cyanogen 7 stuck in boot loop after flashing - Wildfire Q&A, Help & Troubleshooting

anybody please help.. previously i was using wildpuzzle rom
now i flashed cyanogen 7 stable but it starts into booting loops..
after that i flashed cyanogen stable 7.0.2 but same problem occurs in it..
i flashed diff kernel HCDR.Kernel_v4.2b_Flashable and HCDR.Kernel_v4.1_Flashable
both dont effect any.. looping doent stops.. then i restored my wildpuzzle rom and again working fine.. now anybody tells me wats the problem nd how do i stop dis boot loops or restarts.. i want to install cyanogen 7.. i always wipe nd erase evrything before installing new rom in the recovery. so wat to do now? help please..

You don't want Jacobs Kernel anymore.
Wipe Cache partition
Reset data / factory reset
Format System
Format Boot
Wipe Dalvik cache
Then Flash the new rom

thanx for reply. actually i tried all dese and it dont work.. now i installed cyanogen but not installed gaaps package and it turns on fine after installing and working gr8 from last day.. so now how could i get gapps on my wildfire on cyanogen rom?? i just want google market to download stuff, nothin else.. how could i???

probably you flashed a Google apps with wrong resolution?
this is the right one:
http://goo-inside.me/gapps/gapps-gb-20110307-signed.zip
It is linked on first post in Nightly builds thread... so I wonder why you didn't see it before!?

bcoz i didnt downloaded nightly build or not visited that thread. i visited cyanogen 7 stable nd the gapps which was there listed i downloaded that one..
and it was
gapps-mdpi-20110301-signed
now dnt know whether it was right or wrong..
anyways.. thanks for help.. will see if ur one works or not..

thanx man it works..

ShyamSasi said:
Wipe Cache partition
Reset data / factory reset
Format System
Format Boot
Wipe Dalvik cache
Then Flash the new rom
Click to expand...
Click to collapse
Went from DK Custom Froyo V4.6.2 to CM7 and phone started to boot loop, this solution fixed the problem. (Took me a lot of search time on this forum )
Wildfire; Revolutionary S-OFF, CWM 5.0.2.0

Related

[Q] Help.... phone stuck in saying "CyanogenMod 7"...

HI... i updated my phone with cyanogen 7 rc2, but after it booted up it's stuck in the animation that says cyanogen mod 7 , and the blue android sign... in comes than goes, again it comes... about 20 min stuck... what to do???
It sounds like you need to go into recovery mode and delete all your caches. If you are using ClockworkMod recovery do the following (make sure you are backed up first):
Delete all user data and info (under wipe data/ factory reset),
Wipe cache (under wipe cache partition),
Wipe Dalvik Cache (under advanced).
Then once you've done that try installing and running the ROM again.
i done that one time... for info im using AmonRA.. i cleaned all the cache and everything also... and installed again... nothing happens... fortunately i restored my nand backup and booted my phone with the OTA again... waiting for some answer.... do u think that installing stable version can fix this?
Sounds like a bad flash. I had rc2 running for a month or so with no issues. I've had times when the rom just doesn't install properly ans reflashing fixes it.
Download the zip again, if possible check md5 to make sure it's all good, make sure you have the desire/bravo GSM version, clear everything and flash just the rom and nothing else. If it boots, then go back and flash your gapps and whatever else you want.
Sent from my HTC Desire using XDA App
thx for replying.. as i was waiting for your reply, i download the cm 6 that is a stable version and checked, it has the same problem too.. i also downloaded GingerVillain 1.6 and it had the same problem too. do u think the problem might be that my phone is "s-on"? and how should i know if my phone is s-on or s-off... when i was rooting my phone with unrevoked, i checked the option that says disable security, but i'm not sure if it's disabled.... because i can't install un-signed zip packages....
any reply?
That definitely sounds odd. Its definitely not an issue with S-ON/OFF, nothing you've done here requires S-OFF to work properly.
Lets just make sure you're following all the steps.
In amonra, you've done your nandroid backup, so no need to do it again. There's no point having a non working backup
Go to wipe and wipe data/factory reset
Wipe davlik cache
Wipe sd-ext (shouldn't need to do this one as you don't have apps2sd yet, but better to be safe)
Now you flash your update.zip, then reboot and you should be fine. The only other thing I can perhaps suggest if every rom you flash sticks at boot is to perhaps try clockwork recovery instead of amonra. Apart from that we might have to wait for folks more knowledgeable than myself cause I'm all out of ideas.
thx for reply.... in meanwhile , i s-off ed my phone and it has the same problem too... i have problem with all cm and gingervillain roms.. but i don't have any problem with leedriod... one more question that maybe the problem is that i have android 2.2 installed, but gingervillain and cm use android 2.3 ... this maybe the problem.... and that's why leedroid works right, because it uses android 2.2.... i'm going to check OxyGen roms... i will post the result here...
i also faced same problem CM7 .. i tried CM6 and it went on fine..
heyyy... right after i posted the reply , i went to recovery and wiped anything, then installed gingervillain 1.6, and everything's fine now... it booted up and now im setting it up.... im going to check the cm 7 too.
i tried cm7 rc2 ... and it was fine and now im using it... here's a how to for solving the problem...:
1.S-OFF your device with AlphaRev : http://forum.xda-developers.com/showthread.php?t=805811
2.Install the AlphaRev Recovery(S-OFF Image will do it automatically).
3.Go to recovery and install the rom...
4.Boot up and it should not go to system and it should stay in loop as the problem was..
5.Now you should reboot your device into recovery... there are two ways to do this... either take the battery off and put it on, then boot to bootloader by pressing the volume down and the power key and select recovery , or the second way connect it to your computer and start adb and run this command:
adb reboot recovery
6.In AlphaRev recovery first wipe the cache partition , wipe user data, and factory reset...
7.then install the rom (either cm7 or gingervillain)...
8. boot up , and now you have the system running...
This solved my problem... reply if it didn't yours...
hooo.. it worked for me now. just kept update.zip in a new SD card and not flashed google apps..
im very happy that i solved one's problem.. ... thread marked as solved...
*UPDATE* : now i realized that we can mark it as solved.. !!! hehe.. Admin do it for us...

cyanogenmod7 rc1.5 wont boot ahead the GOOGLE logo.help needed urgently

hey,ive installed the cyanogenmod 7 rc1.5 in my defy mobile.i did EVERYTHING neatly,but now my defy is stuck at a google logo and does nothing else.its not my phone its my dad's who will be back from a project in a couple of days,help needed urgently.
ooh,and i can access the clockwork recovery and stock recovery
clear cache and dalvik cache in custom recovery and reboot. Wait for 10-15 mins , if it doesnt boot try flashing cm7 rc1, clear cache and reboot.
If it still doesnt work you could just flash stock froyo or eclair using rsdlite. That will bring the phone back to how it was when u bought it
thanks you for you help
but ive tried everything youve said.i tried flashing sbf using rsdlite but it gimes me some stupid error,flashed cyanogenmod7 rc1 using cwm recovery,but it says bad file or sometimes it gives me an error saying that it cannot be installed as gingerbread is already installed or something.

[Q] I can't flash anymore roms :(

Guys I tried to flash CM 7.1 stable on my girlfriend's defy and on the first try it didn't install correctly the google apps so I had to reflash them again.
Since that moment I couldn't be able to access the rom anymore, it was stuck in boot loop.
So I flashed some sbf's but I was'nt satisfied with any of them so everytime I try to repeat the whole procedure (root, recovery, flash) the CM 7.1 rom that I flash doesn't start, it stops on the CM boot logo.
Today I tried again installing CM starting from a Froyo sbf, but again no success, this time it's stuck on the original motorola logo, not even the CM one.
What can I do? it seems like I'm not able to properly flash a rom anymore, only sbf's work. Thanks!
have you wipe data from recovery before apply cm7....?
check if you have wiped data before flashing cm plus which version of 2ndinit did you install ???
tegezan said:
have you wipe data from recovery before apply cm7....?
Click to expand...
Click to collapse
Yes, I wiped data, cache and dalvik before applying cm7.
flunk03 said:
check if you have wiped data before flashing cm plus which version of 2ndinit did you install ???
Click to expand...
Click to collapse
I wiped data. I installed 2ndinit 1.9
One more wipe
You should also do a full wipe (data/cache/dalvik/Battery Stats) AFTER applying all the zips.
wipe everything and try
wipe both data/cache and then try
if its for your girlfriend's phone then try cmiui its awesome man.
im sure you will be appreciated for this from your girlfriend.
you can find that over here.
http://forum.xda-developers.com/showthread.php?t=1268997
download --> go to recovery mod --> wipe data and cache --> install zip from SD card --> select zip and wait for some mins and your phone will start cmiui
i have installed 2.1 but you install 1.8 or 2.0 its working fine.
Regards,
cheat.
Tyler83 said:
Yes, I wiped data, cache and dalvik before applying cm7.
I wiped data. I installed 2ndinit 1.9
Click to expand...
Click to collapse
there you go thats the problem installing 1.9 and trying to install cm causes a bootloop use 1.4 that is known to be stable and will work !!!!

Can somebody please help me!!!!

i flashed to cyanogenmod 7 nightlies, and then i installed from the sd the google apps (because the rom didn't come with market) through clockwork mod recovery and when i restart the phone, there is a blackscreen after the htc!!! It doesnt load up the cyanogen mod!! I've been waiting for over an hour!!!
I don't know what to do to fix it!!!
Can somebody please help me. I appreciate it very very much!!!
hey bro... dont flash two zips in one go... just flash cm7.2 again.. then reboot into recovery and then format dalvic cache, format factory and etc.. and then rebot again into recovery and then flash gapps
striker280 said:
i flashed to cyanogenmod 7 nightlies, and then i installed from the sd the google apps (because the rom didn't come with market) through clockwork mod recovery and when i restart the phone, there is a blackscreen after the htc!!! It doesnt load up the cyanogen mod!! I've been waiting for over an hour!!!
I don't know what to do to fix it!!!
Can somebody please help me. I appreciate it very very much!!!
Click to expand...
Click to collapse
as mhrsolanki2020 said ... When flashing rom, always boot it, and after reboot flash any changes that you want, like data/link2sd,gapps,gps fixes and so on ...
never flash few things in one step.
also clean cache and dalvik every time you flash new rom ..
I don't think he wiped data or cache.
You can flash cm7 and gapps at the same time with no issues.
I prefer doing it like this rather than multiple restarts and then I setup my accounts on first boot its never given me any problems.
Try again make sure in clockwork mod recovery you:
wipe data/factory reset
Wipe cache partition
Then goto advance and wipe dalvik
Then flash cm7
Then flash gapps
Restart and all should be fine.
Good luck.
so are those the steps i need?
and can u give me a link of the gapps i am supposed to use please?
striker280 said:
and can u give me a link of the gapps i am supposed to use please?
Click to expand...
Click to collapse
here you go mate ht tp://cmw.22aaf3.com/gapps/gapps-gb-20110828-signed.zip
can you give me the steps i need to fix the black screen please?
Boot into recovery clockwork mod and do what I said above and you'll be fine.
so once i flash cyanogen i do not reboot first, but i directly flash the gapps as well?
Yes that's how I been doin it for many months
Make sure to wipe the data that I said in previous post or it wont boot.
Its an important step when flashing a rom.
Like the problems that previously occurred.
sorry for so many questions but,
is it either wipe data or factory reset or both?
"wipe data/factory reset
Wipe cache partition
Then goto advance and wipe dalvik
Then flash cm7
Then flash gapps"
'Data/factory reset' is the same thing
Then 'wipe cache partition'
Then in advance right at the bottom of clockwork mod 'wipe dalvik'
Once done click back then chose install zip from SD
Choose your rom file then confirm.
Then when finished click back.
Then install zip from SD select gapps file and confirm.
Once finished click reboot system.
Done.
will this work for sure? or will it give me the black screen again?
If you do everything I said in the same order it should definitely work my friend.
Is your mobile a GSM or cdma? Does it use a sim card?
Thank you so very much!!!!
No problem.
I'm guessing your up and running And hopefully very happy.
Good luck and all the best.
You're a life saver!!!

easy way to downgrade from cm9 to cm7.2

i have flashed cm9 un official just for look but now wnats to downgrade to cm7.2 ,,,i have wiped all my data dalvik chache n all the opions their in recovery but didn't got the solution ..after flashing never booting rom.what i have to do??plz guide..i searched alot but never got my solution !
a_amir1986 said:
i have flashed cm9 un official just for look but now wnats to downgrade to cm7.2 ,,,i have wiped all my data dalvik chache n all the opions their in recovery but didn't got the solution ..after flashing never booting rom.what i have to do??plz guide..i searched alot but never got my solution !
Click to expand...
Click to collapse
after you did the wipes...... you did choose install zip from sdcard,navigate to the cm7 zip on your sdcard and confirm?
just wiping does not downgrade!! to cm7 you have to re-flash it.
Invalid user id !!!!
yes.. after wipes i reflashed the rom but its not booting
have you set custom mtds? if yes remember to redo the bravo boot flash after install.
if you dont know what mtds are then it wont be that problem.
never used a cm9 rom so cant really help much more as im unaware of all the processes you go through but a full wipe and fresh flash should be sufficient. !!
Invalid user id !!!!
yeahhhhhhhhhhh... got it!! thnx slymobi !
i was making mtd partition throughout this http://forum.xda-developers.com/showthread.php?t=1233340
there were two problems
1. .txt file was making .txt.txt by my mistake
2. and was making mistake in nanroid backup step...
i tried all the tutorial again word by word and in nanroid backup step i flashed a new rom and then follow the tutorial..and the problem was solved thnx yaar!!

Categories

Resources