[Q] Trouble with ClockworkMod - G2 and Desire Z Q&A, Help & Troubleshooting

I have a T-Mobile G2, rooted with s-off. When I try to flash a ROM in zip form via ClockworkMod 3.0.2.4 I am confronted with an "Installation Aborted" message. On top of this problem, I cannot get back to my previous ROM (Cyanogenmod 7.0.3), getting stuck on the HTC screen as the phone is booting. I got rid of my original 8 gb SD card and put in another 8 gb one thinking it would solve my problems, then toyed with SD partitioning in ClockworkMod, which then led to this issue. Before both of these problems my GPS had stopped working and my data and wifi connection speeds had been drastically reduced (to the point of being useless) when I made the upgrade from the last Cyanogenmod release candidate to 7.0.0 stable. Are there any solutions to this problem, or is my phone pretty much bricked? Please help.

you are not bricked you still can get into recovery, i suggest try to relfash he recovery via fastboot adn format the sdcard again/or try a new sdcard the try to flash new rom or use a nandroid

Ok thanks ill give that a try.

Worked. Thanks!

no problem glad you got things working again

Related

[Q] 3G Not Working after Downgrade?

Hey all, long time lurker, first time poster....unfortunately....
So after sitting on MIUI for a good while, and having a blast with it, I decided to try out some other ROMs. I was interested in seeing Cyanogen 6, and so I went about attempting to get the latest stable, non RC ROM onto my EVO. I read into it seeing that I needed to downgrade my hboot, and found the image without a problem (running the .76 right now, had the 9something one before...)
Well, I downgraded my hboot without an issue, flashed the Cyanogen, and got into a splashloop. I figured out it was becaue I hadn't wiped my cache or data before flashing the rom, so I went into the Clockwork Recovery and wiped those, flashed once more, and it booted into Cyanogen perfectly!
Well, almost. I don't have 3G now.
For some reason, I am unable to connect to 3G no matter what I try. My nandroid's broke due to the hboot downgrading, rewiping the cache/data and reflashing cyanogen did nothing, and now for some reason, when I attempt to go back to MIUI, it still will not allow me to connect to 3G. I can send and receive texts, and make and receive calls, but alas, no data connection.
Should I get a fresh RUU and stock hboot, upgrade and restart from scratch? I just want to get back to MIUI at this point with a working, data enabled phone.....
If that's the case, that I do need to start over, where can I find a new hboot for the EVO that isn't .76? I'm pretty saavy when it comes to this stuff, but for some reason right now I just can't figure it out....
HTC EVO running MIUI v0.11 stable
.76 hboot w/ Clockwork recovery
Broken nand backup
whatdo?
Thanks in advance for the help
Sorry for the double post, but I resolved my issue.
I am unsure of what exactly went wrong, but I figured it was somewhere between downgrading my hboot, and flashing the CM 6 stable ROM that my 3G data got scrambled....
So! Using ROM Manager, I made a backup of my working (non 3G) MIUI image, and flashed the Odyxed version of the RUU found here (http://forum.xda-developers.com/showthread.php?t=836728). After flashing in Recovery, it booted into SenseUI, and worked like a charm!
My 3G hath returned, and issues have been solved. It's nice when you're able to fix things on your own, though I couldn't have done it without the help of that handy dandy search button, and the RUU keyword
Oh, yeah, and I guess xxbabiboi228xx as well.....maybe....^_~

[Q] Need help, not sure what's wrong

My problem is that I can't seem to flash certain ROMs they just hang on the HTC splash screen on the initial boot. I can use reflextsense 1.8, but I can't run robocik or insertcoins roms. I did have robocik's last rom on there , didn't like the rotation so I tried to move over to insertcoins and that's when the problem started.
I downgraded to a stock rom, then tried again, no joy. Any ideas?
completely formate your card mate then do full wipe and try again i have had this in the past and it was a memory card error
I will give it a go and keep you posted, thanks.
That worked, thanks.

Problems flashing RunnyDrOiD v5.0 By PVTEAM

I've been trying to figure out for the last hour or so why this rom hasn't been flashing correctly.
1. I've already loaded DZ HBoot onto the phone with S-OFF and had loaded the SenseGinger 3.0 Rom. Loved the layout but it was kinda slow for me. So that's when i was looking up other roms and found RunnyDrOiD v5.0 By PVTEAM.
2. next thing I did was download the Rom Manager, Flashed ClockworkMod Recovery sucessfully and selected install rom from sd card, (in which I had loaded the RunnyDroid rom on my sd card already.
3. Im in Recovery, wiped data, and the installation started. The problem I'm facing is that the installation says it was sucessful and says Rebooting, but the progress bar in the background is still going (looks like it was at 25%). Phone Reboots. Now it'll first start up with the HTC Logo, shuts off, then reboots again with the HTC Logo then goes back to clockworkmod recovery. I attempted to do it again, but still have the same results.
Anyone have any idea that I'm facing this problem? I really hope I can get this on my phone as the RunnyDroid rom looks really clean looking, and with other users reporting it to be fast, It's driving me nuts that I can test this rom out! *sad panda*
Anyone's help or support is greatly appreciated.
actually lock this thread. found out what the problem was. I flashed the wrong hboot. Be sure to use the DZ HBOOT FOR ANYONE HAVING THIS PROBLEM. Thank you all anyway.

[Q] Constant reboots after ROM flash

Hey, guys!
I am in a desperate need of help. Here's my situation:
I've got an HTC Desire (obviously), which reboots every time the ROM starts. It all began after I decided to move back to a Sense ROM after having been testing ICS for the past couple of weeks. So, I flashed RCmix S - a ROM I knew to be stable and working snappily on my phone. Everything went well, I restored my apps with Titanium and then decided to remove some of the junk stock apps. When this was done, I restarted the phone, only to be faced with a series of reboots every time I got glimpse of the Sense UI (i.e. seconds after unlocking the SIM card).
I thought this might be a ROM-related issue, so I tried another one - Supernova. Same thing. Tried flashing it several times after full wipe always. No luck.
During the whole process I switched HBOOTs a few times - from stock, to Fatsys (IN2SD), back to stock. Tried several recoveries (AmonRA, 4Ext touch).
Even flashed official RUUs at least 3 times in order to get the phone back to its factory state. Once the stock ROM worked fine. Then I went on to root it and tried flashing one of the customs ROMs again, which, predictably, began rebooting just after SIM unlock.
I thought this might be connected to problems with the SD card, so I reformatted it completely - 6,8 GB FAT32 + 1 GB Ext4, using GParted. All by the book.
No I've got a clean SD (removed all the previous folders), but it doesn't seem to solve the problems.
Can anyone, please, think of something that I could do in order to get my phone back?
P.S. I forgot to mention, that my phone is S-Off. It struck me as strange, though, that it stayed S-Off even after flashing the RUUs.
New development: this morning, after successfully creating a Gold Card, I went on to try and flash a 2.2 RUU again. This time, however, the installer announced it was unable to access certain files and thus the flash process had failed. Meanwhile, the phone itself displayed a triangle and an exclamation mark on the 4 corners of the screen. I no long can access Recovery or the Bootloader. Help me, please!
Never mind, I managed it myself.

[Q] CM11 snapshot/nightly stuck at boot... now can not even rollback to 10.2

Hi,
I had CM 10.2 running fine on my HOX. A couple of weeks ago I decided to test out CM11, since this is not my primary device, stability wasn't that big of a concern for me. The first few tries CM11 installation was a failure with some error (I can't recall) occurring when installing the zip in Recovery (if i remember correctly it had something to do with version of recovery I was using).
Anyways, I searched online, found a solution and was able to install the CM11. I have flashed the boot, erased the cache, tried wiping/factory resetting the device, in all kinds of orders (wiping/installing/flashing boot.img, flasing boot.img/installing CM11, etc). but no matter what I try my phone always stays stuck at the boot animation.
I found multiple threads on the forums with similar problems, but in most cases the OP was either missing flashing boot.img or erasing the cache helped. not so in my case.
Also, weirdly enough, now even if i try to reinstall CM 10.2 (which was working earlier), I get the same issue.
any further guidance on troubleshooting / overcoming this issue is highly appreciate
HOX International H__J15
HBOOT 1.31
CWM Touch Recovery 6.0.4.8
(btw, just tried Beanstalk ROM, same issue... I dont know what I F'd up on this phone!! )
nabeelmoeen said:
Hi,
I had CM 10.2 running fine on my HOX. A couple of weeks ago I decided to test out CM11, since this is not my primary device, stability wasn't that big of a concern for me. The first few tries CM11 installation was a failure with some error (I can't recall) occurring when installing the zip in Recovery (if i remember correctly it had something to do with version of recovery I was using).
Anyways, I searched online, found a solution and was able to install the CM11. I have flashed the boot, erased the cache, tried wiping/factory resetting the device, in all kinds of orders (wiping/installing/flashing boot.img, flasing boot.img/installing CM11, etc). but no matter what I try my phone always stays stuck at the boot animation.
I found multiple threads on the forums with similar problems, but in most cases the OP was either missing flashing boot.img or erasing the cache helped. not so in my case.
Also, weirdly enough, now even if i try to reinstall CM 10.2 (which was working earlier), I get the same issue.
any further guidance on troubleshooting / overcoming this issue is highly appreciate
HOX International H__J15
HBOOT 1.31
CWM Touch Recovery 6.0.4.8
(btw, just tried Beanstalk ROM, same issue... I dont know what I F'd up on this phone!! )
Click to expand...
Click to collapse
Your HBOOT is to low you must to upgrade ti 1.39 or 1.72 but 1.31 is tooo low and for this the CM11 don't boot
Actually I think 1.31 is the latest version which came out with jelly bean rom for the htc__15 id.
what's frustrating is that I can't even get the 10.2 version of CM working again either...which should be fine with this hboot version
nabeelmoeen said:
Actually I think 1.31 is the latest version which came out with jelly bean rom for the htc__15 id.
what's frustrating is that I can't even get the 10.2 version of CM working again either...which should be fine with this hboot version
Click to expand...
Click to collapse
try restore stock and chek for update restore nandroid and see I am not sure J15 is only 1.31
Will give it a shot tonight and report back. ...what's grinding my gears is none of the other roms including jb ones I tried are working either
i finally managed to resolve my issue. I tried changing recoveries, tried multiple ROMs and also tried to run RUU (which failed since i have a later version of the ROM vs. what's available in RUU).
finally decided to try formatting the boot, System and Cache partitions and installing CM11 again.
I had never used the 'format <partition>' feature before. Apparently this did the trick and now i am running CM11 .!!
nabeelmoeen said:
i finally managed to resolve my issue. I tried changing recoveries, tried multiple ROMs and also tried to run RUU (which failed since i have a later version of the ROM vs. what's available in RUU).
finally decided to try formatting the boot, System and Cache partitions and installing CM11 again.
I had never used the 'format <partition>' feature before. Apparently this did the trick and now i am running CM11 .!!
Click to expand...
Click to collapse
is HBOOT still the same version or did you upgrade it?
I am curious about the order in which you did things. After formatting boot, system and cache partitions, did you flash the boot image again or did you do that prior to the formatting.
Thanks

Categories

Resources