Related
Hello,
The reason why anyone would do this is for example - I installed the Rogers WM6 but preferred the HTC BOOTSCREEN Image - hence why i personally did it. I did not like Rogers BootScreen Images as they take too long to boot as well as the bootscreen image in the Rogers WM6 used to load after the Green Windows Mobile Screen and on power-up, it used to have a black screen instead of the bootscreen image which to me did not seem practical as I rather see that the phones turned on right away than wait till the Windows Mobile screen loads. I've successfully flashed HTC Bootscreen image using the following steps. I had a member ask me how to flash .nbh files to phone. I'm talking specifically about the bootscreen .nbh images. In order to flash .nbh boot screen images - you have to flash through USPL. Here's how to do it -
1) Firstly, Download all required files that is
a) USPL CID -BYPASS
b) RUU
c) SDA APPLICATION UNLOCK
d) BOOTSCREEN IMAGES(IT CONTAINS HTC, ROGERS AND TMO BOOTSCREEN IMAGES)
2) Copy/Paste RUU File that is ExcaIMG_USPL_1110000unsigned.nbh to the desktop.
3) Copy/Paste ANY of the preferred BOOTSCREEN IMAGE (i.e. for example HTC.nbh) to RUU directory
4) Right Click ExcaIMG_USPL_1110000unsigned.nbh and Select Rename - Press Ctrl + C to copy file name
5) Head over to RUU and Right-Click HTC.nbh, Select Rename - Press Ctrl + V to copy over existing file name.
6) Once you're done this, REMOVE SD CARD AND REBOOT PHONE
7) Once done, APPLICATION UNLOCK YOUR PHONE IF IT HASN'T ALREADY BEEN APPLICATION UNLOCKED - YOU HAVE TO RUN SDA APPLICATION UNLOCK.
8) Now, Run USPL, Make sure you follow proper instructions as this is the main thing - if everything done right, you'll see screen goes into dim black with penguin and green messages, wait until you see the screen turns white then go to active sync and disable usb connections.
9) After this, run RUU and it'll use the re-named file which is the boot screen image to update the boot screen image. It will take max. a minute or two.
10) Once done, I think you see the tri-color screen but there won't be a cold boot - It'll reboot i think and go directly to the main screen.
11) Reboot and see if you see the preferred boot screen image.
For now, I'll post HTC, TMO and Rogers Boot Screen Images. We should still try as a group to create Custom Boot Screen .nbh files. If someone who know's how to make it, please share in this discussion.
Also, Does anyone know how to bring back the "Vibrate" mode during startup and shutdown?
Good Luck ! Post any concerns or any questions
NOTE: Please follow proper instructions, otherwise it won't work. If i'm missing anything, please let me know as I did this flash yesterday and I'm writing the guide today. Also, YOU HAVE TO FLASH THROUGH USPL - IT DOESN'T MATTER IF YOUR PHONES CID UNLOCKED OR NOT.
Credits go to da_mayhem for uploading the images.
sweet, thanks... I'll try this later tonight after i get home from work... or tomorrow
woohoo, sweet... thanks for the guide lukybandit.
On step #2, you'll want to "Cut/Paste" if you copy, it leaves the original file in the folder, so renaming the HTC.nbh isn't possible unless you delete the original file.
also, step #8... DEFINATELY make sure you disable USB connections, i tried without and it didn't work...
However you're supposed to do that for WM6 rom updates also, but i never have, and haven't had a problem... until now that is.
Change HTC Splash Screen
Hello,
How to change the HTC splach screen which appears just after powering on the device?
I tried a lot of tools but I did'nt found one which works. Is it because the Excalibur screen is 320x240 instead of 240x320?
Does someone knows how to do?
StefanSki
StefanSki said:
Hello,
How to change the HTC splach screen which appears just after powering on the device?
I tried a lot of tools but I did'nt found one which works. Is it because the Excalibur screen is 320x240 instead of 240x320?
Does someone knows how to do?
StefanSki
Click to expand...
Click to collapse
replace Shutdown.png in windows folder,with 320x240
i tried this i created a .png file but when i try to place it there access denied lol it wont let me touch anything in the windows folder
This is not this splash screen I mean.
I am talking about the first one, which is in the NBH file as a NB file. I don't manage to make a good NB file in the right format to flash it using RUU.
nbh file wat folder wuld that b in because i jus changed my shutdown screen and i want my turn on screen to b da same as that one
blahzay_blah said:
i tried this i created a .png file but when i try to place it there access denied lol it wont let me touch anything in the windows folder
Click to expand...
Click to collapse
you need total commander to overwrite
No one knows how to make a NB file that contains the splash screen? The default HTC NB file begins with "this is smartphone signature".
i changed my shutdown screed with resci explorer but to change the start up screen the htc screen and the freen windows mobile screen i want to get rid of those ugly screens
any1? a little help lol just want to change the start up splash screen any1 know how
You can use nbimg, to convert from NB to BMP.
For excalibur you'll need to use the following syntax:
Code:
nbimg.exe -F MainSplash.[nb|.bmp] -w 320 -h 240 -n
Also you'll need to add the "this is smartphone signature" manually to the generated NB file (using an hex editor). Maybe I'll add support for doing this automatically if there's a need. PM me as I'm not following the thread.
just saw on another thread how to create a .nb file from a .bmp .... i placed this here because apparently luky got the tmo and rogers .nbh files which have the mainsplash.nb files in them. need to know how to take the .nbh files he included and replace the mainslpash.nb and mainsplash.bmp files with the ones i created
heck i'll even upload the images here if someone wants to show me what to do
i was able to get the .nbh file created but when i flashed the phone with that file the first screen now looks like a green gradient image and not the image i put in the .nbh file
thanks for this man much appreciated.
Ok so i'm just wondering if there is a way to go into an existing bootanimation file and add a wav file into the sequence of the description text file. And also where would you put the wav file in the zip file. Also can you do this without using ADB, not a big fan of it(meaning I don't know how to use it) It should just be as easy as throwing the file in the zip file and writing the new description text code to run it properly. Just I don't know how. please help
What ROM are you on? How did you get your current boot animation onto your phone w/o adb?
I used Ava-froyoZ2, and for the bootanimation i downloaded one put it on the root of my sdcard and then using root explorer i moved that file to /system/customize/resources then pasted it in there. So all i need to know is how to put a wav file in the bootanimation zip file and write the description text so it'll execute that file.
It's not a wave file it's mp3. It is also not part of the bootanomation zip, it is its own file. Search the forums for pushboot and use that. You should learn to use adb because from your questions in here you more than likely will boot loop your phone and have to nand restore just to get out of it. I have fixed bootloops with adb many times and I now only keep a solid backup of my rom once every 2 weeks.
Ok, secondly; With that rom or if it even is the rom, it doesn't allow me to put my phone in debugging. I have ADB blah blah blah just i'm not that good with CMD, but it never recognizes my phone due to that fact of the debugging. When I go into the settings I can check it and uncheck it. So I don't know what that problem could be.
Hi all,
I am trying to develop a rom but I came along this difficulty: I can't find the sysyem.img. I tried to download a .zip file, only the folder named "system" came in it. And I tried it with a .exe and looked in "%TEMP%" no luck either...
Can anyone explain how I should extract the system.img?
Thanks in advance.
I guess your referring to a nandroid backup really. When you download a rom, it comes in a zip file which you can flash and has only a boot.img file (I think, can't remember off top of my head) so it can boot. It doesn't have anything else. You only see a system.img file when you do a nandroid backup. Everything that is in the system.img file is still the same as the system folder in a zip file.. more or less.
If you do have a system folder, it is possible to convert it using the HTC Kitchen
http://forum.xda-developers.com/showthread.php?t=633246
That should help heaps with ROM development
Can you please explain to me how I can convert the system folder, I don't have a clue.
Convert it how? How do you want to convert the system folder? And why? Might help us out more you know.
On "Theunlockr" (My guide for making a rom) It says
"If you have a .zip file, you can unpack the system.img and boot.img"
I only have the boot.img and a system folder!
And it also says: "If you have a .exe, run it until the first screen and then go to run and type %TEMP% and a rom.zip should be here"
in both cases it is not the case.
So, can anyone help me out please?
I'm new to this and just need a tutorial on how to create custom splash screens on a Evo. If any one can show me or post a link that be great.
Download this and unzip it. (On your computer)
http://db.tt/YLmI87K
There's a how-to included in there that tells you how to use it.
Sent from my HTC EVO 4G with Tapatalk
there's also a program called nbIMG, along with the one mentioned above.
Thanx working great!!
These instructions work for anyone who rooted using the "UnrEVOked" method such as that given at HTCEvoHacks.com. I have not tested these instructions with any other root method out there.
For the sake of these instructions, all references and instructions dealing with PhotoShop are assuming you are using PhotoShop CS5. Cammands may be slightly different on older versions of PhotoShop, so it may take a few extra clicks to find what you're looking for.
1. You can download custom boot images from the web, or create your own in PhotoShop using ANY sort of photo, graphics, text, or combination. You MUST make sure that the image size is set as the same for the EVO's screen resolution (480x800). For this reason, I would double check any image file you try to use prior to converting it for use with your phone.
2. Open your image file in Photoshop and make whatever tweaks or enhancments you like. Remember to "flatten" the image prior to saving it out if you have multiple layers in your file. You can use the next step to resize the image first if you like, but depending on your current settings in PS it should not matter.
3. Right click the file window (the one that contains your image) and set the "Image Size" settings to a width of 480, and the height to 800. These measurements MUST be in pixels as well. If you have the "Constrain Proportions" box checked, you may not be able to tweak these individually without affecting the other. So uncheck that box and change the size settings. Click ok to close the box and the image will resize within Photoshop.
4. After you have finished creating your custom image, flattening the image, and resizing it to fit on your phone's screen, it is time to save the file. Navigate to the "file" menu and click "save as". Here, you can choose where to save it, name it, and choose the file format. It's probably easier to go ahead and save it as "splash" now, so that you wont have to rename it later. Either way, this file MUST be named "splash" when we are in the final stages. Save it as the "BMP" format, and you will get a pop-up window for the BMP options. "File Format" should be set to Windows... and choose the depth option of 24 Bit. The "compress" and "Flip row order" boxes should be unchecked, and you do not need to go into any advanced settings. Once you have saved the file, You can close PhotoShop.
Now the File needs to be converted from the BMP format into an IMG file. This is so that the bootloader in your phone will see it when you flash it to your phone.
There are a few conversion tools out there, but I have found Splash Screen Creator to be the EASIEST way to convert the file with a few clicks.
The link to download this small program is here... http://www.addictivetips.com/?attachment_id=43073 ... and it is FREE!!! (I did not create this program)
1. Download the .zip package from the link above.
2. Extract the files. I found that creating a folder on my desktop to secure these files (and these files only) to be less of a headache.
3. After you have extracted the files, you are ready to convert your "splash.bmp" file. You MUST move this file into the same directory that you unzipped the Splash Screen Creator to. It will only find the bmp file in the same directory, which is why having its own folder is easier. Move your "splash.bmp" file to the same folder and open "RUN THIS ONE". This will open the program in a command prompt.
4. Choose option 1 to convert your existing .bmp file into the required .img file. The next option will ask if you would like to flash the file to your phone. This option is not necessary for these instructions, but I have read of others being successful. You can try this option, but if it fails, go on to the remaining steps.
5. Go ahead and close the program by pressing another key to exit. You should see your new "Splash.img" file in this same directory. Rename this as "splash1.img"
Now that I think of it, naming the BMP file to "splash1" prior to converting to the .img format may solve the error when trying to flash the file to the phone
within Splash Screen Creator. The img file MUST be name "splash1" prior to updating it in the bootloader in the next steps so it makes sense that the program would come up with an error at this point. I have not tested this theory at this time, but you are welcome to. If someone does test this, please update these instructions
to save from many unnecessary steps below!
Your next steps require access to your original "PC36IMG.zip" file that you used during your root process. If you do not have your original "PC36IMG.zip" file, you
can try to download one here... http://forum.xda-developers.com/showpost.php?p=8913849&postcount=156 ... I have not tested this file yet, but worth a shot if you dont have it.
1. Make a COPY of your "PC36IMG.zip" file and move it to your directory where you have worked with the custom splash files. This saves from getting confused between files and flashing the wrong one to your phone. You're also making a copy so that your original "PC36IMG.zip" file is NOT altered.
2. DO NOT unzip the file! Simply drag your "splash1.img" file over to your zipped "PC36IMG.zip" folder and copy it in there. If you get a prompt to overwrite an existing "splash" file, go ahead. Afterall, you are working with a copy of the PC36IMG.zip.
3. After you have added the "splash1.img" file into the "PC36IMG.zip" folder, you can now move the zipped folder over to your sd card. Make sure that it is the ONLY copy on your sd card, and that you have not placed it in any other directories. BOOTLOADER WILL NOT FIND IT IF IT IS IN ANOTHER FOLDER!!!
4. AT THIS POINT YOU WANT TO BE SURE YOU HAVE BACKED UP YOUR ROM!!!! YOU WILL LOSE YOUR CURRENT ROM AND DATA AFTER THE NEXT STEP!!!!
5. Reboot the phone into Bootloader by holding the volume down button and pressing power. The bootloader will find your "PC36IMG.zip" and ask you if you want to update. Press the volume up button to say YES! Grab a coffee, chug a beer, or take a piss, cause this step takes a few minutes.
6. Once the bootloader has finished it's update, reboot your phone. it will now display your new custom splash screen!!! (but you're not done yet)
Because you updated your "PC36IMG.zip" files in the bootloader, you have in effect reflashed the stock rom (rooted of course) back to your phone.
Allow a few mintues for your phone to boot up, log into your g-mail account (so that you have access to the market), and download Rom Manager (or your favorite backup
manager), and restore back to your rom!
Like I said before, I have only done this on the HTC EVO that has been rooted using UnrEVOked through the process explained on HTCEVOHacks.com. I have no idea if
this process will work with other configurations, and I accept no responsibility for the outcome of your actions!!!!
Can't u flash these also ??
neno2323 said:
Can't u flash these also ??
Click to expand...
Click to collapse
They're "flashed" in the bootloader, as a PC36IMG with the file being respective to how you rooted. You can also "flash" them using fastboot, but that can only be done if you're on the .76 bootloader.
This morning I deleted my system camera app and that made my phone bootloop. After some trickery I managed to install a new version but lost all my photos and files along with root. Can I get a tutorial how to create my own boot image with magisk so I can hopefully recover some of the photos. Thank you
Hey, there might be more ways, but this is the one I follow everytime I root my g7.
Download the firmware (.kdz file). You can get that here.
In the meantime (the download will take some time) you can search and download a tool called "LG Firmware Extract", mine is v1.2.6.1. If you struggle finding it, you can download the one I attached (for Windows).
Once both are downloaded, open the firmware extractor and there click "Open" next to "KDZ File" label and locate the .kdz file you just downloaded. You can also type in the file path instead of locating.
In the table of files below, check the largest file starting with G71030f and click "Extract KDZ"
In the working directory (marked as "Working folder ..." above the table) you should now find a file named after the file you checked. Locate that one on "DZ File" row by clicking "Open" next to it.
Now in the second table, find a file called boot.img_65286, check, Extract DZ.
The file should be in the same directory previous one (G71030f...) was. Rename it to boot.img.
Send the boot.img to your phone
Install Magisk Manager, open, click "Install magisk"
On method selection choose "select and patch a file" and pick the boot.img file and proceed.
That's it, you should be told where your patched image sits.
In case you want to skip steps 1 to 7, I attached a boot.img file. I also attached a patched boot.img, since I did it for mine, too.
BTW if you choose to download the firmware extractor from the attached files, you can find a short tutorial on how to extract boot image in a text file inside.
Hope it still helps you.