Develop Bugs

[Q] insertcoin data plus V3 help

i have installed insertcoin dataplus v3 with partition of fat32 =6.40gb
and ext3=1gb ...still the internal memory appears low all the time ...can any1 help me with this .....
Thanx

Are you S-off? Did you flashed the CM7 HBoot partition table?

YES M S-OFF ..... I DIDNT FLASH CM7 HBoot partition table ...WHAT IS IT ???

Next time READ!!!
from the Insertcoin data++ thread:
1st things 1st, you need to flash Bravo CM7 Hboot. either from fastboot or from hboot.- goto alpharev.nl site - is there together with all the info how to flash it
Click to expand...
Click to collapse
From alpharev.nl (here you can find also the required files).
If you are already S-OFF, you can get our newest patched HBOOTs from here. (without going through the entire procedure again).
Please read the entire table and pick the partition table with the correct sizes for your ROM. One easy way to switch partition tables, is to nandroid backup,
and verify that the sizes of your backup are indeed the ones listed in the table (or smaller), and restore after flashing hboot.
1) Nandroid backup in recovery.
1a) Download This file.
2) Verify the MD5SUM of the file you downloaded against the one in the table.
3) Flash HBOOT with your phone in fastboot mode (Back+POWER) -> 'fastboot flash hboot bravo_alphaspl.img' (change into the correct filename for the HBOOT you downloaded)
4) 'fastboot reboot-bootloader'
5) 'fastboot erase cache'
6) Boot recovery, wipe everything and restore.
Click to expand...
Click to collapse

More detailed instructions here:
http://forum.xda-developers.com/showpost.php?p=12699557&postcount=8

thanx davebugyi

gawwd .....i still cant get it still didnt understand the procedure wanted to use data++

1.Download the .img file from Alpharev's site. The BRAVO_CM7 one.
2. Download android SDK from official site, and run SDK Manager. When it is running, then install the platform-tools (revision 3 ATM), too.
3. Copy the CM7 file (.img) you downloaded into the android SDK folder, where fastboot.exe is located.
4. Reboot your phone into fastboot (holding down BACK+POWER keys when the phone is switched off) - it should show FASTBOOT USB.
4a. Make sure you have the USB drivers installed (for me HTC sync is not needed, i used the UNREVOKED USB drivers instead)
5. Fastboot flash. navigate to your android SDK directory in Command Promt (CMD.EXE) then run these commands:
a, fastboot flash hboot bravo_alphaspl.img (or whatever is the name of the file)
b, fastboot reboot-bootloader
c, fastboot erase cache
6. You have now the Partition table.
7. Just in case, go to the recovery, wipe EVERYTHING and Re-flash the ROM.

Alternative solution here: Did not try it myself, so don't ask, how to
http://forum.xda-developers.com/showthread.php?t=794638

finally did it .....
thanx alot davebugyi

[Q] Bricked phone?

Hi all,
Here's the situation;
Tried to update to the latest official rom after buying a HTC Desire from a friend. When upgrading this error appeared: ERROR [110]
After this, the phone rebooted and is stuck on the HTC logo with 4 exclamation marks in each corner.
I can't boot into recovery, nor hboot, only fastboot seems to work. Below you can find the fastboot output.
-----------------------------------.
STARTING PRINT OF DEVICE INFO.
-----------------------------------.
SPL/hboot version: 6.93.1002.
Radio version: 5.17.05.23.
Main software version: 3.14.405.1.
cid: htc__e11.
cpld: none.
product: bravo.
mid: pb9920000.
security: off.
build-mode: ship.
-----------------------------------.
Print of device info SUCCESSFUL.
Tried making a goldcard with another phone, and reflash, but the same error appears with the same result.
There is not that much info about this problem, already tried everything i've found...

Hi did you flash aplharev downgrade hboot? as you saying fastboot working try to flash it and run ruu again. Is 'fastboot oem boot' working?

already downgraded hboot
and 'fastboot oem boot' returns 'FAILED (status read failed (Too many links))'

just find out it fails on flashing the radio.
Maybe he blocks on trying to downgrade the radio? I'm not able to downgrade radio true fastboot commander neither.

Hi try to flash alpharev stock and do it again... it has bigger cache partition... see :http://forum.xda-developers.com/showthread.php?t=1171494
ps did you restart phone after flashing downgrade?

I just did following steps:
1. flashed 'bravo_alphaspl.img' as Hboot/SPL
2. rebooted
3. trying to downgrade radio again, same sh*t, tried the RUU installer again, also same sh*t

just did some searches... you can try it but no sure, as you are able to flash radio any time unless any other problem
flash downgrade
fastboot erase cache
fastboot oem rebootRUU
run ruu

i'm NOT able to downgrade the radio version...
guess this is the cause of all my problems...
any other suggestions?

RUU flashes the radio also, no need to change radio

Where did you get that update from?

it's isn't the upgrade that failed it was the Hboot image, i had the same error trying RUU the phone with cm2r2 image on hboot, when changed to stock hboot it stoped giving error 110, i had the same screen with exclamation marks, i've managed to get RUU flashed on the phone, i dont remember exact the procedure but fastboot commands worked and i was able to flash the phone with RUU, i used many RUU's until find one that worked with my phone

Did you try htcdev download? that should work

If you were actually paying attention to what are others telling you, you would have your Desire fixed long time ago.

I solved the same problem by doing a backup of a good desire and then flashed via fastboot the boot.img, cache.img, recovery.img and system.img.
I did all of this after I had rolled back the hboot from the Alpherev CM7 version to the stock alpharev hboot so same as on the other phone (this can be done via fastboot of reflashing program.
I then typed 'fastboot boot OEM' in fastboot and hey presto booted up into gingervillan.
Oh and used a gold card when doing it.
Sent from my HTC Runnymede using xda premium

I think I tried like 12-13 RUU updates, finally founded the one I needed!
-RUU_HTC+Desire+Android+2.3+Upgrade+(Gingerbread)-3.14.405.1-
Thanks for all the reply's, none of the solutions above worked for me, except flashing the one and only (latest) RUU for my phone.
I'm going to keep my phone with original rom now, unrooted, because it seems that rooting is impossible with current ROM...

A plea for help--SLCD brick

I was trying to flash Alpharev's data++ hboot to my CDMA (SLCD) Desire using Mumilover's Fastboot Commander tool.
After it said it successfully flashed hboot, I shut down from the fastboot menu. After that, my Desire won't turn on. It gives haptic feedback buzzes when you'd expect, but the screen doesn't turn on.
I can get it into fastboot (battery pull, replace battery, hold back and home for ten seconds). When I run Fastboot Commander (phone in fastboot), it says:
Feedback, criticism, ideas, improvments, thanks and appreciations are welcomed on the forum-thread.
............................................................
Operating system: Windows.
Tools folder found.
Windows fastboot tools found.
The folder containing the IMG files was not found.
No Nandroid folder was not found - "Restore" button disabled.
STARTING PRINT OF DEVICE INFO.
-----------------------------------.
SPL/hboot version: 6.93.1002.
Radio version: 2.15.00.11.16.
Main software version: 2.11.573.5.
cid: utsi_001.
cpld: none.
product: bravoc.
mid: pb9940000.
security: off.
build-mode: ship.
-----------------------------------.
Print of device info SUCCESSFUL.
I cannot get ADB to connect to it (even when I put the phone in fastboot).
I tried reflashing the stock hboot (on Alpharev's site), clearing data/cache, etc via Fastboot Commander, but no matter what I do, the screen will not turn on.
Is there any hope? I was looking into making a goldcard (as per Bortak's troubleshooting guide), but the links to the goldcard tool is dead (and I don't think I can make one without ADB finding my phone).
I think I found the RUU that should work:
http://goo-inside.me/bravoc/ruu
I've tried both the .exe RUU and to flash the PB99IMG.zip with Fastboot Commander's little full zip utility, but each one fails (I think because they can't overwrite the alpharev hboot? I get this error in Fastboot Commander:
FAILED (remote: 51 partition update fail)"
I try not to be a noob and read before I ask, but I'm in over my head.
Help would be humbly appreciated.
As a total hailmary: is JTAG an option I should look into, or should I just sell it for parts/cry for a little bit?

Well you flashed something that is for the Bravo on the BravoC.. why would you even try? lol
Your only hope really is to flash the CORRECT BravoC RUU...

I didn't understand that CDMA Desires couldn't use custom hboots. Since I used Revolutionary to S-OFF my device, I figured I could also change up the boot partitions.
I believe this:
http://goo-inside.me/bravoc/ruu/RUU...Radio_2.15.00.11.16_release_168495_signed.exe
...is the correct RUU for my device, but it fails at...
WOW, I literally ran the RUU one last time (which would be the 5th time) to find out exactly where it hung up so I could give you guys more info...and this time it suddenly decided to work!
Guess I know not to touch hboots from now on.
And I'll keep several copies of that RUU on various harddrives...

[Q] Help Me and my desire hd

Hello everyone,
six months I have the ROM Miui but then the phone is switched off
my htc desire hd will not start
when I start the ext4 recovery touch: the error recovery in safe mode
and I can not install a new ROM or do a wipe
Here is what hboot says:
*******AAHK**********
ACE PVT ENG S-OFF RL
HBOOT-0.85.2425
MICROP-0438
RADIO-26.10.04.03_M
eMMC-boot
Apr 12 2011,00:55:45
I also see "HBOOT USB PLUG" when plugged in, and the computer does beep though no connection can be established. HTC Sync doesnt work (on a different computer), adb cannot connect and AAHK doesnt find a device.
The RUU from HTCDEV doesnt find the phone either....
What can I do? I tried to flash many PD98IMG.zip for example that of the stock and PD98IMG_cwmrecovery nothing but the result is always:
sd checking ....
loading .... [PD98DIAG.zip]
No Image
Loading .... [PD98DIAG.nbh]
No Image or Wrong Image
Loading .... [PD98img.zip]
No Image
Loading ...... [PD98img.nbh]
No Image or wrong image.
aspect of your answers and sorry for my english stupid

first method.. you can try flashing recovery from FASTBOOT mode..
download 4EXT recovery.img from here then extracted file and placed it to your adb/ sdk folder on your pc...then flash it through FASTBOOT mode with command "fastboot flash recovery recovery.img"
second method...you can firstly flash RUU that already rooted by phiber2000 download from here.. through bootloader with PD98IMG.zip name of file..to fix your bootloader and at once replaced your hboot to the newest of ENG hboot..after that...you can continued with the first step for flashing recovery.img through FASTBOOT
hope this help..

thanks friend!
I flashed the recovery via fastboot commander but into recovery the ext4 partition is sometimes mounted and sometimes error mounting
the phone works via fastboot commander 1:51 :
Feedback, criticism, ideas, improvments, thanks and appreciations are welcomed on the forum-thread.
............................................................
Operating system: Windows.
Tools folder found.
Windows fastboot tools found.
The folder containing the IMG files was not found.
No Nandroid folder was not found - "Restore" button disabled.
STARTING PRINT OF DEVICE INFO.
-----------------------------------.
SPL/hboot version: 0.85.2425.
Radio version: 26.10.04.03_m.
Main software version: 2.47.502.7.
cid: 11111111.
cpld: none.
product: ace.
mid: pd9810000.
security: off.
build-mode: ship.
-----------------------------------.
Print of device info SUCCESSFUL.
I tried to erase the system cache and data but it makes me always the same problem later
What do you advise me to do?

Zueg92 said:
thanks friend!
I flashed the recovery via fastboot commander but into recovery the ext4 partition is sometimes mounted and sometimes error mounting
the phone works via fastboot commander 1:51 :
Feedback, criticism, ideas, improvments, thanks and appreciations are welcomed on the forum-thread.
............................................................
Operating system: Windows.
Tools folder found.
Windows fastboot tools found.
The folder containing the IMG files was not found.
No Nandroid folder was not found - "Restore" button disabled.
STARTING PRINT OF DEVICE INFO.
-----------------------------------.
SPL/hboot version: 0.85.2425.
Radio version: 26.10.04.03_m.
Main software version: 2.47.502.7.
cid: 11111111.
cpld: none.
product: ace.
mid: pd9810000.
security: off.
build-mode: ship.
-----------------------------------.
Print of device info SUCCESSFUL.
I tried to erase the system cache and data but it makes me always the same problem later
What do you advise me to do?
Click to expand...
Click to collapse
did you already tried flashing RUU PD98IMG.zip (rooted RUU by phiber2000) that i give it the link to you before..?
just make sure to placed that RUU PD98IMG under the root of your sd card..then flashing it through loading from your phone bootloader..

JJeamy said:
did you already tried flashing RUU PD98IMG.zip (rooted RUU by phiber2000) that i give it the link to you before..?
just make sure to placed that RUU PD98IMG under the root of your sd card..then flashing it through loading from your phone bootloader..
Click to expand...
Click to collapse
thanks friend,
Yesterday I solved and the phone started
but I was wrong to flshare the recovery and did the erase of the system and the phone is dead
when I connect the power supply does not turn on no led
it is fried the motherboard?

Zueg92 said:
thanks friend,
Yesterday I solved and the phone started
but I was wrong to flshare the recovery and did the erase of the system and the phone is dead
when I connect the power supply does not turn on no led
it is fried the motherboard?
Click to expand...
Click to collapse
when I connect it to my pc makes the sound of the new device but not red led power

Zueg92 said:
when I connect it to my pc makes the sound of the new device but not red led power
Click to expand...
Click to collapse
did the phone still can get into bootloader..?

JJeamy said:
did the phone still can get into bootloader..?
Click to expand...
Click to collapse
no i can't....i have deleted bootloader!! :crying:

Zueg92 said:
no i can't....i have deleted bootloader!! :crying:
Click to expand...
Click to collapse
WHAT !!!!...
are you sure that your bootloader is already gone...?
i mean...did you already trid to pressing and hold volume down+power to turn on your phone..then nothing happen..?
if so...then you must take your phone to the services center to flashing emmc from the beginning..
sorry for can't help you more than this..

JJeamy said:
WHAT !!!!...
are you sure that your bootloader is already gone...?
i mean...did you already trid to pressing and hold volume down+power to turn on your phone..then nothing happen..?
if so...then you must take your phone to the services center to flashing emmc from the beginning..
sorry for can't help you more than this..
Click to expand...
Click to collapse
thank you so much you have been very kind ....
Now I try to flash the bootloader via EPROM

[Q] Can not flah Stock ROM

Hi,
I can not successfully run RUU ROM. I though, that ruu can fix almost everything, but everytime I got error message 140. Before 3 month I download stock rom and successfully used it, but now the same rom doesnt work (from this site: http://shipped-roms.com/index.php?category=android&model=Ace ).
Bootloader is relocked.
Main problem is that after "standart" restart phone stuck on white screen with htc logo. If I restart to bootloader, via fastboot push boot.img to phone, than phone works almost wel.. ...until next restart.. :/
I know only one way how to fix - via stock rom. Or does exist any next solution?
I try to use this stock rom:
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed.exe
(before 3 month works perfect, now I got error 140...)
Here is my phone info:
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.0.0
INFOserialno: SH18KRX02893
INFOimei: xxxxxxxxxxxxxx
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: HTC__102
INFObattery-status: good
INFObattery-voltage: 4204mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.004s
Thanks all for tips

You mean fastboot falsh boot boot.img (don't do that on S-on device)
try:
Step 1)
after runing ruu.exe in windows temp folder you can find room.zip
copy it to another location (in folder where you have fastboot and adb)
close ruu.exe
Step2)
If you are in android
adb reboot oem-78
or If you are in hboot (fastboot)
fastboot oem rebootRUU
when your phone restart and get in ruu flash mode
fastboot flash zip room.zip

Gussta said:
You mean fastboot falsh boot boot.img (don't do that on S-on device)
try:
Step 1)
after runing ruu.exe in windows temp folder you can find room.zip
copy it to another location (in folder where you have fastboot and adb)
close ruu.exe
Step2)
If you are in android
adb reboot oem-78
or If you are in hboot (fastboot)
fastboot oem rebootRUU
when your phone restart and get in ruu flash mode
fastboot flash zip room.zip
Click to expand...
Click to collapse
If I am understand well:
1) conect phone to pc, run instalation ruu
2) during instalation process find in win/temp folder rom.zip
3) copy this file tinto folder with adb files
4) cancel instalation
5) in phone run bootloader than fastboot
6) run command prompt in folder with adb and rom files, than run "fastboot oem rebootRUU"
7) wait a few minute until instalation end
8) run phone, than go to fastboot and from command prompt run "fastboot flash zip room.zip"
9) and now phone should be repaired
Is that right?
btw: if I want to turn on my phone, every time I have to flash boot.img via fastboot otherwise phone didnt start..

Pilsner12 said:
If I am understand well:
1) conect phone to pc, run instalation ruu
2) during instalation process find in win/temp folder rom.zip
3) copy this file tinto folder with adb files
4) cancel instalation
5) in phone run bootloader than fastboot
6) run command prompt in folder with adb and rom files, than run "fastboot oem rebootRUU"
7) wait a few minute until instalation end
8) run phone, than go to fastboot and from command prompt run "fastboot flash zip room.zip"
9) and now phone should be repaired
Is that right?
btw: if I want to turn on my phone, every time I have to flash boot.img via fastboot otherwise phone didnt start..
Click to expand...
Click to collapse
Almost
6) run command prompt in folder with adb, fastboot and rom files, than run "fastboot oem rebootRUU"
7) wait a few minute until phone goes in ruu install mode
8) than from command prompt run "fastboot flash zip room.zip"
9) and now phone should be repaired

Gussta said:
Almost
6) run command prompt in folder with adb, fastboot and rom files, than run "fastboot oem rebootRUU"
7) wait a few minute until phone goes in ruu install mode
8) than from command prompt run "fastboot flash zip room.zip"
9) and now phone should be repaired
Click to expand...
Click to collapse
I found rom.zip, ran "fastboot flash zip rom.zip" and now I am waiting more than 10 minutes (mabye more) and on phone is blask screen with white logo HTC and on command prompt isnt nothing new..
How long it takes, or what I should do?

Pilsner12 said:
I found rom.zip, ran "fastboot flash zip rom.zip" and now I am waiting more than 10 minutes (mabye more) and on phone is blask screen with white logo HTC and on command prompt isnt nothing new..
How long it takes, or what I should do?
Click to expand...
Click to collapse
I found other manual http://androidforums.com/desire-hd-all-things-root/716369-unroot-desire-hd-file-ruu-2.html but my phone stop working in same moment:
INFOzip header checking...
INFOzip info parsing...
after parsing nothing happens.. (more than hour)

Pilsner12 said:
I found rom.zip, ran "fastboot flash zip rom.zip" and now I am waiting more than 10 minutes (mabye more) and on phone is blask screen with white logo HTC and on command prompt isnt nothing new..
How long it takes, or what I should do?
Click to expand...
Click to collapse
Info pharsing musn't take to long. Maybe max min. or two.
Do you get any green stripe under HTC logo in black screen?
I didn't see that anytime.
In this step I think you can stop it with unplaging cable close cmd plug cable again and type fastboot reboot or try just close cmd open it again and type the same.
But never ever pull out battery. Rather unplug cable and wait that phone loose battery power. With pulling out battery you can burn eMMC disk.
After you reboot phone, you can try again.
---------- Post added at 09:26 PM ---------- Previous post was at 09:21 PM ----------
Pilsner12 said:
I found other manual http://androidforums.com/desire-hd-all-things-root/716369-unroot-desire-hd-file-ruu-2.html but my phone stop working in same moment:
INFOzip header checking...
INFOzip info parsing...
after parsing nothing happens.. (more than hour)
Click to expand...
Click to collapse
I didn't understand now.
You try several time with the same error or?

Gussta said:
Info pharsing musn't take to long. Maybe max min. or two.
Do you get any green stripe under HTC logo in black screen?
I didn't see that anytime.
In this step I think you can stop it with unplaging cable close cmd plug cable again and type fastboot reboot or try just close cmd open it again and type the same.
But never ever pull out battery. Rather unplug cable and wait that phone loose battery power. With pulling out battery you can burn eMMC disk.
After you reboot phone, you can try again.
---------- Post added at 09:26 PM ---------- Previous post was at 09:21 PM ----------
I didn't understand now.
You try several time with the same error or?
Click to expand...
Click to collapse
I didnt get any green stripe under HTC logo.
Yes, I try several times with same result - nothing happens..
I try for shure again stock rom and still not working. Error 155.
What actually mean "INFOzip info parsing"?
btw: how I can recognize, that eMMC disk is ok or corrupt?

Error 155 gets when either your bootloader is unlocked or u r using the wrong RUU
Factory reset your phone to remove any non-stock stuff from the ROM and try again.
If file fail with error don't get out from ruu, just start flasihng again.
Sometimes you have to flash twice in a row to get it.
After it's done type fastboot reboot-bootloader (takes you back to fastboot)
Do Factory reset again.
If you failed with flashing try with difrent rom.
INFOzip info parsing means that he is checking if room.zip is ok.
"btw: how I can recognize, that eMMC disk is ok or corrupt?"
If you change settings, contacts, alarm etc.. and when you shut down your phone, pull out your battery, wait one to two minutes, put it back in, power on phone and if you get everything back like it was before you maide changes it's probably bad eMMC. If everything get remembered you don't have problem with eMMC.
But error you get dosn't have anything with eMMC. With bad eMMC you can correctly flash ROM and after restarting your phone you can see that you haven't flash anything.
The reason is that phone first push everything to RAM and than on eMMC (because eMMC is slow).
When you push some data to phone and it get RAM you have it but because (and if not) eMMc can't save it, after restart you have nothing.

Gussta said:
Error 155 gets when either your bootloader is unlocked or u r using the wrong RUU
Factory reset your phone to remove any non-stock stuff from the ROM and try again.
If file fail with error don't get out from ruu, just start flasihng again.
Sometimes you have to flash twice in a row to get it.
After it's done type fastboot reboot-bootloader (takes you back to fastboot)
Do Factory reset again.
If you failed with flashing try with difrent rom.
INFOzip info parsing means that he is checking if room.zip is ok.
"btw: how I can recognize, that eMMC disk is ok or corrupt?"
If you change settings, contacts, alarm etc.. and when you shut down your phone, pull out your battery, wait one to two minutes, put it back in, power on phone and if you get everything back like it was before you maide changes it's probably bad eMMC. If everything get remembered you don't have problem with eMMC.
But error you get dosn't have anything with eMMC. With bad eMMC you can correctly flash ROM and after restarting your phone you can see that you haven't flash anything.
The reason is that phone first push everything to RAM and than on eMMC (because eMMC is slow).
When you push some data to phone and it get RAM you have it but because (and if not) eMMc can't save it, after restart you have nothing.
Click to expand...
Click to collapse
If I am understant well:
1) relock bootloader "fastboot oem lock"
2) Start phone into bootloader
3) from bootloader run factory reset
4) type fastboot reboot-bootloader run factory reset again
In case, that I have in my phone corrupted stock rom and phone trying use it, how I can use another rom?
via command prompt "fastboot flash zip rom.zip"?
(prepared from stock installation process)

Pilsner12 said:
If I am understant well:
1) relock bootloader "fastboot oem lock"
2) Start phone into bootloader
3) from bootloader run factory reset
4) type fastboot reboot-bootloader run factory reset again
In case, that I have in my phone corrupted stock rom and phone trying use it, how I can use another rom?
via command prompt "fastboot flash zip rom.zip"?
(prepared from stock installation process)
Click to expand...
Click to collapse
1) relock bootloader "fastboot oem lock"
2) Start phone into bootloader
3) from bootloader run factory reset
4) type fastboot rebootRUU
5) type fastboot flash zip rom.zip (if you get error repeat this step one more time)
6) type fastboot reboot-bootloader
7) run factory reset
---------- Post added at 03:47 PM ---------- Previous post was at 03:42 PM ----------
Pilsner12 said:
In case, that I have in my phone corrupted stock rom and phone trying use it, how I can use another rom?
via command prompt "fastboot flash zip rom.zip"?
(prepared from stock installation process)
Click to expand...
Click to collapse
I didn't understand what did you want to say with this part?
If you wanted to say: what to do if you flash stock rom?
Just flash another one with fastboot flash zip rom.zip

Gussta said:
1) relock bootloader "fastboot oem lock"
2) Start phone into bootloader
3) from bootloader run factory reset
4) type fastboot rebootRUU
5) type fastboot flash zip rom.zip (if you get error repeat this step one more time)
6) type fastboot reboot-bootloader
7) run factory reset
---------- Post added at 03:47 PM ---------- Previous post was at 03:42 PM ----------
I didn't understand what did you want to say with this part?
If you wanted to say: what to do if you flash stock rom?
Just flash another one with fastboot flash zip rom.zip
Click to expand...
Click to collapse
Yes, it is what I am wanted to say.. sorry for my english.
I try it exactly how is here described but it doesnt help.. (tryed other rom.zip)
I foud this manual: http://forum.xda-developers.com/showthread.php?t=2367322 but if I want to run aahk, command prompt reply:
Code:
File: "tools\bin\fre3vo" is missing or corrupt.
Download and extract again
Some virus scanners remove the necessary exploits for temproot.
Disable virus scan if that happens.
Pokračujte stisknutím libovolné klávesy...
I think only one way how this fix it is to gain S-OFF. Or does exist any other way?
..but I dont know how..

Pilsner12 said:
Yes, it is what I am wanted to say.. sorry for my english.
I try it exactly how is here described but it doesnt help.. (tryed other rom.zip)
I foud this manual: http://forum.xda-developers.com/showthread.php?t=2367322 but if I want to run aahk, command prompt reply:
Code:
File: "tools\bin\fre3vo" is missing or corrupt.
Download and extract again
Some virus scanners remove the necessary exploits for temproot.
Disable virus scan if that happens.
Pokračujte stisknutím libovolné klávesy...
I think only one way how this fix it is to gain S-OFF. Or does exist any other way?
..but I dont know how..
Click to expand...
Click to collapse
You can try with AAHK.
Here's the link for fre3vo: http://www.4shared.com/zip/nBCVzHMl/Fre3vo
If AAHK tell you that some files in tools\bin\ driectory missing, just find tham on google and download them.
Always turn off your virus scanners and HTC sync when you use aahk.