[Q] Remote Desktop for wp7 can't run - Windows Phone 7 General

So ok I've got a router and I have forwarded the port correctly (at least the program says that I did) and VNC server is working fine. But I can't access my comp... What can be the problem? I use external VNC server with my networks ip
(192.168...) as the embedded VNC server aint working (It says that I could not connect to VNC server ). Please guys answer me as Im going to kill somebody

Did you enable remote desktop connection setting and add users for the remote desktop connection on you computer.
also you need a dynamic IP address if you are going to remote desktop connection away from home.

Yes I have dynamic IP but I didnt get the first part.

if you got Win7 or Vista. you need to have the professional version of the operating system.
First you need to go to system property. you can go to Control Panel >> System.
then you will see an option for "remote setting" on the top left hand side of the page.
Select the option Allow connections from computer running any version of remote desktop"
Click on the select user button to add your user account for remote desktop connections.
Enable Remote Desktop connection in your Windows Firewall setting as well as your anti Virus Software firewall setting and finally your router firewall settings.

Related

Terminal Services via Wifi on XDAIIs

Hi all,
I've just got my XDAIIs and am just playing about with it before I start loading all my apps and syncing with outlook.
I've got the Wifi working with my home access point (with encryption).
When I try and use Terminal Service to remote desktop to my pc it trys to dial-up to O2 Active GPRS - why won't it use the wifi connection thats enabled? I can ping the pc via hostname and ip fine though.
By the way, the XDIIs is setup for use on O2 as standard (it's a brand new contract phone).
Any ideas? ANy help would be appreciated.
Many thanks
i think if you change the type of network from internet to work on the xda iis, then it might work.
I had a similar problem with activesync over wifi and had to set network card to work to get it to connect.
I tried that and it was still doing the same.
For atest I deleted all connection settings.
Then Terminal Services told me that I HAD to create a VPN connection setting for the server I'm connecting to. I did this but it kept faling when trying to connect with user/pass error.
I then thought I'd try the IP address of my machine instead of the hostname - This worked straight away!!
So does Terminal Services not like hostnames? I was hoping to connect to my server when I'm away from home using my no-ip address.
Does anyone have a similar setup or can shed any light on this?
Many thanks
DOH!
Just realised I should be using the fully qualified hostname rather than just the pc name.
i.e.
"server.uniquetouch.local" instead of just "server"
"athlon1400.uniquetouch.local" instead of just "athlon1400"
"pentium4.uniquetouch.local" instead of just "pentium4"
"dell.uniquetouch.local" instead of just "dell"
Now that I've got that bit working, I'm going to add the O2 GPRS connection settings back in and see if it still works.
Have you tried pocketVNC yet?? im just about to install it as i run vnc on all our system instead of terminal services
I also recommend VNC viewer.
It acts, amongst others, as a remote control to my windows media player & winamp on my media server.
You can find it all over the place, but here is 1 link:
http://www.cs.utah.edu/~midgley/wince/vnc.html

Remote Desktop

can some one please explain how to use remote desktop with windows xp sp2
a step to step guide ( dummies version ) would be highly appreciated..
thanx
On your PC:
- System Properties (right click on My Computer)
- Remote tab
- Enable remote desktop check box (check it)
- On firewall, port forward 3389 to the IP address of your XP machine
- Go to http://whatismyip.com and note the IP you are given.
- Try to remote in from your phone with that IP
jonjoyner83 said:
On your PC:
- System Properties (right click on My Computer)
- Remote tab
- Enable remote desktop check box (check it)
- On firewall, port forward 3389 to the IP address of your XP machine
- Go to http://whatismyip.com and note the IP you are given.
- Try to remote in from your phone with that IP
Click to expand...
Click to collapse
how to use it over wifi..
my computr has a wifi card
exec is wifi enabled
my computer has internet connection.
no internet connection on my exec.
will it be possible to use remote desktop in this case
please explain
jonjoyner83 said:
On your PC:
- System Properties (right click on My Computer)
- Remote tab
- Enable remote desktop check box (check it)
- On firewall, port forward 3389 to the IP address of your XP machine
- Go to http://whatismyip.com and note the IP you are given.
- Try to remote in from your phone with that IP
Click to expand...
Click to collapse
Hmm... I can't get it to work. My Universal says:
Cannot connect. Likely reasons are:
1. Specified computer name or does not exist
2. A network error occurred while estabilishing the connection.
What I've done:
- Enabled the Remote Desktop on my computer.
- Forwarded the 3389 port to remote desktop in Windows's built in firewall. (I don't use any other one)
- Checked what is my IP
- Started the Remote Desktop Mobile on my Universal
- Entered the IP to the computer name
- Entered a username without any password, and domain
P.S.:
My Computer is behind a router. Maybe I need some other tweak?
P.P.S.:
What is the best Remote Desktop application if this one does not works? Maybe I should try another...
Help please.
Thanks
HyperMalac said:
P.S.:
My Computer is behind a router. Maybe I need some other tweak?
Click to expand...
Click to collapse
You need to set up your router to forward it to your PC. "Port forwarding", I think is the word, should be under Server/Application setup on your router.
hanmin said:
You need to set up your router to forward it to your PC. "Port forwarding", I think is the word, should be under Server/Application setup on your router.
Click to expand...
Click to collapse
WOW! You're fast! Try it, and post the changes
Well, I've found some things under my router Remote Management setup.
- Enabled HTTP
- Enabled UPNP
- Enabled PPTP
- Enabled IPSec
I'm quite new in router setup, because I've just get my first router about 1 months ago.
Maybe I'll try to pull out the router, and plug the internet directly to my PC. If it works, than the problem is in my router setup.
I've just realised it if I pull out the cable from the router, I cannot connect my PDa via wifi Saaaad
Now I must play with the router settings
Just a quick question. When switching on the wifi on your universal, which access point does it connect to ? Or you need to setup a adhoc between the pc and universal. Your universal must be on the same ip range as the desktop.
Let me know if this has been done yet.
There is some advice for setting up Terminal Services under XP SP2 at this link.
http://www.pctools.com/forum/showthread.php?t=27117
You also need to be able to ping the XP SP2 machine successfully from your XDA. Try vxUtil to make sure that you can do this.
I do this at home through WiFI and it works well, particularly through the 640x480 screen.
HyperMalac said:
Well, I've found some things under my router Remote Management setup.
- Enabled HTTP
- Enabled UPNP
- Enabled PPTP
- Enabled IPSec
Click to expand...
Click to collapse
Well, I won't encourage you to mess with the router if you don'tknow what you are doing. As of a router, Remote Management setup -> Enabled HTTP sounds to me like that just opened your router to the outside world, and if they are able to brute force their way into your router, your router is at their mercy.
Anyway, since you said that you used your phone and PC at the same router, you ought to able to do it with the LAN IP address, which should start with 192.168. At your PC, Start -> Run -> "Cmd" -> "ipconfig". That should display your network stuff, look for the 'IP address'. Use this address instead of the one you get from whatismyip.com
Sorry for nnot posting this time. I've been busy.
Well,
To hanmin:
I didn't played with the router, because of no-time, but I'll try what you've said. But I know ehat I'm doing, I'm just not experienced about advanced networking. But maybe time will teach me. Or you guys
To mikeycrawford:
Thanks will read it, and if there's any solution try it too.
To wh1t3w0lf:
Well, I want to try remote desktop via internet, not via WiFi. I mean I want to connect to my computer from my work, so I didn't selected ad-hoc connection. BTW thanks for the help
So thank you all your helps, I will have 2 days break, maybe then I'll try all you've written. And of course post the results.
Cheers,
hanmin said:
Well, I won't encourage you to mess with the router if you don'tknow what you are doing. As of a router, Remote Management setup -> Enabled HTTP sounds to me like that just opened your router to the outside world, and if they are able to brute force their way into your router, your router is at their mercy.
Anyway, since you said that you used your phone and PC at the same router, you ought to able to do it with the LAN IP address, which should start with 192.168. At your PC, Start -> Run -> "Cmd" -> "ipconfig". That should display your network stuff, look for the 'IP address'. Use this address instead of the one you get from whatismyip.com
Click to expand...
Click to collapse
Awwwwwwww maaaan just tried it and it works!!!!!! Now I have another question.
Ok I'm logged in, but the XP user on my PC automatically logging out. My friend doing remote desktop from our work, and when he logs in from the work on a Pc, the PC what is at home, don't logs out, it still the same, and he can use the computer to help his girlfriend.
So if he logs in form work, his gilrfried can see what he is doing.
I hope you guys can understand it, I'm writing a bit messy.
So can I do it form my PDA to PC too? And the anwer is yes, can I get a separate program for this? I think my friend uses a program what is called VNC.
And another question: I know the built-in remote desktop in the best program for this process. What are the most useable programs? I mean: best speed, or more beautiful look.
Cheers, and thanks for helping
Can somebody extract the Remote Desktop Mobile from wm6 to put it into wm5 as an app?
Thx!
jonjoyner83 said:
On firewall, port forward 3389 to the IP address of your XP machine
Click to expand...
Click to collapse
What do you mean by this? I thought this port has to be associated with "Remote Desktop?
Remote Dsktop WM6
... has already beenr extracted and works perfect on WM5, just use search ...
Best regards,
tsfnet

Remote Desktop

How do i get remote desktop working with VIsta?
Go into system settings, click the remote tag and allow remote desktop connections to this computer. Your local admin account will automatically have access, but you can add other user account to the RDC when you enable it. You may then need to go into your router and forward port 3389 to the ip address of your pc you're remoting into.
Doin this on the dash? I setup RDC for my TP2, let me know if it works. The dash was my phone until I got the TP2.
It ask me to enter the name of the remote computer and a user name.

[REQ] How To - Remote Desktop Mobile

Is there some tutorial/help on using hte Remote Desktop Mobile to connect to a PC? I haven't been able to connect TP 2 to my PC running Vista. I put in the Computer name, User name, password, and domain and when I clicked "Connect", it returned an error:
Cannot connect. Likely reasons are:
1. specified computer name or ip does not exist.
2. A network error occured while establishing connection.
I tried both domain name and ip. Made no difference.
I also tried both on 3G as well as WiFi but it made no difference.
You'll need to set up two things:
set the vista machine to accept the remote connections
http://howtogeek.com/howto/windows-vista/turn-on-remote-desktop-in-windows-vista/
forward port 3389 on your router if you have one
http://portforward.com/
Then you should be up and running!
'tunes
Thanks, mad-tunes. Got it working now, at least when connected by WiFi. And when the phone and the PC are on the same Wifi network, I can connect simply by putting in the computer ip address. No domain is required and no port configuring required too.
Lord_BlackAdder said:
Thanks, mad-tunes. Got it working now, at least when connected by WiFi. And when the phone and the PC are on the same Wifi network, I can connect simply by putting in the computer ip address. No domain is required and no port configuring required too.
Click to expand...
Click to collapse
Good stuff, glad it helped a bit....
If you can't connect from the outside world (ie, using GPRS), then it's most probably a port forward thing...
If you want to get this bit working: How's the machine you're trying to RDP to connected to the 'net exactly?
(ADSL modem, router etc?)
mad_tunes said:
Good stuff, glad it helped a bit....
If you can't connect from the outside world (ie, using GPRS), then it's most probably a port forward thing...
If you want to get this bit working: How's the machine you're trying to RDP to connected to the 'net exactly?
(ADSL modem, router etc?)
Click to expand...
Click to collapse
Yes, the PC is behind the router. So probably woould need to do port forward as you have suggested. Having tested it yet. Would try this out later this week.
I was wondering, is theres a way to do this if youre on a home edition of windows?
the home edition I dont believe has remote desktop.
Remote desktop mobile using 3G connection
Has anyone gotten remote desktop mobile to work using only a 3G connection? I've got it working perfectly using wifi but can't for the life of me figure out how to do it over 3G. I searched and the closest thing I could find to being helpful was the following:
I had the same problem till I created two VPN connections. One for internal use (WiFi) and one for extenal use (3G).
The internal one uses the internal IP address of the VPN server and the external one uses the external IP address.
You have to sleect which connection you want to use before starting the connection depending on whether u r using WiFi or 3G.
Hope that makes sense. It works 4 me.
Click to expand...
Click to collapse
This makes sense but it's confusing about what to change in the VPN connection settings. Can anyone explain in more detail?
Thank you very much
squirtpunk said:
I was wondering, is theres a way to do this if youre on a home edition of windows?
Click to expand...
Click to collapse
No. You can only use third party solutions like VNC. RDP host is not included in Home Edition.
You have to go into your router and set up a port forward so that 3389 goes to internal IP address of the system you want to remote into. If you have port forwarding/triggering, you can have a different port (eg, 3390) trigger to 3389 internally. If you don't have port forwarding, you can change the listening port from the default 3389 to, eg, 3390 and then you can create a port forward to remote in that way. To access, add :3390 to the end of the remote address (eg, 64.246.222.91:3390). The registry path to the listening port is:
HLKM\SYSTEM\CurrentControlSet\Control\Terminal Server\WinStations\RDP-Tcp\PortNumber
You must reboot after changing the setting.
If you have a domain, it is incredibly useful to set up DNS for this, then you can simply enter the DNS name in the client. This works internally as well.
Update: So i just went to a Starbucks and tried using the wifi there to connect to my remote desktop and it couldn't connect!? But it can connect when I'm using the same wifi router as my remote computer does this mean I don't have the router properly port forwarded? Or is it some other issue? Any advice would be great.
Thanks
When you use your wifi at home, it ends up in the same IP subnet as the remote computer, so all you need to do is to enter the computer name.
When you're at a hotspot, you need to enter the public IP address for your router and step up port forwarding. Wifi outside of your home is no different from using EVDO as far as IP addressing is concerned. You must enter via public IP.
If you don't know what your public IP address is, open a browser from any computer at home and go to this URL:
http://whatismyip.com
It will tell you what the public IP is.
Cheap Loop-Hole
I got Remote Desktop to work on 3G.
First open Opera (or what ever your default browser is) set a home page to something that takes at least 5-10 second to load (if longer, even better), like an email account or m.myspace.com. Simple sites like m.google.com won't work because they load to quickly.
Close OPERA: I mean make sure its closed not just minimized.
This next part needs to be done rather quickly, so I advise making Remote Desktop a top icon in your Start Menu.
So Launch opera, and quickly launch Remote Desktop and hit connect.
Remote Desktop will piggy back off the Opera browser connection to get out to your computer.
Note: (make sure remote desktop works at home first, either by wifi, blue tooth, or direct usb, and by checking it from a computer outside of your network) once you know it works you should be able to connect to it.
Also note: as some one stated above, make sure that proper ports have been open on the computer and router than you should be good to go.
I'm sure their is a registry fix to get the remote desktop working without doing this, but this is the only way I've been able to do it for now..
Hope this helps...
---
I'm currently using AT&T Tilt 2 Stock Rom and Radio.
Check this out guys, it might be of some help: http://forum.xda-developers.com/showthread.php?t=533664
Thanks a lot guys! It's working just fine now (on both wifi and 3G!) turns out I didn't have the router properly port forwarded.
just started trying to figure this out today. spent about 15 minutes but couldnt get it going.
just installed windows7 on my old pc and im trying to get my htc tp2 (rhodium) to work with the preinstalled Remote Desktop Mobile application. i forwarded port 3389 on both tcp and udp since i didnt know which was necessary.
is a static ip necessary to get this setup by going into the ipv4 settings? also, what is the application looking for with the input for "domain"? - subnet mask? default gateway for my home network?
so far i have tried the following inputs in my tp2 for Remote Desktop Moble:
Computer: public ip
User Name: windows7 login name
password: windows 7 login password
domain: ???
any help is appreciated. going to try this more when i get home from work.
apathyps said:
just started trying to figure this out today. spent about 15 minutes but couldnt get it going.
just installed windows7 on my old pc and im trying to get my htc tp2 (rhodium) to work with the preinstalled Remote Desktop Mobile application. i forwarded port 3389 on both tcp and udp since i didnt know which was necessary.
is a static ip necessary to get this setup by going into the ipv4 settings? also, what is the application looking for with the input for "domain"? - subnet mask? default gateway for my home network?
so far i have tried the following inputs in my tp2 for Remote Desktop Moble:
Computer: public ip
User Name: windows7 login name
password: windows 7 login password
domain: ???
any help is appreciated. going to try this more when i get home from work.
Click to expand...
Click to collapse
network-wise what you need to do depends on how your PC's connected to the 'net...
if it's connected directly via something like a USB ADSL model or Virgin media cable box, then you'll only need to let 3389 through your PCs firewall.
If it's connected via anything like a router, then you'll also have to allow 3389 through your routers firewall, as well as forwarding port 3389 to your machine inside your network.
it's the port forwarding which needs the internal IP of your PC, so a static one's a good idea (otherwise, if your PCs internal IP address changes it'll stop working). you could set your router to always hand the same IP to your PC MAC address, which can be the best of both worlds (and how I do it).
http://www.portforward.coms a good place to start to find how to forward ports for your router if you're using one..
You also have to go to control panel>system>advanced system settings>remote and set things as you need in the 'remote desktop' section.
if you don't have the 'remote desktop' section, then you're running one of the home versions of the OS which doesn't support Remote desktop conenctions (out of the box )
re domains...if its a normal home PC and nothing to do with a business, then you wont have to enter one at all.
Once you're at home, get your TP2 on your internal network (wifi), and then try to rdp to your machine using its INTERNAL ip (192.168.*.*) and see if that works.
if it does, the PC end's fine and it's your router config you need to get right. if it doesnt, then its something at the PC..
post back here if you still have trouble..
ok, so connecting with the tp2 via 192.xxx.x.x works fine from within the network at home on wifi.
however, once i try and connect with the public ip, it doesnt work. did the port forwarding thing.
i setup the static ip, i tried putting the host pc in the dmz, and still nothing. i tried disabling the host pc's firewall, and nothing.
in remote desktop mobile, im putting in the public ip of the host pc, and have tried filling in the username and password fields, and also tried leaving them blank.
any ideas?
apathyps said:
ok, so connecting with the tp2 via 192.xxx.x.x works fine from within the network at home on wifi.
however, once i try and connect with the public ip, it doesnt work. did the port forwarding thing.
i setup the static ip, i tried putting the host pc in the dmz, and still nothing. i tried disabling the host pc's firewall, and nothing.
in remote desktop mobile, im putting in the public ip of the host pc, and have tried filling in the username and password fields, and also tried leaving them blank.
any ideas?
Click to expand...
Click to collapse
if its workin from inside your network, your PCs set just fine...so it must be the firewall or port forward on your router...
double-check that 3389s alowed through its firewall
and
the forwards set to point UPD+TCP on port 3389 to the current internal IP of your PC.
tbh, I cant think of much else but let me know how you get on
ah, got it working. had to forward from ANY -> 3389, not 3389->3389. duh. works now.
thanks guys
Strange, you shouldn't have had to. RDP defaults to 3389 so the client should be using that from the word go (I know mine do!)...it could be a wierd router thing.
Depending on the exact option(s) you had to change to get it going though, it's making your machine a little more open to the outside world. but maybe not in a huge way....
(so, is it now AnyIP:AnyPort>YourIP:3389 or AnyIp:AnyPort>YourIP:AnyPort? I think forwarding all ports to 3389 would wreck eMule!)
It's probably worth changing the port used from the default though tbh.
Your change it in the PCs registry and add ortno to the end of what you enter into the client.
(so it'd be something like 192.168.0.1:3390, for example)
Then change the rules on the router to match, of course.
'tunes

Remote Desktop PROBLEM

Hi guys, i have a problem! When i try to connect at my PC, it say that:
CANNOT CONNECT. LIKELY REASONS ARE:
1. The remote computer is not set up for this.
2. Reached the maximum number of connections.
3. A network error occured while connecting.
I insert ip name and password. Help ME!
How are you trying to connect? Remote Desktop or VNC?
Are you connected on the network via WiFi?
Is the appropriate port open from your router?
Try to turn off the firewall on your PC or open the appropriate port.
stathis95194 said:
How are you trying to connect? Remote Desktop or VNC?
Are you connected on the network via WiFi?
Is the appropriate port open from your router?
Try to turn off the firewall on your PC or open the appropriate port.
Click to expand...
Click to collapse
Remote Desktop.
Yes, i am connect on the network via WiFi
What Port i must open?
Yes firewall turn off.
What port i must open? And on what ip adress? On the PC or on the MOBILE Ip Address?
I try on Windows XP and work, but it was blocked on login to PC and say: Account Restricted..
How i can enter on WINDOWS 7 ?
Right click on Computer-> Properties....On the left side choose Remote Settings and select: Allow connections from computers running any version of remote desktop (less secure)
I do it, but nothing, doesn't work! Why?
windows 7 firewall is off?
Status Windows Firewall : Disabled.
i really run out of ideas...did you use on remote desktop the username and password you use to log in your windows 7 pc?
Try to use as username: computername\username
Nothing Would you try to enter and view setting with TEAMVIEWER?
you have to do port forwarding on your router box
3389 and 3900.. but on the xp, i not must open port..

Categories

Resources