Develop Bugs

Reset DINC without Screen?

Hi all- I just replaced my phone with Asurion because the screen is dead. I have it rooted s-off with Virtuous 3.2 ROM and stock kernel (my sig is not up to date). I want to reset it before I return it. My problem is I cannot do it because I have no screen. I think I pushed it to S-Off in recover when I still could see a little of it using my good phone as a good guide. Not sure it worked though and don't know how to verify.
Is there a way for me to do this with my PC using ADB? I will need detailed instructions because I am not familiar with ADB or the syntax.
Thanks..........mm

How about putting the stock 2.2 PB31IMG, on your sd card, booting into fastboot. All you should have to do is wait a minute out two to let it load the file then just press volume up to have it start updating. After it's done you will have a stock unrooted 2.2.
Sent from my Liquid Metal using XDA App

g00s3y said:
How about putting the stock 2.2 PB31IMG, on your sd card, booting into fastboot. All you should have to do is wait a minute out two to let it load the file then just press volume up to have it start updating. After it's done you will have a stock unrooted 2.2.
Sent from my Liquid Metal using XDA App
Click to expand...
Click to collapse
Wouldn't I need to navigate the screen to get into fastboot and load the update.zip?
I also thought that would not change the s-off. I am not too concerned about that though because this was not a warranty replacement. Mostly want to wipe the phone.
Thanks

marcmarshall said:
Wouldn't I need to navigate the screen to get into fastboot and load the update.zip?
I also thought that would not change the s-off. I am not too concerned about that though because this was not a warranty replacement. Mostly want to wipe the phone.
Thanks
Click to expand...
Click to collapse
If you can, take the SD card out and use a micro SD adapter to put the image on the card, then boot into HBOOT. It will automatically find the image and ask you if you want to update. Select yes and you should be back to stock with S-ON.
ETA:
Oh... wait, you don't have a screen at all, even in HBOOT or recovery?

escalavee said:
If you can, take the SD card out and use a micro SD adapter to put the image on the card, then boot into HBOOT. It will automatically find the image and ask you if you want to update. Select yes and you should be back to stock with S-ON.
ETA:
Oh... wait, you don't have a screen at all, even in HBOOT or recovery?
Click to expand...
Click to collapse
Yup, no screen even in hboot. However if it loads the update.zip automatically (I don't recall this. As I recall you have to enter recovery from hboot, choose install update.zip, and then confirm.) Then all I would need is to know a couple key presses.
Best would be something in ADB on the PC so I see and confirm what happens.
Thanks

marcmarshall said:
Yup, no screen even in hboot. However if it loads the update.zip automatically (I don't recall this. As I recall you have to enter recovery from hboot, choose install update.zip, and then confirm.) Then all I would need is to know a couple key presses.
Best would be something in ADB on the PC so I see and confirm what happens.
Thanks
Click to expand...
Click to collapse
Connect the dead screen Inc to your computer and boot into recovery (hopefully you remember how to do it in the blind or you have another phone to look at what you have to press).
Google the adb commands, navigate to the phone memory and zero format the crap out of it
I went through the same thing, just an idea that could help you out.

Get yourself a giant magnet and rub it all over the phone. Stick it to the battery while it's in too, so everything gets a some magnetic wipe love.
I'm a romwhore, and I'm damn proud of it.

Lol magnets.
Just shake the phone vigorously to scramble your phone's data, render it useless.

Try one fo these:
http://forum.xda-developers.com/showthread.php?t=786436
Part 2: 2.2 stock using OTA RUU
1. Make sure you're rooted with clockworkmod recovery.
1A. If you're s-off, download http://www.fourty.net/~berzerker/sto...orever-son.zip
(NOTE: the unrevoked s-on tool does *not* support the 2.15.00.09.01 radio. If you're running that radio, download this, and flash that PB31IMG.zip in HBOOT before continuing.)
1B. Push that to your SDCard and flash it via clockworkmod recovery.
2. Download this zip file: http://www.fourty.net/~berzerker/sto....605.1_RUU.zip
3. Push PB31IMG-3.21.605.1_RUU.zip to your SDCard, renaming it to "PB31IMG.zip" (no quotes)(delete any other PB31IMG.zip you might have on there before pushing).
4. Boot into HBOOT, and it should recognize the PB31IMG.zip. Start the update and go get a drink (it might reboot once or twice, don't worry about it).
5. When that's done, reboot and you're at 2.2 stock!
That's it! These steps should bring you back to either 2.1 stock or 2.2 stock for a send-in!
Click to expand...
Click to collapse
sorry I don't have the exact key presses...

Here are the button presses you need for the PB31IMG flash way.
From phone being off
1. Hold vol - and power button
2. Wait about 2 minutes and let it load the PB31IMG file
3. Press vol + after 2 mintues
4. It should reboot kind of quickly
5. After about another 3-4 minutes (after it vibrates letting you know it rebooted) press vol + again.
6. Let it run through the rest and it should reboot again and that should bring it back to the regular stock setup screen that would come up if you just bought the phone.
These are as accurate as I can remember.

Stevez48 said:
Try one fo these:
http://forum.xda-developers.com/showthread.php?t=786436
sorry I don't have the exact key presses...
Click to expand...
Click to collapse
Push the update image to the sd card manually (take it out and use a micro sd adapter), boot up to hboot, wait about one minute, push the volume up key (that says yes you want it to find and update the inage) and it should start. Wait a good 15 minutes and press the volume up key to reboot.
I will get the link I got this from in a sec when I get on my laptop.
Sent from my rooted Droid Incredible using Tapatalk.

Thanks much everyone for all the help. You are all great, love this forum. I'll try again this weekend and "see" (not) what happens.

Help

I tried rooting my evo and can't get past the boot screen. Is my phone ****ed or can it be saved.
sent from my nootered nook

ruiza997 said:
I tried rooting my evo and can't get past the boot screen. Is my phone ****ed or can it be saved.
sent from my nootered nook
Click to expand...
Click to collapse
What method did you use. What is your phone software and hardware setup?
Sent from my PC36100 using XDA App

this is the method that i used [ROOT] ~~~ HTC EVO - Universal Auto Root ~~~ v2.2 (works with all version)(2/1/11). im sure i did something wrong do not want to make it seem like i am placing the blame on the dev that wrote this. as for the other info well lets just say im an ass cus i didnt write it down like it was recomended. if it helps any i bought it a month ago max 2 months not shure it that helps.

Can you Boot into Recovery? (Hold Power+Volume Down when phone is off)
Did you create a Nandroid backup?

yes i did trying it now thank you for the help

after i boot into recovery what is next

go down to where it says recovery using the down volume button and click on with the the power button. Hopefully this will take you into recovery mode. If it does take you into recovery mode go down to where it says wipe cache partition and click on it and select wipe. Then go to where it says advanced and click on it. Then click on dalvik cache and click on the then select wipe. If you can do this they you can try to reboot your phone. If not. Let me know.
If you didn't do a backup and you can get into recovery you can do a data factory reset. Its on the green recovery menu.
If you cant get into any of that and you get stuck on a red triangle try holding the power button and the volume up and you should see a menu with a factory reset. click on that and it should wipe your phone.

i tried the first step and it did not take me to recovery mode and of course i did not do a back up cus im a dumb ass. I did manage to get to the screen with the red triangle and did a factory rest. ok another stupid question do i reboot the system or select apply sdcard update zip.

if you did a factory data reset just reboot. Hopefully this will get you back.

It might take a few extra minutes to start up so give it a few extra minutes.

on the white htc evo screen

has it been more that 5 minutes.

still on the evo screen sorry about the delay was talking to my wife, she doesnt know i screwed up my phone had to keep her occupied

Ok give me a minute. Were having storms here so my internet is slow. First you will need a SD card for your phone. Clean it out except for one file you will need to download.
You need to download pc36ing. Zip for 3. 70. 651. 1 just search the form and you can get it for free.
Sent from my PC36100 using XDA App

got the card and the file extracting it to the new sd card as i type this

ok dont extract the file. Just put the whole zip file on the sd card. Once you do this turn off the phone. Pull the battery if you have to. Then start the phone by holding the power button down and the down volume button. This should that us to the boot loader. One click down you should see the HBOOT usb at the bottom. Click down to go there. Once there click the power button then select fastboot, then bootloader. If everything went well you should be ask to flash something. Then select your file on the sd card.

i see what happened. this is why i dont use auto scripts. if one command fails, there is no possible way to find out which. just unroot using an ruu or a pc36img.zip and then do zikronix's there will be root tutorial. i'll link it in my sig soon.

doesnt appear to be reading the file says no image. to be honest not sure if i am doing this right. did you want me to use two different sd cards.

make sure it's named pc36img.zip exactly. and is on the root of ur sdcard (not in any folders). i have the method linked in my sig now btw.

dkdude36 said:
i see what happened. this is why i dont use auto scripts. if one command fails, there is no possible way to find out which. just unroot using an ruu or a pc36img.zip and then do zikronix's there will be root tutorial. i'll link it in my sig soon.
Click to expand...
Click to collapse
try to follow the above link. This might be a little easier. Don't worry your phone can see be saved. If all else fails your phone is not rooted so you can take it to Sprint and tell them that your phone is jacked and you need a warranty replacement. Last resort.

[Q] Evo Sprint can't boot in, how to install recovery?

My Evo can't boot in android, it just turn on and restart after the Evo logo appear. And when I press power + volume down button I go in hboot mode, click on recovery and after that it's freeze with a picture of a phone , an "!" in a triangle.
I wonder If I can install recovery in this case or not? and how?
I've download PC36IMG.ZIP and supersonic recovery with sdk tool, so how anyone please help me, I need to try to install another ROM to sure it's hardware problem or ROM problem.

If you give me ten minutes I will attach it for you when I get to lappy.
Edit: Tada. Boot into the bootloader, select yes to update and then reboot.

teh roxxorz said:
If you give me ten minutes I will attach it for you when I get to lappy.
Edit: Tada. Boot into the bootloader, select yes to update and then reboot.
Click to expand...
Click to collapse
thank you for your help.
but is PC36IMG.zip needed to put into the sdcard, right?
no rename, just update?
I'l try and tell you the result.
btw, one more 'thank'!

kaizvn said:
...but is PC36IMG.zip needed to put into the sdcard, right?...
Click to expand...
Click to collapse
yes, put on sdcard, allow bootloader to read and update and you are good to go as far as recovery is concerned. good luck!

agentphantom said:
yes, put on sdcard, allow bootloader to read and update and you are good to go as far as recovery is concerned. good luck!
Click to expand...
Click to collapse
excuse me agentphantom, I've install go to bootloader and run that file, but I still can not access the recovery to flash rom.
anymore suggestion?
p/s: may I know what is the pc36IMG used for?

kaizvn said:
excuse me agentphantom, I've install go to bootloader and run that file, but I still can not access the recovery to flash rom.
anymore suggestion?
p/s: may I know what is the pc36IMG used for?
Click to expand...
Click to collapse
The PC36IMG is the system file the bootloader recognizes as like a system updater. And did you select update and then to reboot, once prompted?

teh roxxorz said:
The PC36IMG is the system file the bootloader recognizes as like a system updater. And did you select update and then to reboot, once prompted?
Click to expand...
Click to collapse
sorry but I don't see the "update" to choose.
I press power + volume down button => it take me to the hboot interface.
The menu there are : fastboot - recovery - clear storage - simlock - hboot usb.
5s later it start to run the PC36IMG file with no notification and log, very fast and disappear.
So, what would I do now?

kaizvn said:
sorry but I don't see the "update" to choose.
I press power + volume down button => it take me to the hboot interface.
The menu there are : fastboot - recovery - clear storage - simlock - hboot usb.
5s later it start to run the PC36IMG file with no notification and log, very fast and disappear.
So, what would I do now?
Click to expand...
Click to collapse
Two things to double check, to be sure that that the bootloader will recognize PC36IMG. 1) the PC36IMG must be named exactly that. It has to be capital letters, and you do not want it to say PC36IMG.zip, just PC36IMG. The phone automatically recognizes and labels it as a zip file. So if you named it PC36IMG.zip, it will ultimately be named PC36IMG.zip.zip, and will not be recognized.
2) Be sure that the PC36IMG is on the root (main directory) of your SD card, and not within any folders. It won't be recognized if it is in a folder.
If you make sure of those two things, then the bootloader should scan and find the PC36IMG, and instead of seeing it searching and the green lettering pop up, then disappear, you will see it ask you if you want to update, use volume up to select yes. Hope that helps you out.
Edit: And yes, I went to download the PC36IMG attatched above in this thread, and it is indeed labeled PC36IMG.zip. Rename it to PC36IMG (just remove the .zip) That should take care of it.

Also, I never saw this confirmed in the thread, but you were previously rooted and had a custom recovery prior to this problem, correct? And you are indeed s off at the bootloader?

k2buckley said:
Two things to double check, to be sure that that the bootloader will recognize PC36IMG. 1) the PC36IMG must be named exactly that. It has to be capital letters, and you do not want it to say PC36IMG.zip, just PC36IMG. The phone automatically recognizes and labels it as a zip file. So if you named it PC36IMG.zip, it will ultimately be named PC36IMG.zip.zip, and will not be recognized.
2) Be sure that the PC36IMG is on the root (main directory) of your SD card, and not within any folders. It won't be recognized if it is in a folder.
If you make sure of those two things, then the bootloader should scan and find the PC36IMG, and instead of seeing it searching and the green lettering pop up, then disappear, you will see it ask you if you want to update, use volume up to select yes. Hope that helps you out.
Edit: And yes, I went to download the PC36IMG attatched above in this thread, and it is indeed labeled PC36IMG.zip. Rename it to PC36IMG (just remove the .zip) That should take care of it.
Click to expand...
Click to collapse
I do in correctly, download the file at #2, put in root and go to bootloader.
I see the green line run on screen but havce no confirm form Update or not.
My phone is not rooted, no recovery, can't boot into android ROM, just start and restart at EVO logo.
Help me to install recovery to flash another ROM, I hope it will wake up my phone.

Okay so it was never rooted? What did you do right before your phone stopped working?

do nothing
this is my friend's phone.
He give me to try to flash a new rom for it.
but it's not root or recovery....

Okay so it wasn't working when he gave it to you right?

kaizvn said:
do nothing
this is my friend's phone.
He give me to try to flash a new rom for it.
but it's not root or recovery....
Click to expand...
Click to collapse
If you're s on and not rooted yet, I dont think you'll just be able to flash recovery. You need to root it first, then flash recovery. You should download an RUU or a PC36IMG of a factory rom. That will get you back to stock. From there, you can run Unrevoked to root it first though (you need to be rooted to flash roms). I will attatch a link with all of the PC36IMG's (you run from bootloader) and RUU's (you run from computer). You can use either method to get the phone back to stock condition (what I recommend). You will at least be able to boot then. From there you can decide if you want to root it and flash a ROM. Read up a bit more also, it will benefit you.
http://forum.xda-developers.com/showthread.php?t=884060&highlight=hboot-0.97+ruu

k2buckley said:
If you're s on and not rooted yet, I dont think you'll just be able to flash recovery. You need to root it first, then flash recovery. You should download an RUU or a PC36IMG of a factory rom. That will get you back to stock. From there, you can run Unrevoked to root it first though (you need to be rooted to flash roms). I will attatch a link with all of the PC36IMG's (you run from bootloader) and RUU's (you run from computer). You can use either method to get the phone back to stock condition (what I recommend). You will at least be able to boot then. From there you can decide if you want to root it and flash a ROM. Read up a bit more also, it will benefit you.
http://forum.xda-developers.com/showthread.php?t=884060&highlight=hboot-0.97+ruu
Click to expand...
Click to collapse
thank you very much!
I'll try anything to wake up it, I thing it's not the Hardware problem because the phone can start but can't go in the OS. But, mine is Sprint CDMA Evo, do you have any CDMA stock ROM for me to download and flash?

kaizvn said:
thank you very much!
I'll try anything to wake up it, I thing it's not the Hardware problem because the phone can start but can't go in the OS. But, mine is Sprint CDMA Evo, do you have any CDMA stock ROM for me to download and flash?
Click to expand...
Click to collapse
It's not a hardware problem, well, most likely not. Download a PC36IMG from the link I provided for you. It's hard to say which one you need, but try this one first. http://db.tt/gqTAPS1. That is a factory, unrooted ROM for the Evo. It is the latest software, 3.70. It may or may not work for you (you may need an older one, but not sure) What you need to do is download that file, rename it exactly PC36IMG. Put it on the main directory of your SD card. Shut the phone off completely. Hold Volume down and Power simultaneously until you reach the bootloader. At this point, the bootloader should scan the sd card, find the pc36img and ask you to update. You would then press volume up to select yes. Once it starts, let it run through its course. It should take a few minutes to complete, and you will see a couple different screens. whateveer you do, dont pull the battery while it's updating, and be sure you're battery has some charge on it, so it doesnt die in the process. I hope that helps. If that update successfully completes, the phone should be exactly how it came out of the box. Factory Rom. Good luck.

k2buckley said:
It's not a hardware problem, well, most likely not. Download a PC36IMG from the link I provided for you. It's hard to say which one you need, but try this one first. http://db.tt/gqTAPS1. That is a factory, unrooted ROM for the Evo. It is the latest software, 3.70. It may or may not work for you (you may need an older one, but not sure) What you need to do is download that file, rename it exactly PC36IMG. Put it on the main directory of your SD card. Shut the phone off completely. Hold Volume down and Power simultaneously until you reach the bootloader. At this point, the bootloader should scan the sd card, find the pc36img and ask you to update. You would then press volume up to select yes. Once it starts, let it run through its course. It should take a few minutes to complete, and you will see a couple different screens. whateveer you do, dont pull the battery while it's updating, and be sure you're battery has some charge on it, so it doesnt die in the process. I hope that helps. If that update successfully completes, the phone should be exactly how it came out of the box. Factory Rom. Good luck.
Click to expand...
Click to collapse
thank you k2, I'm downloading and will flash it A.S.A.P, I'll tell you the result.

Bit off topic but not really...
My EVO was rooted running cm7 with the latest clockwork gotten from and installed from rom manager.
Ran fine for about a week. Then right after pressing send on a replied email, reboot!
Crap I thought I was gonna have to retype the whole thing again...
Nope, it turns out the email had enough time to send but the phone never did reboot.
Just got itself in a loop. White HTC logo, vibrate, white htc logo,vibrate...
Could get to boot loader but when trying to access recovery I would go back into the same loop.
Kinda gave me the impression that the recovery partition was corrupted.
I was already out so I thought "what the hell" and took it to the sprint store. The tech was looking and working on the thing for literally over an hour on my phone (took about 3 hours from when I brought it in). Then finally the tech came out and asked for me. I was positive he had finally figured out it was rooted and was gonna tell me to screw off. Well, instead he said "honestly, I can't figure out what the heck is wrong with this thing, I'm just going to replace it for you,I'll be right back".
OK so now I'm expecting a refurbed phone with my battery and ad card shoved in it. He came back with a new EVO box...
Then he handed me the new one with the 8gb (I only had a 2 in mine) card and the original battery (I have the extended one). Then he said "your card battery charger and everything else is in the box".
SCORE! Haha sometime I actually like sprint...
Moral of the story: if all else fails take it to the store.s
Sent from my PC36100 using XDA Premium App

Dang that's awesome! yeah every store I've been to has been more than happy to just throw a new phone at me haha

[Q] Did I brick my EVO?

If every time I power on my EVO and it goes to the black screen with the image of the phone and red triangle, did I brick the phone? I can get into bootload but as soon as I try to go into recovery to flash the ROM, it goes back to the black screen with the red triangle. Do I have any options?

wtr1906 said:
If every time I power on my EVO and it goes to the black screen with the image of the phone and red triangle, did I brick the phone? I can get into bootload but as soon as I try to go into recovery to flash the ROM, it goes back to the black screen with the red triangle. Do I have any options?
Click to expand...
Click to collapse
Your phone isn't bricked. That screen means you don't have a custom recovery installed. What were you doing that led up to this? Does your bootloader still show Ship S off? If it is S off, then you can just flash a PC36IMG of a custom recovery, which I'll attatch (Amon Ra V2.3). So, if you're S off, download the PC36IMG, and put it on the main directory of your sd card. If you can't currently boot into a rom, then the easiest way to put the file on the card will be to put the card in a card adapter, and put it directly into your computer, or put the card in a different phone if you have access to one, and then transfer the file. Anyways, once you get the file on the card, boot to the bootloader. It'll scan and ask to update. Say yes. Once its done, it'll ask to reboot. Say no, and then select recovery. You should now boot to Amon Ra V2.3. From there you can flash a rom and what not.

Thank you good sir! You just saved me from getting chewed out by my wife

k2buckley said:
Your phone isn't bricked. That screen means you don't have a custom recovery installed. What were you doing that led up to this? Does your bootloader still show Ship S off? If it is S off, then you can just flash a PC36IMG of a custom recovery, which I'll attatch (Amon Ra V2.3). So, if you're S off, download the PC36IMG, and put it on the main directory of your sd card. If you can't currently boot into a rom, then the easiest way to put the file on the card will be to put the card in a card adapter, and put it directly into your computer, or put the card in a different phone if you have access to one, and then transfer the file. Anyways, once you get the file on the card, boot to the bootloader. It'll scan and ask to update. Say yes. Once its done, it'll ask to reboot. Say no, and then select recovery. You should now boot to Amon Ra V2.3. From there you can flash a rom and what not.
Click to expand...
Click to collapse
Hold up, the phone says Ship S-On, I was putting the auto root program on and Im not sure what I did. But I put the attachment on the SD card and did the power + down vol button. It went thru the file and just went back to the HBOOT screen. I'm kind of lost now

wtr1906 said:
Hold up, the phone says Ship S-On, I was putting the auto root program on and Im not sure what I did. But I put the attachment on the SD card and did the power + down vol button. It went thru the file and just went back to the HBOOT screen. I'm kind of lost now
Click to expand...
Click to collapse
Well, your bootloader is S on, unfortunately that means you're not rooted, and won't be able to flash the recovery image I posted up for ya. You need to get S off before you can recovery. What root method did you use initially?
When you try to boot up into the phone, by turning it on normally, what result do you get? Does it turn on? If it does, then you need to re root. IF you can not get your phone to boot, and the only two screens you get to is the bootloader, and the black screen with the Triangle, then you're going to need to run an RUU, or what would be easier, is to run a PC36IMG of an RUU. I'll post a link for you. Download the file, and name it exactly PC36IMG, and place it on your sd card. The bootloader should detect it, if it's named correctly, and as long as it's on the main directory of your sd card (the PC36IMG needs to be named exactly that, in capital letters. Also, it must not be in any folders on your sd card, it has to be on the main directory) Once you get that to run successfully, you'll be flashed back to Stock, and you should be able to boot into the ROM. It will be stock, unrooted, just as it was when you bought the phone. From that point, you'll need to re root, in order to be able to flash a rom. Let me know if you have further questions.
Download PC3IMG of ruu here : http://db.tt/gqTAPS1
(it is the 3.70 software RUU)

k2buckley said:
Well, your bootloader is S on, unfortunately that means you're not rooted, and won't be able to flash the recovery image I posted up for ya. You need to get S off before you can recovery. What root method did you use initially?
When you try to boot up into the phone, by turning it on normally, what result do you get? Does it turn on? If it does, then you need to re root. IF you can not get your phone to boot, and the only two screens you get to is the bootloader, and the black screen with the Triangle, then you're going to need to run an RUU, or what would be easier, is to run a PC36IMG of an RUU. I'll post a link for you. Download the file, and name it exactly PC36IMG, and place it on your sd card. The bootloader should detect it, if it's named correctly, and as long as it's on the main directory of your sd card (the PC36IMG needs to be named exactly that, in capital letters. Also, it must not be in any folders on your sd card, it has to be on the main directory) Once you get that to run successfully, you'll be flashed back to Stock, and you should be able to boot into the ROM. It will be stock, unrooted, just as it was when you bought the phone. From that point, you'll need to re root, in order to be able to flash a rom. Let me know if you have further questions.
Download PC3IMG of ruu here : http://db.tt/gqTAPS1
(it is the 3.70 software RUU)
Click to expand...
Click to collapse
Worked like a charm!!! I thank you again for saving me!

wtr1906 said:
Worked like a charm!!! I thank you again for saving me!
Click to expand...
Click to collapse
Great, glad it worked. And you're certainly welcome! So, now that you're flashed back to stock and unrooted, are you going to root it and flash a custom rom? Let me know if you need assistance getting root.

im having the same issue now but mine continues to go back to the black screen with the red triangle. Any advice would be greatly appreciated.
thanks dave

Davek30 said:
im having the same issue now but mine continues to go back to the black screen with the red triangle. Any advice would be greatly appreciated.
thanks dave
Click to expand...
Click to collapse
Flash the file k2buckley provided in the bootloader.

My phone has nothing like that on it.

Davek30 said:
My phone has nothing like that on it.
Click to expand...
Click to collapse
That's not the file name its someone who posted the file he is referring to above
Sent from my ADR6400L using XDA Premium App

Desire HD stuck on welcome screen after 2.3 update

Hello everyone,
im in urge need of help. I somehow failed while updating to 2.3 :/
I thought that the update was done since the loading bar went to the right and stood there for a good couple of minutes. So i took the battery out. Now as i turn the phone on i only get to see the htc sign on a white background.
I tried holding the volume down key and the power button at once. I get into the recovery menu or whatever it is called. There i've chosen factory reset: i can see a update screen again. The bar doesnt move from left to right though. After 15 sec the phone resets itself and i can see the htc logo again
Recovery only shows me a phone image with a exclamation mark
I never installed anything custom on the phone. It is as i bought it from the shop. I initially had 2.2 on it.
Anyone help please

I will guess you need to put a ROM file on your SD card and select install file from sd card in recovery. If something went wrong during update you proberly dont have a Android system installed right now.
But if your on stock rom I'm not sure if that will be possibl, but hopefully somebody with more knowledge could answear that...
Good luck

If you pulled the battery while it was updating something like the radio, then you have messed it up.
I'd suggest downloading the Gingerbread RUU and trying it again. Sadly you may now lose all the data on you phone.

andyharney said:
If you pulled the battery while it was updating something like the radio, then you have messed it up.
I'd suggest downloading the Gingerbread RUU and trying it again. Sadly you may now lose all the data on you phone.
Click to expand...
Click to collapse
screw the data !
I just want my phone back
If anyone could hit me up with the details how Im supposed to bring back my desire hd to live id be forever grateful!!!

Click the link in my sig, head to RUUs and download the Gingerbread RUU. Once downloaded, plug you handset into your computer, run the RUU~.exe .
If that fails to work, with the RUU~.exe still running open a search window on your computer and search for "rom.zip", I will be in a hidden temp folder somewhere in your userdata.
Rename this rom.zip to "PD98IMG.zip" and copy to your SDcard. Now turn off your phone, and power on while holding volume down. The bootloader should see the PD98IMG.zip and flash it for you.

garman76 said:
I will guess you need to put a ROM file on your SD card and select install file from sd card in recovery. If something went wrong during update you proberly dont have a Android system installed right now.
But if your on stock rom I'm not sure if that will be possibl, but hopefully somebody with more knowledge could answear that...
Good luck
Click to expand...
Click to collapse
dont think that this is possible, as he never had a custom revovery à la ClockworkMod installed. So he cant choose which zip to flash.
but i think that andyharney got the solution for this

andyharney said:
Click the link in my sig, head to RUUs and download the Gingerbread RUU. Once downloaded, plug you handset into your computer, run the RUU~.exe .
If that fails to work, with the RUU~.exe still running open a search window on your computer and search for "rom.zip", I will be in a hidden temp folder somewhere in your userdata.
Rename this rom.zip to "PD98IMG.zip" and copy to your SDcard. Now turn off your phone, and power on while holding volume down. The bootloader should see the PD98IMG.zip and flash it for you.
Click to expand...
Click to collapse
Damn! I can't find the option to make a e-blowjob but rest assured that if such an option would be there, you'd be the first one to receive it
Thanks a lot! It works. I had my doubts as during the whole instalation my phone showed the htc logo on the white background several times(i thought that it got worse), but in the end i got it back runing!
So happy! Thanks 1.000.000 times and once again: THANKS!

Which method worked the RUU~.exe or the PD98IMG.zip?