There's no G-Slate forum yet, so this goes here.
How to root your T-Mobile G-Slate
This process works under Linux. The hard part under Windows would be mounting a file as an ext4 filesystem, but if you can do that you win.
You need:
The four files in the gslate_root.zip archive attached to this post.
To root:
Put those four files in a directory and open a terminal to there.
Shut down your G-Slate and plug it into your computer via USB.
Hold down both volume buttons and press the power button. The G-Slate will not appear to turn on, but it'll go into APX mode.
Running "lsusb" should show an entry "0955:7820 NVidia Corp."
Run the command "sudo su" to get a root shell. Running "ls" should still show the four files.
./nvflash --bl bootloader.bin --getpartitiontable ptable.txt
./nvflash -r --read 8 system-orig.img
Wait while 400 meg of data copies.
cp system-orig.img system.img
mkdir system
mount -o loop system.img system
cp su system/bin
chmod 4755 system/bin/su
cp Superuser.apk system/app
umount system
./nvflash -r --download 8 system.img
Wait while it copies back.
./nvflash -r --sync
Press the reset button under the sim cover to reboot.
There's your rooted G-Slate. Making that process "one click" is going to suck.
Troubleshooting:
You may need to install the package libstdc++6 or lib32stdc++6 to get nvflash to run.
You may need to use "sudo" on the nvflash commands.
If you want to try to make this work on Windows, the nvflash.exe binary and the APX USB drivers are are available from nvidia.com
This is unbelievable! Can't wait to give it a shot.
EDIT: For future reference, DO NOT use Virtual Box to try and root your device. There are issues getting the drivers to work properly. Lsusb will not work. The following methods have been tested and work:
1. Wubi install of Ubuntu Linux
2. VMware install of Ubuntu Linux
3. Dual-boot install of ""
4. Dedicated Linux box (duh)
And remember: If at first you don't succeed, try try again. Then visit our IRC channel.
Trying this on Windows 7 is gonna be a trip. Never workt with ext4 before.
Install Ubuntu and you can dual boot into Windows or Ubuntu. That's what I do.
Sent from my LG-V909 using XDA Premium App
This method is confirmed working. Thank you so much for the hard work Chandon. It wasn't very hard to complete on Linux. I can't believe my G-Slate is rooted!!!! Hell yes! Oh and the device is not wiped during the process either just to let everyone know!
Some More Help
Would it be possible to pull the recovery partition off now?
Why I ask. I am in a bit of a pickle. My slate will get to the first LG boot screen and then freeze. It does not even go to the boot animation. I can still get into fastboot and APX mode and it is seen by my computer.
How did i get here. While poking around in fastboot I am pretty sure i wiped they recovery partition D'OH.
I was able to complete the steps listed (for root) with out issue but still cannot get past the boot screen since this is only modifying the system partition.
I am thinking that if that could be pulled from the device i could flash it to mine and bring my slate back to life?
Am I way off on this one?
SmellyTunic -
Attached are all the reasonably small partitions that I could pull off my device with nvflash. This should be everything except /system, /cache, and /data.
I suggest backing everything up before flashing any of these, on the off chance that there's some difference between devices.
Thanks so much for this! Is there a good linux live cd(or bootable usb flash drive) someone could suggest where this could be accomplished easily? Not ready to take the plunge actually installing linux on my system yet >.>
Here you go
shinkinrui
Info and steps can be found here http://www.ubuntu.com/download
Pretty easy to set up a dual boot machine.
Chandon,
Any chance you know off hand which one of those partitions is the recovery?
I suggest doing a Wubi install [1], where Ubuntu pretends to be a Windows app (which you can then uninstall like any other app later). Alternatively you could try using VirtualBox [2], but that's less guaranteed to work.
The only reason I wouldn't do this with a Live CD is that you'd risk losing your backup of the stock /system partition when you reboot. It would also make losing power in the middle of the flash really annoying.
[1] https://wiki.ubuntu.com/WubiGuide
[2] (edit: virtual box doesn't easily see the USB device)
Thanks guys, reading about that Wubi solution looks like the simplest way to have a dual-boot system. I like it! I'll be getting my root on later tonight
i prefer Ubuntu just cause you can install it in windows then simply restart and boot into Linux or Windows. This way you don't need to worry about not having Linux again.
SmellyTunic said:
Any chance you know off hand which one of those partitions is the recovery?
Click to expand...
Click to collapse
I'm sure that /system is 8 and the kernel is 13, but don't know about anything else. You might be able to figure it out by reading the ptable.txt file generated by the --getpartitiontable command - it's pretty clear except for the part where it uses 3 letter partition names.
Thanks. I will take a look when i get home from work.
Sent from my GT-I9000 using XDA App
While we are on the topic of development, we really need a forum over here at XDA for the G-Slate!
deez1234 said:
While we are on the topic of development, we really need a forum over here at XDA for the G-Slate!
Click to expand...
Click to collapse
I definitely concur.
thengkiu so much
works like a charm
I have no idea why I'd ever need/want to root my G Slate, I'm fairly simple in my desires for my device - but I have to say I'm delighted to see it is possible and am ever so grateful for folks who figure this stuff out because it keeps moving G Slate towards legitimacy.
Thank you!!
The hard part under Windows would be mounting a file as an ext4 filesystem, but if you can do that you win.
Click to expand...
Click to collapse
No kidding. Since the linux method failed miserably for me, I've decided to press forward with trying to do it on Windows. Problem is, I have yet to find any way to mount an ext4 filesystem on Windows. There are several options out there that will allow you to read ext4 filesystems on Windows, but not write. Any suggestions?
my friend will be happy to see that this is possible.
Related
Root from Paul didn't come with one, and seeing as we can't get full system access (from what i understand) im curious as to if we can actually get busybox?
The 'busybox on rooted desire' on MoDaCo didn't help at all.
I've installed bb via Titanium, yet Metamorph didn't recognise it anywhere.
Cheers in advance for help
It comes with A2SD - but you can push the busybox binary to /system while the phone is in recovery.
If you pushed bb yourself, use its absolute path (like /data/somewhere/busybox) or put its path in your $PATH to get it going. I personally, without root, put busybox in the free-to-write-to /sqlite* directory (I put * because I don't recall the full name) and it runs fine from there.
do you have a link to apps2sd & does it come with a guide as to how to install it so noobs can understand?
A2SD was taken down "temporarily".
http://android.modaco.com/content/h...ide-now-with-new-improved-easier-root-method/
Sorry
Although this still seems to work:
http://android.modaco.com/content/htc-desire-desire-modaco-com/307398/apps2sd-miniguide/
LeszekSwirski said:
Although this still seems to work:
http://android.modaco.com/content/htc-desire-desire-modaco-com/307398/apps2sd-miniguide/
Click to expand...
Click to collapse
Bare in mind I think it was taken down as (for some) it 'removed root' and also got some phones stuck in a reboot loop. Bad times.
GANJDROID said:
Root from Paul didn't come with one, and seeing as we can't get full system access (from what i understand) im curious as to if we can actually get busybox?
The 'busybox on rooted desire' on MoDaCo didn't help at all.
I've installed bb via Titanium, yet Metamorph didn't recognise it anywhere.
Cheers in advance for help
Click to expand...
Click to collapse
You didn't read to the end of that thread
* install Titanium
* run Titanium
* click the "problems" button and install Busybox
* boot into recovery
* adb shell from my Mac
* mount /system
* cp /data/data/com.keramidas.TitaniumBackup/files/busybox /system/bin
* cd /system/bin
* ./busybox --install -s .
Click to expand...
Click to collapse
By what I've read, though, Metamorph dies on its arse because of the lack of system rw access.
Loccy said:
You didn't read to the end of that thread
Click to expand...
Click to collapse
Aye, I read that, but no Mac, and I can't get to the folder where Titanium saved bb to (assuming that because it's not on the sd card in any data or the titanium folders) the phone system(?)
jayshah said:
Bare in mind I think it was taken down as (for some) it 'removed root' and also got some phones stuck in a reboot loop. Bad times.
Click to expand...
Click to collapse
Had heard about that, but I think he may be working for a solution?
From what I can remember from the rooting guide he said it was 'currently unavailable'
GANJDROID said:
Had heard about that, but I think he may be working for a solution?
From what I can remember from the rooting guide he said it was 'currently unavailable'
Click to expand...
Click to collapse
Yeah, hence it's hopefully only temporary.
GANJDROID said:
Aye, I read that, but no Mac, and I can't get to the folder where Titanium saved bb to (assuming that because it's not on the sd card in any data or the titanium folders) the phone system(?)
Click to expand...
Click to collapse
Install Titanium. Then get your phone into recovery using Paul's Linux ISO. In the Linux console (i.e. where you'll have typed ./step2.sh to get the recovery up), you should be able to do adb shell from there. Then follow my instructions from mount /system onwards.
I didn't follow Pauls guide as I only have access to Windows, so I used the lanarchy guide, which I think might have been taken from The Unlockr.
Maybe fill me in w/ bb according to that?
i am a bit ashamed to ask this but:
....
* boot into recovery
* adb shell from my Mac
* mount /system
....
boot into recovery -> ok
adb shell from mac.. ok? hm, i have macos as a seperate installation and i used it for rooting, so there is a pushfiles folder with recovery-mac.sh.. sudo ./recovery-mac.sh?
How do i mount /system then? Don't know where to navigate to find access to the sdcard . @volumes there are only my harddrive partitions, can't see the sdcard?
No idea, sorry, first time (ok, second time after root) i get in touch with adb, mac, sudo wtf?
Ok, all you need is some kind of environment where adb actually works.
Get your phone into recovery (the green menu screen) using whatever means or method you have.
Then, if you have Windows, you'll need the Android SDK. Ditto on a Mac. Anything with adb so that you can plug your device into your computer, do adb shell, and get a shell window up. Then
mount /system
onwards.
The key is that your phone needs to be in recovery before you do adb shell, otherwise you have no r/w access to /system.
ah! ok, perfect. The android sdk is on my windows computer, the push-files on my mac, that's the problem
thanks for your help!
the recovery is not the problem, but mount /system did nothing because there is no android sdk on my mac.. got it now i think.
mount system -> ok
copy busybok -> ok
when i try to install i get dozens of lines with "no such file or directory".
reboot -> phone not booting, hangs when displaying the HTC Logo omg
flash rom again?
same problem as watercool. Loads of "No such file or directory" messages.
But, I rebooted and it went through as normal, booted the OS fine.
hm, dont want to wipe again, pff..
flashed AhmgskMod mod again without wiping, everything ok now
watercool said:
mount system -> ok
copy busybok -> ok
when i try to install i get dozens of lines with "no such file or directory".
reboot -> phone not booting, hangs when displaying the HTC Logo omg
flash rom again?
Click to expand...
Click to collapse
Sounds like you missed the . off of the end of the
./busybox --install -s .
command.
You need that . if you're following my instructions.
ok, i did it with and without the "."
With the dot there was no response (so probably it installed correctly?).
Anyway it didn't boot afterwards. i will try it again
edit: ok, tried again and my phone stucks @ htc screen
i think busybox is installed but for some reason it doesn't boot (using the ahmgsk mod)
anyway, thanks for your kind help!
Anyone seen this yet?
This guy got Ubuntu to run on his nexus one, is it also possible on our Desire?
http://nexusonehacks.net/nexus-one-hacks/how-to-install-ubuntu-on-your-nexus-oneandroid/
It's a chroot. I don't know if it's me, but this isn't fascinating since Debian could be chrooted already (right?) - its the native boot we really want. This still runs the Android kernel.
-
I think it would be very facinating.. Android kernel running or not, I'd still be happy to be able to have a full worthy Ubuntu desktop enviroment to play around in. Think of all the apps you can then run! Millions!
But this is an ubuntu x11 session opened via VNC!! this isn't ubuntu on android!
Why would you need ubuntu on a phone? I don't get it...
Can't you just buy a netbook?
Why not just try to use the guide for N1? It should work I think... will try when I have some spare time.
I thought using the N1 guide would work, but i kept getting "bootubuntu not found" (or something similar) when trying to launch bootubuntu. Also I thought Ubuntu would be running on the phone itself, using vnc to access X11, in effect giving the more or less full Linux experience from the phone alone, or have I misunderstood?
N1 guide doesn't work
The N1 guide doesn't work on the Desire because the ubuntu.sh trys to install files onto the devices system partition. But this fails because we don't have write permission to the system partition unless the device is in recovery. I booted into recovery, mounted the /system partition & pushed the files to /system/bin using adb. I then changed the files permission using. I can now run bootubuntu but it fails, I think it's trying to mount ubuntu.img somewhere on the system partition. I think the bootubuntu script needs edited but i hav en't had a chance to do it yet.
You can mount on the system partition regardless of write permissions.
If this is the same as the debian one the mount point is /data/local/mnt
/
Unable to install ubuntu on the G2 i get an error when i run the ubuntu.sh and bootubuntu commands , see attached . i got the files from http://nexusonehacks.net/nexus-one-hacks/how-to-install-ubuntu-on-your-nexus-oneandroid/
Please help !!! Also i am running this rom ROM] (ext3-sdcard-based) - StockG2 (optional Manup456 Themed) - v1.1 - 10/14/2010 .
UPDATE I was able to get the following method to work on my root G2 running the desire z rom . http://forum.xda-developers.com/showthread.php?t=836022 .
*bump*
Id actually really like to see this able to be accomplished
I have Debian working perfectly in a chroot. I'll give Ubuntu a shot this weekend.
keenerb said:
I have Debian working perfectly in a chroot. I'll give Ubuntu a shot this weekend.
Click to expand...
Click to collapse
What steps did you follow to get debian to work ? It shout be the same process just sub out the debian image for the ubuntu image . Are you running the enomther themed rom off the sdcard? do you have the instructions in a step by step format i could try ? Thanks in advance i was able to get this running on the mytouch slide but no luck on the G2 , i think i just need an updated install.sh or ubuntu.sh script to write to the corect paths .
bled82 said:
What steps did you follow to get debian to work ? It shout be the same process just sub out the debian image for the ubuntu image . Are you running the enomther themed rom off the sdcard? do you have the instructions in a step by step format i could try ? Thanks in advance i was able to get this running on the mytouch slide but no luck on the G2 , i think i just need an updated install.sh or ubuntu.sh script to write to the corect paths .
Click to expand...
Click to collapse
My method used actual linux partitions.
http://forum.xda-developers.com/showthread.php?t=811765
It was based on my Cliq Ubuntu chroot here:
http://modmymobile.com/forums/403-m...ent/526845-successful-debian-chroot-cliq.html
The Cliq chroot guide worked perfectly except the filesystem for /system is EXT3 now instead of yaff2, and the partition numbers have changed.
mount -o rw,remount -t yaffs2 /dev/block/mtdblock1 /system
Needs to be
mount -o rw,remount -t ext3 /dev/mmcblk0p25 /system
And
mount -t ext2 -o noatime /dev/block/vold/179:2 /system/debian
Needs to be
mount -t ext2 -o noatime /dev/block/vold/179:34 /system/debian
Everything else should pretty much be identical.
You may want to substitute /data/debian for /system/debian, since /system gets wiped every reboot.
If you used the parallel SD-card based rom that enom posted the debian block device might be 179:35 or 179:36, depending on whether you added one or two partitions for that rom.
keenerb said:
My method used actual linux partitions.
http://forum.xda-developers.com/showthread.php?t=811765
It was based on my Cliq Ubuntu chroot here:
http://modmymobile.com/forums/403-m...ent/526845-successful-debian-chroot-cliq.html
The Cliq chroot guide worked perfectly except the filesystem for /system is EXT3 now instead of yaff2, and the partition numbers have changed.
mount -o rw,remount -t yaffs2 /dev/block/mtdblock1 /system
Needs to be
mount -o rw,remount -t ext3 /dev/mmcblk0p25 /system
And
mount -t ext2 -o noatime /dev/block/vold/179:2 /system/debian
Needs to be
mount -t ext2 -o noatime /dev/block/vold/179:34 /system/debian
Everything else should pretty much be identical.
You may want to substitute /data/debian for /system/debian, since /system gets wiped every reboot.
If you used the parallel SD-card based rom that enom posted the debian block device might be 179:35 or 179:36, depending on whether you added one or two partitions for that rom.
Click to expand...
Click to collapse
Cool thanks i bet the partion was what was hanging my up ill try it later and let you know
Since im running the rom of the sdcard i would need to place my img on the ext3 correct ? in which cause i guess placing it in the system folder should work then ? Just wondering if i can get it on my ext partition without running linux , they switched out my work pc and i dont have time to setup a vm right now .
Quick question.
Dont bash me please
What is the point of doing this? other then the fact of being able to do it?
keenerb said:
I have Debian working perfectly in a chroot. I'll give Ubuntu a shot this weekend.
Click to expand...
Click to collapse
Hey just wondering if you gave this a try over the weekend i was away from my pc all weekend so i did not try any thing .
Has anyone been successful in getting the n1 method to work on the g2, it doesn't look like anything propitory to the N1 is done....think ima give it a go tomorrow
i was able to get debian to natively install on my g1, being g1 is very slow compared to the processing power the g2 can give out i might give this a go and see how well it will run along side with android. if i remember correctly g1 was very slow running along side android like this hope g2 would be way much better.
native debian g1
hXXp://novaspirit.com/blog/?p=6
i will give this a go for the g2 =)
p.s. replace hxxp with http
This is as far as I got...I'm thinking its because the fs isn't ext2?
Not sure, ima try playing with the script and see what I can come up with.
Curently runin CM 6.1.0-RC2
Sent from my two cans and a peice of string.
This is what happenes with the 'updated' bootubuntu script :/
Sent from my two cans and a peice of string.
This worked for me, but a) I can't figure out how to right-click in VNC, b) it starts and runs as root, c) why is it Karmic? Is there something wrong with Ubuntu Maverick under ARM? d) can I expand the size of the .img loop-file so that I can install more stuff?
EDIT: BTW, I fixed the above problem that MrOtsKrad was having by doing "sh bootlinux" at the command line instead of just "bootlinux." Or bootubuntu, whatever it was
Is there a way to get this working natively? Booting ubuntu/debian on the G2 without booting into android first? I tried building a boot.img, but I just end up in reboot loop after the white HTC screen and I haven't been able to debug anything yet.
bdogg64 said:
Is there a way to get this working natively? Booting ubuntu/debian on the G2 without booting into android first? I tried building a boot.img, but I just end up in reboot loop after the white HTC screen and I haven't been able to debug anything yet.
Click to expand...
Click to collapse
I get the impression that is a SERIOUSLY non-trivial project, hence the reason we haven't seen (for example) MeeGo ported yet.
So, I figured out a, above: just hold the camera button while tapping. Still don't know how to not be root. Haven't tried an upgrade to Maverick yet mostly because the loopimg only has 111MB (roughly) free.
starkruzr said:
This worked for me, but a) I can't figure out how to right-click in VNC, b) it starts and runs as root, c) why is it Karmic? Is there something wrong with Ubuntu Maverick under ARM? d) can I expand the size of the .img loop-file so that I can install more stuff?
EDIT: BTW, I fixed the above problem that MrOtsKrad was having by doing "sh bootlinux" at the command line instead of just "bootlinux." Or bootubuntu, whatever it was
Click to expand...
Click to collapse
Yes you can change the img size . You can follow the instructions here that where made for the debian image on the g1 . http://www.androidfanatic.com/community-forums.html?func=view&catid=9&id=1610
Can someone post step-by-step instructions to get Ubuntu Maverick working? I tried getting Debian to work on my G1 a while ago and it always rebooted my phone.
I get nothing when I do "sh ./ubuntu.sh" (and it IS there, I checked by doing ls)
And of course if I try "sh bootubuntu" after that, I won't get results.
What rom are you trying this on ? When i did this i was on either stock or one of the very first roms . if you can provide the rom i can flash it and test and see what the issue is .
Root Galaxy Nexus (Either GSM or LTE) in Linux (Personally in Ubuntu)
Disclaimer: I am not at fault for anything you have done to your phone (ie. Brick, break, etc.). You are doing this at your own discression. I am merely stating what I did to unlock/root my phone.
Tutorial Broken Down Into Three Sections
I. Unlocking the bootloader
II. Installing Clockwork Mod Recovery
III. Installing SuperUser
Resources
1. Super User (used by flashing in Clockwork): http://download.clockworkmod.com/test/su.zip
You can get the latest version here: SuperUser by ChainsDD
2. Clockwork – based by carrier
1. Verizon (CDMA) version: CMW Galaxy Nexus
File name:*recovery-clockwork-5.5.0.4-toro.img
MD5:*b2d31c29b7ef785f9c0802a12264d322
File size:*5,263,360*(bytes)
2. GSM version: CMW Galaxy Nexus
File name:*recovery-clockwork-5.5.0.2-maguro.img
MD5:*445887336a863573997ccbaeedddc984
File size:*5,427,200*(bytes)
Unlocking Bootloader
Part 1: Unlock
1. First off, you need to download the adb drivers. There have been mentions of just getting the drivers, but I actually have the entire SDK. You can download it here. http://developer.android.com/sdk/index.html
2. Plug in your device, then open up Terminal (Ctrl + Alt + T) and type in: “lsusb” (without quotes). This will pull up all the devices plugged into your usb slots. Look for the one that says samsung (others have found google, but please make note).
3. Find the device, then find where it says ID. After where it says ID, it should have a number/letter mix such as “04e8” or such. Make note of that for later.
4. Go to http://developer.android.com/guide/developing/device.html . This will give the instructions on how to Install the device drivers (specific to each manufacturer). Start from where it says “4. Set up your system to detect your device.”
5. Go to your internal and cd to platform-tools. (This should include both adb and fastboot.) Put your phone into fast boot. (Do this by holding the power, volume up, and volume down buttons while phone is off).
6. Once in fastboot, go back to your computer and type in “sudo fastboot oem unlock”. This will bring up the option to unlock your phone's bootloader on your device's screen. It will give you a disclaimer, and it will say that if you unlock, it will wipe all of your phone's data. Scroll to Yes using the vol up or vol down buttons, and select it with the power button.
7. If you boot straight from there, you will go through a series of boot loops (it was 2 for me) then will be prompted to go through the process of setting up your Google account again. again.
Congratulations, your phone is now unlocked. However, this doesn't mean that you have rooted your phone.
Rooting
Part 2: Putting Clockwork Mod Recovery On Your Phone
(do step one for preparation of Part 3)
1. First, we will want to push su.zip to your phone's Internal storage or “sdcard” partition. Open up Terminal and type the command “adb push 'directory_of_su.zip'/su.zip /sdcard/”. Hit enter/return and it should transfer over. (Based on the quality of usb cord, times of transfer may vary.)
To make this easier, put su.zip into the directory of adb. Then all you have to use for the command is “adb push su.zip /sdcard/”.EDIT:
After you root, you have to delete /system/recovery-from-boot.p and reflash or else every time you reboot, the recovery partition will be written over by android. This can either be done in terminal (phone or comp) or by a file manager with root access (such as Root Explorer).
Reference: http://forum.xda-developers.com/showthread.php?t=1392336
Thanks vihil
2. Put your phone in fastboot mode again (vol up + vol down + power)
3. Go back to Terminal and type in “fastboot flash recovery 'whatever the file name is'”. This will flash CWM (Clockwork Mod) onto your phone, deleting your phone's stock recovery image.
EDIT: If it doesn't work, i.e. due to permissions, run with sudo
Part 3: Flashing Super User onto your phone.
1. Next, go into Clockwork by hitting the volume up or down buttons till you see recovery mode. Hit the power button to enter Clockwork.
2. Scroll down (using volume buttons) till you get to “install zip from sd card”. Use the power button to select it.
3. Scroll down to “su.zip” and select it. Then, hit the selection for installing the zip file.
4. Go back using the “Go Back” selection to return to the main screen.
5. Reboot the system using the “reboot system”.
Congratulations! You now have Root access!!!
Have fun with Flashing ROMs!
Special Thanks to scary alien on androidforums.com and jcarrz1 on XDA
Reserved
Reserved......
Thanks a lot I was looking for exactly this. Appreciated. Will try in a few hours when I get my phone.
Downloaded the sdk file but have no idea what to do. My windows computer died and it would be a lot easier on that to do all this but all I have is a computer with linux currently so if anyone would be kind enough to tell me how to install sdk I'd appreciate it. I seen the read me and seen it says execute "android" first but I don't know how to do that. I realize this is incredibly annoying to the xda hive mind trust me I hate needing help like this I'm nothing close to a noob as far as rooting flashing and all that good stuff I'm just unfortunately stuck with only Linux. I'd really really appreciate it.
under the tools folder there is a script called android, u can either run it in a terminal or hopefully if u were to click it, it was ask if u want to run it!
If you want to run it, you can just cd to it in terminal, then do "./android" and that should do the trick.
./ is the way you execute scripts in linux.
Seems like my fastboot is stuck on `waiting for device`. I have the fastboot screen on my GN.
Before rebooting into fastboot `adb devices` successfully showed a device (i.e., usb debugging is enabled, dunno whether it is needed for the unlocking):
$ fastboot oem unlock
< waiting for device >
Any idea?
EDIT: Found the solution. After doing a `fastboot devices` it told me "no permissions fastboot" so I needed to be root on my computer for it to work.
FadedLite said:
If you want to run it, you can just cd to it in terminal, then do "./android" and that should do the trick.
./ is the way you execute scripts in linux.
Click to expand...
Click to collapse
Thank you! That worked correctly and installed it. Now the next step to check the usb and if its there does not work, I might be entering this incorrectly but I typed just lsusb and enter nothing happened, held down ctrl, alt, t then typed in lsusb and nothing happened then just copied that entire part encase I was suppose to and got this.
[[email protected] ~]$ (Ctrl, Alt, T): lsusb
bash: syntax error near unexpected token `:'
Like I said I'm not expecting help because I know XDA doesn't like noobie questions, I will be greatly appreciative if you have patience with me and will even be willing to donate once I unlock the BL and root it. Thank you again.
C-4Nati said:
Thank you! That worked correctly and installed it. Now the next step to check the usb and if its there does not work, I might be entering this incorrectly but I typed just lsusb and enter nothing happened, held down ctrl, alt, t then typed in lsusb and nothing happened then just copied that entire part encase I was suppose to and got this.
[[email protected] ~]$ (Ctrl, Alt, T): lsusb
bash: syntax error near unexpected token `:'
Like I said I'm not expecting help because I know XDA doesn't like noobie questions, I will be greatly appreciative if you have patience with me and will even be willing to donate once I unlock the BL and root it. Thank you again.
Click to expand...
Click to collapse
You don't really need that step. Since '04e8' is Samsung and you have a Samsung device it will likely always be 04e8.
Part 1, 3. and 4. can be summarized as following:
Put the following line into /etc/udev/rules.d/51-android.rules:
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", MODE="0666", GROUP="plugdev"
Execute: chmod a+r /etc/udev/rules.d/51-android.rules
Type the following to verify it is working: "adb devices" It should display something like:
List of devices attached
01492B093401000F device
Part 1, 6. should probably changed to "sudo fastboot oem unlock"
Also, Part 2, 1. the preparation makes no sense to me: "(do step one for preparation of Part 3)". How can I go into Clockwork recovery before completing Part 2? Since Part 2 is about installing Clockwork...
Edit: And I just realised, C-4Nati, you should not write the "(Ctrl, Alt, T):" out.. that's just a shortcut to open a terminal. Just "lsusb" is fine. Then it should work.
---------- Post added at 11:33 AM ---------- Previous post was at 11:09 AM ----------
For anyone wondering why the step by step instructions in the OP do not work:
You need to flash the Clockwork recovery and install su.zip before you can remove the /system/recovery-from-boot.p (and if you follow that link provided it will cost you around $3.50 but you should be able to do it manually, will try to figure it out).
---------- Post added at 11:38 AM ---------- Previous post was at 11:33 AM ----------
(I couldn't find the /system/recovery-from-boot.p on my GN filesystem but maybe someone else does)
To remove /system/recovery-from-boot.p:
$ adb shell
$ su
# mount -o rw,remount -t ext4 /dev/block/platform/omap/omap_hsmmc.0/by-name/system /system
# rm /system/recovery-from-boot.p
# mount -o ro,remount -t ext4 /dev/block/platform/omap/omap_hsmmc.0/by-name/system /system
For simplicity, you can shorten that to: mount -o rw,remount /system
You can also delete it from a terminal on the phone or any file manager that allows root access. I think the free ES file explorer has root options.
vihil said:
You don't really need that step. Since '04e8' is Samsung and you have a Samsung device it will likely always be 04e8.
Part 1, 3. and 4. can be summarized as following:
Put the following line into /etc/udev/rules.d/51-android.rules:
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", MODE="0666", GROUP="plugdev"
Execute: chmod a+r /etc/udev/rules.d/51-android.rules
Type the following to verify it is working: "adb devices" It should display something like:
List of devices attached
01492B093401000F device
Part 1, 6. should probably changed to "sudo fastboot oem unlock"
Also, Part 2, 1. the preparation makes no sense to me: "(do step one for preparation of Part 3)". How can I go into Clockwork recovery before completing Part 2? Since Part 2 is about installing Clockwork...
Edit: And I just realised, C-4Nati, you should not write the "(Ctrl, Alt, T):" out.. that's just a shortcut to open a terminal. Just "lsusb" is fine. Then it should work.
---------- Post added at 11:33 AM ---------- Previous post was at 11:09 AM ----------
For anyone wondering why the step by step instructions in the OP do not work:
You need to flash the Clockwork recovery and install su.zip before you can remove the /system/recovery-from-boot.p (and if you follow that link provided it will cost you around $3.50 but you should be able to do it manually, will try to figure it out).
---------- Post added at 11:38 AM ---------- Previous post was at 11:33 AM ----------
(I couldn't find the /system/recovery-from-boot.p on my GN filesystem but maybe someone else does)
To remove /system/recovery-from-boot.p:
$ adb shell
$ su
# mount -o rw,remount -t ext4 /dev/block/platform/omap/omap_hsmmc.0/by-name/system /system
# rm /system/recovery-from-boot.p
# mount -o ro,remount -t ext4 /dev/block/platform/omap/omap_hsmmc.0/by-name/system /system
Click to expand...
Click to collapse
for needing to type in lsusb, i found that as somewhat of a precaution. I had seen on other threads that others had their device show up as either google or samsung. So i just figured rather check first instead of installing both or something.
for the preparation, basically you do that since your phone is already on. after flashing cwm, you would have to boot back into your phone, push the file to your sdcard, then boot back into recovery. All it does is that it saves just a bit of time.
As for the sudo fastboot, I didn't actually have to do that, but i'll add it, Thanks.
As for the cwm terminal commands, i'll add that as well. Thanks again.
FadedLite said:
Part 3: Flashing Super User onto your phone.
1. Next, go into Clockwork by hitting the volume up or down buttons till you see recovery mode. Hit the power button to enter Clockwork.
2. Scroll down (using volume buttons) till you get to “install zip from sd card”. Use the power button to select it.
3. Scroll down to “su.zip” and select it. Then, hit the selection for installing the zip file.
4. Go back using the “Go Back” selection to return to the main screen.
5. Reboot the system using the “reboot system”.Congratulations! You now have Root access!!!
Have fun with Flashing ROMs!
Click to expand...
Click to collapse
not yet. after flashing su-bin-3.0.3.2-efghi-signed.zip (which is just the binary), the user still needs to flash Superuser-3.0.7-efghi-signed.zip, to have Superuser.apk placed in /system/app, otherwise GUI apps won't have access to su. (unless, of course, the zip you are linking here has them both)
It's preferable to have users linked to ChainsDD website, there people will find latest binaries and Superuser.apk. I also don't see any mention to him in the OP. Even if this is a tutorial, don't forget to give credit where needed.
Some help for an Ubuntu Noob/Not a Noob to Windows
Hi all,
Long story short, I no longer have Windows (nor a way to load Windows without a purchase; I'd rather not). So I have a fresh install of Ubuntu Linux 11.10. I have read this guide and some of the helpful responses and have yet to be able to get adb and fastboot up and running. I am beginning to understand the nuances of Ubuntu and have tackled adb and fastboot in Windows but Ubuntu is different. I would say I have put in two 12 hour sessions with no desire to pack it in and go back to Windows (I am avoiding a VM as well).
Here is where I seem to be stuck (mind you I have done a fresh install numerous times to start with a fresh playing field in case I have messed up something): Whether downloading the full SDK through Eclipse (cos I'd like to dev apps soon and why not have it?) or downloading the SDK on its own, I get it without fail. The steps leading up to entering in commands for terminal so that the computer recognizes either just my Nexus or a slew of OEMs are easy enough but maybe I am messing up. It is where getting the computer to see my device (udev steps) I can't seem to get it right. I have even looked at other guides for reference (most seem messy and convoluted) but keep coming back here.
I know you probably need more to go on and I am sooooooo willing to tell more. I just hope someone is down to help a brother out. Like I said, I just need some direction. I have manually rooted and all that jazz, just in windows. Thanks in advance for your help.
jmar
jmartino5920 said:
Hi all,
Long story short, I no longer have Windows (nor a way to load Windows without a purchase; I'd rather not). So I have a fresh install of Ubuntu Linux 11.10. I have read this guide and some of the helpful responses and have yet to be able to get adb and fastboot up and running. I am beginning to understand the nuances of Ubuntu and have tackled adb and fastboot in Windows but Ubuntu is different. I would say I have put in two 12 hour sessions with no desire to pack it in and go back to Windows (I am avoiding a VM as well).
Here is where I seem to be stuck (mind you I have done a fresh install numerous times to start with a fresh playing field in case I have messed up something): Whether downloading the full SDK through Eclipse (cos I'd like to dev apps soon and why not have it?) or downloading the SDK on its own, I get it without fail. The steps leading up to entering in commands for terminal so that the computer recognizes either just my Nexus or a slew of OEMs are easy enough but maybe I am messing up. It is where getting the computer to see my device (udev steps) I can't seem to get it right. I have even looked at other guides for reference (most seem messy and convoluted) but keep coming back here.
I know you probably need more to go on and I am sooooooo willing to tell more. I just hope someone is down to help a brother out. Like I said, I just need some direction. I have manually rooted and all that jazz, just in windows. Thanks in advance for your help.
jmar
Click to expand...
Click to collapse
Are you getting a "waiting on device" message or something similar when you run adb or fastboot?
Forget about the udev nonsense (not important really until you start developing full time) and just drop a sudo before your commands.
You can shoot me a PM or a gtalk (same username as my xda) if you want and I'd be more than happy to help you get your system going.
Thanks, still a bit more annoying that Windows but this tutorial makes it easy.
Sorry if this is ignorant, but can I use these instructions with Unix & terminal on Mac OS X? I'm thinking yes???
I rooted mine in linux as well... No problems. For some reason I was able to do it much easier though...
I did the fastboot oem unlock step above (Part 1). Rebooted then installed superuser from the android market. Then I installed Clockworkmod from the android market.
Done.
Not sure if I'm missing out on something by doing it this way but so far I've had no issues....
I didn't have a GN until this week so my only LIMITED experience was with my nephew's GN and I was not able to connect it to my Ubuntu 11.10, 11.04, 10.10 or Mint 12. I got my own this week and started the search. Here is how you do it courtesy of Shannon VanWagner
and his website Humans Enabled
Shannon's info:
https://plus.google.com/115207567016362184954/about
Thanks Shannon. Here is the what you should do: again all credit goes to Shannon VanWagner. Fire up a terminal session:
1-
Code:
sudo apt-get install libusb-dev
2- download libmtp tar.gz from http://sourceforge.net/projects/libmtp/files/libmtp/
3-cd to the directory you downloaded to: Download in this case, case sensitive
Code:
cd Downloads
4- extract the tar package
Code:
tar xvf libmtp-1.1.1.tar.gz
please make sure you check the file version, this file changes as it is updated and change it accordingly per the above website
5- cd to the newly created folder that has the extracted file:
Code:
cd libmtp-1.1.1
again don't forget to change the name if the version has changed
6- compile and install: do each step separately
Code:
./configure --prefix=/usr
Code:
make
Code:
sudo make install
7- while in the same directory in the terminal, copy the rules from there to the udev folder:
Code:
sudo cp 69-libmtp.rules /etc/udev/rules.d
8- install gMTP:
Code:
sudo apt-get install gmtp
9- open up gMTP, go to edit/prefrences and check the box for Always Show Download Path. This way when you are downloading from the phone to your computer, you are asked to choose a location. Use the Add button to upload from your Linux Box to the phone. Delete does, well, Delete a file.
Thanks so much for this. I was having all kinds of problems! Worked flawlessly!
I'm just wondering, why people still using USB cable for file transfers? There's gazillion threads here about broken USB ports and all of them are reall. I had my self that problem on SGS2 and since then i started to use Wifi Explorer. It's just safer and easier.
Don't take this as thread spoiling, i'm really thankful to everyone who shares info. l'm just trying to warn you, because USB port problem does exist even if you're extremely careful as i am.
Sent from my super Galaxy Nexus plus®
I love Wifi Explorer as well but you do run a much greater risk of a corrupted file over wifi as opposed to usb.
I didn't have to do step 2. All I did was install libusb-dev and install gMTP and it worked.
That said I hate what google did here! I can no longer play music via usb on my car deck because of this
MS. said:
I'm just wondering, why people still using USB cable for file transfers? There's gazillion threads here about broken USB ports and all of them are reall. I had my self that problem on SGS2 and since then i started to use Wifi Explorer. It's just safer and easier.
Don't take this as thread spoiling, i'm really thankful to everyone who shares info. l'm just trying to warn you, because USB port problem does exist even if you're extremely careful as i am.
Sent from my super Galaxy Nexus plus®
Click to expand...
Click to collapse
Thanks for the suggestion. I do use that especially since Amazon App store had it as the Free Paid app of the day a few months back. But you still need your wired connection for important files like radios, kernels, and roms. hate corrupted radios
Then i must be lucky, had no corrupted transfers yet (or at least i didn't notice that)
apt-get install gmtp fails.... I get the following::
Reading package list... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package gmtp
What now? I'm running 64bit Ubuntu 10.04 LTS
Hello, I wonder if can I expect a Fedora solution?
DAG425 said:
apt-get install gmtp fails.... I get the following::
Reading package list... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package gmtp
What now? I'm running 64bit Ubuntu 10.04 LTS
Click to expand...
Click to collapse
I'm sure you did sudo apt-get, right?
gMTP is in the Ubuntu software center. I guess you can get it that way too.
Yes, any time i know im gonna need sudo multiple times i just run root terminal.... Got it from package manager! Thanx!!
Anyone else noticing massive slow ups when transferring files? The only things that happens quick is to download something from the device, uploading, and deleting take forever.
Thanks man for the guide.
its working but its supposed to be so slow(connect takes so long)??
Hi I've followed your guide down to the letter but my Nexus won't mount gMTP hangs and refuses to respond. What do you suggest?
emmib said:
Hi I've followed your guide down to the letter but my Nexus won't mount gMTP hangs and refuses to respond. What do you suggest?
Click to expand...
Click to collapse
a little info may help. What version of Ubuntu are you running? Any errors?
You may also want to look in to mtpfs which is a FUSE filesystem providing access to MTP devices. It's easy to use and with correct permissions you can mount the device as a user.
I've been using it and there is a long pause mounting the device for some reason but read / write speeds are very good. When the phone is connected you simply mount it with:
mtpfs [mount point]
Lost Dog said:
You may also want to look in to mtpfs which is a FUSE filesystem providing access to MTP devices. It's easy to use and with correct permissions you can mount the device as a user.
I've been using it and there is a long pause mounting the device for some reason but read / write speeds are very good. When the phone is connected you simply mount it with:
mtpfs [mount point]
Click to expand...
Click to collapse
so you just connect the point and type the above? Do you have to specify the mount point? What do you use?
loveubuntu said:
so you just connect the point and type the above? Do you have to specify the mount point? What do you use?
Click to expand...
Click to collapse
Make a directory to mount it at (~/phone or something). Connect your phone in MTP mode then type:
mtpfs ~/phone
It's user space so you don't need to use su or sudo. You do however need to have FUSE support in your kernel. You may need some of the other dependencies but if you install mtpfs in mint it should pull those in (I'm using Mint 12).
loveubuntu said:
a little info may help. What version of Ubuntu are you running? Any errors?
Click to expand...
Click to collapse
I'm terribly sorry about that, how rude of me XD I'm not running Ubuntu, I'm running Linux Mint 12, 32-bit. My Nexus is completely stock, GSM, running 4.0.2.
I finally can transfer files between ubuntu and my galaxy Nexus. Dumb google.
It took me days to find this thread. Wow you are amazing. I have tried different tutorial that would freeze my pc. Thanks for for sharing.