hi guys,
I hope someone can help me.....
today I install some app to give extra animation and crap but after I ve done it the phone keeps restarting after I slide the srceen to unlock it.
I have done a hard reset formated the phone and cache and still the same,
I have also tried to flash it but RDS came back with " unable to retrieve info from INI file.
sim card is in but there is still "no service" on,
I ve looked through the forum but non of the posts seems to desrcibe my problem.
cheers,
p.s I forgot to add that my rom was 2.51 uk as far as I aware
regards,
hi,
the 'unable to retrieve ini file' could be because of your usb ports.
however,
if you go to recovery mode( hold vol- during startup then vol+ and vol- simultaneously when you see a little green man) you should be able to get a menu which will let you do a factory reset( clear data) which should make the phone work.
cheers
hi,
yes and I ve done it twice already and still rebboting after unlocking the screen
ane other ideas??
I ve treid to dowload rom but it wont extract and the other one saying that about ini file.
cheers,
hi again,
were you trying to install a flashlight fix zip btw before all this happened?
if so, the only option is a full flash.
try it with a different computer but i think at this moment rsdlite is the only hope.
i know because it has happened to me quite a lot.
cheers
hi,
I thinking the same, however, every rom I download doesnt work,
and now stupid question...where can I get a uk rom from??
cheers,
just check the android development section for the defy,
there are plenty of choices for a uk rom.
download one and flash it with rsdlite from a computer with usb 2.0 .
thats the cause of the ini error apparently.
good luck.
hi,
any link please??
I ve not been lazy its just I dowloaded two already and none of them work,
and now even RSD wont find the phone...just great saturday hahaha
cheers,
http://m.cfa.aero/
credit to fritolays.
go to the last link. CEE deblur< download that.
for rsdlite, keep trying, youll get there eventually.
thanks would be appreciated.
cheers
hi,
I will keep trying and if it wont help then I will have to go to t mobile and change my handset again,
Thanks a lot amansth
.....right guys please RSD saying couldnt retrieve values from INI file, I dont have access to any other PC so is thre any other way??
I ve got one txt file in the folder with firmware with this number in 09a6752e6119bb69c02d02f06a68d17e maybe that just need changing?? I dont want to mess about with it too much cos I m just a rookie
thanks,
...... Hi guys,
After a 6 hour fight I finally managed to flash my phone and it works, old RSD for some reason wouldnt support the phone so I got the new one and I could sleep much better
The only issue is that I liked 2.51, not necessarily the whole blur thing but I still think software looks much better and for example, mail box wont open, not the google one but the other that Ive added. Market place looks quite old compare to how it looked on 2.51, for eg the buttons for apps,games and apps look like big grey brick where in the other one there where nicely "implemented" into the market website.
however, I could not load 2.51 on my phone because it would stay on black screen with white LED on. I ve tried couple of times and always the same.
maybe I m doing something wrong?? what are those 2.51 boot only for?? I ve tried to put that in first then the firmware and still the same.
thanks all,
hi,
sadly, downgrade to 2.51 isnt possible because you upgraded to the froyo roms, the bootloader is newer so it is impossible to go back.
still, the froyo roms are generally better but somehow they seem laggy sometimes.
hopefully since motorola is pushing beta builds and the actual froyo release will come out around april- may you wont have to stay with the blocky icons for long.
Related
OK my BELOVED X51v screen is on the fritz
(From an erlier post i made from a diffrent thread)
*********((Has any one else experianced flashing lines across the screen that almost looks like stactic off the the TV? I started getting it after I flashed to the newest ROM, I've tried to reflash twice, after the initial flashing, but im still getting the same problem. The "static" even showeed up on the boot screen of the firsat REflash. It seemed to get better but now I picked it back up and it was still doing it just a little bit, but enough to scare the crap out of me and let me know I didnt fix the problem even though it made it like 90% better than what it was, At first i couldn't even read the screen it was so bad. Im hoping I had a bad install with a corrupt file or somthing and not that my bassically new X51V is already broken. Im reflashing to the last rom now hopping that might fix the problem, If anyone knows what might be my problem I grately appreciate any advice. Also if this means anyhting it seems to get even worse when im playing music on it and the screen dims, it was looking fine with the back light on but then screwing up everytime that I turned the light off, I could be nothing because other times it was messed up even with the backlight on.))*******
and i cant find anyway to fix it so im thinking about sending it back to dell to see if they can either replace it or fix it, my ownly problem is i cant send it back with a "cooked" ROM. I tried to reinstall my WM5 A12 rom but when it goes to install the new ROM it disconects from my activesynct and my Windows Mobile Device Center depending on weather im trying to do it on my Vista computer or my XP. I REALLY want my x51v fixed, i tried getting the SD version of the A12 ROM but you have to make it yourself and i cont figure that part out, i can get up to the .nb0 file conversion but for the life of me i cant figure out how to make a .crc file that will work. Does anyone Please know a link to a downloaded pre-converted A12 file or atleast know how to help me figure out the stupid .crc file thanks so much in advance PLEASE help!!!
Drakey83
So Dell is going to send me a new PDA right now and I was just double checking that since I flashed back to the dell WM5 A12 ROM theres no way that they could find out that I used a Baked ROM right?! Just making sure so that my warenty Isn't discovered as void and I have to send my new PDA back.
Hi guys, I've read and used the forum for years and upgraded my Cingular 8525 a ton without troubles (followed Vanx's method for vista and for upgrading), but this is the first time I'm really stuck without a clue.
I had Schaps latest OS on my phone working fine for about three days. It was charging with the USB hook up to my Computer. I pulled the USB out and the phone entered bootloader. I couldn't get it out. I tried using mtty to no avail, hard reset ect., but finally used the SD loading method to put TNT's latest on it (don't know why this worked). Here's the thing though, the phone will load fine on first load after I flash, but if I soft reset or turn the phone off and on it goes right into bootloader mode. The only way I can get it to load up again is to connect it to the computer's USB, take out the battery and then put it back in. the OS then boots up without fail.
I have read a ton and searched on the forum, and if any of you can help me understand what the hell I can do to fix my phone I would really appreciate it. I will post anymore info you guys would like, I really need your help on this one.
Thank you so much!
Hi,
I posted exactly the same problem today ! here:
http://forum.xda-developers.com/showthread.php?t=381284
It's really strange !
Dave
I've been reading everything and it appears that Schaps's new version seems to have this problem sometimes....I have the exact same problem as everyone else (mtty gives me the same results), and flashing a new rom doesn't get rid of it....I hope there is some way to fix this!
maybe I'll try flashing a new radio and see if that helps things....
I did notice that flashing Schaps 4.31 seems to include radio 1.50 and I had changed my anyway to 1.43 as I thought that was better for my area.
Not sure a radio will help. Maybe a different ROM version will ? Maybe 3.54 ?
I have flashed TNT's rom as well and it still has the problem now....I'm flashing a new radio as I type, I'm going to have to reflash the OS too, it just got stuck again as it was restarting.
Just a quick thing, I think I have solved my problem (not sure if it is permanent) by powering the phone off and on. Not resetting, just a simple power off. I spoke to a colleague who said the way it shuts down is different to soft reset (makes sense) and I haven't powered my phone off properly for a long time.
I have tried soft reset a couple of times since doing this and it hasn't gone to the bootloader screen once.
Maybe this is the simple fix.
I will keep you posted.
try to flash OFFICIAL ROM first , maybe there are few bug / missing file when error appear while flashing other ROM.
I hope it will help you both.
rgds,
ermen
Use mtty to see if yo have any bad blocks... I've had a few problems the same as yours and found I had 1 or 2 extra bad blocks, after the 2 "factory standard" bad blocks I got on my jasjam of course. hope this helps...
My fix didn't work.
Not sure what I am suppossed to see when I run "task 2a".
Has anyone had any luck fixing this ?
Hi all,
Thanks to those who have helped along the way. None of this is my work, I am just putting it all in the one place for those who are in a similar situation as me - wanting to do get onto JG5, but not knowing how. Hopefully you can follow along!
This is the first time I've ever done anything to an Android phone, so consider me a noob! Here's all the files I used - multiupload.com/66CNCCTE4W (you will need to copy and paste the link into your address bar as I can't post links yet
Before you start, I did this on my Australian Samsung Galaxy S, so I'm not sure how different your model is!
Before starting, unzip the downloaded file above to your hard drive, and extract it to an easy to find folder - I'd suggest somewhere on your desktop.
1. Open the Odin3_v1.0 folder
2. Run Odin3_v1.0.exe program
3. Select the PIT, PDA, Phone and CSC files by clicking on the button, then locating the file in the I9000XWJG5 folder
a) PIT - s1_odin_20100512.pit
b) PDA - CODE_I9000XWJG5.tar
c) PHONE - MODEM_I9000XXJG1
d) CSC - CSC_I9000OXXJG4.tar
4. Remove the External MicroSD Card and the Sim Card
5. Turn the phone off
6. Get into download mode by pressing volume down + home key + power button
7. Connect the USB Cable from phone to computer
8. Wait for the drivers to be automatically installed.
9. Once drivers are fully installed, click START in Odin.
And that should be it!
P.s. I had to manually select my Network by going into Settings, Wireless and network, Mobile networks, and then selecting the Network (for me it was Optus). You will probably want to select Swype as the default input. To do this, press and hold a text input field, and press input and select Swype.
I hope this helps - please let me know how it goes for you!
*(Edited to include only flashing phone - I originally thought you had to root it first!)
You don't need to do step one and two.
lol,why bother about root ur device when u can straight away flash it like step 3??
Why do we need step one and two before ?
Since we are going to flash new rom and will need to do those again ????
Didnt work
So i tried to flash my SGS last night but it didnt turn out so well.
put all the bits and bobs in (.pit pda phone and modem) and then connected the phone in Download mode, seemed to connect to Odin, ID:COM 0:[COM20], clicked start, it seemed to be working so went to check on dinner and when i came back it didnt seem to be doing much, screen on the phone was blank and odin looked like it was tring to move across factoryfs.rfs, i look in the CODE file and saw that the factoryfs.rfs file was huge so thought id just leave it and wait. but nothing left it for 4-5 hrs then left the comp on all night when i cam back it was in the same spot but said removed and the phone was showing a phone then triangel with a ! inside the computer. so i unpluged it took out the bat and put it back tried turning it on, same thing, turned it off again and put into download mode seems to work but didnt get a chance to play with it at home, at work now and cant do it because it asks for admi privileges to install the drivers, so ill wait till im home again. anyone got ideas of what it might be? should i have connected to port 7?
Really? There ya go. Told you I was a noob! Sorry to confuse people. I have edited the original post so it only shows the flashing part.
#4 is not needed.
BTW: your tutorial is already stickied in the big faq (post 2).
I think alot of noobs will find this very useful. It's easier to follow for those who are flashing for the first time, i'm sure others wil appreciate your effort.
ZacJ said:
Really? There ya go. Told you I was a noob! Sorry to confuse people. I have edited the original post so it only shows the flashing part.
Click to expand...
Click to collapse
Hey Zac,
Don't worry if the steps are already in post # 2. I find yours better and more direct. More importantly, your phone is also from Australia, same as mine.
Thank you for taking the trouble to post this. I've been helped. I'm a bigger noob I guess
The only problem is that I don't seem to be able to download it. It stops after a few bytes. Know of any alternative links?
Edit: On the other hand, after going through some of the comments on threads related to JG5, all the problems are still there, so I don't see any real advantage over JG3. Will stick to this, since I'm about to get a replacement for my phone soon.
Thank you!! Thank you!! Thank you!! Thank you!! Thank you!!
I really want to thank you 4 this!! Damn you're the man!! This fixed my broked SGS immediately!! I can't thank you enough my best friend 4 ever!!
How do i get Superuser in to this?? And can i use Lagfix 2.0 too?? Please answer to me..i'm so so so damn gr8ful about all your hard work! Do i have to root my SGS again and where i can find the latest file update.zip which works with this your version?? I have already update.zip but it's kinda old file though.
Like i said earlier:
Thank you!!
Thank you!!
Thank you!!
Thank you!!
Thank you!!
PS: I gave 5 stars !!
Dude don't stress!
For rooting/superuser read my tutorial!
http://forum.xda-developers.com/showthread.php?t=728754
After that you can either apply One click lagfix or the CFLagFix 1.80!
I would recommend CFLagFix 1.80!
Buy me a beer if it works
LauncherPro problems
Hiya!!
U have any idea when i installed this jg5 my launcherpro won't work anymore at all, it just force closes all the time and i can't open my phone at all?? Why this is happening??
How do install this but still use LauncherPro??
( Though it works when i install it but immeadiately when i try ty restart my LauncherPro it starts to force close 24/7)
When i did a factory reset it didn't make it completely, it left something in in phone about this jg5...maybe that's why my LP is not working anymore...
Sorry but i'm a noob so don't judge me, i have a question now, where i can get "Stock 2.1 Eclair"?? I have now FRF91.372 2.2 in my phone it works like ****!! I don't even get LauncherPro work without continious force closes...i want that firmware where LP works without any force closes!!
Please help a noob...please, now i know how to use Odin, cause i have flashed already 3 times. But all the firmwares what i've tried have sucked.
PS: Is there any way i can do a raw clean for my SGS before install new firwmare, i ask cause i want to SGS completely empty before i install new firmware, is this possible?? I heard that if you swype your SGS empty new firmware will work much better...but this is just a rumour though
Gothic Touch said:
Sorry but i'm a noob so don't judge me, i have a question now, where i can get "Stock 2.1 Eclair"?? I have now FRF91.372 2.2 in my phone it works like ****!! I don't even get LauncherPro work without continious force closes...i want that firmware where LP works without any force closes!!
Please help a noob...please, now i know how to use Odin, cause i have flashed already 3 times. But all the firmwares what i've tried have sucked.
PS: Is there any way i can do a raw clean for my SGS before install new firwmare, i ask cause i want to SGS completely empty before i install new firmware, is this possible?? I heard that if you swype your SGS empty new firmware will work much better...but this is just a rumour though
Click to expand...
Click to collapse
All the ROMs that are released by Samsung themselves are stock ROMs, e.g. JG5 is a Stock Eclair 2.1 ROM.
I tried to patch my phone with CM9-ICS-MR0-111207-jordan-KERNEL-2.3.4-Quarx build and when I rebooted I get this
bootloader
09.10
err:A5,70,00,00,23
battery ok
ok to program
connect USB
data cable
Now I have googled this and found many options.
So far I have tried these.
droidforums.net/forum/droid-x-hacks/68222-unbricking-your-droid-x.html
When I do this I get a error (in linux ATM so cant tell you the name will get it ASAP) and I have got rsd lite 5.7 and the latest drivers from the motorola site. I have tried many roms and placed it in C:, My documents, in the RSD folder, on the desktop, in the download folder. Always open the program in admin.
Also this:
droidxforums.com/forum/droid-x-sbf/23638-linux-solution-your-windows-rsd-lite-problems.html
I have tried many of there ISO images and all boot and say they start to do something, then it says failed! rebooting and then it reboots and says to remove battery and go into these option (which I cant as it will only boot on the boot loader screen I tried to get into recovery and no luck) so it was a fail also.
I hope there is a solution as this is a pain, I may of put a to high rom on and cant revert back??
I am sick of googling and alot of the links come back to this site and have tried many but all seem to be repetitive and what I have tried.
Thanks in advance
Ok Fixed this site is the best!!! All I done was read the all in one beginners guide and it linked to a rom for the defy plus (all the other defy plus ones I found where folders not RSD files like this one)
So loaded the file into rsd lite and sure enough it went threw.
YAY! I cant believe I recovered my phone! I knew it was something but to find the right image was the trick I guess.
I did install the defy + CM9 image but I am not sure what happened there.
Thanks to all (more so walter79 for the image)
Hope this helps some one out in the future
Ok I got the phone to work with the image posted in the defy + section but when I boot I get no service.
I have tried to do a factory reset and had to input all the accounts again but that did not help.
what can I do?
kelbygreen said:
Ok I got the phone to work with the image posted in the defy + section but when I boot I get no service.
I have tried to do a factory reset and had to input all the accounts again but that did not help.
what can I do?
Click to expand...
Click to collapse
Get the baseband switcher app It changes the network related files to the ones correct for your country/network! You need to set it manually, though, so, it may take a couple of tries to figure out which one is the best choice
http://forum.xda-developers.com/showthread.php?t=1052745
thank you heaps it had telstra in the settings selected it and looks like I have service now. Thank you so much I cant belive I was just about to give up and get a new phone now I have a working phone with 2.3.6 and rooted now I got the network to work again . Super happy, now to see what I was missing out on since I have been pulling my hair out the last few days thinking I got a bricked phone.
kelbygreen said:
Ok Fixed this site is the best!!! All I done was read the all in one beginners guide and it linked to a rom for the defy plus (all the other defy plus ones I found where folders not RSD files like this one)
So loaded the file into rsd lite and sure enough it went threw.
YAY! I cant believe I recovered my phone! I knew it was something but to find the right image was the trick I guess.
I did install the defy + CM9 image but I am not sure what happened there.
Thanks to all (more so walter79 for the image)
Hope this helps some one out in the future
Click to expand...
Click to collapse
Do you have a link for the beginners guide?
ryangus said:
Do you have a link for the beginners guide?
Click to expand...
Click to collapse
[GUIDE] All-in-One Defy Beginner's guide
Hey guys,
I really need to find at least the stock ROM for the new-ish Blu Advance 4.0L (model A010U), because the most recent OTA update unforgivingly bricked mine. Now I want to try to re-flash the stock ROM, but I am also open to custom ROMs, if there are any available. Please help me out! Thanks in advance
I am really surprised no one has replied yet, but again I am facing the same problem and I've been searching the Internet for one month now and I found absolutely nothing for this phone (specifically for version A010U).
So I am going to post a different question in the hopes that someone will read it and help us out:
I have two Blu Advance 4.0 L A010U phones, which are identical except for the color (white and green). They were manufactured a month apart one in 10/2015 and one in 9/2015.
Unfortunately after only a couple of months of light use and for no apparent reason (did not drop it, or wet it, etc) it started going through a boot loop. It will start, show the "bold like us" logo then restart again without making it to the operating system at all. Like I said I've been looking for over a month to find a ROM (stock or modded) to reflash but with no luck. Then I had an idea. Since I have the other identical phone that's working fine, is there a trick I can do using the working phone to create a ROM that I can use in my broken one. By the way, the non working phone will allow me to get into the recovery menu, but unfortunately nothing happens if I wipe the cache or even if I reset to factory defaults.
Anyone knows what's causing that "boot loop", how to fix it and where to find a ROM or even "extract" or "create" one using a working Advance 4.0 L ???
Thank you very much!
Man I wish I knew. I'm kinda a novice. I have the same phone with a similar problem... I downloaded the recent ota update and the first time it said it couldn't unzip it. I tried again and it seemed to work but when it rebooted into recovery it said there was an error... So it won't boot up, it just goes to the screen that says "no command". I'm pretty sure the there's a way to make a copy of the working ROM but since I don't use a PC for anything I've never taken the time to learn the method.
Deuler93 said:
Hey guys,
I really need to find at least the stock ROM for the new-ish Blu Advance 4.0L (model A010U), because the most recent OTA update unforgivingly bricked mine. Now I want to try to re-flash the stock ROM, but I am also open to custom ROMs, if there are any available. Please help me out! Thanks in advance
Click to expand...
Click to collapse
I just got ahold of a couple of these devices myself and am in the process of going through all the in's and out's of them....I'm a Samsung nerd so I haven't messed with something like these in a while but I got one (that was supposedly dead bricked per the lady friend of mine I got them from) at least able to boot into factory mode and recovery via ADB and just as I'm posting this I'm in adb shell going through the device's internal memory.....so we'll see what all I find and can pull out of this one and possibly know enough to post an intelligible reply with solutions next time
The boot looping sounds like a common problem with these and when I get to that point I'm going to get rid of the stock bootanimation.zip ASAP and try something else. I get the idea that these things aren't exactly power houses built for much so the littlest thing or small bug in their coding could lead to this kind of crap happening.
Hopefully you figure yours out before I toss these out the window! lol
Cheers y salud!
---------- Post added at 02:27 AM ---------- Previous post was at 02:20 AM ----------
good.m. said:
Man I wish I knew. I'm kinda a novice. I have the same phone with a similar problem... I downloaded the recent ota update and the first time it said it couldn't unzip it. I tried again and it seemed to work but when it rebooted into recovery it said there was an error... So it won't boot up, it just goes to the screen that says "no command". I'm pretty sure the there's a way to make a copy of the working ROM but since I don't use a PC for anything I've never taken the time to learn the method.
Click to expand...
Click to collapse
Forgot to add a couple things about your post, sorry! I beleive (and I just started digging into this phone) that the no command part is the locked bootloader these phones appear to have. I think it was a combo of holding both volume buttons down from a powered off state then pressing power button on that came up with the option for factory mode or recovery (which led to the sad 'no command' droid), i went into factory mode and theres an option for Tp Upgrade which Im assuming is F/W or something similar but I just hooked up to the PC and in that mode it's reading the internal and external memory of the phone and that's about where I'm at so far.
Wow! I'm surprised this thread is still going.
Anywho, I found a repository that is storing the default ROM for the 4.0L. The files were just added recently. I would have liked to have seen a custom Lollipop ROM made by now, but this device is far too irrelevant to get any attention, unfortunately. Just root and forget, I guess.
I can't wait to try it, thank you! And btw, were you able to get root successfully and if so, how?
Deuler93 said:
Wow! I'm surprised this thread is still going.
Anywho, I found a repository that is storing the default ROM for the 4.0L. The files were just added recently. I would have liked to have seen a custom Lollipop ROM made by now, but this device is far too irrelevant to get any attention, unfortunately. Just root and forget, I guess.
Click to expand...
Click to collapse
Hey Deuler93 -
You have my respect for digging out that BLU ROMs link and sharing with the rest of us. I downloaded the one for my Advance and used SP flash tool to flash the phone that was stuck on a boot-loop. Of course first I had to download and install the MediaTeK drivers for USB connectivity with my PC. Everything worked flawlessly, no glitches what so ever. All these links are easily found and widely available online if anyone is interested I can share here too. I just hope that this boot-loop was due to some software glitch and not hardware failure. Everything seems to work fine for now, keepint my fingers crossed it will NOT happen again.
Well, one less headache to worry about. By the way we're not that far, if you're ever in the Chicago area, I owe you a beer or something. Thank you!
Hi guys !
Thank you very much for the Advance 4.0L Roms.
I have successfuly recovered my phone, but the IMEI got lost.
So, I need to root it in order to recover the IMEI, but I just can´t get success on any method :
Kingroot
Framaroot
Towelroot
is there another way to root it ?
Thank you very much.
I got temporary root using the kingroot apk. But it messed things up and I don't trust it anymore. None of the other mentioned methods worked for me either, maybe try the PC kingroot method
well this helps one thing
good.m. said:
Man I wish I knew. I'm kinda a novice. I have the same phone with a similar problem... I downloaded the recent ota update and the first time it said it couldn't unzip it. I tried again and it seemed to work but when it rebooted into recovery it said there was an error... So it won't boot up, it just goes to the screen that says "no command". I'm pretty sure the there's a way to make a copy of the working ROM but since I don't use a PC for anything I've never taken the time to learn the method.
Click to expand...
Click to collapse
umm. . . when the no command option comes up just press the power button and the rest of options will appear. doesnt exactly solve your problem however unless you have the ZIP file to install, which is what I'm looking for.
What might happen if a ROM is used for another blu phone. ??
A similar phone as well.
Plz advise.
Damn! This thread just keeps going!
I haven't even looked here in a while, so I will bunch my commentary here. I'm also salaried now, so I bought into a OnePlus X (onyx), a more expensive cheapo device, so I do not use the 4.0L anymore.
As for rooting tools, I used the Kingroot APK successfully in the stock environment. I never tried flashing something SuperSU myself, but it could work. Is flashing a SU app possible from the fastboot interface?
And to Steve's question - it is technically possible to flash a ROM for a different device onto your own device, but is considered a bad idea due to the possibility of introducing incompatibilities and missing proprietary requirements. I feel like this would hold especially true to stock ROMs because the manufacturer probably has no interest in supporting anything more than the device that they are manufacturing for. Doing so removes many possible "compatibility" issues from even having to be considered, but I digress. In short, try to find a ROM made for your device and your device only.
Did you find the zip file for the recovery
Marya Wynter said:
umm. . . when the no command option comes up just press the power button and the rest of options will appear. doesnt exactly solve your problem however unless you have the ZIP file to install, which is what I'm looking for.
Click to expand...
Click to collapse
i root my blu advance 4.0l a010u with the kingoroot PC apk, but i got some issues with the lock screen and some apps, so, i need some advice..
i was looking for a zip to use it via recovery but i can't find any..
Recover IMEI
srspinho said:
Hi guys !
Thank you very much for the Advance 4.0L Roms.
I have successfuly recovered my phone, but the IMEI got lost.
So, I need to root it in order to recover the IMEI, but I just can´t get success on any method :
Kingroot
Framaroot
Towelroot
is there another way to root it ?
Thank you very much.
Click to expand...
Click to collapse
You dont need root to recover imei all you have to do is type *#*#84666364#*#* in your dialer and you will be entered in EngineerMode then go into connectivity ,CDS information and radio information phone 1 or 2 then you will see AT+ type something eg.A then backspace and select the first thing you see. Put a space after AT+ and then put you imei code here "IMEI" between these "" You can find your imei by removing your battery it willl be there. After sending command reboot and imei is back.
links are down....check this instead
Hey guys, links here seems to be down .
Maybe this link would be useful for you all... stock firmware can be downloaded and useful help on videos is available too... Enjoy