Develop Bugs

[Q] Best thin case for Captivate

What is the best thinnest case for the samsung captivate!

Don't know what your parameter for "thin" is but I found the TPU cases from ebay to be the best. I had tried a BodyGlove case and a generic silicone case but found them too thick (the silicone case looked ugly too IMO - dull & attracted too much lint). The TPU case I got from ebay has been great - glossy yet grippy. Adds about a mm top & bottom.

I have tried three different cases and found that thr "Body Glove" seems to be the one I end up using the most. It is very thin, tight fitting and feels good while holding the phone. There are really several good choices around. This is of course IMHO.
Sent from my SAMSUNG-SGH-I897 using XDA App

i use the bodyglove case with the diagonal lines on the back. my brother uses the sedio one that snaps in 2 and has the smooth body. the body glove is a little thinner and looks more stylish. both are around 15-20 dollars. i prefer the body glove one because of the back actually, just adds a little touch to an otherwise plain looking phone. both are nice because they dont pick up dust and lint like the cheapo 2 dollar ones. you can tell quality by the seams of the rubber and smell. you get what you pay for. if your phone is worth 400, why spend 2 dollars on a case right?

fastkx450 said:
What is the best thinnest case for the samsung captivate!
Click to expand...
Click to collapse
How much protection are you wanting exactly?

Just picked up the Body Glove yesterday. Really like it, doesn't collect dust and very thin. Good fit also.

http://www.amazon.com/gp/product/B003VQS43U/ref=oss_product
Cheap, looks good (can't really see the pattern except at a certain angle), protects great, and is the thinnest protective case I've seen.

Check these out. They are not as sticky as regular silicone skins and they are fairly thin + cheap.
http://cgi.ebay.com/WHITE-TPU-CASE-...137991?pt=PDA_Accessories&hash=item3cb26715c7
http://cgi.ebay.com/SMOKE-Crystal-S...139274?pt=PDA_Accessories&hash=item5d2d4f700a
http://cgi.ebay.com/BLACK-TPU-SKIN-...791504?pt=PDA_Accessories&hash=item415455ec90
http://cgi.ebay.com/ORANGE-TPU-SKIN...810059?pt=PDA_Accessories&hash=item19c287018b
6 for 11$
http://cgi.ebay.com/6-x-Color-TPU-G...296126?pt=PDA_Accessories&hash=item3f06a32a3e
http://cgi.ebay.com/2x-Tpu-Gel-Case...544565?pt=PDA_Accessories&hash=item5ade97c375
http://cgi.ebay.com/Red-TPU-Crystal...340454?pt=PDA_Accessories&hash=item19c2cc2266

Body Glove is pretty darn thin. I have one but I replaced it with the Otterbox Commuter, just to change things up. Commuter is a bit thicker but I don't mind it at all so I am sticking with it. I do recommend the Body Glove though. Good sleeve.

Plus one for body glove.
Its perfect. Smooth enough that it comes out of pocket easy, but grippy enuff that I can throw it on dashboard without it flying off with the first turn I make.
I also think it looks great, fits perfectly, and I can hold the phone without dropping it-which is the reason I wanted it in the first place

are you looking for a hard case or skin? body glove or a tpu skin is your best bet for the thinnest protection but if you want a hard case then check out Seidio innocase surface

I just got a Xmatrix case (I think its a knock off as its not rubberized anywhere) but the fit is great and gives you a near naked feel. Covers the back and adds a bit to the front edge so the screen does not touch a flat surface if you lay it face down.

MobileNick said:
Don't know what your parameter for "thin" is but I found the TPU cases from ebay to be the best. I had tried a BodyGlove case and a generic silicone case but found them too thick (the silicone case looked ugly too IMO - dull & attracted too much lint). The TPU case I got from ebay has been great - glossy yet grippy. Adds about a mm top & bottom.
Click to expand...
Click to collapse
I just ordered one of these today, sounds like a good one.

Amzer argyle for $4
Sent from my GT-I9000 using XDA App

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290487171195&ssPageName=STRK:MEWNX:IT
I just ordered this case - its the slimmest/nicest looking imho, I am currently using the otterbox defender case - which i like, its a bit on the bulky side, but does offer excellent protection - my only real complaint with it is that its a pain to get the the battery if needed - have to take the rubber off, then separate the case and remove the phone from it to gain access to the back cover...

jgc121 said:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290487171195&ssPageName=STRK:MEWNX:IT
I just ordered this case - its the slimmest/nicest looking imho, I am currently using the otterbox defender case - which i like, its a bit on the bulky side, but does offer excellent protection - my only real complaint with it is that its a pain to get the the battery if needed - have to take the rubber off, then separate the case and remove the phone from it to gain access to the back cover...
Click to expand...
Click to collapse
Looks just like a TPU case which if you don't mind having a not as fancy case you can get the Amzer one on amazon for $5 shipped and the knockoff ones on ebay for about $3-4 shipped. But the case you linked to is one very nice looking case.

All nice looking cases. I may have to try the TPU out. Looks nice.
Sent from my SAMSUNG-SGH-I897 using XDA App

bay_wolf said:
http://www.amazon.com/gp/product/B003VQS43U/ref=oss_product
Cheap, looks good (can't really see the pattern except at a certain angle), protects great, and is the thinnest protective case I've seen.
Click to expand...
Click to collapse
+1
That Amzer case does it's job very well. It protects, looks good, thin and is subtle in a good way. The fact that it is now ~$6.00 makes it an absolute steal. I usually don't buy cheap stuff for my phone (or for anything for that matter) but this case performs like a $20 case.
Only issue I have with it is that mine seem to be less snug than it was when I first got it. I only take off my case when I have to do a battery pull so it's a bit surprising that it got loose so easily. I recently bought a Otterbox Commuter to replace this case because I was getting bored with it but I wouldn't say I changed because it was necessary; it was just cause I was bored and I found a good deal for it.

+1 for the xmatrix case. It's a hard case but very slim and is a good fit without any movement or shuffling. Plus, there is a minor lip on the front so you can rest it face down.
It snaps on in the back...just one piece.

Body glove for sure best slim streamline case
Sent from Serendipity 5.3 Captivate via XDA app

Best Protector Case for a captivate

Hi, i was wondering about which case buy and want to see your opinions about the best case for the cappy.
I've been watching the Trident Clyclops: http://www.cyclopscase.com/products/Trident-Cyclops-Protective-Case-for-Samsung-Captivate--Red.html
And also the otterbox http://www.otterbox.com/samsung-captivate-cases/samsung-captivate-cases,default,sc.html.
Seidio http://www.seidioonline.com/product-p/csk3sscap-rd.htm?
Body Glove http://www.bodyglovemobile.com/produ...and,219,19.htm

Otterbox Defender is amaxing
Sent from my Darky's ROM 10.2 EE Captivate using XDA App

I had issues getting to the four buttons with the Otterbox Defender. Nevertheless, in terms of protection, I trust them wholeheartedly.

Anyone has tested the Trident?

In addition to otterbox and cyclops look at the seidio active x.

this one http://www.seidioonline.com/product-p/csk3sscap-rd.htm? i like the desing

I just had my second Otterbox holster break. They replaced the first one without batting an eye. I haven't had a chance to call about #2, but frankly I'm not sure if I want to risk it. Fortunately the phone fell out while I was driving my car, not my motorcycle, but I'm not sure I want to risk it again.
So far it's the only case I've tried.

I hate to buck the trend, but I really like the cheap TPU eBay cases. I know, I know, some of us think you need to spend a lot to pamper your Cappy, but I do have my reasons.
They are cheap. I'm big on spending less than $5 for things.
TPU is a great blend of rigidity and pliability. I think silicone is a touch too soft to disperse impact energy, and hard plastic transmits the energy to the phone and often breaks in the process.
They are slick, but easy to hold. I carry my phone in my pocket. I think holsters look kinda dumb. TPU is generally very smooth and slides in and out of a pocket very nicely.
They are thin. Many of the hard molded cases turn your sexy-thin Captivate into a non-sexy blob, cool molded patterns notwithstanding. Lots of the silicone cases have kind of a shapeless look that I don't like.
I've been using a plain black TPU case for a while now, and I get lots of comments on how thin my phone is. I've also dropped it several times with no ill effect, except a less shiny spot on one corner of the cover. No complaints, and I really have a hard time imagining how the expensive ones are better.

TPU is nice and much, much better than silicone. I wish otter/seidio/trident would use TPU. I have a thin TPU case (body glove) and like it alot. Its just sometimes I want the thicker, two layered plastic and rubber case which is why I also have the seidio active.
The first case I bought was the pdair aluminum which would be a nice case but it kills the cellular signal so I can't recommend anyone buy it. Wifi works fine so if I ever travel somewhere I won't have service I plan on using it.

I like my Bodyglove case just fine. I've used it since the launch of the cappy and couldn't be happier. It's more rigid than silicone and less bulky than the otterbox. I've dropped my cappy numerous times on pavement, and as long as a jutting edge doesn't hit the screen it won't break. There is a slight lip on the front of the body glove that makes it so the screen doesn't hit when dropped on a flat surface.

asrrin29 said:
I like my Bodyglove case just fine. I've used it since the launch of the cappy and couldn't be happier. It's more rigid than silicone and less bulky than the otterbox. I've dropped my cappy numerous times on pavement, and as long as a jutting edge doesn't hit the screen it won't break. There is a slight lip on the front of the body glove that makes it so the screen doesn't hit when dropped on a flat surface.
Click to expand...
Click to collapse
This right? http://www.bodyglovemobile.com/prod...-glove-snap-on-case-with-clipstand,219,19.htm
Is like the otterbox impact, i guess.

I just bought today the body glove, found a great offer in ebay. I will post my opinion after test it.
Sent from my SAMSUNG-SGH-I897 using Tapatalk

I have the Otterbox Defender and I love it

I have an Otterbox Defender for my Captivate, but my Galaxy S 2 is naked. Need to find one for it.

I love my body glove, the phone is slim and easy to handle. I never droped yet but it feels really solid.
Sent from my SAMSUNG-SGH-I897 using Tapatalk

I have a generic silicone protector on my cappy, and fits so good on it, looks so pro.

NightHawk877 said:
I have an Otterbox Defender for my Captivate, but my Galaxy S 2 is naked. Need to find one for it.
Click to expand...
Click to collapse
Last I checked, Otterbox only has the Commuter for the S2, ATM.

Body Glove
I have bought like 5 cases for my cappy, the Otterbox, Body Glove, a slim hard plastic snap on case and a full hard snap on case.
In the end my 2 favorites are the Body Glove and the Slim snap on that snaps only on the back.
The otterbox case is nice, it is just too bulky. I use the Body Glove daily because it protects from impact, is not bulky and slides in and out of the pocket easy.
Moving forward I am all about the TPU cases.

I use this case http://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HK3SSCAP-BK
Look on ebay, I've seen these for $35. Dropped the phone twice and there's no damage on the phone at all.

I use the otterbox commuter with an invisible shield screen protector. I work with concrete and often get my phone cpvered with dust and grime. The case gets really dirty but when I remove it the phone is still perfect. I would take this case over the bulky defender version.
Sent from my SGH-I897 using XDA Premium App

[Review] Trident Kraken AMS on GSM Nexus

First of all, i would like to thank the people over at Trident (www.tridentcase.com) for sending this case out to me.
Packaging - The box is pretty simple. Shows the product and the different colors it comes in. Black, Red, Pink, Green, and Blue. i will be showing off the black model. Inside the box comes a screen protector kit, which includes the screen protector, microfiber cloth and a applicator/squeegee card. The case retails for $49.95.
Case - The Kraken AMS case is a heady duty 3-Layer case which features a shock absorbing silicone, a polycarbonate plastic shell, rubber dust covers over the microphone and speaker, rubber covers over ports (charger and headset), and holster. The silicone part, or Perseus can be used as a stand alone case on days that you don’t need maximum protection, but will still give u good drop and scratch protection. The two polycarbonate shells cover the silicone to make the case durable. The case has a nice lip around the screen for a lay on table design. One accessory that the case comes with is a really durable metal kickstand. They also have other Kraken accessories which make the case more usable in everyday life. such as an AMS Bike Clip, AMS Tripod Mount, AMS Headphone Organizer, AMS Seatbelt Clip, and AMS Windshield Mount.
Thoughts - My thought on the case are it is made of very high grade materials. everything fits. cutouts are precise. I’ve only had the case for a few hours and i love it. the silicone is way much better than the otterbox defender. it feels of quality and doesn't attract lint. the volume and power buttons feel better than the naked buttons to me. the kickstand is SOLID and does its job great. the holster is just as heavy duty as the case and rotates so you can wear it comfortably. i will update the in a few days to give more opinions...
Pics - I will have pics of the phone with the case tomorrow, as my nexus is my only camera at the moment.
http://imm.io/iJnX
http://imm.io/iJoQ
http://imm.io/iJpn
http://imm.io/iJpw
http://imm.io/iJpJ
http://imm.io/iJpR
http://imm.io/iJqe
http://imm.io/iJqn
Conclusion - I think the case is well worth the $50 you are paying. you are getting a heavy duty case that can be used as a lightweight case also that provides an ample amount of protection. I would definitely recommend this case to anyone who is looking for an overall great case that will add bulk to your device.
if u feel i left something out or want to ask a question. go ahead. thanks.

But will it blend? http://www.youtube.com/watch?v=lAl28d6tbko&feature=youtube_gdata_player
Seriosly though, If this fit a mugen 4000 battery id buy it. But so many premium cases none of them expandable
Sent from my Galaxy Nexus using Tapatalk

what do u mean by blend.?

rlamontjr said:
what do u mean by blend.?
Click to expand...
Click to collapse
Never seen the "Will It Blend?" videos?
http://www.youtube.com/user/Blendtec?feature=watch

Can't wait to see some pictures of the phone inside the case.
Some questions...
First, how do the two plastic pieces (the front and back) fit together?
On my otterbox defender, they just snap together with some tiny little clips and after about two drops 3 out of 4 clips are already broken so the only thing holding them together is the silicone cover that goes on the outside. I'm hoping the kraken is a lot more rugged in that aspect... The otterbox is great at protecting the phone but the case itself is already trashed after a few drops which isn't cool.
Second, how bulky is the kraken? It looks bulkier than the otterbox defender, especially on the sides since it looks like it has a ridge sticking out from either side of the screen. Does it feel good in the hand? My defender definitely makes the phone about 30% thicker which makes it less comfortable to hold but I've gotten used to it. Don't know how I'd feel about the ridges on the Kraken however.
Anyway thanks for the review.
Sent from my Galaxy Nexus using xda premium

hmmmm. might just scratch, but not blend.
the two plastic pieces fit together nice and tight. the top and bottom are snap together. but the sides are actually placed in slots, it can be slight difficult to remove if u don't have nails. but i see that as a good thing. the Kraken would take some time to show wear and tear.
it may b just a tad bit bulkier, but the grip is a for sure thing. the poly carbonate is not glossy but isn't matte. it's sort of in between but doesn't show finger prints. the sides have ridges for better grip as well. i actually thought the defender felt great in hand, maybe because i have small hands tho.
few more pics.
http://imm.io/iLsD
http://imm.io/iLsR
http://imm.io/iLsX

Has anyone tried one of these with the extended battery? Looking forward to pics of the phone in the case.

More Pics...
http://imm.io/iWzQ
http://imm.io/iWzZ
http://imm.io/iWAd
http://imm.io/iWAn
http://imm.io/iWAz
http://imm.io/iWAI
http://imm.io/iWAR
http://imm.io/iWAY
http://imm.io/iWBl
http://imm.io/iWBF
the case fits the GSM extended battery with no problems at all.

Does this case make it hard to press the volume and power buttons? And it seems to cover up the notification light at the bottom doesn't it?

the buttons are the best thing on the case IMO. and the notification light isnt covered.

rlamontjr said:
the buttons are the best thing on the case IMO. and the notification light isnt covered.
Click to expand...
Click to collapse
Thank you! I will probably be ordering the phone, this case and the 2000 mAh battery all today then

Ngo93 said:
Thank you! I will probably be ordering the phone, this case and the 2000 mAh battery all today then
Click to expand...
Click to collapse
HI, just wondering if you wound up getting the 2000mah battery afterall and if so, how well it fits.

if it fits 100 percent with extended battery im a get one to

i recently bought one it appears the notification light is 40% block.. i'm using the standard battery gsm version could that be the reason i wonder

I have the same case with the extended battery (Sprint) and everything fits perfectly. The notification light is about 50% blocked but I dont use it anyways so it did not bother me much. The notification bar is easy to pull down with no interference with the top of the case like with the otterbox. The case can take a beating I have drop tested survived a 12ft drop. Even though it adds bulk because it is hard polycarbonate on the outside it makes it really easy to get in and out of pockets even with tighter fitting jeans.
Also if you have a Costco or Sams Club near by you can pick up the case for $30 instead of $50.

Seidio convert is better.. options for all gnex models and batteries
Sent from my Full AOSP on Toro-VZW using xda app-developers app

After a couple of months, do you guys still recommend the Kraken?
saintpanache

saintpanache said:
After a couple of months, do you guys still recommend the Kraken?
saintpanache
Click to expand...
Click to collapse
I would recommend it if you are looking for a case that offers similar or even more protection than the Otterbox Defender. The case adds quite a bit of bulk to your phone though so that may turn off some people.
Throughout the work week, usually switch between the Kraken, Otterbox Commuter, and the SGP leather pouch. The Kraken will be used only if I have to go out to do field work.
The Commuter is only used if I feel like I don't want to use the SGP pouch. Otherwise I end up using the SGP pouch most of the time on the slower days of work where I'm just stuck in the office.

I'm leaning toward the Kraken because I've read a couple of story about how the Otterbox defender was scratching phones.
I have a commuter right now but I need something more rugged for work and also to protect my GNex from my crazy kids
saintpanache

If that's the case, the Kraken would be a good purchase for you. My Kraken case has held up well when I drop my phone when I'm out doing field work. Very durable and well worth it!

[Q] Casemate Tough size vs Trident Aegis

Hey guys, I've been searching around and I can't find a definite answer. How much thicker is the Aegis compare to the Tough? I know the CM Tough doesn't cover the ports while the Aegis does. I have the TPU S, Casemate Pop, as well as the Bodyglove kickstand case currently.

aegis
Ive been running trident aegis for 5 months now. Its flat out amazing! It has flip open covers for usb and 3.5mm head phone jack. the phone is 150% protected. I have 4 batteries and 2 wall chargers so i remove the case daily for 5 months now and its still 99.9% new. Worth the money plus its tough and looks amazing

I actually just switched from the Aegis and went with the Casemate Tough Case. The Aegis, although a great case, was bugging me with it's thickness, super rubbery grip (hard to put into and pull from pockets), and the port covers irritated me too.
The Casemate has awesome grip without being sticky like the Aegis, it's definitely thinner and it feels SOOO much better in my hands. I'm pretty sure I'll be sticking with the Casemate for a long time.
maybe Ill sell the Aegis

Im using the aegis and the rubber isnt sticky. I like it but it does make the phone a bit thicker
Sent from my SPH-D710 using XDA

I've used both the casemate and aegis extensively, and I'd have to say the casemate feels nicer and more premium overall. It offers the same protection with a slimmer profile.
However, the reason I got the aegis in the first place was because I got bored of the lack of color on the casemate.
At the moment, I'm using my basic TPU matte back black because it seems to be enough protection for work and I slip the casemate on when I head for the outdoors.
If you are into winter sports like snowboarding, I would get the aegis, because I lost my phone on the slope once and looking for a black case was challenging to say the least. The bright blue/red of the aegis would stand out easily against the snow.
Sent from my Blu Kuban'd Galaxy S II.

I just ordered a casemate tough to replace my aegis so I will get pics up later thsi week if you are still deciding. I love the Trident case but lately it has been turning the phone off in my pocket. Apparently the power button works too good so a bit of pressure from normal activities is holding it down and turning off the phone.

Also, the Casemate Tough Case is $35 on their site. On Amazon brand new it's $18. BUT, I bought mine "open box" with a "like New" rating for $8 on Amazon! Those cheapy flexible TPU cases are more expensive than that.
It got shipped to me in it's original packaging and in brand new, flawless condition.

someguyatx said:
I just ordered a casemate tough to replace my aegis so I will get pics up later thsi week if you are still deciding. I love the Trident case but lately it has been turning the phone off in my pocket. Apparently the power button works too good so a bit of pressure from normal activities is holding it down and turning off the phone.
Click to expand...
Click to collapse
That would be great, thank you!
Sent from my SPH-D710 using xda premium

Cool casemate should be in tomorrow, I have tpu cases as well so I will take a few shots of all 3 together.

Case just came in and here are some side by side pics
Left to right trident aegis, casemate, tpu case
The casemate is basically right between the size of both cases. The main differences between it and trident is that the ports are not covered. Also the corners are hard plastic on casemate and soft rubber on Trident.

Specs
Threw in "penny factor" for reference... (b/c not everybody carries a caliper and scale in their back pocket )
Penny thickness: 3.5mm
Penny weight: 0.1oz
Phone weighs 4.6oz naked.
Notes:
Aegis is a little wider towards the top where the buttons are - 79.50mm
Corner protection - Aegis is thicker and is all rubber; Tough Case is thinner and a combination of plastic over rubber. The Aegis design relies on the thick rubber corners to absorb the shock whereas the Tough case relies on the shell distributing the load on the thinner rubber. Hard to tell which is better for corner drops (which is usually how/when screens are most likely to shatter - load concentrated over a small area) without some destructive testing. I can say that I've dropped the phone several time on hard warehouse floors from chest height with the Aegis with no issues.
Overall Protection - IMO, the Aegis provides a better overall protection due to the thicker rubber (at the corners as well as overall), hard case wrapping over the top and bottom (unlike the Tough Case) and port protection.
Screen protection ("lift") on the Tough Case is slighter higher.
Tough Case is much easier to get in and out of pocket.
Buttons on the Tough Case are flush; On the Aegis, the buttons protrude a little causing accidental power-ons.
Final thoughts:
Was using Aegis as my daily but am switching to Tough Case due to smaller size, lighter weight and ease of getting in and out of the pocket. Will keep Aegis for the weekend outdoor excursions. Both are quality cases.

quocamole said:
Final thoughts:
Was using Aegis as my daily but am switching to Tough Case due to smaller size, lighter weight and ease of getting in and out of the pocket. Will keep Aegis for the weekend outdoor excursions. Both are quality cases.
Click to expand...
Click to collapse
Exactly the reason I just bought casemate. Also the power button on the Aegis stuck out farther and my pocket was turning off phone or waking it up with certain lockscreens.

I can't decide... (yep another case thread)

I wanted a as slim as possible case and I wanted it to protect all the way around the perimeter of the phone. Here are the choices (in order from first to last), help me decide.
Rearth Ringke Slim - At $28 it's a bit expensive and it doesn't cover the sides. Also looks to be less grippy since it's hard smooth plastic.
BoxWave Blackout - I'm worried it's thicker than a case like the Rearth, but with that said it protects all around and is really cheap at $12. I think the material is more rubber like which sounds more appealing to a gloss hard case. Not many reviews anywhere for this case.
elago G4elago G4 - I'm not sure about this case in general.
Thanks for your input.

Personally I like the Leather style flip cases, The one that doubles up as a wallet.
http://www.ebay.co.uk/itm/BLACK-WAL..._MobilePhonesCasesPouches&hash=item3374db7913
I would never pay more than £10 (delivered) for a case.

in terms of slimness i've basically narrowed it down to two giants.
1. sgp ultra thin
2. casemate barely there.
not sure which ones better but from what i can tell they're pretty much the same, both at a hefty 25 bucks.
anyways, i'm in the same boat as you. XD
not sure which case to get.

vipfreak said:
I wanted a as slim as possible case and I wanted it to protect all the way around the perimeter of the phone. Here are the choices (in order from first to last), help me decide.
Rearth Ringke Slim - At $28 it's a bit expensive and it doesn't cover the sides. Also looks to be less grippy since it's hard smooth plastic.
BoxWave Blackout - I'm worried it's thicker than a case like the Rearth, but with that said it protects all around and is really cheap at $12. I think the material is more rubber like which sounds more appealing to a gloss hard case. Not many reviews anywhere for this case.
elago G4elago G4 - I'm not sure about this case in general.
Thanks for your input.
Click to expand...
Click to collapse
I have the rearth and it is very slim, the only down side it is a beeeoootch to take off (i have a dock/charger for the phone) and if you take it on and off a lot it cracks and the part closet to the usb port cover, nothing earth shattering it actually makes it much easier to take the case off - that and the sgp ultra clear and it is almost like having nothing on the phone at all.

I have used diztronic cases for the last year (for my SII and now my N7000). They are very similar to the boxweave case you posted.
http://www.amazon.com/Diztronic-Fle...0386413&sr=8-3&keywords=diztronic+galaxy+note
As you know TPU protects like a silicon case but doesn't stick in your pocket or collect lint and dust due to it not being "sticky" feeling. I recently sold my SII for over $300 after 8 months of daily use because my SII was in perfect condition as a result of being in a diztronic tpu case. No, I never dropped the phone on cement or anything but I dropped my SII on the carpet from 5+ feet and the phone was unchanged when I picked it up. Didn't pop out of case or battery, etc. Because the tpu cases have a 1/8 or so "lip" on the front they also allow the phone to be placed face down on flat surfaces. IMHO and experience, a good tpu case is all you need to fully protect your phone unless you work in construction or somehow expect to drop it on cement.
So, my vote goes to the boxweave or diztronic cases. BTW I got 2 diztronics for $14 from amazon, the black matte and smoke matte. Great deal!

^I'm actually thinking of getting a real cheap TPU case like that I can mod. My ideal case is a TPU Bumper, maybe the Boxwave Black out without the back part but have the vol and power buttons cut out. I guess it's just not feasible so far... ?
Anyway, Thanks for the input so far guys, keep it coming.

bumper TPU from Amazon
I'm actually thinking of getting a real cheap TPU case like that I can mod. My ideal case is a TPU Bumper, maybe the Boxwave Black out without the back part but have the vol and power buttons cut out. I guess it's just not feasible so far... ?
first post here,
I have one of these.
search amazon for bumper cases.
I'm not allowed to post urls.
I like it, I have it on right now. What I have is different from what's
in the pictures. No cutouts for the buttons and the other cutouts are not
as big. The covers of the buttons are pretty sensitive, unlike the covers
for the Boxwave type which I got from Hongkong for 2 bucks.
Check amazon out, they have a lot of cases.
I also have the elago Breathe case, I love them I have two.

I ended up taking my chances on this. I guess it's going to be as close as I get. Thanks everyone, I'll let you know how it is when I get it.

vipfreak said:
I wanted a as slim as possible case and I wanted it to protect all the way around the perimeter of the phone. Here are the choices (in order from first to last), help me decide.
Rearth Ringke Slim - At $28 it's a bit expensive and it doesn't cover the sides. Also looks to be less grippy since it's hard smooth plastic.
BoxWave Blackout - I'm worried it's thicker than a case like the Rearth, but with that said it protects all around and is really cheap at $12. I think the material is more rubber like which sounds more appealing to a gloss hard case. Not many reviews anywhere for this case.
elago G4elago G4 - I'm not sure about this case in general.
Thanks for your input.
Click to expand...
Click to collapse
I have the 3 of them
Go for the Rearth Ringke Slim , is THE BEST OF ALL !!!

Hi all, I'm in a similar dilemma.
I've got a choice between these two:
https://www.gearzap.com/media/catalog/product/3/4/34484-2.jpg
and
http://www.ebay.co.uk/itm/HYBRID-SI...lePhonesCasesPouches&var=&hash=item416682f7b6
I know I should pick the Zenus, but would the inside bit that holds my phone scratch the outer bezel? And since the hybrid one has a silicon case THEN a hard outer shell I figured it would be good too. Any ideas?
Thanks!

I use a an SGP Ultra thin. Comfortable case. Considering the size of the phone the case is great. Merges with the Phone. +1 anytime.

I ordered this one http://www.ebay.co.uk/itm/160732471512?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649. It has a stand that works in both axis.

good
Nice