Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
FAQ
What is apps2ext?
Code:
Apps2ext (previously called apps2SD) moved all user installed apps to a secondary ext partition on your sdcard.
This method had the advantage of being straight forward and simple, However, it had the drawback of being difficult to set up.
This method is no longer officially supported by CyanogenMod.
Please see the forum for device specific work-arounds if you really want apps2EXT on CyanogenMod.
Why did I include a apps2ext script to the rom?
Code:
Even though we have 1GB space of internal memory and a lot of the G2 users believe that is enough.
The more apps that are installed, the slower our phones can get after time.
Apps2ext takes all of that stress from our internal storage and diverts it to our sd-ext partition if there's any.
This results in our phones never have to worry about slowing down just because of the number of apps that we have installed.
What is swap?
Quoted from Cyanogenmod Wiki
Code:
Swap is, in short, virtual RAM. With swap, a small portion of the hard drive is set aside and used like RAM.
The computer will attempt to keep as much information as possible in RAM until the RAM is full.
At that point, the computer will begin moving inactive blocks of memory (called pages) to the hard disk, freeing up RAM for active processes.
If one of the pages on the hard disk needs to be accessed again, it will be moved back into RAM, and a different inactive page in RAM will be moved onto the hard disk ('swapped').
The trade off is disks and SD cards are considerably slower than physical RAM, so when something needs to be swapped, there is a noticeable performance hit.
Unlike traditional swap, Android's Memory Manager kills inactive processes to free up memory.
Android signals to the process, then the process will usually write out a small bit of specific information about its state (for example, Google Maps may write out the map view coordinates; Browser might write the URL of the page being viewed) and then the process exits.
When you next access that application, it is restarted: the application is loaded from storage, and retrieves the state information that it saved when it last closed.
In some applications, this makes it seem as if the application never closed at all.
This is not much different from traditional swap, except that Android apps are specially programed to write out very specific information, making Android's Memory Manager more efficient that swap.
Requirements:
- HTC G2 / HTC Desire Z
- S-OFF
- SDCard
Recommended Requirements:
*Only need this is you plan to use sd-ext and swap*
- Sd-ext partition at least 1024MB
- Swap partition at least 256MB
I DO NOT RECOMMEND USING ANY KIND OF SUPERWIPE
The rom has it's own built in wipe
Installing Process
- Backup your previous rom
- Repartition your sdcard ONLY if you want sd-ext and/or swap enabled
- Download the rom
- Wipe everything (data, cache, dalvik-cache, battery stats)
- Flash the rom
- Once flashing process is complete it will auto reboot!
Working
- Everything should be
Not Working
- Nothing, but tell me if anything is broken
Issues
- None at the moment
REGARDING ISSUES
Post the issues on http://pastebin.com/
- Please give me a logcat if you have an error, I can not help you if there's no logcat of the issue
Credits:
- HTC (Making HTC G2/Desire Z)
- Google (Android OS)
- Cyanogenmod (Source)
- SparksCo (Sd-ext, swap, kernel, cycling bootanimation, symlink scripts and sysctl tweaks)
- SparksCo (Kernel)
- Rambooster script (Credits to Darkky)
- Sdcard increase script (Credits to brainmaster)
If I missed anyone, let me know and I'll add you to here
Download link:
CM7-PyroMod-Stable-V2.3.7
checksums md5: I will provide one later
If you love my roms, donate and hit that thanks button!
Much appreciated!
Great stuff. Congrats on your first ROM! Just i dont think its ok that you have GAAPS installed already. Just a heads up.
Changelog
Version 2.3.7:
Rom
- Compiled from CM Source (Credits to SparksCo)
- Added kernel script (Credits to SparksCo)
- Added sysctl tweaks (Credits to SparksCo)
- Added cycling bootanimation (Credits to SparksCo)
- Working audio (Credits to SparksCo)
Theme
- Stock theme
- Stock font
- Stock audio tones
- Nice FOUR looking bootanimation (Credits to SparksCo)
Kernel
- Custom kernel (Credits to SparksCo)
EDIT: badass dude. Keep it up!
travisd4est said:
Any screenies??
Click to expand...
Click to collapse
Like I said in the OP, it's stock themed for right now
Okay blah I'm downloading and will give a spin this morning. I'll update you on what I think.
Update: This rom is pretty stable. Everything is working perfectly even the wireless tether. No FC's now its time to test the battery life. For just the begin this rom is great. Now its time for some themes! lol
313dash said:
Okay blah I'm downloading and will give a spin this morning. I'll update you on what I think.
Click to expand...
Click to collapse
Thanks, let me know what you think about it
Congrats on your first rom.
siulmagic said:
Congrats on your first rom.
Click to expand...
Click to collapse
Thanks, also thanks for helping me a little
Cause Myjbarr is being a complete douche about me forgetting to asking for his permission to use his rom as a base, he has to remember did he even ask cyanogen to use his rom as a base?
I don't think so
So for everyone, blame him for killing my rom
blahbl4hblah said:
Cause Myjbarr is being a complete douche about me forgetting to asking for his permission to use his rom as a base, he has to remember did he even ask cyanogen to use his rom as a base?
I don't think so
So for everyone, blame him for killing my rom
Click to expand...
Click to collapse
Lol...
Sent from my Desire HD using Tapatalk
blahbl4hblah said:
Cause Myjbarr is being a complete douche about me forgetting to asking for his permission to use his rom as a base, he has to remember did he even ask cyanogen to use his rom as a base?
I don't think so
So for everyone, blame him for killing my rom
Click to expand...
Click to collapse
Why do I always have to take the blame....??? Its never anyone elses fault. Its always my mistake. Shame on me, for not handing over my rom to you so you can call it yours. Also it "mjybarr" and not "myjbarr".
meXdroidMod GingerMex Ghost Chile TEST
mjybarr said:
Why do I always have to take the blame....??? Its never anyone elses fault. Its always my mistake. Shame on me, for not handing over my rom to you so you can call it yours. Also it "mjybarr" and not "myjbarr".
meXdroidMod GingerMex Ghost Chile TEST
Click to expand...
Click to collapse
blahbl4hblah said:
Cause Myjbarr is being a complete douche about me forgetting to asking for his permission to use his rom as a base, he has to remember did he even ask cyanogen to use his rom as a base?
I don't think so
So for everyone, blame him for killing my rom
Click to expand...
Click to collapse
why does it have to be a blame game at all, guys? Seriously, we are all big boys and girls. If someone makes a mistake, they need to own up to it and fix it, not blame anyone else. All that does is cause bad feelings in the community. You guys are both awesome, and I believe we can all get along in peace, and learn from and help one another, to the benefit of the whole community. Sound like a plan, guys?
mjybarr said:
Why do I always have to take the blame....??? Its never anyone elses fault. Its always my mistake. Shame on me, for not handing over my rom to you so you can call it yours. Also it "mjybarr" and not "myjbarr".
meXdroidMod GingerMex Ghost Chile TEST
Click to expand...
Click to collapse
Question... is your rom based off of CM? If it is, why shouldn't he be able to say the same thing you just did... The best way to get great roms is by sharing and expanding. That is why CM is so great, it is a contribution from many people!
Durkbeef said:
Question... is your rom based off of CM? If it is, why shouldn't he be able to say the same thing you just did... The best way to get great roms is by sharing and expanding. That is why CM is so great, it is a contribution from many people!
Click to expand...
Click to collapse
Yeah he's rom is based off of CM, but it doesn't matter anymore actually. I'm already working on a new release based off CM#17, along with the chance of better things
blahbl4hblah said:
Yeah he's rom is based off of CM, but it doesn't matter anymore actually. I'm already working on a new release based off CM#17, along with the chance of better things
Click to expand...
Click to collapse
sounds like a great plan good luck, bro, and cant wait to see where this will go from here. Still keeping the increased vm and apps2sd, I hope?
jmwils3 said:
sounds like a great plan good luck, bro, and cant wait to see where this will go from here. Still keeping the increased vm and apps2sd, I hope?
Click to expand...
Click to collapse
vm yes, but apps2sd of course but different haha
blahbl4hblah said:
vm yes, but apps2sd of course but different haha
Click to expand...
Click to collapse
ok, cool means one less zip to flash for CM, sounds like a definite plus to me.
jmwils3 said:
ok, cool means one less zip to flash for CM, sounds like a definite plus to me.
Click to expand...
Click to collapse
I'll leave it at this, you'll flash ONE thing and that's it
No need to worry about going into terminal for apps2sd
blahbl4hblah said:
I'll leave it at this, you'll flash ONE thing and that's it
No need to worry about going into terminal for apps2sd
Click to expand...
Click to collapse
wow... if that works, thatll be quite the feat indeed. We will still need to go into terminal emulator to move the apps though, i assume?
Related
I'm pleased to present my MoDaCo Custom ROM for the Samsung Galaxy S! READ THIS WHOLE POST BEFORE YOU START! No, really, it contains everything you need to know. wink.gif
This ROM is the 'starting point' for my Galaxy S custom ROMs.
About MoDaCo Custom ROMs
MoDaCo Custom ROMs are based on official ROMs - either shipping or leaked. A MCR release is designed to feel as far as possible like a stock ROM, with optimisations, tweaks and complimentary additions that enhance the user experience. The aim of a MCR is to be ultra reliable for use on an everyday device.
Requirements
In order to use this ROM on your device, YOU MUST ALREADY BE RUNNING THE JFB ROM FROM HERE. Do NOT use this ROM with any other base, unpredictable things will happen, the most likely being you'll have to reflash your device via Odin.
Features Included
* Based on the JFB release
* Rooted with Superuser 2.1 by ChainsDD
* Built with the MCR build process which reduces the size and boosts the speed of the ROM
* busybox with Droid Explorer support
* Updated Google Maps
* MCR version displayed in 'About' screen
* Optional Google Voice Search
* Optional Google Voice Dialer
* Optional Fancy Widget
* Optional Beebplayer
* Optional baked in Wavesecure via the online kitchen (installed to system partition for maximum security)
Changelog
Please see 2 posts below this one for the changes in each release.
Installation
To install this ROM:
* Ensure you have the JFB ROM installed (linked above)
* Download the zip file of your choice from the links below (or the online kitchen) and copy to your SD card named 'update.zip'
* Restart your device in recovery mode by running 'adb reboot recovery' (download adb if you do not have it already, use adb-windows, adb-mac or adb-linux as appropriate)
* Select the option to apply an update zip, and select the zip file you copied to your memory card
Upgrading
No wipe is explicitly required in order to use this ROM, however if you do encounter issues of any kind, it is recommended that you wipe your device and reproduce the issue before raising it here.
Downloads
This ROM is currently only available in the online kitchen - prebakes to follow.
Thanks
It's impossible to mention everyone who contributes to the Android community by name, but to everyone out there who does great work and shares it with us all - you have my gratitude and respect.
And finally...
If you would like to show your appreciation for the ROM, please consider supporting MoDaCo by signing up for a MoDaCo Ad Free or MoDaCo Plus account, both of which also give you early access to Beta ROM releases and access to the the online kitchens.
Enjoy!
http://android.modaco.com/content/s...rom-for-samsung-galaxy-s-with-online-kitchen/
Does this ROM fix the ram issue so that all 512MB of ram is utilized?
Congrats on being the first custom rom here.
Congratulations! I don't have a phone yet but I am very pleased to see a custom rom already!
woohoo custom ROMs already. Guess I'll be getting myself the phone after all.
umm.. but in another thread people where saying that it wasn't gonna be possible because samsung encrypt their drivers etc. so this mean they did release they drivers? and there is gonna be alot of custom rooms for galaxy gravity?
Perrosky said:
umm.. but in another thread people where saying that it wasn't gonna be possible because samsung encrypt their drivers etc. so this mean they did release they drivers? and there is gonna be alot of custom rooms for galaxy gravity?
Click to expand...
Click to collapse
No I said it would be near impossible to get roms from other sources like Sense roms or Froyo on because of the driver issue. I never said you would never see custom roms. The only roms you are going to see are one's based off of Samsungs release.
Hold on, hold on. So even though Samsung released the Galaxy S' driver source code to the public, it's going to be "near impossible" to port Sense and FroYo to the phone? I may be ignorant but I'll just ask with ignorance, how do you figure?
Javalu said:
Hold on, hold on. So even though Samsung released the Galaxy S' driver source code to the public, it's going to be "near impossible" to port Sense and FroYo to the phone? I may be ignorant but I'll just ask with ignorance, how do you figure?
Click to expand...
Click to collapse
Download the source code..... ok now open it and go to GalaxyS_Kernel.tar.gz. Now in there just enter the first folder then go to modules. Go to Dpram. Open up any of those files in notepad. You should see written non-compiled code right? That is fine now go back to the module folders and go to S3cbc. Now open up s3cbc_module.o. Does that look like non-compiled code? No it doesn't. It's either already compiled or encrypted. That's what I mean
psychoace said:
No I said it would be near impossible to get roms from other sources like Sense roms or Froyo on because of the driver issue. I never said you would never see custom roms. The only roms you are going to see are one's based off of Samsungs release.
Click to expand...
Click to collapse
Quick question, does that mean any custom rom that is release will be based off the official rom they release which has Touchwiz backed in? If so, does that rule out a plain vanilla android rom for this device? Thanks for your help and appreciate the knowledge.
Papa_I said:
Quick question, does that mean any custom rom that is release will be based off the official rom they release which has Touchwiz backed in? If so, does that rule out a plain vanilla android rom for this device? Thanks for your help and appreciate the knowledge.
Click to expand...
Click to collapse
No it doesn't rule out plain vanilla android rom. Yes they will all be based on Samsung but rom makers can take out all the touchwiz garbage and throw in another launcher like adw or Launcherpro.
That's what I wanted to hear. Thanks for the help. Now if I only could decide if I should keep the Nexus One or purchase this phone..... Decisions, Decisions.
psychoace said:
Download the source code..... ok now open it and go to GalaxyS_Kernel.tar.gz. Now in there just enter the first folder then go to modules. Go to Dpram. Open up any of those files in notepad. You should see written non-compiled code right? That is fine now go back to the module folders and go to S3cbc. Now open up s3cbc_module.o. Does that look like non-compiled code? No it doesn't. It's either already compiled or encrypted. That's what I mean
Click to expand...
Click to collapse
How lame. Have other handsets had similar problems?
what are talking about .o files and unix compiled modules same on all versions of unix. o stands for object module.
Javalu said:
How lame. Have other handsets had similar problems?
Click to expand...
Click to collapse
Yes the Behold 2, the original Galaxy, and the Moment all made by Samsung have only had Samsung roms on them.
lgkahn said:
what are talking about .o files and unix compiled modules same on all versions of unix. o stands for object module.
Click to expand...
Click to collapse
So they can easily be decompiled? If it's source code why is it already compiled?
dont go too deep into specific things that we may not even need (we are not coders here) but the source code for basic hardware that we need to get things going are already there.. things like camera, wlan, etc. btw, do u know what s3cbc is for?
raspdeep said:
dont go too deep into specific things that we may not even need (we are not coders here) but the source code for basic hardware that we need to get things going are already there.. things like camera, wlan, etc. btw, do u know what s3cbc is for?
Click to expand...
Click to collapse
What about s3clcd? Here is a little copy and paste of some of the garble that was in the compiled file
screen width=%d height=%d va=0x%x pa=0x%x
I would go out on a limb and say those are video drivers. The one's that have been encrypted on all other samsung phones.
Also in s3cbc there is some code at the bottom
PVRSRV_PIXEL_FORMAT_YUY2 PVRSRV_ERROR_FIFO_SPACE char ui32ByteStride psDevInfo PVRSRV_PIXEL_FORMAT_PAL1 PVRSRV_PIXEL_FORMAT_PAL2 pfnOpenBCDevic
If you don't know the Galaxy's gpu is PowerVR SGX540 and YUY2 is a colol format for video screens
http://www.fourcc.org/yuv.php#YUY2 and Pal is of course a European video standard.
they are not encrypted, they are object codes in machine language for arm.. and why we need that again for custom roms?
Wanted to test modaco ROM but they are not free.. Any kind souls upload and share ?
well feedback on the R1 rom its clean and smooth, worked even better when i did the stall tweak posted here
http://android.modaco.com/content/s...298/got-the-stalling-problem-rooted-try-this/
the phone seriously got 2 times faster, opening apps playing game very quick .. happy as here
Ferdimage said:
well feedback on the R1 rom its clean and smooth, worked even better when i did the stall tweak posted here
http://android.modaco.com/content/s...298/got-the-stalling-problem-rooted-try-this/
the phone seriously got 2 times faster, opening apps playing game very quick .. happy as here
Click to expand...
Click to collapse
How much free ram have you got? Considering flashing and rooting, but not sure if it's worth it right now. Meh 10£ isn't that much think I'm gonna give it a try.
EDIT: Just flashed, but now I don't have root access(says access denied when I try to access the /data/data folder). Thought this included the rooted PDA file or do I have to flash that again with odin?
EDIT2: Scratch that I forgot to press the allow-button on my phone after sending the Super-user request..
Hi guys, i'm back from exams with a fresh and funky release
This is the latest version of Desire Z Sense FRG83D - 1.72 (very close to stock). Basically everything is working and I have been using it for a couple of days now.
Speed should be WAY better than on Desire HD ROMs, but still not as fast as stock Desire, comes close though. Costs are some additional trash menu options, like the one for the hardware keyboard and no arrow keys on the on-screen keyboard.
Focus in this ROM is on battery life, free space in NAND and to be close to stock.
I have squashfsed some directories, which saves a lot of space. (Desire Z ROMs are a bit lighter than HD ones, because of the less capable hardware, but still space hungry). Finally got it down to use only 200 MB + (6MB free in /system, because mkyaffs2image does strange stuff), which means you will have ~230MB of storage space available for your user files (if you use the partitioning layout I supplied with the DFT flasher and depending on if you chose to use the EXTROM area/last 24 MB of NAND space in MAGLDR - if you have a TMOUS LEO you will of course have more). This is more than enough in my opinion, no need for apps2sd so far, but i may add it in the future.
You will be able to "overwrite" the squashfsed stuff in lib, framework and app, because i just used deep symlinking there.
Things i have removed (i can remember..):
Maps (it's an outdated version anyway - download a new version from Market)
eReader stuff + eBooks (takes 50 MB or so - WTF, not worth it)
Some commercial stuff
Most of the included wallpapers
All skins except Slate
Notes:
This ROM comes as ODEX-ROM, because that again saves a lot of space, which would otherwise be taken twice (once in davlik cache and once in /system/app / system/framework)
My own kernel is included, based on the latest linux_on_wince_htc git. It has the SMARTASS and INTERACTIVE governor, as well as support for CIFS and EXT4 (for those who need it)
Of course this ROM comes with RMNET enabled. My version of the libhtc_ril_wrapper allows you to choose between PPP and RMNET by file. If /system/ppp exists (create it with touch /system/ppp) then PPP will be used, otherwise RMNET. RMNET is working quite well, so i would suggest you use that.
If you want notifications working, install Led me know from market. I had battery drainage issues with it, so i removed it.
Known issues:
Currently none
Version 0.1 -> Multiupload
Important:
To all those having trouble flashing the ROM with Cotulla's flasher
Please go to Cotulla's thread and ask for help there, this is not the place for this.
Instructions taken from Cotulla:
1. download MAGLDR
2. download NAND Android ROM
3. Install MAGLDR to your LEO (ROMUpdateUtility.exe)
4. Boot LEO and select in the menu "4. USB Flasher"
5. Run DAF.exe on your computer. Do all steps.
6. Wait while it's flashing.
7. After flashing device will make auto-reset.
8. It should boot directly to Android.
9. If any errors happens, please report in Cotulla's thread, which is here.
Click to expand...
Click to collapse
Kernel sourcecode diff to linux_on_wince_htc: http://pastebin.com/FUsLfypk
So finally i want to thank some people.. Without you that all would not have been possible.
* Cotulla: for his great MAGLDR and trusting me while testing it.
* mdeejay: for supplying me with userspace stuff.
* Markinus, LeTama, Rajko and all the other great devs from #htc-linux who contributed
* Everyone else I forgot
Tell me your suggestions for improvements on this ROM in this thread please, not in PMs
If you want to buy me a beer you can do so by clicking the link in my signature. I put a lot of time in all this.
And of course buy Cotulla a beer, without him we wouldn't have come so far in that little time!
Great I will download and test it for you.........
third...... downloading. great work will test sounds good!
Testers please let me know how the call volume is on this ROM.
Thanks!
welcome back! your DHD was a big hit to me. will flash soon
Hey gauner1986, any chance of a non-squashfs'd, non-stripped build for those of us with T-Mobile US devices? Or is it possible to de-squash it ourselves?
The only thing I don't like about the Z series is the rotating homescreens. When they rotate back to port, it's like reloading all the homescreens from fresh and it takes a while. There's always a lag for the screen elements to appear. That's one reason I don't use the imilka Vision ROM and have been waiting for an updated HD.
thanks gauner.. i will download it now ..but please i need u to think to build one on glacier it is more looking and stable
Great TNX,
I will download and try it....
EDIT: would like this rom to support DATA2EXT
good work gauner. Fan of your work!
Keep it up bud.
What's about
bluetooth mac, wake up lag and streaming video (SPB TV)????
I'm currently running gauners hd rom... what would be better with this build?
Any improvement?
juergenn said:
What's about
bluetooth mac, wake up lag and streaming video (SPB TV)????
I'm currently running gauners hd rom... what would be better with this build?
Any improvement?
Click to expand...
Click to collapse
Speeds seems way better.
And I have 194Mb free Internal after first boot.
first contact : anoyng startup sound. very fast startup
I like sense but i don't like HD, it too big, so this is my best choice.
criszz said:
first contact : anoyng startup sound. very fast startup
Click to expand...
Click to collapse
Yes Gauner, get the HTC sound out please
NIce to see u back and ur great build! No support of A2sd+
Its led notification work?
Sent from my HTC HD2 using XDA App
Does this version have FM Radio? I didn't use it much in WinMobile, but I realize now that I miss it. Other than this, I will monitor the evolution of this ROM closely.
Hi Gauner, any chance of making your kernel work with an extended battery?
shree.cse said:
NIce to see u back and ur great build! No support of A2sd+
Click to expand...
Click to collapse
I know, it's 2bad, cant restore my apps with TitaniumBackup, I'm out of space....
Can't use this rom
Re-Introduce Orange Glacier 2.0.0
The reason I created this ROM is NOT TO COMPETE with anyone else, it is mainly for myself. I wanted a light weight ROM that's STABLE and FAST but I also wanted to try something slightly different.
I WON'T BE Updating this ROM unless something is Seriously WRONG with it...
(I WON'T BE taking FEATURE REQUESTS and such, most can be added by yourself from various mods found in the Theme and Apps sub forum )
So here it is: Orange Glacier ?!?!?!?
Why the name:
Because ClockworkMod Recovery (3.0.0.5+) for Gingerbread is colored Orange for EXT 4 partitions and since this ROM uses EXT 4 File System (FS) as its primary FS, I decided to name it this way.
So what is in this Orange Glacier?
1. Completely rebuilt from Stock Image
2. Uses exclusively EXT 4 FS
3. Moved all optional Apps to /data/app partition for easy uninstall (including most Google Apps)
4. Rooted, /system set to RW by default
5. Deodexed, Zip aligned all /system/apps and framework files using ROM kitchen from fellow XDA member.
6. Dalvik memory boosted from default 24MB to 36MB
7. Few CFS tweaks
I want to Thank the following:
TeamSilence for inspiring me to start it all,
Pack for the awesome battery mods,
dsixda for the easy to use ROM kitchen (highly recommended to anyone interested in cooking their own ROM, it CAN'T be easier than what he provided)
Installation:
The File ==> Orange Glacier Version 2.0 <==
WARNING: The INSTALLER WILL ERASE ALL USER DATA AND SYSTEM DATA!!!
Requirement: MUST HAVE CLOCKWORKMOD RECOVERY 3.0.0.5+
1. Reboot into recovery
2. Wipe Cache Partition
3. Install zip from SDCard
4. Once installation is completed, select Reboot System Now
Note: Upon first reboot may take up to 4~6 mins.
The following pre-installed Apps will need to be updated MANUALLY from Market by searching for their names:
Google Search
Youtube
Google Maps
T-Mobile MyAccount
T-Mobile TV
Qik Video Chat
TwonkyMobile
Google Street
All Built-in Games (Monopoly, NFS etc)
or they can all be easily un-installed because they are NO LONGER System Apps.
History:
[ Version 1.0.2 ] (Froyo Based)
Based on Original Stock MySense 2.0 Release
Critical Kernel Patch:
You MUST Apply this PATCH first In order to upgrade your ROM with future kernel updates from me...(You only need to do this EXACTLY 1 time, then afterwards you may update to my new kernel whenever they are available)
[Kernel Update Instructions]
The File ==> Orange Glacier Version 1.0.2 <==
[ Version 2.0.0 ] (Gingerbread Based)
Based on GB MySense 2.1 Leak Release
Included latest 2.6.35 GB kernel version 0.0.4 CFS Low Voltage
Standard Disclaimer: Not responsible for bricking your phone, voiding your warranty, or any other pain or suffering you may feel as result of using this ROM or Kernel!!!
If you find this ROM useful, feel free to hit the [Thanks] button below
Someone forgot about Dre...
Reserved 1.. just in case
putting it on right now lol nice too see u getting down in the mix besides just kernels
also trying it out now
Can you please if you don't mind to post some screenshots
I so need to get this
Sent from my HTC Glacier using Tapatalk
NICEGYPT said:
Can you please if you don't mind to post some screenshots
Click to expand...
Click to collapse
There's nothing special about this ROM.. It's mainly stock with the tweaks I mentioned in the OP...
stock is good for my battery i need battery more than fancy animations and all this gingerbread stuff
Sweet! Downloading now. Thanks Faux!
BTW, are there any known bugs/issues Faux?
Everything you have done is so amazing, so everything you do, we would pay special attention~~Tky Faux!!
nothing wrong basically itsstock with a few additions like battery mod and lil visuals here and there and speed up alot i dont feel no lag at all everything works idk bout ffc on qik cause my girl dont have but evrything is good to go
Well, this ROM gives me the best data speeds i have ever had. Unfortunately, every time that i reboot, it erases all of my screens. not sure why and OP says no support for this ROM. So i guess i will flash something else. It pains me to have to give up the data speeds.
cveez11 said:
Well, this ROM gives me the best data speeds i have ever had. Unfortunately, every time that i reboot, it erases all of my screens. not sure why and OP says no support for this ROM. So i guess i will flash something else. It pains me to have to give up the data speeds.
Click to expand...
Click to collapse
He actually stated no support unless something serious is wrong. That seems pretty serious if happening to others as well. I would love to load a "de-bloatwared" stock image with good speed and full functionality. I can't wait to hear more feedback on this one.
RA
just when I thought I was done with froyo forever. thanks faux, i feel OBLIGATED to give this a run.
Welcome to the ROM side of life Faux.
awesome!
Very excited to see faux grow as a dev I support faux's work 100% and cant wait to see future projects. CHEERS ---Team
Do I need to set up the ext4 or is it handled in the install?
yeaaaaaa Faux.... this is what i will be running until ginger sense comes out (if it ever will) thanks! this will be my first rom flash! your rom popped my phones cherry lol..... i love this!
+1
Anyone know the answer to this?
darinmc said:
Do I need to set up the ext4 or is it handled in the install?
Click to expand...
Click to collapse
+1
Anyone know the answer to this?
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 7 to the HTC Hero (GSM), or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 7?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
Official post
CyanogenMod:
Latest version: update-cm-7.1.0-Hero
Download: link
Mirror: link
MD5sum: 82efab7a2e7eb4fdd9c6257c9e8d3faa
Google Apps addon:
Version: gapps-gb-20110828
Mirror: link
Mirror: link
Version: Google Talk with video addon
Mirror: link
Mirror: link
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Downloading. Been looking forward to this.
Sweet! Can't wait for CM9, that will be amazing. I wonder if it will make its way to the Hero...
Sent from my HTC Desire HD using xda premium
sonnysoul said:
Sweet! Can't wait for CM9, that will be amazing. I wonder if it will make its way to the Hero...
Sent from my HTC Desire HD using xda premium
Click to expand...
Click to collapse
I guess were skipping CM8?
I had some problems with GAPPS and Market working correctly at first. A reflash of the GAPPS package solved the problem. I know with some other ROMs doing a reboot between flashing the ROM and flashing GAPPS helps to avoid similar problems, so might be wise to do.
Otherwise, everything is looking good so far. I like the new lockscreen.
Good job! i am using this ROM. faster! the kernel is 2.6.29, why not use 2.6.35?
forever571 said:
Good job! i am using this ROM. faster! the kernel is 2.6.29, why not use 2.6.35?
Click to expand...
Click to collapse
After playing around with the 35 kernel, I think 29's battery drain is more reasonable.
Although the slightly performance advancing is not noticed by me...
Does this rom support a2sd+? Thanks!
is there an option to change the screen density to 140 DPI? I tried a patch from the VanillaEclair thread, but this causes a loop at the bootanimation. The circle completes one full round and then freezes, causing the animation to start over.
Any advice please?
EDIT: I'll just use LCDDensity then
Thanks for the 7.1.0 Stable, working great till now
Again having bug with video on 71-st minute!!!!!!!!!!!!
another issue i have is that the market indicates google maps is incompatible with my device...
EDIT: Seems to be related with LCDDensity. I can install it if I set it back to the default value of 160. Weird...
I have issues with SIM pin code with stable release and nightlies, does anyone have same issues here?¿?
Perdita2000
.hansie said:
another issue i have is that the market indicates google maps is incompatible with my device...
EDIT: Seems to be related with LCDDensity. I can install it if I set it back to the default value of 160. Weird...
Click to expand...
Click to collapse
Yeah, it seems the lcd change makes some apps incompatible :/
sent with love from me to you
Downloading.. Will try it! Thanks!
forever571 said:
Good job! i am using this ROM. faster! the kernel is 2.6.29, why not use 2.6.35?
Click to expand...
Click to collapse
because it's an official stable release. the .35 kernel hasn't reached official stable release yet. the .29 kernel did reach that point a long time ago.
If you want groundbreaking tech, don't use this rom. if you want stable and solid and cool stuff compared to the stock hero, use this rom.
cheers
---------- Post added at 08:10 AM ---------- Previous post was at 08:05 AM ----------
official cm roms do not come with the following hacks:
- ext based apps2sd
- dpi changing
- launchers other than the free stable version of adw
- kernels other than the current main stable kernel (which is the old .29 kernel but highly modified of course, either it is fly13 or is very similar to it)
if you want this rom but with cool addons and extra features and a sexier/faster/smoother launcher and more active xda-based support, use elelinux cm7 3.5 (or later). it's the same basic rom but with his cool UI mods, a2sd, and so on.
Elelinux is the official gsm hero cyanogenmod developer anyhow so you know you're getting the best of the best with his cm roms
But this is certainly a cool rom if you don't like ext partitions or smooth launchers. I tried it and it was solid and stable. I prefer ele's 3.5 rom though for it's extra features.
Interesting reading about how so many Heros' are affected differently.
What really surprised me was that when I installed Ele CM7-3.5.1 and doing a full wipe of all over GOku 1.3e, Ele's rom booted up with all my apps including all Google apps, right at the the first boot???? I was amazed, never having this happen to me before.
Anyway, I have tried most of the latest roms, mainly GB and Froyo but I just keep coming back to GOku 1.3e or VE6.1 because I have also found odd things happening on the other roms. They all excell at doing most of the stuff that I need from a working 'phone. These things do take time and the developers really are amazing.
VE6.1 for blazing fast and stable and GOku when I need better sound for music.
davrave said:
Interesting reading about how so many Heros' are affected differently.
What really surprised me was that when I installed Ele CM7-3.5.1 and doing a full wipe of all over GOku 1.3e, Ele's rom booted up with all my apps including all Google apps, right at the the first boot???? I was amazed, never having this happen to me before.
Anyway, I have tried most of the latest roms, mainly GB and Froyo but I just keep coming back to GOku 1.3e or VE6.1 because I have also found odd things happening on the other roms. They all excell at doing most of the stuff that I need from a working 'phone. These things do take time and the developers really are amazing.
VE6.1 for blazing fast and stable and GOku when I need better sound for music.
Click to expand...
Click to collapse
Only way that can happen is if you didn't wipe ext partition. In cwm recovery that is automatic. In amon-ra you have to do it manually every time. Although in this case it wasn't a problem since they were similar gb roms so compatibility issues didn't affect you.
Sent from my HTC Hero using Tapatalk
I had the same experience with flashing Ele's 3.5.1 over Goku's 1.3e. Apps were the same, even email was setup for hotmail. I figured I'd missed a wipe but am pretty sure I'd done it. I generally wipe twice between new roms, but perhaps I'd missed something. I use cwm every time.
dkelley said:
Only way that can happen is if you didn't wipe ext partition. In cwm recovery that is automatic. In amon-ra you have to do it manually every time. Although in this case it wasn't a problem since they were similar gb roms so compatibility issues didn't affect you.
Sent from my HTC Hero using Tapatalk
Click to expand...
Click to collapse
I so enjoy learning new things about my 'phone. Thanks DKelley. Dude, you have to be fastest typist I've seen. How do you manage the time to reply to so much stuff? Awesome
Well, here we go...
This is not the way I wanted to post this thread, but fate was stronger than me
Guys, I spent last several months working on a stable Sense 4.1 base for our HD2. I succeeded in a lot of things. I got BT working. I got mic working in applications. I got this damn thing running smoother than my wife's Galaxy S3 (I'm not kidding)...
So, yesterday my HD2 died on me. For the second time. I can't afford to fix it anymore, I don't have neither time nor money for that. Mainly time... So, unfortunately, I have to stop the development right here.
Someone, please take it from here. It would be a real pity for me if this ROM died together with my HD2.
Guys, as you can see further in this thread, someone donated a fully working HD2 to me. Just like that. For free.
If you ask me, this is an act of an incredible generousity.
Thanks a million, Legion.X. I'm still to find a way to thank you.
Let the development continue!
Introducing Common Sense 4.1
link to ver. 0.2:
http://www.mediafire.com/download/75m6jwtcq28gg8u/CommonSense41_next.zip
please test and comment.
previous versions:
ver 0.1: https://mega.co.nz/#!WhpRzJQa!DOdybh...6N52mPTfNkXk1k
what works:
* full Sense 4.1. almost everything works. daily driver.
* silky smooth, as good as native. flies at 20-30FPS with live wallpaper, probably around 60FPS with still wallpaper
* fast and snappy.
* sound recording works. voice input works. BT works.
* full 3D Rosie
* live wallpapers, Sense lockscreens etc.
* EXT2 over YAFFS loop (works automatically out of the box)
* should be snappier than ver. 0.1
known problems:
* it does reboot randomly from time to time. I'm looking for ways to solve these... looks like we'll end up recompiling libs from source.
ANYONE WHO HAS EXPERIENCE AND/OR WORKING ENVIRONMENT TO RECOMPILE FILES FROM SOURCE, PLEASE PM ME. My goal is to take gralloc sources from CM9 and adapt them for sense. but I don't have linux and don't have the toolchain set up. I'd appreciate any help with this.
* probably won't work in full NAND on TMOUS. anyone who wishes to participate, please try to install on TMOUS without sd-ext and report what you get. logcats are most welcome!
* WiFi router doesn't work. Custom routers from Play Store should work.
* Video shooting works at 15FPS. Don't know if that can be fixed... for me 15FPS is fine anyway
next steps:
* hopefully fix some of the crashes
* fix terrible lags during initial configuration and in the setup wizard
* improve Rosie (I know how to make it even smoother )
* try crossbreeder
* install XPosed framework
* please suggest more things to improve!
installation:
* BACKUP!!!
* IMPORTANT: you need CWM 3.0.0.6.. Other recoveries may or may not work. voronkov_pavel reports that CWM touch recovery beta 8 does not work with this ROM.
* REMEMBER: for Data On Ext, keep your system partition small! philliped364 reports that 55MB works just fine
* install Common Sense from recovery
* reboot. the first boot will take a while (although it's waaaay faster than in other ROMs thanks to odexing). should boot in 2-3 minutes. if it doesn't boot within 10 minutes, please report
* wait for the lockscreen to appear. DON'T PULL THE RING YET!
* make some coffee. let your HD2 settle down for at least half an hour
* pull the ring to unlock. if the setup wizard does not appear immediately, don't touch the device for another half an hour. if the device reboots by itself, please report.
* complete the setup wizard. it will lag. please be patient. DON'T SIGN IN TO YOUR GOOGLE ACCOUNT YET! finish the wizard and let Sense load.
* wait for two minutes and reboot
* let it settle down for another half an hour. it will optimize the databases during that phase. don't try to work with the device. it will lag terribly.
* unlock, go to Settings -> developer's settings, scroll down, disable "force GPU rendering"
* reboot
* your device should be fully functional now. now go to Settings -> accounts and sign it to your google account, email and whatever you like
big thanks to Legion.X (for sending me his HD2 for free), philliped346 (for his immense help and making my ROM nativeSD), saurabhrendale (for his incredible animations), Mr Evil (for letting me kang sound files from his EvoHD2 ROM), ckpv5 (for letting me kang Sense files from his MyOneDx ROM), dorimanx (for his kernel), RobbieP, ya5, aazzam16661, Daekin and many, many others for helping me out.
Some technical details about the ROM:
Config: Data on Ext, DB on NAND, looped over EXT2.
System: mostly taken from other Sense 4.1 devices, proprietary files taken from several half-working Sense 4.x ROMs flying around here. Sound system taken from EvoHD2 ROM (yeah, CM9). Credits to Mr Evil for these files.
Kernel: Dorimanx 7.2 HWA (credits to Dori please)
Framework: stock Desire X ROM as a base, heavily modified to work with CM9 sound system, heavily optimized for smoothness.
Sense: mostly myONEdx RC4.0 FX+ ROM. Rosie modified by me. Some files taken from stock Desire X ROM.
A word about kanging:
my goal is to create a stable Sense 4.1 base for HD2. feel free to kang anything you find here. just please PLEASE give proper credits. don't forget the guys who gave me some of the files: Mr Evil (creator of the EvoHD2 ROM) and ckpv5 (creator of the MyOneDx ROM)
NOTE for DEVs:
I was stunned to discover that DISABLING HW acceleration makes scrolling silky-smooth in 99% of the applications. Exceptions are: Rosie, Browser and... uh... that's it, I think. So, I REVERSED the way framework enables HW acceleration. Here's how: if the application doesn't request HW acceleration, it doesn't get it by default. If it requests it (HWAcceleration=true in the manifest), it DOESN'T get it either. If hwAcceleration=false in manifest, it DOES get it. This way, I only had to modify Rosie and the Browser and set hwAcceleration=false for them to actually GET the acceleration. The other apps just denied the acceleration natively. Please be aware of this change
Enjoy.
Report bugs.
May the Force be with you
thelonewolf_pav said:
Well, here we go...
This is not the way I wanted to post this thread, but fate was stronger than me
Guys, I spent last several months working on a stable Sense 4.1 base for our HD2. I succeeded in a lot of things. I got BT working. I got mic working in applications. I got this damn thing running smoother than my wife's Galaxy S3 (I'm not kidding)...
So, yesterday my HD2 died on me. For the second time. I can't afford to fix it anymore, I don't have neither time nor money for that. Mainly time... So, unfortunately, I have to stop the development right here.
Someone, please take it from here. It would be a real pity for me if this ROM died together with my HD2.
Here's the link. Enjoy.
http://d-h.st/7MZ
Disclaimer:
Frankly, I don't even know if it boots the way it is now. I was in the middle of something when this happened. Most probably, it will just work though.
Technical details:
Config: Data on Ext, DB on NAND, looped over EXT2. Yeah, it's returded fast.
System: mostly taken from other Sense 4.1 devices, proprietary files taken from several half-working Sense 4.x ROMs flying around here. Sound system taken from EvoHD2 ROM (yeah, CM9). Credits to Mr Evil for these files.
Kernel: Dorimanx 7.2 HWA (credits to Dori please)
Framework: stock Desire X ROM as a base, heavily modified to work with CM9 sound system, heavily optimized for smoothness.
NOTE for DEVs:
I was stunned to discover that DISABLING HW acceleration makes scrolling silky-smooth in 99% of the applications. Exceptions are: Rosie, Browser and... uh... that's it, I think. So, I REVERSED the way framework enables HW acceleration. Here's how: if the application doesn't request HW acceleration, it doesn't get it by default. If it requests it (HWAcceleration=true in the manifest), it DOESN'T get it either. If hwAcceleration=false in manifest, it DOES get it. This way, I only had to modify Rosie and the Browser and set hwAcceleration=false for them to actually GET the acceleration. The other apps just denied the acceleration natively. Please be aware of this change
Sense: stock Desire X ROM. I've got permission to use MyOne ROM (see Desire X forum), it has full 3D effects enabled and runs smooth as silk on HD2 (it's pretty damn smooth even with live wallpapers!)
What should work:
Everything. I know that WiFi router doesn't work, but that's it, more or less. Video shooting works at 15FPS. Sound recording works. Voice input works. BT works.
Known problems:
It does crash from time to time. Needs more work on system files. I was planning to recompile gralloc from CM9 to use it here, but didn't have the privilege to finish that.
For EXT2 loop to work, one needs to add creation of an empty data.img file in /Data/Data folder. Make it as big as possible. Format it for Ext2. The rest will be done by init.rc
............. Well, that's it. I'll be watching this thread. Don't ask me to develop anything though, I can't do anything without a working HD2. Sorry guys and good luck to anyone who will take it from here.
Bye
Click to expand...
Click to collapse
I will continue your hard work with Daekin
I've been working on Desire X Sense 4.1 port so, this will fix BT for us(build prop)
Thanks
Cant Install
Hello,i tried installing this rom but i couldnt..i get E:error in sdcard/commonsense41..zip(status6) any ideas?
blackphoenix50 said:
Hello,i tried installing this rom but i couldnt..i get E:error in sdcard/commonsense41..zip(status6) any ideas?
Click to expand...
Click to collapse
I cannot check for an obvious reason, but my gut feeling tells me that you downloaded a corrupted file. Try to open it with winzip. if it opens, extract the files and pack them back.
or just download again....
thelonewolf_pav said:
I cannot check for an obvious reason, but my gut feeling tells me that you downloaded a corrupted file. Try to open it with winzip. if it opens, extract the files and pack them back.
or just download again....
Click to expand...
Click to collapse
I did all these but still cant install.....tried also with twrp it gave me an error about updater binary...i searched at google and i think that the problem is the updater-script file...could someone plz check it cz i dont have the knowledge for that....
thelonewolf_pav said:
Well, here we go...
This is not the way I wanted to post this thread, but fate was stronger than me
Guys, I spent last several months working on a stable Sense 4.1 base for our HD2. I succeeded in a lot of things. I got BT working. I got mic working in applications. I got this damn thing running smoother than my wife's Galaxy S3 (I'm not kidding)...
So, yesterday my HD2 died on me. For the second time. I can't afford to fix it anymore, I don't have neither time nor money for that. Mainly time... So, unfortunately, I have to stop the development right here.
Someone, please take it from here. It would be a real pity for me if this ROM died together with my HD2.
Here's the link. Enjoy.
http://d-h.st/7MZ
Disclaimer:
Frankly, I don't even know if it boots the way it is now. I was in the middle of something when this happened. Most probably, it will just work though.
Technical details:
Config: Data on Ext, DB on NAND, looped over EXT2. Yeah, it's returded fast.
System: mostly taken from other Sense 4.1 devices, proprietary files taken from several half-working Sense 4.x ROMs flying around here. Sound system taken from EvoHD2 ROM (yeah, CM9). Credits to Mr Evil for these files.
Kernel: Dorimanx 7.2 HWA (credits to Dori please)
Framework: stock Desire X ROM as a base, heavily modified to work with CM9 sound system, heavily optimized for smoothness.
NOTE for DEVs:
I was stunned to discover that DISABLING HW acceleration makes scrolling silky-smooth in 99% of the applications. Exceptions are: Rosie, Browser and... uh... that's it, I think. So, I REVERSED the way framework enables HW acceleration. Here's how: if the application doesn't request HW acceleration, it doesn't get it by default. If it requests it (HWAcceleration=true in the manifest), it DOESN'T get it either. If hwAcceleration=false in manifest, it DOES get it. This way, I only had to modify Rosie and the Browser and set hwAcceleration=false for them to actually GET the acceleration. The other apps just denied the acceleration natively. Please be aware of this change
Sense: stock Desire X ROM. I've got permission to use MyOne ROM (see Desire X forum), it has full 3D effects enabled and runs smooth as silk on HD2 (it's pretty damn smooth even with live wallpapers!)
What should work:
Everything. I know that WiFi router doesn't work, but that's it, more or less. Video shooting works at 15FPS. Sound recording works. Voice input works. BT works.
Known problems:
It does crash from time to time. Needs more work on system files. I was planning to recompile gralloc from CM9 to use it here, but didn't have the privilege to finish that.
For EXT2 loop to work, one needs to add creation of an empty data.img file in /Data/Data folder. Make it as big as possible. Format it for Ext2. The rest will be done by init.rc
............. Well, that's it. I'll be watching this thread. Don't ask me to develop anything though, I can't do anything without a working HD2. Sorry guys and good luck to anyone who will take it from here.
Bye
Click to expand...
Click to collapse
wow, nice job!
blackphoenix50 said:
I did all these but still cant install.....tried also with twrp it gave me an error about updater binary...i searched at google and i think that the problem is the updater-script file...could someone plz check it cz i dont have the knowledge for that....
Click to expand...
Click to collapse
There are a few double brackets in there. Mike_1996 noticed a few in this thread http://forum.xda-developers.com/showthread.php?t=2694879 thanks Mike. I spotted a couple more.
https://dl.dropboxusercontent.com/u/24033707/updater-script
Not tried this yet but looking forward to it, sad news about phone though, thanks.
updater-script modified http://www.mediafire.com/download/q8wt2wlh8aaokf8/updater-script.zip
modified with notepad++
now boot fine but take a long time !
i have installed with 5/40/5 partition clk 1.5 and ext4 2100 mb.
wifi don't work for me
bluetooth also
and comcorder
http://www.mediafire.com/download/zu1sz8u4qz7vwdr/commonsense4.1.zip
an image !
philipped346 said:
updater-script modified http://www.mediafire.com/download/q8wt2wlh8aaokf8/updater-script.zip
modified with notepad++
now boot fine but take a long time !
i have installed with 5/40/5 partition clk 1.5 and ext4 2100 mb.
wifi don't work for me
bluetooth also
and comcorder
http://www.mediafire.com/download/zu1sz8u4qz7vwdr/commonsense4.1.zip
Click to expand...
Click to collapse
does the recent apps appear when you long press the home button?cz i think its an essential feature...
I would just remove menu button and assign that to recent apps. that is the modern way. (not Samsung dinosasur way )
For system crash could be kernel fault... I remember when I tested dorimanx kernel each release was never really 100% stable independently from clock frequencies.
II test this rom of dungphp with tytung kernel (thank to all) and this is the same with sense 4.1 .
wifi/3g , camera , bluetooth , sound work .
camcorder don't work and google play work with uptades but can't instal news applications.(fixed instal apk
)
it's a very smooth rom and if someone can fix this problems .
View attachment 2656090
View attachment 2656091
this the link of one s ics2ville:removed
I have installed system on nand with dataonext (initrd intégrated) 5/370/5 :silly:
I have updated Google play in new installation and now it's OK.
new link http://www.mediafire.com/download/c8ds4r7g7qd7n5e/one_s_ics.zip
zenida said:
For system crash could be kernel fault... I remember when I tested dorimanx kernel each release was never really 100% stable independently from clock frequencies.
Click to expand...
Click to collapse
Dorimanx's kernel haven't given me one single problem with this ROM.
I used it as my daily driver until my HD2 died...
zenida said:
I have installed system on nand with dataonext (initrd intégrated) 5/370/5 :silly:
I have updated Google play in new installation and now it's OK.
new link http://www.mediafire.com/download/c8ds4r7g7qd7n5e/one_s_ics.zip
Click to expand...
Click to collapse
if you're using my ROM (I couldn't figure this out from your post), and use my initrd, then you have to make your system partition as SMALL as possible. Most of system files are relocated to EXT4.
For camcorder to work, copy it from any CM9 ROM.
Sense camcorder tries to record at 30FPS, which doesn't work with this version of stagefright. CM9 camcorder records at 15FPS and works flawlessly
thelonewolf_pav said:
if you're using my ROM (I couldn't figure this out from your post), and use my initrd, then you have to make your system partition as SMALL as possible. Most of system files are relocated to EXT4.
For camcorder to work, copy it from any CM9 ROM.
Sense camcorder tries to record at 30FPS, which doesn't work with this version of stagefright. CM9 camcorder records at 15FPS and works flawlessly
Click to expand...
Click to collapse
your rom is very smooth but i can't have wifi/3g working , it's a problem
philipped346 said:
your rom is very smooth but i can't have wifi/3g working , it's a problem
Click to expand...
Click to collapse
this is really strange. I had wifi and 3g working without any problems. I use both of them daily...
are you using magldr or clk?
what's your system size?
did you look at the logcat?
I use clk 1.5 and système size 5/40/5 .
Sent from my Nexus 5 using XDA Premium 4 mobile app
philipped346 said:
I use clk 1.5 and système size 5/40/5 .
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
interesting.
can you use ADB? if yes, try to:
cd /data
chmod -R 777 data
chmod -R 777 system
let me know if that changes anything
I test tomorow now i watch football .
Sent from my Nexus 5 using XDA Premium 4 mobile app