Related
1st STEP: You need the MaUpgradeUt_NoID.exe File. The purpose of this file is to avoid any ERRORS while upgrading any part of the ROM.
2nd STEP: You need to get a hold of the ROM file so you can extract the necessary files from it. This is provided by the phone manufacturer.
****To extract the file, someone recomended WinRAR. If you don't have it, follow this: Go to
My Computer
Your Drive (mine is Drive C: )
Show the contents of this drive
Documents and Settings
Choose your folder name
Local Settings
Look for the "Temp" Folder
Choose "TOOLS" from the menu bar
Choose "FOLDER OPTIONS"
Click on the "VIEW" tab
Click on "HIDDEN FILES AND FOLDERS"
YOU WANT TO SHOW ALL HIDDEN FILES AND FOLDERS
3rd STEP: You need to extract the following files namely and add the MaUpgradeUt_NoID.exe File. These 10 files are found in one of the folders within the "TEMP" folder after running the file you got from Step 2.
ms_.nbf----------------------this file is responsible for EXT ROM Version
nk.nbf------------------------this file is responsible for Windows Mobile Version
radio.nbf---------------------this file is responsible for Radio Version
EnterBL
GetDeviceData
readme
ROMUpgradeUt
RUU.conf
RUU.dll
UI.dll
MaUpgradeUt_noID
*****You need these 11 files if you want to upgrade the ENTIRE ROM.
*****If you only want to upgrade to the RADIO VERSION then you need to delete 2 files namely: "ms_.nbf" and "nk.nbf". Leave "radio.nbf". So there are 9 files on it.
NOTE: The "TEMP" folder has many folders within it. It is your job to look which folder was created upon running the .exe file from step 2. You need to copy those 10 files and paste them on a new folder.
4th STEP: After gathering the necessary files and choosing which part you want to upgrade and keep, you need to put your device to boot loader mode by pressing 3 buttons simultaneously:
Power Button
Backlight Button
Reset Pin
5th STEP: Plug your Universal via USB. Wait for your computer to recognize a newly plugged device.
6th STEP: Now you are ready to upgrade. Double click the MaUpgradeUt_NoID.exe File to run it and follow the on screen instructions.
Hope this helps. Good luck.
Hi...
Nice guide indeed..but u forgot one important step....that is hard resetting after the complete upgrade... :lol:
I saw a thread somewhere which advised against hard resetting at the end of the procedure, so I did a soft reset instead. All worked perfectly.
Thanks for the input guys. I also remember, I did not perform a hard reset myself, just a soft reset at the end. But I choose not to include that on the steps as the computer will show a window as to what you're supposed to do or press during the upgrade anyway.
great post!
AG
radio version? Windows Mobile version? and EXT Rom?
cktlcmd, You wrote in your first post about deleting one or 2 of the files to tailor which or all 3 of the versions you want to upgrade? I don't get it? What are the differences between the three? Who wouldn't want to upgrade everything? I have an o2 Exec in the USA. I changed the ROM to I-Mate, but it is still so bad. I have to reset the phone all day long. I am trying to reload the Jasjar rom or the other ROMs to just try something to maybe see if it will perform better. I have downloaded and used Pocket Mechanic and done a few other things recommended but nothing has seemed to have an improvement over freezes I get all day long. Have any advice? Thanks,
Re: radio version? Windows Mobile version? and EXT Rom?
tmglobe2004 said:
cktlcmd, You wrote in your first post about deleting one or 2 of the files to tailor which or all 3 of the versions you want to upgrade? I don't get it? What are the differences between the three? Who wouldn't want to upgrade everything? I have an o2 Exec in the USA. I changed the ROM to I-Mate, but it is still so bad. I have to reset the phone all day long. I am trying to reload the Jasjar rom or the other ROMs to just try something to maybe see if it will perform better. I have downloaded and used Pocket Mechanic and done a few other things recommended but nothing has seemed to have an improvement over freezes I get all day long. Have any advice? Thanks,
Click to expand...
Click to collapse
I have tried all ROMs that came out on this site. The ones I recommend are only 2:
1st: QTEK's latest ROM
2nd: JWright's Modified ROM
From my post above these 3 files determine which part you want to upgrade:
ms_.nbf----------------------this file is responsible for EXT ROM Version
nk.nbf------------------------this file is responsible for Windows Mobile Version
radio.nbf---------------------this file is responsible for Radio Version
If you look at my signature below. I am using TMobile's Radio while using JWright's Modified ROM. It all depends on you which combination you feel is more stable. On my Universal, I never had any troble no matter what ROM I used, but these 2 I listed above surpasses any ROM released by other manufacturers on my opinion.
Pantaloonie said:
I saw a thread somewhere which advised against hard resetting at the end of the procedure, so I did a soft reset instead. All worked perfectly.
Click to expand...
Click to collapse
Yeah I heard the same thing, I did a soft reset after installation and it worked fine.
error 120 country id
Ok, so which of the three files is responsible for the country id error 120?
I am trying to upgrado my os xda exec to the latest JASJAR_WWE_19096_19505_11300_AKU_3_2_ship rom but I keep getting the same error again.
Please, I need help.
Thanks. Antonio Mota
artcsmota said:
Ok, so which of the three files is responsible for the country id error 120?
I am trying to upgrado my os xda exec to the latest JASJAR_WWE_19096_19505_11300_AKU_3_2_ship rom but I keep getting the same error again.
Please, I need help.
Thanks. Antonio Mota
Click to expand...
Click to collapse
What 3 files? If you are referring to the .nbf files, none of them are responsible. Follow the instructions above and keep repeating them, sometimes it takes more than one try for the Error 120 to disappear according to some who experienced it.
cktlcmd said:
1st STEP: You need the MaUpgradeUt_NoID.exe File. The purpose of this file is to avoid any ERRORS while upgrading any part of the ROM.
Click to expand...
Click to collapse
A great post, Upgraded my O2 Exec using your procedure, worked a treat, Thank you!
Wooky
cktlcmd said:
ms_.nbf----------------------this file is responsible for EXT ROM Version
nk.nbf------------------------this file is responsible for Windows Mobile Version
radio.nbf---------------------this file is responsible for Radio Version
EnterBL
GetDeviceData
readme
ROMUpgradeUt
RUU.conf
RUU.dll
UI.dll
MaUpgradeUt_noID
Click to expand...
Click to collapse
I'm being really thick today and struggling here. I've downloaded
JASJAR_WWE_19096_19505_11300_AKU_3_2_ship.zip
MaUpgradeUt_noID.zip
T-Mobile_ExtROM.zip
and unzipped them.
The .nbf files are not present, althought the _ship.zip was 70mb before unzipping so I guess this contains everything :s
Is there an idiot's guide for installing this acclaimed ROM on an MDA Pro?
When I run the maupgrade tool, the wizard shows an image of an imate Jam (or something like that, not a Universal) but tells me it runs OK.
The T Mobile ext rom also shows the "wrong" HTC device but claims to run OK.
The main JASJAR_WWE_19096_19505_11300_AKU_3_2_ship.exe just gives the "120" error complaining of the wrong device (although the picture is of a universal this time at least)
Please tell me what I'm doing wrong, I'm going quite mental here
resetting
Please excuse a noob question, but earlier the discussion was about the type of reset to do after the ROM upgrade. As per instructions in the s/ware, I did the cold boot. All is perfect - thanks.
If I needed to perform a hard reset at any point in the future, am I correct in assuming this would just reload the new ROM or would this reload the old O2.
Many thanks
Mav
xiasma said:
I'm being really thick today and struggling here. I've downloaded
JASJAR_WWE_19096_19505_11300_AKU_3_2_ship.zip
MaUpgradeUt_noID.zip
T-Mobile_ExtROM.zip
and unzipped them.
The .nbf files are not present, althought the _ship.zip was 70mb before unzipping so I guess this contains everything :s
Is there an idiot's guide for installing this acclaimed ROM on an MDA Pro?
When I run the maupgrade tool, the wizard shows an image of an imate Jam (or something like that, not a Universal) but tells me it runs OK.
The T Mobile ext rom also shows the "wrong" HTC device but claims to run OK.
The main JASJAR_WWE_19096_19505_11300_AKU_3_2_ship.exe just gives the "120" error complaining of the wrong device (although the picture is of a universal this time at least)
Please tell me what I'm doing wrong, I'm going quite mental here
Click to expand...
Click to collapse
Actually, you are on the right track. Now you need to run the HUGE FILE you mentioned that is about 70MB. That is the REAL file you want to extract which contains the 10 files necessary for upgrading listed on my procedure. Follow my instructions once you run this file. Follow the instructions on where you will find the files.
mavrik64 said:
Please excuse a noob question, but earlier the discussion was about the type of reset to do after the ROM upgrade. As per instructions in the s/ware, I did the cold boot. All is perfect - thanks.
If I needed to perform a hard reset at any point in the future, am I correct in assuming this would just reload the new ROM or would this reload the old O2.
Many thanks
Mav
Click to expand...
Click to collapse
YES, if you perform a hard reset. The new upgraded ROM will be the default ROM restored on your device.
cktlcmd said:
Actually, you are on the right track. Now you need to run the HUGE FILE you mentioned that is about 70MB. That is the REAL file you want to extract which contains the 10 files necessary for upgrading listed on my procedure. Follow my instructions once you run this file. Follow the instructions on where you will find the files.
Click to expand...
Click to collapse
Thanks, but I have tried running
JASJAR_WWE_19096_19505_11300_AKU_3_2_ship.exe
and it's still giving the 120 error.
OK, from scratch.
I've just run the MAUpgrade exe and that ran *very* quickly.
I've now ran the T-mobile ext ROM upgrade, hard reset.
When the \extrom autoruns, should I just select T Mobile UK? Or cancel?
xiasma said:
Thanks, but I have tried running
JASJAR_WWE_19096_19505_11300_AKU_3_2_ship.exe
and it's still giving the 120 error.
OK, from scratch.
I've just run the MAUpgrade exe and that ran *very* quickly.
Click to expand...
Click to collapse
I think you are doing what I was when it finaly clicked.
By the way, thanks to cktlcmd for the breakdown of the process.
The bit you will need to understand is that when you run the .exe, it unpacks the files into a folder in the Temp directory cktlcmd mentions. All i did then was to search for one of the files listed and i found the folder that way. I then copied the files into a more convinient folder and added the MAUpgrade as per the instructions. Once i did this, running the MAUpgrade does as described.
I know this may seem a bit long winded, but I got there in the end. Also, by saving the contents of the folder elsesware means I can play with it later as also discribed by cktlcmd.
The JASJAR rom is sofar great.
Thanks for all your hard work cktlcmd
regards
Mav
i have tried several Universal ROMS and all the upgrading is halting/freezing at Stage3: CE ROM upgrading... at 19%
all the ROMS (ivan beta14 - 1.90.96) are frozen at same level at 19%
what can be the problem or which way should i use to flash my MDA Pro ?
thanks
fuhayer said:
i have tried several Universal ROMS and all the upgrading is halting/freezing at Stage3: CE ROM upgrading... at 19%
all the ROMS (ivan beta14 - 1.90.96) are frozen at same level at 19%
what can be the problem or which way should i use to flash my MDA Pro ?
thanks
Click to expand...
Click to collapse
Have you tried my instructions yet? Try downloading the files again. Sometimes they get corrupted.
it is fixed by flashing with original t-mobile 1.30.232 rom.
but when i flash ivanb14 it is again freezing at 19% of stage3.
what can be the problem ? i have downloaded the ivanb14 rom 3 times and i receive the same error message.
I have downloaded the RAR file, but after taking a look at it I can see that it is not like any ROM updates provided by Bell. Can anyon some instruction or point me to another thread that explains this??
Thanks
1)after you download it just extract the file in a new folder
2) Then goto that folder and u will "ROMUpdateUtility" double click on that.
3) just follow the instructions that appears on your computer screen after.
I'm thinking he probably doesn't have WinRAR.
loll thenn ill add another step:
4) download WINRAR and extract the files.
then follow my other other steps.
Do the CDMA Roms require a HARDSPL to flash them? I want to flash a CMDA NSFAN Rom to my friends Vogue and I dont see an stickies for flashing a CDMA rom. I normally spend most of my time in the Kaiser/Raphael Forums.
Any help is greatly appreciated.
Thanks,
Daniel
So I just did a ton of research on the web because the wiki is useless and might as well not exist.
I am using a Sprint HTC Touch with the official Sprint WM6.1 ROM from HTC.
So after my research, this is what I got (Please correct me if I am wrong):
1. Run 2.31.Coke and unlock the phone via USB/ActiveSync
2. Download NSFAN's latest Sprint WM6.1 Rom and extract to desktop
3. Rename ROMFILE.nbh to voguimg.nbh
4. Copy voguimg.nbh to MicroSD card that has been formatted to FAT32
5. Insert MicroSD card in phone, and enter bootloader via holding down the Power/Camera/Reset buttons all together.
6. Flash ROM
7. Hard Reset Phone
8. Enjoy
So to the everyday flasher here on the Vogue forum, are these steps correct? And if so, why dont you take the time to update the wiki so people dont have to ask the same repetitive question 1000 times?
I just cant believe that this forum has zero ROM flashing stickies, or and updated wiki.
Either way, any help would be greatly appreciated.
Thanks again,
Daniel
atomixpaintball said:
So I just did a ton of research on the web because the wiki is useless and might as well not exist.
I am using a Sprint HTC Touch with the official Sprint WM6.1 ROM from HTC.
So after my research, this is what I got (Please correct me if I am wrong):
1. Run 2.31.Coke and unlock the phone via USB/ActiveSync
2. Download NSFAN's latest Sprint WM6.1 Rom and extract to desktop
3. Rename ROMFILE.nbh to voguimg.nbh
4. Copy voguimg.nbh to MicroSD card that has been formatted to FAT32
5. Insert MicroSD card in phone, and enter bootloader via holding down the Power/Camera/Reset buttons all together.
6. Flash ROM
7. Hard Reset Phone
8. Enjoy
So to the everyday flasher here on the Vogue forum, are these steps correct? And if so, why dont you take the time to update the wiki so people dont have to ask the same repetitive question 1000 times?
I just cant believe that this forum has zero ROM flashing stickies, or and updated wiki.
Either way, any help would be greatly appreciated.
Thanks again,
Daniel
Click to expand...
Click to collapse
You are correct, but you do not need to do steps 3 thru 5. After you extract the ROM on your desktop simply doubleclick the RUU utility and it will update your ROM. (you must still be connected via USB to computer) If you want to flash from your storage card instead then do steps 3 thru 7.
I have a bell phone,
and the color screen says .36 and Security Unlocked.
do i have to unlock the phone still ?
its a bell phone, and it was like that when i got it.
does this mean its unlocked?
latinjig said:
I have downloaded the RAR file, but after taking a look at it I can see that it is not like any ROM updates provided by Bell. Can anyon some instruction or point me to another thread that explains this??
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=3680838&postcount=2
Detroit Doug
By the way, who needs WinRAR when you can get 7-Zip, the best all-around file compression/decompression tool around! And it's free. Opens almost anything out there all in one program.
http://7-zip.org/
hey..
i just had a quick question.. is it possible to switch back to the original BELL rom after you upgrade to NFS rom? i know a lot you might think why would you even wanna do that? But I was just wondering just incase..
Absolutely very easy just flash it like the instruction of a stock rom would require you too
QUICK guide How-To Update your Diamond ROM
Well , I have been one of those guys that are not so go with the whole updating the ROM things...
So I have finally did it... after weeks of pain.
These are the steps to update your ROM.
Try follow these Steps and you should be fine
Step 1
You will need to HARD-SPL your phone...
You will need to download the Unsigned-Hard-SPL-Diamond-OliNex.zip
http://forum.xda-developers.com/showthread.php?t=400950
Download, extract to an empty folder.
Run RomUpdateUtility.exe, Have Phone Synced with PC in Windows Mobile
follow steps, check device for prompts after PC shows loading bar. it should to black screen now.
SPL flashes, device automatically reboots, job done.
to confirm you got it installed, go into bootloader mode (volume down + reset, i.e. press volume down button and reset then keep holding the volume down key until you see tricolour screen) and verify the screen shows 1.40.OliNex.
note: you will not see the SPL version during normal boot, that is the OS version, not SPL!
Step 2
Diamond Custom RUU Updater Software
You will need to download DiamonCustomRUU.zip
http://forum.xda-developers.com/showthread.php?t=396073
Download the software
Extract to a folder on your desktop
When you are ready to update the phone, copy the ROM file into that folder
*** Remember to RENAME the file to RUU_signed.nbh
Step 3
Download a ROM
There are many fine ROM on the forum, choose one that you like.
Here is one you can use
http://forum.xda-developers.com/showthread.php?t=563245
I hope this helps some people that have struggled to make sense of it all. Please remember there are complete "Bibles" on how to do this. The above is just a quick how-to.
Other Guides you can view (which are excellent)
http://forum.xda-developers.com/showthread.php?t=416211
I think we should thank all the guys that made the HARD-SPL,Updater and ROMS
TOM_Codon
Michal_banszel
Cmonex
http://forum.xda-developers.com/showthread.php?t=416211
Just keeping it simple
Just keeping it simple.....
Well I think you did a great job! The thread he linked to may be too compliant. You keep it clean, so it's easy for noobs to learn the basics.
Thank you.
Excellent
Dekster thank you for making it easy for me to do this rom thinge. I was a very confused with all the stuff on the other posts, yours put me on the right track and sorted me out. i am new to all of this stuff.
so far so good.
Elo
Nice work
You really made it easy! Thanks!
Good day,
I have a problem I follow all the steps at this site tutorial to install android without windows Mobile, but It happends that android cant boot properly it gets an error
"Unable to open persistent property directory /data/property error 2"
my question is there is a way to fix it and put android back or should I reinstall WM, and how reinstall it??
I used:
KAIS-480Type3.nbh
thanks for your atention and help
root.otavio said:
Good day,
I have a problem I follow all the steps at this site tutorial to install android without windows Mobile, but It happends that android cant boot properly it gets an error
"Unable to open persistent property directory /data/property error 2"
my question is there is a way to fix it and put android back or should I reinstall WM, and how reinstall it??
I used:
KAIS-480Type3.nbh
thanks for your atention and help
Click to expand...
Click to collapse
Hello It seems you're new so welcome! (I'm pretty new myself)
You need to post this question in the build thread you are using (ie: if you are using KaiserDroid, post in that thread, if in Poly's build use that thread).
Also, if you are using Poly's build if you read the instructions thoroughly there is an easy procedure to fix this.
I am not sure about KaiserDroid because I never had this problem with KaiserDroid so I never had to look.
solved
I solved the problem, if someone is passing the same as me and your phone still booting you just need to press camera button and then with the stilus the reset button. and you will be able to reflash it
This is not a problem.
You never pressed the middle key to actually install a Android ROM(the file you flashed was under 10MB). Your phone was successfully flashed with dzo's setup, all you had to do was throw an android build in your andboot folder on your SD card..reset the phone and press when promoted, in linux, to enter the android installer.
So I am trying to follow the instructions found on the wiki (I'd like to it but the forums are preventing me from posting URLs at the moment) for installing Android on my HTC AT&T Tilt device and I was wondering, where do I download the system.img for Android from? I've been searching around online and cannot find it anywhere...
Many Thanks,
~Jeff
www.androidonhtc.com should have everything for your device
more specifically http://www.androidonhtc.com/wiki/Latest_Builds_(Kaiser) for kaiser http://www.androidonhtc.com/wiki/Latest_Builds_(Polaris) for polaris and http://www.androidonhtc.com/wiki/Latest_Builds_(Vogue) for vogue
R3TR3C said:
should have everything for your device
Click to expand...
Click to collapse
Thanks, I had downloaded the files from that page. It was just confusing because the step by step reads like you need to download a system.img from somewhere when this file in generated when you install Android. Got it loading... Now on to figuring out why it won't boot!
~Jeff
JeffHoogland said:
Thanks, I had downloaded the files from that page. It was just confusing because the step by step reads like you need to download a system.img from somewhere when this file in generated when you install Android. Got it loading... Now on to figuring out why it won't boot!
~Jeff
Click to expand...
Click to collapse
What do you mean when you say "won't boot"? Does your phone show the Linux logo and rolling text, does it show a boot logo animation. Give us some hints and we'll try and sort this out for you.
edit: I see you started another thread, I guess you are working out your issues in that one instead.
binlabin said:
edit: I see you started another thread, I guess you are working out your issues in that one instead.
Click to expand...
Click to collapse
Yea, sorry. One issue for one thread. Keeps things more organized.
~Jeff
linux logo and scolling txt
well, i will hijack her thread since i am at that point.
i did follow the wiki and downloaded the files for the kaiser. i looked at the files and noticed a zimage but no system img file. do i need to compile the package on my linux box then put it on the sd card to run the haret file?
System.IMG/SQSH is deprecated. Use a androidinstall.tar build such as myn warm android. Everything there work including BT and camera.
As thebulletfromhell said, the system.img/sqsh file method of installing Android is now very outdated, and the more mature builds are using the Androidinstall.tar method, this method has several advantages, a menu driven installer, easier updating, greater stability, less problems caused by mis-matched rootfs/system/zimage files.
The two main builds at the moment are; Myns Warm Donut : http://forum.xda-developers.com/showthread.php?t=619980
And Polyrhythmics Eclair 2.1 : http://forum.xda-developers.com/showthread.php?t=600154
Both of these are probably the best supported and most widely used ports to Kaiser hardware.
There are other builds of course, but as a newer user of android I'd recommend these two first.
Hello. I had some troubles running Android on my HTC TyTN II.
The system boots but I see on the console an error message saying "can't find system.img" or something similar.
I downloaded the latest versions of everything but androidinstall.tar is not enough.
i have same problem
Its due to the kernel's Sys & Data boot parameters. Just use any of the newer kernels which carry support for both NAND and SD