Related
Hey All,
I am a long time "rooter" (June of 2010) on my Dinc. However, I am trying to Flash the new version of Clockworkmod Recovery. I open Rom Manager, click option 1 to "Flash ClockworkMod Recovery" to version 3.0.0.5. It asks me to verify my phone (Dink) and then says it flashed correctly. So, I reboot into Recovery and it is still the green text and says version 2.5.x.x. I reboot the phone and look in Rom Manager again it is says my Current version is 3.0.0.5. So, Rom Manager thinks I have the latest version of Recovery but I don't. I have tried other methods of Flashing the new version but that isn't working either. Specifically, I tried the ADB Shell. I get into ADB Shell just fine, but when I try to mount the SDCARD I get an error. I can boot the phone up and navigate just fine to the SDCARD. So I am not sure what the issue is. Any help would be greatly appreciated.
**UPDATE** I also had update.zip on the root of my sdcard, I deleted that and it still doesn't work.
i think you have reformat the partition
carepack said:
i think you have reformat the partition
Click to expand...
Click to collapse
Will that do damage? What partition, the SDcard? Please elaborate. Do that in the Clockworkmod Recovery?
FWIW, the new clockwork has compatibility issues with 95% of the flashable roms and extras out there right now. I wish I had not updated, and I am unable to go back (a nand restore would not do it.) Unless you feel a pressing need, you may be better off with the old version.
I got so frustrated, I switched my recovery to Amon_RA, which seems to work better for me at this point.
CJeep said:
FWIW, the new clockwork has compatibility issues with 95% of the flashable roms and extras out there right now. I wish I had not updated, and I am unable to go back (a nand restore would not do it.) Unless you feel a pressing need, you may be better off with the old version.
I got so frustrated, I switched my recovery to Amon_RA, which seems to work better for me at this point.
Click to expand...
Click to collapse
Ok, well I am using CM7 ROM and I think you have to have the new version. I reallly like CM7 so it would be worth it for me if I can get it to work. Can I use Amon RA with CM7 Rom?
foldog22 said:
Ok, well I am using CM7 ROM and I think you have to have the new version. I reallly like CM7 so it would be worth it for me if I can get it to work. Can I use Amon RA with CM7 Rom?
Click to expand...
Click to collapse
You do not need the new recovery for CM7 to work. You should also go to 3.0.0.8, there are problems with 3.0.0.5
See http://forum.xda-developers.com/showthread.php?t=970032 for details.
CJeep said:
FWIW, the new clockwork has compatibility issues with 95% of the flashable roms and extras out there right now. I wish I had not updated, and I am unable to go back (a nand restore would not do it.) Unless you feel a pressing need, you may be better off with the old version.
I got so frustrated, I switched my recovery to Amon_RA, which seems to work better for me at this point.
Click to expand...
Click to collapse
See http://forum.xda-developers.com/showthread.php?t=970032 on how to downgrade clockworkmod.
If your theme/extras developers have not upgraded their install scripts (like they have been warned to do for quite a few months) then this is the reason they do not work with the new CWM.
I followed the instructions but it still isn't working. I think the issue is ADB Shell can't mount the SDCARD. While in recovery, I can navigate to the SDCARD, but for some reason ADB Shell can't mount it. I tried all three methods as prescribed in the link. None work.
foldog22 said:
I followed the instructions but it still isn't working. I think the issue is ADB Shell can't mount the SDCARD. While in recovery, I can navigate to the SDCARD, but for some reason ADB Shell can't mount it. I tried all three methods as prescribed in the link. None work.
Click to expand...
Click to collapse
While you are booted in recovery I do not believe you can flash a new one. Boot to your ROM and try from there.
I figured it out. I ran the Unrevoked for Life patch and at that point it would let me update the Recovery image. Not sure if that was a prereq. or not. However, I am still experiencing issues. I am running CM7 with 3.0.0.8 Recovery. I am trying to update the nightly builds and it fails. Using Rom Manager to update my rom, it downloads the update. Reboots into Recovery and then says something about E:\ failure.
Well, I finally got the new recovery image but I can't update CM7 ROM's. It downloads the "Nightly Updates" but then says it can't mount E:\ when it reboots into recovery.
I don't want to make this long so here goes. I don't have a clue what happened but it some how worked.
I just wanted to root my phone so I went to this site and followed the instructions to the key.
http://htcevohacks.com/htc-evo-hacks/how-to-root-htc-evo-4g-new/
I had problems with step 10 and I dont even know if i properly saved the wimax what ever the hell that is/
When the bootloader came up it would just load from the sdcard and load up the " PC36IMG.zip" and and update.
I was never able to do step 11.
I kept going back and forth trying to repeat the step and that z4 app would never let me unroot and i repeatedly rerooted.
So I decided to reset my phone and sdcard hoping this would reset the whole process.
I then found something else to root. This website.
http://theunlockr.com/2010/07/20/how-to-root-the-htc-evo-4g-unrevoked-method/
Unfortunatley I didn't follow the instructons right because I am a damn fool.
So I went to straight running the unrevoked app without running the modified Android USB driver. Wierd thing is that I already got that superuser ninja looking guy in my apps. I was able to use wifi tether.
Now here is the thing, I was never able to do that recovery thing with that little black screen with green letters. It seems that I skipped that step to recover something. How can I redo that?
When I went to ROM manager and tried to install a ROM it says "flashing an update package on a recovery other than clockworkmod recovery may not work properly. Proceed?"
Does that mean it won't work? Im afraid to push Proceed.
Hope I made sense for someone to help. Its a giant mess... I wish I could start all over...
Boot into the bootloader and accept the update and reboot, that'll install a recovery for you.
Also, you're using the paid version?
teh roxxorz said:
Boot into the bootloader and accept the update and reboot, that'll install a recovery for you.
Also, you're using the paid version?
Click to expand...
Click to collapse
Dude I love you. What about when loading the ROM from ROM manager, "flashing an update package on a recovery other than clockworkmod recovery may not work properly. Proceed?"
What is clockworkmod recovery, what does it do, where do I get it?
Oh and yes i am using the paid version, why should I get my 5 bucks back?
Palomino0513 said:
Dude I love you. What about when loading the ROM from ROM manager, "flashing an update package on a recovery other than clockworkmod recovery may not work properly. Proceed?"
What is clockworkmod recovery, what does it do, where do I get it?
Oh and yes i am using the paid version, why should I get my 5 bucks back?
Click to expand...
Click to collapse
Clockwork recovery is just different from amon_ra. You can go into rom manager and click flash clockwork recovery, if you wish. And that message means like flashiing clockwork on amon_ra , you may get errors. Also, you can use clockwork on amon_ra, as to still download roms, but you can't backup with it.
I also want to add ever since I tried the root, it took my phone back to the stone age. I los the newest htc update with swype. Why is that?
The Rom Mananger isnt working for me either. It wont load any ROMS. IT says downloading but nothing ever happens, how long does it take to download a ROM?
I downloaded this OTA SUPERSONIC 3.70 and it wont load either? Whats going on .
I really need some major help!
Palomino0513 said:
I also want to add ever since I tried the root, it took my phone back to the stone age. I los the newest htc update with swype. Why is that?
The Rom Mananger isnt working for me either. It wont load any ROMS. IT says downloading but nothing ever happens, how long does it take to download a ROM?
I downloaded this OTA SUPERSONIC 3.70 and it wont load either? Whats going on .
I really need some major help!
Click to expand...
Click to collapse
I'm not sure why you would root your EVO without knowing anything about the process or at the very least the terminology, but it's not too late. I recommended that you go and read and get a better feel for the process.
There are at least a dozen threads on the subject. Here's one to start you off Helpful Threads.
i didnt see anyone having this problem but got my gn and unlocked it yest, i came fr evo3d and we used to wiping everything n cache n dalvik so i tried to flash my first rom and im getting error " error in /sdcard/toro_aokp_b8.zip(status7) installation aborted assert failed:getprop(ro.product.device==toroII
i thought it was that rom but i tried flashing another rom and getting same message , if someone can help i appreciate it, i came fr the evo3d left sprint after 11yrs and woow what a difference in network, awesome network but im spoiled with rooting my ogevo n evo3d lol i love this phone hope i can fix this issue
Could you let us know what roms you've tried and the exact process you used please. Also are you using CWM?
RTContent said:
Could you let us know what roms you've tried and the exact process you used please. Also are you using CWM?
Click to expand...
Click to collapse
k first rom i tried AOSP 4.0.3ANDROID OPEN KANG PROJECT-TORO BUILD8 so i wiped data factory reset and cache n dalvik and flashed the rom, it looks like it starts to flash but aborts with the message above, then i restored my nan backup rebooted and went back to cwm to reflash the second time around i only wipe data factory reset cuz thats what the op says to do on his thread so i only wipe data factory n flash the rom still same error, so i went to try another rom GUMMYNEX 0.2.3 and i did the same process with both im following the steps their stating in the op in have cwm
From what the error sounds like is that it doesn't think you have the correct device. You have a CDMA phone and not a GSM?
RTContent said:
From what the error sounds like is that it doesn't think you have the correct device. You have a CDMA phone and not a GSM?
Click to expand...
Click to collapse
ui
yup, i got it fr verizon cdma, im starting to stress man, ive been so used the rooting world n having custom roms i dont know how i could do without it lol, i hope i can get this issue resolve
Flip35 said:
ui
yup, i got it fr verizon cdma, im starting to stress man, ive been so used the rooting world n having custom roms i dont know how i could do without it lol, i hope i can get this issue resolve
Click to expand...
Click to collapse
sure you are using the lastest CWM???
sure you are rooted??
did you try downloading the files from another puter??
i think i might know what the problem is my cwm says 5.5.0.2 and im looking here at somebody posted in the development section for a cdma cwm and it says 5.5.0.4 could that be the problem? if so how do i redo my recovery, follow the same steps i did my first one, i downloaded and extracted the files to my c drive and opened cmd and typed the commands, can i do that again while having already cwm to flash the new cwm on top of the old one? if thats the problem
Download rom manager. Then you can flash it while your booted in android.
RTContent said:
Download rom manager. Then you can flash it while your booted in android.
Click to expand...
Click to collapse
how ive never flashed cwm using rom manager, u meand download the file of cwm5.5.0.4 putting in the root like i do any rom and go into rom manager and install?
No just download the app Rom Manager. It will download the latest version and flash it with a single click within this app!
RTContent said:
Download rom manager. Then you can flash it while your booted in android.
Click to expand...
Click to collapse
wooooord, aight RTcontent good looking out, i guess when u said it looks like it sound it was reading my phone wrong was right, i had a gms cwm, thanx man used rom manager and since i put the new cwm in my root of sdcard when i press install cwm it automatically update it without even booting into recovery but just finished intalling a rom and IT WORKED!!!! UR DA MAN im excited thanx
I've been searching for a solution before writing my own post, for I'm aware there are probably many, many topics of people dealing with the same issue.
Well, here's is my problem.
I've got two wildfires A3333. Flashed CM 7.2.0 on both of them, successfully. GPS does work on only one of them. I've tried the GPS test on the other one. The compass is working, the localization is not.
So, as said before, I've googled for some solution for the other one, and here comes the temporary downgrading of CWM to 2.5.0.7 and then installing one of the following: buzz.radio-3.35.15.31-signed.zip, buzz.radio-3.35.20.10-signed.zip or buzz.radio-3.35.19.25-signed.zip that will be put on the SD.
Ok, everything is set up, let's reboot to recovery.
Now, the recovery screen is showing version 3.0.0.6 and I don't know if that's normal, since I've set it to 2.5.0.7 before rebooting. Won't mind for now.
Let's flash the zips. And all I get is this message, with all of the radios:
E: signature verification failed
Installation aborted.
Uhm, let's try by setting the option toggle signature verification to disabled.
Here's a different message:
Amend scripting (update-script) is no longer supported. Amend scripting was deprecated by Google in Android 1.5. It was necessary to remove it when upgrading to the Clockworkmod 3.0 Gingerbread based recovery.
Please switch to Edify scripting (updater-script and update-binary) to create working update zip packages.
Installation aborted.
It seems that the 3.0.0.6 version shown on the main menu is kind of relevant... Should it show 2.5.0.7 instead of that? What now?
Thanks in advance.
After flashing the temporary CWM,it'll automatically boot into that CWM version. Now flash the radio with that.
And if you reboot you'll return to the CWM version you had before.
To fix GPS you could also use this method,
http://forum.xda-developers.com/showthread.php?t=2354499
lakshan_456 said:
After flashing the temporary CWM,it'll automatically boot into that CWM version. Now flash the radio with that.
And if you reboot you'll return to the CWM version you had before.
To fix GPS you could also use this method,
http://forum.xda-developers.com/showthread.php?t=2354499
Click to expand...
Click to collapse
Yes, if by "flashing the temporary CWM" you mean entering the ROM manager, tapping on All ClockwordMod Recoveries, download the 2.5.0.7 version, let it install and tap Reboot into recovery, well that's exactly what I did. And the recovery screen is showing me this 3.0.0.6 version anyway, which is kind of suspicious to me.
I've already read the topic you linked, some days ago, but that means having to wipe the CM 7.2.0 and reinstall it later and I'm not sure whether I can backup the apps that are in the EXT partition since I'm using Link2SD. And honestly, I'm not even sure I'm able to make a good backup.
Snakebar said:
Yes, if by "flashing the temporary CWM" you mean entering the ROM manager, tapping on All ClockwordMod Recoveries, download the 2.5.0.7 version, let it install and tap Reboot into recovery, well that's exactly what I did. And the recovery screen is showing me this 3.0.0.6 version anyway, which is kind of suspicious to me.
I've already read the topic you linked, some days ago, but that means having to wipe the CM 7.2.0 and reinstall it later and I'm not sure whether I can backup the apps that are in the EXT partition since I'm using Link2SD. And honestly, I'm not even sure I'm able to make a good backup.
Click to expand...
Click to collapse
I wouldn't really recommend using ROM Manager, and what I meant by flashing was to flash the CWM zip with your current Clockworkmod recovery.
And also consider upgrading your recovery.
And about the guide, just make a nandroid backup with CWM, and restore it instead of flashing a new rom.
Hope this helps
I shall give a try to it all and let you know.
One last question before I proceed. In order to upgrade my recovery I'd have to download the latest CWM available for Buzz and install it the same way I'll do with v2.5.0.7 (of course, after that step), am I right?
Thanks!
Ok, I've installed the v2.5.0.7 via the install from .zip option and got to install the radios. Woo!!
No, hold back.
Now the GPS icon is showing up but GPStest doesn't detect any activity.
I've installed 13.55.55.24H_3.35.20.10 first, then 13.45.55.24H_3.35.15.31 and then 13.53.55.24H_3.35.19.25. Same result.
Now should I rely on plan B?
I've read of someone who got it working by installing the 3 radios in crescent order. Is it worth a try?
Snakebar said:
I shall give a try to it all and let you know.
One last question before I proceed. In order to upgrade my recovery I'd have to download the latest CWM available for Buzz and install it the same way I'll do with v2.5.0.7 (of course, after that step), am I right?
Thanks!
Click to expand...
Click to collapse
No, that'll only be temporary, as with 2.5.
Get the PC49IMG.zip file for that recovery, put it on the root of the SD, reboot to bootloader, it'll scan and will ask to install, select yes, you're done.
First GPS fix will take some time, maybe from 2-10 mins.
I've only flashed the .20.10 Radio. It worked for me...
Or if you have a sense rom or the backup of your stock rom, give the guide a try...
Try this radio file. link, worked for me under cwm 2.5.0.7
lakshan_456 said:
No, that'll only be temporary, as with 2.5.
Get the PC49IMG.zip file for that recovery, put it on the root of the SD, reboot to bootloader, it'll scan and will ask to install, select yes, you're done.
First GPS fix will take some time, maybe from 2-10 mins.
I've only flashed the .20.10 Radio. It worked for me...
Or if you have a sense rom or the backup of your stock rom, give the guide a try...
Click to expand...
Click to collapse
My fault, there's something I should make clear.
The radios I've been talking about before have been installed on the first Wildfire, the one I said the GPS was working (and in the meanwhile it proved to be untrue as I discovered the GPS icon has never showed up before flashing the radio). This one Wildfire has CWM 2.5.0.1, installed with Unrevoked. The second Wildfire (which I'd like to use as my usual phone) was rooted with PC49IMG as Unrevoked wouldn't work with it and is running CWM 3.0.0.6, which I've reported in the first post.
For now, let's discard the CWM 3.0.0.6 phone.
It is on the CWM 2.5.0.1 phone where I've temporarily installed 2.5.0.7 and flashed the radios. Could it be relevant?
(maybe I'd better update the CWM anyway)
ChristianPe said:
Try this radio file. link, worked for me under cwm 2.5.0.7
Click to expand...
Click to collapse
Uhm, link is broken. My CWM 2.5.0.7 looks to be working properly anyway.
stick with 2.5.0.7 recovery and 20.10 radios, that worked for me using Navitel, as for file here.
Flashed Froyo 2.2.1 shipped ROM... and GPS didn't work on it either. Great.
I've restored my CM backup and found out all my link2SD linked apps to be screwed in return. Vanished. Link2SD says there's soooo much free space in that second partition... can't imagine when it's been formatted, but nevermind.
ChristianPe said:
stick with 2.5.0.7 recovery and 20.10 radios, that worked for me using Navitel, as for file here.
Click to expand...
Click to collapse
I've already got that radio version but tried to flash the one you've gently provided me, well, same as the other radios. Icon showing but no activity at all.
I give up.
Snakebar said:
Flashed Froyo 2.2.1 shipped ROM... and GPS didn't work on it either. Great.
I've restored my CM backup and found out all my link2SD linked apps to be screwed in return. Vanished. Link2SD says there's soooo much free space in that second partition... can't imagine when it's been formatted, but nevermind.
I've already got that radio version but tried to flash the one you've gently provided me, well, same as the other radios. Icon showing but no activity at all.
I give up.
Click to expand...
Click to collapse
where you at?, i might be a weather-related issue?
ChristianPe said:
where you at?, i might be a weather-related issue?
Click to expand...
Click to collapse
Unlikely, it's been some days I'm testing the GPS on the phone. But I shall test it away from home to be sure.
I'm from Naples, (IT) by the way.
Snakebar said:
It is on the CWM 2.5.0.1 phone where I've temporarily installed 2.5.0.7 and flashed the radios. Could it be relevant?
(maybe I'd better update the CWM anyway)
Click to expand...
Click to collapse
Not really sure if CWM matters or not, we use 2.5 to flash radios because the flashing script is different from currently used ones.
Ty upgrading anyway,
Are you sure it isn't a hardware fault. If GPS doesnt work in stock rom, it could possibly be a hardware issue...
lakshan_456 said:
Not really sure if CWM matters or not, we use 2.5 to flash radios because the flashing script is different from currently used ones.
Ty upgrading anyway,
Are you sure it isn't a hardware fault. If GPS doesnt work in stock rom, it could possibly be a hardware issue...
Click to expand...
Click to collapse
Too weird it happens on both devices, even if... well them both have had a nice dive in the sea but GPS used to work before flashing the new ROMs on each phone.
Sure there's something not correct in my procedure but can't find it out.
Snakebar said:
Too weird it happens on both devices, even if... well them both have had a nice dive in the sea but GPS used to work before flashing the new ROMs on each phone.
Sure there's something not correct in my procedure but can't find it out.
Click to expand...
Click to collapse
Well, I'm sorry mate. unless its a hardware fault or something I'm not in the know of, there are no more solutions I can think of.
Behold! He's thinking back.
It just looks like it's not able to track many satellites. Well, at least that's a relief.
Snakebar said:
Behold! He's thinking back.
It just looks like it's not able to track many satellites. Well, at least that's a relief.
Click to expand...
Click to collapse
Indeed it is, atleast it wasn't a hardware issue
Well done mate...
P.S. :- I'd recommend using 'GPS status and Toolbox' app which is much better than GPStest.
Sent from my HTC Wildfire using Tapatalk 2
lakshan_456 said:
P.S. :- I'd recommend using 'GPS status and Toolbox' app which is much better than GPStest.
Click to expand...
Click to collapse
Done!
~400s for first GPS lock... yeesh...
Snakebar said:
Done!
~400s for first GPS lock... yeesh...
Click to expand...
Click to collapse
Mission accomplished.
Cheers
Sent from my HTC Wildfire using Tapatalk 2
Hello. I tried to root my Samsung Galaxy Tab 3 - T210 and i think i really screwed it up. I did not make any backup, that was mistake NR one.
I got clock work mode up and running but i cant install any ROM, have tried The original Firmware, RocketTab, Cyanogenmod and cant pass the installation process and i think i cant turn back cause i got no backup and no way to install it again.
When i run any of these ROMs i get this error :
format() expects 4 args, got 5
Click to expand...
Click to collapse
No matter what i do, im a a bit scared know cause i think i am really close on destroying the tablet.
Can any one help me ? give me tips ?
CWM that i am running is : T210_CWM.6.0.4.7.recovery that i downloaded frome the XDA forum.
A,
panic solves nothing.
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/
when in doubt choose the most recent. zip or tar for odin.
for a rom i suggest svelte to get things straight.
then go from there.
m
1
Thank you for a quick answer, so i should change out CWM for Philz Touch ?
What is "Svelte" ? have no clue what that means.
What to have 110% solid answer before i go wreck some thing more.
Ah, of course.
Audriuss95 said:
Thank you for a quick answer, so i should change out CWM for Philz Touch ?
What is "Svelte" ? have no clue what that means.
What to have 110% solid answer before i go wreck some thing more.
Click to expand...
Click to collapse
I hear you, okay,
svelte rom thread - http://forum.xda-developers.com/showthread.php?t=2722582
great rom, minimal issues. philz advanced recovery is cwm with a good touch interface and more and very helpful options.
So yes, switch. All else is almost always solveable as long as your recovery is solid.
m
1
moonbutt74 said:
A,
panic solves nothing.
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/
when in doubt choose the most recent. zip or tar for odin.
for a rom i suggest svelte to get things straight.
then go from there.
m
Click to expand...
Click to collapse
moonbutt74 said:
I hear you, okay,
svelte rom thread - http://forum.xda-developers.com/showthread.php?t=2722582
great rom, minimal issues. philz advanced recovery is cwm with a good touch interface and more and very helpful options.
So yes, switch. All else is almost always solveable as long as your recovery is solid.
m
Click to expand...
Click to collapse
To be 100% sure when people say recovery they mean the programs like CWM or TeamWin and so on right ?
Is it bad for the device to change often the recovery software ? cause i have done that couple of times, started with TeamWin and later on ended up with CWM.
But the thing is that the problem is the installation process, it does not matter what ROM i use i get still the same error.
And for the Philz Touch could you copy the name of the link that i should download, they all look the same and way more links that i am used to.
Audriuss95 said:
To be 100% sure when people say recovery they mean the programs like CWM or TeamWin and so on right ?
Is it bad for the device to change often the recovery software ? cause i have done that couple of times, started with TeamWin and later on ended up with CWM.
But the thing is that the problem is the installation process, it does not matter what ROM i use i get still the same error.
And for the Philz Touch could you copy the name of the link that i should download, they all look the same and way more links that i am used to.
Click to expand...
Click to collapse
The reason you can't install any rom is because you do not have the latest version of CWM installed. You should always install the newest version when you install any recovery.
The newer roms are using an updater-script that will not work on CWM 6.0.4.7. Install an updated recovery and then install the rom that you want.
Sent from my SM-T310 using Tapatalk
Audriuss95,
Is it bad for the device to change often the recovery software ? cause i have done that couple of times, started with TeamWin and later on ended up with CWM.
To answer your question no yes maybe. Travel around through XDA and read/learn and you will understand.
as for philz i would try this one https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/philz_touch_6.44.9-lt02wifi.zip
in general find a recovery that works for you and stick with it until an update is actually called for.
m
If I were you, I would unroot and return to stock using ODIN first before I try anything else. If you need instructions, Google "unroot and return to stock using ODIN".
1
gr8nole said:
The reason you can't install any rom is because you do not have the latest version of CWM installed. You should always install the newest version when you install any recovery.
The newer roms are using an updater-script that will not work on CWM 6.0.4.7. Install an updated recovery and then install the rom that you want.
Sent from my SM-T310 using Tapatalk
Click to expand...
Click to collapse
What is then the newest version that i can use on this device ? could you maybe throw a link at me ?
moonbutt74 said:
Audriuss95,
Is it bad for the device to change often the recovery software ? cause i have done that couple of times, started with TeamWin and later on ended up with CWM.
To answer your question no yes maybe. Travel around through XDA and read/learn and you will understand.
as for philz i would try this one
in general find a recovery that works for you and stick with it until an update is actually called for.
m
Click to expand...
Click to collapse
Thank you for the answear. gone try a little bit more with the recovery i already have and update it like gr8nole said. Maybe that could be my big problem.
ikeny said:
If I were you, I would unroot and return to stock using ODIN first before I try anything else. If you need instructions, Google "unroot and return to stock using ODIN".
Click to expand...
Click to collapse
Yeah i have thought of that but the thing is i never took a backup so i cant go back atleast from what i read on google.
Audriuss95 said:
Yeah i have thought of that but the thing is i never took a backup so i cant go back atleast from what i read on google.
Click to expand...
Click to collapse
Without a backup, you will lose your data and files. But you can restore, since you can download the firmware from SamMobile.
Audriuss95 said:
What is then the newest version that i can use on this device ? could you maybe throw a link at me ?
Click to expand...
Click to collapse
6.0.4.9 is the latest.
http://www.androidfilehost.com/?w=files&flid=12949
Choose the one with "flashable" in the name and then flash it using your current CWM recovery; then reboot recovery.
1
ikeny said:
Without a backup, you will lose your data and files. But you can restore, since you can download the firmware from SamMobile.
Click to expand...
Click to collapse
I downloaded the FirmWare from SamMobile still get an error. the one that a wrote above.
gr8nole said:
6.0.4.9 is the latest.
Choose the one with "flashable" in the name and then flash it using your current CWM recovery; then reboot recovery.
Click to expand...
Click to collapse
Ok i am going to try out that file.
I use that flashable file like i would install ROM ? right but it on SD card and not use ODIN or ?
1
I updated to to the newest CMW tried the CM mod and got an error but it only said "Installation Aborted" the i tried to install the RocketTab 3.1 and it worked. I downloaded it from the this thread [ROM][SM-T210/T210R][Jan 30] RocketTab v3.1 Lite / Full / MODs
But i would rather like to have CM what can do ?
hey
Audriuss95 said:
I updated to to the newest CMW tried the CM mod and got an error but it only said "Installation Aborted" the i tried to install the RocketTab 3.1 and it worked. I downloaded it from the this thread [ROM][SM-T210/T210R][Jan 30] RocketTab v3.1 Lite / Full / MODs
But i would rather like to have CM what can do ?
Click to expand...
Click to collapse
good to hear you got it sorted. CM just isn't happening yet. just watch the forum like a hawk like everyone else is...:cyclops:
If your worried about destroying your tab you prolly shouldn't have come to mod it.I know sounds like a douche bag thing to say but even putting on the flash or roms that go with the tab can destroy your tab if done improperly or even if they glitched while flash which does happen or even worse power outage when flashing.
1
moonbutt74 said:
good to hear you got it sorted. CM just isn't happening yet. just watch the forum like a hawk like everyone else is...:cyclops:
Click to expand...
Click to collapse
So i should put the CM mod aside ?
piercejpierce said:
If your worried about destroying your tab you prolly shouldn't have come to mod it.I know sounds like a douche bag thing to say but even putting on the flash or roms that go with the tab can destroy your tab if done improperly or even if they glitched while flash which does happen or even worse power outage when flashing.
Click to expand...
Click to collapse
Nono it is okey to say something like this, but the thing is i like to learn this stuff, took me about 3 days to learn how to flash a BIOS on a computer but when i got the hang of it i learned it.
I am scared of destroying the tablet but how else would i learn ? cause reading does not always help But i got it back up again. And i knew when to ask for help.
But the RocketTab looks to work well at least for know, but would love CM mod couse i have it on my S4 and when and with the RocketTab i only get android version 4.1.2
1
Thank you for the fast help, the tablet is up and running, gone skip for know trying to use CM mod.