Im still trying to figure out whats going on with my TP2. all the stuff ive read says turn auto light adjust off. done. could be a hardware problem with the light sensor.. not sure it worked day before yesterday. task 29 and flashed two different rom. flashed htc's newest radio Radio_Rhodium_3.44.25.27 and Energy.RHODIUM.29017.Sense2.5.Cookie.2.0.Mar.21 (which the my location and weather isnt working for me) still the same problem with the screen not waking up. went through the reg and found the proximinty senors light control made sure they were set to 0. i havent tried holding it up to a bright light yet.. but after it sleeps or a call comes in and when going to end the call you can barley make out the end call and keypad buttons if im out side. Please someone help me with this or maybe someone can at least tell me whats wrong.. ive been up all night and day reading trying to fix this. how could the light sensor go out all the sudden? but before the screen sleeps it works fine.. im confused
Reseat your stylus.
I had the same prob come up. I had the auto brightness 'on' since I had this rom. I turned it 'off' and set the brightness to 30%. Then the problem started happening. I turned the auto back 'on'. Didn't work. Turned auto 'off' and set bright to 100%. Didn't work. Turned auto back 'on'. Started pressing sleep button repeatedly while slipping out the stylus.
All the steps were done with soft resetting the phone following the auto 'on'/'off'.
Found this out by accident.
Same rom as you too.
I have to slip out the stylus to get it back on somethimes
I am having the same problem! I was hoping for a registry fix.. The only thing I can do to get my screen back once its off is to pull the battery.. thats a pain in butt!
I have done a factory reset, the stylus thing and nothing works so far.
Please Help us if anyone has the answer or a registry tweak for us!
Thanks
1.If you slide your screen up, does it come on?
2.If you slowly slide your screen up while repeatedly pressing the power button, does it come on?
Mine just started having this same problem too. ^#2 works for me.
Nothing Works
Nothing works for me..
I have to pull the battery and and set the phone to leave the light on all the time..
Then if the phone rings the light goes out, I cant see who is calling and have to pull the battery again..
Sure hope someone knows a registry fix soon.. its driving me nuts!
Nope none of that works. pull out stylus the call keys come on but no screen. slid the keyboard out the keyboard lights come on but no screen... guess im just gonna run andriod untill they get the nand booting fully functional with GSM. to hell with windows.. not only mobile windows has always been crap!
I had the same problem, it was caused by a third party software (last version of FreeOTFE4PDA). Before giving up, try a hard reset and install third party software after a few days.
This problem started back up for me. Guess I'll be flashing again.
Seems like it's a problem with the latest NRG roms. This started happening with the last two and I haven't installed any extra programs.
OK guys, here is a official fix for SoD that I have prepared for ya.
http://forum.xda-developers.com/showthread.php?t=1027388
Still Didnt Work
Thanks so much for trying with that fix.
I have tried your fix twice, hard booted twice.. nothing seems to work on 6.5..
I can boot over to android and the back light comes back on.. its crazy that I cant
get it to wake up in winmo! Please let me know if there is a registry fix that Im not
seeing??
Thanks so much..
Related
Hey guys so my Tilt 2 has been having an issue when I put it to sleep. It goes to sleep fine, but when I wake it up the screen remains black. The actual device turns on, but the screen stays black. I can still make calls, receive calls, play music, etc. but I have to soft reset the device if I want to be able to see what I am doing.
From what I can tell my problem is different from the normal Sleep of Death issue where the device simply won't wake up.
I've searched through the forums looking for solutions and have tried pretty much everything from doing a hard reset, using different roms, formatting the internal memory, etc. Even after doing all of this, my device still suffers from this issue.
Any insight into my problem would be greatly appreciated!
I assume you've tried a simple reset using the reset button or pulling the battery out and putting it back in?
Aaron McCarthy said:
I assume you've tried a simple reset using the reset button or pulling the battery out and putting it back in?
Click to expand...
Click to collapse
Yeah every time I the screen goes black I soft reset it in order to get the screen to turn back on. The problem is that the issue persists through soft resets. I currently can't suspend my device because I can't get the screen to turn back on...
hold down the volume down button and then press the reset button (the physical reset button) this should bring you into your bootscreen the multicoloured screen.. if you can get there then you can flash a new rom on your phone... and thats a whole other ball game. It gets a lot of hype as being hard but its really super easy to do if you just follow the directions.
Tilt 2 dark screen solved
With the tilt 2, if the screen does not wakeup, but you can answer the phone, hear music, etc..., it is a malfunctioning light sensor, maybe hardware, or software related (drivers), but it is fixable. Just eliminate all calls for use of the light sensor.
I had this problem and took quite a while to figure it out, as there are several apps that poll the light sensor that cause problems.
First, go to start/settings/system/power/backlight and uncheck the auto adjust backlight option
Second, go to start/settings/personal/buttons/backlight and uncheck the enable keyboard auto backlight sensor.
Last, open advanced config (need to download and install from touchxperience.com, if you do not have it), tab to light sensor and set light sensor polling to disabled.
Now, my phone works normal and will wake up properly from standby like it should. this all seems hardware dependant, as I have in my family 3 of these things and I dropped and broke mine, so bought a new one (4th in the series) and it had the SOD issues, but could restart with softrest. Took me the better part of the day to find a reliable fix, but now all is well again.
Hope this helps other Tilt 2 and similar issues.
This is the second time on 2 different roms that somehow my phone has been stuck with a black screen and when unlocked the screen stays off. Its a bit hard to explain but pressing power lets the screen to come on for just a second but then it goes off...yet on the black screen you can slide it unlocked (screen stays off) A reboot goes back to the same issue. after many button combos the screen will finally stay lit. The only way I have found to cure it is to uninstall lightflow. (Im really not sure thats what is causing it) If you dont change anything when you lock it your right back into the black screen thing..... Anyone seen this using lightflow or not??
I've had this problem to. I had it when I was using the phone on stock without lightflow, as well as using it with HD revolution and light flow. I have no idea why its doing this though?
I had this problem when I used the app "Wave Launcher". I found the most effective way to keep the screen on is to call the phone, stay in the call, and uninstall the app..
Danny80y said:
This is the second time on 2 different roms that somehow my phone has been stuck with a black screen and when unlocked the screen stays off. Its a bit hard to explain but pressing power lets the screen to come on for just a second but then it goes off...yet on the black screen you can slide it unlocked (screen stays off) A reboot goes back to the same issue. after many button combos the screen will finally stay lit. The only way I have found to cure it is to uninstall lightflow. (Im really not sure thats what is causing it) If you dont change anything when you lock it your right back into the black screen thing..... Anyone seen this using lightflow or not??
Click to expand...
Click to collapse
Are you running the 350 mhz idle mod or UVing? Seems like your phone isn't getting enough juice.
I emailed the dev's a few days ago. They came back with the response to uncheck "s6e8aa0 control", which I believe is disabling access to the main screen. I haven't seen the sleep of death since. He also said to look for a future update which removes this option.
Hope that this was a helpful first post!
ClAlpha said:
I emailed the dev's a few days ago. They came back with the response to uncheck "s6e8aa0 control", which I believe is disabling access to the main screen. I haven't seen the sleep of death since. He also said to look for a future update which removes this option.
Hope that this was a helpful first post!
Click to expand...
Click to collapse
I have the same problem today! When light flow is active the screen goes on for a second and then stays black.
Sadly I can't find "s6e8aa0 control" in the newest version. Can anyone help?
Got it working. I should use the correct settings^^
But the program is not working how I would like it :/
I've got a problem with a OneX I'm trialling for work.
This is a stock device with the latest OTA update applied. I installed Good for Enterprise, activated it, and got my work emails. I opened a PDF attachment which opened for a couple of seconds then the display glitched.
The attached images show what I mean. The display is glitched for every screen. Soft resetting the phone was okay until it started again a couple of minutes later.
Soft resetting a 2nd time was where my real problems started. The phone vibrated as it started, but the display stayed dark. If I tap the power, the touch buttons light up. If I go through the motions of the lock ring and my gesture lock, I feel vibrations of my actions but can't see a thing. If I ring the phone, it rings, the touch buttons light up and the LED blinks. The display stays dark at all times.
Does anyone have any idea what's going on here? It's almost like when a graphic card overheats in a PC.
I would try a hard reset, see what that does, it should fix it as it looks like software problem
Squeeze your phone between thumb and forefinger (on the screen and rear cover) about 1.5-2cm in from the USB port, and slightly below. Let us know if the screen comes back on.
ZenithUK said:
I've got a problem with a OneX I'm trialling for work.
Click to expand...
Click to collapse
I think your phone is on drugs.
Seriously though, that's the scariest gfx bug I've seen on a phone.
Work were just as surprised as everyone else.
It's been sent back to them so they can talk with Vodafone about just what's happened with it.
In the few days I had it, it's a decent phone. The primary reason for considering the OneX is the screen size, and the fact you can read a PDF clearly on it.
ZenithUK said:
I've got a problem with a OneX I'm trialling for work.
This is a stock device with the latest OTA update applied. I installed Good for Enterprise, activated it, and got my work emails. I opened a PDF attachment which opened for a couple of seconds then the display glitched.
The attached images show what I mean. The display is glitched for every screen. Soft resetting the phone was okay until it started again a couple of minutes later.
Soft resetting a 2nd time was where my real problems started. The phone vibrated as it started, but the display stayed dark. If I tap the power, the touch buttons light up. If I go through the motions of the lock ring and my gesture lock, I feel vibrations of my actions but can't see a thing. If I ring the phone, it rings, the touch buttons light up and the LED blinks. The display stays dark at all times.
Does anyone have any idea what's going on here? It's almost like when a graphic card overheats in a PC.
Click to expand...
Click to collapse
Mine looks exactly the same once Ive had a few whisky's...
I had the exact same problem, so I shipped off my phone to service.
They actually changed the whole motherboard. I got my phone back 2 days ago, and it is working better than ever. Even better than before they changed the board.
My guess; Same problem as me. Busted motherboard. Im waiting to get a reply from the service guys that fixed my phone, so I can get some solid answers about what was actually wrong.
Hope this helps!
Best regards,
Sebastian
I have a Touch Pro2 Vodafone, but unlocked, and flashed with custom 6.5 ROM and it continually has the problem of the screen going blank and not coming to life.
I have tried Energy Rhodium 29022 and another ROM but both have the problem.
I guess it might be a hardware fault, but not sure really.
Any suggestions for fixing?
task29?
Does it "always" go to the blank screen, or is it intermittent?
Also, when you say going blank and not coming back to life - does this mean when the phone is rebooting? When it's off and being turned on? What are you doing that induces this behavior? Has the phone always done this? Have you tried the stock ROM?
You could also try remapping one of your buttons as a 'Power Management' button using the keyboard configuration to see if your power button is at fault. If all else fails, try flashing the shipped Rom to see if the problem continues. Good Luck!!
Sounds like a failed light sensor. Somewhere there was an app you could install that would display the sensor reading. If it was 0 then you had a bad sensor.
wizardknight said:
Sounds like a failed light sensor. Somewhere there was an app you could install that would display the sensor reading. If it was 0 then you had a bad sensor.
Click to expand...
Click to collapse
I know of such a thing for Android, but does one exist for WinMo?
arrrghhh said:
I know of such a thing for Android, but does one exist for WinMo?
Click to expand...
Click to collapse
I want to say that there was. It wasn't the primary function of the app, but info you could get from it. It has been more than 6mo since I was fooling around with WM on the TP2.
I ran task29 before
Have tried three roms
Problem occurs e.g., today, blank screen, cannot activate, remove battery, try to turn on, get the buzzing sound which means it's turning on but still blank.
Press buttons, oops looks like I'm calling someone.
Phone still blank. Then get incoming call - it wakes up.
This happens regularly, blank and cannot wake up.
Usually charging it wakes it up.
Flash back to stock, if it's still occurring there it's probably a hardware issue. As was stated earlier, the proxy sensor is suspect for sure.
thelawnet said:
I ran task29 before
Have tried three roms
Problem occurs e.g., today, blank screen, cannot activate, remove battery, try to turn on, get the buzzing sound which means it's turning on but still blank.
Press buttons, oops looks like I'm calling someone.
Phone still blank. Then get incoming call - it wakes up.
This happens regularly, blank and cannot wake up.
Usually charging it wakes it up.
Click to expand...
Click to collapse
That really sounds like a bad sensor.
And the advantage to that is, if it is a bad sensor, you could always perform some surgery on your device and install a new screen & digitiser as I did on mine. I had a problem with a slightly rattly earpiece afterwards but I think it was something I did. Handily I was able to purchase a pre-built screen and digitiser as a single unit complete with ribbon cables, I just had to swap it out and reattach the various ribbon cables. Proximity sensor and LDR are all in the one unit above the screen... Which is quite useful as they're all tiny surface mounted components
If you don't want to invest money, and like android I think that FRX07.1 does not use the sensor. That build would let you use the phone as is.
thelawnet said:
Any suggestions for fixing?
Click to expand...
Click to collapse
Any updates there OP? Did you make any advancement? =]
It is strange, but whenever I call with somebody, the screen just won't turn off when I put the phone to my ear. It turns off after few minutes because of the screen timeout, but sometimes I press stuff with my cheek.
Both G-sensor and light sensor work. Is it a common problem? This never happened with my previous HTCs :/
Matt.Murdock said:
It is strange, but whenever I call with somebody, the screen just won't turn off when I put the phone to my ear. It turns off after few minutes because of the screen timeout, but sometimes I press stuff with my cheek.
Both G-sensor and light sensor work. Is it a common problem? This never happened with my previous HTCs :/
Click to expand...
Click to collapse
I think I know your problem friend. Last I heard of this issue it was with a droid turbo. He was a hardcore conspiracy guy. So he had all the sensors n $hit covered. I'm not sure how long he had them covered. But after awhile his phone screen wouldn't turn off during calls. Once the tape was removed it worked. If that doesn't work. If your running a custom or stock based rom with tweaks just wipe the system and caches. And reflash the rom it will of course take its usual 10-15 boot up time because of the cache wipe. If you don't use custom stuff. Make sure you have your stuff backed up to google, and refer to a slightly up to date ruu thread to wipe and reset your phone.