Related
I just had a tinkering revelation and ended up making something in 30 seconds that i have been looking for for weeks.
Originally inspired by the car dock epoplive made as well as khaaan on Overclockers UK forums, I cut out the intermediary step of finding a case that the phone can snap in and out of easily. I ordered a suction cup mount for a Garmin Nuvi 205 off ebay for $4:
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270626403250&ssPageName=STRK:MEWNX:IT#ht_2572wt_1137
When I got it this afternoon, I took a look at the clip that is meant to hold the Garmin unit and thought that it looked quite close to the dimensions of the Captivate. Holding the phone in it, it was about 1/2" - 3/4" too wide. So I simply took a lighter, slowly and gently heated up the corners of the clip, and bent them slightly inwards. Out of luck, my guesswork bending resulted in a perfect fit. I added some thin sticky-back foam strips to make the fit more secure, and that's it!
The phone snaps in with purpose and is held in place even as I flail about testing it. It looks super clean, works well, was easy to make and cost a total of $4.
(The pictures were taken with my old E71x; when I find the charger for my point-and-shoot, I can get some better quality pictures up.)
Follow-up videos
For a little more detail and viewing angles:
http://www.youtube.com/watch?v=qcB3DQ8JKM0]
and my flail test, if any of you doubt how secure this is:
http://www.youtube.com/watch?v=igZ9sPxPG2k
Enjoy! I am happy to hear any criticism, answer and questions, etc.!
Nice! I'm doing one too!
Great mount.
I think you did a great job. I've been looking for one for a while. What if you have a silicon case? Would it still lock?
If so, you wouldn't need the foam.
stanggman75 said:
I think you did a great job. I've been looking for one for a while. What if you have a silicon case? Would it still lock?
If so, you wouldn't need the foam.
Click to expand...
Click to collapse
That was one of my first thoughts. I just returned my bodyglove case, but it seems like it would work just as well, you will just need to bend the clip just a little bit less to compensate. One thing I should tell you, you may need to modify the clip in such a way that the ridges that hold the device are further *out* to compensate for the added depth of a silicon case too.
Nice! Good job.
Nice! I may have to go get a new car clip to try this. It's kind of funny, because the first thing I thought about the clip was 'Boy, this sure is close to the size of the phone, if only it was just a bit smaller'.
Does the phone stay in when you rotate it?
Yes! I just drive for about a half hour on back roads with the phone in portrait and it didn't move one bit. Did you see my "flail test" video?
awesome!
Exactly what I was looking for.
I'm interested to see if someone gets this working with the bodyglove silicone case...
If i can find a Garmin dock for an acceptable price on Amazon or in person, then ill give this a try.
Great work guy.
Sent from my SAMSUNG-SGH-I897 using XDA App
Car Mount
If you are lazy like me have a look on Ebay. There is 1 for $7.99 shipped with battery charger.
BigJayDogg3 said:
If i can find a Garmin dock for an acceptable price on Amazon or in person, then ill give this a try.
Click to expand...
Click to collapse
So is ebay out of the question for you? There are plenty for sub-$3 on there.
I looked at Staples a couple weeks ago and they have just the ball joint and suction cup (no actual clip) for I think $14.99 - outrageous.
Awesome! I just order two. Thanks for the tip!
Does this scratch the sides at all from being clipped in and out so often or did you put foam on the clips where the phone would touch as well?
just ordered one... think i will pop off the ball joint and drill a screw through the center and attach to my pivoting blackberry 9700 proclipusa mount in my car. That way i got the pivot and it is mounted and not on the glass.
will update with pictures... will probably still order the proclip when it is released...
Surprisingly enough, it is out of the question. I've no credit card. With amazon i can use a coinstar to create gift cards. And in person i can use cash or a check.
Sent from my SAMSUNG-SGH-I897 using XDA App
penguin6 said:
Does this scratch the sides at all from being clipped in and out so often or did you put foam on the clips where the phone would touch as well?
Click to expand...
Click to collapse
No foam on the clips. The plastic is smooth, since it is where the gps would clip in. I don't see any trace of damage in the phone (and believe me, I would notice. Still babying this phone)
BigJayDogg3 said:
Surprisingly enough, it is out of the question. I've no credit card. With amazon i can use a coinstar to create gift cards. And in person i can use cash or a check.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
If you have a bank account, papal can use that.
Krad said:
That way i got the pivot and it is mounted and not on the glass.
Click to expand...
Click to collapse
I dont fully understand what you mean. Mounted on what glass?
Alternatively, i can be patient and wait for the promised pictures.
I have seen the new accessories released from Motorola, but I think that the Portfolio Case just looks hideous. Has anyone seen a portfolio case similar to the official Apple iPad case (http://www.bestbuy.com/site/Apple®+-+iPad+Case/1271742.p?id=1218246670763&skuId=1271742)?
Thanks in advance.
EDIT: While doing my research on the portfolio case and reading your comments, I have been thoroughly convinced to wait on the case soon to be released by zoogue in March of 2011. There is a youtube video on it. It looks pretty good. It is made of leather and allows you to view at nearly any angle due to the use of velcro.
IIxShockwavexII said:
I have seen the new accessories released from Motorola, but I think that the Portfolio Case just looks hideous. Has anyone seen a portfolio case similar to the official Apple iPad case (http://www.bestbuy.com/site/Apple%26%23174;+-+iPad%26%23153;+Case/1271742.p?id=1218246670763&skuId=1271742)?
Thanks in advance.
Click to expand...
Click to collapse
Your link doesn't work. I don't think the one for Xoom looks bad, just not crazy about the color.
IIxShockwavexII said:
I have seen the new accessories released from Motorola, but I think that the Portfolio Case just looks hideous. Has anyone seen a portfolio case similar to the official Apple iPad case (http://www.bestbuy.com/site/Apple®+-+iPad+Case/1271742.p?id=1218246670763&skuId=1271742)?
Thanks in advance.
Click to expand...
Click to collapse
The one that my friends have on their ipads don't tilt and have the viewing angles. That feature is a necessity to me
Sent from my Evo using Tapatalk
Ok, just purchased my Xoom and Moto Portfolio case. Have to say I'm disappointed with the case. Seems like Moto didnt fully think this one out. The build quality is very good and does what it says. Issues are:
1. You cannot charge the Xoom and have it in one of the viewing setups like monitor. In other words you cannot charge and work with a BT keyboard.
2. You cannot charge the device while the portfolio is closed. It has to be opened to access any of the ports
3. Folding the case back covers the on/off button.
4. Edges are hard plastic and seem like they'll leave wear marks on your Xoom after a while.
I got it too, and it's pretty lame. As mentioned above, you can't charge the device while it's propped up. That's the biggest WTF.
I see it as a very temporary solution. I want the tablet in some sort of protective gear, but as soon as something better comes along, I'm sending it to ebay.
you guys are being polite, the portfolio case blows.
the bottom corners have these nubs that jut out and are supposed to 'grip' the bottom, but they don't, and it generally just feels like they didn't actually have the full dimensions of the product before this was manufactured.
I even got out a xacto and cut these nubs off, hoping it would fit better, but it still pretty much sucks. Going to take it back, nubs gone or not. It's a shame because I want a fold back cover just in case I drop this, but this is NOT what I had in mind.
its kinda ok for me (for now) till hopefully otterbox comes out with a case for it. as atoy74 said, it sucks coz it has no opening or something for charging and syncing while closed.
The case really is a piece of crap. I'm constantly worried about the little nubs permanently scratching the Xoom's body and it doesn't close comfortably either. Getting the Xoom out of the case is a pain in the ass too because you're again worried about the body being scratched. It's also a lot heavier than I expected and adds a noticeable amount of weight. Also, not being able to charge while tilting is ridiculously stupid. I was looking forward to using this because of the nice tilting options, one of the few things Motorola got right with this case, but using it has me on the lookout for better alternatives.
i wish i read this before buying it. The case sucks squid ballzzzz
I really like the case. The charging issues you guys mentioned exist because this is a tablet, and is meant to be docked.
My issue is that when I close it.. I feel like I'm going to break a nail opening it. It should have a tab to open it up. Though the price is perhaps a little high for what it is.
never mind I love this case its perfect
This cases is indeed bad. They used way to much plastic. I'll be keeping my eye out for a nice third party case.
setite said:
The charging issues you guys mentioned exist because this is a tablet, and is meant to be docked.
Click to expand...
Click to collapse
What the hell are you talking about? I have owned an Ipad, Galaxy Tab and now the Xoom. I've never had this problem before and I've always used portfolio style cases. Access to the unit's ports should always be accessible and I shouldnt have to buy a $50 dock to do that.
Sent from my Xoom using XDA App
Protective Case Terrible design
Hello All , I have to agree on all point the case is not planed out right . What the HELL I can't charge and close the unit . The unit is awesome, but until someone finds a third party case protector what else can we do or does anyone have another idea or approach to protect their investment.
when you lay the xoom in the case flipped it directs the speaker sound towards you. Most flip cases make it hard to use the device with all of its accessories. The case gives excellent protection and makes watching movies awesome.
falconeight said:
when you lay the xoom in the case flipped it directs the speaker sound towards you. Most flip cases make it hard to use the device with all of its accessories. The case gives excellent protection and makes watching movies awesome.
Click to expand...
Click to collapse
I'm not saying the case doesn't have its strong points. But, the negatives are huge. This morning I already noticed wear marks on my Xoom where the plastic tabs rub. COME ON, it's only been 24 hours. There's no justification for a $40 device to reduce the value of a $800 one.
I can't wait for third party cases to start arriving. I've had wonderful experiences with Encase, Scosche, Seidio and Macally. Hopefully they'll have something soon-ish.
I think the case the OP was talking about is the OEM ipad case. I do like it and wish there was one like for the xoom.
setite said:
I really like the case. The charging issues you guys mentioned exist because this is a tablet, and is meant to be docked.
My issue is that when I close it.. I feel like I'm going to break a nail opening it. It should have a tab to open it up. Though the price is perhaps a little high for what it is.
Click to expand...
Click to collapse
Not really meant to be docked otherwise it would come with a dock, dock is optional and like on the ipad they should have create a way to charge it in the case, returning mine today
Sent from my Xoom using Tapatalk
atoy74 said:
I'm not saying the case doesn't have its strong points. But, the negatives are huge. This morning I already noticed wear marks on my Xoom where the plastic tabs rub. COME ON, it's only been 24 hours. There's no justification for a $40 device to reduce the value of a $800 one.
I can't wait for third party cases to start arriving. I've had wonderful experiences with Encase, Scosche, Seidio and Macally. Hopefully they'll have something soon-ish.
Click to expand...
Click to collapse
The Xoom Slides into the top part of the case. I used a file to rub down the plastice that pokes out on the bottom half.
TheNinthPlayer said:
This cases is indeed bad. They used way to much plastic. I'll be keeping my eye out for a nice third party case.
Click to expand...
Click to collapse
Just decided to hop in as I am working with some third party people to either 'get' or develop some accesories for the Xoom. I've been working with them for several months now on accessories for the gTab and it seems to have truned into a pretty solid relationship.
Im hoping to be able to get a few things for the Xoom owners. As SOON as I have get any word I'll keep you posted as well as list something in the 'marketplace' (have to be potically correct )
Just a heads up- looks like many of the other cases reviewed here but this one is only $10 shipped. I just ordered one; I'll review it when it arrives. 9 5-star reviews!
*Edit: looks like it's up to $15. Still, appears to be the same as the pyro case and a few others that sell for twice that.
http://www.amazon.com/gp/offer-list...-options=see-all-buying-options&condition=new
Wow, that looks almost exactly like the Pyro skin clip case that I just bought for $30 bucks. It's listed on amazon for $14.95+shipping now. How did you get it for $10 shipped? If the quality and build is anything like the pyro, I'd be intrigued
dhuangxda said:
Wow, that looks almost exactly like the Pyro skin clip case that I just bought for $30 bucks. It's listed on amazon for $14.95+shipping now. How did you get it for $10 shipped? If the quality and build is anything like the pyro, I'd be intrigued
Click to expand...
Click to collapse
looks like they upped it. It was $9.98 when I posted.
I think that the pyro case (and several others) are the same rebranded chinese thing. I really don't care, all I want is to pay less for it. At $15, it still beats most of the others by at least a few bucks. I'll review it when it gets here.
BTW- I'll update the OP with the price.
I bought this case from amazon for 9.98 shipped and received it in two days! They apparently had a promotion going because they refunded my money and let me keep the case for free in exchange for a review. Great case, great build quality and looks great!
This is the 3rd variation of the same case. I think it's all the same manufacturer just different distributors. I'm in!
Just got mine for 9.98 great quality and got it for free after I left them a review.
I don't know how everybody is giving this case such great reviews. Sure, it's cheap and does its job, but the quality is definetely not there. I got mine yesterday and the clips on the top seem somewhat uneven between each corner. Also, the case does not stay fully flat when holding the tablet opened in your hands. That's quite annoying and makes it basically unusable to me. The case also seems to bulge when closed due to the middle clamps holding the tablet; which, by the way, cover a bit of the bottom portion of each speaker.
For the price, I'd give this case 4 stars, but 5 stars is just too much. People are easily satisfied I suppose.
akarol said:
I don't know how everybody is giving this case such great reviews. Sure, it's cheap and does its job, but the quality is definetely not there. I got mine yesterday and the clips on the top seem somewhat uneven between each corner. Also, the case does not stay fully flat when holding the tablet opened in your hands. That's quite annoying and makes it basically unusable to me. The case also seems to bulge when closed due to the middle clamps holding the tablet; which, by the way, cover a bit of the bottom portion of each speaker.
For the price, I'd give this case 4 stars, but 5 stars is just too much. People are easily satisfied I suppose.
Click to expand...
Click to collapse
Look, I don't disagree that it's not perfect, but after owning many, many different cases for many different tablets, I have to say that this one is about as good as it gets for the price. The only cases I've seen that are better quality cost $50 or more. Maybe you got one that is defective; for the price that wouldn't surprise me. Get them to replace it. Also, please don't dismiss those of us that are happy with the case with "People are easily satisfied I suppose." That's rude.
BTW- I tried to figure out what you were talking about when you said "the case does not stay fully flat when holding the tablet opened in your hands" and realized the problem: you're not holding it tight enough. It's new material and needs to be conditioned. Squeeze it a bunch of times to loosen and crease the bottom edge.
I'll try to conditition it when I get home. Do you also notice a bulge when closing it from the middle clips?
does this case fit with an invisible shield by zagg?
jaewon223 said:
does this case fit with an invisible shield by zagg?
Click to expand...
Click to collapse
Yes. I have a clearprotector full body protector and it fits fine. So far no problem with it catching when I open and close the flap.
BTW- I think this is exactly the same case as the "pyro case" which has a huge thread here. Except much less expensive...
Please be honest guys, does your case stay flush when opening it 360 degrees without pushing it against its back? I find this highly annoying. I've been trying to break the leather all day and have had no success!
Also, anyone else here find that the locking flap marked their tablet over time? I'd hate for that to happen.
Thanks in advance...
shigga said:
Just got mine for 9.98 great quality and got it for free after I left them a review.
Click to expand...
Click to collapse
how u do that? i just order mine
akarol said:
I don't know how everybody is giving this case such great reviews. Sure, it's cheap and does its job, but the quality is definetely not there. I got mine yesterday and the clips on the top seem somewhat uneven between each corner. Also, the case does not stay fully flat when holding the tablet opened in your hands. That's quite annoying and makes it basically unusable to me. The case also seems to bulge when closed due to the middle clamps holding the tablet; which, by the way, cover a bit of the bottom portion of each speaker.
For the price, I'd give this case 4 stars, but 5 stars is just too much. People are easily satisfied I suppose.
Click to expand...
Click to collapse
I received my case with a note that said if I left a 5-star review I would be given a full refund, thus getting my case for free. I'm assuming that's why it's getting so many 5-star reviews.
akarol said:
Please be honest guys, does your case stay flush when opening it 360 degrees without pushing it against its back? I find this highly annoying. I've been trying to break the leather all day and have had no success!
Also, anyone else here find that the locking flap marked their tablet over time? I'd hate for that to happen.
Thanks in advance...
Click to expand...
Click to collapse
My case doesn't stay flush (if you mean folding it completely back like a magazine?) but neither did my belkin ultra thin folio. I believe its because of the design. The only way I can see it staying flush is if the material used was very pliable or there was a hinge (kind of like a notebook with rings).
Also, I too felt that it might scratch my tab with the front clip, but so far it hasnt. Overall, its a good case and in some aspects better than the belkin ultra thin folio.
Yeah, it's growing on me. I do wish it stayed more fluch when fully opened. I feel they could have made the flap holding both parts together a bit longer to allow that to happen.
I'm going barenaked with the tablet on this thing. I really hope it doesn't scratch the edges of my tablet. I have been puyshing the locking flap a bit outward so there's not much resistance to close it. Seems to help a bit.
vuabip00 said:
how u do that? i just order mine
Click to expand...
Click to collapse
I got a letter shipped with mine that basically said to do a review for the case and rate it and my payment would be refunded. Wrote the review and was refunded the next day.
gah so frustrating!! amazon doesnt ship to nz....sigh sigh.....
What on earth would make this case incompatible with the verizon version of the tab? Something in the case blocking the 4g signal?
Buji said:
What on earth would make this case incompatible with the verizon version of the tab? Something in the case blocking the 4g signal?
Click to expand...
Click to collapse
Uhhh... what about the different position of the buttons on the LTE models? Look up the user uploaded photos on the Amazon description of the Pyro Case.
Anyone has this/tried it?
Stand Smart Slim Leather Case Cover
Looks pretty decent to me and i'm thinking of getting it, was wondering if anyone had any experience with it.
i ordered one, this week, i will report as soon as i get it!
I just did as well, the silver version ;D
How will the smart cover part of that case stay on the tablet when covering the screen?
It does look good, waiting for your reviews of this case.
I got the black one about a week ago..it takes 2-3 weeks for china stuff to arrive
Sent from my GT-P7510 using xda premium
Lordwinkevin whats your review then? and what of the screen cover, does it "lock" in any way?
This is by far the best designed case you can get for the Tab10. All the other cases have ridiculously huge foot prints when in a stand mode.
The part of the case that covers the back looks cheap, seems there is a white colored plastic trim piece on it.
I would love to see some better quality pics of this case, the seller's pics are not revealing enough.
hmm i just ordered it couple of days ago... mine's shipping from HK... hopefully faster?
Ive had mine for over a week. This case is heavier than my tab! its essentially a cheap piece of plastic cover for the back and a microfiber suede material for the flap. Which is the heavy part ironically. It contains four pieces of some kind of heavy metal and a small magnet. Be carefull when closing it because I was scared that it might break my screen upon impact. And there isnt any way of it staying closed. It just flaps open if turned around. Ive already received a refund for mine. Now I just use the case as a weapon. The last thing a thief will think when I pull that thing out is that I will hurt him but honestly that **** hurts like hell, lol.
lfaria said:
Lordwinkevin whats your review then? and what of the screen cover, does it "lock" in any way?
Click to expand...
Click to collapse
I meant i ordered it about a weeks ago and should be here in the next few days. I watched this video review though before buying it
http://www.youtube.com/watch?v=p1HZsCxImFs&sns=em
lordwinkevin said:
I meant i ordered it about a weeks ago and should be here in the next few days. I watched this video review though before buying it
http://www.youtube.com/watch?v=p1HZsCxImFs&sns=em
Click to expand...
Click to collapse
Just watched it, thanks for the link. Seem alright. Ill make a small review once i get mine.
So, any updates on this?
im waiting on mine as well...should come in any day now
Mine came in the mail today. I was going to do a youtube unbox but I have a crappy HP computer with windows 7 (no voice over in movie maker).
Anyway, I really like it like the case. It snaps on and off easily, has good cut outs and the plastic back adds a little stiffness to the tab. Love how light and thin the GTab is but it felt just a little too flexible. It also works well in portrait mode (how I use my tab most of the time) because it's foldable. It's more of a protector so I'm also using a Built 10 netbook sleeve that I picked up at staples for $10.
Cool, thx for the pics !
im still waiting on mine
Edit: Turns out it was waiting for me in the mail looks good, only thing is i asked for the silver one and i got the white, not really sure if i should complain or not, its not like im going to the "store" to return it hehe. Other then that, its cool and doesnt feel cheap at all
Just got mine today after seeing it discussed in this thread - glad I did, absolutely love it! Highly, high recommend this to anyone looking for a lightweight but durable case.
this cover looks beautiful with the tablet I think.
Hi guys,
Is the cover for the front able to stay closed, or is it not magnetic at all?
Im looking for a slim line cover/case and this looks nice, plus its an obvious apple cover rip off, which aint that bad.
leaskovski said:
Hi guys,
Is the cover for the front able to stay closed, or is it not magnetic at all?
Im looking for a slim line cover/case and this looks nice, plus its an obvious apple cover rip off, which aint that bad.
Click to expand...
Click to collapse
It doesnt stay locked. It has magnets but it just barely reaches the top besel so it doesnt connect to it.
I've been using it for 3 weeks now, and i love it!
I've made a review video of the awesome accessory the FlyGrip... DEFINITELY check it out! I love it.
http://www.youtube.com/watch?v=EKNUkB9N1Yg
Use code QBKING77 for free shipping!
I might pick up one of these, I noticed on the site that they have a "complimentary case" for our phone with purchase. I mean im sure its just a throw in case but you can't be mad at that, especially with free shipping, thanks qb!
Sent from my SPH-D710 using XDA App
bcparker said:
I might pick up one of these, I noticed on the site that they have a "complimentary case" for our phone with purchase. I mean im sure its just a throw in case but you can't be mad at that, especially with free shipping, thanks qb!
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
I might consider it ON a case, but I wouldn't want to stick anything on the phone itself. For one thing, it wouldn't fit in my car or desk dock.
Does it come with extra adhesive pads? If not, then what do you do if/when you get a new phone?
Attached this to the outside of a case, and it is GREAT.
I am a cyclist, and I have ruined phones by dropping them off the bike. I can now ride and use a phone if needed. (Yeah they say texting and driving is bad xD)
You should be a pitch man, watching this was like watching one of those 15 minute infomercials.
qbking77 said:
I've made a review video of the awesome accessory the FlyGrip... DEFINITELY check it out! I love it.
http://www.youtube.com/watch?v=EKNUkB9N1Yg
Click to expand...
Click to collapse
Ordered one today. Gonna try to get the owner some free TV advertising once I try it for myself and decide its worth it.
JimSmith94 said:
I might consider it ON a case, but I wouldn't want to stick anything on the phone itself. For one thing, it wouldn't fit in my car or desk dock.
Does it come with extra adhesive pads? If not, then what do you do if/when you get a new phone?
Click to expand...
Click to collapse
It comes with one extra sticky pad.
I'm considering getting this but all of my phones have extended batteries with the extended back piece :/. I'll just get one for my brothers iPhone I guess lol.
Wow that really does look pretty handy. I am wondering if I cam modify my rugged case to fit this without adding any thickness. it just might be thick enough (My case) I would have to cut out the cases kickstand but this acts as a kickstand so I lose nothing.
but man $30 is steep for that.
It comes with one extra sticky pad. Flygrip. The one handed solution. This sounds like a smartphone pr0n fapping device. One hand to hold the phone, the other to grip your fly.
oscarthegrouch said:
It comes with one extra sticky pad. Flygrip. The one handed solution. This sounds like a smartphone pr0n fapping device. One hand to hold the phone, the other to grip your fly.
Click to expand...
Click to collapse
It does but I think the kickstand would be more handy haha.
nerys71 said:
Wow that really does look pretty handy. I am wondering if I cam modify my rugged case to fit this without adding any thickness. it just might be thick enough (My case) I would have to cut out the cases kickstand but this acts as a kickstand so I lose nothing.
but man $30 is steep for that.
Click to expand...
Click to collapse
I was thinking the same for such a simple device, but it looks well made. I'm betting it could be redesigned to be even thinner than 1/4" thickness which isn't all that thin.
Agreed 1/4" is almost as thick as the phone itself.
Machine this bad boy out of aluminum or even Titanium and make it 2-3mm thick at most and I would eve pay $40 for that one.
Problem is if that outer piece gets too thin it could bend/sheer/snap. It looks like it has a thick glossy paint coating to top it off which looks nice and may add to the durability. Using those metals may even add to the price and you'd be paying $40 or more.
I'm finding more and more often with the epic 4g touch less and less hands on experience when it comes to accessories. Best Buy has only one case I'd even consider buying (platinum series case) and Radio Shack only has full enclosure cases that go on your belt. Not really digging that solution. I may just invest in a Flygrip, how long is the free shipping good for?
I know and $40 to $45 would be fine if it was say titanium (it would be strong enough that thin) and at minimum half its current thickness. ie around 2mm would be nice. maybe 3mm.
as it stands its a lot of money for an awful thick piece of plastic. (relative to the size of the phone)
Good idea, too big for me though.
Sent from my Samsung Epic 4G Touch.
Thanks for the review. Looks awesome, but wouldn't be able to put the phone on a car dock or desktop dock after you put the Fly grip on I'm assuming...
Just purchased on of these. Cant wait to get it.
I am kinda worried about the car dock thing though since I've been seriously considering getting one. I thought that magnetic dock in the other thread was pretty cool, but after having this IDK if it would work.
it would not be all that hard to modify the car dock to work with the Fly Grip if you positioned it properly.
If you do the tilt insert method ie you don't slide the jack slider up and down this might work.
get another dock of any kind (one of the cheap ones on ebay for $6) just so long as it has the depressed section with the 4 holes for the universal quad mount.
you glue it onto the back of the vehicle dock. making it THICKER.
now you have enough depth to "cut" a hole into the vehicle dock large enough to encompass the flygrip.
and there you go. vehicle dock and flygrip. it is 1 2 3 ? no but its doable.
BTW discovered the kickstand built into my case works almost exactly and just as effectively a flygrip.
I was contemplating how to cut a hole in my case to accommodate a flygrip adn it hit me ahh just use the kickstand already on it -)
I will make a video tommorrow.
30 dollars is WAY too much for this thing...10-15 dollars at the most, but no way for 30 dollars..
I got one on the way thanks for the heads up qbking77! I think this is perfect for people with 4 inch+ phones.
Sent from my SPH-D710 using xda premium
Does it rotate so that you can use the phone in landscape?