[Q] OTA update fails - Defy General

Hi,
I'd like to find out why my ME525 Motorola OTA update now fails...it worked from 2.2 to 2.2.1 before, but I might have rooted and/or installed clockworm recovery and a ton of apks since then...
So here's what I get:
the OTA udate is downloaded, I get a notification that my phone will restart for installation, I press OK and after about 1/3rd into the unzipping/installation I get the picture of the Android robot and an exclamation point inside a triangle.
What do I do wrong?
I use TB to freeze the bloatware on my phone (some 40-some apks the last I've checked) so I was suspecting that it was the problem so I 'unfroze' everything in TB, rebooted and tried OTA again: same result.
Should I (or do I HAVE to?) wipe everything i.e: uninstall CWM recovery and TB before OTA? And if I do so, would re-rooting, and recover from a (TB and/or CWM) recovery backup undo the OTA update?
thanks for any help.

Rooting will stop the updates I believe and I am not sure if the recovery mod does.
It might be worth reflashing the firmware (make a backup of sms, settingst, etc)
Then with the moto bootloader format it to standard, clear cache, log back into Blur once rebooted and try the OTA again if available.

i had a similar problem with my htc wildfire. what you need to do is take off all the custom beta roms and put on the original rom. hope this helps

Thanks guys for the replies.
I've tried doing a factory reset and that didn't do it.
So I bit the bullet and finally did reflash my original sbf and as expected, the OTA update then worked.
Quite a job to bring everything on my phone back to the state it was though..
But on the bright side, I've done my first ever Defy RSD flashing and I've learned a thing or two...
And I finally have the v 2.2.2 Frozen Yogurt installed

Related

[Q] Upgrading to stock 2.2 rom with rooted phone (unrevoked 3)

Hi guys
I rooted my desire with unrevoked 3, and now I want to install stock froyo 2.2 update and it doesnt seem to work. It stops unpacking update after restart and shows exclamation mark and the droid, pressing menu from there brings up clockwork recovery. Is there any way to easily get this working or are the two options to either unroot or install custom rom?
In case of unroot, do I have to reflash the whole device loosing all settings and apps?
Hope someone has an answer for me, starting to get anxious to try the new rom out
Am having exactly the same issue. First I thought there was something wrong with the download as the Clockwork Mod says 'failed to verify full file'. Can someone help?
There are many stock roms with root access on this forum. Can't you just use one of them? If you flash the official upgrade, it will overwrite HBOOT as well, making it impossible to root the phone again until someone finds a new rooting method.
snowroller said:
Hi guys
I rooted my desire with unrevoked 3, and now I want to install stock froyo 2.2 update and it doesnt seem to work. It stops unpacking update after restart and shows exclamation mark and the droid, pressing menu from there brings up clockwork recovery. Is there any way to easily get this working or are the two options to either unroot or install custom rom?
In case of unroot, do I have to reflash the whole device loosing all settings and apps?
Hope someone has an answer for me, starting to get anxious to try the new rom out
Click to expand...
Click to collapse
Ok first of all since you have rooted your phone, did you make a backup? Did you use nandroid? Have you made a gold card? Okay this what I did with my phone. Use the stock ROM from UK 1.21.405.2 WWE version and flash that to your phone (rooted of course with gold card).
Once you have flashed the UK ROM you should get a system software update. BUT......you have to make sure you download one of the rooted Froyo that can be found in xda.
DON"T DO WHAT I DID AND USED A STOCK (unrooted) Froyo! Because now I can't root my phone until someone in here finds a way and shares it.
Ok, how do I flash one of the rooted roms and how do I go about installing it and still keeping the data on the phone? I know there are guides all over this place, but I find them a bit hard to understand a lot of the time...
Happy to use a custom Rom. There are so many here though - any suggestions?
rahul77 said:
Happy to use a custom Rom. There are so many here though - any suggestions?
Click to expand...
Click to collapse
Try them all It's fun and addicting.
But will flashing a custom rom wipe the device, and how do I go about getting all apps, sms'es and so on back on the device? I guess nandriod backup has something to do with it, but how do I use it right?
Titanium backup in market. Restor all data and apps. thet use all.
Titanium backup won't run...
Hmm, titanium backup is installed but it won't run claiming I don't have root or busybox is not installed. Installed busybox installer, it says I have root, but stops saying it might not have enough privileges or it is unable to mount...
What next? Anyone got any bright ideas? Thinking more and more about wiping device with a clean RUU and getting the stock 2.2 update, but would like to keep all my info, sms's and so on...

OTA 2.12.110.4, is it possible to install?

Hi,
I just noticed this was ready to download on my phone today. I downloaded and went to install, but the ClockWordMod Recovery doesn't let me install the update saying, "Image Verification Failed". I assume the problem is that the phone is rooted, and searching through the forums I heard this update isn't really anything big, just removing some German apps or something.
Is there anyway I can stop this update from notifying me? Or anyway to install? My phone is rooted but I'm not bothered about keeping it rooted as at the moment, there is nothing I need the phone to be rooted for. So, either way is fine for me.
Thanks!
If you want to unroot it, just flash generic ruu, more info here http://theunlockr.com/2010/06/07/how-to-unroot-the-htc-desire/
Than simply check for updates and update it
Or wait for few hours for rooted version of this rom
Hi!
I have a branded Desire and installed the update via Recovery. I had to disable the verification to do that (Goldcard inside). But all I got was a boot loop and my phone was derooted. I tried much (e.g. delete my data) and after a couple of hours I found the simple solution: Simply install the update again. Then I rooted my phone and restored the NANDROID Backup I made before I started the update because all of my data was gone.
Then I installed the Update again and this time it worked at the first time. All data was still there. I rooted it again and everything is fine. Don't know why my phone got a boot loop after first try but second try was perfect!
My suggestion: copy the zip from the download folder to the SDcard (made to a Goldcard!!!!) root and to the PC. Just if you need it more than once. Then make a Backup in the Bootloader. Then Install the update via Recovery. If anything goes wrong install the update again!

[Q] 12/15 - HTC Evo Maintenance Release - 3.70.651.1 CANT INSTALL HELP!

Hey my evo doesnt want to update it!!?? why??? it reboots.. then i get the loading thing that is starting to do it. but then i get the TRIANGLE WITH THE EXCLAMATION MARK.. with the little Android bOY.. LOL.. Could it be because its rooted? :/
HOPE ITS NOT BECAUSE OF THAT!! :/ HELP PLEASE
You don't need to install the latest 3.70 release...it is just a maintenance upgrade and has no improved functionality ...I hope you made a nandroid bc you can restore that to get back to your previous state. Good luck
Sent from my PC36100 using XDA App
Im new to all this man.. i dont really know anything.. like whats nandroid?? sorry for a stupid question.. but it says is has the Swype typing thing..
One more question.. what happens if i reset the Whole phone? like with the option it has to reset it to its FACTORY DATA RESET.. WILL IT WORK? OR WILL IT JUST NOT BOOT ANYMORE? OR WILL I STILL BE ROOTED? TH \ANKS
never accept a sprint upgrade with a rooted phone, it will mess your phone up...since you dont know what a nandroid is, im assuming you never made one..you are going to have to restore the phone back to original out of the box and a factory data reset is not the way to do it...
try this ...download the 3.30 release from this site and put in root of sd card http://shipped-roms.com/index.php?category=android&model=Supersonic
EDIT...in order for your phone to see this ..boot into bootloader..when phone is off, hold the volume button down and then hold the power button...the phone will see it and flash and update it...you will be back to stock and not rooted...you will have to re root the phone and then create a nandroid...
read this for more info on nandroid backup http://www.simplemobilereview.com/android-rooted-what-is-nandroid-backup/
to recap..never accept a sprint ota upgrade with a rooted phone, you will mess your phone up (as you already know) and once rooted, always create a nandroid...if you ever mess something up, you can restore that nandroid and restore your phone to working condition
also..once you are rooted and you want to update to the latest sprint over the air updates, search this forums for rooted stock RUU and you can then flash the lastest rom from sprint which is rooted...instead of trying to accept the OTA like you did
good luck
oK.. I WILL DO THAT WHEN I HAVE TIME.. LUCKLY MY PHONE DIDNT MESS UP TRYING IT.. LOL..
oK so installing the ROOTED STOCK RUU.. it will already be rooted, and i can still install sprints updates and upgrades with no problem correct?
THANKS FOR THAT BUD! SOUNDS EASY TO FACTORY RESET THE PHONE THANKS!!
drummer2780 said:
oK.. I WILL DO THAT WHEN I HAVE TIME.. LUCKLY MY PHONE DIDNT MESS UP TRYING IT.. LOL..
oK so installing the ROOTED STOCK RUU.. it will already be rooted, and i can still install sprints updates and upgrades with no problem correct?
THANKS FOR THAT BUD! SOUNDS EASY TO FACTORY RESET THE PHONE THANKS!!
Click to expand...
Click to collapse
Once you restore to factory non rooted and then re root...you have install the rooted ruu to get the latest sprint upgrades ...you don't accept any ota updates ever...just flash the most current rooted ruu and you will have the latest sprint updates
Sent from my PC36100 using XDA App
Oooh ok ok.. i think i get it.. THANKS! I APPRECIATED!!
weaselp1 said:
Once you restore to factory non rooted and then re root...you have install the rooted ruu to get the latest sprint upgrades ...you don't accept any ota updates ever...just flash the most current rooted ruu and you will have the latest sprint updates
Click to expand...
Click to collapse
Self confessed complete Android/Evo newbie here... I didn't even know how to access the settings on the phone until about 30 minutes ago. I've been working with iPhones since day one and have jailbroken many releases, so I get the general idea. It's actually my wife's "work" Android, and a co-worker of hers rooted the phone at some point. She tried to install the auto-download 3.70.651.1, it failed, and she gave it to me. Pulling the battery and resetting seemed to get things back to working, but now I'm taking over management of this phone and getting things right.
Here is where the phone is:
Nag screens about updated software seen. Update now selected. Update seemed to fail with a triangle/exclamation point, phone locked.
Pulling battery gets a normal reboot. Still get nag screen about "do you want to update"
Settings/aboutphone/software info shows "Software number 3.29.651.5" after failed update
Here's what I've done so far:
On software update screen, chose to "delete update". Rebooted. No more nag.
Turned off "scheduled check" for system software updates in Settings menu.
Figured out how to boot into the recovery menu. Looks like "Clockwork backup" was already installed. (ClockworkMod Recovery v2.5.0.1)
Created a nandroid backup using clockwork.
Rebooted phone
Mounted the SD card to my Mac, backed up the SD card including hidden files.
Verified creation of clockworkmod nandroid.md5 file
A few questions:
Once you restore to factory non rooted and then re root...you have install the rooted ruu to get the latest sprint upgrades Is this really necessary? Can I not just find a latest/greatest "rooted ruu" and overlay it on top of my current configuration?
I see some threads with titles like "[ROM] joeykrim-SDX-original-5.1 Odex *Stock Rooted 3.70.651.1* Dec 15th 2010". Is this an example of a "rooted ruu"?
This thread says I need to install "unrevoked 3.2.1" and "unrevoked forever". I'm guessing these are different tools than whatever was originally used to root my phone. Any chance installing them will conflict?
If I go back to a stock 3.3 ruu, what happens to all the applications and info already on the phone? Does it just overlay the software, or wipe everything clean?
TIA for helping an Android/Evo newbie out!

Help...Defy stuck in bootloop

I have a stock 2.1 defy with the 2.51 rom (i think). all the mod i did was root the phone using super one click, the phone ran fine for a few months until i experimented with titanium backup and deleted google talk etc. i found out that (too late)doing this would cause the android market to stop downloading and updating my apps. To remedy my situation i tried installing google talk service.apk back to system apps. first by copying the file to my sd card and pushing it to the system file using terminal emulator. after rebooting my phone is now bootlooping. i tried removing the battery and just after i insert it it would go immediately into the bootloop phase. tried using recovery (volume down+power) and wipe cache and reset, still no go. last resort i tried is after wiping i tried installing cm7 but the installation was immediately aborted. please help, right now im close to tears, i didn't know that it was this hard to mod a defy. my previous phone was a wildfire and modding it was pretty easy.
What happens when you turn the phone on? Does it start in the bootloader? Is it stuck in Motorola Logo?
Try to wipe data/cache again and see what happens.
As well you might want to go ahead and download all tools needed to flash an sbf. Because if worst comes to worst your going to have to flash one
Sent from my Life Proof Defy on CM7
juanplopes said:
What happens when you turn the phone on? Does it start in the bootloader? Is it stuck in Motorola Logo?
Click to expand...
Click to collapse
the phone turns itslef on automatically when i insert the battery, white moto logo first then bootloops in motoblur animation.i can go into bootloader mode by pressing up and power before inserting the battery. i just wished i hadn't played around with titanium backup. i already downloaded the necessary files to flash a new firmware. hope i learn to do it properly.
javi422 said:
Try to wipe data/cache again and see what happens.
As well you might want to go ahead and download all tools needed to flash an sbf. Because if worst comes to worst your going to have to flash one
Sent from my Life Proof Defy on CM7
Click to expand...
Click to collapse
i tried wiping the cache/data numerous times under recovery mode to no avail. now im crossing my fingers that my battery isn't that drained for me to flash a new firmware.
Try to wipe data/cache again and see what happens.
As well you might want to go ahead and download all tools needed to flash an sbf. Because if worst comes to worst your going to have to flash one
You can also do the battery hack/trick
Sent from my Life Proof Defy on CM7
Click to expand...
Click to collapse
i tried wiping the cache/data numerous times under recovery mode to no avail. now im crossing my fingers that my battery isn't that drained for me to flash a new firmware.
Click to expand...
Click to collapse
Sent from my Life Proof Defy on CM7
Hi I have the same problem,I just tried to flash the Barebone 1.5 ROM.
My Defy was stock,I just root it and made a backup with clockmod before I did as discribed here:
Installing (Rom wipes data/cache partitions)
1. Copy Barbones to sdcard: Barebones_15-signed.zip.
2. Boot into recovery (make a backup ?) and restore nandroid: 3.4.2_177-Nand.NORDIC_DEBLUR.zip.
3. Still in recovery, select install zip from sdcard -> choose zip from sdcard -> Barebones_15-signed.zip.
4. Reboot system, first boot will take time as it builds the dalvik cache; wait for the background to load, and enjoy Barebones.
- Use Easy Installer to install any apk's you feel are missing.
- Removed.Stock.Apps.zip
-- Removed Apps Must Be Copied To /system/app Manually - Remember To Set Permissions & Reboot
To downgrade back to Eclair; just flash the Eclair sbf you where using beforehand; thats it.
Click to expand...
Click to collapse
after Reboot it just shows Motorola,I can access Recovery Menu stock one and custom,tried wipe restore factory settings and wipe cache but nothing helped!
What version where you coming from ? Eclair or Froyo ?
Btw factory reset and wiping the cache doesnt do anything in these situations.
Did you restore the Nandroid provided ?
Also cant lie only thing I did not test was coming straight from an Eclair build.
I used the Korean Froyo sbf as a starting point; but I'm testing it now.
Got it alive again with this steps.
No wonder why u're stuck on motorola logo.
Let me break it down for you.
Make sure you have motodrivers installed or install them here.
And install the RSD Lite too Here
Turn off your phone, hit the power+volume up together.
Wait till u're in the bootloader.
Open the RSD Lite, u phone should be detected so u click on "..." select the .sbf u downloaded from here
And flash it.
Wait till is over, and your phone should be good again.
Click to expand...
Click to collapse
I used this .sbf
But I still don't know what went wrong,I did exactly as discribed in the TUT I postetd above!?
Well if you flashed that sbf you wont be able to downgrade back to Eclair anymore.
However; yes doing that will fix it.
Is it not good that I flashed this .sbf? I got the phone just 2 days ago I think it already had the newest firmware etc.!?
EDIT: But something is wrong with my Wlan connection it is very slow and always loses connection
I doubt it came with Froyo seeing as they are all leaked builds.
http://forum.xda-developers.com/showthread.php?t=966537 <- Read up
Just means you cant go back to Eclair.
Ok so you wifi is slow ? Are you even using my rom now; because you flashed 3.4.2_155-Stock.CEE_DEBLUR.sbf.
I cant see your phone so you have to tell me what your using.
Yes I just flashed the sbf nothing else,and before I just did what I read in the instructions from the Barebone 1.5 Thread.
1. Copy Barbones to sdcard: Barebones_15-signed.zip.
2. Boot into recovery (make a backup ?) and restore nandroid: 3.4.2_177-Nand.NORDIC_DEBLUR.zip.
3. Still in recovery, select install zip from sdcard -> choose zip from sdcard -> Barebones_15-signed.zip.
4. Reboot system, first boot will take time as it builds the dalvik cache; wait for the background to load, and enjoy Barebones.
- Use Easy Installer to install any apk's you feel are missing.
- Removed.Stock.Apps.zip
-- Removed Apps Must Be Copied To /system/app Manually - Remember To Set Permissions & Reboot
Click to expand...
Click to collapse
I tried this sbf before 3.4.3_11-Stock.UKTmobile_BLUR but it always failed thats why I tried the other one
So your not using my rom now - the sbf overwrites everything.
Ok sorry Im a noob^^ I just wanted to have all this blur stuff removed etc and your rom seems just perfect for me.
I have problems now with the phone and I really wished I would never had tried this.
I cant boot into recovery mode anymore with clockworkmod, I rooted my phone again installed clockwork but the screen stays black after the Motorola Screen came up when I try to make a recovery boot with clockwork.
cause I wanted to restore the backup I did with clockworkmod before I messed it all up,would that make my phone like it was before or not!?
I doubt you will be able to get back to your backup simply cause I dont think its Froyo.
So do this:
1. Boot into bootloader (power + volume up).
2. Flash 3.4.2_155-Stock.CEE_DEBLUR.sbf again.
3. While its rebooting after flashing hold volume down to goto stock recovery.
4. Do a factory reset.
5. Root your device using superoneclick http://forum.xda-developers.com/showthread.php?t=913709
6. Reboot.
7. Install 2nd Init Recovery http://forum.xda-developers.com/showthread.php?t=1032212
8. Reboot twice (to finish installing recovery).
9. Reboot into recovery - wait for blue led then hit volume down.
10. At this point you can try to restore your backup or flash a rom of your choice.
If you try your backup and it does not work you will need to start this process over.
Ok thank you so much fritolays for your help! I will try this tomorrow and post back if I had success or not!
greetz!
EDIT: Couldn't wait to try it and it worked! I took the risk and tried to install your rom again (restoring my backup didn't worked anyways 'cause clockworkmod didn't find the backup but it was still in the same folder it got stored before) works like charm as far as I could test it. But now I really have to go to sleep!
Big thanks again fritolays without your quick help I would still try to get my Defy to work without any success! and THANKS! for this great rom!!!
EDIT2: I don't know why but I have problems with the phone since yesterday when I first flashed another ROM,I always have Network Connection Problems now! I can't download anything from the market if I get to the market! 'cause normally it says no network connection! It worked fine for like 20minutes after I got it to work with ur method u told me above then it suddenly took very very long to download an app. Never had these Problems before,I also have very bad Phone Signal and most of the Time I can just make Emergency Calls and I turned Internet Connection OFF for mobile network (like I did before when it was stock) but sometimes I still can go online with Wlan turned off so this is really ****ed up 'cause I have no internet plan with my mobile phone!
But with your ROM the phone is really flying,I did a Benchmark Test before and got 1100 Score and by just putting your ROM on my Defy without any overclocking or something like that I got 1275 Score!
EDIT3 I found the direction it was clockworkmod/backup/ now
I did a wipe factory reset and a cache wipe and now restoring it I really hope everything is like it was before all this!
Ok this got me to the Bootloop Problem again so I did again all the steps u told me and instead of restoring ur ROM I restored my backup wich was now in the right direction,but it is also ended up in Bootloop!
EDIT4 If I try all this with ur ROM it works,is it because of the Froyo .sbf I flashed that I can't get my backup working!?
I get this Error Message after my phone booted with ur ROM maybe that is one of the Problems I have? "Sorry,the process android.process.media got suddenly closed try it again" I had to translate it so maybe the message is a bit different in english but thats what it says generally.
So everything worked great again,I go into Market to download TitaniumBackup (like I always did) then as always I apply the new Busybox Install TitaniumBackup suggests everytime I start it and the Wifi gets slow already by downloading Busybox. Then I tried to go to the Market again and Network Error, I get the feeling it has something to do with this app or the Busybox installation TitaniumBackup is doing!?
I don't know what it is but it alwys messes something in my phone up and I get Wifi Probs!??
EDIT5 I tried another ROM now "xd1 ** new ** ver 1.2" and everything worked fine! I downloaded Quadrant and a Antivirus App just to test it and everything was alright so I tried TitaniumBackup again (the Free Version as always) and guess what the download got fast till 42% then stuck and now I can't download anything again from Market it is very slow and then the downloads got canceled! wtf is wrong with this app!? I need it for all my Apps 'cause I did a backup with this app but since I flash custom ROMS it always does this bull**** when I download it from market!?
update..got my defy unbricked by following Higgsy's step by step method. installed a 2.51 SEA sbf in the process. love the phone without blur. now im thinking of upgrading to a froyo rom, which do you guys think is the best? based from reading the posts here i'm more confused than ever. sbf's here and 2nd init that??? not to mention a fixed sbf?? i really can't understand these terms and the more i read the more i got confused. Could you guys help me in laymans terms the proper process for upgrading to froyo and which rom is you think is best??

[Q] MMS not working after rooting

Hi everyone.
So a few weeks ago I decided to root my HTC One. I was fairly new to rooting, and I still am. I used the rumrunner tool to get s-off. Then, I used adb to get CWM recovery, and after trying out a few different roms, I decided to stay on stock HTC Sense 5.0. Well, I downloaded Xposed and that's when my problems started. I downloaded Gravity Box, Sense 5 Toolbox, and Tinted Status Bar. After using these all for a while, I started to notice something. First off, all my notifications were expanded automatically, which I didn't like. Then, I started noticing that MMS messages would neither download, or send. I tried uninstalling the Xposed modules, and Xposed itself, but that didn't change anything. These things could've started happening prior to installing Xposed, but I didn't notice them until after I'd installed the other modules. Anyways, I got tired of it, and decided to factory reset my phone, thinking it would fix the problem. Of course, before resetting I made a back up in CWM, in case the reset didn't work. It didn't. And the reset deleted my back up. So now, my phone is factory reset, and still won't receive MMS messages. I've also tried messing with the APN settings, but that didn't help at all. I've tried looking around for some answers but I can't seem to find anything. I'm s-off, stock, and rooted. I'm pretty upset at this point and just want this fixed. Any suggestions? Would unrooting my phone solve the problem?
So you factory reset but didn't actually re-install the rom? Try going into recovery and wiping data/cache/davlik and installing the OTA stock rom from here: http://forum.xda-developers.com/showthread.php?t=2485319
I still have the stock 4.2.2, Sense 5 rom. This might sound like a stupid question, but can I install the 4.3 stock rom as an update, without having to wipe everything? I've already started setting everything up again, to the way it was before, and I really don't want to start over again.
Mono41 said:
I still have the stock 4.2.2, Sense 5 rom. This might sound like a stupid question, but can I install the 4.3 stock rom as an update, without having to wipe everything? I've already started setting everything up again, to the way it was before, and I really don't want to start over again.
Click to expand...
Click to collapse
If you're S-off I believe you can flash the stock recovery and take the OTA then flash TWRP again and the supersu zip to root. What did you set up exactly? If they're apps just use Titanium backup and restore them later
Crawshayi said:
If you're S-off I believe you can flash the stock recovery and take the OTA then flash TWRP again and the supersu zip to root. What did you set up exactly? If they're apps just use Titanium backup and restore them later
Click to expand...
Click to collapse
I set up things like my homescreens, restored my text messages, downloaded all my offline music from Google Play, restored app data, system settings, and I moved all my pictures and things from my computer onto the phone. Anyways, I flashed the 1.10.605.15 stock recovery and tried to install the OTA, but it gets a little under a third of the way through before it fails and gives me a red triangle with an exclamation point.

Categories

Resources