Notes:
Click to expand...
Click to collapse
This build is a rework/continuation of MDJ Froyo Sense Revolution series
If m-deejay decides to update his original build, I will discontinue this build
Use this at your own risk. I will not be accountable if this causes you phone to fail, or you lose your data. The backup of your data is your responsibility.
I am a newbie to the android development, so please be patient with fixes and releases; and your help and advice will be appreciated.
Finally: Please, Click Thanks if you appreciate the build, and all works.
Kernel Usage
Click to expand...
Click to collapse
The kernel used in this ROM is based on MDJ S9.2, and have ported it, and have patched to the latest upstream with a lot of fixes Just to confirm, this kernel was originally S9.2 from MDJ, so up until then all credit is to him
The git is available here, check logs and diffs for the changes made. There is a neat build script to get it compiled for yourself if you want as well in Linux or cygwin. I am using the test branch at the moment.
ROM Links
Click to expand...
Click to collapse
I have tested an upgrade myself to these releases myself, and have not encountered any problems. But everyones setup is different, the upgrade process may work for you. But would recommend to do a NAND backup before you do. FINALLY, I will not be held responsible if you lose any data.
DFT releases will not be provided, so DON'T ask
The build of this ROM is available here, If anyone wants to have play with this build, then feel free to checkout the repository by running the following command in Linux. This will grab the whole repository onto your machine.
Code:
git clone http://github.com/arif-ali/android_leo_fsr.git
Froyo Sense Revolution 2.5.1 NAND CWM MAGLDR, Click or scan the image
Froyo Sense Revolution 2.5.1 NAND CWM cLK, Click or scan the image
Forum Links
Click to expand...
Click to collapse
ClockworkMod HowTo
cLK howto
config.txt Howto
Click to expand...
Click to collapse
ppp_mode - set PPP or not, valid values 1 or 0 (not for cLK)
gps_zone - zone from pool.ntp.org, values may be uk, us, europe etc... check pool.ntp.org, for all possible values
example config
Code:
ppp_mode=1
gps_zone=uk
cLK Howto
Click to expand...
Click to collapse
Download the attached cLK1.3.3_system_250M_arif-ali.zip, or cLK1.3.3_system_210M_arif-ali.zip
turn phone on with volume down key, so that it is in SPL
install cLK by double-clicking CustomRUU.exe
To install recovery download the correct one from post #2 of cLK thread (link below)
reboot phone into fastboot by keeping the back key pressed
flash recovery by running "fastboot flash recovery recovery.img"
How To (CWM - MAGLDR)
Click to expand...
Click to collapse
Make sure you have partitioned the SD card correctly (ext partition, and a vfat partition)
Make sure you have followed the ClockWorkMod Howto to add the recovery to the phone (see links in the thanks/credits section)
Download the link above and put it into the vfat partition, maybe in a folder called ROMS
Boot phone into MAGLDR by holding on the Red button/close call
Select AD Recovery (Option 8)
Select Install zip from sdcard
Select choose zip from sdcard
Select the ROM from the SD
Select Yes to install the zip
reboot the phone and enjoy
How To (CWM - cLK)
Click to expand...
Click to collapse
Make sure you have partitioned the SD card correctly (ext partition, and a vfat partition)
Download the link above and put it into the vfat partition, maybe in a folder called ROMS
Boot phone into fastboot by pressing the back key
flash the recovery using "fastboot flash recovery recovery.img"
reboot phone into cLK recovery by holding on the Home key
Select Install zip from sdcard
Select choose zip from sdcard
Select the ROM from the SD
Select Yes to install the zip
reboot the phone and enjoy
Howto ROM Manager
Click to expand...
Click to collapse
After booting into the phone, you need to create the following file on your sdcard, and reboot the phone. Hopefully after this, your phone should work.
Code:
/sdcard/clockworkmod/.settings
with the following contents
Code:
{"is_clockworkmod":true,"current_recovery_version":"3.0.1.9","readonly_recovery":false,"recovery_timestamp":1300214577721,"flash_recovery":"flash_image recovery %s ; ","reboot_recovery":"","detected_device":"leo"}
I will attempt to get this added in the next release
Please READ!!!
Click to expand...
Click to collapse
make sure that any app that you do install move it back to the phone, and that will automatically reside on the SD card in the ext2/ext3/ext4 partition
For the this ROM 210 MB in /system, So you need the Recovery_250M from the RaiderX303's thread
To Do List / Work in-progress
Click to expand...
Click to collapse
v2.6
Fix AudioFlinger Issue
Fix volume issues
Add Stock Theme Option
Thanks/Credits
Click to expand...
Click to collapse
m-deejay (ROM & kernel)
Cotulla (MAGLDR, HSPL)
kholk (Radio)
RaiderX303 (ClockworkMod)
birkoffsjunk (img2cwm)
tkirton (dtapps2sd)
cedesmith (cLK)
letama (ril_wrapper)
#htc-linux and #htc-linux-chat
All ROM users
Screenshots
Screenshots
Changelog
v2.5.1(25/03/2010)
new kernel AA 0.5 (see kernel changelog for details)
support for ROM Manager if using cLK
Add latest ROM Manager to cLK build
update to cLK 1.3.3
cache moved to mtd cache
Add ES File Explorer
Update gmail, youtube apks
v2.5(13/03/11)
added cLK support
moved AA 0.3 kernel
added PPP support
added config.txt support
fixed APN issue in framework
Initial Release (by me)
Downloading & try soon
chairman_palm said:
Downloading & try soon
Click to expand...
Click to collapse
Any feedback?
Update to 2.5.1
Updated, highlights below,
* new kernel AA 0.5 (see kernel changelog for details)
* support for ROM Manager if using cLK
* Add latest ROM Manager to cLK build
* update to cLK 1.3.3
* cache moved to mtd cache
* Add ES File Explorer
* Update gmail, youtube apks
enjoy
Ok I am jumping on board and will give this ROM a try will give feedback in a few hrs after ROM has settled in
Update: ROM loaded and runs really smooth, picture messages are blurry - only allows a max 300k message size
added English (US) through MoreLocale2 app
I know this is a work in progress so keep up the great work arif
Update 27Mar11 -
have been using this ROM just over 24hrs and so
fare not to bad
Battery drain is a little higher than what I am used to
Have to remember to us speaker phone when I make first
call after reboot due to Robot voice and subsequent freezing of my phone if I fail to do so.
Also have periodic data connection failure of which I do not
experience on my other HD2 with a diff. ROM.....This was just FYI and not meant to degrade your hard work Arif
stock theme
Here is an initial attempt at doing the Stock theme
http://www.multiupload.com/LL8NO4MB13
feedback would be great
Why sdext doesn't work? I have properly partitioned card which works with other roms, but here my phone states that I have 3mb free space after install. I even re partitioned card without success.
maxld said:
Why sdext doesn't work? I have properly partitioned card which works with other roms, but here my phone states that I have 3mb free space after install. I even re partitioned card without success.
Click to expand...
Click to collapse
Have you used the required config.txt?
Sent from my HTC HD2 using XDA Premium App
Honestly I tried to find it but I'm so blind that I did it without it. Thanks for the help mate.
Edit:
I searched again and still can't find it. Could you upload me one?
maxld said:
Honestly I tried to find it but I'm so blind that I did it without it. Thanks for the help mate.
Edit:
I searched again and still can't find it. Could you upload me one?
Click to expand...
Click to collapse
Look at the first post it tells you how to create one. Its simple open note pad on your computer put in the right details and save it as config.
Sent from my HTC HD2 using XDA Premium App
Yeah, i have read it, but there are only ppp and gps options listed.
maxld said:
Yeah, i have read it, but there are only ppp and gps options listed.
Click to expand...
Click to collapse
Okay try this in create the config.txt like I said and in it put a2sd_mode=data
Sent from my HTC HD2 using XDA Premium App
Thank you kindly for your help, sir. Unfortunately it didn't help, maybe OP will have a trick how to activate sd ext partition.
maxld said:
Thank you kindly for your help, sir. Unfortunately it didn't help, maybe OP will have a trick how to activate sd ext partition.
Click to expand...
Click to collapse
* create a file called config.txt
* add the following contents to the file
a2sd_mode=data
* run "adb push config.txt /sdcard/."
* reboot your phone.
If this doesn't work, then run the following commands
adb shell ls -l /dev
adb shell mount
adb shell df
and let me know the results
Thanks, I'll report results in a moment.
Edit 1: It will be a longer one, because my connection is ridiculously slow and I have to download sdk and jdk
Edit 2: None of your advices helped, still have 3.85 MB of free space.
Anyone have the new version?
giorgib said:
Anyone have the new version?
Click to expand...
Click to collapse
What do you mean writing "the new version"?
There isn't a new version yet, and haven't planned one as yet. But I have some ideas that I wanted to try to fix some of the issues that this ROM has
Most of my time has been spent on doing the CM nightlies and the CWR updates, and getting RM support for the leo. But I will see when I can get time out to do an update here as well.
Related
This ROM is based on Cotulla's original NAND release with a few changes, the main one being that this is the first ROM that can be flashed using ClockworkMod Recovery.
How to flash;
1: Boot into Clockwork Recovery
2: Select flash zip from sdcard
3: Select ROM file and then confirm
4: Wait for All Done! message
5: A wipe is recommended but not always required, if you experience force closes or things not working, try wiping before posting problems.
Changelog;
-v1.0- Initial Release
-gauner1986 Kernel from Desire HD rom release
-RMNet by default, create ppp folder in system to enable PPP data
-SU Fully working
-Flashable ONLY with clockworkmod recovery found HERE
-DOWNLOAD-
*CACHE FIX IS REQUIRED TO INSTALL APPS*
-Cache Fix-
THIS ROM IS ONLY FLASHABLE USING CLOCKWORKMOD RECOVERY FOR HD2 FOUND HERE
Credits to;
Cotulla + DFT - For the base ROM and all the great work thats gone into NAND on the HD2
Gauner1986 - For the kernel used in this ROM
CyanogenMod Team - For the great recovery that allows flashing custom roms
Anyone else who has contributed to android on the HD2
RaiderX303 said:
This ROM is based on Cotulla's original NAND release with a few changes, the main one being that this is the first ROM that can be flashed using ClockworkMod Recovery.
How to flash;
1: Boot into Clockwork Recovery
2: Select flash zip from sdcard
3: Select ROM file and then confirm
4: Wait for All Done! message
5: A wipe is recommended but not always required, if you experience force closes or things not working, try wiping before posting problems.
Changelog;
-v1.0- Initial Release
-gauner1986 Kernel from Desire HD rom release
-RMNet by default, create ppp folder in system to enable PPP data
-SU Fully working
-Flashable ONLY with clockworkmod recovery found HERE
-DOWNLOAD-
-
*CACHE FIX IS REQUIRED TO INSTALL APPS*
Cache Fix-
THIS ROM IS ONLY FLASHABLE USING CLOCKWORKMOD RECOVERY FOR HD2 FOUND HERE
Credits to;
Cotulla + DFT - For the base ROM and all the great work thats gone into NAND on the HD2
Gauner1986 - For the kernel used in this ROM
CyanogenMod Team - For the great recovery that allows flashing custom roms
Anyone else who has contributed to android on the HD2
Click to expand...
Click to collapse
Very nice, thanks for the update.zip.
Thank you
SOOOOOOOOOOOOOOOO much!
As
for the cache fix. Do I flash directly after the ROM?
jhr5474 said:
for the cache fix. Do I flash directly after the ROM?
Click to expand...
Click to collapse
yes, just flash the rom then the cache fix
work very well
RaiderX303 said:
This ROM is based on Cotulla's original NAND release with a few changes, the main one being that this is the first ROM that can be flashed using ClockworkMod Recovery.
How to flash;
1: Boot into Clockwork Recovery
2: Select flash zip from sdcard
3: Select ROM file and then confirm
4: Wait for All Done! message
5: A wipe is recommended but not always required, if you experience force closes or things not working, try wiping before posting problems.
Changelog;
-v1.0- Initial Release
-gauner1986 Kernel from Desire HD rom release
-RMNet by default, create ppp folder in system to enable PPP data
-SU Fully working
-Flashable ONLY with clockworkmod recovery found HERE
-DOWNLOAD-
*CACHE FIX IS REQUIRED TO INSTALL APPS*
-Cache Fix-
THIS ROM IS ONLY FLASHABLE USING CLOCKWORKMOD RECOVERY FOR HD2 FOUND HERE
Credits to;
Cotulla + DFT - For the base ROM and all the great work thats gone into NAND on the HD2
Gauner1986 - For the kernel used in this ROM
CyanogenMod Team - For the great recovery that allows flashing custom roms
Anyone else who has contributed to android on the HD2
Click to expand...
Click to collapse
Too F'ing fast RAIDER! Thanx.
how do I convert it to ppp?
I used the search optiion, believe me. All I found was ppp to rmnet because of the early on data disconnects. Could you guys help? Thanks in advance.
elcanela said:
I used the search optiion, believe me. All I found was ppp to rmnet because of the early on data disconnects. Could you guys help? Thanks in advance.
Click to expand...
Click to collapse
the first damn post said:
-RMNet by default, create ppp folder in system to enable PPP data
Click to expand...
Click to collapse
In a terminal emulator or adb shell.
Code:
su
mkdir /system/ppp
elcanela said:
I used the search optiion, believe me. All I found was ppp to rmnet because of the early on data disconnects. Could you guys help? Thanks in advance.
Click to expand...
Click to collapse
youll need to use adb and
adb remount
adb shell mkdir /system/ppp
Click to expand...
Click to collapse
or in terminal emulator
su
mount -o rw,remount /system /system
mkdir /system/ppp
Click to expand...
Click to collapse
the initrd and the zimage on the sd card is needed for CW or its a zimage files for your zip rom?
its question becouse you write its gauner kernel from HDrom, and he have in gauner hd rom 0.3 kernel with OC to 1113mh... can i replace the zimage from the sd card with this one and its allready replace in system?
ilijan said:
the initrd and the zimage on the sd card is needed for CW or its a zimage files for your zip rom?
its question becouse you write its gauner kernel from HDrom, and he have in gauner hd rom 0.3 kernel with OC to 1113mh... can i replace the zimage from the sd card with this one and its allready replace in system?
Click to expand...
Click to collapse
the zImage on the SD is for CWM recovery, not the ROM, the zImage for the rom is in the boot partition on the NAND
shadiku said:
In a terminal emulator or adb shell.
Code:
su
mkdir /system/ppp
Click to expand...
Click to collapse
Damn, I feel like an A$$! Didnt think it was that literal, I thought you had to drop certain files in there, but I will just make one with SUFBS. Thanks.
ok so if i want to replace zimage i need to go with install.bat wia adb? or its possible with cw?
Well even though I hate Sense.. I have to flash something with Clockwork. Here we go.
ilijan said:
ok so if i want to replace zimage i need to go with install.bat wia adb? or its possible with cw?
Click to expand...
Click to collapse
I think we can change in zip file : boot --->zImage and /system/lib/modules ----> ..
wait for RaiderX303 confirm this method again.
ilijan said:
ok so if i want to replace zimage i need to go with install.bat wia adb? or its possible with cw?
Click to expand...
Click to collapse
boot into CWM, then using adb run these commands
adb shell mount /dev/block/mtdblock2 /boot
adb push zImage /boot/zImage
adb reboot
Click to expand...
Click to collapse
or just change the zImage in the cache fix zip file and reflash
canot install mdj 9.2 oc rom becouse its canot mount boot block mtdblock0
thanks so much! its work just edited install_ kernel.bat and its allready replace the zimage
@raiderx
hmmm is it possible to use your .zip and swap the system folder with a cm6 system folder+nand kernels and flash from there?
in theory its possible but asking first before my phone becomes a ticking timebomb
does it need to be signed?
DiscontinuedI'll make this short and sweet. Thanks to RaiderX303 recent work porting over clockwork recovery we can now flash roms in the update.zip format directly from sd with no need for a pc to flash a new rom. This allows most importantly the ability to to create Nandroid backups and restores.
Using RaiderX303 method I repacked my favorite ROM into a zip package ready for Clockwork Recovery.
Rom is Kouno.Takaaki's HD2ONE 0.3.6. This is based on his original release and everything should work just as it did before on this rom.
Please don't ask questions as to why this doesn't have xyz, or sense this or that, this is a close to stock vanilla android mod, if you want pretty sense skins, or don't like the way it looks, then get a sense rom.
His original thread http://forum.xda-developers.com/showthread.php?t=823471
Intrid.gz is updated to his newest version as of 1.2, details here http://forum.xda-developers.com/showthread.php?t=898067
Kernel is now Prj's .3, which is based off Hastarin's 8.6, modified for nand use. Feel free to update using the method in the Intrid.gz thread if you want a different kernel.
First you need to install clockwork recovery which has been ported by RaiderX303...
http://forum.xda-developers.com/showthread.php?t=898913
Then ...
How to flash;
1: Boot into Clockwork Recovery
2: Select install zip from sdcard
3. Select choose zip from sdcard
4: Select ROM file (HD2ONEupdate.zip) and then confirm
5: Wait for All Done! message
6: A wipe is recommended but not always required, if you experience force closes or things not working, try wiping before posting problems.
Please remember, I am not the original chef for this ROM, I have only repacked it into a format suitable for clockwork recovery so keep questions related to the underlying rom to the original forum. Also if you haven't read anywhere else, when you switch over to clockwork recovery method your userdata will be wiped so backup accordingly.
Download Link:
V. 1.2 http://www.multiupload.com/86KDPU1BXO
Wifi Tether App: http://www.multiupload.com/XVVRIFG83F
V. 1.1 http://www.multiupload.com/UR329DN289
V. 1.0 http://www.multiupload.com/06Q70SASLA
Changelog:
Version 1.2 01/07/2011
-Problems with intrid.gz not recognizing /.data/config.txt should be resolved. Changes to config.txt should now work properly.
-Kernel updated to prj's .3
Version 1.1 01/05/11:
-Updated Intrid.gz to Kouno.Takaaki v1.1 Ramdisk(should make update systemfiles,kernel,etc easier) See original thread for more details http://forum.xda-developers.com/showthread.php?t=898067
-Added Google Talk app and Google News/weather widget to systemapps as not downloadable from market, for all other google apps, ie. gmail,youtube, etc, download the newest version from market.
-Small modification to default MMS settings for Tmobile US users to fix mms send issues. If creating new data img settings will load by default, otherwise goto settings,wirelessnetworks,mobilenetworks,accesspoint names, menu button, reset to default, this will get you updated mms settings for tmobile us.
-If coming from 1.0 you should be able to do a no wipe update in recovery without problems.
Verson 1.0 01/04/11:
- Initial Release
Credits to;
Kouno.Takaaki for his Rom
RaiderX303 for his work on porting Clockwork Recovery
Cotulla + DFT - For MAGLDR and all the great work thats gone into NAND on the HD2
CyanogenMod Team - For the great recovery that allows flashing custom roms
Anyone else who has contributed to android on the HD2
Thanks, wanna try..
What a beautiful day
what initrd and zimage did you use for this rom.zip?
thanks..
rmnet or ppp? thanks!
Hi, I try to change the density with 200 in /system/build.prop. But it is not work when I restart my phone?
Is there a problem? I saw that the rom is based on CM build. But I can change it on CM 6.1.1 build. Could you please help me to take a look?
flashed fine but then just sits at the green htc screen...
did hard reset..same thing...boots to green htc screen.
thnx to titanium backup im back where i started 15 mins later
Does it support data.img on sdcard?
tried this but getting a nand kernel open failed when magldr tries to load the rom any ideas?? Do i have to supply my own kernel??
Ricey
Ok to address some questions and issues.
Build is RMNET, again based on original Nand HD2ONE.
Kernel is proj .2 which is based off of Hastarins Kernels.
Intrid is also from HD2ONE nand build so... it supports data.img to sd (off by default), therefore you must create a folder in the root of your SDcard and do the following:
Name folder. ".data"
Inside ".data" , Name a new txt file "config.txt"
Then you can add any of the following lines:
data2sd=0
- default nand userdata
data2sd=1
- enable data.img support
data_size=512
- size of data.img, only work when data.img support enabled
- default 512
lcd_density=240
- change the size of icons
- default 240
gps_zone=us
- country code, us, fr, jp, etc
- default us
As for people having issues booting or getting stuck at green htc, I would give a few pointers, if first boot then keep in mind the build is creating a new data file and first boot could take 10 minutes, so be patient. Second if getting issues with magldr saying it can't load a particular file/kernel, you probably had a bad flash and I would start by doing a wipe within clockwork recovery and reflash.
bigfoots1 said:
flashed fine but then just sits at the green htc screen...
did hard reset..same thing...boots to green htc screen.
thnx to titanium backup im back where i started 15 mins later
Click to expand...
Click to collapse
Fix permissions after flashing could help
Works just as HD2ONE should - flawlessly Thanks a lot
ok, I thought i had waited 10 minutes...
wasnt sure if it was building or not.
i will try again and wait it out.
like i said titanium backup to the rescueif needed anyway...
Thank you!
drewestate said:
Ok to address some questions and issues.
Build is RMNET, again based on original Nand HD2ONE.
Kernel is proj .2 which is based off of Hastarins Kernels.
Intrid is also from HD2ONE nand build so... it supports data.img to sd (off by default), therefore you must create a txt file in the root of your SDcard and do the following:
Name new txt file ".config" (without quotes)
Then you can add any of the following lines:
data2sd=0
- default nand userdata
data2sd=1
- enable data.img support
data_size=512
- size of data.img, only work when data.img support enabled
- default 512
lcd_density=240
- change the size of icons
- default 240
gps_zone=us
- country code, us, fr, jp, etc
- default us
As for people having issues booting or getting stuck at green htc, I would give a few pointers, if first boot then keep in mind the build is creating a new data file and first boot could take 10 minutes, so be patient. Second if getting issues with magldr saying it can't load a particular file/kernel, you probably had a bad flash and I would start by doing a wipe within clockwork recovery and reflash.
Click to expand...
Click to collapse
15 minutes and counting...still sitting on green htc screen...
please explain...
if there are extra steps needed then why isn't that mentioned prior to this?
schremer said:
Fix permissions after flashing could help
Works just as HD2ONE should - flawlessly Thanks a lot
Click to expand...
Click to collapse
Since this incorporates Clockwork Recovery, can this now be used to swap kernels as well?
25 minutes at the green htc screen. I think its safe to say this has nothing to do with the data file be created. it doesn't work.
followed instructions, it flashes the zip and after reboot it just sits at htc screen...
I think im done messing with this untill i see others who have actually got this to flash and boot properly...
if there is another step then please state it...nebulous comments like "change permissions" are useless
Thanks..
bigfoots1 said:
please explain...
if there are extra steps needed then why isn't that mentioned prior to this?
Click to expand...
Click to collapse
It depends Owning android phone before used to fix permissions after flashing.
Sent from my HTC HD2 using Tapatalk
This build is freakin good
But I have a little problem with me settings.. if I want to go to settings -> sounds the whole settings fc
Tried it with fixin the permissions in the CW mod, but didn't work.. someone else has this issue?
lol..so basically your talking out your ass?
schremer said:
It depends Owning android phone before used to fix permissions after flashing.
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
bigfoots1 said:
lol..so basically your talking out your ass?
Click to expand...
Click to collapse
I'm not sure if understood you right. Anything personal?
Notes:
Click to expand...
Click to collapse
This build is a rework/continuation of MDJ Revolution series
I started this thread, as there was some demand for this to get updated. If m-deejay decides to update his original build, I will discontinue this build
Use this at your own risk. I will not be accountable if this causes you phone to fail, or you lose your data. The backup of your data is your responsibility.
I am a newbie to the android development, so please be patient with fixes and releases; and your help and advice will be appreciated.
Finally: If you cannot donate, then Click Thanks if you appreciate the build, and all works.
Kernel Usage
Click to expand...
Click to collapse
The new thread for the kernel is HERE
ROM Links
Click to expand...
Click to collapse
I have tested an upgrade myself to these releases myself, and have not encountered any problems. But everyones setup is different, the upgrade process may work for you. But would recommend to do a NAND backup before you do. FINALLY, I will not be held responsible if you lose any data.
If you experience any boot loops, then expect at least 2, please report if you do get this, and what was your process, so that I can understand where the problem is happening.
DFT releases have been only included for experimental purposes, I will not guarantee that this works.
The build of this ROM is available here, If anyone wants to have play with this build, then feel free to checkout the repository by running the following command in Linux. This will grab the whole repository onto your machine.
Code:
git clone http://git.gitorious.org/android-leo-revolution/revolution-hd.git
Revolution HD 1.4 Super Light NAND CWM MAGLDR, Click or scan the image
Revolution HD 1.4 Super Light NAND CWM cLK, Click or scan the image
Revolution HD v1.4 Super Light NAND DFT (flashable via MAGLDR) MAGLDR 1.13 required
Revolution HD v1.4 Super Light NAND cLK (flashable via cLK using fastboot) cLK 1.3.1 required, attached in this post
Revolution HD v2.6 NAND CWM MAGLDR, Click or scan the image
Revolution HD v2.6 NAND CWM cLK, Click or scan the image
Revolution HD v2.6 NAND DFT (flashable via MAGLDR) MAGLDR 1.13 required
Revolution HD v2.6 NAND cLK (flashable via cLK using fastboot) cLK 1.3.1 required, attached in this post
Updates
Click to expand...
Click to collapse
Revolution HD 1.4.2 Super Light NAND CWM MAGLDR, Click or scan the image
Revolution HD 1.4.2 Super Light NAND CWM cLK, Click or scan the image
Revolution HD 2.6.2 NAND CWM MAGLDR, Click or scan the image
Revolution HD 2.6.2 NAND CWM cLK, Click or scan the image
Forum Links
Click to expand...
Click to collapse
ClockworkMod HowTo
cLK howto
config.txt Howto
Click to expand...
Click to collapse
This file needs to go onto your FAT32/vfat partition of the SD card
ppp_mode - set PPP or not, valid values 1 or 0 (not for cLK)
gps_zone - zone from pool.ntp.org, values may be uk, us, europe etc... check pool.ntp.org, for all possible values
a2sd_mode - set which a2sd mode you want, possible values, apps, dalvik, data (dalvik is default)
- a2sd - app and app-private
- dalvik - app, app-private and dalvik-cache
- data - app, app-private, dalvik-cache and data
- none - none of the above
example config
Code:
ppp_mode=1
gps_zone=uk
a2sd_mode=data
cLK Howto
Click to expand...
Click to collapse
Download the attached cLK1.3.3_system_300M_arif-ali.zip or cLK1.3.3_system_250M_arif-ali.zip for SL
turn phone on with volume down key, so that it is in SPL
install cLK by double-clicking CustomRUU.exe
To install recovery download the correct one from post #2 of cLK thread (link above)
reboot phone into fastboot by keeping the back key pressed
flash recovery by running "fastboot flash recovery recovery.img"
How To SL1.4.2 & 2.6.2 (CWM - MAGLDR)
Click to expand...
Click to collapse
Make sure you have partitioned the SD card correctly (ext partition, and a vfat partition)
Make sure you have followed the ClockWorkMod Howto to add the recovery to the phone (see links in the thanks/credits section)
Download the link above and put it into the vfat partition, maybe in a folder called ROMS
Boot phone into MAGLDR by holding on the Red button/close call
Select AD Recovery (Option 8)
Select Install zip from sdcard
Select choose zip from sdcard
Select the ROM from the SD
Select Yes to install the zip
reboot the phone and enjoy
How To SL1.4.2 & 2.6.2 (CWM - cLK)
Click to expand...
Click to collapse
Make sure you have partitioned the SD card correctly (ext partition, and a vfat partition)
Download the link above and put it into the vfat partition, maybe in a folder called ROMS
Boot phone into fastboot by pressing the back key
flash the recovery using "fastboot flash recovery recovery.img"
reboot phone into cLK recovery by holding on the Home key
Select Install zip from sdcard
Select choose zip from sdcard
Select the ROM from the SD
Select Yes to install the zip
reboot the phone and enjoy
How To SL1.4 & 2.6 (DFT)
Click to expand...
Click to collapse
MAGLDR 1.13 is now required
Connect phone to computer
Reboot phone and press hold the Red (on/off) button, until you get into the MAGLDR menu
Select USB Flasher
Start the DAF.exe application, and press Next until it tries to flash
press green button (call) button on the phone
This will now flash the phone and reboot
How To SL1.4 & 2.6 (cLK - fastboot)
Click to expand...
Click to collapse
Connect phone to computer
Reboot phone and press hold the back key, until you get into fastboot
Run "fastboot flash boot boot.img"
Run "fastboot flash system system.img"
Run "fastboot flash userdata data.img"
Run "fastboot reboot"
This will reboot phone, enjoy!!!
Howto apps2sd
Click to expand...
Click to collapse
By default app, app-private and dalvik-cache are on the SD card, if you need any other option, then follow the below instructions on what you want
data2sd
Code:
adb shell a2sd datasd
no dalvik on sd
Code:
adb shell a2sd nocache
remove a2sd completely
Code:
adb shell a2sd remove
Howto ROM Manager
Click to expand...
Click to collapse
After booting into the phone, you need to create the following file on your sdcard, and reboot the phone. Hopefully after this, your phone should work.
Code:
/sdcard/clockworkmod/.settings
with the following contents
Code:
{"is_clockworkmod":true,"current_recovery_version":"3.0.1.9","readonly_recovery":false,"recovery_timestamp":1300214577721,"flash_recovery":"flash_image recovery %s ; ","reboot_recovery":"","detected_device":"leo"}
I will attempt to get this added in the next release
Please READ!!!
Click to expand...
Click to collapse
make sure that any app that you do install move it back to the phone, and that will automatically reside on the SD card in the ext2/ext3/ext4 partition
For the Revolution 2.6 you need at least 288 MB in /system, so for EU users you need to flash the CWM build with 300MB /system, you can change the flash.cfg from the ClockworkMod and the change it similar to
Code:
system ya 300M
You can use the attached Recovery_300M.zip instead, which has the files changed, and flash using the attached file.
Known Issues / Bugs
Click to expand...
Click to collapse
At first/second/maybe third boot You will get a message "Process system is not responding".
FIX: press the volume up/down key wait 5 seconds, and it will continue to start
Occasional low volume
To Do List / Work in-progress
Click to expand...
Click to collapse
v2.7 & v1.5
Fix AudioFlinger Issue
re-do init process so that config.txt is read from SD card (only works with MAGLDR)
a2sd mode (apps, dalvik, data) - part 2
Add Stock Theme Option
Thanks/Credits
Click to expand...
Click to collapse
m-deejay (ROM & kernel)
Cotulla (MAGLDR, HSPL)
kholk (Radio)
RaiderX303 (ClockworkMod)
birkoffsjunk (img2cwm)
tkirton (dtapps2sd)
cedesmith (cLK)
letama (ril_wrapper)
#htc-linux and #htc-linux-chat
All ROM users
Screenshots
Screenshots in attachements
Changelog
Common ChangeLog
Code:
[B]v1.4.2 and v2.6.2[/B] (22/03/2011)
* new kernel AA 0.5 (see kernel thread for details)
* support for ROM Manager if using cLK
* Add latest ROM Manager to cLK build
* Update to cLK 1.3.3
* cache moved to mtd cache
* Update gmail, youtube, ES Explorer apks
[B]v1.4.1 and v2.6.1[/B] (11/03/2011)
* fix config.txt default value for a2sd_mode to be dalvik (caused issues if no value in config.txt)
* add config.txt support for cLK (excluding ppp_mode)
[B]v1.4 and v2.6[/B] (6/03/2011)
* fixed bug with upgrade and a2sd
* upgrade kernel to 0.3 (see changelog below for details)
* able to change settings dynamically using config.txt (MAGLDR only)
* gps zone
* ppp/rmnet
* a2sd mode (apps, dalvik, data)
* Add PPP support (to use with cLK)
* fix bugs with PPP
[B]v1.3 and v2.5[/B] (18/02/2011)
* fixed a bug with a2sd+
- now upgrade should work without any problems
- switching between 2.5 and 1.3 shouldn't be a problem now
- if data2sd is enabled, then this won't get ruined
* update kernel so that it contains the latest patches from (http://gitorious.org/linux-on-wince-htc/linux_on_wince_htc)
- merge MDJ kernel with current tree
- kernel-aa-0.2
[B]v1.2 and v2.4[/B] (06/02/2011)
* Fixed root issue
* reverted to dtapps2sd-2.7.5.3-beta04 (credit to tkirton)
- app
- app-private
- dalvik-cache
* added ES Explorer
[B]v1.1 and 2.3 [/B](19/01/11)
* S10.4 OC kernel included
* Loading of the relevant modules correctly
* Add apps2sd+
* Fixed data network issue
[B]v1.0 and 2.2[/B](16/01/11)
* Unsquashed
* Initial Release
Revolution HD
Code:
[B]v2.4.1[/B] (09/02/2011)
* Fixed apps2sd issue
* removed bootanimation.zip
[B]v2.4[/B] (07/02/2011)
* added Talk
Previous Changelogs (MDJ)
Code:
[b]v2.2[/b]
- Squashed apps & framework for more userspace
- Removed some media stuff
[b]v2.1[/b]
- Now for all Leo versions (LEO512 & LEO1024)
- New method (only system.img)
- Newest kernel MDJ S9.1 OC
- Fixed root permissions (Superuser)
- Fixed Market
- Removed some gapps (Talk, Facebook, Twitter, Maps, etc) (you can install it from market)
- Removed some wallpapers
- Removed some themes
- Others fixes/tweaks/changes
[b]v2.0[/b]
- Initial NAND release
[b]v1.0 Super Light[/b]
* Initial Release
* Removed 80% HTC Sense
* Newest kernel MDJ S9.2 OC
I only have mgdlr on a tmous.do I have to partition and do all that stuff.or can I just flash normally.
milkoo said:
I only have mgdlr on a tmous.do I have to partition and do all that stuff.or can I just flash normally.
Click to expand...
Click to collapse
Not at the moment. I will have a go with that later date, keep a look out
where dtapps2sd-2.7.5.2-signed.zip file?
add: ok. i find other thread.
I installed them all but stop blank screen. why?
(sorry for english)
Thanks. I really want that calender fixed.for now if I want to update the kernal I just copy the files with root explorer and reboot?
Sent from my HTC HD2 using XDA App
rambetiko said:
where dtapps2sd-2.7.5.2-signed.zip file?
Click to expand...
Click to collapse
check first post, now attached.
milkoo said:
Thanks. I really want that calender fixed.for now if I want to update the kernal I just copy the files with root explorer and reboot?
Click to expand...
Click to collapse
1. Extract the zip
2. mount the /boot on the phone using adb
3. copy the zImage in boot to /boot
4. copy syste/lib/modules/* to /system/lib/modules/.
5. reboot the phone
It is very likely the following may work, but I don't know your environment to be sure
if /dev/block/mtdblock0 is not your boot then, this will not work. You want to check to make sure
The Link in the first post is not meant for installing using manual process. but for CWM, but if you know what you are doing then you can use it
Code:
adb shell mkdir /data/boot
adb shell mount -t yaffs2 -orw,nosuid,nodev /dev/block/mtdblock0 /data/boot
cd boot
adb push zImage /data/boot/zImage
adb remount
cd ..\system\lib\modules
adb push bcm4329.ko /system/lib/modules/bcm4329.ko
adb push tun.ko /system/lib/modules/tun.ko
adb push cifs.ko /system/lib/modules/cifs.ko
adb push fuse.ko /system/lib/modules/fuse.ko
adb push msm_rmnet.ko /system/lib/modules/msm_rmnet.ko
adb push nls_utf8.ko /system/lib/modules/nls_utf8.ko
echo Cleaning up...
adb shell umount /data/boot
adb shell rmdir /data/boot
That's too confusing.I'm just going to wait for a normal flash.thank you.
Sent from my HTC HD2 using XDA App
Thanks for the work arif-ali, I'm sorry but how do I run the command to xfer the dalvik-cache? sorry if its a stupid question.
Won't boot, bootloop, not a noob
Edit: I didn't try or read enough, my favorite build thank you for your hard work. Make sure SYSTEM PARTION is 400MB from clockwork page
follow instructions and walha sweetest build by to date HD2 devs kick ass
neileisenhauer said:
Won't boot, bootloop, not a noob
Click to expand...
Click to collapse
Me too um almost missing SD android
This is all "greek" to me...I'm going to have to wait for a un-squashed normal NAND version.
I appreciate all the work that you have been doing to keep this alive.
Thanks!
Pictures please
if you may send the pictures in this forum to see if it worked for you. Thank you for working for this.
DAP420 said:
Me too um almost missing SD android
Click to expand...
Click to collapse
1. How big are your system partitions?
for the Revolution HD 2.2 it needs to be ~300MB
2. Have you done a factory/data reset from the CWM menu, before installing via CWM? (make sure you are running 1.2 of ClockWorkMod)
calaisxtyo said:
Thanks for the work arif-ali, I'm sorry but how do I run the command to xfer the dalvik-cache? sorry if its a stupid question.
Click to expand...
Click to collapse
The command is in the first post
search the forums on how to get the adb working on your system
In short
1. download adb for your system
2. make sure adb in your path
3. open a terminal/command prompt
4. run the command in the first post
New release
All,
I am building a release for Super Light, i have it all ready, but I am stuck at one problem at the moment.
After every boot I need to press the volume up/down key once for it to boot.
Something about audioflinger. Anyone have any ideas?
Volume buttom?
Are you talk about auto boot?
I'm not sure I understand the question well.
Check this link half way down the page.
jayceooi.com/2010/12/31/how-to-install-nand-android-on-htc-hd2
Keep up the good work.
Eric Br
I flashed CWM 250M, then installed the lite version 1.1, but it won't boot...
Edit: Hey HD2 Folks! I was just checking in to see how my old thread was doing and im surprised by the number of people that are still using and updating the toolkit. It has been quite a few years since the HD2 has been released, and it is still getting updates that not even new phones are getting. HD2 has gotten a special place in smartphone history because of this. I would really like to thank all the developers that made this possible and all the users that supported the developers. I obviously don't have my HD2 anymore (i actually cracked my first hd2 and got a second one which i lost and got a third one which started having power button problems, then i moved on, i would still use one if i had one), but i will always support hd2 users. And im sorry to everyone who donated and didn't get their names on the donations list. I really appreciate your donation, i just wasnt able to update my thread due to different problems, and im sorry about that. I hope HD2 gets more updates and ability to run more oses (Ubuntu OS etc.) in the future.
Please Don't Forget to Check This Poll.
Thanks a lot to bzdemes for using the source code and continuing my work! This is what a community and open source is for!
Thanks a lot to 96edwy for making the video. I really appreciate it Also go to this link and thank him
Click to expand...
Click to collapse
Please Do Not Modify/Rename/Delete Any Files From The Program Files Directory! Doing So Might Brick Your Device!!!
Hello XDA Users / HD2 Owners,
This is an All in One Toolkit for HTC HD2 NAND Users. The main purpose of this toolkit is to simplify many complex tools/guides which are difficult or unsafe to use. As we all know that HD2 has got a powerful hardware base, but the pre-packed Windows Mobile operating system just ruins all the fun of having a device with high specs. So, developers on XDA like codesmith and Cotulla have created alternative bootloaders which can load Android kernels so that we can use Google's Android operating system on our devices. This tool will help you install those bootloaders, and also do many other customization/modding works easily from one control panel. Here are the main features of the Toolkit:
Simplifies Installation of cLK and MAGLDR (Android Bootloaders)
Simplifies Installing Roms, Radios, SPL's and other things by letting you install NBH Files with one click
Makes it easier to Re-Partition your Android Phone
Makes it easier to install Reicvery
Automates process of flashing NBH Files
Click to expand...
Click to collapse
Well, those were just the main highlights of the tool. There are a lots of other numerous features that will let you easily do many complex stuff. After lots of nights without sleep and red eyes, i have finally made this small piece of software able to do most things that a normal HD2 NAND Android would want to do easily.
Current Version: 4.2.0.1
Current Recovery Version: 5.0.2.6
Last Update: 6/15/2011
Latest HighLights
Installer
Express Mode - Express Mode enables you to automatically do a lots of stuff automatically. Just check the Express Tools button and try to use the features mentioned on the msgbox
NBH File Handler - Easily install nbh files by just opening it like a normal file
Click to expand...
Click to collapse
About The Software
Hd2 Toolkit is the result of a lots of nights of work with help from recognized developers such as arif-ali, seadersn and others. I have tried my best to make the software as user friendly and powerful as possible. I really appreciate the fact that you guys are using and loving this little software i made. At first, i made a tool that was intended to make it easier to repartition MAGLDR bootloader. Then gradually you guys started using it and started suggesting more and more features which i implemented as soon as i could. Version after version, i started to add new new features you guys suggested and soon i changed the name to ClockworkMod Installer. After few versions of developement, and bug reporting from T-Macgnolia, i finally added support for cLK bootloader. Then after adding a lot more features you guys suggested, i changed the name again, and this time to a name that makes broader sense, HD2 Toolkit. I will keep on updating this tool as frequently as i can. I hope you guys will like this tool. Any suggestions, comments, questions, bug reports or anything related to this tool are welcome. Thanks to mods who made this post a sticky
Click to expand...
Click to collapse
General Info
1) MAGLDR Repartition - This option will completely erase all your files and data on your device and change the system partition size to the one you choose. Use this option if you get no memory left error or if you need to change partitions to use new rom.
Click to expand...
Click to collapse
2) MAGLDR Recovery Update - This will update your recovery from older version to newer version in MAGLDR without deleting any data or changing partitions. Use the first option if you get no memory left error. Your phone needs to be powered on, connected, usb debugging enabled and in android to use this option.
Click to expand...
Click to collapse
3) cLK Recovery Install - This will install/update your recovery from older version to newer version in cLK. Your phone needs to be powered on, connected, usb debugging enabled and in android to use this option.
Click to expand...
Click to collapse
4) cLK Repartition - This option allows you to re-partition your hd2 running clk bootloader easily like magldr.
Click to expand...
Click to collapse
5) Downgrade Recovery - This option allows you to downgrade recovery on your hd2 easily. This might be useful if you get an no memory available error while flashing.
Click to expand...
Click to collapse
MAGLDR Partitioning Instructions
1) Download the ZIP file.
2) Extract it somewhere.
3) Open Setup.exe
4) Choose the system partition size you want, or choose custom and enter custom size.
5) Press Repartition button.
6) Follow Instructions.
Click to expand...
Click to collapse
MAGLDR Upgrade Instructions
1) Download the ZIP.
2) Extract it somewhere.
4) Choose MAGLDR Recovery Update
5) Press Update
5) Follow Instructions.
Click to expand...
Click to collapse
cLK Partitioning Instructions
1) Download the ZIP file.
2) Extract it somewhere.
3) Open Setup.exe
4) Choose "cLK Reparititioin" and choose system partition size you want.
5) Press Repartition button.
6) Follow Instructions.
Click to expand...
Click to collapse
cLK Upgrade Instructions
1) Download the ZIP.
2) Extract it somewhere.
4) Choose cLK Recovery Update
5) Press Update
5) Follow Instructions.
Click to expand...
Click to collapse
Download (4.2.0.1)
Go To Download Thread By bzdemes, Latest download links will be provided here.
Download Drivers By T-Macgnolia
Donations
Donate
I am really thankful to everyone who donated to me and helped me keep the server alive. Donations are appreciated and help me pay for the server bandwidth costs and also to buy some coffee or soda sometimes. I would recommend donating to different charities that help in the welfare of human society than donating to me. You don't necessarily have to donate to me to use this tool. You are free to modify, distribute, debrand, or do anything with this tool for free (a credit would be good though). Thanks a lot to the people listed below for donating to me and helping me keep the server alive
Niki Muller - $10
Vincent ten Berge - $10
Graziano Burlini (rebel01s) - $10
W Cunneen (shakeym) - $10
Tomas V Curbelo (vcurbel) - $10
eladavron - $15
lucian ionut huidici - $10
Odai Jaber (hasoon2000) - $5
Jens Guenther - $10
Wilhelm Schulteis - $10
Mark Thompson - $5
Olav Indergaard (indyman1978) - $10
Benjamin Blavat - $5
Dimitrios Drivas - $10
Skopelitis Evagelos - $2
Carl Collins - $20
Roman Troppmann - $10
Gero Hanraths - $5
Marcus Rupp - $1
Tadhg Mahony - $5
Benjamin Blavat - $10
Jan McGhee - $5
Ronan Preston - $10
Sergii Grabovetskyi - $10
Click to expand...
Click to collapse
Thanks a lot guys, i really appreciate your donations.
Click to expand...
Click to collapse
Credits
bzdemes for continuing my work!
Koush for Clockworkmod
arif-ali and seadersn for compiling clockworkmod and also for lots of other stuff
T-Macgnolia for doing bug testing and reporting them (Big Thanks!!)
codesmith for cLK
Cotulla and DFT for MAGLDR
Everyone who suggested me features
Everyone else who has helped in developement of HD2
Click to expand...
Click to collapse
Linux Users
mardurhack has confirmed that Downgrading Recovery works on linux using WINE.
I did not create an installer for linux users as the main tool required to flash CWM for MAGLDR hasn't been made for linux by DFT. I would suggest using WINE to emulate the app (haven't tried it yet but should work).
As for the cLK version, you can easily install it on linux. Just download a fastboot binary for linux and use the following command:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Click to expand...
Click to collapse
What to expect on future versions
Rom manager version fix
Custom partition sizes for cLK (working on it, almost complete)
Easy repartitioner for ROM Developers
Anything you suggest
Click to expand...
Click to collapse
If you respect my work, please:
Do not directly link to the download link, because people will miss a lots of information and instructions provided on this thread. If you want people to download this software, provide a link to this thread.
Do not make mirrors, it just creates confusions and inteferes with updates. If you have a spare server and want to help me, please pm me and we can include it as an official mirror. And i dont get paid for distributing files, so i dont think it is necessary to make mirrors. Right?
Do not redistribute the application with viruses or trojans on them. No-one likes those. LOL
Thanks button would be great
Click to expand...
Click to collapse
Please don't forget to read the FAQ on third post and instructions on second post.
P.S. I take no responsibility for anything done to your device by these tools. It works on my phone. And dont forget to hit the Thanks button if this helped. Enjoy!
Source Code For v4.1
I recently broke my left hand and wont be able to continue this project for like 2 months or more. So i want to release the source code to public so that you guys can continue it and improve it. The au3 files can be compiled using this tool. And the setup file can be compiled using Inno setup. I cant type much using my right hand only, so i hope u guys can figure out which file points to what. Not necessary, but if you modify and plan to release a modified version, a link to my website http://wireshock.com and credits to me would be appreciated. If you want the modified version to be included in this sticky post, please pm me. If you need help about source, add me on skype : kaushalsubedi . Thanks for your support and donations guys.
Download Source
Click to expand...
Click to collapse
Click to expand...
Click to collapse
FAQ
Instructions
A. How do i install MAGLDR?
1) Open Toolkit
2) Press "Install MAGLDR" button on "Other Tools" area.
3) A new window will open, follow instructions.
Click to expand...
Click to collapse
B. How do i install / repartition cLK?
1) Repartitioning cLK and installing cLK is same thing. So choose repartition cLK on the top.
2) Choose the partition size you want to install and choose cache size you want to install.
2) Press the repartition button on the bottom left corner.
3) Follow instructions.
Click to expand...
Click to collapse
C. How do i install/update recovery on cLK?
1) Choose cLK install recovery on top.
2) Press update button on the bottom left corner.
3) Follow instructions.
Click to expand...
Click to collapse
D. How do i install recovery / do a repartition on MAGLDR?
1) Choose MAGLDR Repartition on top.
2) Choose the partition size you want to use. And type in the cache size you want.
3) Press Repartition button on the bottom left corner.
4) Follow instructions
Click to expand...
Click to collapse
E. How do i update recovery on MAGLDR?
1) Choose MAGLDR update recovery on top.
2) Press Update button on bottom left corner.
3) Follow instructions.
Click to expand...
Click to collapse
F. How do i change from MAGLDR to cLK?
1) Backup your current rom using recovery on magldr.
2) Open toolkit, and choose Wipe (Task29) on the bottom right.
3) Follow instructions and come back to toolkit after completing that.
4) Follow instructions from B. and C.
5) Download this file and put it on your sd. (Thanks to arif-ali, airforceproductions and charnsingh_online for the file)
6) Go to recovery and restore the backup you made.
7) Install the zip file you copied to your sd.
8) Reboot and you are ready to go.
Click to expand...
Click to collapse
G. How do i change from cLK to MAGLDR?
1) Backup your current rom using recovery on cLK.
2) Open toolkit, and choose Wipe (Task29) on the bottom right.
3) Follow instructions and come back to toolkit after completing that.
4) Follow instructions from A. and D.
5) Download this file and put it on your sd. (Thanks to tytung for the file)
6) Go to recovery and restore the backup you made.
7) Install the zip file you copied to your sd.
8) Reboot and you are ready to go.
Click to expand...
Click to collapse
H. How do i upgrade cLK?
1) Backup your current rom using recovery on cLK.
2) Open toolkit, and choose Wipe (Task29) on the bottom right.
3) Follow instructions and come back to toolkit after completing that.
4) Follow instructions from B. and C.
5) Go to recovery and restore the backup you made.
6) Reboot
Click to expand...
Click to collapse
I. How do i upgrade MAGLDR?
1) Backup your current rom using recovery on MAGLDR.
2) Open toolkit, and choose Wipe (Task29) on the bottom right.
3) Follow instructions and come back to toolkit after completing that.
4) Follow instructions from A. and D.
5) Go to recovery and restore the backup you made.
6) Reboot
Click to expand...
Click to collapse
Dont forget to check this guide if you want to change to cLK
FAQ
Q: What is ClockWorkMod?
A: It is an recovery tool that helps you install custom roms, backup your phone, restore and do a lots of stuff.
Q: What is nandroid?
A: It is a tool that lets you backup and restore your phone easily. Its available on clockworkmod recovery.
Q: What does the software do?
A: It helps you choose partition size easily, update magldr recovery without loosing data, update clk recovery and lot more. Check the first post.
Q: Is it free?
A: Yeap, always free.
Q: Will i loose all my data if i flash this?
A: Depends on what you are trying to do, refer to first post.
Q: How can i avoid loosing data?
A: Update, dont reparittion, or use nandroid.
Q: How does one decide what partition size to set?
A: It depends on the rom you are using, some ROM's suggest you to use small partition and some suggest you to choose large ones (specially sense roms)
Q: Where can i find this software? please..
A: LOL, this made me laugh. Its in the zip file named HD2_Installer.exe
Q: It says no memory left, what should i do now?
A: No memory left means the last version of recovery you installed was smaller than the current one. You need to completely repartition MAGLDR in order to install new version in that case.
Q: The last version seems to be confusing. What is Magldr partitioning? Should it just say "Install CWM Recovery" instead?
A: I will add a documentation after few minutes.
Q: I have the following error:
Error Descritpion: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Descriptoion: Config: file not exist
Info: .\RSPL\RSPL.cpp (359)
Click to expand...
Click to collapse
A: Fixed in version 2.2
Q: Cursor just keeps blinking. Nothing happens.
A: Your usb is not connected properly, reconnect it.
Q: I have one more question.
A: Reply this thread, ill help.
Click to expand...
Click to collapse
ChangeLog For Installer
v1.0 - 5/21/2011
Initial Release
Lots of Partition Presets
Ability To Choose Custom Sizes
Windows Only
Click to expand...
Click to collapse
v2.1 - 5/28/2011
Complete Re-Do
Added cLK Support
Added Console
New UI
MAGLDR Update Added
Fixed Bugs
FileSystem Fix
Lot More..
Click to expand...
Click to collapse
v2.2 - 5/28/2011
Fixed DAF RSPL Error
Fixed Some Bugs
Changed file working dirs
Lot More..
Click to expand...
Click to collapse
v3.1 - 5/31/2011
Added Complete Support For cLK
cLK Repartition Added
New UI
cLK Update added
Task29 Added
Magldr and cLK Installer added
clk fastboot update problem fixed
bugs fixed
language file support added
code optimised
clk downgrade option added
Lot More..
Click to expand...
Click to collapse
v3.4 - 5/31/2011
Added HSPL Installation Option
Fixed some bugs on language file
Changed Icon
Added MAGLDR cache partition size chooser
Changed default cache from 5 to 44 in clk
Downgrade Recovery works for both clk and MAGLDR now
Lot More..
Click to expand...
Click to collapse
v3.6 - 6/1/2011
Fixed Button Names
Fixed Language File Errors
Fixed Coding Bugs
Fixed DAF Error, Made it error proof (for real this time)
Added custom NBH Installer
Fixed File Working Dir Errors
Lot More..
Click to expand...
Click to collapse
v3.9 - 6/2/2011
Fixed cLK Recovery Installer Bug
Changed language file texts, more clear now.
Beta tested everything again.
Customised RUU and Task29, better instructions
Fixed file browser bug
Added 450MB cLK partition (thanks to arif-ali)
Modified task 29, its blank now. (doesnt install splash)
Fixed instructions on CWM updater
Lot More..
Click to expand...
Click to collapse
v4.1 - 6/14/2011
Setup File
Express Mode
Bug Fixes
NBH File handler
Update Button
Drivers
Fixed bugs on language files
Lot More..
About This Version:
Really sorry that it took longer than other versions. Dont forget to check express tools and direct installation of nbh files on this version. Feedbacks are welcome
Click to expand...
Click to collapse
wow wow wow
man this is great step for what we need ..u read our mind ..thanks
kinda noob question - but if i will flash this newer version, will i loose my installed Android ROM?
and second one - can i avoyd deleting rom by simple backup?
thx
phaeton_esc said:
kinda noob question - but if i will flash this newer version, will i loose my installed Android ROM?
and second one - can i avoyd deleting rom by simple backup?
thx
Click to expand...
Click to collapse
first answer: yes, currently, magldr doesnt support flashing recovery without recreating the partitions. if you are using clk, you wont loose anything.
second answer: just use nandroid from your current recovery and you will be good to roll
What is new for the recovery ? Except the nice installer ?
Thanks anyway
Nice job...
How does one decide what partition size to set?
TIA
The installer is a genius idea, thanks very much. Is there a current changelog for CWM itself?
piknik67 said:
How does one decide what partition size to set?
TIA
Click to expand...
Click to collapse
depending on witch rom you use.... usualy non sense roms will work with 150mb partition as for the sense roms you need 250-400mb. just read the req of each roms
Thx a lot mate! Right now, I'm currently using your cwm method.
Just want to ask you:
Whats different between 3.0.4 and 3.0.8? I'm currently using 3.0.4.
Sent from my ADR6350 using XDA Premium App
Nice job!!
Did anyone try to port a backup maded in 3.0.2.5 to 3.0.2.8, i know that in older versions there was a problem.
i have played a little and i saw that changing the partion ,changes the cache to,how do you personalize that?i have created the partition,stoped the process, changed the cache,started the process and the cache came back in default....
Sent from my HTC RAM (D)HD2 v.2.0 using XDA App
Please correct instructions in bat file for CLK:
in your file:
echo Power It Off,
echo Hold Home Button And Power Button Till
echo You Get In The FastBoot Mode
Click to expand...
Click to collapse
it should be:
Power on your phone, hold left arrow button
till you get the fastboot mode
Click to expand...
Click to collapse
(hold Home button to enter into recovery)
Cooool...
Thanks man..
Excellent work.
The latest CWM is 3.1.0.1
It is the one I am using.
How easy is it to change the recovery to the latest?
Sent from my HD2 phazer!
thanks dude ,id hit the thanks button a hundred times if i could ,this is a great idea
Yeah I also want to know what'd new in this version. Can we reboot into the recovery now, or any other exciting development?
Installer
I have created an custom installer type tool that enables you to choose the partition size of system partition instead of downloading different files for each partition size.
Just choose the size of the partition as you want and press flash button and follow simple instructions.
>>>>Where can i find this installer? please..
[TOOL] [v3.2] [09NOV] Ubuntu Touch "system-image" Installer // w/o computers
# All credit goes to Ubuntu and contributors
ut-system-installer
I wanted to install Ubuntu Touch system-image (official, ro, OTA-enabled, for-sale-in-the-future) on my Galaxy Nexus, but there were some limitations and disadvantages to do so. It requires Ubuntu on my computer and completely wipes my device. Compared to cdimage-touch, which one can install easily with his/her phone, system-image is hard for some people to try, so I made a simple recovery-flashable zip with shell scripts to install it without computer and losing data. It downloads and installs system-image on your device(officially supported ones only).
What is does:
The same thing as doing
Code:
phablet-flash ubuntu-system --channel devel --no-backup
but without wiping the device, so
-Download files for installing Ubuntu Touch system-image (half-automatically)
-Install it on your device (supported ones by Canonical)
Supported Devices:
-Galaxy Nexus (maguro, toro, toroplus)
-Nexus 7 (grouper, tilapia)
-Nexus 4 (mako)
-Nexus 10 (manta)
Downloads:
http://d-h.st/users/zittoro/ut
Do not use anything in wip folder.
* This will install a CWM-based recovery from Ubuntu, and your device could brick but will not be compensated. *
How-to:
1. Download the zip.
2. Unzip it in /sdcard/Download/ut
3. Move or copy ut-system-dl(read "Arguments for "ut-system-dl"" in second post for options) to /data. Then run the script with root(su). You can just type these in terminal instead of doing this step manually (You need busybox and su installed)
Code:
su
cp -a /storage/emulated/0/Download/ut/ut-system-dl /data
sh /data/ut-system-dl
4. Zip everything in /sdcard/Download/ut
5. Flash it in recovery and reboot recovery (Just use the default install menu at home if you are using special recoveries like MultiROM)
6. Enjoy Ubuntu Touch
Bug reports: post your /sdcard/Download/ut/ut-system.log, /cache/recovery/last_log, and copy of the error if possible
Changelogs:
Code:
[b]09NOV2013[/b]
v3.2
-Added official UT disclaimer link
-Cleaner code
[b]07NOV2013[/b]
v3.1
-Support for "generic customization" channels
[b]03NOV2013[/b]
v3
-Support for "*-customized" channels
-More consistent and easier way of configuring files names to download
v2.2
-Download the recovery image properly as saucy-named doesn't exist in the path anymore. --Thanks to @pildoc for reporting.
[b]21OCT2013[/b]
v2.1
-Log file support to the installation script; still need recovery log because of "system-image-installer"
-Support for trusty-related channels
-Workaround for delta images when device files are the same
-Dropped support for old-channel device images
-Workaround for non-patched recoveries
-Show the actual device names rather than codenames to avoid confusion
[b]19OCT2013[/b]
v2
-Add support for deciding which build number to download --$4
-Fix delta image download
-Mount before extracting files
[b]18OCT2013[/b]
v1.2
-Fix for script error
-Aborts installation if script fails
v1.1
-Recovery installation fix; it wasn't moved to the correct path, my bad:(
-Added log file: ut-system.log
[b]16OCT2013[/b]
v1
-Initial
Arguments for "ut-system-dl":
-$1: -auto: default for script, automatically detects the device's codename using the value for "ro.build.product"
-DEVICE_NAME: images for DEVICE_NAME devices
-$2: -full: default for script, full images used for initial installation
-delta: delta images used for updates(OTA)
-$3: -CHANNEL: use CHANNEL channel to download images, default "devel"
-$4: -BUILD_NUMBER: build number of image
I dont get it
Sent from my Nexus 4 using xda app-developers app
gazhead said:
I dont get it
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
It basically installs the recommended version of ubuntu touch
Looks like your path is wrong? If its going into download/ut shouldn't it be:
su
cp -a /storage/emulated/0/download/ut /data
sh /data/ut-system-dl
hockeyadc said:
Looks like your path is wrong? If its going into download/ut shouldn't it be:
su
cp -a /storage/emulated/0/download/ut /data
sh /data/ut-system-dl
Click to expand...
Click to collapse
Dang I made a mistake
Zittoro said:
Dang I made a mistake
Click to expand...
Click to collapse
Haha no problem. I'm trying this out on my phone(Maguro) and it gets stuck at connecting to the server. Any ideas? Just a ton of people trying to download right now?
hockeyadc said:
Haha no problem. I'm trying this out on my phone(Maguro) and it gets stuck at connecting to the server. Any ideas? Just a ton of people trying to download right now?
Click to expand...
Click to collapse
Can you get a screenshot for me?
Zittoro said:
Can you get a screenshot for me?
Click to expand...
Click to collapse
Actually, i just tried again and its working. 53 min ETA but its ok. When I zip this and flash it, does it remove my current recovery? How do I go back to my current rom in the future?
hockeyadc said:
Actually, i just tried again and its working. 53 min ETA but its ok. When I zip this and flash it, does it remove my current recovery? How do I go back to my current rom in the future?
Click to expand...
Click to collapse
It installs a CWM-based recovery with some tweaks and workout for system-image installation. Since it doesn't even touch your system partition, you can just flash an android kernel and get back to android.
Zittoro said:
It installs a CWM-based recovery with some tweaks and workout for system-image installation. Since it doesn't even touch your system partition, you can just flash an android kernel and get back to android.
Click to expand...
Click to collapse
Nice! That makes it pretty easy. Now we just need a way to dual boot lol. Perhaps a program that allows you to select android or ubuntu, and upon android selection it flashes a new kernel?
hockeyadc said:
Nice! That makes it pretty easy. Now we just need a way to dual boot lol. Perhaps a program that allows you to select android or ubuntu, and upon android selection it flashes a new kernel?
Click to expand...
Click to collapse
It's already possible on gnex.
http://forum.xda-developers.com/showthread.php?t=2480404
This kernel has tri-boot option for android and ut and recovery dual-boot using its recovery
Zittoro said:
It's already possible on gnex.
http://forum.xda-developers.com/showthread.php?t=2480404
This kernel has tri-boot option for android and ut and recovery dual-boot using its recovery
Click to expand...
Click to collapse
Awesome!
hockeyadc said:
Awesome!
Click to expand...
Click to collapse
Hey did you get it installed successfully? Some people in a different community say it doesn't. Did it boot into a new recovery when you rebooted it?
Zittoro said:
Hey did you get it installed successfully? Some people in a different community say it doesn't. Did it boot into a new recovery when you rebooted it?
Click to expand...
Click to collapse
I haven't tried yet. I realized how many apps I need and use on a daily basis, so I would rather not install it yet. Just gonna wait it out until Ubuntu is more complete.
Changelogs:
18OCT2013
v1.1
-Recovery installation fix; it wasn't moved to the correct path, my bad
-Added log file: ut-system.log
v1.2
-Fix for script error
-Aborts installation if script fails
Blur
can you guys explain to me step by step in doing so. Sorry for being a noob. i want to learn how to so that i can help others and also improve my knowledge..
subaash said:
can you guys explain to me step by step in doing so. Sorry for being a noob. i want to learn how to so that i can help others and also improve my knowledge..
Click to expand...
Click to collapse
1. Download the zip from the link
2. Unzip it to the specified directory on your phone (you can do this with a file explorer app)
3. Download a terminal app and copy and paste the "code" into it.
4. If you get an error, post your /sdcard/Download/ut-system.log. If you don't, zip everything in the specified folder and flash it in recovery
5. Reboot recovery right after the installation
Changelogs:
19OCT2013
v2
-Add support for deciding which build number to download --$4
-Fix delta image download
-Mount before extracting files
Will this work with kulturom(nexus7) AS secondary ROM?
Wysłane z mojego Nexus 7 przy użyciu Tapatalk