Just wondering if anyone else is having the same problem with CM7 and LauncherPro.
After rebooting, LauncherPro will hang for about 5-10 minutes before Android will force close it, or if I long-press the back key to manually force close it. It's only slightly annoying, since it functions properly afterwards, it would just be nice if there is a workaround or fix available so that I wouldn't have to do that after my daily reboot.
Sometimes it just happens, you may want to check you minimum frequency of your governor.
Min: 245
Max: 998
Governor: Conservative
You can try smartass...and what kernel are you using?
Yeah I am having the same problem. LP always forcecloses when I restart on RC4. Its not to annoying though.
Sent from my PC36100 using XDA App
Been happening to me since at least RC2, using stock kernel, minimum frequency of 384.
I'm pinging the devs to see if they know anything about it...
teh roxxorz said:
You can try smartass...and what kernel are you using?
Click to expand...
Click to collapse
Latest SavagedZen.
Conservative gives me the best battery life without sacrificing performance. From what I've read about smartass, I wouldn't like it.
Try setting memory usage to "high" in LP settings.
Menu>Preferences>Advanced Settings>Memory Usage Settings>Memory Usage preset>Select High.
Word from on high: We need some logcats. When I get home from work, I'm going to be flashing N35, no GApps, install LP, reboot, and then grab the log.
Hopefully that'll light some fires under people's arses. ;D
I have this issue as well.
Just chiming in that I too have this issue, also from about RC2.
Have used stock and Tiamat kernels, both exhibit the same behavior descibed in the OP.
I flashed Tiamat but the problem still exists, so I'm going to say it's either LP or CM7. Testing out the memory boost for LP now.
I have had this same problem with both my old Hero and now the Evo. LP Pro always hangs 1-2 min at bootup. Alternating between conservative, ondemand, smartass does nothing. I used CM6 on Hero, CM7 & Destroyer on the Evo.
Does not hang when I use SprintLovers.
jedijackie said:
I have had this same problem with both my old Hero and now the Evo. LP Pro always hangs 1-2 min at bootup. Alternating between conservative, ondemand, smartass does nothing. I used CM6 on Hero, CM7 & Destroyer on the Evo.
Does not hang when I use SprintLovers.
Click to expand...
Click to collapse
Yeah didn't hang when I had Sprint Lovers or Myn's Warm. Def points toward CM7 for me.
Sunsparc said:
Yeah didn't hang when I had Sprint Lovers or Myn's Warm. Def points toward CM7 for me.
Click to expand...
Click to collapse
Done think its cm7 either. I've had the issue on a few nightlies but set min CPU to 384 and fix permissions in rom manager and its gone away. Wifeys never complained about it on hers and she complains about everything
nate.spangler said:
Done think its cm7 either. I've had the issue on a few nightlies but set min CPU to 384 and fix permissions in rom manager and its gone away. Wifeys never complained about it on hers and she complains about everything
Click to expand...
Click to collapse
I'll try that out. The thing is, shouldn't the phone be running at full blast on boot? What would the min freq have to do with that?
Sunsparc said:
I'll try that out. The thing is, shouldn't the phone be running at full blast on boot? What would the min freq have to do with that?
Click to expand...
Click to collapse
If you have the "set on boot" option checked, then its running at whatever is set.
I unchecked "set on boot" and moved the min freq up to 384, no dice still hangs.
Well you'd have to re-check it after its reset. Are you using a custom kernel?
teh roxxorz said:
Well you'd have to re-check it after its reset. Are you using a custom kernel?
Click to expand...
Click to collapse
Ive used both SavagedZen and Tiamat. Using Tiamat at the moment.
Related
I have a rooted myTouch 3g slide and am using the CyanogenMod 6.1.1 ROM. I have been trying to overclock the CPU using setCPU but for some reason every time I change the max speed past 600 mhz the phone just reboots. Am I doing something wrong or do I just have a phone that can't be overclocked beyond that speed?
Thanks for any insight into this problem!
I don't know how far past 600 MHz you're trying to go, but I have been successful at overclocking to 806 MHz. Anything over that, and I start getting lockups, reboots, etc.
Hope that helps a bit!
Lol i'm jealous now.. At this point I'd like to even just be able to overclock it to 768 or 787 mhz. Anything over 600 mhz really would be a step in the right direction.
It seems as though as soon as i change the max cpu speed in setCPU the phone hangs up for a second and then immediately reboots. I have to quickly change it when i get back into setCPU after the reboot otherwise it reboots again.
Do I not have the necessary tools or applications on the phone to do this? I thought CM 6.1.1 had the overclock kernel and everything...
arjuna_ said:
Lol i'm jealous now.. At this point I'd like to even just be able to overclock it to 768 or 787 mhz. Anything over 600 mhz really would be a step in the right direction.
It seems as though as soon as i change the max cpu speed in setCPU the phone hangs up for a second and then immediately reboots. I have to quickly change it when i get back into setCPU after the reboot otherwise it reboots again.
Do I not have the necessary tools or applications on the phone to do this? I thought CM 6.1.1 had the overclock kernel and everything...
Click to expand...
Click to collapse
it does, but the problem is that your phone's cpu is not able to handle it. Some people can do 900+(unfortunately im not that lucky) some cant touch 800 even. Even though we all have the same phone they all arent exactly the same. Like on a computer some can OC higher than others even if setup is the same...
So what your saying is that my phone just can't be overclocked beyond 600 mhz? Is there a way to manually adjust it to like 650 mhz or something else that I set? Or is that dangerous and stupid to do?
Sorry i'm a total noob at this...
arjuna_ said:
So what your saying is that my phone just can't be overclocked beyond 600 mhz? Is there a way to manually adjust it to like 650 mhz or something else that I set? Or is that dangerous and stupid to do?
Sorry i'm a total noob at this...
Click to expand...
Click to collapse
That can't be done because the cpu won't actually clock to anything in between certain multiples, I forget what the multiple is but it can't do in between unfortunately. I have stably clocked to 844 mhz. Every once and awhile, normally less than once a month it will freeze but not enough for me to go down to 825 or 806.
But to me, this doesn't sound like the processor not being able to handle it. It sounds like something software related, since at least in my experience, if the CPU can't handle it, the phone simply freezes and you have to pull the battery. It doesn't reboot, it just freezes, stops processing entirely.
If you don't have the android sdk, download it and install it (just google it), and then open a command prompt when your phone is plugged in and type adb logcat and press enter.
You also need the HTC sync drivers which can be obtained from HTC's site.
Then, while running the logcat, change your frequency up one step, and after your phone is back at the boot splash screen, press CTRL + C in the command prompt window and paste the entire logcat into a reply here in this thread
Code:
with code brackets like this
. You might even do a paste2: http://paste2.org/new-paste to make it easier to read
It sure sounds like it's a system crash, not a processor locking up from too high of speeds.
Maybe its the version of SetCPU that your using. Try re-installing it first, and if that doesn't help, Google up SetCPU 2.02 or something and see if that works.
I think the latest version of setcpu is 2.10
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
What rom are you using?
Maybe the kernel is not Over Clocked.
I've made it to overclock up to 844 pretty well on 3rdSense Rom...
Tzatlacael said:
What rom are you using?
Maybe the kernel is not Over Clocked.
I've made it to overclock up to 844 pretty well on 3rdSense Rom...
Click to expand...
Click to collapse
arjuna_ said:
I have a rooted myTouch 3g slide and am using the CyanogenMod 6.1.1 ROM. I have been trying to overclock the CPU using setCPU but for some reason every time I change the max speed past 600 mhz the phone just reboots. Am I doing something wrong or do I just have a phone that can't be overclocked beyond that speed?
Thanks for any insight into this problem!
Click to expand...
Click to collapse
CM 6.1.1 Should have the kernel included.
When i first started over clocking I recall being told not to use the perflock disabler on SetCpu or it would mess things up. Perhaps you are using it and should not be or vice versa? That was using DumFuq's (sp) kernels of course, I do not know if Cyanogen still uses the same overclock kernel.
Balem said:
When i first started over clocking I recall being told not to use the perflock disabler on SetCpu or it would mess things up. Perhaps you are using it and should not be or vice versa? That was using DumFuq's (sp) kernels of course, I do not know if Cyanogen still uses the same overclock kernel.
Click to expand...
Click to collapse
You only needed to use perflock on stock kernel that was used on stock rom. Dumfuq's kernel lets you yse setcpu w/o that setting being needed. but once i got soff it would save settings even after rebooting.
I flashed cm 6.1.2 and the wimax light flashes periodically, why? And why does the battery light turn green when the battery is Only charged to 90%?
Sent From Tapatalk.
Don't know about the battery.
But the wimax light is used for notifications in CM
The wimax light is used as your notification light in place of the normal notification light. This is beneficial because you can see if you have a message if your phone is charging.
The light turns green at 90% because the battery is basically charged at this point. HTC's own charging cycle will go to 100% then back to 90% and back to 100% etc. so they obviously think 90% is fully charged as well.
Oh.. i see.. i see. Thanks for your input guys! I appreciate it. Also, can i use set cpu with cm 6.1.2? Because whenever i overclock to 1031mhz or something higher, it keeps restarting.
Sent From Tapatalk.
You can use setcpu, but it appears that frequency is a little too high for your phone.
I wonder why it was restarting before. Its not doing it anymore.
Sent From Tapatalk.
Last question. Does anyone know of collin ph is compactible with cm 6.1.2?
Sent From Tapatalk.
Jason Black said:
Oh.. i see.. i see. Thanks for your input guys! I appreciate it. Also, can i use set cpu with cm 6.1.2? Because whenever i overclock to 1031mhz or something higher, it keeps restarting.
Sent From Tapatalk.
Click to expand...
Click to collapse
What kernel are you using? The stock kernel does not support overclocking, and is probably causing your problem. I use the snap kernel with CFS, and have my phone overclocked with setcpu to 1190 mhz on CM6.1.2
Muellersirch said:
What kernel are you using? The stock kernel does not support overclocking, and is probably causing your problem. I use the snap kernel with CFS, and have my phone overclocked with setcpu to 1190 mhz on CM6.1.2
Click to expand...
Click to collapse
The stock kernel supports overclocking just fine. Some phones are just a little picky on overclocking. When I first discovered phone overclocking I was up on 1113MHz performance while screen on, 245MHz powersave while screen off. I got pretty good battery life actually, but I change to 998MHz Conservative while screen on and it's so much better battery and I don't notice any difference.
I'll crank it up to benchmark kernels, but there really isn't much of a need for it (maybe for playing games) and it can cause these random reboots that get irritating.
Muellersirch said:
What kernel are you using? The stock kernel does not support overclocking, and is probably causing your problem. I use the snap kernel with CFS, and have my phone overclocked with setcpu to 1190 mhz on CM6.1.2
Click to expand...
Click to collapse
Im using the default kernel that came with 6.1.2.
Also, how do you check system sleep and uptime on cm 612?
Anyone trying collin ph? If so, what kernel do you have?
And to contribute. I think its an issue with the rom because i was running 1190mhz on myn just fine.
Sent From Tapatalk.
My phone is rooted and has s-off but I have a few issues. One is almost half the time when I hit the power button the screen doesn't turn on instantly but the soft buttons light up. It usually takes me hitting it 2-3 times swiftly to get my screen on. Another issue is sometimes wifi calling gets screwed up so it doesn't work and it drains my battery as a background task stuck on restarting. I really only want my phone overclocked so just have baconbits kernel. is there a newer version I should put on that fixes these issues?
legato89 said:
My phone is rooted and has s-off but I have a few issues. One is almost half the time when I hit the power button the screen doesn't turn on instantly but the soft buttons light up. It usually takes me hitting it 2-3 times swiftly to get my screen on. Another issue is sometimes wifi calling gets screwed up so it doesn't work and it drains my battery as a background task stuck on restarting. I really only want my phone overclocked so just have baconbits kernel. is there a newer version I should put on that fixes these issues?
Click to expand...
Click to collapse
Baconbits, to my knowledge, is the only OCd kernel available for the stock ROM. Your screen issue might actually be caused by underclocking though, do you have a screen off profile or a minimum set?
Sent from my T-Mobile G2 using XDA App
I just have it set to 368-1497. Should I up the minimum?
legato89 said:
I just have it set to 368-1497. Should I up the minimum?
Click to expand...
Click to collapse
Give the overclock widget a try. Its available free on the market. In the advanced setting, set your screen off profile to 245 min and 806 max. Scroll down and hit "save" before you exit settings. That will keep your phone running at stock speeds while the screen is off and should stop the wake issue you're having. When you're using the phone you'll be at the higher speeds.
I already had the widget. Did what you said but it still occurs.
legato89 said:
I already had the widget. Did what you said but it still occurs.
Click to expand...
Click to collapse
245 is *way* too low, especially if you have things running in the background ... just start raising the lower end up until it stops happening.
Sent from my T-Mobile G2 using XDA App
Setting it to stay at 800 while the screen is off seemed to fix it. Any ideas about wifi calling bugging out? It usually doesn't happen very often, I think when my phone has been on for a while without a restart.
overclock widget doesn't overclock anything.... it controls the speeds AFTER you've installed an overclock kernel. I highly suggest using flippys turbocharged 1.8ghz kernel. Just because it is capable of 1.8ghz doesn't mean that you need to run it at 1.8ghz. you can just do something like 1.1 or something in between. Give it a look.
dietotherhythm said:
overclock widget doesn't overclock anything.... it controls the speeds AFTER you've installed an overclock kernel. I highly suggest using flippys turbocharged 1.8ghz kernel. Just because it is capable of 1.8ghz doesn't mean that you need to run it at 1.8ghz. you can just do something like 1.1 or something in between. Give it a look.
Click to expand...
Click to collapse
Nobody said the OC widget overclocked anything. Did you read the OP's first post? It was suggested so as to enable a screen off profile because the OP is having a wake issue while using baconbits.
Sent from my HTC Vision using XDA App
EdKeys said:
Nobody said the OC widget overclocked anything. Did you read the OP's first post? It was suggested so as to enable a screen off profile because the OP is having a wake issue while using baconbits.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
set the off screen profile to the lowest speed 200/200mhz and 100% priority and he wont have anymore wake issues, don't know what I was reading hahaha
The screen on issue doesn't happen anymore but I'm not satisfied with my battery life. In the past something was causing my battery to drain insanely fast so I un installed a bunch of unused apps and started checking background tasks but when browsing the internet for 20 minutes on my way home I use 30% of the battery, bluetooth on.
Sent from my T-Mobile G2 using XDA App
Anyone know if it is possible to run Pershoot's kernel on the stock rom that comes with the device? Any side effects?
I don't know enough to say 100% one way or the other, but I read in a post I can't find right now that only BaconBits is made to work with the stock rom.
FWIW, I tried to flash the 1.8 GHz kernal on my stock G2 this morning, and got stuck in a boot loop.
On AndroidCentral people are saying they have improved battery life with CM7 nightlies. I'd like to try running a ROM finally. Do I need to get rid of my Baconbits kernel before proceeding? I already backed up everything with Titanium.
legato89 said:
On AndroidCentral people are saying they have improved battery life with CM7 nightlies. I'd like to try running a ROM finally. Do I need to get rid of my Baconbits kernel before proceeding? I already backed up everything with Titanium.
Click to expand...
Click to collapse
NO. The first thing you need to do is flash clockworkmod 3.0.0.5, which is totally different than ROM Manager. As of right now the latest clockworkmod available through ROM Manager is 2.5.1.3. If you haven't flashed that yet (2.5.1.3) do that first through ROM Manager. The best way to flash 3.0.0.5 is to find the .img file, place it on your sd card and run the commands from terminal emulator. After that just wipe data/factory reset, wipe davlik cache and flash the latest nightly .zip, reboot, then the latest gapps .zip. Go to the development forum and the first post in the nightly vendor vision thread has all the links you'll need.
i just flashed invisibleks .37 kernal with OMFGB (ran into some problems with CM7) and i was wondering the proper way to set up setcpu profiles with smartass (if needed at all)
Sorry. This should be in Q&A.....
Sent from my OMFGB powered hTc Incredible.
watt9493 said:
i just flashed invisibleks .37 kernal with OMFGB (ran into some problems with CM7) and i was wondering the proper way to set up setcpu profiles with smartass (if needed at all)
Click to expand...
Click to collapse
I ran OMFGB 1.1.1 for a long time before they screwed up 1.2(soooooo many errors), and really felt the need to have a lockscreen music controler(1.1.1 doesn't). I always ran 128/768, on 1.1.1 it should run perfect(I run chad's kernel though), just unlock slowly. If you want a faster unlock set it 245/768. Either one of those will get you really good battery life(128 being better obviously). If you are running 1.2, I highly recommend you set it atleast at 921(i think) or above as that just doesn't run as smooth. Also note the way smartass works, unless you want to kill battery life everytime you turn the screen on, try to set the max the lowest possible as it will sit as a frequency the phone feels it should run at without losing any speed(most of the time it's 1036 if you've overclocked). So unless you are just texting or calling, it's not bad, but any multitasking or big app using when the screen on, it'll jump way up.
I believe Chad is working on an ingenious kernel that tries to scale intelligently to what it is doing at all times so it'll save battery life not only when the screen is off, but also while the screen is on.
Can i set profiles or no? Like screen off, battery ones, and one temp one?
Sent from my OMFGB powered hTc Incredible.
watt9493 said:
Can i set profiles or no? Like screen off, battery ones, and one temp one?
Sent from my OMFGB powered hTc Incredible.
Click to expand...
Click to collapse
Oh, well, there is no point for a screen off one if you are using smartass on all your profiles. When it's not doing anything, it automatically scales down to the lowest setting possible(128 for best battery but slow unlock speeds or double clicks sometimes, 245 fixes those problems but using a fraction more battery).
I have a Normal profile(128/768), a Temp profile(245/614), just make sure if you are using GPS you manually scale it up some, my phone always ran like crap when Navigating anything less then 883, but everything, and I mean everything usually was fine at 768 on 1.1.1. If you are running 1.2 probably want to do 883 then 998 for GPS.
I reflashed stock JB kernel the other day and found my phone to be running very smoothly. But I can't stand the colours on my purply screen, so back to Trinity (latest stable release).
The problem is, I'm getting a lot of lag and jerkiness on Trinity. Google Now takes forever to load, responsiveness takes a hit, and it generally feels like that whole "Project Butter" has turned into cold chunks of margarine.
I did buy the Trinity app to change settings. Is there anything I should be doing with Trinity that would give me stock-like smoothness and performance? I have a feeling there is some default setting in Trinity that is supposed to be helpful for some users but for me it's just killing the experience.
Or alternately, would I get better results with Franco?
I had similar issues. Not flowing very well , reboots and crashes. Also even though I bought the trinity app changing the clock speeds made the phone very very unresponsive. Tried many times to install it but no luck. Swapped back to Franco / glados (tried air kernel which was nice for battery but a bit laggy)
Franco also has trinity settings you can play with
J
Sent from my Galaxy Nexus using xda app-developers app
Me personally had a better experience than Franco. But all the phone are different and some might like trinity and some might like Franco. Seems like yours like Franco more
Swyped on my Galaxy Nexus running AOKP with Trinity Kernel, overclocked to 1.4GHz
Personally I've had ridiculously good results with Trinity - with 384 GPU, not 512 (1536-384-Stable35). Absolute butter even when I have very resource heavy, multiple, tasks running - and havn't had a forced reboot, freeze or anything of the sort even once. Interactive/SIO, min 307, max 1190. Everything else on default (except screen colours/gamma which I changed to my liking).
That said, if the 384 GPU is also not working for you I suppose you can give Franco or the other kernels a try, every phone set probably responds a little differently to each kernel.
cmstlist said:
I reflashed stock JB kernel the other day and found my phone to be running very smoothly. But I can't stand the colours on my purply screen, so back to Trinity (latest stable release).
The problem is, I'm getting a lot of lag and jerkiness on Trinity. Google Now takes forever to load, responsiveness takes a hit, and it generally feels like that whole "Project Butter" has turned into cold chunks of margarine.
I did buy the Trinity app to change settings. Is there anything I should be doing with Trinity that would give me stock-like smoothness and performance? I have a feeling there is some default setting in Trinity that is supposed to be helpful for some users but for me it's just killing the experience.
Or alternately, would I get better results with Franco?
Click to expand...
Click to collapse
What trinity kernel are you using? I am on trinity 384 Alpha 56 and it is butter smooth... even get great deep sleep with it.
Sent from my Galaxy Nexus using xda app-developers app
cmstlist said:
I reflashed stock JB kernel the other day and found my phone to be running very smoothly. But I can't stand the colours on my purply screen, so back to Trinity (latest stable release).
The problem is, I'm getting a lot of lag and jerkiness on Trinity. Google Now takes forever to load, responsiveness takes a hit, and it generally feels like that whole "Project Butter" has turned into cold chunks of margarine.
I did buy the Trinity app to change settings. Is there anything I should be doing with Trinity that would give me stock-like smoothness and performance? I have a feeling there is some default setting in Trinity that is supposed to be helpful for some users but for me it's just killing the experience.
Or alternately, would I get better results with Franco?
Click to expand...
Click to collapse
try using supersu instead of superuser. also, update your busybox. a lot of people have issues with root apps obtaining su slowly with superuser on jelly bean, which leads to lag.
I have good flow with trinity kernels. No lag or unresponsivness
*Who needs a gs3 when you have a NEXUS*
simms22 said:
try using supersu instead of superuser. also, update your busybox. a lot of people have issues with root apps obtaining su slowly with superuser on jelly bean, which leads to lag.
Click to expand...
Click to collapse
Already doing both, thanks for the input.
I'm using 1344/307 and I also previously tried 1536/384. My phone seems to have some overheating issues so I don't want to crank it too hard... Just want to get close to stock performance.
I'll try interactive / sio. Are those essentially what the stock kernel uses?
Sent from my Galaxy Nexus using Tapatalk 2
cmstlist said:
Already doing both, thanks for the input.
I'm using 1344/307 and I also previously tried 1536/384. My phone seems to have some overheating issues so I don't want to crank it too hard... Just want to get close to stock performance.
I'll try interactive / sio. Are those essentially what the stock kernel uses?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
i like ondemand/deadline. overheating.. whats your cpu temperature? most think that their devices are overheating when it falls in the normal range. tkt comes with widgets(in the app drawer widget menu), put the no background cpu temp widget on your homescreen and youll also get a cpu temperature reading in your status bar. at 100C the thermal throttle will kick in to lower your cpu speed and cool down your device. the safety shutdown temperature is 110C, your cpu will automatically shut down at that point. 110C is only reachable if you turn off the thermal throttle in the tkt app and you are benching your phone at a high oc. otherwise, i wouldnt worry about overheating.
The other thing is I get lockups every day or three. Today I rebooted the phone and plugged in the charger while it was rebooting. The moment the screen went off the phone was locked up. Power button would not respond. Unplugging/plugging the charger did not light up the screen. Had to do a battery pull.
In fact this happened again a second time in a row. Is there a reason the phone is locking up immediately after boot if I have the charger in? I'm trying it again a third time with the charger out, letting the screen auto-sleep before I touch the phone. Okay apparently it has nothing to do with the charger.
EVERY time I start the phone up now, if I don't unlock the screen myself before it auto-sleeps, the phone locks up and auto-reboots again. WTF??
cmstlist said:
The other thing is I get lockups every day or three. Today I rebooted the phone and plugged in the charger while it was rebooting. The moment the screen went off the phone was locked up. Power button would not respond. Unplugging/plugging the charger did not light up the screen. Had to do a battery pull.
In fact this happened again a second time in a row. Is there a reason the phone is locking up immediately after boot if I have the charger in? I'm trying it again a third time with the charger out, letting the screen auto-sleep before I touch the phone. Okay apparently it has nothing to do with the charger.
EVERY time I start the phone up now, if I don't unlock the screen myself before it auto-sleeps, the phone locks up and auto-reboots again. WTF??
Click to expand...
Click to collapse
are you undervolting at all? which yrinity kernel are you using? did you happen to use franco kernel before using trinity? try using a different charger too, ive had similar issues with a certain charger before too, until i started using a different charger.
Despite the fact that I disabled "Set On Boot" in Trinity Kernel Toolbox, it does seem I'm still set to interactive/sio on boot. And check out the logcat I captured over USB when I was doing a reboot and it locked up:
http://pastebin.com/sSe9eFXT
In particular to trim out just the TKT lines and the last few lines before lockup:
Code:
D/TKTBootHelper( 1853): TKT: Boot Completed
D/TKTBootHelper( 1853): TKT: Set file permissions.
V/LockPatternKeyguardView( 299): Set visibility on com.android.internal.policy.
[email protected] to 8388608
V/LockPatternKeyguardView( 299): Set visibility on com.android.internal.policy.
[email protected] to 8388608
D/TKTBootHelper( 1853): Current Version: 3.0.38-04149-g1d1c555-dirt00:23:38|
D/TKTBootHelper( 1853): Previous Version: 3.0.38-04149-g1d1c555-dirt00:23:38|
D/TKTBootHelper( 1853): TKT: Versions match, let's restore settings.
E/vpnapi ( 1672): Function: Connect File: AndroidIPCSocket.cpp Line: 172 failed
to connect fd=38: Connection refused
E/vpnapi ( 1672): Function: Run File: LocaleChangeMonitor.cpp Line: 140 Invoked
Function: AndroidIPCSocket::Connect Return Code: -26476533 (0xFE6C000B) Descrip
tion: ANDROIDIPCSOCKET_ERROR_CONNECT_FAILED
So it would seem that right after TKT says "let's restore settings" it locks up, if the screen is off, when set to interactive/sio. Huh?
simms22 said:
are you undervolting at all? which yrinity kernel are you using? did you happen to use franco kernel before using trinity? try using a different charger too, ive had similar issues with a certain charger before too, until i started using a different charger.
Click to expand...
Click to collapse
See my post immediately after yours.
No undervolting at least that I know of. I tried cranking max screen off frequency up in case that was the cause, and tried going back to default CPU settings. Still does the same upon reboot.
But I can confirm that if I uninstall TKT completely and boot with Trinity Kernel, there is no screen-off lockup. Whatever settings were being restored by TKT were causing the phone to freeze if the screen was off. I'll leave it at that for now and give it another go when it's not so lovely and sunny outside.
cmstlist said:
See my post immediately after yours.
No undervolting at least that I know of. I tried cranking max screen off frequency up in case that was the cause, and tried going back to default CPU settings. Still does the same upon reboot.
But I can confirm that if I uninstall TKT completely and boot with Trinity Kernel, there is no screen-off lockup. Whatever settings were being restored by TKT were causing the phone to freeze if the screen was off. I'll leave it at that for now and give it another go when it's not so lovely and sunny outside.
Click to expand...
Click to collapse
delete the data for the tkt app(main phone settings, apps). dont use set on boot, its usually not a good idea. my screen off is set to 307. if you are overclocking, you have to disable smart reflex mpu or you will freeze and reboot if not other issues. turning off smart reflex is very important if raising the cpu speed. otherwise the device will try to automatically set the voltage too low for the cpu speed and itll cause freezes/reboots.
simms22 said:
delete the data for the tkt app(main phone settings, apps). dont use set on boot, its usually not a good idea. my screen off is set to 307. if you are overclocking, you have to disable smart reflex mpu or you will freeze and reboot if not other issues. turning off smart reflex is very important if raising the cpu speed. otherwise the device will try to automatically set the voltage too low for the cpu speed and itll cause freezes/reboots.
Click to expand...
Click to collapse
I didn't overclock and I didn't undervolt. What is smart reflex?
Set on boot was DISABLED, let me emphasize. Yet the logcat shows TKT restoring settings, followed up very soon with a lockup.
Sent from my Galaxy Nexus using Tapatalk 2
cmstlist said:
I didn't overclock and I didn't undervolt. What is smart reflex?
Set on boot was DISABLED, let me emphasize. Yet the logcat shows TKT restoring settings, followed up very soon with a lockup.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
does your rom have its own cpu settings? maybe theres something enabled in there?
---------- Post added at 04:40 PM ---------- Previous post was at 04:36 PM ----------
cmstlist said:
I didn't overclock and I didn't undervolt. What is smart reflex?
Set on boot was DISABLED, let me emphasize. Yet the logcat shows TKT restoring settings, followed up very soon with a lockup.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
smart reflex is a built into stock, it controls your voltages. the thing about it is that it doesnt know overclock or undervolting, so if you overclock or undervolt, it restores voltages for stock cpu speeds. which causes freezes if youre trying to overclock by setting the voltages too low.
simms22 said:
does your rom have its own cpu settings? maybe theres something enabled in there?
Click to expand...
Click to collapse
Stock yakju Jellybean flashed straight from Google image files, with the exception of Trinity.
Sent from my Galaxy Nexus using Tapatalk 2
cmstlist said:
Stock yakju Jellybean flashed straight from Google image files, with the exception of Trinity.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
did you try clearing the tkt data, or uninstalling it and reinstalling it? honestly, this is the first time ive seen this behavior. do you have any other cpu control apps installed?
cmstlist said:
I didn't overclock and I didn't undervolt. What is smart reflex?
Set on boot was DISABLED, let me emphasize. Yet the logcat shows TKT restoring settings, followed up very soon with a lockup.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Yes, set on boot is for critical settings only, like frequency policy and voltages.
All trivial settings are always restored as they were set.
What ROM are you on? I jumped into the middle of this page and missed it.
Side note, if it's settings being restored, clear the app data using the option in the menu.
Sent from my SGH-T999 using Tapatalk 2
simms22 said:
did you try clearing the tkt data, or uninstalling it and reinstalling it? honestly, this is the first time ive seen this behavior. do you have any other cpu control apps installed?
Click to expand...
Click to collapse
No I do not. I will try reinstalling now since I uninstalled it completely.
morfic said:
Yes, set on boot is for critical settings only, like frequency policy and voltages.
All trivial settings are always restored as they were set.
What ROM are you on? I jumped into the middle of this page and missed it.
Side note, if it's settings being restored, clear the app data using the option in the menu.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Again, pure stock flashed straight from Google, except for Trinity.