[Q] Error flashing recovery.img (CWM v3.0.2.8) - Desire HD Q&A, Help & Troubleshooting

So i currently have ROM Manager v4.0.0.1 (but i havent flashed CWM yet) and ofc S-OFF and rooted, and HBOOT .85 and Stock ROM.
I tried to flash CWM v3.0.2.8 normally but i get this message in FastBoot USB mode
//------------------------------------------------------------------
C:\HTC_Ace\tools>fastboot-windows flash recovery ./recovery.img
sending 'recovery' (4286 KB)... OKAY
writing 'recovery'... FAILED (remote: not allowed)
//------------------------------------------------------------------
so i thought i would manually flash it with a terminal.
i then found out that i didnt have flash_image, so i found a download link and put it in my /system/bin/ file, and typed
//-------------------------------------------------------------------
# flash_image recovery /sdcard/recovery.img
error scanning partitions
//-------------------------------------------------------------------
any solutions?, for the first or second problem?, i just want CWM -
::and side note, can i access the original HTC Bootloader with this installed?

Do you have ENG S-OFF? Regular S-OFF doesn't cut the mustard when it comes to flashing via fastboot.

I think I do!, I used the easy radio software thingy when I rooted, so I presume so.
Sent from my Desire HD

Double check your CID in "System Info" in the bootloader. Does it Read CID: 11111111

there are only 4 options in the bootloader, i cannot see the "system info" option

If you cannot see "System Info" then you don't have ENG S-OFF, Just use THIS tool and you'll have it in no time.

Guys, no one tried to install recovery.img by replacing the same file in the firmware?
Sent from my Desire HD using XDA App

If you cannot see "System Info" then you don't have ENG S-OFF, Just use THIS tool and you'll have it in no time.
Click to expand...
Click to collapse
yo, so i did internet pass through on my phone and click 'flash ClockworkMod Recovery' in ROM Manager, and it installed v3.0.2.6.
My question is, if my phone didnt have ENG S-OFF the flash recovery that ROM Manager did; wouldnt have worked right? - its written in the last detailed process in the link you provided to me andy.

No with S-off rom manager can flash a recovery, but you can't flash via fastboot.

Related

Need Help: Restoring Nandroid backup from PC [SOLVED]

Hello Everyone
I tried something stupid and now my Desire doesn't boot anymore. I have made a Nandroid backup, but I am unable to restore with my device, because I don't seem to have the ClockworkMod Recovery
I can go to the screen with the 3 skateboarding androids, but when I choose recovery, It goes to "Android system recovery <2e>". There doesnt seem to be an option to restore Nandroid backups there.
What's the easiest way to restore my backup? I can access my SD-card on my PC.
Or maybe it is easier just to install a random fresh ROM and from there restore my nandroid backup? (but I don't know how to do that from the recovery screens I have access to)
PS: I already tried some things on I found on google, I tried restoring using fastboot method, but get this message:
c:\Android>fastboot flash system system.img
sending 'system' (232637 KB)... FAILED (remote: data length is too large)
Please help, Thanks!
Edit: Tried to manually 'install' ClockWorkMod Image 2.5.0.7 with fastboot... I get the following error:
c:\Android>fastboot flash recovery recovery-clockwork-2.5.0.7-bravo.img
sending 'recovery' (4216 KB)... OKAY
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
You need to be s-off to be able to use those fastboot commands. Have you tried reflashing a custom recovery with unrevoked? Otherwise you probably need to use a Ruu and root again.
Sent from my HTC Desire using XDA Premium App
Hi, Thanks
you're right, I do have S-On
I also have H-boot 0.75
(Radio-5.11.05.27 just to be complete)
What do I need to do first? Remember that I am stuck on the HBoot screen (3 skateboarding androids).
Can I get S-off from here and flash ClockworkMod Recovery? Or do I need to flash a RUU Rom first?
Also do I need to update HBoot to 0.80?
And are 'HBoot drivers' the same as the 'Fastboot/ADB drivers' ?
Need more help please. Most tutorials start with a working phone
Thanks!
Need some help guys please, Everything I try doesn't seem to work.
I figured out my phone is stuck in HBOOT with USB debugging disabled. Because Unrevoked doens't recognize my phone. Next step was to try and install a RUU. But the version I needed is corrupt. (I think) I downloaded twice and it just doens't work, I get an error even before the program loads.
I downloaded from RUU_Bravo_Froyo_HTC_WWE_2.29.405.2_Radio_32.49.00.32U_5.11.05.27_release_151783_signed here: http : / / shipped-roms . com/shipped/Bravo/
Should I maybe try another RUU? Maybe 2.29.405.5 ? Or is that not safe?
Grtz!
Solved,
xda forum member EddyOS pointed me to this RUU http://www.multiupload.com/LEJCW182AH
(filename: RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed)
Thanks!

[Q] Bricked or is there still hope?

I'm messing around since 3 days with a non working Desire.
I was trying to root that Vodafone UK Branded Phone with a goldcard, but it somehow did't really work stable.
So I managed it to install a RUU in order to revert it and begin the Process from the beginning on:
1.This was the RUU, and everything went fine: RUU_Bravo_Froyo_Vodafone_UK_2.33.161.2_Radio_32.49.00.32U_5.11.05.27_release_157522_signed
2.Then I tried to downgrade my HBOOT from 0.93.0001 to 0.80 using the method in this thread (with goldcard!)
3. During the installation of the PB99IMG.zip something went wrong and (maybe a mismatch with goldcard or the mtd0.img, i still don't know / understand) HBOOT could not be updated and RADIO-V2 also
4. now I cant boot the Phone at all or issue adb commands (I think the phone needs to be fully booted and USB-debbug-enabled for this) so I cant follow any of the solutions wich I found in the last two days. A PB99IMG.zip is also not flashable in HBOOT since it just cancels after "Checking..[PB99IMG.zip]" and returns back to the HBOOT screen.
Here's my phones specs:
CID: VODAP102
PVT4
S-ON
HBOOT 0.93.0001
MICROP-051d
SLCD
RADIO 5.11.05.27
If someone has an idea where to start, any help would be greatly apreciated. If someone is even willing to assist via instant messaging or skype I would be happy to compensate his time with a donation via paypal! Thank you in advance!
EDIT: SOLVED!!!
cosine83 from the unrevoked IRC channel solved it for me!!
I was able to enter RUU mode and flash the PB99IMG.zip in 2 quick steps!
In fastboot mode:
1.fastboot oem rebootRUU
2.fastboot flash zip PB99IMG.zip
huge thanks!!!
Hello sorry for that
but the good news is your phone is not dead, do you red this
http://forum.xda-developers.com/showthread.php?t=750888
I think your fix is here : http://forum.xda-developers.com/showthread.php?p=7602850#post7602850
hope it can help you
what happens if you hold vol down + power when the phone is off?
Good idea. I forgot to ask
Sent from my HTC Desire using XDA Premium App
Droidxda said:
Hello sorry for that
but the good news is your phone is not dead, do you red this
http://forum.xda-developers.com/showthread.php?t=750888
I think your fix is here : http://forum.xda-developers.com/showthread.php?p=7602850#post7602850
hope it can help you
Click to expand...
Click to collapse
Trying this right now, almost gave up on this...
vol down + power brings me to the regular hboot manu and i can also enter fastboot...
Regular 0.93 ?
Do you try unrevoked?
Sent from my HTC Desire using XDA Premium App
Droidxda said:
Regular 0.93 ?
Do you try unrevoked?
Sent from my HTC Desire using XDA Premium App
Click to expand...
Click to collapse
for unrevoked I need my phone booted up and have debugging enabled as far as i know, but I cant boot it...
EDIT: I followed your guide from HERE but the result is still the same. I am not able to flash the PB99IMG.zip HBOOT reads it (the blue bar on the right top goes all the way up but then comes "Checking..[PB99IMG.zip]" and the procedure just aborts.
I think it must have something to do with a wrong mtd0.img which was flashed during my first attempt to downgrade (mybe not matching the PB99IMG???) or there is a problem with the goldcard (i am very certain that I did everythin correct with the gc, did it manually and also tith the gc-maker)
On the fastboot menu, could you access a recovery?
Sent from Desire Bravo with xda App. Leedroid ROM HD port inside.
Droidxda said:
On the fastboot menu, could you access a recovery?
Sent from Desire Bravo with xda App. Leedroid ROM HD port inside.
Click to expand...
Click to collapse
well I can select the "recovery" from the Hboot menu and also try flashing an update.zip, but every time I do this I get:
E:failed to verify whole-file signature
E:signature verifivation failed
Installation aborted
The best way should find a correct hboot P99IMG.zip and put it on the SD
Should ask to unrevoked team by the irc channel.
Sent from Desire Bravo with xda App. Leedroid ROM HD port inside.
cgorki said:
well I can select the "recovery" from the Hboot menu and also try flashing an update.zip, but every time I do this I get:
E:failed to verify whole-file signature
E:signature verifivation failed
Installation aborted
Click to expand...
Click to collapse
**** I know this message, but I can't remember.
EDIT - hboot 0.93 ?
Sent from Desire Bravo with xda App. Leedroid ROM HD port inside.
I thought it wasn't possible to change hboot until you s-off? or does a goldcard make it possible when s-on?
if you can access the bootloader menu (vol down + power) then you should be able to fix your phone.
Do you try to install an ruu Rom?
Sent from Desire Bravo with xda App. Leedroid ROM HD port inside.
Boot the phone into bootloader menu.
connect usb cable.
in command prompt load the SDK folder, instead of typing adb.exe type fastboot.exe.
place the hboot you want into the "platform-tools" folder in the SDK directory - if its in the pb99img.zip then extract the .img file from there and place just that file into the folder.
type "fastboot flash hboot *name-of-file.img*"
if this works then type
type "fastboot reboot-bootloader"
type "fastboot erase cache"
Not sure it will work though as you are S-ON.
However you should be able to flash a recovery through the same way, type "fastboot flash recovery *name.img*". Not sure if this will help fix it, but if you can access recovery then its a start! Obviously you'll need to download a recovery first and place it into the platform-tools folder.
himeshladva said:
Boot the phone into bootloader menu.
connect usb cable.
in command prompt load the SDK folder, instead of typing adb.exe type fastboot.exe.
place the hboot you want into the "platform-tools" folder in the SDK directory - if its in the pb99img.zip then extract the .img file from there and place just that file into the folder.
type "fastboot flash hboot *name-of-file.img*"
if this works then type
type "fastboot reboot-bootloader"
type "fastboot erase cache"
Not sure it will work though as you are S-ON.
However you should be able to flash a recovery through the same way, type "fastboot flash recovery *name.img*". Not sure if this will help fix it, but if you can access recovery then its a start! Obviously you'll need to download a recovery first and place it into the platform-tools folder.
Click to expand...
Click to collapse
doubt that this will work with s-on, but trying anyways!!
thank you!
cgorki said:
doubt that this will work with s-on, but trying anyways!!
thank you!
Click to expand...
Click to collapse
would probably give the recovery option a go first..
himeshladva said:
would probably give the recovery option a go first..
Click to expand...
Click to collapse
C:\1>fastboot flash recovery cwm.img
sending 'recovery' (3366 KB)... OKAY [ 0.488s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.958s
EDIT: Is there a way to issue ADB commands to the phone without having it booted up?
cgorki said:
C:\1>fastboot flash recovery cwm.img
sending 'recovery' (3366 KB)... OKAY [ 0.488s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.958s
EDIT: Is there a way to issue ADB commands to the phone without having it booted up?
Click to expand...
Click to collapse
You can if you are able to access recovery.. or try to just turn the phone on and see.
Also, take a read through this.. maybe it will help.
http://www.askabouthugo.com/general...n-fastboot-with-remote-signature-verify-fail/
Not sure what else can be done if that doesn't help.
Would be best to join unrevoked IRC channel as they would know a lot more about it..
himeshladva said:
Not sure what else can be done if that doesn't help.
Would be best to join unrevoked IRC channel as they would know a lot more about it..
Click to expand...
Click to collapse
I'm talking to some of the guys from the IRC, so far no solution in sight. Maybe tomorrow there are some ppl online who are familiar with the HTC Bravo GSM...

[DEV] Possible S-OFF using HTCdev for WFS A510e

Hi guys,
A good friend of mine recently requested me to help with rooting her Wildfire S A510e (purchased from SingTel, CID HTC__044). I managed to change her Wildfire S from S-ON to S-OFF via HTCdev. As far as I know, HTCdev isn't supposed to give you S-OFF but only to remove the NAND write locks on certain partitions.
Users: This is NOT for you. This is NOT a tutorial.​I will not be responsible for any bricked WFS.​
Here's what happened, pretty long so I'm gonna break it down into multiple sections. Important points in red.
Replacing SingTel ROM with HTC EU ROM
The phone was originally running Android 2.3.3, ROM version 1.35.707.1, HBOOT 0.90.0000. This ROM version is not supported by HTCdev unlock yet.
Reboot to HBOOT on WFS. Choose FASTBOOT.
Connect WFS to computer via USB.
Downloaded the HBOOT RUU for "hTC Asia India" from HTCdev. Attempted to install the RUU but got a CID error.
Disconnected WFS from computer.
Rebooted normally on WFS.
Connect WFS to computer via USB (Disk Drive).
Created a goldcard by using SimpleGoldCard while WFS is mounted as Disk Drive. (this wipes your SD card)
Disconnect WFS from computer and reboot.
Connect WFS to computer via USB (Disk Drive).
Downloaded RUU_Marvel_S_HTC_Europe_2.13.401.2
Ran the RUU. Went into %temp%, found the relevant directory and copied rom.zip to the goldcard as PG76IMG.zip.
Disconnect WFS from computer.
Turn off WFS and rebooted into HBOOT.
Went into HBOOT -> Fastboot. RUU_Marvel_S_HTC_Europe_2.13.401.2 was installed successfully (Android 2.3.5, ROM version 2.13.401.2, HBOOT 0.90.0000).
Installing HTCdev Unlock
Rebooted WFS into HBOOT.
Connect WFS to computer via USB.
Downloaded the HBOOT RUU from HTCdev for "HTC EU".
Ran the HBOOT RUU. RUU installation gets stuck at 50% ("Flushing radio...") for about 20 minutes.
Decided that the RUU has hung so disconnected WFS from USB and did a battery pull
RUU offered to do a recovery but I clicked "Exit".
Turn on WFS in HBOOT mode.
S-OFF obtained!
I was pretty much at "dafuq?" at this stage. I didn't even need to upload the device identifier to HTCdev to get an unlock key. The device was already S-OFF (HBOOT shows it)!
HBOOT remained at 0.90.0000.
I verified the S-OFF by flashing ClockWorkMod which went without issues.
Possible theory of operation: (just my thoughts)
The HTCdev HBOOT RUU provides a temporary S-OFF in order to unlock the NAND
When the RUU is done, it is supposed to restore S-ON to the device.
However, since the process was hung, the RUU had no chance of restoring the device to S-ON.
Hence the WFS was left at S-OFF.
If there are any adventurous devs around who are willing to try to dissect the RUU, please do so, but standard disclaimer applies. Attempting to interrupt the HBOOT RUU flashing is pretty dangerous and WILL possibly brick your device! I will not be held responsible if you brick your WFS!
This seems to be a case of pure luck.
Addendum:
The HBOOT RUU contains 2 ZIP files: rom_01.zip, rom_02.zip
They are presumably flashed in-order.
rom_01.zip contains Radio_special_MARVEL_MR_47.23b.35.3035_7.54.39.08M_Signed_20111208.img
rom_02.zip contains hboot_1.08.0099_6e20b6fac09.nb0 and radio_47.23a.35.3035H_7.53.39.03M_MR.img
My friend has radio version 47.23b.35.3035_7.54.39.08M. From here, we can tell that rom_01.zip was successfully flashed but rom_02.zip wasn't. Also notice the "special" file name of the first radio image.
Addendum 2:
It appears that both radio ROMs have the same size but different md5sum. Can someone with S-ON try to flash Radio_special_MARVEL_MR_47.23b.35.3035_7.54.39.08M_Signed_20111208.img? (Again, standard disclaimer applies)
i like the very last sentence that you used ...
good job anyway mate !
how do you go about flashing a radio??
---------- Post added at 04:12 AM ---------- Previous post was at 04:09 AM ----------
rom1.zip is 10.370.252
rom2.zip is 10.586.425
ie not the same size
stevie67 said:
rom1.zip is 10.370.252
rom2.zip is 10.586.425
ie not the same size
Click to expand...
Click to collapse
If you look into the ZIP files, Radio_special_MARVEL_MR_47.23b.35.3035_7.54.39.08M_Signed_20111208.img and radio_47.23a.35.3035H_7.53.39.03M_MR.img are both the same size.
Reboot to HBOOT, choose FASTBOOT, connect WFS to computer. Use "fastboot flash radio Radio_special_MARVEL_MR_47.23b.35.3035_7.54.39.08M_Signed_20111208.img".
ok i tried to flash this radio i put the .img file on my sdcard went to fastboot then recovery,install from sdcard and there was nothing there so i put the rom1.zip folder on my sdcard went to fastboot,install from sdcard,rom1.zip and got this
CWM-based Recovery v5.0.2.6
-- Installing: /sdcard/rom_01.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/rom_01.zip
(bad)
Installation aborted
did i do something wrong??
You must flash the radio with fastboot command. But this wont work, bc the hboot will check if the file is signed. And that isn't.
But try, maybe i'm not right.
Sent from my HTC Wildfire S A510e using XDA App
and the fastboot command is??
and the file says its signed
Reboot to HBOOT, choose FASTBOOT, connect WFS to computer. Use "fastboot flash radio Radio_special_MARVEL_MR_47.23b.35.3035_7.54.39.08M_Signed_20111208.img".
Click to expand...
Click to collapse
He said it
Sent from my HTC Wildfire S A510e using XDA App
My phone wouldn't update using the HTC method so I extracted the two ROMs from the RUU and flashed them seperately. After the first one (radio) I noticed that the phone was S-OFF but when I'd flashed the second it was S-ON again and I couldn't go back.
WOW, you have S-OFF after flashing radio via
fastboot flash radio radio.img
???
And now you can't go back?
I extracted the htcdev ruu and tried to flash the radio image. but it is not possible, signature check fails. so if the bootloader is already unlocked, it is not possible to obtain s-off this way
Have u test it with
fastboot oem lock
first and then to flash the radio.img?
Or to try to downfrade hnoot with the tutorial here in forum and then flash the new radio.
not yet. Will try that and report again
did relock phone using oem lock.
*** RELOCKED ***
Tried flashing 1st radio from htcdev ruu
flashing successful, but still S-ON
Hmm, and can u try to downgrade to Hboot 0.9 or Hboot 1.08?
I'm a noob so it's possible I made a mistake but I'm pretty sure I was S-OFF after the first flash. I was on Hboot 0.09.0000. Unfortunately I didn't realise the significance at the time so proceeded anyway.
I will try
I will try too, but earliest tomorrow, then i have my windows pc
this is what i get with or without bootloader locked
C:\Android>fastboot flash radio Radio_special_MARVEL_MR_47.23b.35.3035_7.54.39.0
8M_Signed_20111208.img
sending 'radio' (23936 KB)...
OKAY [ 5.375s]
writing 'radio'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 13.063s
stevie67 said:
this is what i get with or without bootloader locked
C:\Android>fastboot flash radio Radio_special_MARVEL_MR_47.23b.35.3035_7.54.39.0
8M_Signed_20111208.img
sending 'radio' (23936 KB)...
OKAY [ 5.375s]
writing 'radio'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 13.063s
Click to expand...
Click to collapse
I extracted the rom1.zip and renamed it PG76IMG.zip and flashed via hboot. this worked when the phone was re-locked
theq86 said:
I extracted the rom1.zip and renamed it PG76IMG.zip and flashed via hboot. this worked when the phone was re-locked
Click to expand...
Click to collapse
so are you now s-off??

[Q] how to gain soff on rooted wildfire with unlocked bootloader

i just unlocked my wildfire from htcdev method. now l i have a wildfire with son and unlocked bootloader and hbot version 1.20.0000.. i used htcsupertool to root the phone completely and i got superuser installed in it, i tried to gain soff with it but it didn't allowed me to get soff and it showed a error and then it redirect me to htc dev website...
i want to flash "cyanogenmod". last not the least i rooted the wildfire for overclocking the cpu. i came to know that i have to flash the kerenal for the same . but i nowhere able to find any solution for this. now i have rooted wildfire with "s on".. tell me how to gain soff and how to overclock the cpu. i am still on custom rom. is there is anyway to gain complete soff and anysoftware to just intall cyanogenmod on my wildfire.. i searched almost all threats but i vain unable to understand how to gain soff..
can buzzdowngrade utility can help to gain soff.. please tell me any method to gain soff with minimum damage possibilities
Its not necessary to get S-OFF if you want to install custom ROMs or install overclock capable kernels. All you need is a Custom Recovery called ClockworkMod Recovery. You can flash Clockworkmod Recovery via Fastboot using this post as a guide:
- Download this attachment and extract it to any folder (eg: C:\fastboot)
http://forum.xda-developers.com/atta...1&d=1308537074
- Download CWM IMG Image for Wildfire (Buzz) from here:
http://download.clockworkmod.com/rec...0.2.0-buzz.img
- Place that IMG file along with the 4 files from the attachment in the same folder you created
- Now, turn off your Wildfire, connect to PC, and turn on in HBoot
- Navigate to Fastboot and Select it
- Open a Command Prompt Window (Start > Run > cmd)
- Type the following one by one and press Enter (It is assumed you created the folder in C Drive and have named it fastboot)
- cd\
- cd fastboot
- fastboot flash recovery recovery-clockwork-5.0.2.0-buzz.img
- This should produce 2 lines of code - SENDING RECOVERY and WRITING RECOVERY. If both states OK at the end, you should have CWM installed successfully after this.
Once you have CWM installed, follow this post to install Custom ROMS / Kernels:
http://forum.xda-developers.com/showpost.php?p=8926457&postcount=4
However, if you necessarily want S-OFF, then yes, the BuzzDowngrade method posted by ieftm should work. That will get your HBoot to 1.01.0001, and then you can use Revolutionary to gain S-OFF.
No need of s -off
right now i m using an unlocked wildfire with s- on and cyanogenmod 7.01 in it.
just download ROM manager from android market and then download stabel release from cyanogen official site. copy to root of sd card . go to bootloader menu and install it
reply
as u told me to flash the go to the fast bot mode..i did whatever you told me in the reply to do. i did exactly the same procedure that you told me to do. but in the end there is a error came it was:
C:\fastboot>fastboot flash recovery recovery-clockwork-5.0.2.0-buzz.img
sending 'recovery' (3032 KB)... OKAY [ 0.936s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.716s
now please help me.
i am attaching the image below also..
pls do reply i left a reply for u down below.. i posted this thing coz of mistake
pls reply sorrie
3xeno said:
Its not necessary to get S-OFF if you want to install custom ROMs or install overclock capable kernels. All you need is a Custom Recovery called ClockworkMod Recovery. You can flash Clockworkmod Recovery via Fastboot using this post as a guide:
- Download this attachment and extract it to any folder (eg: C:\fastboot)
http://forum.xda-developers.com/atta...1&d=1308537074
- Download CWM IMG Image for Wildfire (Buzz) from here:
http://download.clockworkmod.com/rec...0.2.0-buzz.img
- Place that IMG file along with the 4 files from the attachment in the same folder you created
- Now, turn off your Wildfire, connect to PC, and turn on in HBoot
- Navigate to Fastboot and Select it
- Open a Command Prompt Window (Start > Run > cmd)
- Type the following one by one and press Enter (It is assumed you created the folder in C Drive and have named it fastboot)
- cd\
- cd fastboot
- fastboot flash recovery recovery-clockwork-5.0.2.0-buzz.img
- This should produce 2 lines of code - SENDING RECOVERY and WRITING RECOVERY. If both states OK at the end, you should have CWM installed successfully after this.
Once you have CWM installed, follow this post to install Custom ROMS / Kernels:
http://forum.xda-developers.com/showpost.php?p=8926457&postcount=4
However, if you necessarily want S-OFF, then yes, the BuzzDowngrade method posted by ieftm should work. That will get your HBoot to 1.01.0001, and then you can use Revolutionary to gain S-OFF.
Click to expand...
Click to collapse
please reply stuck with error.
you didn't gave any reply as i asked you, in the above question and i have also send you two images in this...

[Q] After downgrade touch don't work

My HTC wildfire touch don't work after downgrade from 2.34.186.1 to from 2.34.186.1.
The branding ist 1und1. After this i try to find the original OTA 2.34.186.1 to upgrade
to the old one that was on the phone before. - no way - i don't found
After this i unlocked the bootloader and i think that there is a way to upgrade any firmware
but its not possible.
My bootscreen:
*** UNLOCKED ***
BUZZ PVT SHIP S-ON
HBOOT-1.02.0000
MICROP-0622
RADIO-3.35.15.31
Dec 13 2011,12:08:54
The HTC boot normaly to the lock screen but the touch don't work.
Anyone an idea to solve my problem an install another rom?
Here is another thread that discusses a similar issue.
Hope it'll help.
http://forum.xda-developers.com/showthread.php?t=1056767
Sent from my G9 using Tapatalk
Pretendde said:
My HTC wildfire touch don't work after downgrade from 2.34.186.1 to from 2.34.186.1.
The branding ist 1und1. After this i try to find the original OTA 2.34.186.1 to upgrade
to the old one that was on the phone before. - no way - i don't found
After this i unlocked the bootloader and i think that there is a way to upgrade any firmware
but its not possible.
My bootscreen:
*** UNLOCKED ***
BUZZ PVT SHIP S-ON
HBOOT-1.02.0000
MICROP-0622
RADIO-3.35.15.31
Dec 13 2011,12:08:54
The HTC boot normaly to the lock screen but the touch don't work.
Anyone an idea to solve my problem an install another rom?
Click to expand...
Click to collapse
Hmmm. This is going to be hard to get out of as you upgraded your Hboot. Does the phone still register fastboot commands? Also what downgrade thread did you follow?
Sent from my HTC Sensation using Tapatalk
It dont work at update with ruu shows the version 2.46.0.0 of the divece rom....
The update prozess stops and there is " FEHLER [155] : ABBILD-UPDATE-FEHLER " (IMAGE UPDATE ERROR)
The same with the PC49IMG.zip on microsd card:
RUU
Security fail!
Update Fail!
Pretendde said:
It dont work at update with ruu shows the version 2.46.0.0 of the divece rom....
The update prozess stops and there is " FEHLER [155] : ABBILD-UPDATE-FEHLER " (IMAGE UPDATE ERROR)
The same with the PC49IMG.zip on microsd card:
RUU
Security fail!
Update Fail!
Click to expand...
Click to collapse
That's not what I mean, to unlock your bootloader you would have had to issue the command fastboot OEM unlock, or fastboot flash OEM unlock unlock_token.bin or something similar. These types of commands are the ones I'm interested in I want to see if you can flash clockworkmod recovery pal.
Sent from my HTC Sensation using Tapatalk
I downgraded with the standard buzzdowngrade.zip package, step1 but the goldcard-step fail.....i flashed after hboot downgrade RUU_Buzz_Vodafone_DE_1und1_1.19.186.3_Radio_13.45.55.24_3.35.15.31_release_133745_signed.exe
Than was the problem with the touch ... it dont work.
After this i tryed many ruu's ....no way.
Than i downloaded from htcdev - PC4910000_Buzz_Froyo_hboot_1.02.0000_R3.exe and flashed and unlocked with Unlock_code.bin
I was thinking i would be able to unlock and update every rom
Pretendde said:
I downgraded with the standard buzzdowngrade.zip package, step1 but the goldcard-step fail.....i flashed after hboot downgrade RUU_Buzz_Vodafone_DE_1und1_1.19.186.3_Radio_13.45.55.24_3.35.15.31_release_133745_signed.exe
Than was the problem with the touch ... it dont work.
After this i tryed many ruu's ....no way.
Than i downloaded from htcdev - PC4910000_Buzz_Froyo_hboot_1.02.0000_R3.exe and flashed and unlocked with Unlock_code.bin
I was thinking i would be able to unlock and update every rom
Click to expand...
Click to collapse
Ok so fastboot works, good good. Do you have clockworkmod recovery installed? If not follow my thread for rooting hboot 1.02.0000 and install clockworkmod but go no further.
Also just for your information the ruu will not install because of
1. Your honor is higher than the ones in the RUU,
2 your bootloader is unlocked.
We need to downgrade you to the WWE rom with hboot 1.01.0001 and hopefully that will restore your touch panel to working order
Sent from my HTC Sensation using Tapatalk
Clockworkmod recovery is installed, rooting hboot 1.02.0000 o.k.
and now?
Pretendde said:
Clockworkmod recovery is installed, rooting hboot 1.02.0000 o.k.
and now?
Click to expand...
Click to collapse
ok so what we want to do know is downgrade your hboot to 1.01.0001 so to do that we need your misc partition to be edited. as such i would like you to boot the phone into clockworkmod recovery and connect it to the pc with a usb cable. windows should install the drivers if it has not done so already.
next you will need to set up your command prompt for using adb/fastboot commands.
then we will pull a copy of your misc partition to your sdcard and then copy it into your windows adb folder.
then you will upload that image to me, i will make the necessary changes and then re-upload for you.
then you will flash it to the phone all going well, re-lock your bootloader and then downgrade your hboot and rom and hopefully regain touch input
then as an extra if you want to use a rooted version of that german ruu you were trying to flash i can make you a "safe to flash" version
ok, so....
step 1. Connect your wildfire up to your pc In clockworkmod recovery mode.
step 2. open a command prompt within your adb/fastboot folder. (the same one you used to flash clockworkmod recovery)
step 3. enter the following commands one at a time. copy paste is recommended.
Code:
adb shell
su
cat /dev/mtd/mtd0 > /sdcard/misc.img
exit
exit
adb pull /sdcard/misc.img misc.img
step 4. Upload this file to somewhere like dropbox or media fire and then send me a link to it.
in command prompt
su
/sbin/sh: su: not found
what i do wrong?
Pretendde said:
in command prompt
su
/sbin/sh: su: not found
what i do wrong?
Click to expand...
Click to collapse
OK just skip that and move onto the next bit.
Sent from my Nexus 7 using Tapatalk
I attached this file here, i hope it is o.k.
It takes a while until i found out to mount the SD card before
Pretendde said:
I attached this file here, i hope it is o.k.
It takes a while until i found out to mount the SD card before
Click to expand...
Click to collapse
okey dokey, here is your new misc image. extract it into your adb folder.
i have edited this so it will re-lock your bootloader automatically once you have flashed it. one problem solved
also download this package, it has some tools you will need and the WWE rom you need to flash
lastly we need to make a goldcard. this will be hard given that your touch screen is non-functional. as such you will need a different, working android phone and YOUR sdcard. this trick is sdcard specific so dont swap them about
ok once you are ready with the right stuff, do these steps.
step 5. now we need to make a gold card. if you already have one, you can skip this part. first using your working android phone, download and install Goldcard helper from the android market. Run the app and copy down your SD cards reverse cid. double check it
step 6. now go to this website here and enter in your reverse cid. it will then let you download a goldcard.img.
step 7. now go back to the package you downloaded earlier with the WWE rom (named 1.01.zip) in it and run the goldcardtool.exe, this will flash the goldcard to your sd card. Warning! this will format your card!! in order to achieve this you will have to mount the sdcard from clockworkmod recovery to the computer, use mount usb storage and not mount sdcard.
step 8. once that is done we are now ready for the final push
Now the gold card is ready, i leave al the data on the goldcard, its not been formatted. Goldcard tool says, G: Goldcard is now ready.
The new misc image, must be copy to the phone ?
Pretendde said:
Now the gold card is ready, i leave al the data on the goldcard, its not been formatted. Goldcard tool says, G: Goldcard is now ready.
The new misc image, must be copy to the phone ?
Click to expand...
Click to collapse
ok from here copy the Nmisc.img to your sdcard and do not rename it, leave it on the sd card within no folders.
then connect up the phone in clockworkmod recovery again, and mount the sdcard with mount sdcard and not usb mass storage.
lastly make sure that the 1.01.zip is in your adb folder.
issue the following commands.
Code:
adb shell
(your shell symbol should be a #)
flash_image misc /sdcard/Nmisc.img
exit
(now it should not be a #)
adb reboot bootloader
The phone should not reboot into bootloader and should say at the top locked OOW.
This is ok, if it does not say this then your misc image was not flashed.
if all is well issue these commands.
Code:
fastboot oem rebootRUU
fastboot flash zip 1.01.zip
This will state an error, and that it needs to be reflushed. this is what we want, if any other issue your goldcard may have failed.
repeat the last command to reflush.
Code:
fastboot flash zip 1.01.zip
(this will take a while.)
fastboot reboot
the phone should reboot into the WWE stock rom and hopefully your touch screen will be working again. if it is proceed to s-off with revolutionary here ignore all but revolutionary and then if you want the german ruu as a safe flash rom send me a link to the ruu and I will make it. but it make take a few days.
im at work atm so my replys will be delayed pal, good luck
INFOsignature checking...
INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 63.656s
i flashed 3 times....
Pretendde said:
INFOsignature checking...
INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 63.656s
i flashed 3 times....
Click to expand...
Click to collapse
Your gold card has failed. Format the sdcard and then reissue the fastboot commands.
Sent from my HTC Sensation using Tapatalk
Yes the goldcard was bad, now its okay but n ow a new error :
INFOsignature checking...
FAILED (remote: not allowed)
finished. total time: 56.078s
flashed 5 times ...same error
Pretendde said:
Yes the goldcard was bad, now its okay but n ow a new error :
INFOsignature checking...
FAILED (remote: not allowed)
finished. total time: 56.078s
flashed 5 times ...same error
Click to expand...
Click to collapse
Does your bootloader still say locked?
Sent from my HTC Sensation using Tapatalk
heavy_metal_man said:
does your bootloader still say locked?
Sent from my htc sensation using tapatalk
Click to expand...
Click to collapse
yes
*** locked (00w) ***

Categories

Resources