CyanongenMod 6.1
Download CyanogenMod 6.1 Touchwiz-Port (Android 2.2)
Based on CyanongenMod 6.1 for Xperia X1. Tanks @ squallvia
Original Source: http://forum.xda-developers.com/showthread.php?t=1030695
- working: Wifi, GPS, 2G/3G data, Sound, Market, etc.
- camera and fm radio did not work
known Bugs:
keyboard mapping:
change physkeyboard=rhod100_uk in startup.txt
rhod100_uk
rhod100_de
rhod100_it
rhod110
rhod210
tilt2
rhod400
rhod500
Installation:
First format your sd card with min. 2 parititions. (1x fat32, 1x ext2) Video: http://www.youtube.com/watch?v=oyO6DOS1leQ&feature=player_embedded
Read this: http://forum.xda-developers.com/showthread.php?t=1021658
- copy files to sd card (fat32-partion)
- copy attached startup.txt to /sdcard/nkpinstall
- run from windows mobile /sdcard/nkpinstall/install.exe (phone will reboot after finishing installation)
- run now, /sdcard/haret.exe
For CyanogenMod 7 use this link: http://forum.xda-developers.com/showthread.php?t=1008139
Maybe someone can help fix missing camera?
attached files = this files are different to original source
Thanks )
Hey thanks, tried this on my Rhod210 and it's very fast. Been running it all day today and it hasn't given me any major problems. I replaced the Kernal with the latest Wistilt2 one because I was having issues with my phone's screen waking up.
Keep up the good work!
Nice!! Its so happens that I'm getting an Xperia X10 in a couple days as well! Moving from my beloved Tilt2
But on the other hand... I'm getting a freaking Android device!!!
I'll be better able to support Rhodium now though since I will have both devices and will be able to port freely between the two
keymapping fixed:
change physkeyboard=kovsq in startup.txt
rhod100_uk
rhod100_de
rhod100_it
rhod110
rhod210
tilt2
rhod400
rhod500
For your interest:
Those builds above are forked or based or contain parts of my old ROMs.
An almost full working CM7.1 will be released later today to Team Members for testing on several devices. I am doing all my internal test on Rhod300 / Tilt2 and everything looks nice. So stay tuned it should be also available very soon to public.
So who's excited about magldr
Sent from my T-Mobile myTouch 3G using Tapatalk
dswaggz said:
So who's excited about magldr
Click to expand...
Click to collapse
Please, keep the useless off-topic comments to yourself.
To the OP, I've already posted a version of CM7 from Neopeek..
http://forum.xda-developers.com/showthread.php?t=1008139
I'll keep updating it as well. If this is for the Xperia X1, don't you think it belongs in that section of the forum?
Keep the CM6 build tho - I'd like to see one optimized for the RHOD, if possible...
As the annoying crashes with GAPPS have now been solved I will also pick up the CM6.1.X and recompile it after CM7 is out
arrrghhh said:
To the OP, I've already posted a version of CM7 from Neopeek..
http://forum.xda-developers.com/showthread.php?t=1008139
I'll keep updating it as well. If this is for the Xperia X1, don't you think it belongs in that section of the forum?
Keep the CM6 build tho - I'd like to see one optimized for the RHOD, if possible...
Click to expand...
Click to collapse
i will keep the touchwiz cm6.1 build. only camera and fm radion did not work. maybe someone can help to get camera working.
Hi i can not install the Rom´s with this kind of installation instructions.
can we get a detailed installing instruction please?
I tryd it several times, i don't know where i have to place the attached files...every time when i want to start via haret.exe the installer starts up and rebboting after the procedure aaahhhhhhhh
Pleas help
schlei said:
Hi i can not install the Rom´s with this kind of installation instructions.
can we get a detailed installing instruction please?
I tryd it several times, i don't know where i have to place the attached files...every time when i want to start via haret.exe the installer starts up and rebboting after the procedure aaahhhhhhhh
Pleas help
Click to expand...
Click to collapse
Check out this tutorial: http://forum.xda-developers.com/showthread.php?t=1021658
WoW my Rhodium100_de was never so fast in Android !!
Really nice im running the Cyanogen 6.1 Touchwiz with an 8gb class4 card impressive Speed !
Thx so much this is the way !
Can anyone tell me why my orientation is out of wack? the phone's orientation is either showing upside down or facing away from the keyboard when in landscape mode??
scattaman said:
Can anyone tell me why my orientation is out of wack? the phone's orientation is either showing upside down or facing away from the keyboard when in landscape mode??
Click to expand...
Click to collapse
Just turn off the auto orientation switch, this will fix the problem for now until a fix is released.
scattaman said:
Can anyone tell me why my orientation is out of wack? the phone's orientation is either showing upside down or facing away from the keyboard when in landscape mode??
Click to expand...
Click to collapse
The startup.txt file in the first post fixes the orientation.
New Download.
Changes:
- replaced startup.txt files
- replaced zimage and modules (rhodium - from last xandroid build)
- added ts-calibration file
walter79 said:
New Download.
Changes:
- replaced startup.txt files
- replaced zimage and modules (rhodium - from last xandroid build)
- added ts-calibration file
Click to expand...
Click to collapse
Thanks Man. I just tried the build out and it is awesome! I do recommend the 4/15 testing kernal with it. I appreciate your efforts with this. Looking forward to a stable CM7
vnes1984 said:
Thanks Man. I just tried the build out and it is awesome! I do recommend the 4/15 testing kernal with it. I appreciate your efforts with this. Looking forward to a stable CM7
Click to expand...
Click to collapse
You can use all new kernel. Only replace zimage and module file.
I do some test with clockworkmod.
Easy way for updates.
Related
As noone tried to fix android 2.1 codename Espresso, I tried and it works !!
working: (sorry Babijoe, I'm too lazy to write the whole list so I copy/paste it )
* Touchscreen:
* Vibration:
* Capacitive Buttons and Navigation wheel
* Radio
* GPRS
* Microphone works
* Charging
* Market
* Sound
* Gsensor:
* ramzswap
* Android system wide Mic support. Eg: Voice dialer works. Note: You must make a phone call first or play sound before it works for programs. (phhusson)
* Wifi
* did I forget something ? Flashplayer 10.1 of course !! it works but not smooth enough to watch movies !
* Bluetooth : turn ON/OFF pairs and A2DP works! but blac touchpad is desactivated and sound have echo of helicopter ! ALL CREDITS TO PHHUSSON
Not Working:
* Camera/videorecord
* GPS
DOWNLOAD LINKS :
Glemsom zImage kernel autobuild:
http://glemsom.anapnea.net/android/htc-msm-android/
or
zImage modules dirty (a.k.a. without debugging) it seems much faster:
http://balsat.hopto.org/
Base package:
contains startup without overclock cmdline, conf, additionnal apps, initrd, rootfs_3g_pb
http://xda.duttonbiz.com/Base_package/base_package0704.tar.gz
startup config :
contains startups with overclock cmdline
chech 1st post attachment
UPDATE rootfs autobuilds has wifi fix for rhod thx to [ACL] and phhusson
http://xdandroid.southcape.org/rootfs/
Rippped package 14/03/2010
http://www.sendspace.com/file/40t0rr
Rosie package UPDATE 23/04/2010
http://xda.duttonbiz.com/package_hero_rosie_23042010/system2304.sqsh
EDIT: cab install for rhod users thx to Reefermattness
http://forum.xda-developers.com/showthread.php?t=627997
If you like my work please donate
GUIDE
iceman198 did a great step by step with screenshots on howto install this build u can check it here
http://forum.xda-developers.com/showpost.php?p=6132485&postcount=1537
First boot takes about 10 min to boot so be patient
the OS will be smooth after that
CREDITS
thx to all developers that did the whole work and give us the chance to use android as a main OS on non supported HTC devices especialy phhusson, enatefox, nprussell, dzo, zenulator, Paul, [ACL], Chamonix, Stinebd, Makkonen, MrPippy, cr2, Markinus, Babijoe and anyone else who contribute to get this so far
thx to chkms, davidebeatrice, elroy944, kstephens98, Reefermattness, DracoLX for helping me correcting bugs.
thx to iceman198 for hosting my releases
This is from XDA and for XDA so fell free to mod it, or ask for help.
As I'm not a developer I did what I could to have a daily usable OS, so be indulgent
DONATORS
psycho_terror
g3rm0
OLDER RELEASES :
Rosie package UPDATE 19/04/2010
http://xda.duttonbiz.com/package_hero_rosie_19042010/system1904.sqsh
UPDATE 13/04/2010
http://xda.duttonbiz.com/package_hero_rosie_13042010/system1304.sqsh
UPDATE 07/04/2010 fix of market and boot issues
http://xda.duttonbiz.com/package_hero_rosie_07042010/system0704.sqsh
UPDATE 05/04/2010 fix of 3G connexion
http://xda.duttonbiz.com/package_hero_rosie_05042010/system.sqsh
UPDATE 04/04/2010 fix of settings force close
http://xda.duttonbiz.com/package_hero_rosie_04042010/system.sqsh
UPDATE 30/03/2010 REV B fix of htc apps
http://xda.duttonbiz.com/package_hero_rosie_30032010/system300320101revb.sqsh
UPDATE 30/03/2010
http://www.sendspace.com/file/kid8cp
rosie package 29/03/2010 HTC SENSE SIZED
http://www.sendspace.com/file/qmkfbq
rosie package 28/03/2010
http://www.sendspace.com/file/c89tnf
older releases
http://www.4shared.com/dir/32335779/5c5ec6f1/sharing.html
cheers
Klinux
screenshots and youtube video running htc sense
I know you guys you prefer see with your own eyes !
here we go :
thx to whitefalcon for the screenshots
video of this ROM running on WVGA device:
http://www.youtube.com/watch?v=IXd5WC2y6lQ
thx to tomanlam for the video
video of this ROM running on VGA device:
http://www.youtube.com/watch?v=C3kBzSMkX5Y
thx to fastrat350 for the video
changelog
05.03.10 changelog:
- as many of you was confused to what file to use under which folder,
I packed all the neccessary files on one archive see link above
- WIFI supported now
- boot sound removed (I reboot so much so it get me realy ignoyed )
- some mod on system files to support BT in the future
- disable HW3D as the new zImages causes problem booting the system on blackstone
08.03.10 changelog:
-added package with rosie (HTC Sense)
-moded the boot animation
-updated rootfs this should correct other devices keymaps
-added files to support bluetooth on future releases
09.03.10 changelog:
-moded the boot animation it's centered now
-added files to enable bluetooth
-rosie package will be updated later
15.03.10 changelog:
- phhusson corrected the bug with rhod it was a conflict with wifi I added two rootfs one is latest git (rootfs.img) and the second is rootfs with calibration.
- system is more ripped.
- rosie package from htc eris thx to ACL for the link it seems faster than mine, I test it apart some rosie reboots and market everything is fine I will decide which one I will use by default after your feedback
- I added a new file named custom.tar.gz; this file contains the first boot optimization of time so if u can compare how many time it take with and without it will be cool (if u use it with existant data.img it will erase your customizations so be aware )
- don't use custom.tar.gz with rosie package the system will not boot !
-added some apps from xandroid package thx to babijoee
16.03.10 changelog:
- added sms fix from rootfs git all credits to phhusson
- added some mods to fix wifi problem on rootfs git (diam/raph/blac/topaz) rhod owners should wait
I uploded two rootfs: rootfs3Denabled and rootfs3Ddiasbled
- use 3Denabled on diam/raph
- use 3Ddisabled on blackstone
- on tapaz/rhod u can try both and give feedback, cause I don't know if 3D is supported or no
19.03.10 changelog:
- merged rootfs with all fixes
- add auto 3D enable/disable by device
- 3G should be fine for all providers
20.03.10 changelog:
- rootfs for all devices rootfs.img 3D desactivated roll back to the newer ril=phone driver
- rootfs_3G_pbs for those who have problem with their provider (VODAPHONE) with old ril
21.03.10 changelog:
- 1st try to fix britghness
28.03.10 changelog:
- fix for britghness
- new system.sqsh from HERO thread it's more stable and as responsive as on my HERO, I test it during 7h no force close at all !! thx to nprussell for this jewel !!
- market fixed
- google sync fixed
- 2G / 3G switch works thx to phh it force close the phone but works after
- teeter works partialy give it a try it's slugish but as responsive as winmo's one
- 3D gallery works partially but slow
- hexagon home tabs works by tape power button on the main home tab but undersized
29.03.10 changelog:
- 1st htc sense package with sized htc apps thx to [ACL] for the hint to use htc desire apk and thx to paul for the htc desire rom
- it's an alpha version so your feedback will help to fix it
30.03.10 changelog:
- fix for setting
30.03.10 changelog:
- fix of all htc apps FC
- settings could not accessed now
04.04.10 changelog:
- fix of settings Force close
05.04.10 changelog:
- fix of 3G connexion
07.04.10 changelog:
- fix of 3G connexion
- fix of market issue
- fix of loop on boot screen
-wifi still don't work for me test please and post feedback
13.04.10 changelog:
- use eris drivers to make the system smoother and more responsive
- my blac heat way less than before please confirm from youe side
19.04.10 changelog:
1\ ROOTFS
- update rootfs to enable wifi on rhodium thx to [ACL] for his work please test and post feedback
2\SYSTEM
- use eclair drivers to make the system smoother and more responsive
- update bootanimation thx to La3bna and enable boot sound
- add WifiTether to test please my blac's wifi is screwed
23.04.10 changelog:
- use nearly all desire framework this correct a little graphic bug on unlock pattern
- use aderno200 drivers (desire 3d drivers) the only improvement untill now is visible on teeter 1st load
hey k_linux this is unholy from htc-linux, just wanted to let everyone know that this image is fast, i dont know if it will be as fast for you, i have my android at 700mhz, anyways if you want expreso 2.1 look no further.
btw: as you can see iv got a raph so it might work for other devices tooo
any ideas this goes well on diamond
Looks great!
Any idea if you can get wifi working?
Thanks!
sraaj said:
any ideas this goes well on diamond
Click to expand...
Click to collapse
it's so slow on diamond, but you can always try
brodos123 said:
Looks great!
Any idea if you can get wifi working?
Thanks!
Click to expand...
Click to collapse
it worked well when I first try it,
so I think it will be possible in near future
klinux said:
I know you guys you prefer see with your own eyes !
here we go :
Click to expand...
Click to collapse
Hi! thank you!
could you make a systemsqsh from the hero file system please?
Hi
I downloaded the 3 files.
-eclairhero.user.conf
-rootfs.img
-system.sqsh
As I understand I use a haret.exe and startup.txt file from another build?
But what modules/zimage do I use?
the conf file, is it suppose to be directly in root of sd card or in a conf folder?
Also do I use only one fat32 partition?
can I use swap and ext2?
Thanks!!
brodos123 said:
Hi
I downloaded the 3 files.
-eclairhero.user.conf
-rootfs.img
-system.sqsh
As I understand I use a haret.exe and startup.txt file from another build?
Click to expand...
Click to collapse
as haret and startup doesn't change I didn't add it so yes use those from eclair
brodos123 said:
But what modules/zimage do I use?
Click to expand...
Click to collapse
download the latest zImage from glemsom's website
brodos123 said:
the conf file, is it suppose to be directly in root of sd card or in a conf folder?
Click to expand...
Click to collapse
conf file should be on conf directory
brodos123 said:
Also do I use only one fat32 partition?
can I use swap and ext2?
Thanks!!
Click to expand...
Click to collapse
u can use fat32 or ext2 systemfile as the rootfs support both of them
hope this will help
cheers
klinux said:
as haret and startup doesn't change I didn't add it so yes use those from eclair
download the latest zImage from glemsom's website
conf file should be on conf directory
u can use fat32 or ext2 systemfile as the rootfs support both of them
hope this will help
cheers
Click to expand...
Click to collapse
Thanks klinux!!
So is this with proper scaling, like, native 840x400 reso?
I was thinking of trying to port the Desire's sense UI btw..
Powerbik said:
So is this with proper scaling, like, native 840x400 reso?
I was thinking of trying to port the Desire's sense UI btw..
Click to expand...
Click to collapse
I ripped all unscalled htc's apk so we have OS with correct resolution, by the way if you can port the Desire sense apk it's always welcome !
klinux said:
I ripped all unscalled htc's apk so we have OS with correct resolution, by the way if you can port the Desire sense apk it's always welcome !
Click to expand...
Click to collapse
Hah, I'm no expert, faaaar from. I want to give it a shot any of these days though.
maybe you should include to add a initrd.gz in the 1st post, wouldnt boot otherwise ("reboot in 7 seconds" and then freeze)
im looking at the boot animation as i write X=)
N!ghty said:
maybe you should include to add a initrd.gz in the 1st post, wouldnt boot otherwise ("reboot in 7 seconds" and then freeze)
im looking at the boot animation as i write X=)
Click to expand...
Click to collapse
ok, guys I will make complete package with all files, as I write now I'm fiwing wifi issues and BT!
stay tuned
cheers
klinux said:
ok, guys I will make complete package with all files, as I write now I'm fiwing wifi issues and BT!
stay tuned
cheers
Click to expand...
Click to collapse
I'm just downloading the components myself (as you described, and putting them all together.... should take me an hour or so).... I'll play with it, and if it's working, I'll make an installer cab and release it... with credits to you of course.
What's not entirely clear is, is this Blackstone only? Of late, my releases have been device agnostic (and the installer supplies the correct startup.txt file for any given device).
My Android skills are limited, so any help on which devices are supported would be great.
Also, nobody's ever gotten around to giving a GOOD description of the function of each component...
e.g.
zImage - linux kernel (the absolute 'hub' of the linux OS)
modules.xxx.xx - additional files required by kernel.
initrd.gz <--- unclear what this is
system.sqsh <--- what IS this actually storing.... is it Android or is it customisation or is it both??
rootfs.img <--- what's this?
conf\xxx.conf <---- this is also unclear
Now don't get me wrong, conf is clear that it's helping the OS know where certain partitions are, and how to behave in terms of pagefiles etc etc, but the naming convention isn't clear or why it changes name (why's it not android.conf?)
Any info on this would be superb since I'd like to add it to my FAQ.
Could only get as far as the Hero logo (displayed towards top left of screen)... heard the Hero startup sound and the anim, then the screen stays in a loop of the animation and startup sound.... left for 3 mins the same....
Have to do a new build of something else before I return to this (so will be half a day now)... but will definitely come back to this
it looks great, worthy of giving a try, thanks...
So guys, I didn't want you to wait more days so I am just releasing current state. So far this build seems to be the one I will work on as it runs fast.
My wife's sitting in my neck last days cause I was sitting too much in front off my netbook. Anyone wanna help me?
As I said it runs very smooth. Just try it for your own and give me feedback
Important:
- This release runs fast but keep in mind: When first booting it. Don't touch your device the first 10mins after it has booted into Android cause it will execute a script and do optimizations and therefore be slow. Next boots will be fast and also device will be fast.
If anyone would provide me with Linpack Benchmarks I would be grateful
You are responsible for everything what you do with your device. Don't blame me for not reading instructions carefully. It works when you know what you are doing. read thread posts
Installation:
Like the last EXT2-builds: Use my Haret-Paket. You may download latest on my Homepage.
Installation Instructions
Download latest Release here
Report Bugs here
Wishlist for next release
Video which shows how I run LinPack and get a result of 3.6MFLOPS. When overclocking I get 4.04MFLOPS:
Video
What has changed in the latest Build:
- Removed uneccessary apps
- Replaced Launcher with ADW Launcher (screenshots will follow)
- GPS works now
- Updated apns-conf.xml
- some other smallies
- you will have to use an app called "Quick Boot" for correct powerdown / reboot (go into Market and download it for free -> will be included in next release)
Known bugs:
Setting ringer volume only works with up/down buttons when changing ringer
Camera does not work
Battery draining
Google Mail ?
Reboot procedure (see Hint above)
some smallies (please let me know in Bug + Wishlist)
This should work on your device. Diamond Users get it running. Anyone get it working here? It's based on XDAndroid rootfs + kernel. So it should work. Maybe an experienced user wanna try it?
You may follow main-thread in Diamond-section of XDA-Developers
Wow...
Do you have some screenshots?
i apologize but i'm a bit confused.
whats the difference between your build and any other 1.6 build?
i see you made it an ext2 instead of a sqsh but whats different in yours than the original 1.6?
as far as i know the development on the 1.6 is at the same place as the 2.1. same features minus those found in 2.1 and not in 1.6.
I'd be curious as to what differentiates this build as well... perhaps I'll just have to wait and see for when you post it & I can run it and see for myself...
I am rather curious, but you should have perhaps waited till you had more time to introduce a better post rather than confusing some people ;P.. (such as me!) Did you create a proper bootloader for the Touch Pro devices or what? Haha.. Sorry, I'm rather curious!
Well using partition means you don't have to edit the System.sqsh to add apps and do modifications, Looking forward to it!
Re: [UPCOMING][Neopeek's ANDROID DONUT 1.6] ext2-filesystem - NoSquash
The ext2 can be made very easily from our sqsh systems. There is a program called staysafe that will do it for you in android. There is a thread for it somewhere on xda with all the needed files. It says that it is for cupcake and donut but I've used it in eclair without problems. Using rootexplorer, I needed to change to an ext2 system to get root accesss writeable. Worked very nicely. Only downside is the ext2 system is huge compared to sqsh. I want to say the ext2 was aroung 500mb.
Sent from my AOSP on XDANDROID MSM using Tapatalk
vatoloco said:
Hi all,
just wanted to let you know that i succeeded in putting Android on EXT2 of internal memory. SO THIS WILL WORK FOR YOU AND YOUR SD_CARD, TOO! IT WILL ALSO WORK ON THE OTHER DEVICES LIKE TOPAZ RAPHAEL ETC.
I will later explain how to get it running and offer the complete package for download. I will need some hours, though cause I am at work now. So you will have to be patient. Tomorrow is my birthday, so don't expect too much support. Only thing I can say: This build's gonna rock your phone and ist extremely fast!!!
First build is based upon Android Donut 1.6
I will contribute a Froyo build some days later, though this will be just for testing and is instable / not productive
I don't know if this is going to be on top or anyone is going to make this sticky. But the original thread is created at DIAMOND-Forum. So beware of cross posts and please post your comments to original thread here. On the other hand: If no one posts then this thread won't be up any more. Regardless: I will only post updates and comments to original thread.
Click to expand...
Click to collapse
I you using the same method as this
i really dont see anything new here, other than just providing something that balsat has been provding for the past 3-4 months, with a step by step guide that anyone can follow
amazing extremely fast on my diamond thanks vatoloco
1.6 work very fast but froyo is slow.
Just to bring this up again. Perhaps someone wanna try ports from HTC Vogue (need feedback)
vatoloco said:
Just to bring this up again. Perhaps someone wanna try ports from HTC Vogue (need feedback)
Click to expand...
Click to collapse
I could give it a try.
TheDeadCpu said:
I could give it a try.
Click to expand...
Click to collapse
Ok. So please let me know what you are thinking about this.
The main-thread can be found here:
http://forum.xda-developers.com/showthread.php?t=695215
Ok new build is coming up, soon! Just to let you know:
I got 4.04MFLOPS in Linpack with my build. You may check main-thread for screenshots and video.
First post updated with screenshots
vogue port htc pro 2
I need help cannot get donut 1.6 to work keeps coming up at the android boot suspend and alot numbers come up it want boot into android
First post updated.
Just wanted to let you know that CyanogenMod SuperE-Port is available for download (follow signature). The build from the first post of this thread is also confirmed by users to work on Touch Pro & Diamond2. Have fun!
Very fast
But i have one problem:
I can't install apps. There is a error message which says there is no free disk space.
I have a 8gb microsd. 3,6GB fat and 4gb ext. Booth partitions have more than 2GB free diskspace ...
Can someone help me?
(Sorry for my bad english )
CyanogenMod 6 Kaiser [RLS5.2] - RC2 based, odex:ed build [6.8.2010]
This release is based on CyanogenMod 6 RC2, modified to be Kaiser & Polaris friendly (and hopefully Vogue too). Parts of other releases, mostly dzo's Fresh Froyo are also used.
What's new:
RLS5.1:
- Completely re-done release, based on CyanogenMod 6 RC2 FRF91
- System completely odex:ed (thanks kallt_kaffe for all your help with this)
- Google Apps FRF91 MDPI
- Wifi tethering - courtesy of urban69 and kallt_kaffe.
- Removed most of the "bonus" apps except Astro File Manager, due to /system size limit. To get YR Weather Widget, Brut Maps, Linpack or Nexusrevamped Live Walpaper dowload the AppPack.zip here, unzip the files to your SD card and install via Astro..
- Experimental libhtcgeneric-ril.so to enable 2G/3G switching (again all credits to kallt_kaffe) included. The enable/disable "2G mode only" switch in settings now works!!
For best performance enable compcache in Settings > CyanogenMod Settings > Performance. If you want to squeeze even more out of it disable dithering, also in Settings > CyanogenMod Settings > Performance.
Download RLS5.1: Mediafire, FileFactory or Megaupload!
Update RLS5.2
-New version of experimental libhtcgeneric-ril.so to enable 2G/3G switching (again all credits to kallt_kaffe) included
RLS5 and RLS5.1 can be updated to RLS5.2 via update attached below: rls5_rls5-2_update.zip.
What works:
Everything should be working as in other Froyo builds. But I may have missed someting - if so, please report!
- Phone: calls, SMS, standard stuff..
- Camera
- BT & BT audio
- Wifi
- Email
- MMS
- Exchange sync, Google sync
- Market
- GPS & Wireless (WiFi or Data) location
- JIT
- Compacache
- et cetera..
Installation:
Put the androidinstall.tar to /andboot folder and install to SD / NAND. SD users will find complete SD HaRET distro attached below, with zImage-froyo-26-07-10 (HaRET.zip). Edit default.txt according to your needs and wishes, but it should be o.k. for most Kaiser users (except panel and battery parameters - fix those). Polaris users should edit default-polaris.txt for Polaris. Vogue users need to use their standard default.txt.
I've tested RC5 on SD (ext2/ext2) install, so I really don't know how it will work on NAND.
If you have problems with Wifi connections, you can try other power levels using script made by kallt_kaffe:
Code:
$ sudo
# wifi_level.sh low|medium|high
To switch between Froyo | Eclair | Paid Market, use a script market.sh, made by kallt_kaffe:
Code:
$ su
# market.sh eclair|froyo|paid
There is a small DeskClock.apk issue in RLS5.X. To get back DeskClock.apk from RLS4, which is o.k. for our resolution, apply attached DeskClock_fix.zip.
Screenshots:
Check them out at CyanogenMod 6 screens page.
Credits go to:
- mssmision for porting CyanogenMod 6 for our devices and all the other work his done
- dzo for his kernels and Froyo releases - without you man there would be no Vogue/Kaiser Android community
- kallt_kaffe for many many contributions he made to Android Vogue/Kaiser community
- Incubus26Jc also for his fine builds and many contributions made to Android Vogue/Kaiser community
- Brut.all for his Maps mod
- DmK75 for the default.txt for Polaris and all the other contributions his done in testing and delivering fixes for this build. Thx man!
- Complete Vogue/Kaiser community
Thank you guys for your great work and sorry for stealing your ideas and soultions, but they're just to tempting not to be used and abused.
I'd be glad to get as much of your feedback as possible. Enjoy!
============================================================
History
RLS4:
- Fixed bootanimation to comply with 240x320 res, also slimmed down bootanimation.zip by 1 Mb
- Replaced all Google Apps with the FRF91-mdpi version
- Updated ADW Launcher to latest version 1.0.1-mdpi
- Removed LinPack
- Included updates from RLS3 in the main build
- Other smaller modifications and optimizations
RLS3:
- Replaced old Vending.apk with a new one from FRF91 source to fix constant FC'ing
- Replaced some other system resources with FRF91 source
- Updated ADW Launcher to latest version 1.0.1
- PNG'optimized and zippaligned all apk's - shaved ~ 10-15% off in average
- Optimized all OGG files - shaved 20-30% off in average (you shouldn't, but if you notice any drop in ringtones quality, please inform me)
- Included Brut Maps, Astro, NexusRevamped LiveWalpaper and LinPack in the release, on the account of newly freed space
- New kernel zImage-froyo-26-07-10 added to HaRET.zip
- Included Wifi tethering fixes made by kallt_kaffe (thx man, great work). No more post installations scripts needed to make it work.
Nice work! Sometime I will try this build.
Just about the best i've tried yet.
This is by far the most responsive version i've tried yet and i've spent about two days trying all the versions mentioned in the
"Android Build Index - Look here before asking" -I can't post the link-
I'm trying this on NAND. I can't get Wifi to work on my kaiser but i'm going to keep playing around with this one.
Love the speed.
Oh, what is the name of the female football picture/wallpaper?
Hi,
I will try it on my Pola.
This build is useful for using bluetooth speakerphone in car?
Chick wallpaper.
http://bit.ly/acABBj
wifi won't start. It just states "error"
@nemuro are you a Kaiser or Polaris user and did you apply my update?
Best yet!!
I'm not sure how, but Wifi is now working. It may have something to do with fixing permisions between a re-install. This version is quick and snappy. My favourite so far!!!
milanche said:
If you find any problems, please report..
Click to expand...
Click to collapse
Where i install update, i seen message "tar: short read"
Is error?
DmK75 said:
Where i install update, i seen message "tar: short read"
Is error?
Click to expand...
Click to collapse
No. It installed fine, don't worry! I get that error too, it has something to do with the way 7Zip I use makes tarballs, but it has no effect on install.
milanche said:
@nemuro are you a Kaiser or Polaris user and did you apply my update?
Click to expand...
Click to collapse
Yes, I applied the update. I am using kaiser, and haret + latest z-image. Is it the problem that I am using a wrong version of default.txt? Do you want me to post that file?
Gonna try it tonight...
Ive been using urban69's rom for 5 days and have enjoyed it although am having application fc's frequently and still dealing with the battery issues....I'll try this on Nand tonight and reply back....Thanks for all your work!!!
If it weren't for all of you dev's we'd be in tech limbo!!!
First of all...Im new to installing Android on Kaiser, so sorry for stupid q's and stuff...
Ive installed it on a danish Tytn II, it works, with some errors...
1. Wifi doesnt work(dont know why...just doesnt find any networks(and it seems to have no macaddress, at least thats what the infobox says, the same about bluetooth)
2. No marked...Weird i think
3. Battery stuck at 15%
4. i sometimes have problems answering calls...
Think that was it for now...Else its a great build...Thx a lot..
THink i will install another build for now...but will probably try it again...
milanche said:
No. It installed fine, don't worry! I get that error too, it has something to do with the way 7Zip I use makes tarballs, but it has no effect on install.
Click to expand...
Click to collapse
Thank for this build!
I install it on my Polaris and tested: Wifi, BT and GPS works.
Also i noticed full russian translate and working superuser app!
One issue in Market, it sometimes "stopped unexpectedly".
nemuro said:
Yes, I applied the update. I am using kaiser, and haret + latest z-image. Is it the problem that I am using a wrong version of default.txt? Do you want me to post that file?
Click to expand...
Click to collapse
Please try my latest release where all needed HaRET files are included. And don't forget to change panel type in default.txt to correspond your panel!
Zalasta said:
First of all...Im new to installing Android on Kaiser, so sorry for stupid q's and stuff...
Ive installed it on a danish Tytn II, it works, with some errors...
1. Wifi doesnt work(dont know why...just doesnt find any networks(and it seems to have no macaddress, at least thats what the infobox says, the same about bluetooth)
2. No marked...Weird i think
3. Battery stuck at 15%
4. i sometimes have problems answering calls...
Think that was it for now...Else its a great build...Thx a lot..
THink i will install another build for now...but will probably try it again...
Click to expand...
Click to collapse
That's weird. I have Wifi and BT working. Please download the new full SD HaRET release from first post and see how this one works for you. It has all needed files included, including latest 15-7 kernel.
Added new complete androidinstall.tar release to first post!
doesn't work on nand, it's too fat to be installed in nand... the update fails with no space left on device as does the new androidinstall
i guess something needs to be took off to install in nand
milanche said:
If someone is kind enough to send me default.txt for Polaris, I'll be glad to include it!
Click to expand...
Click to collapse
Here default.txt for Polaris, i use it.
DmK75 said:
One issue in Market, it sometimes "stopped unexpectedly".
Click to expand...
Click to collapse
Yes, I have the same problem. Will look into it.
DmK75 said:
Here default.txt for Polaris, i use it.
Click to expand...
Click to collapse
Thank you very much! Will include it into next release.
succo said:
doesn't work on nand, it's too fat to be installed in nand... the update fails with no space left on device as does the new androidinstall
i guess something needs to be took off to install in nand
Click to expand...
Click to collapse
Ok, thanx. I'll look into it.
The last days Froyo rubbed all my nerves. As promised earlier to a few members I decided to update CM5-builds. And here is the first Final release of my Eclair-builds:
VaniljEclair from kalt_kaffe (original thread from HTC Kaiser)
Changelog:
[*]V1.1 is a 1-file-download. The ZIP-Archive contains everything you need!
What's Included:
Latest LauncherPro
Compcache activated
Browser removed and replaced by Dolphin Browser HD
Performance tuning
[*]1-file-download due to FINAL release V1.1 -> read Install Instructions carefully!
To get the full performance out of all my builds you have to open all apps once and then restart your device 1-2x times
Known Bugs:
Camera is broken
If you wake up your device and the screen stays black -> just slide from left to right as you would do when unlocking the phone -> The display will wake up immediately.
Used sources for this Port:
kalt_kaffe's VaniljEclair ROM for HTC Kaiser
XDAndroid: rootfs + kernel (2.6.27)
Credits go to: Cyanogen + Cyanogen-Team, kalt_kaffe, XDAndroid-Project, Balsat and top everyone else whom I have forgot! You may consider a donation to all of 'em!
Download + Installation Instructions (read carefully):
Neopeek's VaniljEclair-Port CyanogenMod 5.0.8
RE-EDIT: This Text is copy&paste for all threads on all compatible devices! Everything works fine for my Diamond. I still have no other device then a Diamond. I am still a one-man-show regarding my Android-Ports. So don't blame me for anything that doesn't work for you on any other device...
thank you very much
Can you post some screens please....
Hi vatoloco,
I couldn't see anything run on my Blackstone,always show black screen.
Thanks for the good work
mike86_tsai said:
Hi vatoloco,
I couldn't see anything run on my Blackstone,always show black screen.
Thanks for the good work
Click to expand...
Click to collapse
me too,it`s always show black screen
try turning off 3d in startup...
vatoloco said:
try turning off 3d in startup...
Click to expand...
Click to collapse
How can i do it? where?
always black screen, what to do?
Finally, I can see the main screen, just follow the below setting
Originally Posted by NemanjaLO View Post
Got it WORKING without force close!!!
Before first boot edit your startup.txt and add this to "set cmdline" "hw3d.force=1" and keep TouchFlo running in WinMo. You also need to disable boot animation in tar.gz package: For this you need linux system, open your archive in linux and find init.eclair.rc file in init.cfg folder and disable this lines:
#service bootanim /system/bin/bootanimation
# user graphics
# group graphics
# disabled
# oneshot
But after boot , I could turn on the wifi,but couldn't get ip.
GPRS ok.
Bluetooth ok,but the voice have a lot of noise,microphone ok.
GPS ok.
speed is good.
Thanks for the good work
you dont have to do that anymore, hw3d is working, but gralloc from the "hw3d thread" has to be replaced to /lib/eclair/hw/ & /system/lib/hw/ and also for me wifi wont work if i use updated kernel. so i extract wlan.ko from the modules and place it to /system/lib/modules/ ...
overall the build seems stable.
# I get 16.5 fps on neocore benchmark. (pretty decent i believe)
#However i am facing issues with wifi not able to get dhcp address (have to set static)
# google talk and gmail app aint working (force close). need to probably replace the apps. (not sure)
thanks neopeek.
vatoloco said:
Camera is broken
Click to expand...
Click to collapse
Means: Not working or really broken???
First post updated with V1.1
Broken means not working!
For those who got this release working .
can you upload the files that you had to modify (startup,tar.gz...) , so it would be a more easier process for non-experienced users to download this release and run it by one button ..
thanks in advance .
Where's the problem, huh? Move to npkinstall-folder. rename diamond.txt to startup.txt there! Start install.exe! After installation move to startups-folder and copy startup.txt from diamond where haret.exe is and simply run haret.exe! That's all! Sometimes I ask myself if someone misses reading my instructions. I think renaming 1 txt-file and copying 1 txt-file should be simple enough!
That's 2 steps!
Neopeek,
For blacstone users, need to replace the gralloc file in your builds to get the hw3d working. which if not done gives black screen and 3d is not enabled.
Neopeek,
For blacstone users, need to replace the gralloc file in your builds to get the hw3d working. which if not done gives black screen and 3d is not enabled.
Click to expand...
Click to collapse
...but boots up for you w/o that gralloc? So kindly link me to that gralloc so I can implement it. But first if it boots up just let me know if everything else works or something Blackstone-specific still needs a fix. Damn it! I have no Blackstone. SO I need you to test and give me hints!
I'm going to format to ext2 partition to try
Many thanks for the chance to get android on my blackstone man
I already downloaded the v1.1,but when I run the installer, the system show it will formate my ext2 partition,and then say cann't open xxxx.tar.gz,when show reboot in 7 seconds.But nothing happen after 7 seconds.
When I reboot manually,I found all of the android I in my card was gone,it empty because the sdcard already be formate during the installer running.I try two times the result is the same.
Fix already,It's my problem, I don't know why between the ext2 and fat32, there is 7.8MB no use, so after I repartition my sdcard, now is ok to install the file.
After waiting over 20 minutes, still black screen.
Neopeek,
For blacstone users, need to replace the gralloc file in your builds to get the hw3d working. which if not done gives black screen and 3d is not enabled.
Click to expand...
Click to collapse
I think I have to include this for you to get it working for you. On the other side you may try to set "hw3d.force=0" in startup.txt. Thanx indeed for testing!
Yes, after replace the gralloc.msm7k.so that from hw3d thread, now it boot ok. after boot the wifi is also no problem to get ip.
Please read this entire post!
<<<This is a link to the... FAQ Click it!!>>>
I have created a complete bundle of GingerBread with the newest kernel from GIT (Feb 28 / 1276), and the newest rootfs from GIT (Feb 24).
Please, feel free to DONATE to the XDAndroid project!
Every little bit helps!
Directions:
1. Download the full bundle (zip). (Updated Mar. 11 2011)
If instead you just want the system.ext2 (zip) file (updated Mar. 25 2011) by itself... Don't download this unless you know you want to update!!
2. Extract it. You’ll see a folder, GBX0A, copy its contents to the root (base) of your SD card. If you want to run Android from a folder instead of all the files on the root of the card, follow the steps below.
3. Go into the STARTUPS folder. Grab the appropriate startup.txt for your device (if you don't know what device you have, you should read the FAQ), and move it to the root of the card (or where you run haret.exe from. If you want to change the location of the build, put a rel_path= statement in the cmdline section of the startup.txt. Mine is located two folders deep on the SD, so my rel_path=Androids/TP2Ref)
4. Download the ts-calibration file from this post (should work for RHOD/TOPA) and extract the .zip to where you run haret.exe from - typically the root or 'base' folder of the SD card. Not within any folders, unless you run haret.exe from a folder!
**If you have issues with the above file, you must calibrate manually. To start manual calibration, just delete any ts-calibration files and boot. Sometimes this doesn't work, and you have to use an older kernel from GIT (I found 1225 works well) and generate the ts-calibration file by booting and pressing the 5 zones. Once you have a good calibration file hold on to it (make 15 copies if it's a really good one ), reboot & go back to the newest kernel from the autobuild service! Thanks**
6. Run haret.exe... Profit!
Let it settle out on the first boot. Many have reported they had to reboot basically because it was so slow - if you let it sit for about 10 mins or so the media scanner can go thru everything, etc. If you want adb in and watch the processes via top, you'll see why the phone seems so slow - there's lots of background processes cranking because this is the first boot .
Troubleshooting:
Please read the... FAQ
If you have any issues with the kernel, feel free to change it:
There are some devices that are having issues with the newest kernels. Please see the kernel autobuild service to get newer or archived kernels. Once you download a replacement kernel, go to where you run haret.exe from - remove your old zImage/modules-xxxxx.tar.gz. Take the new zImage/modules-xxxxx.tar.gz and replace the old ones, same folder - where you run haret.exe from. Make sure the ‘zImage’ is named just that. Do not rename the modules file, do not extract it - should be in .tar.gz format.
In addition, I am using the newest rootfs from GIT - Feb. 10. There are other rootfs options, see F22’s thread if you want to use more keys or move around the home button. Of course, there's always the roofs autobuild service if you want "stock" rootfs images - F22 builds his off of these and modifies them .
See Incremental Updates for more information on this topic of updating!!
Random issues can often be solved by forcing the system to create a new data.img. If you're worried about losing data, Titanium Backup works quite well. If you wish, you can rename the data.img to something else, and let the system create a new one - just to see if it resolves your problem.
Similarly, if you wish try formatting your SD card - I prefer to use the HP Tool - do a full format, FAT32.
Obviously this build is Alpha, and there are going to be problems. The next post will address issues particular to this build - PLEASE READ THESE before asking questions! Feel free to post questions in this thread, I will do my best to address them. Big thanks to stinebd for releasing the system image, and of course the other developers for their hard work on making these kernels available.
stinebd's original post HERE
Mar. 11 2011 Changelog
Things broken in this build:
libgps - explains itself, no GPS and probably no netloc (cell-tower based location). I think this also breaks the stock browser, I recommend using Dolphin Mini!
HW3D is either not working, or just not preset - I ran neocore and let's just say a lot of textures are missing. Got a ridiculous score, but again - no textures, not much to render haha.
Data - very flaky - CDMA users have data break for them after every phone call, and GSM users seem to have better luck but it's not flawless. Even seen reports of wifi having issues with data not going out to the WAN. There is a bug filed on this issue.
Anything that's broken in Froyo, is probably broken in this build. Although what is interesting, I noticed that in this build I don't have the landscape-on-boot issue that I get with Froyo...
Changelog March 25, 2011
Further tuned keyboard sizing to be useful on VGA (also made the key labels bigger)
World-phone settings support (very important for future RIL enhancements especially on CDMA)
Enabled HSPA icon (someone on GSM please let me know if it actually works)
Works good so far
Been using this for about 3 hours so far. Here's a little review. Upgraded through Stinebd's link in the XDAndroid thread (same as this I guess, but the arggggh's complete package includes all files needed). I deleted the data.img and replaced my system2 file. The first boot set itself up and then rebooted to winmo. The second boot worked. I was able to download Titanium backup from the market and restore my apps that I was using in Froyo. Overall it was working well. The default keyboard is tiny on my screen. My data connection is a little finicky as it was working when I restored my apps, but I could not connect after a while (same thing happened in my Froyo build periodically). As far as speed is good and bad, sometimes it's quick, other times it's quite slow. Overall, it's pretty good considering it was just released to us. Looking forward to future builds.
Edit: I reused my calibration file from Froyo. No issues
Rhod400, 2/10 Zimage and Rootfs from GIT
mmm, I may be blind but I can't see any download link! I'd like to test it and let you know!
anyway I already want to thank you for the hard work!
The system file was posted by stinebd in this thread:
http://forum.xda-developers.com/showthread.php?t=627997&page=1226
Thanks, I've included the original link to stinebd's post in my first post.
Still working out kinks, and stine will probably want me to host it on files.xdandroid.com - sorry for the delay... It will be here soon .
so this is the neopeek build only in an image?
husam666 said:
so this is the neopeek build only in an image?
Click to expand...
Click to collapse
This has nothing to do whatsoever with neopeek. This is AOSP code, modified to work on our phones. The system image work is done entirely by stinebd, and I have made a bundle - Link up!
arrrghhh any idea what the kernel incompatibility comes from? Thats strange...
edit- nvm I reread it a 5th time and understood heh
randomblame said:
arrrghhh any idea what the kernel incompatibility comes from? Thats strange...
Click to expand...
Click to collapse
You mean the calibration issue? Some commit broke it, not sure which one. There's rumors that we can read it from the spl, then we won't need a kernel-based calibration - we'll be able to do it in userland, which is really what we want especially going forward to NAND.
Gonna try this release this weekend
rhod100 does have the same panel problems as on a FRX04 release a guess?
JBS2 said:
Gonna try this release this weekend
rhod100 does have the same panel problems as on a FRX04 release a guess?
Click to expand...
Click to collapse
Panel problems are kernel related, not system image related.
What kernel do you run FRX04 on...? Thanks.
arrrghhh said:
Panel problems are kernel related, not system image related.
What kernel do you run FRX04 on...? Thanks.
Click to expand...
Click to collapse
Most recent from your testing topic.
Panel wakes up very slow normally or after touching the screen or power button multiple times.
JBS2 said:
Most recent from your testing topic.
Panel wakes up very slow normally or after touching the screen or power button multiple times.
Click to expand...
Click to collapse
Ah. Again, that's a testing kernel. Let's keep testing kernel discussion in that thread and build talk about this build in this thread... Thanks...
arrrghhh said:
Ah. Again, that's a testing kernel. Let's keep testing kernel discussion in that thread and build talk about this build in this thread... Thanks...
Click to expand...
Click to collapse
I know, you asked which kernel I was using
Just wondering if these release has something to do with the panel issues but I realize this is a kernel related problem.
Keep up the goog work, I'll keep testing the testing kernels to see if the known problem could be fixed
Okay, here's my 2cents:
BTW, i use rhod100.
Hardware3d doesn't work because the line is missing from the startup (as far as i am concerned, maybe you removed it on purpose).
steyn_e said:
Okay, here's my 2cents:
BTW, i use rhod100.
Hardware3d doesn't work because the line is missing from the startup (as far as i am concerned, maybe you removed it on purpose).
Click to expand...
Click to collapse
That entry is no longer required. Put it in and see... Thanks!
this is such an exciting build. It runs really fast. keep up the good work guys. Btw, to get a bigger gingerbread keyboard, search for "gingerbread Keyboard" in the market. its a larger sized version of the one that comes with the rom.
kdub94 said:
this is such an exciting build. It runs really fast. keep up the good work guys. Btw, to get a bigger gingerbread keyboard, search for "gingerbread Keyboard" in the market. its a larger sized version of the one that comes with the rom.
Click to expand...
Click to collapse
I've already included a fix in the second post, thanks!