Related
Hi all, I have a new Bluetooth headset h680 which I have paired with the desire, its connected and when on a call the person on the other end can hear me but I cannot hear them....anyone have a similar problem?
No, but only tested Plantronics 975. which works fine.
I Have a problem with the bluetooth as well. The connection and pairing are OK but there is no sound coming out of the headset.
I've google it and it seems there is a general problem with the bluetooth audio.
I also have a bluetooth problem.
I paires with my car kit (jvc kd-r711) and after a few seconds i get a error saying "headset disconnected"
I've read similair problems since the froyo update. Anyone else have the same problems?
@johnsten
Yes, I have the same problems with my Volkswagen Golf 6 navi!
At first, the phone connects just fine. No problems at all. Made several calls, phone book is synced automatically. All fine..
But then after some time it gets bugged. When I tart my car, and the systems sais.. phone connected. My desire sais "headset connected", and after some seconds it says "headset disconnected". The Bluetooth connection remains active, but the phone is not in "headset" mode.
The only thing that really seems to fix this problem is a full system swipe, but then I lose all by programs and Angry birds savegames
I really want to get rid of this problem. Any ideas?
Grtz, Ron
similar to jah, only tested the plantronics 975, never had issues
also working well with my Jabra Extreme so far
no problems with Nokia BH-503 and SE MW600
No problem with my SE MW600 either, for 340 SEK (36€) it has everything I need: volume, back, play-pause, forward and mic
No problem with either my JVC-901 car head unit or Sony Ericcson HBH-980 stereo headset
ford focus bluetooth headset issue
Hi there, I have a problem with the desire and Bluetooth with my Ford focus.
It pairs fine, but looses connection after about 45 seconds. If you check a task manager you see the Bluetooth process at very high CPU after the disconnect, for a number if minutes.
If you make a call before the Bluetooth drops out it remains connected for the duration of the call !
Tried disabling WiFi etc, makes no difference.
Any ideas?
silvermeanie2412 said:
Hi there, I have a problem with the desire and Bluetooth with my Ford focus.
It pairs fine, but looses connection after about 45 seconds. If you check a task manager you see the Bluetooth process at very high CPU after the disconnect, for a number if minutes.
If you make a call before the Bluetooth drops out it remains connected for the duration of the call !
Tried disabling WiFi etc, makes no difference.
Any ideas?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=731626
I had just the exact problem no problems any more though after this fix I dont know if it was a bad rom flash that screwed something up for me but BT works great now
I have the same problem, bluetooth paired but can not hear anything. I tried over 10 different, but it does not help. Can anyone solve this problem?
I'm having a similar problem with my car stereo & HTC Desire bluetooth connection.
I have a Silvercrest stereo with blutooth which worked with my provious Nokia & Blackberry but cannot get it to work with my Desire (2.2 Froyo)
The 2 devices will pair but when I try to make a call or receive a call the devices disconnect.
I am not at all savvy about flashing ROM's or anything so as simple a resolution as possible please...(& no, changing my car radio is not an option )
Any info is greatly appreciated as I spend a lot of time in the car & need the hands free
Bluetooth problem
saayinla said:
Hi all, I have a new Bluetooth headset h680 which I have paired with the desire, its connected and when on a call the person on the other end can hear me but I cannot hear them....anyone have a similar problem?
Click to expand...
Click to collapse
I have a Pioneer 7100bt car radio and a Desire with Leedroid 2.2f and i does the same.
Does somebody know a solution??
I too have a H680 and like you, callers can hear me however, I can hear them but very quietly even with volume full up.
I also have a Jawbone 2 where I can hear callers but they cannot hear me very well.
The Jawbone 2 was fine with previous handsets.
No solution though, sorry.
Has anyone else paired a headset to their slide and had media audio come through it?
I paired my old jawbone2 to my slide and when I was playing a game, game audio came through the ear piece. It only happened ONCE and now everything (except calls and the genius button) is back to the phone speaker.
Is that normal? Should audio be routed through my BT Headset like that? I was pretty certain only calls should go through to a non a2dp device.
I don't know anything about the jawbone2, but I have no problems. For regular phone use, I have a Motorola H500 and I always play Pandora in the car, and have never had music come through the H500, just voice like it should be. (I've used the H500 on the G1 I ordered on launch day, on a Motorola Droid, a Sprint EVO 4G, and the 3G Slide on a variety of stock and non-stock ROMs.) I also have a Motorola S9 A2DP headset, and the audio works as you would expect on it also on all of those devices. Maybe the Slide detects the Jawbone2 in a funky way somehow. What does it say when you go to Settings->Wireless & Networks->Bluetooth Settings->Jawbone2 (press & hold then select options.) If it's not a A2DP headset, it should just say "Phone, Use for phone audio." An A2DP headset will also say "Media, use for media audio." If you are lucky, the phone is just detecting it wrong and you can uncheck the Media option.
It only did it once and then went back to acting like a normal BT headset.
I am going to chalk it up as a fluke from initial pairing.
And under options it says phone audio only which is ok.
I'm replacing it with a Jawbone Icon tomorrow which supports a2dp and a whole slew of other nifty features for a single ear headset.
Don't deal with much bluetooth headsets but i do hook it up to my car stereo and i know there are settings in the bluetooth of that specific device. have you had a chance to look in there?
Bluetooth Pairing problems
I have similar problems when pairing to my truck stereo. It auto pairs when I get into the truck and works perfectly well the first time I make a call. But after that it doesnt disconnect properly AND it will disconnect but will stay paired.
I am able to go into BT setting and have it reconnect.
Works once then bam not connected again.
I have Android version 2.3.3
Baseband 47.3201.35.06U_7.07.35.025
Kernel 2.6.32.17 -Cyanogenmod-g501281a
Mem Info
183MB /418MB
Build GRI40
Connecting to a Kenwood Receiver
DNX9140
It worked fine for my Nexus Not sure why this is happening.
Thanks
What's up everybody,
Just posting a thread because one of my best mates bought a black One X on my recommendation because it's a total powerhouse of a handset, except he's having some issues connecting it over bluetooth to his car.
He's got a lovely brand new 12 plate Vauxhall (in the UK, Opel elsewhere and i assume they all use the same software) Corsa with a built-in Bluetooth car kit. His phone connects fine, he can even dial from the steering wheel and start the call, but all audio takes place through the phone speaker. We've tried pairing, unpairing, playing around with a whole host of bluetooth settings, but call audio always takes place through the phone speaker rather than the car itself.
This was never the case with his old Nexus S, or my HD7, but our teacher's One X and another friend's One X have the same problem: no audio routes itself through the car's speakers.
Does anybody have a solution? Has anybody got a similar problem?
HTC one X
Hi, the problem is an app called "car". It takes control when ever you connect your phone to a car kit. Open the app, it has a steering wheel above it and click on the settings, where it displays the bluetooth symbol. Un-click all the auto launch and auto connect settings. That should cure it.
please help..
Hi,
Guys I am having the same issue in my one x version 4.0.3. I can't pick up calls and talk straight from my car's speakers . i have first to pick up from the from and switch the speaker to htc speaker then I have to switch the phone to my car speaker again. At this point the call is heard through the car's speakers. !! PLZ HOW CAN I FIX THIS ??
Me Too!
My car does this too, only way to get sound is go into the menu on the car and tick "Free Speech"
Hoping 4.0.4 or 4.1 fixes this!
HTC's advice was return the phone....
same problem with samsung galaxy s2
Hi everyone, i am having the same problem with a samsung galaxy s2 and a opel corsa 2010. it connects, i can dial numbers, i can make phone numbers but i can't hear anything and nobody can hear me. if i un check the freespeech box it automatically uncheck the headseat on the phone.
so if anyone found any solutions i would appreciate if they post the solution.
sainttarry said:
Hi, the problem is an app called "car". It takes control when ever you connect your phone to a car kit. Open the app, it has a steering wheel above it and click on the settings, where it displays the bluetooth symbol. Un-click all the auto launch and auto connect settings. That should cure it.
Click to expand...
Click to collapse
the app does not seems to be present in 4.2.2 is there any other way for fixing the settings, I realy would like to have music over bluetooth
These are responses to the SGSIII I made, but they are JUST as relevant here
Hope they help!
http://forum.xda-developers.com/showthread.php?p=26959345#post26959345
http://forum.xda-developers.com/showthread.php?p=26830352#post26830352
Well, basically my SGS3 pairs with my car just fine, incoming calls will link to the car audio system. However, when I make a (outgoing) call from the phone, it does not link to the car audio system. At first the Headset icon (on Call screen on phone) turns on (green), then automatically turns off when get connected. So it does not link to the car audio. In order for it to link, I have to touch the Headset icon again (make it green). Really inconvenient and uncomfortable, because I have to pay attention to the phone to know when it connects. I checked all Call Setting options but couldn't find a clue. Is this problem just common as the way it works, or can any one help?
I'm on stock ICS, unroot, and my car is Accord 2009. Thanks
Wish I could help you but I have no idea. Mine works perfectly with my new 2013 chevy avalanche. In other words something is screwy with your setup. I dont know if it is the phone or the car but its not supposed to work like that.
Yeah you right. Problem is I don't know whether it's the problem with my car or phone? There's not much of option for bluetooth (Hand Free Link) in the car. I tried all I can find in the phone. Drives me crazy.
Is anyone else having issues with their 5x connecting to their car's bluetooth automatically (I drive a 2015 Subaru Forester)?
My Nexus 5 would always just automatically connect, but since I switched to the 5x I have to either connect to the car from the phone or vice versa.
I'm sure I could work something out with tasker or whatnot, but that feels to me as though it should not be necessary?
I have yet to get back in my car after pairing to my bluetooth adapter (I just paired this morning) but I will check later.
Do you have a list of saved or prioritized devices in the car? I wonder if the Forester bluetooth is trying to connect to your first device (Nexus 5) unsuccessfully.
I have a 2014 Ford Focus. The bluetooth will connect automatically, but I have noticed weirdness when placing calls. The car will take a while to initiate the call and then display an error saying "call cannot be completed". Then, 2 seconds later the call audio (ringing) will occur.
I am hoping that these are just some initial bluetooth issues that will be ironed out.
I had deleted my old device from the car's memory.
Another thing I am experiencing is that even if my phone IS connected, the calls are going through the device, and not my speakers.
It still pauses the music...
It could be either my car or the device. I've heard of other Subaru owners having issues with multiple devices in their car, just wasn't sure if it was a little of Column A and B. It seems likely enough it's a little bit of both.
No issues at all. I have a 2012 Dodge charger with the 8.4 Uconnect. This phone actually connects quicker than my S6 edge did and the sound is louder at max volume (on the phone) than the S6E. The only thing that doesn't work is the text messaging from the Uconnect, but overall I am very pleased.
stu_brainsurgeo said:
I had deleted my old device from the car's memory.
Another thing I am experiencing is that even if my phone IS connected, the calls are going through the device, and not my speakers.
It still pauses the music...
It could be either my car or the device. I've heard of other Subaru owners having issues with multiple devices in their car, just wasn't sure if it was a little of Column A and B. It seems likely enough it's a little bit of both.
Click to expand...
Click to collapse
My in-laws own a 2015 Forester so perhaps next time I see them I'll try to pair my 5X. May be a while before that happens though so don't hold your breath
2013 Honda Civic here (so cool, I know). I'm getting mixed results on it automatically connecting. Sometimes yes, but other times I need to connect manually. Yesterday, Bluetooth audio got really choppy in the car, and I had to restart in order to stabilize that again. Have not seen the choppiness issue with my other Bluetooth devices.
Sent from my Nexus 5X using Tapatalk
I had no problem with my Mazda 5 connecting to my Moto E on 4.4.4, but since the upgrade to 5.1 I now have to turn bluetooth off then back on every time I get in the car for it to connect. Also, the connection can drop. I tried deleting existing connection data from both car and phone, setting up from scratch, but it hasn't made any difference. Wish I could downgrade by phone's OS back to 4.4.4.
Might depend on the sound system. Reconnects to my 2013 VW Passat every time.
Sent from my Nexus 5X using Tapatalk
No issues in my Audi or aftermarket radio in the Subie... It sounds like you may not have calls being routed through the phone (based on your comment), maybe that is causing the connection issue? Something like only a phone connection is automatically connected (and the audio comes with it), but an audio connection is not?
I have a 2011 Mitsubishi Ralliart and i don't have any issues with my 5X auto connecting to the factory bluetooth system, my problem is the factory bluetooth is garbage since any time someone calls there is too much interference i can't hear what the other person is saying.
JC Why said:
I have a 2014 Ford Focus. The bluetooth will connect automatically, but I have noticed weirdness when placing calls. The car will take a while to initiate the call and then display an error saying "call cannot be completed". Then, 2 seconds later the call audio (ringing) will occur.
I am hoping that these are just some initial bluetooth issues that will be ironed out.
Click to expand...
Click to collapse
Exact same issue here but with a Kia. As soon as the phone "reacts" to a call being started on the headunit, the headunit says "call was hung up". As soon as the call is answered, it offers to be used for handsfree. It's as if the phone's "CallStatus" messages over bluetooth aren't correct
Subject crosstrek 2014, BlackBerry z10 never had an issue whatsoever, but since I got my 5x, I get half a connection (Bluetooth connects with no audio), with 6.0.1, no automatic connect... Blackberry's reputation may be downhill, but I sincerely miss its reliability and the hub...
Nexus 5X and 6P Uconnect 8.4 Grand Cherokee 2014
I recently started experiencing a similar issue.
I use my 6p for music and audio only, and my 5x for phone calls and sms.
About a week ago, they would stay connected as long as nothing was being streamed. However, as soon as I received a call on the 5X, the phone would lose BT connection to the system, and then connect back after about 30 seconds. It would do that throughout all of the calls, regardless of the length of each call. After the first 2 calls, I started streaming music from Google Play Music on my 6p, and the same thing would happen.
I removed Uconnect from both phones, and both phones from Uconnect. Paired them back again, and it is still doing the same thing.
I will try resetting the Uconnect to factory default later today and see if it has any positive effect, and will post my findings here.
If anyone else has a uconnect system with the same issue, please post it here, and we can try looking for a solution together.
Thank you,