Related
hi,
i want to root my phone, but i've been told to downgrade.
my software version is 1.75.
my phone is quite new, 2-3 weeks ago.
i tried all the methods and i downloaded PD98IMG.zip(1.32 firmware).
after entering the Bootloader, and it checks the zip file, at the end it says::
CID incorrect!
Update Fail!
after checking online, people said that if its branded, it wont work, unless you use a goldcard.
when opening my phone, it brings a Virgin Media logo (from london, uk), so im guessing its branded.
so i formated my 8GB sd card, and installed the goldcard, yet the message still appears!!!
CID incorrect!
Update Fail!
did i do something wrong?
does the type of sd card i have effect a goldcard?, because i think i have a rubbish 8GB sd card, since the original sd card didnt come with the phone when i got it!
HBOOT-0.85.0018
Dec 17 2010, 00:29:52
is there something more i should do? or is there a way to root the phone with 1.75?
ps: im new to android phones, but have a little background in linux.
Did you use mmc2 while making the card?
Only MMC1 and MMC0 are available...
and MMC1 which is the default one didnt work, but MMC0 did.
i used a better sd card, -- transcend, and with this, after making it a gold card, and putting the zip file on it, the bootloader wouldnt recognize any image
If it does not work, it is not better
Only mmc0 and mmc1 are available?? Do not use disk drive mode, and use mmc2. That is the only one that will work.
I'm using goldcard tool v0.0.5, it only has mmc1 and mmc0
I took it from this website- android.monaco.com/content/software/308798/pc-application-goldcardtool/
And yea, I was on HTC Sync mode, not disk drive.
I'm tried this method for downgrading - igyaan.in/2011/01/how-to-root-desire-hd-included-downgrade-from-1-72-405-3-to-1-32
After that didn't work, I tried this - androidadvices.com/how-to-downgrade-htc-desire-hd-to-1-32-405-6-ota-firmware/
ok, so, i found goldcard helper from someone who uploaded it on a forum.
(can't get it from market, because market wont open, .., one of the reasons why i want to root).
i used mmc2, reversed it, and got the img.
but still, same message!!!
is there something im doing wrong?
by letting android put stuff on the card, does it lose its 'goldcard' powers?
honestly...why is this happening
please help!!!
Use my downgrade guide, it works, it is the original. It is a sticky in the DHD android dev subforum.
ummm, and wheres the link?
oh, and could you explain whats S-OFF and Radio-OFF i've beens seeing it everywhere when it comes to rooting.
is it a must, and what exactly does it do?
yay!!, it worked!!
what i did wrong was,,, on the goldcard helper, i pessed 'menu' and 'copy', and although it said reversed CID copied, it copied the mmc1 CID, not the MMC2
so i jotted down the MMC2 and got an img, and it worked!
thanks for your help!!!
but can u still answer my question above?, the s-off and radio off?
CodeNameUnknown1 said:
but can u still answer my question above?, the s-off and radio off?
Click to expand...
Click to collapse
He did in the past
http://forum.xda-developers.com/showpost.php?p=11830409&postcount=4
http://forum.xda-developers.com/showpost.php?p=11854601&postcount=2
Same problems
CodeNameUnknown1 said:
ok, so, i found goldcard helper from someone who uploaded it on a forum.
(can't get it from market, because market wont open, .., one of the reasons why i want to root).
i used mmc2, reversed it, and got the img.
but still, same message!!!
is there something im doing wrong?
by letting android put stuff on the card, does it lose its 'goldcard' powers?
honestly...why is this happening
please help!!!
Click to expand...
Click to collapse
Hi, I have the same problems! The smartphone tell me CID incorrect! I try to create the goldcard with the tools, and with hex editor! But..does't function!
Please help me!
Thanks
did you replace the exact lines with hex editor? from offset (line) 00000000 to offset (line) 00000170 including the 00000170 line?
Later Edit: and i recommend this guide http://driphter.com/index.php?topic=3867.0 ...it's quite easy to follow
Hi all,
First of all I have an Asian version Generic HTC Desire Z (Asian version but not under a provider) with the following software information:
Android version 2.2.1
Baseband: 12.28e.60.140fU_26.04.02.17_M2
Kernel: 2.6.32.21-g6e170e7....
Build: 1.82.707.1 CL317545 release-keys
Software: 1.82.707.1
My CID is HTC_044
From what I read, in order to root, we have to downgrade the software version to 1.34..... , right?
SO thats what I did.
I have followed the steps to downgrade in ( http://forum.xda-developers.com/showthread.php?t=905261 )
and creating a goldcard ( http://forum.xda-developers.com/showthread.php?t=832503 )
I tried both (2 different attempts) the PC10IMG.zip file and exe/RUU file, and have copied the whole zip file onto the SDCard (not in any folder), without extracting the files.
When I get to step 9-10 (phone in bootloader mode), I receive an error message like user "waqypaqy" got.
When I reboot into the bootloader, the phone scans the SD card, then I get this:
SD Checking...
Loading...[PC10DIAG.nbh]
No image or wrong image!
Loading...[PC10IMG.zip]
No Image!
Then after a few minutes, comes to another screen and says:
"CID incorrect! Update Fail! Press <POWER> to reboot."
From the bootscreen, here's the info:
VISION PVT SHIP S-ON
HBOOT -0.85.0009
RADIO-26.04.02.17_M2
eMMC-boot
CID Incorrect!
Update Fail!
Press <POWER> to reboot
Does anyone know what's wrong with this?
It'd be great if anyone could help me.
THANKS in advance =)
PS: I can't post under the "Development" forum because I'm still a newbie and doesn't have enough postcount yet.
The goldcard bypasses the CID check, so you can try looking at that first. Can you confirm that you've correctly written the image from the PSAS site to your sdcard?
theSpam said:
The goldcard bypasses the CID check, so you can try looking at that first. Can you confirm that you've correctly written the image from the PSAS site to your sdcard?
Click to expand...
Click to collapse
Hey theSpam,
I have tried creating the goldcard before, and have received the goldcard image through the email and have updated img through HxD editor (as per the instructions). But like what I said before, it gave me that CID incorrect message.
I'm sorry this might be a stupid question, but how do I check whether I've written the image from the PSAS site? What is the PSAS site?
Thank You for your help =)
I was just asking you to doublecheck that you've correctly written goldcard.img to your sdcard. Most people have issues during this step of the goldcard creation process.
Just open up your sdcard in HxD and see if it's there
Are you using the Asian RUU to get the PC10IMG.zip file? I found this made a difference.
theSpam said:
I was just asking you to doublecheck that you've correctly written goldcard.img to your sdcard. Most people have issues during this step of the goldcard creation process.
Just open up your sdcard in HxD and see if it's there
Click to expand...
Click to collapse
haha!
Oh yeah, I have followed all of the instructions in http://forum.xda-developers.com/showthread.php?t=832503 for part 1.
I have copied the contents of goldcard.img into the removable disk image and saved the file.
Then I went back to http://forum.xda-developers.com/showthread.php?t=905261, and followed the steps in that guide.
I only managed to get upto step 10.
Then it showed the error I mentioned above.
The RUU exe file I got was from here:
http://www.shipped-roms.com/shipped/Vision/
I downloaded the file with this name "RUU_Vision_HTC_WWE_1.34.405.5_Radio_12.28b.60.140e_26.03.02.26_M_release_155556_signed.exe"
This is the asian version, right?
I got the rom.zip file by following Part 2 steps in the link above.
Kangburra said:
Are you using the Asian RUU to get the PC10IMG.zip file? I found this made a difference.
Click to expand...
Click to collapse
Yeah, I think I did.
The RUU exe file I got was from here --> See the above post for the link
I downloaded the file with this name "RUU_Vision_HTC_WWE_1.34.405.5_Radio_12.28b.60.140e_26.03.02.26_M_release_155556_signed.exe" -- 290 MB
I got the rom.zip file by following Part 2 steps in the link above.
Do you know what I'm doing wrong?
That's WWE version, you need RUU_Vision_hTC_Asia_HK_CHT_1.34.708.3_Radio_12.28b .60.140e_26.03.02.18_M2_release_154602_signed.exe
Kangburra said:
That's WWE version, you need RUU_Vision_hTC_Asia_HK_CHT_1.34.708.3_Radio_12.28b .60.140e_26.03.02.18_M2_release_154602_signed.exe
Click to expand...
Click to collapse
By using this one, it wont turn the language into chinese right?
=) =)
I was told by someone that it would, thats why I didn't try this one..hihi
Oh, and will the steps I have to follow change because of this different filename?
I would also recommend going back and double-checking all those steps for creating the goldcard, because it sounds like it's not recognising a goldcard.
steviewevie said:
I would also recommend going back and double-checking all those steps for creating the goldcard, because it sounds like it's not recognising a goldcard.
Click to expand...
Click to collapse
Hi steviewevie,
I just want to make sure whether i've followed the steps correctly or not.
Making the goldcard:
During step 4, "Enter 'adb shell cat /sys/class/mmc_host/mmc2/mmc2:*/cid' and press enter. You should get a very long number copy it."
This is the number that I get: 479a002f86c320087483035535443530
Step 5 "Visit this page, paste in your number and reverse it."
When I opened the link for that step, there isn't any textfield where I can paste in my number.
So what I did was reverse the number manually into 035344535530384780023c68f200a974
Step 6. I entered the reversed number into the SD Card Serial (CID) text field.
Question: Can I reverse it manually?
Thank you mate (and to anyone who is kind enough to help) =)
akhoman said:
Hi steviewevie,
I just want to make sure whether i've followed the steps correctly or not.
Making the goldcard:
During step 4, "Enter 'adb shell cat /sys/class/mmc_host/mmc2/mmc2:*/cid' and press enter. You should get a very long number copy it."
This is the number that I get: 479a002f86c320087483035535443530
Step 5 "Visit this page, paste in your number and reverse it."
When I opened the link for that step, there isn't any textfield where I can paste in my number.
So what I did was reverse the number manually into 035344535530384780023c68f200a974
Step 6. I entered the reversed number into the SD Card Serial (CID) text field.
Question: Can I reverse it manually?
Thank you mate (and to anyone who is kind enough to help) =)
Click to expand...
Click to collapse
Check this out: http://forum.xda-developers.com/showthread.php?t=1029516
It's from the DHD forum but the goldcard process is the same across most HTC Android devices.
theSpam said:
Check this out: http://forum.xda-developers.com/showthread.php?t=1029516
It's from the DHD forum but the goldcard process is the same across most HTC Android devices.
Click to expand...
Click to collapse
THANKS mate, I'll check it out
Much appreciated
theSpam said:
Check this out: http://forum.xda-developers.com/showthread.php?t=1029516
It's from the DHD forum but the goldcard process is the same across most HTC Android devices.
Click to expand...
Click to collapse
It finally worked man!!!!
Super happy now!
So, this means I have downgraded my phone, and have obtained permanent root as well???
My next question is, whats next?
I think I need to install a 'radio' right? Which version do I choose?
http://wiki.cyanogenmod.com/index.php?title=Support_Downloads#HTC_Vision
WHat do I need to do next to install cyanogen MOD ?
akhoman said:
It finally worked man!!!!
Super happy now!
So, this means I have downgraded my phone, and have obtained permanent root as well???
My next question is, whats next?
I think I need to install a 'radio' right? Which version do I choose?
http://wiki.cyanogenmod.com/index.php?title=Support_Downloads#HTC_Vision
WHat do I need to do next to install cyanogen MOD ?
Click to expand...
Click to collapse
As you have downgraded, you can follow the guide found here http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision to achieve permanent root.
Once you have ClockwordMod Recovery installed (per the above guide), you can flash Cyanogen.
As for the radio, I personally don't recommend changing anything due to the brick risk (however, many others share opposite opinions).
theSpam said:
As you have downgraded, you can follow the guide found here http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision to achieve permanent root.
Once you have ClockwordMod Recovery installed (per the above guide), you can flash Cyanogen.
As for the radio, I personally don't recommend changing anything due to the brick risk (however, many others share opposite opinions).
Click to expand...
Click to collapse
Hi,
I have just finished installing and flashing CM 7 + googleaps zip file.
But I found several problems:
1. Google Maps not installed
2. Calendar is missing
3. Stock email app somehow doesnt work
4. Numbers: I can only see several digits on the letters, they are 1 2 4 5 0
5. And most of all I just found out that HTC Sync does not work with CM =( (can't sync my contacts n calendar anymore through outlook 2010)
Would you have any ideas why this is happening?
THanks very much theSpam!
Same problem!!!
Hey akhoman, happy for you in rooting your desire z successfully! Man, can you give me all the steps you did (one by one)? I have tried so many ways and nothing helped, I also got the CID wrong, I tried to make the goldcard but still having that problem all the errors and information are exactly like yours... BIG THANK, dude!
akhoman said:
Hi,
I have just finished installing and flashing CM 7 + googleaps zip file.
But I found several problems:
1. Google Maps not installed
2. Calendar is missing
3. Stock email app somehow doesnt work
4. Numbers: I can only see several digits on the letters, they are 1 2 4 5 0
5. And most of all I just found out that HTC Sync does not work with CM =( (can't sync my contacts n calendar anymore through outlook 2010)
Would you have any ideas why this is happening?
THanks very much theSpam!
Click to expand...
Click to collapse
Need to flash gapps after you flash cm Rom
Gold card making - Need helps
1. According to this method,
http://forum.xda-developers.com/showthread.php?t=1132028
http://forum.xda-developers.com/showthread.php?t=1145035
I have searched and tried to make a gold card for my Wildfire by means of Goldcardtool. But the software couldn't detect my MMC(8GB Sandisk), I don't know why.
I already formatted my MMC to FAT32 via my notebook and already followed the instruction strictly.
2. The other way I have used that is S-OFF my wildfire by using AlphaRevX(the older version because my device has HBOOT 1.01.0002) and I have have some problem in activing the software because it tell me my KEY is "Wrong". I have repeated it again and again, and made sure that my Serial is right and the key typing is correct. If this because of the key I got form the website must use with AlphaRevX lasted version.
I have already read almost all topics about this problem and I can't figure it out.
Please help me.
Thanks everyone.
Goldcard - use a micro SD and not mmc.
Alpharevx - copy your serial into wordpad and change font just to make sure you type correct characters.
Sent from my HTC Desire using Tapatalk
I think he was referring to MMC0 or MMC1 of goldcard tool.
Ok. Your hboot is 1.01.0002 right. I think presently there is no choice for having beta key for hboot 1.01.0002 (not sure).
I didn't get you what you have done. I think you had an older version of alpharevx software which supports 1.01.0002 . Then presently you have got the beta key for hboot 1.01.0001 and used it with older software for your device with hboot 1.01.0002. If this is what you have done, then how can you expect it to work.
Now I think you have to downgrade hboot to 1.01.0001 which you are facing issue with the gold card.
Regarding goldcard, run the goldcard tool as administrator. Then try MMC1 if MMC0 fails. If still the errors are present, use a different memory card. That's all I know.
Sent from my HTC Wildfire using XDA App
Thank everyone for help.
My job is done by creating a gold card with a basic method(sth. like HEX editor) and now I can downgrade it to HB1.0xxx1 and make S-OFF.
But I gave found that I use too new CWMOD and then The ROMS cant be installed.
I will solve it later T_T.
Thank you very much. ^ ^
Hello,
sorry for my English, I am German !
I tried to downgrade my Desire Z (Vodafone Branding)
Android 2.3.3
Baseband 12.56.60.25U_26-10.04.03_M
Buildnummer 2.42.161.2
Softwarenummer 2.42.161.2
with this Guide http://forum.xda-developers.com/showthread.php?t=1178912
It works very well, but the last point doesn't work
when I go in the Bootloader, the desire z looks for updates and after 2 minutes it says :
CID incorrect! update failed!
what I have to do?
Thanks
You have a branded dz so u need to make a goldcard inorder to downgrade
Sent from my HTC Vision using XDA App
I had made a goldcard with the goldcard tool !
step by step:
installed GoldCardhelper
sent the CID number to my mail addres
the code i send to rivkills
got an mail with the goldcard.img
formatted my sd card
wrote the goldcard.img to the sd card
hm ..
WarRock :) said:
I had made a goldcard with the goldcard tool !
step by step:
installed GoldCardhelper
sent the CID number to my mail addres
the code i send to rivkills
got an mail with the goldcard.img
formatted my sd card
wrote the goldcard.img to the sd card
hm ..
Click to expand...
Click to collapse
i dont know how reliable the automated goldcard maker is but the guide i used for my DZ had me make the goldcard manually. I recommend hexeditor
have you done your goldcard with the hexeditor?
please help me.. ;(
Use the goldcard windows program to only patch the "image you get from the website" to SD card.
Reverse your CID yourself like this:
First learn your SDcards CID:
open an adb command line and type:
adb shell cat /sys/class/mmc_host/mmc2/mmc2:*/cid
it will give your sdcards non-reversed "cid"
than reverse that CID like this:
Original:
AB CD EF GH IJ
YOUR REVERSED CID:
IJ GH EF CD AB
and use that reversed CID you made to submit to the website to get the image file to your email.
Than patch that image file with a goldcard helper program.
I did this and it worked!
Thank me with the button below if yours worked too
Hi, I have the same problem with same Desire Z firmware. Have you been able to find a solution yet?
thx
Nik
Hello
How do I do s-off and root for my desire hd?
I have tried hard but failed attempts that applied to two
Android is version 2.3.5
I was frustrated by the failure of all attempts
Is there a way I use to lift the protection device?
Thank you in advance
What have you tried?
Tried this?, http://forum.xda-developers.com/showthread.php?t=1259821
I tried, but it seems that there is something wrong
THANK YOU
msaam said:
I tried, but it seems that there is something wrong
Click to expand...
Click to collapse
Did you "read the effen manual" as you are advised multiple times to do? It really is important. Making sure you aren't running any antivirus is quite important too.
The ACE Hack Kit includes all you need to root your phone. And it does it all for you with very little user input.
I'm having the same issue, I have read the effen manual at least 10 times, tried the chat support and got no reply, then got banned.
I have followed all instructions to the letter yet my downgrade is still failing.
Any one have any ideas?
Johnspence185 said:
I'm having the same issue, I have read the effen manual at least 10 times, tried the chat support and got no reply, then got banned.
I have followed all instructions to the letter yet my downgrade is still failing.
Any one have any ideas?
Click to expand...
Click to collapse
The Hack Kit works great....and I would like to know why you were banned for....we try to help all the people that get stuck....and we actually do, so if you were banned, you probably didn´t follow the instructions...
By the way, what is the issue u are having?
Johnspence185 said:
I'm having the same issue, I have read the effen manual at least 10 times, tried the chat support and got no reply, then got banned.
I have followed all instructions to the letter yet my downgrade is still failing.
Any one have any ideas?
Click to expand...
Click to collapse
You could try to change SD card and try to run aahk on a ubuntu live CD.
msaam said:
I tried, but it seems that there is something wrong
THANK YOU
Click to expand...
Click to collapse
sent from my HTC Desire HD using xda premium
i tried using AAHK but got this error! PLEASE HELP!
[Select and press Enter]1
3.12.405.1_rooted_by_nitr00
This version of Android cannot use the hack kit at this time.
You can downgrade if you like, then rerun the hack step.
WARNING: THIS WILL WIPE DATA
[Would you like to downgrade? y/n]y
a67daa6baa7ef085307593fef6329d14 *PD98IMG/PD98IMG-GB2.zip
Flash the downgrade RUU? [y,n]y
pushing rom to sdcard - this takes time please be patient.
417 KB/s (259503624 bytes in 606.502s)
Setting up to temproot....
rm failed for /data/local/tmp/*, No such file or directory
206 KB/s (21215 bytes in 0.100s)
404 KB/s (572752 bytes in 1.381s)
234 KB/s (19240 bytes in 0.080s)
going for temproot using zergRush....
[**] Zerg rush - Android 2.2/2.3 local root
[**] (C) 2011 Revolutionary. All rights reserved.
[**] Parts of code from Gingerbreak, (C) 2010-2011 The Android Exploid Crew.
[+] Found a GingerBread ! 0x00017118
[*] Scooting ...
[*] Sending 149 zerglings ...
[*] Sending 189 zerglings ...
[-] Hellions with BLUE flames !
setting mainver lower for downgrade...
--set_version set. VERSION will be changed to: 1.31.405.6
Misc partition is "/dev/block/mmcblk0p17"
Patching and backing up misc partition...
Error opening input file.
Creating goldcard....
HTC android goldcard tool Copyright (C) 2011, Wayne D. Hoxsie Jr.
Original code by B. Kerler. Special thanks to ATTN1 and the XDA team.
Donations can be made to the Electronic Frontier Foundation:
or to B. Kerler:
/dev/block/mmcblk1: cannot open for write: Permission denied
starting downgrade...
** The phone will now reboot into HBOOT.
** It will then check the file just sent.
** If everything is okay, the phone will
** prompt you to continue by pressing
** VOLUME UP. It will reboot, flashing twice.
**** PUSH POWER WHEN THIS STEP COMPLETES ****
If downgrade is successful, you may set up the phone and try to hack it again.
Once the downgrade is successful, press a key to return to the menu......
Otherwise, cut and paste the output to the screen into a text file for evaluatio
n.... then press a key.
Press any key to continue . . .
dinidumr said:
[Select and press Enter]1
3.12.405.1_rooted_by_nitr00
This version of Android cannot use the hack kit at this time.
You can downgrade if you like, then rerun the hack step.
WARNING: THIS WILL WIPE DATA
[Would you like to downgrade? y/n]y
a67daa6baa7ef085307593fef6329d14 *PD98IMG/PD98IMG-GB2.zip
Flash the downgrade RUU? [y,n]y
Click to expand...
Click to collapse
what the last state of your phone..?, is that already success downgrade by that script..?, or what..?
becuse what i know is...the script needed running twice step process if your phone is already had gingerbread os..
1. first the script need running for downgrade it your phone to froyo version..
2. running that script again for continued processing gaining s-off if the first downgrade process is already success..
what i know is that AAHK script is already retried...
the best way you can try is using AAHK2 script by Phiber2000 from here..
but before that...you must read carefully the guide from that thread..what requirement and compatible for running that script correctly...
hope this can help..
JJeamy said:
what the last state of your phone..?, is that already success downgrade by that script..?, or what..?
becuse what i know is...the script needed running twice step process if your phone is already had gingerbread os..
1. first the script need running for downgrade it your phone to froyo version..
2. running that script again for continued processing gaining s-off if the first downgrade process is already success..
what i know is that AAHK script is already retried...
the best way you can try is using AAHK2 script by Phiber2000 from here..
but before that...you must read carefully the guide from that thread..what requirement and compatible for running that script correctly...
hope this can help..
Click to expand...
Click to collapse
it didnt downgrade the phone.! phone is works like before S-ON, android 2.3.5.!
hboot didn't update phone. when this process done it boots to hboot and it pass the blue bar and, no green bar or no red bar!
BTW when blue bar finishes, it says may be wrong image.
dinidumr said:
it didnt downgrade the phone.! phone is works like before S-ON, android 2.3.5.!
hboot didn't update phone. when this process done it boots to hboot and it pass the blue bar and, no green bar or no red bar!
BTW when blue bar finishes, it says may be wrong image.
Click to expand...
Click to collapse
it can be you're had the wrong img downgrade RUU file..or you had bad sd card..
to fix that..you must download the correct RUU file (PD98IMG-GBX.zip) for downgrade process..that are suitable with your CIDnum of your phone...
to do that..you must check it your phone CIDnum with fastboot command "fastboot getvar all" then you will see your CIDnum in the output of the command is in the line "INFO CIDNUM XXXXXXXX.."
example : if your CIDNUM is HTC__044 then the downgrade RUU file you must download is "PD98IMG-GB6.zip" file
if your RUU file for downgrade is already correct but AAHK still fail..then you can try using different sd card..
did you already try using AAHK2 script by Phiber2000 from the link that i give it to you above or still using AAHK first version..?
my bad!
JJeamy said:
it can be you're had the wrong img downgrade RUU file..or you had bad sd card..
to fix that..you must download the correct RUU file (PD98IMG-GBX.zip) for downgrade process..that are suitable with your CIDnum of your phone...
to do that..you must check it your phone CIDnum with fastboot command "fastboot getvar all" then you will see your CIDnum in the output of the command is in the line "INFO CIDNUM XXXXXXXX.."
example : if your CIDNUM is HTC__044 then the downgrade RUU file you must download is "PD98IMG-GB6.zip" file
if your RUU file for downgrade is already correct but AAHK still fail..then you can try using different sd card..
did you already try using AAHK2 script by Phiber2000 from the link that i give it to you above or still using AAHK first version..?
Click to expand...
Click to collapse
Thank you for quick reply!
btw i got the PD98IMGB9.zip. that is the file i need. KT KOREA)
but AAHK2 says to download PD98IMG-GB2.zip file. it doesn't recognize my file. i renamed my file to PD98IMG-GB2.zip, but it doen't working.!
HELP PLEASE!
dinidumr said:
Thank you for quick reply!
btw i got the PD98IMGB9.zip. that is the file i need. KT KOREA)
but AAHK2 says to download PD98IMG-GB2.zip file. it doesn't recognize my file. i renamed my file to PD98IMG-GB2.zip, but it doen't working.!
HELP PLEASE!
Click to expand...
Click to collapse
just do not rename it that file..lets try just ignore it what AAHK2 say's...firstly just remove PD98IMG-GB2.zip file from PD98IMG folder (AAHK2 sub folder) that you try already using it before..and just put it your new PD98IMG-GB9.zip to PD98IMG folder under AAHK2 script sub folder..and try running that script again..don't forget to disable your antivirus first before running AAHK2 script..
and just don't forget to using sd card brand that are mentioned from the AAHK2 thread it self..like Sandisk, ADATA, Samsung, Patriot Memory (this is important)
just let me know..can you show me screen shot while running that AAHK2 script process..
Thank youu! IT worked!
thank you for helping.!
I manually copied the zip file to SD card and i locked boot loader, then i boot it with hboot and hoot recognised PD98IMG.ZIP and it flashed automatically. then i run old AAHK(NOT AAHK2) and IT WORKED!
THANK YOU!