Related
I got a file and some apps & drivers.
You can find a PDF file in the attachement.
Please read it to see whether it can help.
Apps & Drivers:
http-//rapidshare.com/files/455584224/KinTwoSetupApp.rar
( - should be replaced with : )
Hi guys, here is another USB driver for KIN TWO which is a little bit different to the one uploaded above.
http-//rapidshare.com/files/456921463/KUSBDrivers.rar
( - should be replaced with : )
Thanks to every one here.
Let's work together/
This looks to be exactly what we are looking for. This will definitely open up the possibilities of modifying the current kin os, or porting a new os to the device. However, this guide is useless without the tools and files mentioned in the document. You said you had some files as well, do you have these files?
SPST Vn.n.n.msi.
PB10ZUnPB20ZU (Lab) Vn.n.n.msi.
SPSTUSBDriverInstall.msi.
InstallPMXMTP.msi
With these files we be able to finally successfully hack this phone.
This is great. We have the resources, now we must figure out how to get a modified os on the phone using the tools.
Awesome find KinPhoneLover; not sure how and where you got this SPST, but it could be the very thing that is needed. For people who bricked their kin phones, they should try the "refurbish feature" to see if that will successfully reset their phones back to "factory mode". As for getting a new OS on the phone, in the pdf at the "Upgrade section", when you browse for the firmware file, it is a .ecn file. Not sure how flashing is done for Cyanogen and those other Android custom firmwares, or their file type extensions. If SPST only supports/allows .ecn files, that could be a problem trying to use those Android custom firmwares.
wow, this is exactly what we needed....did this get leeked or something? it says its from the sharp corp., so im guessing they got it somehow by chatting with them? why isnt there a lot of buzz about this??? i can read my phone number and everything off of this...so close to getting android, or just putting java apps on it..
Too bad its only 32 bit But yes. This is one step closer. Please, people with brick kin, test it out. See if we can get the ball rolling again.
Radar2004 said:
Too bad its only 32 bit But yes. This is one step closer. Please, people with brick kin, test it out. See if we can get the ball rolling again.
Click to expand...
Click to collapse
yes, i have to use my slow home computer, instead of using my quad core 64bit laptop
Just got everything up in running. Is anyone else having a problem with the SPST constantly dropping the connection with the phone and reconnecting? I'm not sure if this is due to running XP in a virtual box or if its something I can readily fix.
Short Answer: doesnt work.
Long Story: This needs your phone to be ON even for refurbish option and then, able to connect to a COM port. Unfortunately, that doesnt happen in SBL / APX mode and phone doesnt boot (autoreboots) so no COM mode available.
Just another software installed (for me).
No news in the front, guys. I guess i just need to get rid of verizon software (the one trying to get an OTA), not something from "normal" kin states.
Okay so now that we have a tool to upgrade the software all we need are custom firmware files to flash to it. However I don't see any option to read/dump the firmware using this software.
dezgrz seems to be correct, there don't seem to be a way to read/dump the current OS to make a backup of it. The PRL and ERI options don't seem to be what we want. The Provision option is the only option where we can read stuff from the phone. Could someone run that option, check all those settings (NAM1, security, feature, data, etc) and write it to a file and upload it? Maybe there will be something useful in there.
I gotta order a new battery, then I'll see if I can get anywhere with this... need to load up a 32bit OS first, apparently.
Either way, this is a huge step. Maybe not complete, but still a huge step. Thanks OP.
Hm..??
This seems interesting. I been watching this site until someone "Exploited" the phone. I have a mac, and does this work for kin? What does it do?
zero2duo said:
Could someone run that option, check all those settings (NAM1, security, feature, data, etc) and write it to a file and upload it? Maybe there will be something useful in there.
Click to expand...
Click to collapse
That features seem to be available already with "QPST" software... which didnt make anything advance (yet).
As i said, i renamed my NAM succesfully, and changed some security options (which i guess that doesnt matter, cause i *was* able to work anyway).
not much you can do that you cant do already, besides looking at your phones info. I was able to change voicemail numbers, was *86, i changed it to to just 8, and it says voicemail, but doesnt connect. Still playing around.
Why don't you just take it back to Verizon and get a replacement. How would they ever know you messed it up trying to hack it?
MicroNateDram said:
Why don't you just take it back to Verizon and get a replacement. How would they ever know you messed it up trying to hack it?
Click to expand...
Click to collapse
You should read the whole threads and/or other threads to understand why.
This phone needs to get hacked. I love my phone but i dont like the OS that the phone has. If this phone isnt hacked by the time summer comes, ill be glad to participate. I've hacked many phones but this may be a challenge. I would like to see apps on this phone.
PS I know the phone has java so where can i go to play games or apps for java?
Kinuser1 said:
PS I know the phone has java so where can i go to play games or apps for java?
Click to expand...
Click to collapse
Javascript
johnkussack said:
Javascript
Click to expand...
Click to collapse
Out of all the things I know, why wouldn't I know that its Javascript? Jeeezus. I would happily spend time on this phone but my grades are more important. Now what site could I go to on my phone to play apps/games.
P.S your post didn't really help me.
just wanna let everyone know that i have fully flashed the CDMA HTC Desire to cricket with everything working, sending/recieving mms, and all apps access internet fine, using tokens flash, and conaps edited mms apk.
i have not seen ANY posts ANYWHERE that said if this phone was even able to be flashed, so i figured i would let everyone know it is, also i am running the latest cyanogenMod rom
This great news! I was considering buying a HTC Desire and flashing over to cricket since I'm able to get it for a good price.
Can you explain how you flashed it?? and what carrier was under the HTC desire?
pm'd you, if i didnt put it clear enough(i didnt go to much into detail cause i figure you know how to flash roms/rooting) i will break it down alittle more if needed. and the phone originally was nex-techwireless.
I just bought a used Desire from eBay with the intention of flashing it to Cricket. Could you PM me the instructions as well? It would be most appreciated.
darkmage1991 said:
pm'd you, if i didnt put it clear enough(i didnt go to much into detail cause i figure you know how to flash roms/rooting) i will break it down alittle more if needed. and the phone originally was nex-techwireless.
Click to expand...
Click to collapse
Well I managed to root and flash a new rom, but I'm still having trouble to how to flash it over to cricket.
you must have a sense rom flashed in order for the diag mode to work. if you already flashed another rom flash one of these as a temp, and once the settings have been made you are free to flash another rom.
http://forum.xda-developers.com/showthread.php?t=992802
http://forum.xda-developers.com/showthread.php?t=947481
first root the device with unrevoked, once its rooted download qpst(i use build 366)
now after thats download and installed you need to download the htc diag drivers and put your phone into diag mode(its either ##diag, ##diag#,##diag*... it starts with 2 # followed by diag just not sure of the last symbol) once its in diag mode plug it in and the computer will instal drivers, wait for that to finish then go to device manager and manually update the htc drivers using the download htc diag drivers. after that is all done you must now open qpst configuration and click ports, then click add new port and add anything you see about your phone. now once thats done you need to click start clients and select service programming. and set all settings like in these pics http://s798.photobucket.com/albums/yy266/darkmage1991/ and dont forget to write a cricket prl i suggest this one http://www.4shared.com/file/we3VLGo_/42900.html (its a cricket sprint hybrid), once those are set push write to phone.
http://download.cyanogenmod.com/?type=stable&device=bravoc get the newest cyanogenmod build (7.0.3 atm) dont flash it until you get the qpst settings set in a sense rom. now download the cricket v10 here http://forum.xda-developers.com/showpost.php?p=7261108&postcount=1 and flash it.
now download apn backup & restore, exfile explorer, and autostart off the market using wifi.
open your voice dialer and say "open proxy settings" once thats opened type in "wap.mycricket.com" and "8080" for the port #
now open apn back & restore and restore these apn's http://www.4shared.com/document/h5A_Izso/apns.html
Now we get to the part where we get MMS working, do this stuff you must open exfile explorer and make sure you mount as rewritable
Delete the mms.apk located in system/app
Drop the modifed mms.apk into system/app
Delete the telephony.db file located in data/data/com.android.providers.telephony/databases
Drop the modified telephony.db in data/data/com.android.providers.telephony/databases (Be sure to rename the telephony.db file you downloaded back to telephony.db before dropping it back into data/data/com.android.providers.telephony/databases)
get the modifed mms and telephony here: http://forum.xda-developers.com/showthread.php?t=968582
ok i think i got everything, if something is not working let me know i may have missed a step. and remember to thank all the people who created all those files for there hard work.
i know it seems like a lot of work but it really isnt, i redo my flash about every 5-10 days cause i cant decide what roms i like lol, and it only takes about a min to get it flashed again but you do not have to redo the qpst part only the downloading of autostart, ex, apn etc, and getting mms going
if you guys are like me and flash alot of roms, you will find some dont let mms to work, and other dont alow internet for apps to work(but internet for the stock browser will, this is due to iptables some dont support it) its just trial and error =P
and i suggest going over to 2fast4u.com and check out his AWESOME cdma roms for the desire his work is awesome and so far all his roms work fully on cricket
I have success of getting my 3G working .
However, i can't make calls lol.
And to add, The mms fix link is broken when i try to download: telephony.db.zip. can u post a different link for it?
Do you have to activate it to recieve calls or something?
(edit): i cant extract telephony.db.zip. Do i take the whole file and drop it? or do i extract it?
no dont extract it rename it to telephony.db (remove .zip)
My wish came true!!
Goood News, it works!!
I can recieve calls and text and web(even thought its kinda slow at the moment).
Everything is correct from the tutorial, its just i had to call cricket to register the HTC desire under my cricket account. Ugh... It was a long process but i got it .
No activation, it worked right after they register my MEID thiny from the back of my phone .
Sooo yeah, how can I speed up my 3G? Its slower than my Huawei ascend's 3G. :/
I still cant get MMS working -_-.
o wait, its cause your ascend was on the "android" plan paying 55 a month but flashed phones are only alowed to be on the 45 a month plan, and that plan requires the use of the proxy (wap.mycricket.com) and the proxy has a speed limit on it unlike the android plan.
and if someone actually let you stay on the 55 a month with the flashed phone, then that means internet shouldnt be working at all due to you installing autostart, and setting the proxy settings. something you can try is open your voice dialer and say "open proxy settings" and erase the info and see if the internet even works, if it works what uninstall autostart.
and mms requires the modified mms app, telephony.db, and the apn's to be set using apn backup and restore, if you did do all that redo it. use exfile explorer and go into /system/app and delete the mms.apk and paste the modified one in there, after that click and hold on it and go down to permissions and set it like this(the x's put a checkmark in leave the o's empty)
xxo (user)
xoo (group)
xoo (other
now do the same with the telephony.db, then open apn backup&restore and delete apn's then click restore and use the apn file linked.
Need Help
Hi guys, sorry to interrupt.
I've been on the net for quite some time now searching for a solution to my HTC Desire problem but this is the first time I come across people who seem to know what they're talking about!!
My HTC Desire was working fine for almost 5 months ( I bought it from a close friend who brought it from Romania). the phone is already rooted or flashed or what ever you call that, I get a Joker holding a card on which is written S-OFF and around the Joker is Written "Why so serious" when I turn on my phone (if that helps you know what ROM or Root the phone is equipped with...)
The thing is few weekes ago, the phone began turning off by itself, just like that and I had troubles rebooting it ( sometime it just keeps on rebooting all over again uncessefully, so i had to get the battery out, wait few minutes before hitting the power button again). the Camera and the Camcorder stopped working suddenly and the phone starts rebooting every 10 minutes max.
I tried to root it again with unreviked 3, it was working pretty fine until the program tried to rebbot my phone and the Mothef....r wouldn't reboot (original problem) so communication was lost and rebbot was uncessfull.
I installed the latest version of HTC sync from HTC web site, but it wouldn't detect my phone !!!!
So now, I wanna flash the existing ROM with THE ORIGINAL one, the HTC official one as if I just bought the phone from a store. Is it the Solution for my problem?? and if it is can you please explain to me what to do exactely in the process ( if you can explain the terms you use "cricket" "build 366"...)
I know it's a lot to ask but I would be greatfull if you could help.
Thanks.
Ill try it out. I was using my stock 2.2 froyo with sense instead of the cyanmod since i like the interface better. I was sending text through the sense rom but cant send any mms apparently.
Another problem that i came across cyanmod's latest rom is that it has no market place -_-'.
No luck :/.
Is there a rom where I can have working MMS? lol
As for the telephony file. I just realize I had to create all those directories for me to put the file in, could that be part of the reason why?
i believe i had to create it also the file goes in this directory /data/data/com.android.providers.telephony/databases/telephony.db , as for working mms rom, cyanogen 7.0.3 works fine, i think you have something not set or wrong.
and for the other guy i would reroot and flash a cyanogenmod rom and see how it is. and make sure you choose the correct rom(gsm is for desire's with a sim card, cdma is for desires without a sim)
Thanks for the guide, while I won't be using it myself, I'm sure someone will. I'm trying to make a CDMA Guide thread so I might use it and link to it.
you dont need worry bout it , this guide is only for people that are wanting to flash the phone carrier to cricket from uscc or another carrier. so not much people need this info, and the people that do need it can find it with the search button like the last people have done.
USC Revert, HBOOT 1.06, and Carrier Text on Lock Screen
DM, thanks for all your work on this. Would you happen to have a .qpst settings file for US Cellular should someone decide to revert it back? Or perhaps a .qpst settings file for Cricket that just needs the DN changed where appropriate as indicated in your screenshots? That would be a great addition to this thread.
Second, I would like to comment here on how rooting via unrevoked did no work for me due to my phone having HBOOT 1.06. I had register for the beta for this program: revolutionary.io
That unlocked the bootloader for me an installed CW Recovery.
Third, I have been trying to get rid of the US Cellular on the lockscreen in CM 7.1 with no luck. Any suggestions? Carrier Name app: fail. CCName: has become deprecated. SQLite edit: custom_lock... record not in secure table as indicated on this thread: forum.cyanogenmod.com/topic/22493-bring-back-settings-location-security-show-custom-message
Finally, I would like to readdress the possibility of a phone reprogrammed for cricket not using the proxy. Has anyone tried this recently?
I think changing the value in build.prop is all.
Need help getting 3G data working
Okay, I was flashing this phone for my father-in-law for a Christmas gift, so I was finally able to get the ESN updated with Cricket to activate the phone. Phone calls work, SMS works, but 3G does not and neither does MMS.
3G is the only service that I am concerned with fixing at the moment, so I was wondering if anyone has some input on how I can troubleshoot the problem. I noticed that the Cricket guy put him on the $55 Android plan; is this part of the problem? Do I just need to not use Autostart and remove the proxy? Do I need different APN's than those provided?
HELP..I flashed my epic touch to cricket and everything was fine with codename ROM, But now i need to change the number...still on cricket...but the cricket store tells me i need to fully re flash for all services to work?...that cant be right can it?...please tell me there is some thing i can do? ( to just transfer the new number over and get data and all other services running?
You'll need qxdm qpst and the proper settings. Start by learning how to read the current settings from the phone. Do lots of searching the Internet.
Once you can read the settings it'll be sorta self explanatory what needs to go where.
shaun111 said:
HELP..I flashed my epic touch to cricket and everything was fine with codename ROM, But now i need to change the number...still on cricket...but the cricket store tells me i need to fully re flash for all services to work?...that cant be right can it?...please tell me there is some thing i can do? ( to just transfer the new number over and get data and all other services running?
Click to expand...
Click to collapse
Thanks and will do...It just goes up my (you know where) to have just paid to flash and know they tell me to pay to flash again to switch phone #"s...on a rooted phone.....
my friend has been BUGGING me for days to finish flashing his Sprint SPH-D710/E4GT that was on 4.1.2 over to MetroPOS...er...PCS.
ive been flashing for quite a while now and am proficient in using QPST and flashing ROMS and getting into DIAG mode and setting PRLs and all that jazz. but every tutorial i've looked at has the exact same instructions, word for word, and the settings don't seem to be sticking properly.
http://forum.xda-developers.com/showthread.php?t=1596972
metropcsflash.blogspot.com/p/samsun-galaxy-s2-metropcs-full-flash.html‎
those are the 2 most common when searching google. the second one mentions using the HTC Incredible guide to get the Web, then goes on about "Assuming you already have call and text and web now" uh, doesnt this say FULL FLASH?
but i can't get call and text. web and MMS isn't an issue for him right now.
so i need a little help getting the talk and text working.
when i dial 611 it says enter my 10 digit phone number but cannot connect. when i dial *228 it goes to Verizon Wireless Programming. i cant get ##7764726 to pop up. the New_SenZation2.3 links are down and any other rom ive tried using has the same ##PROGRAM problem. it also doesn't let me program it properly from the handset ##000000# menu. the Service Programming menu doesn't show the proper MIN or MSID that i programmed with QPST, but when i click on it to edit...it does? click SAVE and it shows the old one again. also, DIAG mode isn't ##8778# like the tutorials suggest. its ##3424#.
"*If wanted flash the EL26 modem"
well, DO i want to flash the E26 modem? then it gives these options below but where are they from?
and i have flashed the proper PRL, unless there is an update one.
i apologize if my post is a little confusing. just woke up after passing out trying to flash this damn thing over.
if there are any FULL tutorials on flashing his device, not just getting web or MMS working, please point me in the right direction. if helped out, ill write a proper flashing guide too. THANK YOU
So I had my usb charging port detach from the board on my phone. I got a new one, (well used but new to me) and it was flashed to VERIZON but unrooted, bootloader locked, and s-on. On my computer at home i couldn't get the phone to communicate with the computer using windows 7 64 bit. I had flashed and rooted the old phone so I'm not exsactly new to this. For some weird reason I could not get the NEW phone to communicate with the computer with the same drivers from my old phone. I went to a different computer and the drivers loaded fine. however upon flashing the configuration file from my old phone, (a configuration file obtained off this forum, the qpst cricket configuration file) to the new phone using QPST the phone did not recive ANY service (cricket or verizon). I have no bars at all. upon reading the phone through QPST all the settings took to the phone but theres no service or 3g. After several attempts to load the configuration file to the phone at one point i had 2 bars light up briefly indicating that there was service then disappear and cant get service.
Would using linux to flash the phone help? I couldn't find anything on google or the search bar on here on how to use linux to flash the phone to cricket.
Only possible thing I can think of on why I cant get any service to this phone is i have yet to deactivate the old phone. is it possible cricket is blocking any service to this phone because the MIN is already registered to my old phone?
I know this post is kind of confusing so please let me know if theres any way I can clairify it.
Well using qpst on linux is not very easy. Windows is your best bet. Also to get full service cricket must change your service to your new phones esn. Or you have to clone the esn which xda does not allow us to talk about on their fourm due to legal reasons.
Now if you have everything set correctly you should be able to get data to work but sms, mms, and cell service is all linked to esn. If you are getting now bars I am willing to bet your prl needs to be changed.
I have flashed several Og evos and 3d evos. Along with doing the unmentionable (cloning). Check your messages I will send you a pm with some information on flashing to cricket.
Sent from my PC36100 using xda app-developers app
jlmancuso said:
Well using qpst on linux is not very easy. Windows is your best bet. Also to get full service cricket must change your service to your new phones esn. Or you have to clone the esn which xda does not allow us to talk about on their fourm due to legal reasons.
Now if you have everything set correctly you should be able to get data to work but sms, mms, and cell service is all linked to esn. If you are getting now bars I am willing to bet your prl needs to be changed.
I have flashed several Og evos and 3d evos. Along with doing the unmentionable (cloning). Check your messages I will send you a pm with some information on flashing to cricket.
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
I need to rephrase my statment. The problem isn't not getting service to the phone the problem is not getting ANY SIGNAL at all. and im using the qpst settings for cricket off this forum. But i may have found out the problem. I looks like the phone may have been updated, i just saw some options on the phone my old one did not have. Sprint optimizer plus the roaming settings were set to sprint only. BTW cricket doesn't care if a phones ESN is clean or not.
which rom are you using? did you change the prl when you flashed over to cricket? did you change the msl code? you actually dont need a computer at all to flash the phone. on any of the stock rooted roms yo ucan change the needed settings right from the phone itself using the dialer codes. ##data# #, #7786#, ##000000#, etc etc.
haxin said:
which rom are you using? did you change the prl when you flashed over to cricket? did you change the msl code? you actually dont need a computer at all to flash the phone. on any of the stock rooted roms yo ucan change the needed settings right from the phone itself using the dialer codes. ##data# #, #7786#, ##000000#, etc etc.
Click to expand...
Click to collapse
Stock Rom.
Yes I did can't remember off the top of my head which prl.
Not sure what the msl code is, if its the same as the MIN that I called cricket for I used the same one as my old phone, should that be different with different phones? (min number)
I did not know that about flashing using only the phone. I'm not sure what is search for, to find that tutorial so if you'd be so kind to link me to one or write a quick step by step for that is be super grateful as Windows 7 (64bit) decided to not have the drivers work anymore from when I flashed my old phone. I've read everything on installing the drivers and tried many different versions of drivers including ones off here. I've tried reinstalling Windows multipul times. I tried using Linux (mint) and virtual machine (xp) but can't get Linux to communicate with the phone. And after using a friends computer and getting the drivers working with win 7 I loaded my old config file for qpst, the config file for qpst for cricket off here, and tweaking different settings, no signal and no 3g.
I've been working on this for several days and am getting tired of having a palm computer that only works on WiFi, so as said, a link for flashing using the phone only or you taking time to write one up, (it doesn't have to be pretty) would have me owing you BIG TIME.
Something else I've noticed on my, "new" used phone is that it runs significantly slower than my old one did. Hitting home key with no widgets running can cause the phone to take a good 5 seconds to load. Hitting the app drawer can take also a good 5 seconds to load all the apps.
BTW ##7786# didn't seem to do anything but I think I edited ##000000# correctly putting my MIN in both fields....unless there's supposed to be a 1 in the begining. Not sure what the data settings are supposed to be.
Calbha said:
Stock Rom.
Yes I did can't remember off the top of my head which prl.
Not sure what the msl code is, if its the same as the MIN that I called cricket for I used the same one as my old phone, should that be different with different phones? (min number)
I did not know that about flashing using only the phone. I'm not sure what is search for, to find that tutorial so if you'd be so kind to link me to one or write a quick step by step for that is be super grateful as Windows 7 (64bit) decided to not have the drivers work anymore from when I flashed my old phone. I've read everything on installing the drivers and tried many different versions of drivers including ones off here. I've tried reinstalling Windows multipul times. I tried using Linux (mint) and virtual machine (xp) but can't get Linux to communicate with the phone. And after using a friends computer and getting the drivers working with win 7 I loaded my old config file for qpst, the config file for qpst for cricket off here, and tweaking different settings, no signal and no 3g.
I've been working on this for several days and am getting tired of having a palm computer that only works on WiFi, so as said, a link for flashing using the phone only or you taking time to write one up, (it doesn't have to be pretty) would have me owing you BIG TIME.
Something else I've noticed on my, "new" used phone is that it runs significantly slower than my old one did. Hitting home key with no widgets running can cause the phone to take a good 5 seconds to load. Hitting the app drawer can take also a good 5 seconds to load all the apps.
BTW ##7786# didn't seem to do anything but I think I edited ##000000# correctly putting my MIN in both fields....unless there's supposed to be a 1 in the begining. Not sure what the data settings are supposed to be.
Click to expand...
Click to collapse
yeah sorry that code is supposed to be ##786#
some of the other codes you might want o use to confirm that your settings are correct are
##786# - EPST - Status Menu
##3282# - EPST - Data Programming Menu (User Name, Advanced, Restore, Enable HFA, DSA Server, MMSC URL)
##3424# - Diagnostic - Connect to phone in diag mode (im sure you already know that one)
##72786# - changes DSA back to Factory
*#*#4636#*#* - Phone Information - "Phone information, Battery information, Battery history, Useage statistics, Wifi information"
thats all i can remember at the moment.
haxin said:
yeah sorry that code is supposed to be ##786#
some of the other codes you might want o use to confirm that your settings are correct are
##786# - EPST - Status Menu
##3282# - EPST - Data Programming Menu (User Name, Advanced, Restore, Enable HFA, DSA Server, MMSC URL)
##3424# - Diagnostic - Connect to phone in diag mode (im sure you already know that one)
##72786# - changes DSA back to Factory
*#*#4636#*#* - Phone Information - "Phone information, Battery information, Battery history, Useage statistics, Wifi information"
thats all i can remember at the moment.
Click to expand...
Click to collapse
*#*#4636#*#* if this can be edited this might be able to be fixed in this menu however upon dialing this the number cleared like it was about to do something but it didn't do anything. was this the correct code?
The code is correct.
Now here is a very handy code but it does not work with every rom. ##775# it allows you to change prls. You will need to know the msl code and if you are on a rooted rom you can use msl reader from the market. You will also need to download cricket prls and put them on your SDcard.
Sent from my PC36100 using xda app-developers app