[Q] Tried to install bonsai, now phone is bricked - Epic 4G Q&A, Help & Troubleshooting

I hope someone can help me. My Epic 4g was on EC05, RFS, and I tried to install Bonsai 4.0.0 exactly as written in the installation instructions. Now my phone is trapped in a boot loop, and it's booting into CWM 2.5.1.0 for some reason. I could have sworn I installed CWM 3.0 something.
Anyway, I installed Bonsai, and it seemed to go just fine, but then it froze on the samsung screen. Nothing would work, so I pulled the battery to reboot. And then I was trapped in the boot loop.
I did do a CWM backup before I installed bonsai, but even after restoring, I still get the boot loop.
CW keeps saying something about the sd-ext.img not found, skipping restore of sd-ext.img. and it can't find cache/log or something
I tried to odin back to the EC05 I had before, but even though it says successful, I'm still stuck in the boot loop. It just will not boot back into the main OS.
Is there anything I can do, or is my phone just hosed?
Please someone help me.

unseen wombat said:
I hope someone can help me. My Epic 4g was on EC05, RFS, and I tried to install Bonsai 4.0.0 exactly as written in the installation instructions. Now my phone is trapped in a boot loop, and it's booting into CWM 2.5.1.0 for some reason. I could have sworn I installed CWM 3.0 something.
Anyway, I installed Bonsai, and it seemed to go just fine, but then it froze on the samsung screen. Nothing would work, so I pulled the battery to reboot. And then I was trapped in the boot loop.
I did do a CWM backup before I installed bonsai, but even after restoring, I still get the boot loop.
CW keeps saying something about the sd-ext.img not found, skipping restore of sd-ext.img. and it can't find cache/log or something
I tried to odin back to the EC05 I had before, but even though it says successful, I'm still stuck in the boot loop. It just will not boot back into the main OS.
Is there anything I can do, or is my phone just hosed?
Please someone help me.
Click to expand...
Click to collapse
Try to Odin to the EB13 version prerooted with CWM 3.0.0.6 found here:
http://forum.xda-developers.com/showthread.php?t=853209
And then after the conversion to EXT4 then flash Bonsai.

Ihad this exact same issue. Had cwm 3.0 installed and somehow it got changed to 2.5. I had to odin back to stock.

sultan.of.swing said:
Ihad this exact same issue. Had cwm 3.0 installed and somehow it got changed to 2.5. I had to odin back to stock.
Click to expand...
Click to collapse
I think this is an EXT4 conversion issue. When it encounters an error it reverts to 2.5.x with RFS. So best thing is odin and reflash.
BONSAI 4 and loving it!

Thank you so much. That worked like a charm. I guess I just needed to do a full wipe instead of the no wipe version I had been using. I haven't tried bonsai again yet. I'm kinda scared. I guess though now that I have EXT4, I shouldn't have this problem anymore, right? Woulda been nice if they would've said that RFS will crash your phone on the bonsai install instructions.

unseen wombat said:
Thank you so much. That worked like a charm. I guess I just needed to do a full wipe instead of the no wipe version I had been using. I haven't tried bonsai again yet. I'm kinda scared.
Click to expand...
Click to collapse
No problem. You should have no problems with Bonsai if you have the fresh odin'd eb13 and have the clockwork mod 3.0.0.6 set up. Then follow instructions to odin ec05 modem after Bonsai install.
BONSAI 4 and loving it!

A phone is not bricked if it turns on. A bricked phone is nothing more than a paperweight. I see this word get used so much but 99% of the time the phones go into download mode and then Odin works
Sent From My Evo Killer!

musclehead84 said:
A phone is not bricked if it turns on. A bricked phone is nothing more than a paperweight. I see this word get used so much but 99% of the time the phones go into download mode and then Odin works
Sent From My Evo Killer!
Click to expand...
Click to collapse
To the user asking the question it is a brick
Until someone helps them get it working again.

The term brick means the phone can not enter download mode. Bonsai doesn't support rfs that's what your problem was. There is only one custom rom that is rfs and I won't mention it. Also make sure you go into cwm or you haven't converted to ext4 yet.
Sent from my SPH-D700 using XDA App

Yeah, I guess technically it wasn't a brick. I was flippin out though because I thought my phone was done for.
Anyway, I got brave and installed bonsai. It's working fine, but I'm not sure I like it. Like where did the clock on the statusbar go? Now I only have the date. And my accuweather clock is gone from the widgets. So is the task manager widget.
So if I wanted to go back to stock, I can just use kenny's first link to odin back? Or do I need to do something special now? Is there a way I can do it without wiping all my data again?

unseen wombat said:
Yeah, I guess technically it wasn't a brick. I was flippin out though because I thought my phone was done for.
Anyway, I got brave and installed bonsai. It's working fine, but I'm not sure I like it. Like where did the clock on the statusbar go? Now I only have the date. And my accuweather clock is gone from the widgets. So is the task manager widget.
So if I wanted to go back to stock, I can just use kenny's first link to odin back? Or do I need to do something special now? Is there a way I can do it without wiping all my data again?
Click to expand...
Click to collapse
There is a mod in the bonsaigeek.com website to put the clock back. There is also links there to point you to reinstalling stock apps and widgets. One of the places I remember that has the stock stuff is Frankenstein ROM thread in Development section. If u have trouble finding any of this I can post the links when I get home this evening.
BONSAI 4 and loving it!

And yes, you can always go back to stock with the method I posted. There are EC05 stock links in the threads as well.
BONSAI 4 and loving it!

Thanks man. I just noticed my bluetooth won't connect either. This is getting to be more trouble than I want to go through with my phone. I think I'm just gonna go back to stock. Is there a way I can do it without wiping all my data? Not that I have much now anyway, just what I've put in since last night.

i got fix and this will take you back to the basic

unseen wombat said:
Thanks man. I just noticed my bluetooth won't connect either. This is getting to be more trouble than I want to go through with my phone. I think I'm just gonna go back to stock. Is there a way I can do it without wiping all my data? Not that I have much now anyway, just what I've put in since last night.
Click to expand...
Click to collapse
Since you are rooted you can get titanium backup from the market and backup your apps and data. Then after you Odin back to stock you can download titanium again and restore it. Before you Odin back you might try a factory data reset after backing up and then check your bluetooth.
BONSAI 4 and loving it!

Try this to fix bluetooth before wiping. Might save you some time.
http://forum.xda-developers.com/showpost.php?p=12120496&postcount=1392

Mandro1d said:
fourthpost
Click to expand...
Click to collapse
Dear spamming user,
You are proving why there needs to be a post count requirement on the development forum. Please jump in a well and drown.
Love,
k0nane

k0nane said:
Dear spamming user,
You are proving why there needs to be a post limit on the development forum. Please jump in a well and drown.
Love,
k0nane
Click to expand...
Click to collapse
THANK YOU!
Makes me wish there was a way for the OP to ban someone from a thread!

Hmmmm, out of curiosity, is there any work around if the phone wont go into Download mode? scanning posts and i caught this. I have only heard of a few sincerely bricking the epic.... just curious (info for the arsenal..lol)... thx

Odin back to a previous stock and one click root to the right verision of cw mod. Cw3 for ext4 file sytem.
Sent from my SPH-D700 using XDA App

Related

[Q] Clockwork recovery problem...

Hey guys, check it out. I just figured out how to get into clockwork recovery, and assuming and going about flashing a rom just like I would on my evo, I go ahead and download a rom for the epic, flash it, and it works fine. So it loads up like normal after a flash n reboot, and it kept saying no service... so I was like... uh... weird.. so I booted back into clockwork and tried nand back to the backup I did before flashing anything, of course... but I started getting an error saying it couldn't open recovery.log and now it freezes restoring at saying "lost+found" .... so I pull the batter, and now it just automatically revolts to clockwork all the time, and trying to boot the system normally... I'm not using CWM 3+.. rather the older 2.xx ... any ideas?
It's hard to understand your writing. I think the best thing you can do is use Odin to flash back to stock and start over. You didn't say what version of android you were on but if it's dk28 did you flash the modem?
What rom did you flash? I take it you were on stock di18 before?
Flashing a rom based on one of the leaked froyo builds without also flashing a modem could cause the initial problem.
And nandroid doesn't backup or restore the kernel, so using that to restore still leaves you with the kernel of the rom you flashed before, which can cause problems across build versions.
You're best bet is to odin back to di18 and start again.
musclehead84 said:
It's hard to understand your writing. I think the best thing you can do is use Odin to flash back to stock and start over. You didn't say what version of android you were on but if it's dk28 did you flash the modem?
Click to expand...
Click to collapse
Thanks a bunch, I know I re-read my post and was like.. man I wasnt descriptive at all... LOL, but I checked out this Odin, and TBH i have NO idea what all this stuff is for the Epic, only doing it to fix the booboo I did on my g/f's phone I have the Evo so its totally different stuff almost... Anyways im back to stock, now I need to read up before screwing around again .

[Q] Issues flashing MidNIGHT ROM 4.2 zip on stock eb13

Disclaimer:
I am new at this, I have read a lot and followed a lot of tutorials. I may not use terms correctly so please forgive me.
Problem:
I am trying to flash to MidNIGHT ROM 4.2 zip from stock eb13 on my Epic.
This is my first attempt at such a thing, i was able to successfully root my device via noobnl's instructions: http://forum.xda-developers.com/showthread.php?t=770388
I am able to get rom manager installed and give it SU rights, etc. I got the full rom from the developer’s autism awareness site which is the full package. I make a backup through rom manager and reboot into CWM recovery.
I clear the data/cache 3 times and proceed to update through the zip on sd card option and point it to the midnight rom zip.
It says it is successful, i reboot and I become stuck on the samsung loading screen, I let it sit for 10min just to make sure, but no dice.
I then boot it back into recovery mode and try again multiple times which it is much faster this time but they all fail to load past the samsung load screen.
I go into the CWM recovery and attempt to load my backup, which hangs at installing cache every time.
So I am left with just booting into CWM.
I then resort do using odin to get back to eb13 and I am back where I began.
Sorry for the wall of text but I am lost and have tried to read a lot so I didn’t come on here asking random questions, but I have been working on this for a long time now and figure a forum post was due.
It wont work with CWM 2.5 and RFS. It requires CWM 3.0 and EXT4
After you ODIN back to EB13 go here:
http://forum.xda-developers.com/showthread.php?t=897612
From the midNIGHT ROM first post:
ptfdmedic said:
Instructions:
1) Make sure you are Rooted with NEW CW3.0.0.6 OneClick by Dameon
Click to expand...
Click to collapse
I see now.
I used Rom manager to update my CWM to 3.0 and thought that would work with his first bullet, but I thought wrong.
I guess I dont understand RFS and EXT4, I thought rooting was rooting and noobnl's directions were the easiest for me to follow.
Much appreciated chris5h for the fast reply.
I will test this out when I get home from work.
-sgpigeon
kennyglass123 said:
Do you know how to Odin back to stock? Follow this thread for it:
http://forum.xda-developers.com/showthread.php?t=853209
Then when you restore, only restore data under advanced restore.
If you used Mybackup root or Titanium you can restore your apps from there, otherwise you should download them again from the market.
Click to expand...
Click to collapse
This is the easiest way I have found to root your phone with CWM3 and EXT4. If you don't mind using Odin I would suggest it strongly. I used it and installed Midnight ROM v4.2 and had no problems at all.
Well that was it. Thanks a lot everyone for your help. It took me like 10minutes once I had everything downloaded, much better than the hours upon hours yesterday
I officially have midnight ROM installed and I am rocking some nice speeds on my epic! Finally nice to see just what the phone is capable of.
Glad you got it. I wish people would stop using rom manager for the epic. It doesn't flash cwm
Sent From My Evo Killer!

[Q] Problem with midNIGHT rom 5.2 RFS/Journaling on

I've tried to install midNIGHT rom 6 times now with the same result. I cannot install any apps from the market, titanium backup, or from sdcard. It will vibrate once at the beginning of install than again 2 or 3 times. My phone will then show the bootup animation and return to the homescreen. Ive odined back to stock and rerooted 4 times and wiped everything 3x each time. Each time I get the same result. Ive also tried reformatting my sd card and starting with a fresh download. Other roms work, just not this one. I dont have enough posts to reply to the midnight thread, so what should I try next to make it work?
acburnett said:
I've tried to install midNIGHT rom 6 times now with the same result. I cannot install any apps from the market, titanium backup, or from sdcard. It will vibrate once at the beginning of install than again 2 or 3 times. My phone will then show the bootup animation and return to the homescreen. Ive odined back to stock and rerooted 4 times and wiped everything 3x each time. Each time I get the same result. Ive also tried reformatting my sd card and starting with a fresh download. Other roms work, just not this one. I dont have enough posts to reply to the midnight thread, so what should I try next to make it work?
Click to expand...
Click to collapse
what rom did u have before that workd ??
i had acs with ext then flashed to rooted ec05 with rfs. had several eclair roms installed.
acburnett said:
i had acs with ext then flashed to rooted ec05 with rfs. had several eclair roms installed.
Click to expand...
Click to collapse
MAYBE YOUR flashing the wrong rom to update from the midnight ex: if you use dk28 ... i dnt think thats gets the proper update ec05
so lets see if you flash a dI18 or better get eb13 stick rom ... now u can either flash the ec05 modem or as my phone did when i used the stock eb13 it sent me the update for ec05 then i rooted w 3.0.6 clockworkmod then i went to BONSAI .. i left BONSAi to midnight ... i wiped factory data 3x - cache petition 3x and davlik cache 3x ... then i installed the zip MIDNIGHT V5.2 JOURNALING ON .... THEN AFTER IT BOOTED .... i went back into RECOVERY and flash the ZIP EXTRAS .. bang it was magic ... lol'
but basically im tryn to give you steps that maybe something might help u or give u and idea ..... IT WORKED FOR ME .....
DISCLAIMER : im not a professional if something major goes wrong i dnt not claim responsibility ...
I have the same problem. Worked the first time I installed it but I restored back to stock. Now when I install I can't install from market. Tried odin back to stock but It still doesn't work. Haven't seen a solution in the midnight thread besides going to EXT.
I am having issues as well and cannot post a reply. I have wiped and re installed 3x but my phone will randomly turn off and I have to pull the battery to reset device. If the device stays plugged in I do not have this issue. Any ideas or suggestions would be greatly appreciated!!
You note that this version is the one with journaling enabled... have you tried the version without journaling? You can manually re-enable it by making a CWM Nandroid backup and then restoring that backup immediately after.
acburnett said:
i had acs with ext then flashed to rooted ec05 with rfs. had several eclair roms installed.
Click to expand...
Click to collapse
On the instructions for midNIGHT 5.2 with Journaling On it says not to start with a pre-rooted EC05. Start with stock EC05 and then root with CWM 2.5.5 for RFS or 3.0.0.6 if you are wanting to use the EXT4 one. There is a link for a stock EC05 on the instructions in the thread for the ROM
And how to check if the journaling is actually on or off.
dito33 said:
And how to check if the journaling is actually on or off.
Click to expand...
Click to collapse
I'm not sure if there's a quick and easy way to detect this through the Terminal Emulator. I tried a line of code that I believed would tell me but I didn't get the answer I was looking for. Someone else may have the answer.
The quick and dirty way, however, is to make a Nandroid backup through Clockworkmod, as you should generally just have one at all times anyway. Now turn your phone on, and pull the battery out. If when you turn your phone back on you don't encounter any FC's, then your journaling is on and your data is protected. If not, then restore your Nandroid backup you just made and that will enable journaling.
If you installed a no-journaling rom, rest assured, journaling is off if you haven't restored. Either way you should have a Nandroid backup just in case.
Note: This process has been documented and posted many many many times across XDA at this point.
I was also having this issue so I installed the EXT4 Journal On version and problem solved. No one knows why LOL.

is it the phone?? flashing problems.

So lemme say first i can over from an HTC and love the way this baby works. i was very active in my HTC and flashed and did a lot of stuff to it, also doing a lot to my brother and sisters phones to. Evo and Captivate. my brothers evo like my HTC wasnt that bad at flashing could just download and go. I had so many problems with getting odin or one click to read my phone i was so upset cause i couldnt get to flashing. WELL now my comp is a champ and working like a charm, my phone on the other hand not so well. I once got SRF 1.0.1 to flash but it was real buggy on me, force closes, browser was screwy. Also Odin flashed SwissCheese but was slow. The reason i Odin flashed it is because no matter what rom i try and flash i get stuck on the samsung screen. even SFR 1.0.1 does it too. I have looked all over for the answer and nothing. I know what i am doing when it comes to these androids and am very good at figuring out the solution, but i am stuck. I am 100% sure i have done everything step by step per the devoloper.... just saying, anyone have a clue? think it could be my phone?
Odin back to stock. I have a video made, click the link in my signature.
Sent from my SPH-D700 using XDA App
2 things, first coming from stock EC05 is screwy to begin with and it is best to do all the wipes. It would be much better to either Odin in an EC05 or EB13 prerooted. Then when you pick a ROM is it EXT4 or RFS? If you pick an EXT4 ROM make sure you have converted to EXT4 somehow first unless the ROM says it will convert it for you. If you try to flash an EXT4 ROM on an RFS system without converting, you will get stuck at the SAMSUNG screen.
Okay well here's a little update... I have tried using 3.0.2.5 many times in the past with the same results. Stuck at samsung screen!! I have made sure to use the flashable rfstoext4 before flashing a ext4 rom, even tho SRF converts for you. I feel like a baffled idiot on this because I have done this so many times on other phones and am very quick to figure out a solution if needed... BUT I AM LOOOOOST I did see a few good suggestions I am gonna try... I am gonna odin a prerooted rom and see.
For ****s and giggles I tried to flash the ONE rom that did work for me SRF 1.0.1 and it worked! But very buggy still. Even a fresh dwnload of he rom will not work as it didn't before. Just the one file I downloaded before as its been the only one that worked. Also I tried to flash SRF 1.2 on top of it and still stuck at the samsung screen.
I am confused as to what is going on. I have tried many different things and to no prevail. I even started to think maybe it is the stock rom I am odin'in to but even flashing over the SRF I had the same outcome....
You think it could possibly be a phone problem?!?!
Sent from my SPH-D700 using Tapatalk
I flashed an EXT4 rom without converting. What can I do to fix this?
B4LLS4GN4 said:
I flashed an EXT4 rom without converting. What can I do to fix this?
Click to expand...
Click to collapse
Did you try to restore a nand backup of your last working configuration? You can install an RFS ROM like RFSplus or one of the Gingerbread leaks. Pull your sd card out and put it into a computer to download and copy an RFS ROM onto it and put it back into the phone and flash.

OMG HELP! Bootloop, download modes works, flashed with Kies and STILL bootlooping

I have the SGH-M919
I've rooted my phone and was running a GE rom
Everything was fine for MONTHS
Got in my car and plugged my AUX cable to my phone for music and the phone froze.
Force rebooted the phone and it started boot looping.
Rebooted to recovery (TWRP) and TRIED to wipe dalvik and cache and it FAILED, said it couldn't mount dalvik
Rebooted to recovery again and wiped all partitions and this time it worked so I proceeded to re-install GE rom, still bootlooping
Came home and tried to use ODIN to flash M919UVUAMDL and it failed.
Tried ODIN to flash M919UVUEMK2, also failed (sorry don't have the error messages right now)
Rebooted phone into download mode again and phone said there was an issue and to use Kies to recover
Installed Kies and started emergency recovery and that went through fine and the phone finished and STILLLLLLL BOOT LOOPS !!!!!!!!!!!
Copied the file that Kies downloaded (M919UVUFNB4) and tried ODIN again to flash that and it flashes fine but STILLL BOOT LOOPS
Obviously my Knox warranty flag is tripped and I don't have the money for the insurance right now.... so PLEASE FOR THE LOVE OF BOB does anyone have any other diagnostic tips or tricks to help me figure out why the F this phone is boot looping.
53 views and no replies.... come on people... someone HAS to have something that might help..
Anyone know if ANY possible way to reset the knox warranty void flag ?
avelis26 said:
53 views and no replies.... come on people... someone HAS to have something that might help..
Anyone know if ANY possible way to reset the knox warranty void flag ?
Click to expand...
Click to collapse
Only Samsung can reset your Knox flag. You can't expect instant responses here. People read and answer the questions they know how to. Not doing a full wipe before installing a different ROM often causes soft bricks and bootloops. I would start there although that doesn't explain why you couldn't mount Dalvik. Try a different recovery. Many people have had trouble with TWRP. Philz Touch works well if you haven't already tried it.
Sent from my SGH-M919 using xda app-developers app
I literally just had the exact same problem as you. I googled and found http://forum.xda-developers.com/showthread.php?t=2265477, then googled some more and found my .tar file for my phone, then odined back to stock 4.2.2. It took 20 min.
lalec said:
Only Samsung can reset your Knox flag. You can't expect instant responses here. People read and answer the questions they know how to. Not doing a full wipe before installing a different ROM often causes soft bricks and bootloops. I would start there although that doesn't explain why you couldn't mount Dalvik. Try a different recovery. Many people have had trouble with TWRP. Philz Touch works well if you haven't already tried it.
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
1. Samsung WON'T reset my flag... they won't even TOUCH the phone in any way shape or form. I spent almost two hours dealing with them and being honest about the situation. And they STILL won't do anything at all. The rep I was speaking too even said the first thing they do is check that flag and if its popped, they put it back in the box and send it back with no further action. So I will not buy form Samsung ever again.
2. I'm not expecting instant responses at all and nothing I said should have been interpreted at such. I made the comment of 53 views in 4 hours and not a single reply ... I was hoping for a better ratio of responses than that.
3. Where are you getting "Not doing a full wipe before installed a different ROM..." I never said that I didn't... and if you read what I took the time to organize neatly, I specifically state that full wipe was what I tried BEFORE re-installing the SAME rom.
4. Can't try a different recovery if I can't even get the stock factory image to do an initial boot.
cybervyrus8587 said:
I literally just had the exact same problem as you. I googled and found http://forum.xda-developers.com/showthread.php?t=2265477, then googled some more and found my .tar file for my phone, then odined back to stock 4.2.2. It took 20 min.
Click to expand...
Click to collapse
Which one did you flash ?
M919UVUFNB4
M919UVUEMK2
M919UVUAMDL
M919UVUAMDB
I've tried #3 but it gives me an auth failure....
Just ODIN philz on there. TWRP has given me issues on this phone off and on. Philz will let screw around in there. Your phone isn't dead, it just needs some love
TigerDNA said:
Just ODIN philz on there. TWRP has given me issues on this phone off and on. Philz will let screw around in there. Your phone isn't dead, it just needs some love
Click to expand...
Click to collapse
lol ummm ok I'm glad to hear that but how would flashing a recovery fix the fact that the factory stock image won't even work Not being a ****... I really do want to know
avelis26 said:
lol ummm ok I'm glad to hear that but how would flashing a recovery fix the fact that the factory stock image won't even work Not being a ****... I really do want to know
Click to expand...
Click to collapse
Post deleted
☞ Sent from here ☜
baseballfanz said:
Post deleted
☞ Sent from here ☜
Click to expand...
Click to collapse
Sooooo umm what ?
Anyway... I flashed PhilZ on my phone, did full wipe, tried installing the same GE rom I was using... didn't work.
Tried installing stock rom, didn't work.
Tried flashing M919UVUFNB4 via ODIN... and it flashes fine but again, first boot wont work.
Ok so .... I guess installing PhilZ... then full wipe, then flashing M919UVUFNB4 TWICE back to back did the trick.... no freaking clue how but it worked
I spoke too soon. Went through first boot. Got all the way to the end setup and then it rebooted on its own ... and now its stuck in a boot loop again
avelis26 said:
Sooooo umm what ?
Anyway... I flashed PhilZ on my phone, did full wipe, tried installing the same GE rom I was using... didn't work.
Tried installing stock rom, didn't work.
Tried flashing M919UVUFNB4 via ODIN... and it flashes fine but again, first boot wont work.
Click to expand...
Click to collapse
Since your using philz, choose install new ROM, then go to advanced and wipe dalvik, THEN go to mounts and select the one close to the bottom, wipe SD/data or something..... This will wipe your internal SD, OK so then install your rom and reboot.....
I am starting to think you flashed a non GE kernel and didnt realize it You just got to give the phone some love, thats all. It knows when your upset you know.
TigerDNA said:
Since your using philz, choose install new ROM, then go to advanced and wipe dalvik, THEN go to mounts and select the one close to the bottom, wipe SD/data or something..... This will wipe your internal SD, OK so then install your rom and reboot.....
I am starting to think you flashed a non GE kernel and didnt realize it You just got to give the phone some love, thats all. It knows when your upset you know.
Click to expand...
Click to collapse
lol
The weirdness continues
sooo it started boot looping again. Then I rebooted to recovery (which obviously after flashing NB4, its no longer PhilZ) and did factory reset. Now its working again with latest firmware.
Also I flashed the GE rom from HERE in XDA and used it for like 2 or 3 months then it suddenly stopped working so I don't think the kernal was the issue... I'm so freaking confused
avelis26 said:
lol
The weirdness continues
sooo it started boot looping again. Then I rebooted to recovery (which obviously after flashing NB4, its no longer PhilZ) and did factory reset. Now its working again with latest firmware.
Also I flashed the GE rom from HERE in XDA and used it for like 2 or 3 months then it suddenly stopped working so I don't think the kernal was the issue... I'm so freaking confused
Click to expand...
Click to collapse
Flash something else, GE is boring, Flash something crazy like Slim or something, that might work... Possibly it could be a bootloader issue, did you ever get on the MK2? Maybe you got one of the female phones. Sammy made some by mistake. they can be real finicky every now and then, like they work just fine most of the time, but about once a month or so they just crap out. Could be that too.
TigerDNA said:
Flash something else, GE is boring, Flash something crazy like Slim or something, that might work... Possibly it could be a bootloader issue, did you ever get on the MK2? Maybe you got one of the female phones. Sammy made some by mistake. they can be real finicky every now and then, like they work just fine most of the time, but about once a month or so they just crap out. Could be that too.
Click to expand...
Click to collapse
No never got MK2... went straight to NB4
And I LIKE GE lol...
Well whatever happened it seems stable again now currently on stock NB4
Next thing to check is if the knox warranty flag is still tripped... Do you know how to do that ?
Yea your Knox flag is tripped alright, you have zero chance if ever getting back to 0x0.... Nobody knows how to do that brother.
Sent from my GT-I9505G using xda app-developers app
avelis26 said:
No never got MK2... went straight to NB4
And I LIKE GE lol...
Well whatever happened it seems stable again now currently on stock NB4
Next thing to check is if the knox warranty flag is still tripped... Do you know how to do that ?
Click to expand...
Click to collapse
Just put the phone in download mode. Power off then volume up, home and power. You'll see it when you get into download mode.
TigerDNA said:
Just ODIN philz on there. TWRP has given me issues on this phone off and on. Philz will let screw around in there. Your phone isn't dead, it just needs some love
Click to expand...
Click to collapse
Philz's and TWRP both had small glitches on the GS4 4.2.2 Stock Rom.
I downloaded and installed the OUDHS-Recovery-jfltetmo-1.0.3.3.tar and have it all PERFECT now! You can search using exactly that filename and download it for your use. IT IS THE flashable Recovery Version.
I can, using Rom Manager, NAME THE BACKUP before booting into recovery, and it makes the backup just as I named it!
I can also recover using Rom Manager, and visually select what backup file I want to restore to, again, before booting into recovery!
CWM type backups take longer then TWRP backups to complete, but I have not had any instance that a backup I made couldn't be restored.
I did have that problem using "TWRP" and "On Line Backup". (No longer do I trust using those)
Hope this info helps your decision!
Good Luck and Aloha!

Categories

Resources