Hey guys need some help, need to fix the microphone for a friends phone and i cant find any on Ebay or Google, so if someone can help me find the part, i will be greatfull
thanks
Look for the smallest eletret SMD microphone. That should fit. If it is just the microphone and not the circuitry.
Mouser and Digikey have a bunch and I bet you can find a one-off at octopart.
Related
I think that i have read somewhere on the internet about maintenance manual for universal, may anyone has it or its link?
If no, how to disassemble my universal, the LCD coaxial cable is damaged, and i cannot hear the sound from the side speakers (the media files or ringtones) hear only the sound of call from the ear speakers on the screen side. I have read a thread before from fluffcat1, he said that he knows how to disassembe univresal and also how to repair the cable if the damage is minor which may be true in my case. Please help me, the new cable is too expensive in my country. Thank you very much in advance.
37 views aND ABOUT 3 DAYS WITHOUT ANY REPLY, I HOPE FLUFFCAT1 WAS NOT AMONG THOSE VIEWERS.
Anyway, this is my experience, may it beneifit anyone here. I decided to open my Univ. downloaded the service manual from the internet and dollowed the steps to tear it down. I didn't completely dissassembIe it, I found that a main part of the cable exposed after removing the base of the device, I fixed that part wirh a piece of paper, and i think the device is working good now, except for sporadic call drops. Do u think that this drop is attributed to the cable, or as I think it is a separate issue?
Hi,
Have a look at ftp....
You can also dl it on the site where I'm moderator...
Here the link...http://www.planete-htc.com/index.php?mod=forum&ac=voir&cat=81&id=4293
Have fun
Bonisalive from planete-htc.com
Hello. Have problems when calling, I can hear the other person, but not the viceversa. So I think is the microphone.
Can someone tell me where is the microphone located ?
It can be changed ?
Where can I find one to buy or something compatible ?
Thanks !
http://wiki.xda-developers.com/index.php?pagename=BA_Technical
you can prob find it here
Thanks a lot, I looked and the best information was "bottom", this was predictable because you speak in it and can be somewhere else but bottom.
I am not worried about the finding problem, but if you can tell me if it is hard to change, you can change it without breaking any wires and after you need to put it again to their places ? I am asking because I don't have the tools for this kind of operation.
Nobody changed the microphone to a Blue Angel ? At least I need a genuine Blue Angel microphone ?
Regards!
Hey there, You just need a T6 Torx screwdriver to get into the case and the microphone is a small metal unit that slots into the case and has two wires leading to it.
I took a BA apart for the first time this week and it's really easy. Swapping the microphone is as easy as undoing 6 screws, splitting the case then swapping the microphones.
If you're stuck for a replacement then let me know - I'm currently ripping apart a BA with a motherboard fault. The Mic is known to be good.
Cheers!
I was able to get my Kaiser after someone at my work dropped theirs and since AT&T won't cover damage they ended ordering a new one and I decided to replace the screen which was BADLY broken but otherwise worked. What I didn't know was that the contacts on the earpiece speaker were being held in be the case.
I am looking to get a replacement 'earpiece', aka conversation speaker, for my Tilt but I cannot seem to find it anywhere online including ebay. So far I have found a few repair shops that would be willing to fix it if I send it in but as I have already successfully replaced the LCD I prefer to do the work myself. Does anyone have the part they would be willing to sell me or know of a company that would sell just the part. I have a bluetooth headset but it would be REALLY helpful to have the earpiece speaker working again since windows can be flaky when it comes to answering the phone using the headset.
if your going to do the work ur self ur going to need a soldering iron and possibly an ohmmeter (electrical evice measeuring electrical resistance ect) u would need to ohm out the speaker in the phone and u might be able to use a headphne speaker if u used a resistor with a head phone to get correct ohms for the speaker to work beacause u need the same ohms or it coul draw too much or too little current from the amplifier and the battery and if that doesnt work speakers in commercial devices are usually genaric made in korea or china u could try speaker from a different phon hopefully a cheap phone, hope i helped in some way
din,
Not looking to fix the component.
I was hoping to just replace the actual component, as I am not trying to fix the broken speaker or try to fit a different speaker into my phone. If I can't find a place to buy the speaker I probably will have to get my work to but me a phone and it will likely will be a Blackberry as that is our corporate standard.
Somehow ( don't ask ) I've manage to broke my desire's microphone. It's a tiny rectangular , shielded , smd mic. As I've heard it has a digital output on the chip . Does anybody know what type is it or the producer , or where can I find it ? I'm willing to buy even a broken MB with the mic on it .
Thanks ,
L.
liciniu said:
Somehow ( don't ask ) I've manage to broke my desire's microphone. It's a tiny rectangular , shielded , smd mic. As I've heard it has a digital output on the chip . Does anybody know what type is it or the producer , or where can I find it ? I'm willing to buy even a broken MB with the mic on it .
Thanks ,
L.
Click to expand...
Click to collapse
Might be worth contacting someone like this http://www.globaldirectparts.com/HTC-Desire-Replacement-Repair-Parts-s/6282.htm they seem to have plenty of spare parts and might have a mic kicking around. Failing that it's either spares or repair on ebay (they don't seem to have many and are still quite expensive for a broken phone) or there may be some folks here with broken desires willing to donate to restore one back to its former glory
Thanks for the reply . Finally I've found a broken motherboard and swap the mics. It wasn't easy...
Ive managed to do the same thing... how the hell did you get that thing of and replace it?
Hello there,
I have a big problem with my desire hd , my microphone stopped working , so i tryed to unsolder it and solder new , but in the process i wiped the 4 pins underneath the microphone , so I'm asking if somebody had schematics for this phone so I can trace wire path of the microphone and try to solder it there.
Also i read over the net for the method of change deffective mic with new universal mic and 4.7kO resistor , but there weren't any more explainations, so if somebody knows and wants to share info will be glad and thankful.
10x in advance.