Develop Bugs

HTC Sync/One X and Windows 7 64 drivers

Hi all,
I know that are several posts on here about this issue, but none of them are helping me.
I've installed HTC Sync 3.2.10 on a Windows 7 Professional 64 but when I connect the One X the computer doesn't see it. Since then I've unninstalled and installed the HTC Sync several times and now I've installed the HTC Sync 3.2.20 but without sucess.
Can someone give a tip on how to put this to work?
I even tried to install the driver manually going into the HTC driver folder but also without success.
Thanks

Any ideais? For 2 days that I have the phone and I can not even put a decent ringtone due to this problem.

Try airdroid you can find it in the market.
Gesendet von meinem HTC One X mit Tapatalk 2

I had no issues at all with a Win7 X64 computer. Make sure you're using the original cable, and that it's plugged into one of the motherboard ports, not off a hub/front port etc.
And I assume I'm asking a silly question, but you are looking at the phone when doing this? When you plug in you have to pull down notification, select the usb option, and select sync/charge/disc drive etc.
M.

htc Sync Driver
please guys, I tried all the ways to get my MOX recognized by my PC, but there is no yet !!!!
I installed and Uninstalled many times !!!
so what I have to do ?? please help

How I installed HTC Drivers on the One X (64-bit)
ENABLE USB DEBUGGING FIRST !​
1. Download this.
2. Extract it anywhere easy to find (I recommend Desktop).
3. Connect your phone.
4. Press Start, search for Device Management.
5. You should find something like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. Click on Other>HTC.
7. Click Update Drivers.
8. Click Browse my Computer for Driver Software.
9. Click Let me pick from a list of device drivers on my computer.
10. Click Show All Devices
11. Click Have Disk.
12. Click Browse.
13. Navigate to the Drivers you unzipped earlier.
14. Inside it, look for androidusb.INF and click open.
15. Choose My HTC
16. Now it should say it successfully installed.
If it doesn't, it means you have a 32-bit PC and you tried to use 64-bit drivers. It WILL NOT work. If you're a 32-bit user, here's the 32-bit drivers. Just follow the same steps as above but use these drivers instead.
Hope this helps, this is the only advice I can give to people having trouble with connecting their HOX.

Try wit Factory reset its a common issue after JB upgrade,because after every software upgrade inside phone must be all partitions cache formatted.
Sent from my HTC One X using xda app-developers app

I did all of these, but the problem still as it is

Not had a single problem getting my HOX recognized by my pc running win 7 home premium x64.
I did find with the upgrade to JB that it needed a bit of help though.
Try this, when you plug in your phone pull down the top bar.
next press usb connected, this brings up anther menu.
Press usb network setting, this brings up yet another menu.
Now select usb tethering, or internet pass through. i found this brought up the icon for the phone on my pc with out installing htc sync.
Remember to switch back to none afterwards though, this seems to work for most people as a workaround.

Mine finds my phone as a mtp device so its fine
Sent from my HTC One X using xda premium

Problems connecting to PC on latest JB leak from Baadnewz

I am having issue connecting to PC (on XP here but also issues on Vista 64 at home). No matter what I try I can't access storage to copy to/from my PC to my phone. I understand that JB now uses MTP rather than USB Storage, but having spent about three hours now trying to find a solution I have to admit I am completely stumped
Having tried many options without success, and having installed and uninstalled HTC Sync at least six times I have started again from scratch reinstalling everything I could think of which might have a bearing. I have just reinstalled the full SDK, installed Windows Media Player 11 (for MTP), reinstalled .NET 4, installed latest version of HTC Sync, but still when I connect I get an error in device manager with Other Devices>Android Phone (also get the Hardware Wizard popup which always ends up saying not installed/could not locate software even if pointed directly at the Google USB driver folder in the SDK so it's obviously not this), and in HTC Sync it always shows no device connected. Fastboot and ADB both see it (devices). If I disable USB Debugging then it is recognised as an MTP device but then the Android Phone error kicks in and Sync doesn't see it.
This is my issue:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
...and this...
Both of these are taken with the phone connected to PC, and whilst connected I can run ADB commands!
What am I missing? This is driving me mad

Try the Universal Naked Driver.

leppie said:
Try the Universal Naked Driver.
Click to expand...
Click to collapse
Well that sounds like fun What is it?

Dunc001 said:
Well that sounds like fun What is it?
Click to expand...
Click to collapse
Haha sounds like fun.
I think its a generic sort of driver

Wilks3y said:
Haha sounds like fun.
I think its a generic sort of driver
Click to expand...
Click to collapse
Hmm, found it - it's just drivers for ADB/fastboot which I don't have an issue with. This is my issue:
...and this...
Both of these are taken with the phone connected to PC, and whilst connected I can run ADB commands!

Dunc001 said:
Hmm, found it - it's just drivers for ADB/fastboot which I don't have an issue with. This is my issue:
...and this...
Both of these are taken with the phone connected to PC, and whilst connected I can run ADB commands!
Click to expand...
Click to collapse
On the Android device in device manager right click then uninstall, tick delete drivers if the tick box is there (sometimes it isnt)
Keep doing that until it doesn't even say android device (it will keep reinstalling it) it should say unknown device or something similar. Then reinstall the htc driver software and try again
Windows buggers up like this sometimes, has several drivers for the same thing, AFAIK its a case of getting rid of all the "spares" and installing just the one driver
Hope this helps
Sent from my HTC One X using xda app-developers app

Dunc do you try on another PC?

jamm513 said:
Dunc do you try on another PC?
Click to expand...
Click to collapse
+1 if it's a driver thing then this should confirm it
Sent from my HTC One X using xda app-developers app

Long press to kill app

Hi,
I need kill app with long press back button. How to do that?
I have HTC One unrooted stock rom.
Is there any option in settings or developers section?
Please help

atlantisu21 said:
Hi,
I need kill app with long press back button. How to do that?
I have HTC One unrooted stock rom.
Is there any option in settings or developers section?
Please help
Click to expand...
Click to collapse
Use santod mod, search one development

ZeroDroid said:
Use santod mod, search one development
Click to expand...
Click to collapse
He is using a stock, unrooted phone.
And you don't know which android version he is running...
So why you recommend this mod?
I think with a stock phone it's not possible to do this.

I have 4.4.3 android. I can root if no another solution..

atlantisu21 said:
I have 4.4.3 android. I can root if no another solution..
Click to expand...
Click to collapse
Unlocked bootloader?

Nothing unlocked.. Maybe this can do with some launcher app?

atlantisu21 said:
Nothing unlocked.. Maybe this can do with some launcher app?
Click to expand...
Click to collapse
This has nothing to do with the launcher.
It's not possible with a stock phone.

atlantisu21 said:
I have 4.4.3 android. I can root if no another solution..
Click to expand...
Click to collapse
Yes you need root after that sense toolbox or gravity toolbox with xposed

yatindroid said:
Yes you need root after that sense toolbox or gravity toolbox with xposed
Click to expand...
Click to collapse
Sense toolbox look great.
I tried to unlock yesterday, but my Windows desn't recognize usb device.
It say "Unknow device". Only charging work...
I installed many of drivers for Windows 7 64bit, HTC sync and also contacted HTC support and nothing solve my "USB not recognize" issue.
Changing 2 usb cables and nothing.
This is strange, long time ago when I connected all is worked fine. Now PC can't recognize.
I lost 4 hours and nothing........

atlantisu21 said:
Sense toolbox look great.
I tried to unlock yesterday, but my Windows desn't recognize usb device.
It say "Unknow device". Only charging work...
I installed many of drivers for Windows 7 64bit, HTC sync and also contacted HTC support and nothing solve my "USB not recognize" issue.
Changing 2 usb cables and nothing.
This is strange, long time ago when I connected all is worked fine. Now PC can't recognize.
I lost 4 hours and nothing........
Click to expand...
Click to collapse
remove HTC Sync not drivers Restart PC
reboot phone to fastboot / adb / recovery mode reconnect
if still show Unknown device try to update driver then restart reconnect
see pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

yatindroid said:
remove HTC Sync not drivers Restart PC
reboot phone to fastboot / adb / recovery mode reconnect
if still show Unknown device try to update driver then restart reconnect
see pic
Click to expand...
Click to collapse
Last time I removed all (sync and drivers)
I will try remove just sync without driver.
And I'm not tried in fastboot.
Thanks for idea, I will report later what I did.

I tried this, tried on another computer and tried host mode but all methods can't see usb.
So I remember now, about month ago, I dropped my phone into small water, only part with connector.
After drying I tried to charge and worked, but I not tried connection to PC...
And conclusion, I must go to moblie service to solve issue.
If issue get solved, I finally can unlock bootloader....
Now good news: I solved problem with kill app.
I download Tasker app, set kill and restart. After that I created shortcut on desktop.
All works like charm! :good:

I need help unrooting my at&t LG G3 D850!

Hey guys, I am having a lot of trouble with my LG G3, and I'm at the point where I'm desperate for help.
As the title says, I'm trying to unroot it and install the stock firmware back onto it (currently running Lollipop 5.0.1).
I have looked at many different guides and they all have basically had me do the same thing.
Here is what I've done so far:
- Downloaded the D850 stock firmware (TOT file)
- Downloaded the dll file that came with it
- Downloaded the LG Flash tool
- Downloaded and installed the LGUnitedMobileDriver
Here is my issue:
When I plug the G3 into my laptop in download mode, the port does not show up in the device manager (as you all probably know, I need to access the port properties so I can change the COM#)... The only thing that shows up is "LGE Mobile USB Composite Device" and it's under Universal Serial Bus controllers.
Just for giggles I decided to click on preferences of the LGE Mobile USB Composite Device and the device status read:
"Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
{Unable to Load Device Driver}
%hs device driver could not be loaded.
Error Status was 0x%x"
The question:
I have heard of other people having the same issue with the port not showing up, and to fix it, they had to uninstall their drivers and re-install them. That's where my noobie-ness comes in. Exactly what drivers do I have to uninstall? Where do I find them? Are they found in the Device Manager? If so I have no idea what to look for. Am I supposed to uninstall the LGUnitedMobileDriver that I installed earlier? Because I have no idea where that installed to, and I can't find it! Sorry this is probably a dumb question but I'm stumped.

I just install new drivers over the old ones. Also make sure usb debugging is off also in device a
Manager it needs to be set to port 41

TheMadScientist420 said:
I just install new drivers over the old ones. Also make sure usb debugging is off also in device a
Manager it needs to be set to port 41
Click to expand...
Click to collapse
Yeah, I know that it has to bet set to 41. I actually have debugging on. Maybe that was the issue... Lets see what happens when I turn it off! Also, it has to be plugged into a 2.0 port on my computer right?

GuyInTheSky said:
Yeah, I know that it has to bet set to 41. I actually have debugging on. Maybe that was the issue... Lets see what happens when I turn it off! Also, it has to be plugged into a 2.0 port on my computer right?
Click to expand...
Click to collapse
Turned off debugging, tried it again, but nothing has changed. :crying:
This is all that shows
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

GuyInTheSky said:
Yeah, I know that it has to bet set to 41. I actually have debugging on. Maybe that was the issue... Lets see what happens when I turn it off! Also, it has to be plugged into a 2.0 port on my computer right?
Click to expand...
Click to collapse
Yea no 3.0 somtimes u gotta fool with it diffrent usb ports back and forth. Flash tool is real picky sometimes. Sometimes it would take me close to an hour to get it to read rite. To the point i know all is rite just kept failing. Finally goes through

TheMadScientist420 said:
I just install new drivers over the old ones. Also make sure usb debugging is off also in device a
Manager it needs to be set to port 41
Click to expand...
Click to collapse
By the way, when I try installing new drivers over the old ones, it says:
"You will have to uninstall the previous version before installing this version."
And I have no idea hoe to do that.

GuyInTheSky said:
By the way, when I try installing new drivers over the old ones, it says:
"You will have to uninstall the previous version before installing this version."
And I have no idea hoe to do that.
Click to expand...
Click to collapse
Plug in the device so it shows up in device manager click on it in device man. I think left click and ule get more options like update driver or properties. Once u left click u can find the option of either update disable or uninstall. Im not near my computer or i could walk you throught it better. Rite there near where u change the com number to 41 1 or 2 sub menus before it

Can't find my device in fastboot mode

Hi, i want to unlock the bootloader of my old Redmi note 5, but there's a problem, when I go into fastboot mode, the Xiaomi's software can't find it, even using ADB the device is impossible to find. If I turn it on normally i can find it. Why it happens?

Hey u may give this a try as based on my understanding Xiomi devices will require u to install mi flashtool on PC as it has driver installation option. Remember some times you are required to disable driver signature verification.

I recently had trouble with fastboot as well. I eventually sorted it by installing the correct drivers, from here: http://bigota.d.miui.com/tools/xiaomi_usb_driver.rar
I don't remember having to disable driver signature enforcement (usually to do this you have to use an advanced boot option as shown in Option 2 here) but maybe it happened automatically.

plusminus_ said:
I recently had trouble with fastboot as well. I eventually sorted it by installing the correct drivers, from here: http://bigota.d.miui.com/tools/xiaomi_usb_driver.rar
I don't remember having to disable driver signature enforcement (usually to do this you have to use an advanced boot option as shown in Option 2 here) but maybe it happened automatically.
Click to expand...
Click to collapse
I installed the driver but nothing changed. I post a screenshot of the situation , as soon as i go into fastboot mode the adb can recognize the device, but after few seconds not.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Fruso01 said:
I installed the driver but nothing changed. I post a screenshot of the situation , as soon as i go into fastboot mode the adb can recognize the device, but after few seconds not.
View attachment 5260567
Click to expand...
Click to collapse
Weird.
Maybe try a different cable?

Fruso01 said:
I installed the driver but nothing changed. I post a screenshot of the situation , as soon as i go into fastboot mode the adb can recognize the device, but after few seconds not.
View attachment 5260567
Click to expand...
Click to collapse
U might be using an Amd based system. Usb 2.0 hub is ur solution

Fruso01 said:
I installed the driver but nothing changed. I post a screenshot of the situation , as soon as i go into fastboot mode the adb can recognize the device, but after few seconds not.
View attachment 5260567
Click to expand...
Click to collapse
lool win10 sh1t... use usb 3 reg patch or usb 2.0 hub. Search it on xda forum.
Btw. There is no problems on w7 and linux lool.

drnightshadow said:
lool win10 sh1t... use usb 3 reg patch or usb 2.0 hub. Search it on xda forum.
Btw. There is no problems on w7 and linux lool.
Click to expand...
Click to collapse
Can you tell me about this usb 3 reg patch?
Actually i am outstation and don't have my usb hub and i want to do faatboot commands

Why my note 5 pro not connecting with pc after installing any custom rom.i have proper usb driver and everything like adb fastboot..but not showing any device in my computer ...can anyone help me

Banty448 said:
Why my note 5 pro not connecting with pc after installing any custom rom.i have proper usb driver and everything like adb fastboot..but not showing any device in my computer ...can anyone help me
Click to expand...
Click to collapse
Read the thread and don't be troll. You didn't even read post before you post it your own. Ignorance is a bliss.
Good luck and stay safe.