I purchased marbella GB-6205 V2.2 for my dopod900 but pairing problem is encountered.There shows ? in the icon. I'm running out of tips. ROM 1.30.230WWE. Somebody got any advice
Dont really have a tip i just wanted to see what people came up with. I am haveing the same problem with my Gsat 359. My issue is with the 8525 and Wayfinder. im on VP3gs offical wm6. Also having issues with some of the menus looking like half circules but that is more an issue with the software.
For both posts, I think that you have to be more specific, not being able to pair a device might have lots of causes, in example:
- Are you sure that your devices are indeed in pairing mode, having them to enter in pairing mode can be tricky sometimes
- Usually any device in pairing mode within range will be detected by the PDA/phone.
- Sometimes the keyboard applet appears just above the passkey request window not permitting to see it (happens sometimes with my universal), also there are at least two "common" paskeys used for bluetooth devices (this doesn't mean that some more could exist), usually "0000" and "8888".
- Are you sure that both (PDA/phone and bluetooth device) devices work? Try to pair another bluetooth device with your PDA/phone and try to pair your BT device with another PDA/phone; defective items are always a possibility.
- You might even have had success to pair your devices, the problem might be the software, see all the post that To_mT_om have generated because of problems with third parties BT GPSs, verify your software and a very practical way of being sure that everything went ok with the pairing is to install the app that usually all BT GPSs have included, normally a very simple app that displays geodesic coordinates or even raw NMEA info.
- Some PDAs/OSs might have the need to "create" another serial port for the new BT GPS in order to be accessed by the software, also see the other posts for this information.
Do you need more info?
Verify all the possibilities, perform all the test mentioned and then be very specific about the exact problem, most of the best gurus (and I'm not talking about me!) ask for a tough research of the forum's posts before asking for something that might have been already answered, I understand them when they say that it is not funny to answer to the same question (in various flavors) several times.
One last thing, it's holidays time, many people could be missing in these days.
Good luck
got mine up and runnning. My problem was software related. Downloaded software from handango and i just wasnt working right. Went to the manufacture website...wayfinder.com and the new software found my gps with no problem.
We've tended to find that simultaneously restarting the BT GPS and PDA at the same time (and often with a battery removal on the GPS) can solve issues where the GPS simply doesn't want to complete pairing.
When this fails, it's usually software related or a corrupted Bluetooth stack / registry settings on the PDA..
Worst case, hard reset the PDA..
Good luck
Andy
www.pressdigital.com.au
Press Digital Support Team
>I HOPE YOU MIGHT BE ABLE TO HELP OR GUIDE ME. > >I HAVE BEEN STRUGGLING FOR A YEAR DOING AN INTENSIVE BUT MOSTLY UNSUCCESSFUL RESEARCH TO SOLVE ONE PROBLEM: LACK OF BLUETOOTH COMPATIBILITY BETWEEN MY iMATE POCKET PC PHONE (http://www.clubimate.com/t-DETAILS_PPC.aspx) AND THE BLUETOOTH CAR KIT IN THE iDRIVE OF MY BMW 335i (2007).> >I HAVE CONTACTED BMW AND IMATE SUPPORT (BY EMAIL AND BY PHONE FROM MEXICO CITY) MANY TIMES WITHOUT SUCCESS. (AND MANY OTHER SITES)> >THE CLOSEST FIX TO MY PROBLEM WAS TO UPGRADE (http://forum.xda-developers.com/) THE iMATE POCKET PC PHONE ("HIMALAYA")2003 OPERATING SYSTEM TO WB 5 AND WB 6. I WAS SURPRISED THEY WERE FINALLY COMPATIBLE. UNFORTUNATELY THE FIX IS VERY UNSTABLE AND PRODUCED TOO MANY SERIOUS PROBLEMS IN MY DEVICE.>A FRIEND LENDED ME A IMATE JASJAR AND IT WORKED FINE WITH MY BMW. OTHER CELLULAR PHONES HAVE ALSO WORKED FINE>>ALSO INSTALLED A DOWNLOAD (http://bluetooth.i-networx.de/index_e.html) THAT SUPPOSED TO FIX IT BUT DID NOT WORKED. I FOUND THIS DOWNLOAD FROM (http://wiki.xda-developers.com/index.php?pagename=HimalayaFAQ) WHERE IT IS EXPLAINED "HIMALAYA" IS MISSING THE NECESSARY PROFILES.> >I THINK THERE SHOULD BE A POSSIBILITY OF "EXTRACTING" THE NECESSARY BLUETOOTH PROFILES-STACKS-BUNDLES TO DOWNLOAD TO MY DEVICE.> >IS THERE ANYTHING YOU CAN DO TO HELP ME?
I have problems with my Bluetooth and the paired device in the car with almost every recent ROM.
After about 10 minutes driving with a connected phone, the Bluetooth shuts down on my Diamond. When I go to Settings -> ... > Bluetooth -> Mode -> Turn on Bluetooth is unchecked. If I check it again it connects again with the phone and about 10 minutes later it's off again.
I went back to the RUU_Diamond_HTC_WWE_EastEurope_1.93.479.3_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe. It's against my feelings, believe, etc. but I want to solve it .....
I installed Advanced Configuration Tool (3.0), went to Bluetooth -> Audio gateway power save and Disabled it. I did it because I was reading about suspended devices and power save features. I thought that the loss of Bluetooth is been caused by a saving power feature.
After a soft reset, the Bluetooth stays connected.
It's a start, but I'm not happy with it ... I would like to use cooked ROM's and optimal settings in the ROM.
There are other tweaks too in Bluetooth, for example the supported bitpool, etc. Perhaps those settings cause the shutdown of a connected Bluetooth device instaed of the power save feature.
Has anyone this kind of problems too with paired Bluetooth devices?
If so, would you like to help me to find the cause?
If not, can you describe what device you use (Jabra, TomTom, car radio, etc.), which ROM, which radio and extra tweaks?
Hi
I do have the same problem. I am using my Diamond with my Opel Astra (Vauxhall) and a CD70 radio with built in handsfree (Opel UHP). It disconnects after 10 minutes and after calls. Everything else works fine. Changing rom and radios has not helped so far. If I don't close the comm manager it stays connected but disconnects after a call because the comm manager is closed with the end of the call. Is there a way to force the comm manager not to close?
Olli
olliver said:
Hi
I do have the same problem. I am using my Diamond with my Opel Astra (Vauxhall) and a CD70 radio with built in handsfree (Opel UHP). It disconnects after 10 minutes and after calls. Everything else works fine. Changing rom and radios has not helped so far. If I don't close the comm manager it stays connected but disconnects after a call because the comm manager is closed with the end of the call. Is there a way to force the comm manager not to close?
Olli
Click to expand...
Click to collapse
I have a CD70 too in a Opel Zafira.
This "comm manager" thing is interesting, but it looks to me like an Opel issue.
Can't you flash firmwares by opel?
Riel said:
Can't you flash firmwares by opel?
Click to expand...
Click to collapse
That's an option, but my Trinity (P3600) performed great with the same car. Will an upgrade solve my problems? I know one thing, it's not cheap either.
I tried it with different ROM's, but it still happens.
I tried it with different radio's, nothing changed.
Till today, I've got now the new radio (v1.05.25.BS14).
http://forum.xda-developers.com/showthread.php?t=432770
It has fixed the delays in GPS + faster GPS fix and more important fo me Bluetooth didn't stop today.
I'm sure 100% sure yet, but seems to be better.
I got something to complain too about the new radio. The radio signal is less strong than the .05 radio.
Same problem here
My Vectra is equipped with CD70.
Previously I've owned a Kaiser and the problem was solved by one of the 6.1 radios, bluetooth connection was rock solid.
Right now I have the same problem with Diamond - after every single phone connection, when I'll hangup, the phone disconnects CD70. When I'll try to reconnect manually using CD70 everything is fine.
I've noticed that the same problem exists when I'm using Nokia bluetooth headset - one call, bluetooth connection dropped...
I've tried following Diamond radios:
.05
.07
.08
.BS14
and two Raphael radios by Bepe:
1.03.25.18
1.02.25.11
Each Diamond radio behaves the same way. Each Raphael radio adds a bonus - random bluetooth connection problems.
Right now I'm back with .05, I think I'll look for the software I've seen once (can't recall the name) - it's a PDA application designed for connecting to the car bluetooth systems and it has been cerftified to work fine with CD70.
Use Jetware Mobile for htc-diamond.
jetware
That's the software I couldn't remember the name.
Anyway I gave it a shot and it gets even worse, I couldnt get the connection lasting longer then 2-3 minutes, totally unstable
Right now I got back to radio .08 - the bluetooth link is rock solid, I guess I'll just need to get used to reconnecting after each phone call
Same bluetooth system in my car, same problems as you guys.
To avoid the disconnections after calls you need to go, with 'Advanced Config' to bluetooth->Audio gateway power save, and switch it to disabled.
For me this little change solve the 'first' problem, but I have another one that I don't know how to solve: the aparently random bluetooth disconections. Sometimes BT is not disconnected in hours, sometimes in days.
I am also using Jetware Mobile, but i didn't feel any improve...
The random ones depend on the radio rom version - I was using .05 and it was rock solid.
I will try .16 with audio gateway started and with power save disabled as you advised - I thought about it earler but previously I tried to disable the power save without enabling audiogateway service
Well, we will see if it works or not.
Hi,
I also have a Vectra CD/70 combination, for 2 yrs now.
I had a HTC3300 and 2years i had not a single problem with Bluetooth connection.
Now i have a HTC Diamond Touch Pro and have the same problems you guys have.
I tried all your suggestions, radio's and so on with no good result.
The good news is .. its an Opel problem and it seems to be that a Bluetooth Firmware Upgrade is available from Opel Germany. I just contacted my dealer and next week he will Upgrade my bluetooth firmware.
I will keep you guys informed.
Hello,
had the same problem with my Opel CD70.
Using Jetware Mobile and limited the entrys who copied to the car to a max. of 5. Also disable the call lists. Now it works.
I think the Opel/Vauxhall Bluetooth Connection disabels if to many entries are copied to the car.
Hello,
any News about our Bluetooth Problem ???
I also have a CD70 from Opel and I cannot understand why my Diamond swich of Bluetooth after a while ?
Is it an Opel-Problem or does anybody now an Application which helps ?
Thanks a lot for Your help,
Stepos
Hi,
I am currently using BTrestore (http://home.casema.nl/rgschmidt/WM/Downloads/BTRestore_V_1_0_0_PPC.ARMV4.CAB). This utility checks the status of the bluetooth stack every 5 secs and (re)enables it everytime it's down. It seems that the 5 secs are short enough to keep the phone connected. It's not a real solution and unfortunately this tool is sometimes instable too, but it absolutely extends the connection time with the UHP.
Maybe bullock can tell us if the carkit upgrade solves anything...??
I also created a ticket at HTC, but they refuse to troubleshoot user specific issues. They told me they only look into issues if they get enough calls from different users and to keep an eye on the update site (they seem to be able to solve issues without knowing what the actual issue is...). So I would encourage everyone here to create a HTC ticket for this issue. I still think it is an HTC issue: a bluetooth stack should never go down without any user intervention.
Good luck!
BTrestart and Jetware Mobile doesn`t help, my Touch diamond disconnect again from Opel CD70 and swiched off Bluetooth !
Can anybody help ?
Sorry guys, the OpelDealer is still "searching" for the Bluetooth upgrade.
After several phonecalls maybe next week (1st week of Febr) it will be made available to the dealer.
Like i said ... i willl keep you informed ... still have this lousy problem !!
..does anybody use the new Rom 2.03 ? Any difference ?
I also asked my Opel-Dealer for an Update of UHP, next week I 'll get new Information....
... well guys I had my CD70 updated !! I am/was very sceptical because the only thing they did was a re-install of the Language of the Navi System with a version 2005 CD. I asked if that was all to correct my Bluetooth problem .... the (smiling) answer was YES.
I have it now for 24hrs ...... and Bluetooth is still on )
I will let you know the result after a week !!
..i can't beleave it works with a 2005-update ! Great !
My Opel-Dealer is still busy in selling 10 Opel Corsa every day (..the magic word is "Abwrackprämie") , so I'll have a date there next week...
When I bought my Vectra the dealer had also to reinstall the Language-CD, maybey it was the wrong version....
...... Sorry guys ......
This update DOES not do the magic trick !! So we have to find another solution
who has the right idea ??
I currently have a Diamond and TP2 with stock ROM's.
Diamond worked perfect with carkit untill i performed major ROM upgrade from htc.com. now it will connect and not reconnect on either device or carkit restart.
My TP2 behaves EXACTLY the same - connects and drops after either restarting. when connected it works fine - voice/dialing etc etc.
My car kit is a JVC KS-BTA200 connected to my KW-AVX810 head unit.
i've read all comments on google/xda's etc - well almost all! to no avail.
the devices are all set to visible obviously and all paired. ive read that a registry edit possibly fixes the issue but my TP2 & Diamond dont have the required reg strings. (that i can find!!)
i have the remote registry tool installed on my Desktop - so im ready to make changes!
please, if anyone can help i will very grateful!!
radak23 said:
I currently have a Diamond and TP2 with stock ROM's.
Diamond worked perfect with carkit untill i performed major ROM upgrade from htc.com. now it will connect and not reconnect on either device or carkit restart.
My TP2 behaves EXACTLY the same - connects and drops after either restarting. when connected it works fine - voice/dialing etc etc.
My car kit is a JVC KS-BTA200 connected to my KW-AVX810 head unit.
i've read all comments on google/xda's etc - well almost all! to no avail.
the devices are all set to visible obviously and all paired. ive read that a registry edit possibly fixes the issue but my TP2 & Diamond dont have the required reg strings. (that i can find!!)
i have the remote registry tool installed on my Desktop - so im ready to make changes!
please, if anyone can help i will very grateful!!
Click to expand...
Click to collapse
Hi, I am using my Touch Pro 2 with the same HU and Bluetooth adaptor as you but no such problem so far.
It used to have this problem then I try to connect using Window CE as the phone setup and choose another Connection Key instead of default 0000 to pair the phone with the HU.
ok, well i just tried connecting via searching for the device from the HU. it finds my device - i tap enter (to connect on HU) then it just jumps to a blue flashing 'connecting' then goes to a yellow 'error' straight away. if i select 'open' on the HU then it connects (connecting with a different ID - a number '6') but only untill i restart the HU.
also as a test i just tried an Xperia (just had one laying around LOL) and it does the exact same as mine!! ARRRRGHHH!
so im glad to say i believe it is not an HTC issue!
ok so i have an update - the problem is my HU will not pair correctly and it will not store a pairing. great.
another quick one - have found others are having trouble with their HU/adapters. thanks anyway everyone!
TP2 Bluetooth and voice dialing working fine ???
Have you tried to reset your carkit? I had the same problem after the rom-update with my TP1 and I put my carkit (Bury CC9060) back to factory settings. So I did the same this morning after I updated my TP2 and now it works just like a charm. Of course I don't know if your carkit has this possibility. Good luck, greetz Ton
'iznogoooog' - yes it work perfectly until you restart either device - 'ton66' - unfortunatley a reset is pretty much all i can do!!! eeeeek!
hopefully a reset will fix it! - i did unplug my b/tooth adapter then switch the unit on - then off then plug it back in.. didnt change anything.. oh well! will do complete re-set 2day!
BTW:
thanks so much for everyones help!
Got a questions. I am using the AVX-826 with build in Bluetooh. I want to know if you guys get the Signal Strength show on your Head unit is correct. on my unit pair with TP2. The Signal Strength indicator doesn't move. it always show the strength with my phone is connected to the unit and it stay that way.
The Battery Strength indicator does work and show the correct battery level.
I have exactly the same prob!
Hi,
I have a AXV800 and a BTA200.
My first device was a Artemis with WM6.0. No problem so far!
Then I changend to a Diamond with WM 6.1 and had the same problem as mentioned before. Now I tried my new TP2 and still the same problem.
And I tried the old Artemis again with a new 6.1 ROM and the same problem as on the other two phones.
Now I think it depends on the WM build. 6.0 seems to work 6.1 not!!!!!!!!!!
I did a reset on my AVX800 two times without luck!
I think I'm going to use a normal phone without Windows mobile for the next test!
Schelbi.
I have had the TP2 for a couple of weeks now and am generally very happy with it, but for some reason the Sim Access Profile is not working correctly with my Audi. I have paired the phone with the car and have enabled SAP in the phone's BT advanced settings page. Unfortunately the car will only access part of my phone book (only contacts under A to B are showing). The phone has all of my contacts on it and all of the other features of SAP seem to be working. I know that I can use JETware as an alternative but would like to know if I am doing something stupid with the phone before I go down the JETware route.
Any help would be appreciated, thanks.
I put my problem / question in this thread:
I use the TP2 in my skoda with a audi BT-SAP-Adapter this combination works, tested it before with my S/// X1.
When i pair my phone with the sap-Adapter the adapter recognizes that the TP2 can use the SAP-BT-profile and use the longer pairing PIN (when you pair a mobilephone wich has no SAP-profile the adapter use the Handsfree-profile and shows you a shorter PIN). As far, everything seems to work great.
But when my TP2 want´s than to connect with the adapter i see that the statusline shows the typical symbol for the flight mode and in the BT-menu at the BT-adapter i see the words "SIM-Access" for very short time (~ one second). Next the line “Stereo-profile” or something else (it is to fast to read) appears and half a second later the line “Handfsree” appears. The Symbol for a handsfree connection is shown at the statusline and the sign for flightmode changes back to the normal symbol for filedstrength.
what i tried as far to solve the problem:
1) i contacted the HTC-Support. They told me. that they made, at the moment, a test-row to solve specially the problems between HTC-WINMob-Handsets and car-handsfree-sets. So i got from there a software which i had to install at my phone and got a error-report. This i had to sent to HTC. No further comment from them.
2) i searched at very much forums at the car and mobilephone scene.
3) I tested the combination with different SIM-cards from different Providers and different ages.
4) I deleted my contacts at my SIM and wrote some newer one with an NOKIA Phone (this helped by some other SAP-car-FSEs)
5) I used No-Data
6) I installed the newest radio-rom.
Nothing of this brought some solution.
As i found at my recherches i´m not the only one who hast this problem with the HTC and sap-car-handsfree-set.
I thing, that this is a problem with the BT-Stack which is used at the TP2 and other HTC, is it?
Dose somebody solved this problem? Even with an other HTC with the same BT-Stack???
Has somebody any other idea to solve the problem??
Any help??
Merci
Quino666
I had no problems with SIM access on my 2010 A3 TDI -- worked flawlessly with my Tilt 2 with stock ROM. I haven't checked the car's phonebook lately, but last time I looked, everything was there.
1) With update on WM 6.5 or the first WM 6-version of the ROM?
2) Do you use a build in Handsfree solution with sap-profile or the adapter-solution?
Merci
Quino666
Hey,
I have a similiar Problem with the rSAP snap-in Adapter in my 2010 iDrive BMW. rSAP (telephony) just works great, but it only syncs the simcard's PhoneBook entries.
The BT-Monitor on my TP2 (Energy Rom WiMo 6.5.6) shows an active SAP and PBAP connection. Any ideas how I tell my TP2 to distribute the internal Exchange contacts and not the SIM-Contacts?
bye
Darky