same issue. Well i see that my awake and run time are the same and spare parts is showing 100% usage on the CPU.
ive tried using all the different kernels to no success.
any help would be appreciated.
Myn's warm 2.2 RLS 5
updated radios
kings 11

I've installed Myn and my 4G doesn't work. It switches between on and off really fast and then sometimes it'll go further and scan, connect, disconnect, and repeat.
Specs: myn's warm TwoPointTwo (RLS5)
Baseband: 2.15.00.11.19
Kernel: 2.6.32.25-netrarchy-toastmod-4.2.1-cfs-bfq-havs-more-smartass
PRI version: 1.90_003
PRL version 60674
NOTE!! I've already checked if my RSA keys have been lost and they haven't.
Any tips would be grateful, I'm going to flash Fresh tonight and hopefully it works.

Jj, and SouthernEvo, thanks for the tips! I cracked the glass on my phone and just got a replacement, when I flashed the radios I didn't get the images the dev said I would: "While the radios are flashing you'll see a little green arrow phone icon for a bit afterwords, Wait on this. You will then automatically be taken back to recovery."
If this time around it doesn't work again I guess I'll try flashing a re-downloaded Radio package!
running_onCode, seems that we might be having the same issues, did you notice anything strange while flashing the radio package? Like I said on this second Evo, when I flashed it I paid attention and didn't get any green exclamation points.

I have this problem as well. I've used the app that checks for the RSA keys and it says I'm good. I've also checked via a console app.
What happens is exactly like everyone else here. Once the WiMax radio is turned on it'll scan for 3-5 seconds, then it says connecting to Sprint for about .5 seconds, then it says disconnect, and repeats. I've flashed and reflashed with the latest radio pack at the top here: http://forum.xda-developers.com/showthread.php?t=715485 . I did that so I could run Myn's Wyrm RLS5. H boot has not been flahed ( think I have a really old version). I've tried different ROMs and there is no difference. I tried going back to my previous ROM and it still didn't work. I tried updating Profile and PRL 5x and doing a shutdown>reboot and there was no change. Any help would be great.

I tried
Standby time: 10
Scan Rate: 30
NAI: [YourMAC]@sprintpcs.com
User Name: your sprintpcs.com account
Realm: sprintpcs.com
Center Frequency: 2647000, 2657000, 2667000
Bandwidth: 10, 10, 10
NAPDIS: 000002
NSPDIS: 000004
Wimax_Scan_Attempt_Timeouts: 1
Wimax_Scan_Retrys: 15
Wimax_Idle_Sleeps: 10
Wimax_Entry_RX(RSSI): -98
Wimax_Entry_CINR: 4
Wimax_Entry_Delays: 0
Wimax_Exit_CINR: 1
Wimax_Exit_Delays: 15
Handoff Threshold: 0
Idle Mode Timer: 0
TLS: Enable
TTLS: Disable
and theres no change

motherboyxxx said:
Jj, and SouthernEvo, thanks for the tips! I cracked the glass on my phone and just got a replacement, when I flashed the radios I didn't get the images the dev said I would: "While the radios are flashing you'll see a little green arrow phone icon for a bit afterwords, Wait on this. You will then automatically be taken back to recovery."
If this time around it doesn't work again I guess I'll try flashing a re-downloaded Radio package!
running_onCode, seems that we might be having the same issues, did you notice anything strange while flashing the radio package? Like I said on this second Evo, when I flashed it I paid attention and didn't get any green exclamation points.
Click to expand...
Click to collapse
Yeah, it seems like we do have the same issue. I'll flash Myn's rom when there is a fix for the 4G or maybe it's just our phones? I got tired of waiting so I flashed MikFroyo and everything is working. I was using 4G a couple minutes after leaving my house yesterday.

Yeah I'm thinking of just flashing another ROM, can't get much help without posting to the ROM thread itself and I guess I can't do that anymore!
It's too bad though, the first time around I had amazing battery life, but this time it's a lot worse

Are you using Titanium Backup? I had the same problem when I used TB, I would wipe everything, flash Myn's rom and them restore all my apps using TB and 4g would not turn on at all, RSA keys were intact but no 4g. I actually did a Nand backup before running TB and after using TB and trying to restore Nand 4g still would not work!
It actually took a while before I figured out it was TB borking the 4g (3-4 installs and reboots). I had to write down all my backed up apps and download them one by one
Hope this helps!

Jfree3000 said:
Are you using Titanium Backup? I had the same problem when I used TB, I would wipe everything, flash Myn's rom and them restore all my apps using TB and 4g would not turn on at all, RSA keys were intact but no 4g. I actually did a Nand backup before running TB and after using TB and trying to restore Nand 4g still would not work!
It actually took a while before I figured out it was TB borking the 4g (3-4 installs and reboots). I had to write down all my backed up apps and download them one by one
Hope this helps!
Click to expand...
Click to collapse
Can anyone confirm this? I'd love to go back to Myn's Rom.
Sent from my Supersonic MikFroyo using Tapatalk.

Jfree3000 said:
Are you using Titanium Backup? I had the same problem when I used TB, I would wipe everything, flash Myn's rom and them restore all my apps using TB and 4g would not turn on at all, RSA keys were intact but no 4g. I actually did a Nand backup before running TB and after using TB and trying to restore Nand 4g still would not work!
It actually took a while before I figured out it was TB borking the 4g (3-4 installs and reboots). I had to write down all my backed up apps and download them one by one
Hope this helps!
Click to expand...
Click to collapse
As a matter of fact I am using Titanium! So I should flash the rom and install the apps one by one or what? That's not really something I'm looking forward to

motherboyxxx said:
As a matter of fact I am using Titanium! So I should flash the rom and install the apps one by one or what? That's not really something I'm looking forward to
Click to expand...
Click to collapse
I doubt it is titanium, I had the same problems with RLS 5 not getting 4g. Have used titanium on Calks, Mik, and Azrael without having 4g scanning / disconnecting issues. There was a fix for this a couple weeks ago, somewhere. Too much for me so I moved on. Ricsim said that battery life is 97% driven by the kernel, not the Rom.

Bump! Anyone?

Cannot connect to 3g

Hey whats up guys...im really not sure what the problem is but maybe some one has experienced with before..
My droid incredible cannot connect to 3g service...i tried installing all different kinds of roms even the latest gingerbread releases but still nothing.
Some times i allows me to connect to 1x but then you see the "3g" on the top but then it instantly disconnects.
Ive so tried 3 different radio from the NIS business sense release...all failed..
Any ideas?!?!?
Or if i just need the stock radio??

Aloha! I'll see if I can help.
1) Do a nandroid backup in recovery.
2) Wipe data/cache/dalvik cache then flash rmk40's gingersense leak: http://forum.xda-developers.com/showthread.php?t=1087077
3) Reboot and skip set up. Turn on 3G and even test it out for a bit. You should have whatever signal you are used to having return.
4) reboot into recovery and wipe cache, then go into advanced and wipe dalvik cache
5) Restore your latest Nandroid backup
Let me know how this works.

SlimSnoopOS said:
Aloha! I'll see if I can help.
1) Do a nandroid backup in recovery.
2) Wipe data/cache/dalvik cache then flash rmk40's gingersense leak: http://forum.xda-developers.com/showthread.php?t=1087077
3) Reboot and skip set up. Turn on 3G and even test it out for a bit. You should have whatever signal you are used to having return.
4) reboot into recovery and wipe cache, then go into advanced and wipe dalvik cache
5) Restore your latest Nandroid backup
Let me know how this works.
Click to expand...
Click to collapse
How would this fix any 3g issues by flashing a new rom and then returning to you old Rom with a backup? I seem to have an issue changing from 1X to 3g causing me to restart my phone at times to pick up the 3g signal again.

Primarily, the people who noticed this issue were/are folks who try out the various gingersense roms available. I've been a member of XDA since January and haven't noticed users in large numbers have issues with 3G until these roms came out. Whether it's due to there not being an official base or what, idk but many users have had these issues with 3G since the May unofficial gingersense leaks:
1) 3G being present and fully functional then disappearing from the notification bar altogether even while still being enabled in Settings
2) 3G signal dropping down to 1x and not displaying again until you perform a reboot.
I have experienced this issue and know this resolved it. This rom as well as Incubus26jc or JoelZ's stock OTA gingersense leak, for whatever reason, are a solution to resolve the 3g drop issue not the only solution. Incubus26jc, JoelZ, and Nils each have recommended and note this is a fix. My (non-fact and own) answer to you would be I believe since these three roms are the unaltered and "(un)official gingerbread Sense" files, they recorrect the 3G signal that is going awry.
Try it and let me know how this works. You don't stand to lose anything except a few minutes haha

This solution fixed my problem.

Dang it actually worked. Wish i had done this a while back. Thanks for the simple fix.

Not a problem, I'm just thankful there's a fix.

Accidentally worked for me too
I had the same problem on CM7. Flashing back to my stock 2.2 Android backup fixed the problem. Flashing back to CM7 and OMGB caused the problem to return. I am on the leaked ota now, I have flashed the gingerbread radio, and I am having no 3g issues. I wish that I had found this thread earlier.

Had this exact issue with synergy rls1 and was also told to flash the rom above to fix it. It worked for awile but then 3g issues would return again, even on non sense 3 roms and even on my old virtuous nandroid. If just flashing the above rom works for you and permanetly fixes it thats cool, but if your like me the only fix is to revert back to compleet stock and i mean compleet stock rom radio recovery boot img everything the only thing not stock would be you still want to have s-off as a matter of fact make sure to check you are s-off before going stock. Once stock you need to do a factory reset from the settings menu. What this does is it compleetley wipes your phone back to stock including wiping vzw programing, wich is the key to fixing 3g. Once your phone reboots from the factory reset you will be prompted to dial *228 option 1 to reprogram your phone. Once reprogramed your 3g will be fixed. From there flash clock work or amon ra recovery and then restore your favorite nandroid or install a new rom. I personaly would stay away from sense 3 roms as after fixing mine with the above steps i not thinking installed another sense 3 rom and broke 3g again making me fix it all over again. I have stayed away from sense 3 and havent had any problems since. Note if you have a compleete stock nandroid you can just flash that then flash stock recovery and radio do the factory reset .....
Sent from my ADR6300 using XDA Premium App

Well this is why Android is all about choice.

Well, I tried to install rmk's rom and that didn't work. I also tried to go back to stock with the RUU and the PB31IMG.zip file to do a factory reset, but that didn't work either. Are there any other suggestions that I can try?

Devildog8791 said:
Well, I tried to install rmk's rom and that didn't work. I also tried to go back to stock with the RUU and the PB31IMG.zip file to do a factory reset, but that didn't work either. Are there any other suggestions that I can try?
Click to expand...
Click to collapse
If an ruu and a factory reset with new programing didn't fix your 3g issue its possibly hardware related. Can you still connect at 1x speed?

cmlusco said:
If an ruu and a factory reset with new programing didn't fix your 3g issue its possibly hardware related. Can you still connect at 1x speed?
Click to expand...
Click to collapse
No, I called Big Red and they're sending out a replacement phone. I'm one of them weird people that don't use their phone as a phone too much, but I realized that I couldn't make or receive phone calls or texts either. We got that issue fixed, but they couldn't get the data working.
I guess the world of root is gone for me since it will probably come with Gingerbread on it already. Oh well, I'm probably going to buy a new phone in December anyway, so I'll have a new Dinc to put away in the drawer.

Devildog8791 said:
No, I called Big Red and they're sending out a replacement phone. I'm one of them weird people that don't use their phone as a phone too much, but I realized that I couldn't make or receive phone calls or texts either. We got that issue fixed, but they couldn't get the data working.
I guess the world of root is gone for me since it will probably come with Gingerbread on it already. Oh well, I'm probably going to buy a new phone in December anyway, so I'll have a new Dinc to put away in the drawer.
Click to expand...
Click to collapse
Root may still be possible, check out this thread http://forum.xda-developers.com/showthread.php?t=1306400. Mabey you will get lucky and they will be out of incredibles and they will send you an incredible 2. Ive heard it happens .

cmlusco said:
Maybe you will get lucky and they will be out of incredibles and they will send you an incredible 2. Ive heard it happens .
Click to expand...
Click to collapse
Looks like they are sending me a Rezound...JK. Actually, it looks like they are sending me an OG Incredible. I'll know more tomorrow and will let you know.
Thanks for the link to the root method. I have been studying it and I have all the files downloaded just waiting.
Edit: I did get an OG Incredible, but it came with Froyo on it. I should be good to go as far as rooting it goes. I think that I have an SLCD model though which sucks.

[Q] ota update messed up phone

Ok the other day I did a *228 update and ever since then my 3g won't connect. It barely will stay connected with 1x. I had the synergy ROM at the time. I changed to nils business gingerbread since and it still didn't work. I also flashed my radio and still nothing. Any help plz

Sounds like you'll need to reflash a stock rom. This is a pretty common issue and there are a lot of threads on the subject, it's why you don't *228 on sprint based roms. Flash the stock rom, then the rom of your choice.

k_nivesout said:
Sounds like you'll need to reflash a stock rom. This is a pretty common issue and there are a lot of threads on the subject, it's why you don't *228 on sprint based roms. Flash the stock rom, then the rom of your choice.
Click to expand...
Click to collapse
I always to a *228 on my sprint based rom and never had a problem. it wont connect to sprint at all. yes is sprint based rom but to port it to work on the incredible it uses the key incredible files.

k_nivesout said:
Sounds like you'll need to reflash a stock rom. This is a pretty common issue and there are a lot of threads on the subject, it's why you don't *228 on sprint based roms. Flash the stock rom, then the rom of your choice.
Click to expand...
Click to collapse
Hes right check the synergy rls1 thread for posts by me i had the same issue and there is good info there on how to get 3g back. Also i gave up on synergy because of this problem. Even aftet going back to stock and factory resetting and fixing it as soon as you reinstall synergy and reboot a couple times 3g breaks again, even if you dont do a *228. However i will say doing a *228 is what started the issue in the first place. Something is messed up with synergys epst.
Sent from my ADR6300 using XDA Premium App

I think you can flash the Gingerbread leak and it will fix 3G issues also.

[Q] messed up 3g after switching from MIUI

ok, heres the deal. Ive played with just about every rom for this phone. Then one happy merry day, i decide to install miui (i loved it on my dinc 1) then after getting my fill of it i went back to stock (andybones stock rom i think it was). Now the 3g keeps cutting off so i have to use wifi whenever i get the chance or be stuck with 1x, and it wont send or recieve calls unless im outside. I tried flashing the latest radio, trying different roms, RUU then reroot, but its still having this issue. Anyone else having this issue? Anyone find a fix?
BTW its the miui rom from miui.us

SynysterSilence said:
ok, heres the deal. Ive played with just about every rom for this phone. Then one happy merry day, i decide to install miui (i loved it on my dinc 1) then after getting my fill of it i went back to stock (andybones stock rom i think it was). Now the 3g keeps cutting off so i have to use wifi whenever i get the chance or be stuck with 1x, and it wont send or recieve calls unless im outside. I tried flashing the latest radio, trying different roms, RUU then reroot, but its still having this issue. Anyone else having this issue? Anyone find a fix?
BTW its the miui rom from miui.us
Click to expand...
Click to collapse
Have you tried *228 option 1 then *228 option 2 from an OTA based ROM? If not I would suggest giving that a try.

CondemnedSoul said:
Have you tried *228 option 1 then *228 option 2 from an OTA based ROM? If not I would suggest giving that a try.
Click to expand...
Click to collapse
tried it didnt work tho. I even tried reinstalling the radio but it didnt help much. the way i see my best options are:
1) just call in for a replacement but ive already done that so much im sure verizon hates me xD
2) wait for the ics update to come out which i recently discovered is confermed by htc to come out soon this year
3) turbo charge the 3g i do have to get a better connection out of it and just stay on wifi when im at my house
unfortunatley i would really like to find a fix for this so if anyone wants to help out by finding a way or making one id appreciate it. Ive already googled the crap out of this but youre welcome to look around.

You could have a hardware issue, or you could be having the issue that just about everyone had on the Incredible 1 at some point.
http://forum.xda-developers.com/showthread.php?t=817487&highlight=3g+drops
Try that, but with files for our phone. Do NOT use the RUU for the Dinc1. Or, try flashing a stock based ROM like SkyraiderZeus. If none of this works, its probably a hardware issue.

[Q] Total Signal Loss, Again

My wife and i got our GNex phones at the same time in April through the Amazon wireless store. Both of our phones had to be repalced by amazon within the 30 day window for 4g/3g/1x signal drop issue. 4g radio would just totally crap out, then would wipe out the 3g and then i would have a complete signal loss. Everything was fine after we got the replacement phones. My wifes phone is totally stock and has had zero issues. Mine is rooted running AOKP toro IMM761, Android 4.04. 4 days ago it started having the rampant 4g signal crash issue again. I've turned off the 4g radio for now, but according to NoSignalAlert, with just the 3g radio on i've had complete signal loss 7 times today. I'm in the same area as usual, my house and my office where i normally have 2+ bars of 4g. I'm thinking the radio has gone bad in this phone, like it did in both of our previous GNex phones, it just took this one 6 months to die. Now i have to deal with Verizon Wireless to get a replacement. They are wanting to make sure i'm on the most current build, baseband etc. Here are my questions.
1 - What is the most current stock ROM, radio, build etc. that i an put back on my phone to both a)make sure that a rooted app/baseband etc. is not all of a sudden causing this issue and b) i can talk to VZW and they won't know i've rooted the phone.
2 - Once i return the phone to a stock ROM, i assume that I will have to do an OTA to satisfy the VZW tech. If the phone does not need to be replaced, i.e. the OTA fixes it, will i still be able to root back to an AOKP ROM?
3 - Is there some other update i should try before going the "unrooted" route and trying to talk with Verizon?
Thanks for your help.
Chris

http://forum.xda-developers.com/showthread.php?t=1890585
Here are the VZW radios for the Gnex. Personally I would try flashing the new one [4.1.1 (JRO03O)] with a JB ROM. I was on AOKP for pretty much the entire life of my Gnex, 8 months, and never tried CM10. Flashed CM and besides the Nav bar, which I like better in AOKP, I have seen substantial improvements in performance, stability, and even better battery life. If you are determined to stay with AOKP I would still update to the JB version and try those "new" radios.

I started having the same problem a couple days ago when flashing a ROM went bad so I had to restore to an old (4+ mo. old) backup. From there I flashed factoryrom jb and then flashed the new radios today Cuz I just noticed the lack of signal. Still no bars anywhere. Any other thoughts? Do you think flashing a CM would fix it? If so, why?

Elvis_Marmaduke said:
I started having the same problem a couple days ago when flashing a ROM went bad so I had to restore to an old (4+ mo. old) backup. From there I flashed factoryrom jb and then flashed the new radios today Cuz I just noticed the lack of signal. Still no bars anywhere. Any other thoughts? Do you think flashing a CM would fix it? If so, why?
Click to expand...
Click to collapse
What is selected in settings-more-mobile network-network mode?

data enabled is checked, and network mode is LTE/CDMA
I was gonna try to find a fix today and if i can't find one, flash to complete stock, reroot/mod etc.

Elvis_Marmaduke said:
data enabled is checked, and network mode is LTE/CDMA
I was gonna try to find a fix today and if i can't find one, flash to complete stock, reroot/mod etc.
Click to expand...
Click to collapse
Well, your settings are good to go. Did you check the md5 sum of the radio file after you downloaded it? If you have root explorer hold down on the .zip file and choose properties to check the sum and make sure it matches.

hahaha i guess that's what I get for trying to download a radio on crappy mall WiFi... the MD5 was bad :-/ works good now! thanks!
---------- Post added at 11:42 PM ---------- Previous post was at 11:05 PM ----------
Hmm, it did this "need to restart SIM to work properly" crap, restarted and stopped working. Any thoughts? I'm installing franco kernel to see if that helps

Welp I ended up just flashing the factory image hahaha, will reinstall ROM and see how it goes. Everything seems to be working fine right now though

Glad it was something simple like that to get you back up and running.:good::highfive:

WiredPirate said:
http://forum.xda-developers.com/showthread.php?t=1890585
Here are the VZW radios for the Gnex. Personally I would try flashing the new one [4.1.1 (JRO03O)] with a JB ROM. I was on AOKP for pretty much the entire life of my Gnex, 8 months, and never tried CM10. Flashed CM and besides the Nav bar, which I like better in AOKP, I have seen substantial improvements in performance, stability, and even better battery life. If you are determined to stay with AOKP I would still update to the JB version and try those "new" radios.
Click to expand...
Click to collapse
I d/l the 4.1.1 radio and flashed it in clockwork, and though the flash said it completed successfully, i don't see a way to check the radio version. I don't see 4.1.1 JR03O listed anywhere in the About Phone information...Where should i be looking?
Further, my prboblem seems to have further degaded ...With the 4g radio on, i get random total shut down of the phone, as opposed to simple radio crashes. Just goes to off with black screen. I'm up to try anything. I assume i can easily locate one of these JB ROM's in the dev section?

TurbineTester said:
I d/l the 4.1.1 radio and flashed it in clockwork, and though the flash said it completed successfully, i don't see a way to check the radio version. I don't see 4.1.1 JR03O listed anywhere in the About Phone information...Where should i be looking?
Further, my prboblem seems to have further degaded ...With the 4g radio on, i get random total shut down of the phone, as opposed to simple radio crashes. Just goes to off with black screen. I'm up to try anything. I assume i can easily locate one of these JB ROM's in the dev section?
Click to expand...
Click to collapse
The baseband i think. Mine is I515.09 V.FF02 / I515.FG02.
I'm not all that knowledgable about the radios I just know my reception/data was poor on JB ROM with ICS radios. When I flashed the JB radio, my issues were fixed. I believe the ROM and radio versions should match, so if you flash JB radio I would flash JB ROM. All the info should be in the thread that is linked.

WiredPirate said:
The baseband i think. Mine is I515.09 V.FF02 / I515.FG02.
I'm not all that knowledgable about the radios I just know my reception/data was poor on JB ROM with ICS radios. When I flashed the JB radio, my issues were fixed. I believe the ROM and radio versions should match, so if you flash JB radio I would flash JB ROM. All the info should be in the thread that is linked.
Click to expand...
Click to collapse
I am such an idiot, this whole time you've been talking about JB ROMs i assumed you meant some particular brand of ROM, like AOKP or Myn etc... It didn't dawn on me until i saw JB next to ICS that you meant Jelly Bean ROM.
Ok i'm running an AOKP Jelly Bean ROM with Android 4.1.2
baseband is the same as yours
Build is aokp_toro-userdebug 4.1.2 JZo54K
The radio problem seems to be resolved. Thanks for the point in the right direction!

oops, accidentally wiped my sd card when i was restoring back to factory... TOTAL back to factory hahaha.... which isn't so bad i guess... after a year it's about time I guess
I seem to lose signal when leaving wifi though, have to either airplane mode or reboot. Because I had my phone so long, I don't know if there was connection or dust issues, so I did the classic NES/SNES/Sega Gen trick, took the sim card out, blew in there and all that. Seems to still be going ok.

Fyi.. i a simple restart doesnt disconnect u from the towers.. u need to turn off, pull battery, pull sim, and wait for 10 20 sec. That will disconnect u fully..
Sent from my Galaxy Nexus using Tapatalk 2