I know the Car Dock comes with an insert for the phone if you do, or don't have a case on it. Confirmed today that the laptop dock does too. I assume that all the docks have this, but haven't seen an entertainment dock or standard dock. If anyone can confirm with pics, it would be greatly appreciated. Here's the laptop dock one in pics attached to this post.
link12245 said:
I know the Car Dock comes with an insert for the phone if you do, or don't have a case on it. Confirmed today that the laptop dock does too. I assume that all the docks have this, but haven't seen an entertainment dock or standard dock. If anyone can confirm with pics, it would be greatly appreciated. Here's the laptop dock one in pics attached to this post.
Click to expand...
Click to collapse
I don't have pics but the Multimedia dock and Standard dock are the same way
I've got the MM dock and the car dock, and have played with the charging and LT docks in store. All have the little panel that pops out. The speck sorta works with the MM, charging, and LT docks, but not at all with the car dock. I now have the feather, which works with all 4.
I have the BodyGlove case from AT&T, and it works great on the laptop and car dock.
Son of a mother f*cking b*tch!!!!!! I already sent back my standard dock!!!!!!!!!
I have a Otterbox Commuter case, do you think that it would fit with the insert removed? The micro plug was really close to getting there, just couldn't make it work.
I know that even with my thin Body Glove case, the phone wouldn't even think of fitting in the laptop, but with the insert out, fits with ease. Could work fine, but I haven't dealt with the Commuter case yet.
link12245 said:
I know that even with my thin Body Glove case, the phone wouldn't even think of fitting in the laptop, but with the insert out, fits with ease. Could work fine, but I haven't dealt with the Commuter case yet.
Click to expand...
Click to collapse
*hitting head on desk*
I hate you... thanks for the info. guess I might re-order and give it a try.
*light bulb above head*
Wait a minute... I'll run down to the local AT&T store, they always have the Atrix in the Multimedia dock (same dimensions as the standard dock). I'll pop out the insert there and see if my case will fit.
Swiftks said:
*hitting head on desk*
I hate you... thanks for the info. guess I might re-order and give it a try.
*light bulb above head*
Wait a minute... I'll run down to the local AT&T store, they always have the Atrix in the Multimedia dock (same dimensions as the standard dock). I'll pop out the insert there and see if my case will fit.
Click to expand...
Click to collapse
Yep, my store didn't get the multimedia dock, just the laptop dock. We haven't recieved the otterbox defender in either, only seen them online. Best of luck, let us know what you find.
Well, no dice with the otterbox commuter case... I went to the local AT&T store, took the insert out of the standard dock, and the micro adapter still wouldn't reach. You should have seen the look on the dumb ass sales persons face... haha priceless.
I'm also assuming the otterbox defender case will not work either, as it is larger than the commuter case. Thanks anyway, still good info. to know.
Well I hope I'm not a thread-killer as I posted this several days ago in another thread and never had any comments on it...
I searched around on many forums but found no discussions about the "larger case" insert documented in the manual, at least for the Multimedia dock.
It's listed in the manual as part number SJYN0722A. The manual indicates that it is included when purchasing the dock and is for use with a "ruggedized" case. This is also referenced at Motorola's FAQ on accessories for use with a "2 shot battery door fit plate", whatever that is/was.
The insert that is being removed is part number SJYN0723A.
Anyone have this 22A insert or know anything about it? Was it discontinued before the docks were even released?
I have the Incipio Feather case and have removed the insert as discussed to use it in the Multimedia dock. It works, but does not physically support the phone at all as others have mentioned.
Thanks!
flexpackman said:
Well I hope I'm not a thread-killer as I posted this several days ago in another thread and never had any comments on it...
I searched around on many forums but found no discussions about the "larger case" insert documented in the manual, at least for the Multimedia dock.
It's listed in the manual as part number SJYN0722A. The manual indicates that it is included when purchasing the dock and is for use with a "ruggedized" case. This is also referenced at Motorola's FAQ on accessories for use with a "2 shot battery door fit plate", whatever that is/was.
The insert that is being removed is part number SJYN0723A.
Anyone have this 22A insert or know anything about it? Was it discontinued before the docks were even released?
I have the Incipio Feather case and have removed the insert as discussed to use it in the Multimedia dock. It works, but does not physically support the phone at all as others have mentioned.
Thanks!
Click to expand...
Click to collapse
Not killing the thread at all, more info is always welcome. I would assume that the other part number is just the dock connector with no insert on it.
Sorry to double post if you already put this up, hadn't seen anything and it was cool to find out.
Thanks link12245
The manual specifically speaks to two inserts. One for just the phone and one for "over-sized" cases.
I guess that it never made it to production and Motorola didn't change the manuals....
motorola forgot to add the plate
i spoke to motorola support @ 800-734-5870, they acknowledged that the plate (part #: SJYN0722A) should have been included. they will refund the full amount for the dock & advised me to repurchase it online. the newer docks now includes this part.
atrixhack said:
i spoke to Motorola support @ 800-734-5870, they acknowledged that the plate (part #: SJYN0722A) should have been included. they will refund the full amount for the dock & advised me to repurchase it on-line. the newer docks now includes this part.
Click to expand...
Click to collapse
Thanks!
I was going to call support, but thought I would ask around first.
I purchased this from Amazon and got it last week. I'll see if they have new stock for a return and/or give Motorola a call to see if I can find out who has fresh stock that has the insert.
Related
has anyone purchased a decent car mount for the vibrant? I'm all over the web looking for one that I certainly wouldn't regret in buying. So, please post links, opinions, and maybe pics. thank you
I do not have it yet, but i saw this get posted several times with some good reviews http://www.dealextreme.com/details.dx/sku.37823
The Verizon Fascinate is coming out this week and the press release says there will be a mount. I'm going to take my phone by a Verizon store and see if they have one they'll open and let me check fit.
Car Dock – Attachable to the windshield or dashboard, the car dock displays turn-by-turn GPS navigation instructions, rotates freely between landscape and portrait modes, and features a preloaded Samsung “Car Home” application, giving customers access to everything the “Desk Home” app can do while on the go. The car dock is available for $39.99.
Click to expand...
Click to collapse
http://www.androidguys.com/2010/09/07/official-verizon-drops-samsung-fascinate-days-sept-9/
Due to the similar size and shape, I'm betting most generic ipod touch/iphone mounts out there will fit. Planning on checking walmarts offerings and maybe bestbuy sometime this week.
I just bought this:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150481766101&ssPageName=STRK:MEWNX:IT
I think its great if you're not using a case, snaps right it and doesn't move, and the mount seems nice and firm. The holes for the speakerphone and camera are all in the right places so its good to go.
Only complaint i have is the top snap portion is a little long and gets caught in the seam between the front and back cover if you're not careful. I snipped a tiny bit off the end of it to blunt the end a little bit, and am careful to pull the snap back when i slide the phone in, and its nice.
There are is a thread in here as well and/or the i9000 accessories forum that discusses a few options if you are using a case.
Xidroid said:
The Verizon Fascinate is coming out this week and the press release says there will be a mount. I'm going to take my phone by a Verizon store and see if they have one they'll open and let me check fit.[/url]
Click to expand...
Click to collapse
And on that note, i called my corp Verizon rep and ordered one - free overnight shipping. Part# is "SAMI500MNT"
SHould be here tomorrow @ 3:30'ish, that's when Mr. Fedex shows up.
I'll post details and pics if it's legit and ends up workin on the Vibrant.
(had to edit quote as i'm too new to post links)
Much to my dismay, not only is the micro-USB connector lower on the Fascinate than on the Vibrant, rendering the dock useless unless you remove the Vibrant's battery cover & insert at an angle, but the phone doesn't seem to recognize the usb connection. Although it does give you the audible signal that it's been plugged in - the charging indicator disappears immediately and audio is not passed through the 3.5mm jack at the back of the dock.
The overall design of the car dock is very nice and I can only hope TMO will bring something along these lines for the Vibrant.
Here are some pics of the car dock for the Fascinate, for those who happened to be curious.
LabattZ said:
Much to my dismay, not only is the micro-USB connector lower on the Fascinate than on the Vibrant, rendering the dock useless unless you remove the Vibrant's battery cover & insert at an angle, but the phone doesn't seem to recognize the usb connection. Although it does give you the audible signal that it's been plugged in - the charging indicator disappears immediately and audio is not passed through the 3.5mm jack at the back of the dock.
The overall design of the car dock is very nice and I can only hope TMO will bring something along these lines for the Vibrant.
Click to expand...
Click to collapse
That's too bad, it looked promising. Thanks for jumping on it and trying for us.
Since the Galaxy is light in weight and came with 2 back covers, I did a DIY with velcro. I lined it up to my center dash (horizontally), hooked up the AUX and charger and BAM...only 5 bucks! I now have Google NAV/traffic and .MP4s at my finger tips.
DaSmittyman said:
I do not have it yet, but i saw this get posted several times with some good reviews http://www.dealextreme.com/details.dx/sku.37823
Click to expand...
Click to collapse
I just ordered this one. I'll let everyone know how well it performs when it arrives.
I got this Arkon car mount.
http://www.amazon.com/Arkon-IPM515-...L68S/ref=sr_1_2?ie=UTF8&qid=1287158680&sr=8-2
It says its for iPhone, but works just as well with most phones out there.
I have this mount:
http://www.amazon.com/Arkon-Univers...U3GA/ref=sr_1_5?ie=UTF8&qid=1287178030&sr=8-5
Works great and holds the phone firmly.
The clingo mounts look awesome and have tons.of good reviews.
Texted While Driving
DKYang said:
I got this Arkon car mount.
http://www.amazon.com/Arkon-IPM515-...L68S/ref=sr_1_2?ie=UTF8&qid=1287158680&sr=8-2
It says its for iPhone, but works just as well with most phones out there.
Click to expand...
Click to collapse
Just got this mount today and well.......it's a very tight fit. This is perfect for anything smaller than the Vibrant size, otherwise it's a tight fit or won't fit at all. I won't recommend it if you need a mount where you can move the phone in and out of the mount quickly, otherwise, it should do well.
I use this one:
http://www.meritline.com/car-holder...-windshield-with-suction-mount---p-54018.aspx
With my Vibrant. Works great. You've got to be careful with the clip though to make sure you don't release it too soon it it'll snag between the battery cover and phone.
Overall very nice & doesn't obscure the phone at all & the phone can rotate 360 degrees with almost no effort (though it hasn't happened accidentally or when I've hit a bump or anything).
Anyone ever heard of proclipusa.com? They are a bit expensive but I had it for my iPhone in my 06 acura TL and it was awesome! Haven't ordered for the vibrant yet but am going to soon.
Sent from my SGH-T959 using XDA App
tekkguy said:
I have this mount:
http://www.amazon.com/Arkon-Univers...U3GA/ref=sr_1_5?ie=UTF8&qid=1287178030&sr=8-5
Works great and holds the phone firmly.
Click to expand...
Click to collapse
I got that too and it works pretty well. I've got an Xterra and it has a bumpy ride =\
~SB
Edit: I only use the vent not the windshield mount...
Xidroid said:
That's too bad, it looked promising. Thanks for jumping on it and trying for us.
Click to expand...
Click to collapse
Official dock is now available... the cheapest I could find it was at Newegg for $35. Part #ECS-M979BEGSTA, I think (but some stores use this same part number for the Fascinate dock).
tjhart85 said:
I use this one:
http://www.meritline.com/car-holder...-windshield-with-suction-mount---p-54018.aspx
With my Vibrant. Works great. You've got to be careful with the clip though to make sure you don't release it too soon it it'll snag between the battery cover and phone.
Overall very nice & doesn't obscure the phone at all & the phone can rotate 360 degrees with almost no effort (though it hasn't happened accidentally or when I've hit a bump or anything).
Click to expand...
Click to collapse
i have this one also and love it. tight fit and no matter how bumpy the road or water is (yes i use it on the boat) it stays exactly where you put it. on problem is you have to take it out of the case...
So it's time to find a car mount for the SGS2.
For the HD2 I used an air vent mount (this). I don't like the windscreen suction mounts (just my preference, even though they tend to be more flexible in terms of positioning the device), and the positioning of the air vent mount is almost perfect in my car. The only thing that is a little annoying is that the fixed one obviously don't allow any turning at all, which can be annoying when it's sunny as I'd prefer to have the screen point more directly at me.
Therefore I'm looking for an air vent mount that has some sort of swivel included - basically something similar to this for, or perhaps something more generic like this or this.
Has anyone used any of these (or the windscreen suction mount equivalents) from either Ultimate Addons or Arkon? How well made and durable are they? How well do they hold their position?
Are there other ones I've missed that I should consider?
Thanks in advance for any input!
I'm looking for the same thing, preferably specific to the S2 (much better to slip it into a custom holder, rather than placing it in a generic one then tighten the grips etc).
Something like this (no link allowed.. see gripmount on mobilefun) on the air vent would be great.
I also like vent holders! I just buy a cheap generic one and modify it to fit my needs.
Obviously this involves taking apart my vent and drilling holes in the phone holder, put you get just the thing you need! Plus its also wayyyy more stable as you use cable ties to get it solidly in place.
The mounts that usually come with the vent holder are flimsy and usually end up falling off!
The gripmount on mobilefun looks great, but I can't see how it manages to fit the SGS2 both with and without a case! I'm using a silicone skin with mine and would rather have something that will work without me having to take it on and off. Is the mount slightly bendy so the phone just clips in? Anyone got any experience of these?
I've decided to just hold fire until the official Samsung mount comes out - it looks pretty good on their website and I can order the desktop dock at the same time.
Breffo multi-fuctional Car-dock/Cradle
I saw this product last year and thought this might be interesting?! My apologies for not yet have those for review, didn't need it yet. But when i have a car this i would definitely buy.
The brand is Breffo and the product is Spiderpodium, there website is www.breffo.com
Interesting idea . . . on fleabay for £13 (item 200603319280)
Might pick one up and see how it works as a vent holder . . .
Edit: The reviews are great, so ordered a black one off ebay. There are white ones for just £8 on Amazon if you're not fussed about colour! Will return and let y'all know how well it works . . .
Spiderpodium looks superb, definitely getting one of those. One of the ebay sellers is only around the corner from me, so I've contacted to ask if I can collect. Will report back once I've got hold of one.
I've made my own:
robbiekhan that looks awesome, good work. How much would you charge to make more had to ask lol
It's simple case (hah!!) of sticking and cutting a few bits together really so i couldn't charge to do such a thing as you'd be much better off doing it lol, plus it's fun, something you've made and it can be a conversation piece
My HTC Desire mount DIY article can be found on LifeHacker, method is exactly the same, just omit anything Desire for Galaxy S II
http://lifehacker.com/5593245/build-a-custom-phone-car-mount-for-under-10
Looks so cool! What case did you use - the one from ebay you mentioned in the other tread?
Just bought this: http://www.dealextreme.com/p/car-windshield-mini-holder-swivel-mount-for-cell-phone-5-0-7-5cm-41529
It's just under 4€ :O So you can't go wrong whit it.
http://youtu.be/ZR5oWIzW_Ns
EDIT: Also this might be interesting too: Mini Car Cigarette Powered 1000mA USB Adapter/Charger
Yup same case!
Yufina said:
Just bought this: http://www.dealextreme.com/p/car-windshield-mini-holder-swivel-mount-for-cell-phone-5-0-7-5cm-41529
It's just under 4€ :O So you can't go wrong whit it.
http://youtu.be/ZR5oWIzW_Ns
EDIT: Also this might be interesting too: Mini Car Cigarette Powered 1000mA USB Adapter/Charger
Click to expand...
Click to collapse
That looks very good actually! Going to buy! If anything it means I don't need to take my phone out of the case
I'm going to pick up a Griffin Windowseat I think, as I need something compatible with other phones too.
I have got one one the magic mounts (aka Dash Genie), but due to the textured back the SGS2 doesn't stick
If you wanted universal vent mount, have a look at this by Herbert Richter. If you however want a device specific, and if you want a small project, than I see that Brodit holder for Samsung Galaxy S II seems to be listed, you can covert this into a vent mount or windscreen suction mount using this adaptor plate.
Nice - thanks. For now I decided to take a punt on the £8 white Spiderpodium for its uniqueness - when it arrives I'll see how well made and durable it is, and if that doesn't work out I think a custom/self-made solution might well be the way to go.
Yufina said:
Just bought this: http://www.dealextreme.com/p/car-windshield-mini-holder-swivel-mount-for-cell-phone-5-0-7-5cm-41529
It's just under 4€ :O So you can't go wrong whit it.
http://youtu.be/ZR5oWIzW_Ns
Click to expand...
Click to collapse
Looks good and cheap enough!
Mine arrived this morning, check out a quick review and a couple of pics here
Summary: great! Will probably get another one, in fact
robbiekhan said:
I've made my own:
Click to expand...
Click to collapse
Looks very good!
Let's see if I can make one myself
Yufina said:
Just bought this: http://www.dealextreme.com/p/car-windshield-mini-holder-swivel-mount-for-cell-phone-5-0-7-5cm-41529
It's just under 4€ :O So you can't go wrong whit it.
http://youtu.be/ZR5oWIzW_Ns
EDIT: Also this might be interesting too: Mini Car Cigarette Powered 1000mA USB Adapter/Charger
Click to expand...
Click to collapse
I wonder if this will work if you attatch it to the windshield...
On the left of the SGS2 there are the volume buttons. And the miniholder, is really, ehhhh, mini... So I think the phone will hit the window, or if you place it in the holder in a way the phone does not hit the window the volume buttons will be pressed all the time...
Been looking for a desktop dock for a while. Only one I could find was a generic micro usb dock. Anyone know of a specific ET4G dock?
The Official One from Samsung...
can't post the link, but if you go to Samsung.com and find the links for phones/sprint/E4GT/Accessories, you will see it.
Oh it's the same dock I saw but from a generic distro. These docks never account for additional space for a case. Since I never take my phone out of my case, it prob won't fit.
I completely agree with you about the docks leaving no space for a case. That's my concern as well. What about the docks by Sinjimoru Sync? I didn't know they existed until GooseChaser posted it in the other thread:
http://forum.xda-developers.com/showthread.php?t=1266005
I think the best option for people that use cases is to get a generic micro usb dock from a generic distro. Make sure it's a little bit bigger than your phone. Then use styrofoam or rubberized material with one side stick and adjust the depth for the phone.
http://www.proclipusa.com/default.a...d=&parent_category=4&d_pcat=13451&d_cat=18854
I like these mounts, the page just went up today. It's much better than the crap Verizon is pushing. Anyone else ever use these docks?
I can't tell from the pics but does the one that have the charger block the audio out?
Never mind, I can see the audio jack now in the pics.
i came on to post this...I just got an email from proclip confirming this. Ive used proclip in the past and they are of good quality
http://www.proclipusa.com/default.a...d=&parent_category=4&d_pcat=13451&d_cat=18854
I'm guessing only the adjustable holder will fit our phones if we have cases on them?
bowsersoulstar said:
I'm guessing only the adjustable holder will fit our phones if we have cases on them?
Click to expand...
Click to collapse
Looks like it. I would like the active setup, but I will have a TPU case on it. I wonder if a heat gun can help me bend it out a bit.
Roroco said:
Looks like it. I would like the active setup, but I will have a TPU case on it. I wonder if a heat gun can help me bend it out a bit.
Click to expand...
Click to collapse
I'm looking at the same problem here. I've been using a holder with the 2 amp charger for the past two years with my Incredible and absolutely love it. I've never been able to get an extended battery because of how tight it slides in, though. I'll email them and ask but I might have to just swap in the stock battery for rides I know I'll need the juice.
Pros of using this are great, though. Because it's 2 amp charger I would get ~25% in about 20 minutes of driving with my Incredible with fast charging enabled in the kernel. GPS and Bluetooth for Google Maps would slow the charge down but would still give me a full charge from 20% to full in an hour. With Cyanogen I would set my bluetooth to only turn on when connected to a wall charger so I'd slide this in and my buetooth would turn on and connect to my car automatically. Last but not least, your wires are all tucked away! Very clean look.
Does the mount hold the audio cable so it doesn't move and it plugs into the phone?
Any issues with the diztronic TPU case? Would it prevent the microusb or audio plugs from inserting into the phone completely?
nomisunrider said:
Does the mount hold the audio cable so it doesn't move and it plugs into the phone?
Any issues with the diztronic TPU case? Would it prevent the microusb or audio plugs from inserting into the phone completely?
Click to expand...
Click to collapse
If you get the universal dock, the bottom of the phone is completely exposed so you won't have any issues. I got my wife one of these (universal) for her iPod a few years back and the build quality is top notch.
i wish I didn't have to also plug in the cables separately, but maybe I can jerryrig something up.
Roroco said:
If you get the universal dock, the bottom of the phone is completely exposed so you won't have any issues. I got my wife one of these (universal) for her iPod a few years back and the build quality is top notch.
i wish I didn't have to also plug in the cables separately, but maybe I can jerryrig something up.
Click to expand...
Click to collapse
Yah, that's I'm trying to avoid. Taking off my case every time I get in the car would be a big hassle.
nomisunrider said:
Yah, that's I'm trying to avoid. Taking off my case every time I get in the car would be a big hassle.
Click to expand...
Click to collapse
If you don't want to remove the case, then you need to get the universal dock. I wish them made a version of the active dock that was slightly adjustable, but they don't.
My question is would the charging holder accommodate the extended battery given that it barely adds any thickness to the device. From the looks of the pictures, it looks like the device slides in and is held on to the sides only so it looks like shouldn't be a problem.
I contacted customer service and they said this:
Indeed the added battery won't make it work in 512324. Our adjustable holder listed with the Galaxy Nexus listing might work. Our custom holders are made for the device as it comes out of the box, and indeed any added thickness will make it not work in our custom holders.
Click to expand...
Click to collapse
So I guess not?
Roroco said:
If you don't want to remove the case, then you need to get the universal dock. I wish them made a version of the active dock that was slightly adjustable, but they don't.
Click to expand...
Click to collapse
Which I don't want. I want one with the charger, that can accomodate a case.
They make such a thing for the iphone. My co-worker has one.
http://www.proclipusa.com/brodit-de...and-pass-through-connector--516165-18357.aspx
I emailed them asking if they have plans for such a device for the galaxy nexus.
Mooem7 said:
My question is would the charging holder accommodate the extended battery given that it barely adds any thickness to the device. From the looks of the pictures, it looks like the device slides in and is held on to the sides only so it looks like shouldn't be a problem.
I contacted customer service and they said this:
So I guess not?
Click to expand...
Click to collapse
Most extended batteries tend to add a lot of bulk (more than cases sometimes). The person who emailed you back may not be aware that the GN's extended battery adds about 1-2 mm of bulk to the bottom half of the phone.
Since the holder is a slide-in type, I can't see this being 'millimeter-tight'. Don't take my word for it but I'm willing to bet that this will fit even with the extended battery on.
I guess we won't know for sure until someone gets the fitted holders and try it though. I'd try, but I've a case so the fitted ones do me no good for sure.
nomisunrider said:
Which I don't want. I want one with the charger, that can accomodate a case.
They make such a thing for the iphone. My co-worker has one.
I emailed them asking if they have plans for such a device for the galaxy nexus.
Click to expand...
Click to collapse
80 bucks for that dock. Ouch. Good concept, but that is a bit rich.
I wish you could buy these at a store. I've already got the whole set for the Nexus One and I've been waiting for the GN mount. I just added to my cart and it's an extra $20 in shipping (to Toronto). So after duty at the border I'm looking easy at $60 just for that one piece of molded plastic. Yeah the mount is great, but that's seriously expensive.
I've used their cases for the last 2 years, nexus s and thunderbolt, and they are great. I still have my Nexus S holder and the picture of the one on their site for the GNex looks like the same style, if so it should work with the extended battery. The slide in case is tight on the sides but leaves a gap behind the phone, see attached pic. The phone slides into that groove and the groove itself is very thin so it doesn't appear it will interfere with the rear battery cover at all.
Proclips is a great solution. I've used it for my car for years. I used them in 3 different cars. Pricey however, it works very well. A+
Got a negative response =(
Unfortunately not. We only have adjustable holder with charging for our Apple line. These have all the same connectors in exact the same location.
For other phones there are too many differences in charging location and thickness of cases.
Best Regards,
Customer Service
ProClip USA, Inc.
nomisunrider said:
Which I don't want. I want one with the charger, that can accomodate a case.
They make such a thing for the iphone. My co-worker has one.
http://www.proclipusa.com/brodit-de...and-pass-through-connector--516165-18357.aspx
I emailed them asking if they have plans for such a device for the galaxy nexus.
Click to expand...
Click to collapse
Hi
For those in the UK... just ordered an active mount from http://www.mountonus.com/
£59.99... bit steep but I guess thats the price you pay for a nice phone-specific/car-specific mount!
nomisunrider said:
Got a negative response =(
Unfortunately not. We only have adjustable holder with charging for our Apple line. These have all the same connectors in exact the same location.
For other phones there are too many differences in charging location and thickness of cases.
Best Regards,
Customer Service
ProClip USA, Inc.
Click to expand...
Click to collapse
It was to be expected. They are not going to design a niche product for a phone until it sells consistently in the millions. That said... Creating a Micro USB small swing arm to make it universal should be too hard....
If I feel industrial, I might see what I can make on my own.
I'd prefer something windshield mounted. If I'm not getting the 3-pin version, I don't see why I should have to remove my case for the car dock, so I'd like one of those generic car mounts.
I have no experience with them though. What's the best one? Any recommendations?
check out Ram Mounts. google it
They are the most sturdy, but can be expensive.
i use the X mount one with my gnex and its awesome.
FYI I saw someone mention using the standard Garmin nuvi suction cup mount, with a GN in a case it does seem to fit.
Sent from my Galaxy Nexus using XDA App
i have the european dock (3 pins present) and very firm. Little tight but other than that holds it very well
Javillanueva67 said:
i have the european dock (3 pins present) and very firm. Little tight but other than that holds it very well
Click to expand...
Click to collapse
This thread is about the verizon nexus. You say you have the european samsung dock with the pogo pins and the verizon phone fits in it?
If so, do the pins line up and work to put in in car mode?
I ordered the VZW/LTE specific version of the car dock from mycellworld.com. its supposedly legit in that it has the 3 pins and is definitely for the LTE handset. its on back order, supposed to ship next week. will review as soon as it shows up.
Sent from my Galaxy Nexus using Tapatalk
p.s. I have the extended OEM battery and I also have the generic car dock (no 3 pins) and it fits no problem.
Sent from my Galaxy Nexus using Tapatalk
I know you said you prefer windshield mounted but I just bought the Tetrax FIXWAY mount and I love it. There is a large thread on it with lots of pics/videos. That thread is one of the reasons I bought it.
I too was looking for a car mount to be used with a case and an extended battery. I was just going to use a generic one off of amazon that was like a clamp style. Even though the Tetrax doesn't suction cup to the windshield, I think it is worth you looking at if you haven't already.
I mounted mine onto my dash and think it works perfectly. It doesn't obstruct my view at all and its is just a quick glance down to check navigation/music.
The phone is really quick to just 'snap' it in place. The only downside to me is that you have to manually plug in the power and aux cords but I don't even see this as a true downside since you will have to do this with any generic mount you would need in order to keep the case on.
If you are interested and would like me to take any additional pictures for you just let me know and I would be happy to do what I can
ProClip adjustable width mount is what I'd recommend
bpowder1966 said:
check out Ram Mounts. google it
They are the most sturdy, but can be expensive.
i use the X mount one with my gnex and its awesome.
Click to expand...
Click to collapse
I ordered the X-grip mount with a medium size arm and the adhesive rubber ball base(I plan on keeping my car until its run into the ground) on January 11th.
Soon after ordering they informed me that the base wasn't in stock but it would ship out in 1-2 weeks. 2 weeks past with no word, then he said it would ship out at the end of the week. Still no shipping
I figured CS people would know not to give unrealistic ETA dates(especially when ram-mount makes the damn things themselves), especially over and over again, stringing the customer along...
rickt said:
I ordered the VZW/LTE specific version of the car dock from mycellworld.com. its supposedly legit in that it has the 3 pins and is definitely for the LTE handset. its on back order, supposed to ship next week. will review as soon as it shows up.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Let us know when you get it because I read a lot on the thread about the 3-pin that some people got burned by claims of the docks having 3 pin connection when they actually didn't. Keep us updated!
bpowder1966 said:
check out Ram Mounts. google it
They are the most sturdy, but can be expensive.
i use the X mount one with my gnex and its awesome.
Click to expand...
Click to collapse
Can it swivel to horizontal mode? Currently, this one seems to be the best.
jcwarren217 said:
I know you said you prefer windshield mounted but I just bought the Tetrax FIXWAY mount and I love it. There is a large thread on it with lots of pics/videos. That thread is one of the reasons I bought it.
I too was looking for a car mount to be used with a case and an extended battery. I was just going to use a generic one off of amazon that was like a clamp style. Even though the Tetrax doesn't suction cup to the windshield, I think it is worth you looking at if you haven't already.
I mounted mine onto my dash and think it works perfectly. It doesn't obstruct my view at all and its is just a quick glance down to check navigation/music.
The phone is really quick to just 'snap' it in place. The only downside to me is that you have to manually plug in the power and aux cords but I don't even see this as a true downside since you will have to do this with any generic mount you would need in order to keep the case on.
If you are interested and would like me to take any additional pictures for you just let me know and I would be happy to do what I can
Click to expand...
Click to collapse
I'm really tempted. Both options above are expensive. I was worried that the attachment thing might look like ****, but from the pictures in that thread, it doesn't look too bad. Same question though, can I turn it to landscape for Navigation? Also, how sturdy is the connection? Will it fall off as my car hits a bump or something?
acr89 said:
ProClip adjustable width mount is what I'd recommend
Click to expand...
Click to collapse
+1 to ProClip! They have a mount that can adjust with different cases, and it's very sturdy. The one I have mounts to my vent though (I prefer this anyway since my windshield is so...sloped). They are kinda pricey also, but they don't look too bulky and are specifically made for your car model. I love mine.
Would like to bump this thread to see if anyone else had suggestions for good universal car mounts/docks that will work with a GNEX in a case.
Samcobra said:
I'd prefer something windshield mounted. If I'm not getting the 3-pin version, I don't see why I should have to remove my case for the car dock, so I'd like one of those generic car mounts.
I have no experience with them though. What's the best one? Any recommendations?
Click to expand...
Click to collapse
try the iBolt pro dock alumina... this car dock works with just about any phone, and especially works great with the galaxy nexus.... this cardock allows you to place it on either the windshield, dashboard, or air vent since extra pins are supplied to place the dock there and theres no need to remove your case from your phone... which is a god send.. it only cost me about $35 on amazon, so i cant argue with the price... i have excellent photos of it, that i'll share as soon as i reach the 10 post mark, that allows me to attach files and externals link...
SNNTEC said:
i have excellent photos of it, that i'll share as soon as i reach the 10 post mark, that allows me to attach files and externals link...
Click to expand...
Click to collapse
You're past 10 posts, pics please!