Hi- just arrived in Germany- I have data through wifi (mifi on german cell network via xcomglobal) but I cannot get a gps lock on my epic 4 g. Obviously I do not have any cdma service but does that prevent a lock? I need help quick as I was going to depend on google maps to get around! thanks
edit- another problem- although you can have wifi on in airplane mode exchange email will not work- you get some message "It's not supported now" So the only way to get push email is to leave the cell phone radio on (with no signal of course) which kills the battery in a matter of hours. Ever other connection, gmail etc works with wifi in airplane mode
Related
Hi,
My 3g connection keeps connecting even when i turn it off, within a few minutes i check again and its turned itself back on again, how do i stop this? i use 3g but only when im not in a wifi area...any help appreciated cas it seems be having a drain on my battery cas i have wifi and 3g on at same time then.
There are several 'services' that you can run on your phone that will cause 3g to keep connecting.
What have you got running?
ive got my emails setup, ive got stocks, also weather, skype (but not always running)
ok, have you set any of these to update automatically?
Plus, have a look on the Settings tab then data services also if you has agps set to on, i think this will also cause it to connect.
emails are automatic, but is it possible to do it via wifi when thats active? instead of activating 3g
Anyone have a short way to disable mobile networks except for WiFi while roaming? I'm taking a trip to the Caribbean, and I would rather use Google Voice and free WiFi than pay Verizon $1.99 a minute. Already have GV set up, just want to know how to disable the other data/voice network connections, or if that's even possible.
Also - if I've got WiFi Tether running in AP mode, can I bridge between my phone and the WiFi provider? The hotel I'm at charges you on a per-device basis (which really sucks), so I figured I'd run WiFi tether and just connect my laptop to the network via cell phone.
wifi on your device only goes one way, you can't use wifi to get data AND transmit data. you're either getting data via wifi, or you're using the network to get data, and transmitting data via wifi. i'm not sure of an option (like on a laptop or pc) which allows ISC (internet sharing)
RE: original question, airplane mode will disable all network connectivity except wifi.
Thanks Patches - didn't even try it out, had just assumed that Airplane mode meant all data went off, including WiFi.
Guess the solution to my roaming issue should be to disable roaming on the data side, and just not answer any voice calls that are incoming.
find out if google voice works on wifi.
also you'll have to consider sms fees also. i'd suggest contacting your carrier (vzw i assume) and tell them what you have in mind, and ask what charges to expect based on usage. how much for incoming and outgoing calls, txts and data. then approach each category and find possible solutions.
best bet is to pony up and get a prepaid phone for voice and txt charges, and wifi for data use on your android. FYI, you can send email to people's phone numbers. "ten digit number"@"carrier name".com (google to find out specifically the domain per carrier)
i don't travel internationally so i'm not very good at it, but i find prepaid phones are less expensive than the roaming charges, or calling cards.
I work in a building that is well shielded in most places and get no signal. My phone drains incredibly quick when this is the case. Is there a way to reduce the polling frequency that it looks for a tower to stop this? I thought juicedefender might but I can't figure a way to do this.
Rom: Fresh 4.0.0.4b
Kernel: netarchy 4.3.1.4 cfs have no sbc
hw version 0003
juicedefender ultimate
setcpu 200-1152MHz, smartass governor
Thanks!
When I'm in an area where I roam or have very poor signal I notice increased drain rate as well. This was the same with my TP2. I've always just understood that when the phone is constantly seeking signal and cycling back and forth between roam/3G/1x the battery drains faster.
Your best option, is to utilize "airplane mode" when you know you're going to be in an area that had no signal/you won't be able to use it. I hate to do it because I don't like my family not being able to reach me in case of an emergency, but it is one option for you.
I second the airplane option. Also, WiFi is available while in airplane mode. Perhaps your building has WiFi you can connect to and you can keep something like AIM or Facebook or Google Voice/Talk open and instruct those who might need you in an emergency to reach you through the method of your choice so that you may call out from a landline or step away from the building if there is an emergency.
Just a thought.
See if you can get in on the new Google voice option where you can make your sprint # your Google voice number. Once you have done that you can have your work # as one of your forwarding numbers if your work allows. Or airplane mode with a 2nd charger for work.
Sent from my PC36100 using XDA Premium App
Yep, Airplane mode is the ONLY way to turn off the cell radio. Otherwise, it will be constantly polling for a tower.
Dial ##3282# from a froyo sense rom and it will bring up a menu where you can change how often it polls the tower. It's Going to affect how long it takes your phone to receive calls though.
Sent from my EVO
If you know you're not getting reception, why not just use airplane mode? I mean, if you don't have reception you're not getting contacted anyway.
If you want to go the airplane mode route, Tasker is a great app that lets you control lots of things. You should be able to turn off your radios at set times during the day and have them enable after you get out of work.
I just loaded the 2.1 EPST and run a Verizon PRL when I am at work. I get a crappy Sprint signal at work. However your issue seems to be different as the walls/windows may be blocking all signals? Verizon seems to penetrate better though.
With Tasker, you can also set your phone to airplane mode during work hours, but automatically turn it off and enable data every fifteen minutes (or however long) to check for text messages, voicemails, etc. That is assuming that you get any signal at work... if you don't have a signal at all, just turn airplane mode on yourself.
To answer your question:
Yes, not having a signal will drain your battery. The phone will keep increasing the radio strength to lock onto a tower. Opposite is true to, if you have a strong signal, the radio will decrease the power level thus saving battery power.
You might want to contact Sprint ([email protected]) and let them know that you don't get service in your work building. They gave me a airwave device, but have to have Internet connection for it to work. The only other option might be to have some type of power booster/repeater that are typically very expensive. Not sure how your employer would feel about these suggestions - but never hurts to ask.
I am military and work on a base. The entire internet is locked down except for official military business, so an Airave device wouldn't work.
No internet, no cell signal and neither AM or FM penetrates. Maximum pain.
I'll try tasker, thanks guys.
tomplatz said:
I am military and work on a base. The entire internet is locked down except for official military business, so an Airave device wouldn't work.
No internet, no cell signal and neither AM or FM penetrates. Maximum pain.
I'll try tasker, thanks guys.
Click to expand...
Click to collapse
In that case, if you don't already have Tasker, I'd just turn airplane mode on yourself when you get to work & turn it off when you leave. Or there are free apps that will do it automatically that aren't as complex as Tasker. Unless you find another use for it, then go ahead.
Would roam control work to try verizon towers? I think they have a stronger signal locally.
tomplatz said:
I am military and work on a base. The entire internet is locked down except for official military business, so an Airave device wouldn't work.
No internet, no cell signal and neither AM or FM penetrates. Maximum pain.
I'll try tasker, thanks guys.
Click to expand...
Click to collapse
LOL you said it yourself. If the military doesn't want you getting signal, you're not getting signal. In general, if you can't get radio signal you can't get cell phone signal. Early cell phones operated on FM (type: frequency modulation) radio and what we're using now is basically a digital-type FM radio. In the end it's all EM waves and you're likely in a giant Faraday cage of a military base. I say avoid even trying to fix your problem and just go airplane mode.
Hi Guys,
So, I've been using the GNex for about a month. I moved to this phone from a Moto Atrix and here is what I have noticed and have looked around but didn't see any good answers to these questions I am having. Hopefully I get some answers here.
Device info:
GNex GSM version on ATT.
Running JB 4.1.1 Stock with Trinity Kernel (rooted and bootloader unlocked).
Issue #1: I get really bad reception at work. But, when I leave the building, my phone doesn't automaticaly connect back to the network. Sometimes, if I don't check my phone, it's been like that all night long until the next day when I have tried to make a call and it said "No Network Available" and I have to either reboot or toggle airplane mode to get back on the network. Am I missing something? In my past experience with other devices, they try to automatically connect back to the network when they loose connectivity. Also, if I get in an elevator during a call and the call gets dropped due to network unavailability, it doesn't connect back to the network and I have to toggle airplane mode. Has anyone else had this issue?
Issue#2: This is with the stock mail app. Specifically the search in this mail app. No matter what, it always returns zero results. Has anyone had this issue with the Mail App? If I use the Gmail app, it works fine. That's what I am using now, but am curious as to what I may be missing that make it not return any search results in the stock mail app.
Q3: Speed Dial: How do you set speed dial on the dialer? Is it even supported?
thanks in advance,
vG
verruckterGeck said:
Issue #1: I get really bad reception at work. But, when I leave the building, my phone doesn't automaticaly connect back to the network. Sometimes, if I don't check my phone, it's been like that all night long until the next day when I have tried to make a call and it said "No Network Available" and I have to either reboot or toggle airplane mode to get back on the network. Am I missing something? In my past experience with other devices, they try to automatically connect back to the network when they loose connectivity. Also, if I get in an elevator during a call and the call gets dropped due to network unavailability, it doesn't connect back to the network and I have to toggle airplane mode. Has anyone else had this issue?
it could be to do with your radio, what version is it? baseband version in about phone. im no expert but when i flashed a jellybean rom i had to update my radio afterwards cause my signal was dropping alot. i also had the same problem later on but that was down to my network operator. before i realised it was them i googled my problem and a few forums suggested that my sim card was goosed. so maybe check those three possibilities? i cant help with the other two issues unfortunately but good luck sorting it out!
Click to expand...
Click to collapse
Hello guys!
Here is the deal. I hope somebody is able to help me. I have a galaxy s6 920p with the ramified ROM (OH1 version on OI1 band) that works perfectly except for this weird issue. So, i am in Peru and i unlocked my phone, it works perfectly with my local carrier on LTE or 3G depending on the coverage EXCEPT when i connect to a wireless network(WIFI), if i do so my LTE 3G icon will dissapear as expected and be replaced with the WIFI bars and i would then be on Wifi internet which is fine. The problem comes when i move away from wifi signal or turn off the WIFI myself, the signal bar will remain full and i can make and receive calls normally but there will be a "!" sign next to it indicating that the mobile data is not working, the only way to fix this is by either rebooting the phone or setting it to flight mode for around 10 seconds and then bringing it back to normal, which makes my mobile data start working normally until the next time i turn on the WIFI. I have also noticed that my APN gets unticked everytime i connect to WIFI, regardless of this sometimes (i would say 30%) if i turn off the wifi the 3g/lte connection will resume normally. I am a pilot and sometimes i keep my phone without airplane mode, in the air i lose signal but as soon as i regain ground i recover my lte/3g, so this also indicates me that is not something related to the reconnection of signal itself but something regarding the WIFI. I hope you guys have any clue of what is going on here because it is really annoying and i haven't found any info about this. TY in advance!!!!