Develop Bugs

Help, vogue needs flashing to cricket!!! Broken usb pin not able to connect to pc

HI, i recently change service from sprint to cricket, i have a htc sprint touch, i accidentaly broke one of the usb pins on my phone, i need to fully flash to cricket. is there any other way? already loaded the cricket prl only text and talk work, as i used my memory card to uploaded it. how can i unlock it so i can load a custom rom with a memory card?
can i use activesync with bluetooth to run the unlocker?

ive tried active sync with BT and didnt have much luck but if you can get it to connect you should be ok ( im just assuming here)

xcaliburpcs said:
HI, i recently change service from sprint to cricket, i have a htc sprint touch, i accidentaly broke one of the usb pins on my phone, i need to fully flash to cricket. is there any other way? already loaded the cricket prl only text and talk work, as i used my memory card to uploaded it. how can i unlock it so i can load a custom rom with a memory card?
can i use activesync with bluetooth to run the unlocker?
Click to expand...
Click to collapse
I don't think you can flash the ROM via bluetooth, but I could be wrong. One thing you can do is flash the ROM/unlocker directly from the memory card in the phone. From what I understand it needs to be a non-HD card (usually 2gb or less) and also needs to be formatted FAT32. Then you can download the 'imcokeman' unlocker, decompress it and pull out the *.nbh file. You will have to rename this to VOGUIMG.nbh and put it in the root folder of the card. Then when you activate the bootloader, by POWER>CAMERA>SOFT RESET it will load the NBH. Then you can also put a custom ROM on this way too...just pull the nbh file from what you get, and follow same procedures after the phone is unlocked. I've never done this before, but I have read where people have done it successfully. If you need more info reference this thread http://forum.ppcgeeks.com/showthread.php?t=20370&highlight=memory+card.
You can also d/l the unlocker there. The area where they are talking about using memory cards is like post 260 or so...good luck. Let me know if you're still stuck.
Also there's a great write up on the process here http://forum.ppcgeeks.com/showthread.php?t=17473.

I tried that it just gets stuck in bootloader, it says "loading..." and nothing happends. what am i doing wrong?

xcaliburpcs said:
I tried that it just gets stuck in bootloader, it says "loading..." and nothing happends. what am i doing wrong?
Click to expand...
Click to collapse
1. Format your MicroSD card to FAT32 (YES - FAT 32 32 32!! not just plain old FAT) (again, this is not required if your card is already fat32; it is ok to have other data on the card). I have read that the card needs to be 2gb or smaller, though I'm not sure how much truth, if any, there is to that...
2. Extract the .NBH you desire to flash from the exe or zip or w/e put it on the microsd card rename it from RUU_signed.nbh to VOGUIMG.NBH
3.Put the MicroSD card in your phone and Get To the BOOTLOADER screen (camer+power+reset) it should then start updating with the .NBH on the SD card and the procedure should begin automatically.
you can also use this procedure to unlock your phone by flashing the .nbh from Cokemans unlocker just extract it and rename it VOGUIMG.NBH or if your stuck at that HTC screen and cant sync because your phone wont boot up.
---This really the best info I can give you...just double check everything you are doing to make sure that you are doing it right. As I said I have never done the unlock process this way, but many people have. Check the second link I gave you in my original post if you need more help...they'll be able to help you I'm sure.

I have done all of that but my phone just gets stuck at the loading grey screen and nothing happends. my phone has the latest rom from sprint. its the 6.1 and I installed it by the bootloader mode with the micro sd card. anything else I can do? if not I found a guy who can repair my mini usb port, but hes about an hour away.

You'll probably waist more time trying to figure this out. I would just drive the hour and get it fixed. It would be more of an investment really especially once you re-sale it for a new phone.
Plus re-programming the phone becomes a whole lot easir 8p

Yeah, that was my Idea, either replace it or fix it. maybe sale it as is and replace it for the touch pro.hmmm, lifes hard choices. what to do...what to do? 8 (

rzawora said:
you can also use this procedure to unlock your phone by flashing the .nbh from Cokemans unlocker just extract it and rename it VOGUIMG.NBH or if your stuck at that HTC screen and cant sync because your phone wont boot up.
Click to expand...
Click to collapse
so i just copy cokemans unlocker to memory card rename it and run it like i would do for a rom?

still waiting for someone to answer this please

[Q] SIM Menu Bug in CM7

Guys,
I've installed the CM7 ROM, everything works fine, all great.
Just have one problem: I am using a DualSIM adapter and with this adapter, the SIM is changed by a SIM Menu. The SIM Menu opens correctly but whenever I try to choose one option in this Menu, nothing happens... Did anyone experience the same problem? Or can you try to use anything in your SIM Menu just to check if it is working?
Thanks in advance

DualSIM - STK Toolkit
bethnard said:
The SIM Menu opens correctly but whenever I try to choose one option in this Menu, nothing happens...
Click to expand...
Click to collapse
I have exactly the same behaviour (Beta 6). SIMTookit support has been added in Beta 5 and as far as I remember it worked with that version, but I am not sure.
I also tried a nightly (110601-2348), same result.
It definitly worked with previous installed pays rom (4.0).
Currently i use it with the 007 option :
In this mode, you have to save a contact with number 001 (or 002) to your SIM card to switch to SIM 1 (or 2).
I had to place the adapter in a different phone to enable this mode.
I have a "MAGICSIM 3G", but as far as I have read in different forums, the SimToolkit application has the same functionality accross all suppliers.
Currently i use the "Copy To Sim Card.apk" for switching. It is not ideal, but it works. A second problem is, that the phone always reboots after switching.
With pays rom it only rebootet while switching from SIM2 to SIM1.
In general, the STK Toolkit support seems to work, because one of my SIM has a SIMToolkit application stored on the SIM to access some provider specific services. This application runs as intended.

[Q] deleted htc framework file and phone doesnot start.

After rooted my htc One X. In the process of removing at&t crap ware I accidentally deleted something that said htc frame work.
From then on my phone would not start. I unlocked my phone as well. How ever I didnot have any custom ROM installed or didnot have any back up done.
When I tried to reboot my phone after deleting the htc frame work file, it would not start. HTC icon would show up and it would not go further.
These are the things I did.
1. I flashed CWM.
2.I flashed TWRP.
3.I finally flashed CWM. 5.8.3
Then I went to fastboot mode and
removed Dalvik Cache, Erased the sd card
and tried to 'mount usb storage' but it would say
"unable to open ums lunfile(no such file or directory)SD card space free:10169MB"
My phone though shows as a removable disk , when i click on the icon it would say " Please insert disk into removable disk." I tried to save a custom ROM on my memory card and flash it but my system doesnot detect my phone.
Can some one please help me?
Thank you.

You have to relock your HOX and go back to your providers stock rom via the orginal ruu.
This is the only way to restore your mobile.

in00b said:
In the process of removing at&t crap ware
Click to expand...
Click to collapse
You're in the wrong forum, this is for the Tegra3 One X, which is not sold by AT&T.
Which means you've probably installed an incompatible recovery image, but then, since you can't unlock at htcdev... Who knows what you've done.
Anyway, go visit the forum for your phone and they'll help sort you out.

[Q] Xperia S, Sim card Removed and no network problem

Hi all, I'm having lot of troubles with an Xperia S phone.
Finally get to install the Cyanogen10 rom on it, but when it boot, I unlock it and insert the pin code as usual, after that I get this "error":
- SIM card removed
The mobile network will be unavaiable until you restart with a valid sim card inserted. (in the bottom of it there's a Restart Button)
No network service also when I try to connect manually to my provider network.
Also tried a Factory data reset couple of time with no results.
Any ideas?
Edit:
Tried with another 100% working simcard from another provider and get same results.. Pin code -> card removed

Sicross said:
Hi all, I'm having lot of troubles with an Xperia S phone.
Finally get to install the Cyanogen10 rom on it, but when it boot, I unlock it and insert the pin code as usual, after that I get this "error":
- SIM card removed
The mobile network will be unavaiable until you restart with a valid sim card inserted. (in the bottom of it there's a Restart Button)
No network service also when I try to connect manually to my provider network.
Also tried a Factory data reset couple of time with no results.
Any ideas?
Edit:
Tried with another 100% working simcard from another provider and get same results.. Pin code -> card removed
Click to expand...
Click to collapse
if this problem don't happened before is a bug in the rom

I agree. Bug in Rom

Need help: mobile banking trouble shooting

Hi all, I just got it for 3 weeks now. So far I got some finding :
1. Mobile banking never send me sms verification, if I install both Sim card and set them on. It work if I only install one single Sim card in Sim card slot 1.
2. This make me look for double Sim setting, but I only find call default setting option. I don't find sms default setting or data default setting.
3. If I make a call, it always asking me which Sim card should I use. But I have set in the call default setting option for sim card 1.
4. In gaming experience (note: I use swipe as iPhone for navigation), jetpack joyride and zombie smasher cannot exit. Mortal combat (full screen mode) the screen turn all black but I still hear the sound and the app running.
Is there someone can help me, solve this.

51 persons read, but it seem no one have this experience.

If you have the Chinese AL00 version the posted [ROM][AL00] Mate 20 X GlobAL00ized beta [Debloated][Mostly Deodexed] rom will allow you to use Google Pay when you also have root. You'd have to unlock the bootloader, install TWRP (also has been posted), format phone (including internal storage), install rom and install Magisk for root. You need to hide Google Pay from Magisk (also may have to hide Google Services Framework) and mobile payment will work. As for selecting a sim to always make calls and not always ask, I have Settings->Wireless & networks->Dual SIM settings->Default calling SIM set to SIM 1 and my calls use that sim without asking. Then there's Settings->Wireless & networks->Dual SIM settings->Default mobile data with radio buttons to choose between SIM 1 & SIM 2 for mobile data. Hope this helps.

To get gestures working fully ie. Exiting out during full screen, enable the on screen navigation ball that lets you long press to toggle recent apps or short press + left or right to back out of an app. This works great for apps not fully compatible with full screen + gesture mode.

ben63vw said:
If you have the Chinese AL00 version the posted [ROM][AL00] Mate 20 X GlobAL00ized beta [Debloated][Mostly Deodexed] rom will allow you to use Google Pay when you also have root. You'd have to unlock the bootloader, install TWRP (also has been posted), format phone (including internal storage), install rom and install Magisk for root. You need to hide Google Pay from Magisk (also may have to hide Google Services Framework) and mobile payment will work. As for selecting a sim to always make calls and not always ask, I have Settings->Wireless & networks->Dual SIM settings->Default calling SIM set to SIM 1 and my calls use that sim without asking. Then there's Settings->Wireless & networks->Dual SIM settings->Default mobile data with radio buttons to choose between SIM 1 & SIM 2 for mobile data. Hope this helps.
Click to expand...
Click to collapse
Thanks for your response, FYI mine is EVR-L29.
yes I did find the location of "Settings->Wireless & networks->Dual SIM settings->Default calling SIM set to SIM 1 and Settings->Wireless & networks->Dual SIM settings->Default mobile data with radio buttons to choose between SIM 1 & SIM 2 for mobile data" .
But still even I set the default calling is to Sim 1, when I make a call it always ask (chose to use Sim 1 or 2).
The default mobile data is working well.
For comparison in my cat s61 (android 6.0.1), I can find setting for preferred Sim. Options for cellular data, calls, and sms messages (this option I can't find in mate 20x & vital for m banking setting) .
And m banking is working well with this cat s61 even I install 2 Sim cards.

Have you tried factory reset? In some earlier threads (soon after the release of this phone) I vaugely remember ppl stating the first thing to do is a factory reset to fix some issues they were having. And that would be a good time to unlock the bootloader in order to gain root since a factory reset is required to unlock tge bootloader. Just a suggestion if you haven't done it already.

ben63vw said:
Have you tried factory reset? In some earlier threads (soon after the release of this phone) I vaugely remember ppl stating the first thing to do is a factory reset to fix some issues they were having. And that would be a good time to unlock the bootloader in order to gain root since a factory reset is required to unlock tge bootloader. Just a suggestion if you haven't done it already.
Click to expand...
Click to collapse
I haven't try it yet, is it really nessesary? Why must I root the device?

kingshan said:
I haven't try it yet, is it really nessesary? Why must I root the device?
Click to expand...
Click to collapse
You don't have to root, it just allows for more control over your phone and only suggested to do it if you wanted cause a factory reset is required when unlocking the bootloader. At the very least I would performe the factory reset to see if that solves your issue and to get any available updates via Software update app.

Latest report, why mate 20x always asking which Sim to make a call even I set sim1 or 2 for calling? This is becos the third party app I installed error, I don't know why. But after I uninstall it. Mate 20x call a number never asking again.
But still my m banking only working if I plug only one Sim card (registered one) into sim card #1 tray.
SMS verification still can't be received if both sim card plugged in.
Is there anyone can help me solved this??

same problem with me , because i can only use mobile bangking if i choose default mobile data with the sim card that i registered from the bank , so i have to often to switch default mobile data everytime i want to use mobile banking , any suggestion so i can choose default sim card for message because it's seems that the phone are use default mobile data setting for default sim card for sending message.
---------- Post added at 02:31 PM ---------- Previous post was at 02:28 PM ----------
kingshan said:
Latest report, why mate 20x always asking which Sim to make a call even I set sim1 or 2 for calling? This is becos the third party app I installed error, I don't know why. But after I uninstall it. Mate 20x call a number never asking again.
But still my m banking only working if I plug only one Sim card (registered one) into sim card #1 tray.
SMS verification still can't be received if both sim card plugged in.
Is there anyone can help me solved this??
Click to expand...
Click to collapse
you can use 2 sim card but you have to choose default mobile data with the sim card that you registered with m bangking , because the sms verification are sending message based on the sim card that you choose for the default mobile data.