This morning, my phone was normal. Using apps, making calls, no problems.
Then I noticed my ring tones and my notification tones wouldn't play. Since they are stored on the Micro SD card, I thought a reboot might solve the problem. After rebooting, I get the message "SD Card Damaged". So I took it out from my phone, plugged it into the computer through a USB MicroSD reader. It detects it, and from there I can see all the files stored on there.
I decided to run a Windows (7) error check test, as that usually fixes any sort of SD problem I've had. The check ran through successfully, saying it found some problems and fixed them. After that, I put it back in the phone, boot it up, but it still wouldn't access the card. Most of my apps are stored on there, so I wanted it fixed. I took out the card and ran it through windows error check once more, only this time, I checked the box "Scan for and attempt recovery of bad sectors" and hit start. Two hours later, I notice the progress bar hasn't budged from what I can only assume was 60-65%. I decided to hit "cancel" and look up some alternative methods.
Except as soon as I hit "Cancel", something went terribly wrong. The computer no longer acknowledged I had a MicroSD card inserted. I removed the USB adapter, removed the mSD, reinserted the mSD into the USB adapter, replugged the adapter in and -- same result. I restarted the computer, and while that cycle started, I placed the card back into the phone to see if it would detect it. No luck. By this time, the computer had restarted, and I tried to reinsert the card. It detects the USB Adapter, but it's as though there was no card inserted.
At this time, I scoured the web and countless forums (including these @ xda) with no avail. I tried nearly 10 different applications built solely for data extraction, but they all had the same problem: they couldn't detect the MicroSD card. My fellow I.T. coworker suggested using an Ubuntu Live CD and try their diagnostic tools; it couldn't detect it either.
Here are the specs of my setup:
Phone: HTC Desire CDMA (USCC)
Rom: Phoenix 1.4 BravoC
Card: Samsung 8GB Class 2 MicroSD (stock from US Celluar)At this point, all I'm really concerned about it just retrieving my lost data. I have important sentimental photos, and more importantly, I have important flash backups from my stock rom that I would need if I want to return my phone for warranty. Physically, the card is undamaged. No dust, no cracks, no wear & tear. Hours of googling "SD card not detected; data recovery" leads me to several unanswered problems and fake websites baiting computer illiterate people into downloading malicious software.
I've heard of solutions that involve sending a card in to have repaired, but in turn, shelling out a couple hundred. Now I'm not stupid when it comes to computers, but I'm not necessarily a genius either. I've tried several ways to circumvent this lockout issue, and I can't find any way to undo a process from the Windows error checker. Hell, I can't find any cases or threads pertaining to people having bigger problems because of the error checker.
So I call out to anyone who can help. I can buy a new card, no problem. I just need my data back. It's crucial for my phone and important for me and my memories.
Any suggestions?
Hi
My phone:
Disire HD (GSM)
Android 2.3.3
CyanogenMod 7.0.0 RC2
I had the same problem as you a few weeks ago(my phone wasn't rooted) ....
Tried different methodes to get my data back, they all didn't work.
The problem is not the phone or any app on it neither your roms are the problem,
searched the internet... and came to the solution that I was not alone with this problem. they assume this is an hardware fould in the SD card ( btw its weird that its an Samsung SD, didn't you thought the same I still dont understand...)
Anyway, my solution was going back to the shop where I got the phone (Belcompany NL) and ask there solution for the problem i lost all my pics and other importand crap haha..
They didn't had a solution or something, just giving me a new one.. so I got a new SD Card (for free )
But lost all my data
You know if a partition messes up, which it has done because you didn't let it finish, there is like 0% chance that you can recover any data on your SD card. You should of backed your card up before you attempted to even start doing a disk check. As for getting your SD back up and running, you can try gparted live cd and see if it will detect it in that. If so just repartition it, but next time, let it do a thorough disk check and finish. Checks can take hours and hours because it is doing something. Just backup your SD card frequently.
I've decided to purchase a new card rather than hassle with unrooting my phone for the sake of going back to the USCellular repair (on just a whim that they may replace the card).
I've heard that I need to be careful when choosing a brand of MicroSD cards. Transcend is a no go. But what about this: An 8GB A-DATA Class 6 MicroSD card?
From what I've gathered, A-DATA is a reputable brand, and it shouldn't really cause problems in my HTC Desire, right?
Related
Hi Guys, before hand great forum. Anyway, I've had my Hermes/ 2gb Sandisk Memory Card for about a year now. I've had absolutely no problems with it up until now. I upgraded to WM6 about 2 weeks ago, and everything was fine.
ANYWAY, My storage card is not recognized, I tried cleaning it, I tried using WM5Storage, nothing. When I am in finder, and I put in the disk, it seems to act as if something was placed in with a quick like flash of the screen indicating something was place, but nothing in finder. I tried to see if I could format it, however it acts like nothing is in there?
Any suggestions, Thanks again for your time.
http://forum.xda-developers.com/showthread.php?t=294324
It sounds like the disk has failed. Try to read the disk in another reader to check that the disk has not fried it's self.
If this is the case then you may be able to return to the manufacture if it has a life time warrenty. I.E. Kingston have this feature.
Hope this helps.
D
I agree with the above post. Try inserting your card into your computer, and see if it can be recognized that way. If so, maybe copy all of your data off the card, use Windows to format the card (FAT or FAT32 only), and move your data back. Good luck.
Help! I have an XDA IIs which was working fine for the last two years. It has a 1GB SD Card in there. I used it for TomTom all this time, with no problems at all.
A couple of days ago, I forgot to grab my device from the car as I was in a rush and I left it in the car (powered off, but with TomTom running) most of the day.
When I got back in the car, TomTom wasn't working right so I closed it and tried to re-open it, whereupon I received the nasty message "Cannot determine location of data".
To put it simply, the device no longer recognises the presence of an SD Card! It's not in File Explorer, nor under Settings / Memory / Storage Card.
What is going on?
Here's a list of what I've tried already (none of these ideas has solved the issue):
o Tried a different SD Card
o Tried a soft reset on the device
o Tried a hard-reset on the device
o After hard-reset, tried a restore from a recent Active Sync backup-to-PC.
o Downloaded PocketPC Mechanic and played around A LITTLE (didn't do anything that seemed dangerous like defragging, registry cleaning, etc)
Any help will be VERY gratefully received!
Thanks
Matt
Update... but still have problem
Quick update
I also tried formatting the SD Card. No help (I have since copied all data back onto the card and it still doesn't work).
mattyboy said:
Quick update
I also tried formatting the SD Card. No help (I have since copied all data back onto the card and it still doesn't work).
Click to expand...
Click to collapse
Apparently, the motherboard your device is dies slowly.
Have you tried a diifferent sd card? reinstalling the software all over again?
Replying to Rafa1215
Yes, I have tried a different SD Card (as noted in the original post, list of things I have tried). It's a 128MB one which works fine in the SD Card reader slot on my PC (my main 1GB card works fine in PC slot as well).
Here's a further titbit of information which may or may not be useful in helping me:
I've tried several times to restore the backup-to-PC I made at the end of April (essentially the same stuff on the device then as now, luckily). Normally, when you insert (or remove) the card, it turns the screen on. Each time I perform the restore (of the same backup, over and over again), the SD Card slot actually performs this function when I insert the card again - but ONLY ONCE each time I restore from backup.
As for reinstalling software all over again... I have performed a hard-reset on the device, and tried the card as soon as it is ready to use... no luck there either.
In reply to vovaxxxx:
Is that a serious comment? The motherboard slowly dies? If that's true then this device is fit for nothing but the rubbish bin!
More ideas are welcome please, I thank you for the feedback!!
If you're luck enough to have a friend that have a BA you could test his sd card on your BA and your sd card on his BA. If his BA can read your card and yours can't read his then you have 2 situations:
1) Your sd card slot is dirty or slightly melted so you have no good contacts, try to clean it.
2) Time to buy a new phone or try to buy a new circuit board for your phone but for the price I think is better you get a new phone.
Edit: If you have $100 you can get a new circuit board here: http://forum.xda-developers.com/showthread.php?t=310283
search google for panasonic sd formatter or something like this, this is a lil program which is used to format your SD properly. Insert your SD card into the card reader, start the program and reformat the SD card.
The problem is within the SD card file system
xplode said:
search google for panasonic sd formatter or something like this, this is a lil program which is used to format your SD properly. Insert your SD card into the card reader, start the program and reformat the SD card.
The problem is within the SD card file system
Click to expand...
Click to collapse
If that doesn't work try
Storage Tools by softwinter.com
You can at least do a Scandisk and fix any errors during the scan
OK I formatted the SD card with the Panasonic formatting utility. (Backed everything up to the PC first, from the card!)
Still no difference. To reiterate - the SD Card(s) I am trying to use are working fine in my PC's SD Card reading slot.
I think it's the hardware (i.e. the XDA itself)... LGSilva says I could try cleaning the contacts. Any recommended ways on doing this? The slot is too small to get any kind of decent cleaning implement in there, and I can't dismantle the device because it's held together with special screws (6-pointed-star-shaped heads).
Hi
the company i work for has around 300 device and this happens every now and again. not sure if this will help but normally call our mobile network and get a replacement. it's normally the card reader in the device.
mattyboy said:
The slot is too small to get any kind of decent cleaning implement in there, and I can't dismantle the device because it's held together with special screws (6-pointed-star-shaped heads).
Click to expand...
Click to collapse
The screws are size 6 Torx bits, suitable sets of these drivers can be bought from Maplins in the UK, although you don't mention where you are located.
There is also a guide to taking the BA to bits in the WiKi and a very comprehensive one containing pictures etc. at the bottom of the WiKi page, well worth reading both before you try taking it to bits - Mike
This may be the wrong place to ask this, and if it is, I apologize.
I also apologize for this being so long, but I wanted to include as much info as possible in case someone has a solution I haven't tried yet.
I have a Sandisk 32gb micro SD in my S3 (AT&T, rooted, running StockMOD 4.4 RC 2). The card worked perfectly fine before all of this started.
I ordered a new (generic) 64gb micro SD card through Amazon about a month ago. When I tried to copy my data to it, I got a 0x80070570 error, which seemed to point to a card defect. I sent it back, and finally got a replacement.
I unmounted the old card and put the replacement card in my S3. The new card didn't register in the phone at all.
I popped it out (the phone didn't recognize it, so I couldn't unmount it), put it in a USB card reader, and plugged it into my desktop (Windows 7 Home, 64 bit). The card said that it was formatted to FAT32. Since windows doesn't give you the ability to format to FAT32, I tried exFAT. I figured at the worst, when I put it in the phone, the phone would not recognize the file structure and give me the option to format it.
Well, a quick format didn't work (Windows said it was unable to complete it.) I tried a full format and when it got to the end, Windows said it couldn't complete that either. I put it back in my phone and it was recognized with a "blank card or unrecognized file system" error. It gave me the option to format it, so I did. After a maybe 2 seconds, the phone said it was checking the card for errors, then gave the "blank card" message again. I tried several times, but the same thing happened. I rebooted into recovery (CMW 6.0.4.7) and it seemed to show the card. I tried to format it there, but got the message "could not format /storage/sdcard1". I tried to mount it and got a "error mounting /storage/sdcard1" error.
I put the card back in the reader and my computer doesn't see anything there anymore. No drive letter. Nothing showing up in disk manager. I can't see it through diskpart's list volume or chkdsk (all run with admin privileges.) If I take the card out of the reader, the reader shows up as drive H (in all places). But once I put the card in, the drive disappears from everywhere.
So I figure I got another bum card. I put the old micro SD card back in my phone and it didn't see it. There's no message - the phone just doesn't recognize anything there. I rebooted, but still nothing. I booted into recovery and CMW doesn't see the old card, even though it worked perfectly fine up until this point. I tried wiping the cache and dalvik, but that didn't change anything. I booted without a card, inserted it, and the phone doesn't see it. I booted with the card in the phone, and it doesn't see it. I booted without a card, shut it down, inserted the cart, and rebooted, and that didn't work. The only thing I haven't tried yet is a factory rest. I put the old card in the reader and my computer doesn't see anything (just like the new one.) I tried disk manager, diskpart, chkdsk, etc. and it doesn't show up.
I tried 2 different card readers (1 USB, 1 internal) and neither reads either card. I tried 2 different micro SD to SD adapters, and neither one helps. I've tried reading the cards on 2 different computers, but neither sees either card. I found an old 2 gb micro SD card, plugged it into the USB adapter and it shows up in both computers fine. I tried both adapters and both work fine with the 2 gb. I also put the 2 gb in my phone, and it worked fine. So I think it's pretty safe to rule out an issue with the computer, the phone, the adapter, and the reader. Which leaves me with a card problem.
All of the solutions I've found online require that the computer actually assign a drive letter and see the card, even if it can't read it. I don't have that, so none of those work for me.
I get that the new card was probably a bum card. But why would my old card crap out all of a sudden? I had just taken a backup of what was on there, so it worked in the reader 30 minutes before I swapped out cards. I've inspected the contacts and they look fine to me. No scratches or crap on there.
Does anyone have any suggestions on how to get my 32 gb working again? Losing data isn't a problem, since I backed it up before I started this whole thing.
I've pretty much given up hope on the 64 gb at this point.
Really hard to say. But just a guess, maybe the card reader caused some sort of damage to the card. Would explain why both the new ones didn't work either.
Like I said though, it's purely a guess. But if windows doesn't recognize it no matter how you plug it in, I'm not sure there will be much you can do.
And just FYI, since this is a question, it should've been posted in Q&A.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Thanks, @DocHoliday77. I was afraid of that. Even though I don't see any damage it's possible something happened. I don't know.
I was just hoping that there was some kind of software that might be able to access the card without checking the file structure. Something that could format it without knowing, or caring, what was on it before.
And thanks for the heads up on where this should have been posted. Next time I'll ask my questions in Q&A.
Could be something internal that allowed too much power to the card maybe. No way of knowing that I'm aware of. There may be recovery software out there, but it may cost more than its worth or it may require special equipment. Been a long time since I've looked into that type stuff though.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
I am having issues with a Sandisk memory card on my Note 2. For whatever reason, it stopped working- like completely. I can't format it, I can't delete anything off of it, or put anything on it. I haven't write protected it either, which I found odd whenever I went to troubleshoot it on my computer. I have even tried the Command Prompt method of troubleshooting/formatting- but with no results whatsoever. I read online that ALOT of users are having the same problems with their SD Cards out of nowhere, because of an update (my phone is rooted and on 4.1.2 and hasn't been updated).
Might I also add, that when the SD Card stopped working, I noticed that there were extra files put on there that weren't originally there that are from Android (such as google.music and such) and I know I didn't put that on there. I'm just wondering if anyone has found a fix to this? I've tried everything, but I feel as if my SD card is shot (my phone automatically updates apps and such and I'm quite confident it did the same to my External SD Card as it has with other people). I just have alot of things on my phone I need to add for work, and it's super inconvenient that my phone is only 8GB and has a 60GB SD Card with the potential to work again. I would buy another card, but I wouldn't want to spend the money on one, just for something like this to happen again if you know what I mean, lol.
Hey guys and girls!
This morning my phone turned off by itself (13% battery left) and needed somewhat longer than usual to reboot (in the meantime I plugged it back in to the charger). First thing I noticed was that my whole theme got reset as well as it started showing me introductional tips ("long press here to move your apps to the homescreen, ecc.). It also started to update apps in the Play Store even though I set it to manual ... so basically a LOT of things were reset.
The biggest problem I'm having now is though that all my files (pictures, videos, music) that are stored on an external micro SD card are corrupt. It's not possible anymore to open anything. I already removed the micro SD card and put it into an adapter to have a look at the files via the laptop. But nothing, even though the sizes of the files seem OK, I can't open them.
Does anyone have a clue as to what exactly happened here? Are those files lost (at least of some I have a backup) or is there anything I can do to "repair" them? Help is really appreciated, thanks!
PS: Things like the card unmounting and re-mounting never occurred. So I can't tell if the card was dying or if actually the phone ruined my files.
Did you happen to be using a SanDisk SD Card? I've had my 10 brick 2 of those until I switched to Samsung SD Cards about a year ago and haven't had issues since.
I never could manage to recover files from the damaged SD cards.
I have a Samsung SD card and had something similar.
I guess I was on Viper Rom and basically my phone restarted around 15-20% of battery. After a long wait for booting back again, all my settings were gone.
Files and others in the SD card was okay but basically until I formatted the card, I wasn't able to boot into the Download Mode to install a new rom...
I fixed the restart issue by installing the official HTC Rom.
Thanks for your replies.
It is indeed a SanDisk 16GB card. It seems though that the card is still working (no problems accessing it via phone or laptop), just the files appear to be broken. In the meantime I also tried apps like PC Inspector File Recovery, but to no success
I'm still on stock HTC Sense by the way, no root, nothing.
Anyone know though why that happened (resetting everything, etc.)?
Hit me with a PM I'll give you a SanDisk restore tool which works quite ok. there is a huge chance some files can be recovered, some will be damaged though. Don't push any new files on the card after you tried to restore the files
HTC 10-Corrupted microSD card
I know this is an older thread, but I was wondering if there is a solution. I have an HTC 10 which has an micro SD card in it, that is "married" to the phone. When connected to a computer, the computer recognizes the phone, and the microSD card, and begins to load the folders/files. Eventually this process stalls, and the phone/drive is no longer readable by the computer. To get the computer to recognize the phone/card again, I need to restart the phone, but the same thing happens again.
I have like 20gigs of data on the card, and cannot just put the card in a reader, because it's encrypted to the phone. Any possible solutions? It's frustrating to see the files/pictures for a minute or two, and then have them disappear. I have tried copying/pasting the files while they're visible, but this often triggers the computer to no longer recognize the phone/memory card. I've tried to un-encrypt the microSD card, but the phone can't recognize/access the microSD card long enough to complete that process.
Please help if you can.
Glenn