Has anyone been able to pair their XOOM with a palm foldable keyboard?
I don't know the exact model number of the one I have but I can't get it working with the XOOM.
I paired it with my WIN7 laptop and it worked fine, but when I try to pair it with the XOOM it sticks on "connecting" in the XOOM's bluetooth settings, but never actually gets through.
I have the keyboard in discoverable mode, the XOOM sees it as an available device and recognizes it as a keyboard, but when I tap to pair it gets grayed out, sits for maybe 30 seconds then just goes back to visible again.
I'm guessing its a driver issue, but hoping someone can point me in the right direction to try and get this thing to pair correctly.
Thanks.
Related
I have a 2005 Acura with bluetooth phone. My girlfriend and I both have pairing to it, she has an old Sprint A920, I have a Tmobile TP2. If we get into the car around the same time, her phone always wins! Of course the ideal solution would be if the car had a function to prioritize who gets bluetooth (if it connects hers, then sees mine, to disconnect hers and connect mine), but alas, nothing like that. I assume the car is polling for a bluetooth and picks the first one it finds. It doesn't seem related to who it paired last, or who made a call last, and we tried unpairing both then pairing mine first or hers first.
So, other than her turning off bluetooth (a pain on her phone) whenever we get back to the car, is there any solution to get it to like me more? Is the problem in the speed the TP2 connects? Any way to speed that up with the stock ROM.
And while I'm here anyway, many thanks to all the amazing people in the XDA community.
greatbrit said:
I have a 2005 Acura with bluetooth phone. My girlfriend and I both have pairing to it, she has an old Sprint A920, I have a Tmobile TP2. If we get into the car around the same time, her phone always wins! Of course the ideal solution would be if the car had a function to prioritize who gets bluetooth (if it connects hers, then sees mine, to disconnect hers and connect mine), but alas, nothing like that. I assume the car is polling for a bluetooth and picks the first one it finds. It doesn't seem related to who it paired last, or who made a call last, and we tried unpairing both then pairing mine first or hers first.
So, other than her turning off bluetooth (a pain on her phone) whenever we get back to the car, is there any solution to get it to like me more? Is the problem in the speed the TP2 connects? Any way to speed that up with the stock ROM.
And while I'm here anyway, many thanks to all the amazing people in the XDA community.
Click to expand...
Click to collapse
I've found that my Windows Mobile devices are slower to pair with Bluetooth headsets/car kits than the older dumbphones I've had (mostly Motorolas).
A partial solution to the problem with the Acura HandsFreeLink, if it pairs to her phone first, is to press the HFL button on the steering wheel and say "Next Phone". It will unlink her phone and link to your phone. That way you can keep both phones paired to the car if needed and still use your phone if the car happens to link with hers first.
dwboston said:
I've found that my Windows Mobile devices are slower to pair with Bluetooth headsets/car kits than the older dumbphones I've had (mostly Motorolas).
A partial solution to the problem with the Acura HandsFreeLink, if it pairs to her phone first, is to press the HFL button on the steering wheel and say "Next Phone". It will unlink her phone and link to your phone. That way you can keep both phones paired to the car if needed and still use your phone if the car happens to link with hers first.
Click to expand...
Click to collapse
Awesome solution, TYVM! Funny, I think I remember help telling me that command but never thought that was what it did Now I just have to find a way to say 'next phone' without my g/f hearing me
I have my Droid Incredible and my Mac computer paired but I have no idea how to connect them. Anyone know how to?
i need to know also...
is the mac in your list? you should just be able to click on it and it'll connect.
Im having this issue with a motorola car system
it will pair, but will not connect...
May be related to your issue ?
I hope someone can offer some suggestions
byproxy said:
is the mac in your list? you should just be able to click on it and it'll connect.
Click to expand...
Click to collapse
My computer is on the list but whenever i click on it, the only option is to unpair.
Try deleting and re-establishing a connection. I had to do this with my car system the second time I used it. It seems to work fine after that..
I'm having a somewhat related issue....
I can pair my BT headset, but each time I turn it off and back on I have to manually "Connect" it. It stays in my Devices list, but it will not automatically connect when it sees the headset. Instead I have to touch-hold the device and choose "Connect".
That's a pretty annoying extra step. With my Droid, all I had to do was turn on the headset and then the Droid would see it and connect automatically.
photonmedia said:
I'm having a somewhat related issue....
I can pair my BT headset, but each time I turn it off and back on I have to manually "Connect" it. It stays in my Devices list, but it will not automatically connect when it sees the headset. Instead I have to touch-hold the device and choose "Connect".
That's a pretty annoying extra step. With my Droid, all I had to do was turn on the headset and then the Droid would see it and connect automatically.
Click to expand...
Click to collapse
I am having this same problem. Anyone find a solution to this?
I had the same problem while importing contacts from my Touch Pro. I somehow managed to import though.
Strange but true,,,,,
All of my previous WM units, and I had most of them, had BT troubles, but the incredible has been the first device to work correctly with all of my toys. I have a Moto HT-820 stereo HS, a BT mirror in 1 car, Scala Rider BT on my bike, Kenwood system in my other car, and all work, I even made the thing transfer my contacts list from my TP 2 ;-)
Same issue here with my Atrix to my G-Tablet.
I have been all over the Google and nothing but unresolved threads out there.
I have only gotten BT pairing issues with gingerbread roms, not froyo. Are these other folk having bt issues on gb, and perhaps not froyo?
Sent from my ADR6300 using XDA Premium App
i have a stereo blutooth headset i have had it for little over a year and have used it with a couple older phones(non android) and i would always be about to just turn on headset and it would connect, when i got the dinc and tried to use my headset it would sometimes only connect to the music part or the phone part or sometimes not at all.
i found that if i turn my headset on first, then turn on the blutooth on the dinc it will connect right up no problems at all, this is completely backwards from way i have always done it but it works so i just use wiget to turn off bt if it is on on the phone, then turn on headset then turn widget back on and bingo! not sure if this will work with car or computers but as far as headset it seems to be the way to go!
hope this helps.
Yeah, wow problem ...
Well, still, this unit - a miracle!
very very much!
Azag Thoth said:
i found that if i turn my headset on first, then turn on the blutooth on the dinc it will connect right up no problems at all, this is completely backwards from way i have always done it but it works so i just use wiget to turn off bt if it is on on the phone, then turn on headset then turn widget back on and bingo! not sure if this will work with car or computers but as far as headset it seems to be the way to go!
hope this helps.
Click to expand...
Click to collapse
I'll try this right away!
I have used my SGS3 for a while now with the built-in bluetooth phone connection in my car. The first time I used it I had to go through the pairing process, ever since then it automatically connects as soon as I turn on the car. I don't have to touch anything, as long as I have bluetooth turned on it connects.
So, I added a Logitech bluetooth audio receiver to the car http://www.amazon.com/Logitech-Wireless-Speaker-Bluetooth-980-000540/dp/B004VM1T5S
This unit paired with the phone fine, and remembers the pairing. Only problem is every time I turn it on, I have to go to the bluetooth menu on the phone and tap the entry for the logitech adapter to get it to connect. It's a few more steps that I'd like to make this work.
Can anyone suggest a way to my phone to auto connect this pairing?
I know it's uncool to bump your own post, but really........nobody?
Really unsure but try deleting the device from your phone reboot and pair again. All I can think of.
Transmitted with a portable device using Xparent Blue Tapatalk 2
I have the same problem and I have not been able to solve the problem. I am using a Blackberry Bluetooth Stereo Gateway. It would auto connect just fin to my Evo 4G. It will not auto connect on the SIII. If I look at the Bluetooth settings I will see it briefly show Connecting before dropping off when I power up the gateway. It has been this way since I got the SIII. I have only tried the stock ROMs. I am thinking about trying an AOSP ROM to see if it makes a difference.
Hello, I am getting weird problem when using bluetooth devices with my HTC 10 (stock rom)
I bought a bluetooth device with aux-in for my car radio.. That way I only enable BT on my phone and devices connect without problems.
But I also have a small Bluetooth speaker I use when I renovate the apartment (JBL GO).
The problem is when I paired car bluetooth device so it can connect automatically and after that also connected bluetooth speaker this one does not want to connect. If I unpair car bluetooth device, the speaker connect normally.. also if speaker connect and I come down to my car and try to pair to car bluetooth device, it doesnt want to connect/pair... Again if I remove BT speaker from paired devices, car bluetooth device connect normally...
Why is that, anyone knows a solution? Why can I have only one BT device paired with my phone?
Thank you for answers
i have this problem too.
Had this problem myself.
Updated to the latest firmware, rom and kernel.
Currently using cleanslate.
Turn on the BT device, make sure no other BT devices are in the near radius which may confuse it, no wireless devices (I know hard in this day and age)
Turn on BT on your phone, hold it up clearly (not laying down) close all apps, and open the Bluetooth menu.
Click the Bluetooth device to make sure it's ready to pair. Then scan on the phone.
Should start picking it up.
Repeating this and turning the BT device on and off periodically, allowing for several attempts at a time before switching off..
Even really it'll work, perhaps a different rom or kernel combination may help..
I have had this problem, once connected it'll always work and work well. It's odd
Same issue somewhat..I really want to keep this device...i dooooont want to go back to the s7. But on the S7, i could have my Gear S2, Sync and LG Tone all paired at the same time...If i got a call they would all ring and i could answer on whatever device...now if i have the LG on, sync wont find the device. or the phone wont allow for sync to use the Phone, because the S2 is using that feature...what gives? just me?
CrazyCypher said:
Hello, I am getting weird problem when using bluetooth devices with my HTC 10 (stock rom)
I bought a bluetooth device with aux-in for my car radio.. That way I only enable BT on my phone and devices connect without problems.
But I also have a small Bluetooth speaker I use when I renovate the apartment (JBL GO).
The problem is when I paired car bluetooth device so it can connect automatically and after that also connected bluetooth speaker this one does not want to connect. If I unpair car bluetooth device, the speaker connect normally.. also if speaker connect and I come down to my car and try to pair to car bluetooth device, it doesnt want to connect/pair... Again if I remove BT speaker from paired devices, car bluetooth device connect normally...
Why is that, anyone knows a solution? Why can I have only one BT device paired with my phone?
Thank you for answers
Click to expand...
Click to collapse
Do you have another device to try it with? i have had a similar problem, but its just my terrible bluetooth rockford deck causing me grief, and an ebay pill. But it did it with a lg g3 and xperia phone as well. so i chalked it to that
Seems like HTC only allows one bluetooth profile at a time. Like it will only allow one device to use the phone profile or one device use the media profile.
I have to turn off my tone for Sync to connect. Sucks.
I've had this problem since purchasing the HTC 10 about a month ago. My Bluetooth earphones work without issue, but I've been unable to connect to my car or portable speakers (pairs but never connects).
After reading this thread, I unpaired the earphones, cleared all devices, and I was finally able to connect to my portable speaker. So glad I found this topic.
Still, I'm hoping for a fix. I don't want to bother with pairing and unpairing just to connect to a different Bluetooth device.
Similar problem
Hello !
I am having a similar issue!
I have been trying to register and pair my phone with my car's Bluetooth.
Every time I try to pair with my car an error message pops up saying "couldn't pair with Hands Free System because of an incorrect PIN or passkey" except it never even prompted me to enter the passkey...
Things I have already tried:
Resetting network settings
rebooting phone
Factory reset phone
Also , I do not have any other devices paired with my phone.
Any suggestions??
AmandaLS1991 said:
Hello !
I am having a similar issue!
I have been trying to register and pair my phone with my car's Bluetooth.
Every time I try to pair with my car an error message pops up saying "couldn't pair with Hands Free System because of an incorrect PIN or passkey" except it never even prompted me to enter the passkey...
Things I have already tried:
Resetting network settings
rebooting phone
Factory reset phone
Also , I do not have any other devices paired with my phone.
Any suggestions??
Click to expand...
Click to collapse
Had exactly the same problem htc10 would not pair with car bt. changed my passkey on car to 0000 still a valid code and phone paired straight away It was driving me insane trying to make it work. Worth a punt if you can change passkey
hamish707 said:
Had exactly the same problem htc10 would not pair with car bt. changed my passkey on car to 0000 still a valid code and phone paired straight away It was driving me insane trying to make it work. Worth a punt if you can change passkey
Click to expand...
Click to collapse
Thank you, I will give that a shot!
Firstly, an enormous thank you to all the amazing Devs that are still building ROMS for this old (but great!) tablet! Your work and expertise are greatly appreciated!
I've acquired a Nexus 7 2013 Flo 16gb. I wanted to tether WiFi from my Samsung S9 phone via Hotspot and use this tablet for Sat Nav and music etc in my car, a 2011 Ford Grand C-Max. It isn't permanently mounted, just with magnets on the dashboard so I can use it for other things when I'm not driving.
Using the N7's Bluetooth, I can see "Ford Audio" and get a PIN to use displayed on the cars LCD screen when I tap "connect". Everything works fine until I leave the car and take the tablet with me...
The next time I get in the car, the tablet will still see Ford Audio, and the car still lists the N7 as remembered device, but it absolutely will not connect to it again.
If I try to connect using the car's aux button, it'll say "Activating BT Device" for around 30 seconds and then shows "Activation Failed".
If I tap connect on the N7, sometimes it says "connected for a split second and then disappears again as if I never tried to connect.
The only way to get them connected again is to fully debond the N7 from the car, then reconnect from the tablet by entering a PIN number again.
My Samsung Galaxy S9 phone, (and my old Samsung Note 3 phone) doesn't have this problem. I pair the phone once with a PIN, play music with no problems, leave the car, come back, press the Aux button and it immediately picks up Spotify from where I left off. It also displays the name of the song being played and the amount of time the track has been playing, this doesn't happen at all with the Nexus tablet.
I've tried removing all Bluetooth devices from the car, changing the display name of the N7 tablet, 3 new ROMS (Lineage 19, Resurrection Remix Q and RR Pie.) It did this on Stock so thought using a more modern custom ROM would fix this strange problem but 3 ROMs later it's still happening.
I've Googled, and read on XDA, seems a lot of people had Bluetooth problems with this tablet back in the day, but that was on Android 4.4.2... But I'm still feeling this on Androids 6, 9, 10 and 12 so far, was there really never a fix found for Bluetooth problems on this device?
Does anyone have any ideas of what may be going wrong? Or any trouble shooting steps to advise? It's too much fuss to remove and re-pair the tablet every time I leave the car so any help would be appreciated please!
I can now add LineageOS 14.1 (Android7) with the ElementalX kernal to the list.
It does the exact same thing as the other Roms, pairs and connects perfectly the 1st time... After that it stays paired but doesn't connect.
If music/Spotify is already playing on the N7 and I click to connect to Ford Audio in the bluetooth settings, the music will be played on the car speakers for around 2 seconds and then stop, and then start again for another second... And then be gone forever! So bizarre.
The only way around this I can see is to buy an Aux > Bluetooth adapter from Amazon, pair the N7 to it and use the Aux channel for Audio out from the tablet over bluetooth. But I'd lose the ability to skip tracks with the steering wheel controls.
Until recently I had a N7 (2013) as my nav tablet in my vehicle. It was running Lineage.
I didn't have it paired to my stereo system, but it was paired to my steering wheel controls.
I didn't take it in or out, so that simplified things. It had a battery-ectomy and ran on a 4V regulator.
I ended up replacing it with a Walmart Onn 8" $70 tablet.
The Bluetooth spec is 3700 pages so it's doubtful that anyone has ever implemented it correctly.