Develop Bugs

help needed for ps3 jailbreak.

hi all i have a problem and it is driving me nuts to fix it, the only people that can help me is you boys so pls do.
i ve read several dorums and no joy i dont no what im doing wrong.
let me start.
I have a htc touch pro (raph100)
running energy rom.
my android verion is Android 2.2 Froyo][CyanogenMod 6. requires to partitions.
1q.Sdcard
2.ext2
ive copied psfreedom files modudles zimage and psfreedom.ko to my sdcard.
ran gscript or terminal, but i get the error message unable to insmod psfreeom.ko.
before i changed my android version, i was run xdandriod, with config changfe and was loading fine, when it used to tell when to disconnect from usb.
ive gone with Android 2.2 Froyo][CyanogenMod 6 because it looks better and runs better,
is there a way i can run the ps jailbreak hack with this android version.
i look forward to all the help please, and can you provide files that i need to make this work for me.
Thank you all
Dal.

did u remove ur old modules.zip, when u copied the one from psfreedom to ur SD Card? happened to me the first time i tried to install psfreedom.ko
and the installation is a little vague. if u dont get a message, just an extra line or two, its installed ok. you can confirm that it's installed, by trying to install it again and getting an "already exists" message
Btw im not using cyanogen (but still using a rom, which requires partioning), so i cant guarrantee what i said will work for you

Also, you should post in that thread instead of creating a new one. Might be a good idea to do some searching/reading in said thread.

Please help Tbolt Root

So I have gone as far as I can get myself installed ADB and eclipse, along with the hello world tutorial. My problem currently is which drivers do I use for the phone? It asks me if I want to install verizon drivers upon connecting phone, do I need these? I installed google drivers via ADB
Thanks for helping out a n00bie

Here is what my device manager screen looks like. I have F driver working, is this the correct driver I need? What about the mass storage controller warning? can I ignore this?

okay went to htc.com and downloaded drivers....phone is recognized now. I have adb all setup so hopefully I can get there now.

wow! I made it through the hello android tutorial so everything seems synched up as far as adb goes. Now Im not really sure how to prepare for the rest. Anybody that has completed this process that could help?
Whats the link for chat?

thunderbolt root
go here----> chat.andirc. net channel = root
you will thank me later lol

normal cmd commands not working on pc after root

so i sucessfully rooted my DZ but i have a problem with my computer now after i rooted, i have a fair idea of what caused the problem but dont know how to fix it.
CMD commands dont work on my computer (like ipconfig and ping etc) giving an error that "ip config" isnt a recognized as an internal or external command.
i think the issue is due to changing the "Enviroment Variables > Path" on my computer as it was in the guide i was following to make things easier, i removed the default path and replaced it with what i have now being
C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\PROGRAMS\Other\HTC\SDK\platform-tools;C:\PROGRAMS\Other\HTC\SDK\tools;C:\Program Files\Windows Live\Shared
however i think there may be a command i deleted that i need.
if anyone has any suggestions please post your advice
thanks in advanced Penfold

Add this to it:
%SystemRoot%\system32;%SystemRoot%;
-Nipqer

Ouch, yeah ... what Nipqer said will fix the cmd problem but if there were any other paths set up by other applications you might run into more problems down the line. The guide wasn't stating to replace the paths but to add to them by adding '; c:\new_path\'.
You might just want to roll back with System Restore if there's a very recent one and then readd the adb path properly.
Sent from my HTC Vision using XDA App

Good Idea with system restore.
Looking at my Path the only other ones neccesary are possibly nvidia drivers.
-Nipqer

ok will do, so i dont have to make a new topic ill ask here...
does any1 know of any app that can give me notifications via the LED light.
ive tried LED me know but i dont think that works (the notification is always the same no matter what option you try)

I tried LED me know without any success on my G2. I currently use MIUI and LED notifications work for all apps.
Sent from my HTC Desire Z using XDA App

unlocking question due to the amount of threads

can someone please assist me with a possible stupid question?
i want to know if getting an unlock code say from tmobile would work on just the phones i have or for anyone in general within that network?

jwpjxp05 said:
can someone please assist me with a possible stupid question?
i want to know if getting an unlock code say from tmobile would work on just the phones i have or for anyone in general within that network?
Click to expand...
Click to collapse
usually phones are locked by imei no. so will work only for that phone
if you try this on other phones is to get an error message only -so will not hurt to try but no results also if you try 3-5 times an unlock code phone is hard locked - only service tools(/unlock box/dongle) can reflash /unlock it

stupid noob question
u said unlock box/dondle? what are those? service tools.
so i guess my question is this. is the unlock code somewhere on the phone is there a way or person who can help me find it without going through tmobile

jwpjxp05 said:
u said unlock box/dondle? what are those? service tools.
so i guess my question is this. is the unlock code somewhere on the phone is there a way or person who can help me find it without going through tmobile
Click to expand...
Click to collapse
it's hard-coded in radio firmware you can't find it so easy also it depends of your phone model i.e. look here to see how to unlock a galaxy i-9000 phone

ok im working with the garminfone on this project. and when adb it doesnt recognize this device. any clue on how to arrange it so it does. it will connect to the computer and i can see the files from there but it just will not be found as a device through adb

jwpjxp05 said:
ok im working with the garminfone on this project. and when adb it doesnt recognize this device. any clue on how to arrange it so it does. it will connect to the computer and i can see the files from there but it just will not be found as a device through adb
Click to expand...
Click to collapse
as I said you will not solve that problem...
to make Garminfone to work on PC install Android SDK and phone drivers (from CD or Garmin site or just install sync software and you get it) after installing SDK and drivers you should get ADB interface working check this by running adb check from console (cmd.exe) don't forget to add adb location to system path or just enter adb.exe folder before usually the folder is ~\android-sdk\platform-tools\
now check your ADB interface is working open cmd.exe in adb.exe folder then
Code:
adb devices
if you don't get this your phone will not work with PC
don't forget to activate usb debugging on phone

Bootloading not working..or is it :)

Hello my name is austin and im running windows 8.1 ya i know why would i want that..well its fast sooooo..any whooo i have rocket chip 3066 based tablet and im trying to get it to get into bootloader mode witch I DID but it ended up saying device discriptor error on the usb devices SOOO i found the hub it was connected to and disabled it then it made the rock chip show up on the list of devices i opened rk batch tool as a test and would you know it was green well thats not the tool i have to use to flash this kernel i have to use the regular rk andriod tool..but when i open it it says no rk andriod usb device detected...is that weird? any how i need to get this to work..someone any one? have any ideas as to why? yes iv reinstalled the drivers and tryed 17 differnt ones and the only one that works is the rk usb driver i got from rk site.
i really have no idea how to make this work..so i tryed the rk batch tool and tryed to see if i could get it to do any thing.. so i clicked the swtich button but it said this is not supported..well it was dumb for me to try sense its allready in flash mode but still...i fill like somthing is wrong.
any help? ohh im using the GAME MID tablet
(EDIT(
GOOD NEWS EVERY ONE i figured out why the other programs would not regonize it so i went into the settings .inf file and changed the usb11 thing to 1 and then it WORKED!
but when i tryed to flash the kernal and recovery img files in the tool it showed the out put but said info start run . start to test. test device failed. run failed....this is so close..i hope someoen can help me im using a kernal edited by OMA he did it just for me and said to just flash the TUVVA kernal and the rocvery img provided by him and us the correct paths I DID and the address..witch i did.. :/ i hope someone knows SOMTHING

pl
Bump

ummm
No one can help??????

excellent my friend, but in other problem could you please put the specifications device?