Related
Alright.. This is a new one for me.
I have read almost all the threads on the incredible vibrating 3 and 5 times while booting on XDA and incredibleforum and tho the problems are similar they are not the same so I am unable to find a fix.
I have rooted the incredible , both the amoled and the SLCD version half a dozen times each and am pretty familiar with all aspects of it.
The setup...
Stock Dinc SLCD running latest OTA. totally 100% stock. This is my wifes phone, and she wanted me to root it.
I used Unrevoked 3.3.
The unrevoked process went perfectly. I plugged in the phone, hit "start" , unrevoked did its thing. It rebooted the phone, did what it does.. said "waiting for reboot", it rebooted fine. It said "this has been a triumph!" and then it said it was uninstalling unrevoked processes, then it rebooted the phone again. It did its hboot thing one more time, screen said "doing preboot sequence" it sat for a sec and then said "done!". The incredible vibrated 3 times and the screen was black.
I thought that was odd, I disconnected the USB cable and rebooted the phone (had to battery pull). when i pushed the power button it vibrated 3 times and nothing happened.
I pulled the battery again, held volume up and power , it vibrated 5 times and had a black screen. Battery pull, held optical button and power, vibrated 3 times and black screen.
This is where I sit.
I did nothing more than run unrevoked 3.3.. that is totally it.
when i "boot" the phone and get the 3 or 5 vibrations, and then plug the phone into the PC, the device manager says "qualcomm CDMA device" under unrecognized devices.
I have read that this is some sort of diagnostic mode, but I dont know anything about that.
Let the troubleshooting begin
msticlaru said:
Alright.. This is a new one for me.
I have read almost all the threads on the incredible vibrating 3 and 5 times while booting on XDA and incredibleforum and tho the problems are similar they are not the same so I am unable to find a fix.
I have rooted the incredible , both the amoled and the SLCD version half a dozen times each and am pretty familiar with all aspects of it.
The setup...
Stock Dinc SLCD running latest OTA. totally 100% stock. This is my wifes phone, and she wanted me to root it.
I used Unrevoked 3.3.
The unrevoked process went perfectly. I plugged in the phone, hit "start" , unrevoked did its thing. It rebooted the phone, did what it does.. said "waiting for reboot", it rebooted fine. It said "this has been a triumph!" and then it said it was uninstalling unrevoked processes, then it rebooted the phone again. It did its hboot thing one more time, screen said "doing preboot sequence" it sat for a sec and then said "done!". The incredible vibrated 3 times and the screen was black.
I thought that was odd, I disconnected the USB cable and rebooted the phone (had to battery pull). when i pushed the power button it vibrated 3 times and nothing happened.
I pulled the battery again, held volume up and power , it vibrated 5 times and had a black screen. Battery pull, held optical button and power, vibrated 3 times and black screen.
This is where I sit.
I did nothing more than run unrevoked 3.3.. that is totally it.
when i "boot" the phone and get the 3 or 5 vibrations, and then plug the phone into the PC, the device manager says "qualcomm CDMA device" under unrecognized devices.
I have read that this is some sort of diagnostic mode, but I dont know anything about that.
Let the troubleshooting begin
Click to expand...
Click to collapse
call for a refurb. I had it happen twice.
ACD168 said:
call for a refurb. I had it happen twice.
Click to expand...
Click to collapse
I have a refurb sitting next to me lol. I wanted to root the old one so that I could do a backup and then restore that backup on the new phone. Wife saves pictures and videos to the phones memory (i know) so i would like to recover this if possible.
Also, it seems like this is something that has to be recoverable. Some sort of software is telling it vibrate 3 or 5 times. I am still doing research on this
Well if you're trying to get into hboot you need to hold volume down and power, not volume up. Also not sure what trackpad+power does, I do know you can basically do the same thing as a battery pull by pressing volume down + power + trackpad. Have you tried booting the phone up normally too?
k_nivesout said:
Well if you're trying to get into hboot you need to hold volume down and power, not volume up. Also not sure what trackpad+power does, I do know you can basically do the same thing as a battery pull by pressing volume down + power + trackpad. Have you tried booting the phone up normally too?
Click to expand...
Click to collapse
For referance. I just 5vibed my last inc last week, i know all about it.
k_nivesout: oj + power boots fastboot
For the OP, your device is now in qualcomm diagnostic download mode. Hence qualcomm devices in device manager.
To date this is still a none recoverable issue. NO ONE has ever recovered from this.
Good news is if your still in warrenty VZW will send you out another one for free over night. Just call Tech support directly. Just tell them your phone vibed 3 times and shut off. They'll have you do some things to it over the phone. If what they have you try dosn't work, they'll send you one out over night.
Hope this helps a little and hopefully this will save you from countless hours researching. Took me three days, before I realized I had been beaten, lol.
k_nivesout said:
Well if you're trying to get into hboot you need to hold volume down and power, not volume up. Also not sure what trackpad+power does, I do know you can basically do the same thing as a battery pull by pressing volume down + power + trackpad. Have you tried booting the phone up normally too?
Click to expand...
Click to collapse
ive always used optical key plus power to boot into hboot, volume down and power works too, but ive alyays just used optical key (easier to press)
hwoever..
volume up + power - 3 vibrates
volume down + power - 5 vibrates
optical key + power - 3 vibrates
and power alone - 3 vibrates
with all of these, the screen is always black
When i plug in the phone after any of these scenarios, the PC recognizes it as Qualcomm CDMA device
msticlaru said:
ive always used optical key plus power to boot into hboot, volume down and power works too, but ive alyays just used optical key (easier to press)
hwoever..
volume up + power - 3 vibrates
volume down + power - 5 vibrates
optical key + power - 3 vibrates
and power alone - 3 vibrates
with all of these, the screen is always black
When i plug in the phone after any of these scenarios, the PC recognizes it as Qualcomm CDMA device
Click to expand...
Click to collapse
Wait, wait, wait just a minute. i wanna talk to you in private. check your pm
msticlaru said:
The 3 vibrate brick - Please Help {SOLVED}
Click to expand...
Click to collapse
Glad I could help you fix this. Don't forget to post what we did to solve this so others can learn from us
This is written for the HTC incredible, please ensure you get the proper ruu image for your particular phone. For example, the HTC wildfire will be PG76IMG.zip, not PB31IMG as I have written below. the rest of the steps are applicable to all HTC phones.
Click to expand...
Click to collapse
a BIG thanks to wildstang83 for this!
If you are getting vibrates when trying to boot your phone. do the following:
Download (see above comment)
build-3.26.605.1-release-152016-baseband-2.15.00.07.28-hboot-0.92.0000_PB31IMG.zip
google, you will find it.
backup your SD card, format it fat 32 and place this file on the root of your card. Be sure to rename it PB31IMG.zip
Once it is on your sd card, verify the MD5 to ensure the file was not corrupted during the download or during the transfer.
Hold Vol down + power. you will feel 5 vibrations
wait for a god 2 to 3 min. if everything is going correctly, your phone is verifying the IMG file and this takes a bit.
after 2 to 3 min. wait one more min
now, press vol up. this tells the phone to update.
wait 2 to 3 min for the update to happen then wait one more.
press vol up again. you should feel the phone single vibrate and then presto.. working phone again
next time be more careful
Please let me know if this did not work for you.
THANKS WILDSTANG!! You're what these forums are all about
Nicely done! I've never encountered this issue but I'm remembering this for future reference just in case.
Is that just the stock ROM? I had this problem a few months ago, unrooted through Hboot using the stock image placed onto the SD card.....it never fixed the issue though, the phone would still not recognize the SD card once booted but since I was unrooted I could at least return it.....
nate2830 said:
Is that just the stock ROM? I had this problem a few months ago, unrooted through Hboot using the stock image placed onto the SD card.....it never fixed the issue though, the phone would still not recognize the SD card once booted but since I was unrooted I could at least return it.....
Click to expand...
Click to collapse
Yes, this is the stock image method.
nate2830, your case is more typical because your phone was in full-blown Qualcomm Diagnostic Mode. Your device did this because you lost eMMC to corruption. OR you hade hardware failure.
The OP's device '3 Vibed' because when they had rooted with unrEVOked the wrong recovery for there device was installed.
A device with version 0002=Amoled must have CWM Recovery version 3.0.0.5
A device with version 0003=SLCD must have CWM Recovery version 3.0.0.8
If your device is not set-up like above, I highly suggest getting it there now.
Your device has a higher chance of "5 vibe" brick otherwise.
I am led to believe this is the case for our OP do to immediately after root (well actually during the root process if you will) they lost all screen function and the screen would not light. This meens of course: wrong recovery for the device. Also in there post above They had mentioned that Device Manager mentioned Qualcomm CDMA Device. Had there device been a total loss they would have seen Qualcomm CDMA Diag in Device Manager.
We were able to save the OP by doing what we call a 'Blind Recovery'. One must know the steps to take and how long to wait between those steps. Without being able to see the screen. Doing the dougpiston PB31IMG wipes the faulted recovery and reverts back to oem recovery which brings back phone screen function and the device it self.
End result being a device that
A) Functions properly that is now stock s-on ready to root again or whatever
B) Is now s-on with stock image and no trace of ever being rooted that now can be sent back to VZW for warranty replacement.
In any case, if you ever find yourself with a device with a screen that won't light, always try the steps above in this thread.
Things that are important to know:
1. Your devices Hardware version (Reference Above)
2. The md5 sum of ANYTHING your about to flash to your device. Test this after its on your SD Card with any md5 checker for best results.
3. If anything your about to download and flash does not have a posted md5 sum, ask the dev to please post one for verification.
4. A '5 vibe' is 'non-recoverable' and is generally 'hardware related'
5. A '3 vibe' is generally 'software related' and can be recoverable 'most' of the time. We must be careful how we proceed to take action to be succcessful.
I hope that the OP and I have saved someone from a future headache.
wildstang83 said:
Yes, this is the stock image method.
nate2830, your case is more typical because your phone was in full-blown Qualcomm Diagnostic Mode. Your device did this because you lost eMMC to corruption. OR you hade hardware failure.
The OP's device '3 Vibed' because when they had rooted with unrEVOked the wrong recovery for there device was installed.
A device with version 0002=Amoled must have CWM Recovery version 3.0.0.5
A device with version 0003=SLCD must have CWM Recovery version 3.0.0.8
If your device is not set-up like above, I highly suggest getting it there now.
Your device has a higher chance of "5 vibe" brick otherwise.
I am led to believe this is the case for our OP do to immediately after root (well actually during the root process if you will) they lost all screen function and the screen would not light. This meens of course: wrong recovery for the device. Also in there post above They had mentioned that Device Manager mentioned Qualcomm CDMA Device. Had there device been a total loss they would have seen Qualcomm CDMA Diag in Device Manager.
We were able to save the OP by doing what we call a 'Blind Recovery'. One must know the steps to take and how long to wait between those steps. Without being able to see the screen. Doing the dougpiston PB31IMG wipes the faulted recovery and reverts back to oem recovery which brings back phone screen function and the device it self.
End result being a device that
A) Functions properly that is now stock s-on ready to root again or whatever
B) Is now s-on with stock image and no trace of ever being rooted that now can be sent back to VZW for warranty replacement.
In any case, if you ever find yourself with a device with a screen that won't light, always try the steps above in this thread.
Things that are important to know:
1. Your devices Hardware version (Reference Above)
2. The md5 sum of ANYTHING your about to flash to your device. Test this after its on your SD Card with any md5 checker for best results.
3. If anything your about to download and flash does not have a posted md5 sum, ask the dev to please post one for verification.
4. A '5 vibe' is 'non-recoverable' and is generally 'hardware related'
5. A '3 vibe' is generally 'software related' and can be recoverable 'most' of the time. We must be careful how we proceed to take action to be succcessful.
I hope that the OP and I have saved someone from a future headache.
Click to expand...
Click to collapse
Oh sorry!! Thought it was a similar problem, but had a feeling it wasn't since the stock image didn't resolve my issue. Thanks!
My DINC was suffering from the 5 vibe syndrome. If I used it for anything that stressed the system or even used the phone for a few minutes it would result in a reboot that ended with a black screen, 5 vibes, and the indicator flashing green. At first I could pull the battery for a few minutes and it would recover. Eventually I ended up putting it in the freezer for a bit to get it running again. This progressively got worse until it was nearly unusable. Then I stumbled upon this thread..
http://forum.xda-developers.com/showthread.php?t=982454
Turns out mine was a hardware failure as the processor's BGA grid was failing. I heated the processor and now have a fully functional DINC. I had nothing to lose by trying this as I bought it second hand and didn't want a fancy paperweight on my desk.
Thanks guys, for helping me out with a 3-vibe brick i just had for no reason at the gym today. Was listening to music, texting, working out. All of a sudden, music stops, phone completely unresponsive. Battery out, 30-second wait, restart gives me boot-screen boot loops. Volume up + power gave me a 3 vibe brick.
Thanks to you guys, I discovered that i could get into hboot, boot into recovery from there, do a full wipe, reflash of CM7.0.3 and get the phone to start again. However, that's when the next BIG PROBLEM started. Screen went to sleep while restoring apps from the Market and now when i press the power button, the soft buttons light up but the screen doesn't. This is just super-duper to have problems like this on the same day I was telling a friend that I wouldn't trade this phone for anything else VZ has right now. Anyone have any advice?
PS - The only thing I did today besides "normal" use, is i updated Handcent and changed the LED flash rate.
msticlaru said:
a BIG thanks to wildstang83 for this!
If you are getting vibrates when trying to boot your phone. do the following:
Download
build-3.26.605.1-release-152016-baseband-2.15.00.07.28-hboot-0.92.0000_PB31IMG.zip
google, you will find it.
backup your SD card, format it fat 32 and place this file on the root of your card. Be sure to rename it PB31IMG.zip
Once it is on your sd card, verify the MD5 to ensure the file was not corrupted during the download or during the transfer.
Hold Vol down + power. you will feel 5 vibrations
wait for a god 2 to 3 min. if everything is going correctly, your phone is verifying the IMG file and this takes a bit.
after 2 to 3 min. wait one more min
now, press vol up. this tells the phone to update.
wait 2 to 3 min for the update to happen then wait one more.
press vol up again. you should feel the phone single vibrate and then presto.. working phone again
next time be more careful
Please let me know if this did not work for you.
THANKS WILDSTANG!! You're what these forums are all about
Click to expand...
Click to collapse
Sounds good, I'm hearing a RUU will work just as well?
This got my phone to turn on, but now im in a boot loop. How could i fix this? I appreciate all the help.
I actually recovered from a 5 vibrate error. I had flashed the leaked GB over a stock sense without doing a wipe and got stuck in a boot loop. Every time I tried to either power up into hboot or recovery (- vol and power, or + vol and power) I would get 5 vibrations and then a blank screen. If I tried to power up normally nothing but boot loop after the white htc screen. So I just kept trying to get hboot to load and then after about 5 tries it worked and I was able to get into recovery and flash a backup ROM. I still have problems getting hboot to load properly and it appears its a problem with how hard I press the volume keys. If I press it too hard I get five vibrations followed by the blank screen and it still takes a number of tried to get it to work right. Getting into recovery from ROM Manager is no problem it works flawlessly and I can flash ROMs with it no problem, just have problems when I manually try it. Otherwise the phone works great.
Well if you're doing volume up and power I believe that puts it into a diagnostic mode where it vibrates three times (I think) and flashes the led. Also, I'm not sure how the pressure with which you press the button would matter, I'd think it either recognizes the button press or doesn't.
k_nivesout said:
Well if you're doing volume up and power I believe that puts it into a diagnostic mode where it vibrates three times (I think) and flashes the led. Also, I'm not sure how the pressure with which you press the button would matter, I'd think it either recognizes the button press or doesn't.
Click to expand...
Click to collapse
Like I said it does it with the - volume and power combination too, + volume and power used to go straight into recovery bypassing hboot.
Its not so much the amount of pressure but the length of time I press the buttons, if I hold them too long I get the 5 vibrates, if I press them both then quickly relase them the phone will usually boot normally into hboot but not always. The button psuhing could all be coincidence and the phone just randomly works right after so many tries so I don't want to mess with the phone too much as I'm sure that eventually it will stop responding at all some day. I've never had problems flashing through ROM Manager so I will just use this and skip trying to do anything manually.
Hey guys, I'm normally silent in these forums 'cause I've never had a brick, just by reading correctly. This problem I'm having isn't a flashing brick! What happened is the following:
I know that the DHD in combi with my BT car radio is somewhat difficult (because of bad HTC coding). It seems that when I have my facebook friends in my contacts that the DHD starts slowing down and eventually hang when connected to the radio, because my radio tries to get every contact including it's info. Normally I do not sync my FB contacts with my DHD however I must have mistakingly done this.
Today I connected to my car radio and after getting out of the car my DHD showed that it was still connected (a sign that my DHD had the hang problem again). I turned of BT (took a hell of a time) and contiued on. When I came back I tried connecting the DHD again, however when I pushed the BT checkmark in settings it showed BT on, but no BT connection came up. So I went into BT settings only to find that BT wasn't turned on, then in the BT settings I checked turn BT on.
At that moment my DHD hang instantly, no inputs were registered at all. I waited a few minutes but nothing changed (I could still see the screen frozen at turning on BT). So I took out the battery and reinserted it, but when a pushed the power, the phone vibrated thrice and then did not boot, but only showed a flashing amber led.
I have rooted, S-offed and did the whole shebang to flash my DHD once. This was a long time ago and I haven't had any problems, all was OK. So at first I tried to search the forums, what might have happened. No post seems to be the same as my problem, because everyone is having these problems after an incorrect flash (my flash was correct, cause I've been using the ROM for more than 4 months!). Still I tried the solutions given in these posts (enter fastboot and flash again).
But it seems my DHD won't go into fastboot. When I hold VOLdown&power my DHD vibrates 5 times and shows a steady green led. So I thought maybe flashing a new ROM resolves the problem. If I cycle the battery and then connect is to my computer, my DHD goes into Clockwork recovery. From there I flased a new ROM to my DHD (update.zip method), but to no avail. I've factoryresetted, cleared al data, wiped battery stats, all to no avail...
As of this moment I'm at the end of my knowledge, I've done everything I know could have helped, but nothing did. Therefore I'm asking you, the Oracle of XDA (users), please does anyone have any clue what happened to my DHD and if so, how do I resolve the problem!
Thanks in advance for every little motivation/obligation you show be giving me your insights!
Info:
ROM: Android Revolution HD 2.0.9
CWM Recovery: 2.5.1.3
I've allready wiped battery stats as per this topic!
Additional thoughts: Might a hardware fault be the reason? Because it happened after some problems with BT, and also because I'm still able to correctly flash new ROMS with CWM though the problem remains?
Allright, so nobody know an answer I'm guessing... I've started the replacement process with my insurance company. However I'd still would like it if someone would know what the heck I did wrong...
Have you tried flashing a new radio, as that is what controls the hardware?
All a new ROM will do is update the RIL, not the radio.
http://forum.xda-developers.com/showthread.php?t=896597
Sent from my Desire HD using Tapatalk
It does more than likely seem like a hardware fault so it cant really be solved with software changes. Although I still would have tried to flash an RUU which updates basically everything on the phone to bare stock.
Use an RUU via your pc (v2.36 or lower so you can root it again) to restore to an out of the box state.
Allright guys, thanks for your ideas! I'm however experiencing problems trying your idea's. fFashing a radio or flashing a stock rom are not possible, because I need a connection with my computer. This connection is not possible, if I start the phone normally (or with vol down) I get the amber flashing light or the green steady light. Both do not connect to my pc, I get some device "Qualcomm CDMA Technologies MSN" for which windows can't find any drivers. When I let the DHD go into QWM recovery, the RUU won't find the DHD.
So I've tried extracting the RUU rom en putting this on the SDCARD of the DHD, but when I try to install it via CWM Recovery it says that it's an invalid file...
I actually bricked mine on purpose, and the thing that happened when it got bricked was that no lights and no life at all we're visible on the phone...
Atleast you get shakes and lights, thats a good sign!
Sadly i don't know what has to be done to restore it, but maybe Jkoljo does, PM him about your problem, if you get an assistance and some solving, write back here for your solution for others to use in the future!
They hang out in the Android Revolution HD IRC Channel, thats where i would go tbh.. Live support ftw!
Edit: While reading your above statement, it seems your drivers may be faulty in windows, redownload HTC Sync from htc.com, install, reboot, and try again.
The "Qualcomm CDMA ..." notification on the PC is a sign for the Qualcomm service mode. Also the 3 vibrates and the orange light is an indicator for that. You can enter this mode by pressing vol+ and power your device.
Stupid question, but is it possible that your vol+ button is stuck or something like that?
And you said you're able to enter CWM? how? I'm asking because you said you can't enter the bootloader.
I'll do some research when i get home today.
Meanwhile Try if ADB/Fastboot sees your phone
Edit: just checked my theory of the broken vol+ button: i held down my vol + button, took my battery out, reinserted it and powered up my phone. Result: 3 vibrates and a flashing orange light.
Then i did the same, but held down vol - ( vol+ still pressed). Result: your second phenomenon: a few vibrates and the green light stays on.
So I think this proves my theory because this is exactly what you described
I suggest you to play a bit with the vol+ button. Maybe the button will work again then
Sent from my Desire HD using Tapatalk
Well, I'm gonna fire up IRC then and try get some help. It's indeed not bricked as far as I'm guessing cause I do indeed have lights and I'm able to boot into CWM!
Flussen said:
The "Qualcomm CDMA ..." notification on the PC is a sign for the Qualcomm service mode. Also the 3 vibrates and the orange light is an indicator for that. You can enter this mode by pressing vol+ and power your device.
Stupid question, but is it possible that your vol+ button is stuck or something like that?
And you said you're able to enter CWM? how? I'm asking because you said you can't enter the bootloader.
I'll do some research when i get home today.
Meanwhile Try if ADB/Fastboot sees your phone
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
Right I'm guessing this is my problem! Just two days prior to resetting I started having problems with my VOL+ button (wouldn't work, only VOL- worked). So I'm guessing my hardware VOL+ button is broken and stuck to pressed...?
To answer your question about CWM: When I take out the battery so the phone is powered down, then reinsert the battery, connect the phone to the adapter or my computer (without pressing the power button), the phone boots into CWM after about 1 minute!
So after consolidating all the answers I'm guessing this is my problem: Hardware VOL+ is constantly pressed, therefore the phone boots consequently into Qualcomm service mode. Everything seems to be OK (flashing able to CWM), though just this little VOL+ problem puts my phone into an unusable brick...
The problem is that I'm not able to repair this myself (when I would try this, I'm guessing I'll break the seals therefore my insurance won't pay)... Anyone an idea how to circumvent the VOL+ button problem, without opening up my phone?
bdacier said:
Well, I'm gonna fire up IRC then and try get some help. It's indeed not bricked as far as I'm guessing cause I do indeed have lights and I'm able to boot into CWM!
Right I'm guessing this is my problem! Just two days prior to resetting I started having problems with my VOL+ button (wouldn't work, only VOL- worked). So I'm guessing my hardware VOL+ button is broken and stuck to pressed...?
To answer your question about CWM: When I take out the battery so the phone is powered down, then reinsert the battery, connect the phone to the adapter or my computer (without pressing the power button), the phone boots into CWM after about 1 minute!
So after consolidating all the answers I'm guessing this is my problem: Hardware VOL+ is constantly pressed, therefore the phone boots consequently into Qualcomm service mode. Everything seems to be OK (flashing able to CWM), though just this little VOL+ problem puts my phone into an unusable brick...
The problem is that I'm not able to repair this myself (when I would try this, I'm guessing I'll break the seals therefore my insurance won't pay)... Anyone an idea how to circumvent the VOL+ button problem, without opening up my phone?
Click to expand...
Click to collapse
Do you have needles at home? The ones you use when you repair cloth.. Try using one very carefully behind the volume +, you could also take a bit of A4 Paper, cut out some of it and make it fit between the gap of the Volume button, and try getting dirt out of there.
Allright, I've tried cleaning the VOL+ key but it still won't work. As a matter of fact I can feel a little "click" when pressing the VOL+ key, so I'm guessing the mechanical part of the key is working correctly. However when in CWM I can only use the VOL- key to switch thru the options, VOL+ is not registered by the phone. Therefore my assumption is that the there's a problem on the PCB with the VOL+ key, ergo a hardware fault... Insurance has been called and I'm up for a switch, now let's hope the insurance doesn't figure out I've rooted and installed another ROM than stock!
At least I wan't to thank all of you who've tried to help me! My ego has been saved, knowing it's indeed a hardware fault .
Cant you use adb within cwm to adb reboot bootloader?
Sent from my Desire HD using Tapatalk
bdacier said:
Allright, I've tried cleaning the VOL+ key but it still won't work. As a matter of fact I can feel a little "click" when pressing the VOL+ key, so I'm guessing the mechanical part of the key is working correctly. However when in CWM I can only use the VOL- key to switch thru the options, VOL+ is not registered by the phone. Therefore my assumption is that the there's a problem on the PCB with the VOL+ key, ergo a hardware fault... Insurance has been called and I'm up for a switch, now let's hope the insurance doesn't figure out I've rooted and installed another ROM than stock!
At least I wan't to thank all of you who've tried to help me! My ego has been saved, knowing it's indeed a hardware fault .
Click to expand...
Click to collapse
I've got the exact same problem! I don't have insurance on it though. And, im a day late for warranty.
What am i supposed to do? Any suggestions? Will htc deny my request to fix it coz it had a custom firmware?
Any help of any sort is appreciated.
I had exactly the same problem, and I'm sorry to say that I had to have it repaired. My button would also "click", but not register.
Maybe if you are buy a new power button from eBay?
Realising this is an old thread, but still:
I was just experiencing the same problem after I did a reboot to let one of my friends borrow my DHD to turn off the PIN code check on his SIM.
It started with the blinking lights (black screen), then I pulled the battery and found that my DHD was only accessible through ADB in recovery mode.
Did a couple of "ADB reboot" without any success, then tried using "ADB reboot recovery", which seemed to work (still black screen though), and then I did a "ADB reboot".
Back to normal!
hi , i had this issue too , its bcz of the moisture ur cell phone has absorb and as HTC desire HD very sensitive with its volume rocker area , the first thing that will be affected with moisture is ur volumer rocker circuit , try making it dry with a hair dryer blower or place ur phone in a rice sack for a day .
i am sure it will work .
OK.
I will put in a detailed info about what happened.
A week back, my wildfire's touchscreen started to function abnormally.
I was rooted and on Cyanogenmod 7.0.3
So, I flashed the phone with DK custom FROYO to make it look like sense so that the warranty is not void and took it to the HTC store.
They replaced the touchscreen for a flat fee (It was water damage according to them. But the phone was never used in wet conditions nor exposed to water)
But anyway, the phone was working fine when I brought it home from their store.
Then I flashed CM7.0.3 again.
And everything was working fine.
I OCed acc. to CM's settings to 652-352 Mhz.
And left the phone to charge in charger overnight.
When I woke up, the phone was off and there was just the red LED light blinking.
I tried to boot it again, but nothing works.
Pressing the power button does not do anything.
The phone still boots into recovery. At times.
I don't know what makes it boot into recovery. But at times it does, at times it doesn't. (Right now it's not booting into recovery no matter what I do)
Just the red LED keeps on blinking.
Please help.
I am not familiar with pushing commands onto the wildfire since I use a mac.
Please suggest any methods. If they involve using command line, I can use my windows PC for that. But please give a how-to of length enough for a noob ) ) to understand.
Thank you.
Pulz
EDIT :
I got to boot into recovery once. Tried to reflash CM7.0.3
It came to "Installing update" and then failed to go further.
Tried to install DK Custom Froyo 4.5
And it went to opening package and then failed to go further.
Now entering into a panic mode !
Red light blinking generally occurs when phone is hot and plugged in to wall socket. Is it so at that time ?
Unplug the charger or usb. Remove the battery and reinstall the battery. Try to boot into hboot mode (volume down + power) or fastboot mode (trackpad + power) . If your phone can boot into hboot/fastboot mode and has no restarts or power offs, then I think you can solve it.
Try to clear storage from hboot menu. Or factory reset from recovery once you enter it. If still it is not solved, try using "pc49img" method of flashing an RUU from the hboot menu. Hope it helps. Shouldn't help if there is hardware issue.
Sent from my Blade using XDA App
hye another noob here running on cm7.
actually i have the similiar problem my wildfire start rebooting over and over again but the cause is different.
this problem happen after i want to know what class my micro sd is.
what i do is i go to settings>storage>unmount sd card.
so after knowing the class were i insert back the card then the problem happens.
my phone start to crash then cm7 logo appear after that i enter my pin no so brought me back to the home screen after few seconds the logo appear again so i have 2 repeat the same steps...
this happen many times what i do is i remove the battery wait few hours then turn back on..
so help me if someone have the similiar problem and solutions.. thanks!!
Yesterday evening my Google Pixel XL suddenly went off and won't boot anymore. I can get into the fastboot menu, but every option I select(recovery mode, reboot bootloader), doesn't do anything.
The phone is stock android 8.0 and has never been unlocked, rooted or anything. I have tried the following:
- Holding the power button for several minutes, it vibrates every minute(I think this is the simulated battery pull).
- Trying to flash it from fastboot with adb & fasboot, but this doesn't work because I can't unlock the phone from fastboot.
- Left it off for the whole night charging, but also this didn't help, I can still only boot it in fastboot.
I tried some options, but they all require a unlocked phone, which I cannot manage from fastboot mode. Is this just an RMA or are there any other things I can try.
Haven't left stock in a while so not sure if still doable but have you tried --> fastboot boot twrp, then flash the full ota?
same issue
kidh0tsh0t said:
Yesterday evening my Google Pixel XL suddenly went off and won't boot anymore. I can get into the fastboot menu, but every option I select(recovery mode, reboot bootloader), doesn't do anything.
The phone is stock android 8.0 and has never been unlocked, rooted or anything. I have tried the following:
- Holding the power button for several minutes, it vibrates every minute(I think this is the simulated battery pull).
- Trying to flash it from fastboot with adb & fasboot, but this doesn't work because I can't unlock the phone from fastboot.
- Left it off for the whole night charging, but also this didn't help, I can still only boot it in fastboot.
I tried some options, but they all require a unlocked phone, which I cannot manage from fastboot mode. Is this just an RMA or are there any other things I can try.
Click to expand...
Click to collapse
Today I had almost the same thing happen. Was typing then the phone froze. No response. Then turned off. Won't turn on. Can use power and volume down I too can get into fastboot menu, but like you, when i chose anything, i see the Google start screen for a split second and then it turns off again. It seems like it wants to start up but then something is preventing it. This is all stock. Google said go to uFixiBreak, they think its the motherboard and can't do anything. Of course warranty is up. I fear there is nothing to do. Has anyone helped you out yet?
kidh0tsh0t said:
Yesterday evening my Google Pixel XL suddenly went off and won't boot anymore. I can get into the fastboot menu, but every option I select(recovery mode, reboot bootloader), doesn't do anything.
The phone is stock android 8.0 and has never been unlocked, rooted or anything. I have tried the following:
- Holding the power button for several minutes, it vibrates every minute(I think this is the simulated battery pull).
- Trying to flash it from fastboot with adb & fasboot, but this doesn't work because I can't unlock the phone from fastboot.
- Left it off for the whole night charging, but also this didn't help, I can still only boot it in fastboot.
I tried some options, but they all require a unlocked phone, which I cannot manage from fastboot mode. Is this just an RMA or are there any other things I can try.
Click to expand...
Click to collapse
Exactly what's happens with me. In my case i left charging over night and in the morning i couldn't even enter fastboot. Black screen all the time. Holding power button didn't nothing. Using fastboot buttons combination gave me some vibrations and that's all. I had to sent my Pixel to Google for a exchange. Still waiting my replacement device.
Check if warranty still covers your device and starts a RMA for a replacement.
dlhstick said:
Today I had almost the same thing happen. Was typing then the phone froze. No response. Then turned off. Won't turn on. Can use power and volume down I too can get into fastboot menu, but like you, when i chose anything, i see the Google start screen for a split second and then it turns off again. It seems like it wants to start up but then something is preventing it. This is all stock. Google said go to uFixiBreak, they think its the motherboard and can't do anything. Of course warranty is up. I fear there is nothing to do. Has anyone helped you out yet?
Click to expand...
Click to collapse
Cristiano Matos said:
Exactly what's happens with me. In my case i left charging over night and in the morning i couldn't even enter fastboot. Black screen all the time. Holding power button didn't nothing. Using fastboot buttons combination gave me some vibrations and that's all. I had to sent my Pixel to Google for a exchange. Still waiting my replacement device.
Check if warranty still covers your device and starts a RMA for a replacement.
Click to expand...
Click to collapse
Apologies for the late response, I kinda forgot I had this thread here
I started the RMA process the same day and I sent it to Google that day. They replaced the phone with a new/refurbished one that works now. They didn't tell me what the problem was or had any steps I could take to fix the problem(all the steps they had me go through didn't work)
So unfortunately sending it in for a RMA is the only thing I know about that works.
dlhstick said:
Today I had almost the same thing happen. Was typing then the phone froze. No response. Then turned off. Won't turn on. Can use power and volume down I too can get into fastboot menu, but like you, when i chose anything, i see the Google start screen for a split second and then it turns off again. It seems like it wants to start up but then something is preventing it. This is all stock. Google said go to uFixiBreak, they think its the motherboard and can't do anything. Of course warranty is up. I fear there is nothing to do. Has anyone helped you out yet?
Click to expand...
Click to collapse
I am having the EXACT same issue as you. Did you get the recent Android update?
Everybody have 128gb models?
Mine just did the same thing on the 6th last month. I can't boot further than the first Google logo, and OTA images do nothing. Completely stock and locked.
For reference, I have the standard size, 128 GB model. I can at least report that my flash memory is Toshiba, and the ram is from Hynix. I've been emailing with Google support for nearly 3 weeks now, and am unfortunately outside of the warranty.
Louisss15 said:
Mine just did the same thing on the 6th last month. I can't boot further than the first Google logo, and OTA images do nothing. Completely stock and locked.
For reference, I have the standard size, 128 GB model. I can at least report that my flash memory is Toshiba, and the ram is from Hynix. I've been emailing with Google support for nearly 3 weeks now, and am unfortunately outside of the warranty.
Click to expand...
Click to collapse
I have the same model and it won't turn on too,have to RMA
I had this happen back in October, and again in November.
Yes, it happened to the same Verizon Pixel XL 32GB, bootloader unlocked.
A few days after it abruptly shut down. I woke up one morning, and it was fully booted, data intact.
And again in November. I did a full teardown to try and troubleshoot.
It ended up being the oem charger block.
1 broken pin in the block crossed 2 other pins, and that was that.
Hello guys.
I just bought my Pixel 3 XL phone straight from the Google Store and it just arrived two days ago. After learning about Android Q, I opted-in on the android beta and downloaded the Beta 6 OTA update to my phone. The phone downloaded the OTA and installed it and it seems all is well until the moment it rebooted. It didn't turn on again. It won't turn on. I tried to force restart it by pressing the power button 10 seconds, 30 seconds, or even 1 minute+, won't turn on, no haptic feedback, nothing. I even tried the power button + volume down combo. I also tried plugging it to the original charger it came with for 30 minutes, nothing.
Before this, I have experience with flashing stock and custom roms with pixel devices and other brands (I have owned the OG Pixel until it wont boot due to its motherboard issue), and while normally, I could have just unlocked the bootloader and installed the beta firmware thru fastboot/recovery, or even installed a custom recovery, I didn't and instead tried the OTA update thingy (which claimed that you don't have to unlock your phone or anything). I didn't expect that it will brick this early and unexpectedly.
My suspicion would be that the OTA update broke the bootloader itself, or the firmware that loads the bootloader, thus not responding to the power button correctly. It's also not a power problem, because the phone warms up when plugged to the charger. Also, I download and applied the OTA while the phone is charging (around 70%). Could that also be the culprit?
I'm at my wit's end here. I'm thinking I should RMA this phone, which I haven't done before. Are there any similar issues like this before? Did anyone else had similar issues like this one?
wincaffeine said:
Hello guys.
I just bought my Pixel 3 XL phone straight from the Google Store and it just arrived two days ago. After learning about Android Q, I opted-in on the android beta and downloaded the Beta 6 OTA update to my phone. The phone downloaded the OTA and installed it and it seems all is well until the moment it rebooted. It didn't turn on again. It won't turn on. I tried to force restart it by pressing the power button 10 seconds, 30 seconds, or even 1 minute+, won't turn on, no haptic feedback, nothing. I even tried the power button + volume down combo. I also tried plugging it to the original charger it came with for 30 minutes, nothing.
Before this, I have experience with flashing stock and custom roms with pixel devices and other brands (I have owned the OG Pixel until it wont boot due to its motherboard issue), and while normally, I could have just unlocked the bootloader and installed the beta firmware thru fastboot/recovery, or even installed a custom recovery, I didn't and instead tried the OTA update thingy (which claimed that you don't have to unlock your phone or anything). I didn't expect that it will brick this early and unexpectedly.
My suspicion would be that the OTA update broke the bootloader itself, or the firmware that loads the bootloader, thus not responding to the power button correctly. It's also not a power problem, because the phone warms up when plugged to the charger. Also, I download and applied the OTA while the phone is charging (around 70%). Could that also be the culprit?
I'm at my wit's end here. I'm thinking I should RMA this phone, which I haven't done before. Are there any similar issues like this before? Did anyone else had similar issues like this one?
Click to expand...
Click to collapse
Plug the charger in and hold all 3 buttons together, not saying it will work but worth a try, it deletes battery stats and cache, if it does boot then keep hold of them for about 40 secs, hold them for over ten seconds even try for a whole minute, this sounds like hardware fault to me though. Also, if youve just bought it, swap it.
boe323 said:
Plug the charger in and hold all 3 buttons together, not saying it will work but worth a try, it deletes battery stats and cache, if it does boot then keep hold of them for about 40 secs, hold them for over ten seconds even try for a whole minute, this sounds like hardware fault to me though. Also, if youve just bought it, swap it.
Click to expand...
Click to collapse
I have tried what you suggested. Still nothing.
If I can I'd try to resolve this without returning the thing but yeah, it may really be a hardware fault. Guess I have to wait for a miracle to happen (like the phone turning on by itself after several hours, like with some posts that I have found around).
If all else fail, maybe I'd just ask Google to replace it.
Thanks anyway :good:
You may want to try to see if you get a USB notification from your computer on Windows and if it does try to flash it Back to stock. Hope it works
Sent from my SM-G975W using Tapatalk
kentek said:
You may want to try to see if you get a USB notification from your computer on Windows and if it does try to flash it Back to stock. Hope it works
Sent from my SM-G975W using Tapatalk
Click to expand...
Click to collapse
I also have tried that to no avail. The phone won't just turn on. Anyway I already returned the device. Thanks
wincaffeine said:
I also have tried that to no avail. The phone won't just turn on. Anyway I already returned the device. Thanks
Click to expand...
Click to collapse
Have you tried making an edl cable, to see if the phone boots to qualcomm flash/diagnostic mode. I dont understand why no one in this thread as mentioned EDL mode, its a life saver for when you brick your device. This allows a full factory image flash through qualcomm flash mode. Plenty of tuturials on internet for EDL. (Emergency Download)
boe323 said:
Have you tried making an edl cable, to see if the phone boots to qualcomm flash/diagnostic mode. I dont understand why no one in this thread as mentioned EDL mode, its a life saver for when you brick your device. This allows a full factory image flash through qualcomm flash mode. Plenty of tuturials on internet for EDL. (Emergency Download)
Click to expand...
Click to collapse
Because of warranty?