Has anyone been able to modify the MSL on the Harrier/PPC6600/XV6600 yet?
My unit was on a prepaid Sprint account and I would like to activate it on a Verizon account.
Thanks!
I can change the MSL on the Harrier.
however It may or may not work for you, I dont think Im allowed to post that info due to confidentiality stuff.
so dont pm me, and I wont reply with something to try.
cheers.
:wink:
I have the same issue. I have a Harrier/PPC6600 from Sprint and I want to use it on my Canadian CDMA provider. My provider will not have a problem with the ESN# being clean, but the phone needs to be unlocked to use their PRL. I'm checking with the carrier to see if they can do it or if they purchase their phones elsewhere. If the carrier can do it, great - otherwise I also need a way to unlock the phone.
Thanks
John
Audiovox PPC 6600
ROM: 2.04.00 WWE
Radio: HA00_144
Protocol: AA3.3.301
PRL Version: 30378
ExtROM Version: 2.04.116 WWE
see how rhauff gets along,
if it works for him im sure he'll be able to point you in the right direction.
the other thing to try is a bit of social engineering and ring sprint, ask to speak to there Corporate team and just explain to them that the company you work has a couple of harriers and you want to swap the numbers and could they please send the reprogramming details to you via email,
then explain you will ring the back as soon as the devices get to you (as they are currently in transit) and once you have changed the numbers on them.
it will work.. trust me.
Inane, you are just full of good ideas! I'm still waiting for the battery so I can try the reprogramming, it'll probably be next week before that happens. I will let you guys know how it works out though!
Finally got the batteries last weekend, ordered them from 2mangoes on Ebay and got them direct from China! They seem to be good, perfect fit and last about as expected.
Thanks for your help inane, I did use the MSL access code quite a bit. I think it is safe to post here, I have seen it listed, have not seen it forbidden and it is all over pdaphonehome.com.
Here are my result, this is a copy of my post on pdaphonehome.com:
Well, I had searched and didn't find any success on this. I posed the question hoping somebody had solved this but hadn't posted it yet.
Anyway, I was able to switch this over (only partially at the moment!) using the existing Sprint MSL. A Verizon MSL of 000000 would only be required to do OTA programming (PRL & network info).
My procedure was as follows:
1. Program the PPC6600 with Verizon's radio ROM to support their EVDO PRL.
2. Using ##775#, load Verizon's PRL 50430.prl.
3. Using ##MSL#, change Mobile number (MDN) and MSID. I used my mobile number as the MSID, which I think is correct.
4. Using ##778#, under MSL settings, I changed the SID/NID to 26 which is Verizon's ID for the Mpls/St. Paul market. I don't know if this step was required. As I understand it, Verizon may ignore this, not sure.
Ok, that's pretty much it. Called in and had the ESN activated on my account. They REQUIRED me to put a data plan on, I went with the $0.015/Kb.
Anyway, outbound calling works fine, but inbound lands at my voice mail. Txt messaging no go yet, and no Internet. I did enter my username [email protected] and password=vzw, and set DNS addresses, but still need to get a proper IP for PHA and SHA (still have Sprint's numbers).
Any ideas on what I need to change to make inbound calling to work?
EDIT*************************
OK, solved the outbound (long time ago, actually). I set roaming to HO, home only. Now in and out bound work great. I got data connection working by setting, under 3GDATA1, to "No IP".
i-mate pda2k evdo
How about i-mate pda2k evdo, is this setting work fine on this PDA?
Sorry, can't help you with that. I've only worked on the HTC Harrier.
After you entered the ##775#, it asks for an unlock code. Where to you get the unlock code it is looking for?
Audiovox PPC6600
Originally PH20A2
Rom: 2.04.00
Radio: HA00_144
ERom: 2.04.116
Now PH20A3 with Verizon 2.07.00 update
moving country...unlock PH20A2
Can anyone give a step by step to unlock my i-mate PDA2K EVDO. Model No. PH20A2.
I just moved from Australia to the USA... I love this phone... it keeps me so organized... I just want to keep it to use on the USA CDMA network.
That would be such a help.
i am looking for good SIP service provider whose SIP config have been proven to work seamlessly with hermes mobile 6.1
Try SIPGate.
Thats the one i use.
I have HTC p3600 i am in Toronto Canada with Fido as my cell phone provider. I want to know is any rom provide Enhanced Caller id feature which will work here in canada. please inform
Had no problem with the dutch firmware.
are you sure that you have 3g coverage where you live?
Don't forget to enable "wcdma only" from call settings. It might help.
Hmmm .... I do not have any problems with Diamond, I'm close to BTS with signal level 5 in 3G. So I think there is something with that....
Problem is with Samsung only. Sipdroid is showing more than 95% of lost packets and about 10% late. I have to test this with another firmware... maybe this is a problem.
Thank for suggestion with the change of GSM band - I did this - the same.
PS: no problems with on lin eradio e.g.....
OK - I changed firmware, radio, modem... nothing.
Then I made some additional test using sipdroid on the alternative port - and bang... clean sound... no dropping packets.
It is looking that vodafone.nl is filtering communication on SIP ports like 5060 - they have in rules that voip is not allowed.
The thing is that before with my old contract it was working really perfect without any missed packets.
Question is how it is possible that on HTC Desire in Vodafone as well everything is working fine.
Maybe they have me on the list.... black...
interesting!
which port did you use? i should keep it in mind in case telfort does something similar
I have used port 36999.
The problem is that this port is supported only on pbxes.org - which is not perfect as the SIP provider for my another account.
So now I'm trying to find a good solution - maybe to use siproxd to forward connection to the SIP provider on normal port (5060).
Will see if this si working. For now Vodafone is blocking the SIP and VoIP (what is in their regulation).
I just did a mistake signing contract extension with them. Should choose another provider....
I buy a new HTC Evo, i make it work with Iusacell the CDMA carrier in Mexico, but only can call and send sms (text messages), following a guide for a forum in spanish trying to configure EVDO 3G, but still sending a error something like this:
"Error Code 67. Registration failure. Your PCS Vision username/or password may be incorrect. Please try again"
I think is because the user [email protected] and password and other configurations are wrong.
Someone knows which i should change to make it work?
Thanks
I don't know how to fix your problem, but I can tell you that PCS Vision is a Sprint Network service, so it seems something wasn't done right and your phone is still looking for the Sprint network.
I know is my problem but you know which or how remove or overwrite that settings?
BTW I see other guys who have in ESN 4 zeros, can't did 3G work, any ideas?