So I have noticed lately since eco5 after I root and install a rom don't matter if I'm CWM3 or2.5 it gets really hot when I'm using data and while its on the charger.. and if its off the charger it still gets warmer than usual maybe its just me but any ideas? When I'm not rooted and am just stock eco5 it don't get hot at all :\ I'm lost here and could this cause damage?
(Sorry for the bad puncuation and grammer)
Sent from my SPH-D700 using XDA Premium App
I should say also my set cpu its at on demad. 1ghz being my highest setting. 100mhz lowest I'm on syndicate 1.1.0 with vision kernel.
Sent from my SPH-D700 using XDA Premium App
Olds_96 said:
I should say also my set cpu its at on demad. 1ghz being my highest setting. 100mhz lowest I'm on syndicate 1.1.0 with vision kernel.
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
That's your problem, not all phones can handle scaling from 100mhz minimum, switch it to 200mhz and try it for a few hours.
Ok ill try that. Let you know ina few hours how it works ok thank you
Sent from my SPH-D700 using XDA Premium App
It worked thank you
Sent from my SPH-D700 using XDA Premium App
Related
Every time I try to overclock my phone using the built in CPU settings on cm7 it reboots. It wont go past 1113 when I try 1190 it reboots I'm using tiamat kernel.
Sent from my PC36100 using XDA Premium App
godefoy said:
Every time I try to overclock my phone using the built in CPU settings on cm7 it reboots. It wont go past 1113 when I try 1190 it reboots I'm using tiamat kernel.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
That simply means that your phone doesn't like to be clocked that high. Evo's can get very unstable when trying to clock too high, and reboots is the most common symptom. Slow the clock speed down a bit and see what happens. Also, maybe try a different kernel. The Tiamat kernel may not agree with your phone. My Evo reboots randomly on any Tiamat kernel I've ever used, including the latest one. My Evo just doesn't like that kernel, on any governor, or any clock speed I've tried. Just make sure you don't have the 'set on boot' checked until you find where your phone is stable.
It does the same using savaged Zen kernel
Sent from my PC36100 using XDA Premium App
godefoy said:
It does the same using savaged Zen kernel
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
I'd try lowering the clock speed a bit until it's stable. What governor setting are you using? Have you tried on any different governor settings?
Using performance
Sent from my PC36100 using XDA Premium App
godefoy said:
Using performance
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Performance probably isn't the best idea when you're overclocking at speeds that are known to be unstable. Try using smartass or SavagedZen if you're on SZ. For Tiamat, use interactive or ondemand.
Do you really need to overclock, or are you just doing it because you can? My phone runs smoothly undervolted. I dropped SetCPU and just use Tiamat + Viperboy's scripts. I've heard that higher speeds cause instability - freezes, crashes, reboots - but have never experienced it myself.
(from... Evo/MIUI/Tapatalk)
Very interesting plainjane
Thanks.
Running i3 ROM with SetCPU set to 100-1000 (On Demand).....it use to go into a deep sleep mode but now CPUSpy is saying its not. Any help?
Sent from my SPH-D700 using XDA Premium App
showmrock said:
Running i3 ROM with SetCPU set to 100-1000 (On Demand).....it use to go into a deep sleep mode but now CPUSpy is saying its not. Any help?
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
Pretty sure this is an issue across all of the Gingerbread leak ROMs. If I missed one that actually does go into deep sleep, please correct me
Sent from my SPH-D700 using XDA Premium App
Reflashed the ROM and it looks like its working again....interesting....
Sent from my SPH-D700 using XDA Premium App
showmrock said:
Reflashed the ROM and it looks like its working again....interesting....
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
Good to know..wait, isn't SetCPU discouraged on that ROM?
Sent from my SPH-D700 using XDA Premium App
JohnCorleone said:
Good to know..wait, isn't SetCPU discouraged on that ROM?
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
yeah you shoud let the system handle cpu control. I found setcpu to make performance slower..
@OP.. newer build is out fyi at acsyndicate
JohnCorleone said:
Pretty sure this is an issue across all of the Gingerbread leak ROMs. If I missed one that actually does go into deep sleep, please correct me
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
My phone sleeps like a baby for 89% on Bonsai v5.0.
This issue is usually something trying to sync and the modems being lousy on GB so far. Turn all syncs to manual, FB, Gtalk, emails, Twitter, all...and see if that let's it sleep. Also go into running services and see what apps are in memory. Stop ones that are not system and see if that does it.
Mine sleeps good on marcusiants rc10 rom... with ee03 modem, but wouldn't go into deep sleep with ec05 modem.
Sent from my SPH-D700 using XDA App
The DK28 modem is also known for this on GB. Also removing brightness.apk or lcdtest.apk can also cause this. And I have seen it right after instlling GB KB from the market, that right a KB ould keep it from going into deep sleep. Once we can tweak the kernels this will all be a thing of the past even if it isnt fixed in the final release.
How do I undervolt my GS2? Do I use SetCPU?
I'm currently using Gideons script. Works awesome. Look it up in the development section.
Sent from my Galaxy S2 using XDA App
Do NOT use SetCPU. It keeps the 2nd core constantly on which equals terrible battery. Use FauxClock or Gideons script. I recommend -75 mV
Thanks for the help
Is that true about SetCPU? Or is it an old wives tale......? You decide.
Sent from my SGH-T989 using xda premium
I'm using set CPU with no issues and I get great battery life. Less then 1% hour drain with screen off.
Sent from my SGH-T989 using xda premium
I screwed up and changed the voltages on my phone and battery life took a nose dive. I know I should of recorded the original settings but I didn't. Could some one please list what the original settings where and maybe some recommendations.
Samsung T 989
Disable what ever app that your using for voltage control and then reflash the kernel or rom and your stock voltage table will be restored'
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Thanks tried that but the numbers don't seem correct
Sent from my SGH-T989 using xda app-developers app
Lol.. as long as you have nothing set to set voltage PR frequency at boot and you reflashed your kernel them it is right. Its not one of those maybe situations..
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Sent from my SGH-T989 using xda app-developers app
What are proper figures for doing this?
Im sure this is a noob question but I messed with stweaks a bit and my phone has rebooted randomly twice since. Could this be why?
Problem just started and I've been running this problem free jellythunder!
Sent from my SAMSUNG-SGH-I317 using xda app-developers appl
I'm overclocked to 1.8 and undervolted all by -100. I've had it set on boot complete for about a month now and have never had any issues. I'm not saying you won't either but this is what's worked for me.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
45ACP1911 said:
I'm overclocked to 1.8 and undervolted all by -100. I've had it set on boot complete for about a month now and have never had any issues. I'm not saying you won't either but this is what's worked for me.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
I envy you. When I set -100 all phone gets stuck and reboots most of the time. when I set -75 still the same. Dirves me crazy.