Looking for thin case - EVO 4G Accessories

Does anyone have a recommendation for a thin case or shell? I prefer something clear or with at least a clear back
Sent from my PC36100 using Tapatalk

Check out the cheap TPU cases on ebay. They arent the beefiest, but if all you want is minor protection against bumps and scratches, TPU is the way to go.

Case-mate barely there is a really thin and stylish case. It's probably the thinnest and pretty much fits the phone perfectly. If you're looking for a thin phone case that will protect from "minor" drops, looks sexy and sleek, and doesn't add barely any bulk then it's the way to go.
If you're considering a seidio case, I used to use the thinnest of evo seidio cases but it turned out their quality went way down hill within past years. With their thinnest offering it scratched the top of the evo. Then they made a revision which fit nicely but the part where your volume buttons are was extremely flimsy (mine broke). Not only that but they also used a cheaper rubber material that eventually rubbed off. I understand that they had to save some money from messing up the first time but damn.
So if you're considering a thin case and don't like the case-mate then at least choose something different from the seidio one so you wont be sorely disappointed like myself. I spent like $39.99 on that piece of junk with the belt clip while the case mate was only like $10.

Thanks for the recommendations. I am going to yet the Griffin Reveal since it has a clear back
Sent from my PC36100 using Tapatalk it is

ringke earth
ive tried several cases...all ranges,, ringke earth has so many colors and its wicked thin...

I just got the Griffin reveal case. It fit very well and I can since it is clear I see the white back of the phone!

I also recommend the Ringke Earth cases. I would recommend the casemate barely there, but taking it off has caused scratches along the place where the case ends
Sent from my PC36100 using XDA Premium App

Casemate Barely There hands down!!! It does not offer much if any protections from drops, but it prevents your camera lens from getting scratches from sliding the phone on the table..etc
A lot of people don't even notice that there is a case on my phone.
Agree though that I will leave scratches on the side of you phone. I also had this problem with the ID Case for the iPhone though.

Related

Best case for evo

Trying to decide on a case for an evo. Hopefully getting an evo with my upgrade January first and just trying to do my due diligence. Have an otterbox commuter for my hero and love it.
What case do you have?
Pros and cons?
Screen protector necessary? Never had one on my hero but I know the evo's screen is much bigger.
Thanks in advance for your replies!
Aosp froyo, It's the poop!
Seidio rugged
I have the seidio rugged case for my evo. Its only about 40 bucks off ebay. I like it better then both the otterbox and ther ballistic. It looks better...has more protection and if for any reason you ever have to take it off its alot easier to remove then the other cases.
bmoreboy02 said:
I have the seidio rugged case for my evo. Its only about 40 bucks off ebay. I like it better then both the otterbox and ther ballistic. It looks better...has more protection and if for any reason you ever have to take it off its alot easier to remove then the other cases.
Click to expand...
Click to collapse
I have 2 Seidio Rugged cases and they both fell apart with mild use. The tabs on the end snapped off and the covers are peeling. The thin rubber also tore off with time.
I have 2 Trident Cyclops cases now, they feel like they are built much better. It seems slightly sleeker but I think it offers at least as much protection.
For heavy duty use, go Ballistic.
firemedic1343 said:
I have 2 Seidio Rugged cases and they both fell apart with mild use. The tabs on the end snapped off and the covers are peeling. The thin rubber also tore off with time.
I have 2 Trident Cyclops cases now, they feel like they are built much better. It seems slightly sleeker but I think it offers at least as much protection.
For heavy duty use, go Ballistic.
Click to expand...
Click to collapse
i agree with this.
go with trident or ballistic.
personally i love my trident cyclops.
With the Trident do you not have the rainbow issue on screen from screen protector?
Also heard that pictures from the camera have a blue tint with the Cyclops on.
Aosp froyo, It's the poop!
the ballistic has more protection than any case out right now. the design of the ballistic is delightful. it is EXTREME protection. it has a built in screen protector and an additional screen protector thats optional. you can drop the phone from the ceiling to your floor and it will save the phone.. i have a mint grey ballistic case im selling for $30 bux shipped in the classifieds. smoke it over and look at the photos to check it out.
without the silicon jacket the ballistic case is close in size to the otterbox defender. you can use the included holster with or without the silicon jacket if you dont need the full protection. all ports are covered with the silicon jacket on (rubber flaps over the jack and bottom ports) the camera, LED lamps and speaker on back are all protected. the
IMO the Ballistic case is a much superior product. second to that would be the otterbox....
Thats weird. I work construction and trust me ive pushed this case to the limit and its held up everytime. Ive had it since june and it still fits just as snug as day1. As far as the ballistic my co-worker had a ballistic on his htc incredible and his cracked while in his pocket simply by stepping up a latter. The preesure of his jeans pushing down was enough to crack it. I dropped my seidio down a elevator shaft and simply scuffed my belt holdster
Sent from my PC36100 using XDA App
stricklerjosh said:
With the Trident do you not have the rainbow issue on screen from screen protector?
Also heard that pictures from the camera have a blue tint with the Cyclops on.
Aosp froyo, It's the poop!
Click to expand...
Click to collapse
yeah, sometimes i get a rainbow effect in certain areas, even with the premium protector. i don't really notice it when the screen is on though.
the blue tint is from the piece of plastic they put inside to cover the camera and led's. i just popped it out.
I think it really depends on what you're going to be doing with your phone, where you're going to be most of the time, and how likely you are to drop it.
To say that any one case is the "best" case for the evo (and any phone/thing you put a case on lol) would be wrong, imo.
Say you're looking for looks -- you'd go for something like a barely there from casemate
Say you're looking for full on rugged protection -- you'd go for something like the ballistic
For reference, I've heard not great things about build quality of the Defender from Otterbox, and Seidio cases. *anecdotal, so take it as you will*
As I said in another thread, I have the Impact series case from Otterbox.
Fits my needs, so it's the "best" case for me.
bmoreboy02 said:
Thats weird. I work construction and trust me ive pushed this case to the limit and its held up everytime. Ive had it since june and it still fits just as snug as day1. As far as the ballistic my co-worker had a ballistic on his htc incredible and his cracked while in his pocket simply by stepping up a latter. The preesure of his jeans pushing down was enough to crack it. I dropped my seidio down a elevator shaft and simply scuffed my belt holdster
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Unless I'm missing something, they don't make any Ballistic cases for the Incredible...
Ballistic does not make cases for the Incredible. The only HTC phone they have a case available for is the HTC EVO. www.goballisticcase.com
I'm currently using an Otterbox Defender for mine and its holding well. I'm interested in a Ballistic HC because since they introduced it the case looks like a step up from the Defender. I've seen videos and read the personal reviews of people who have had both and the HC is "better" according to most. It all depends on where your phone will be and what you'll be doing with it. I don't really care much about the size. I want a case that is going to protect my $500 investment.
If you want the best protection for your EVO I'd say Ballistic HC or Otterbox Defender. Each is $50 or you can check out the Trident Cyclops which is only $34.95.
if you dont mind the size, the Ballistic blows away the otterbox and the Trident for protection.....
I prefer the Fishbone case...I paid $12 bucks for it and so far it is great for me.
Marlowr05 said:
I prefer the Fishbone case...I paid $12 bucks for it and so far it is great for me.
Click to expand...
Click to collapse
Where did you get that case?
EDIT: Nevermind, I found some on amazon.
bromat80 said:
Where did you get that case?
EDIT: Nevermind, I found some on amazon.
Click to expand...
Click to collapse
I found mine at my local mall or used cell phone store. Also search on amazon and you will fin some. Hope this helps.
Sent from my PC36100 using XDA App
Anyone tried the Case Mate tough case? I'm not seeing many reviews for it, but it looks nice... plus there are a few on eBay for 25bucks.
Sent from my PC36100 using XDA App
MILH0U5E said:
Anyone tried the Case Mate tough case? I'm not seeing many reviews for it, but it looks nice... plus there are a few on eBay for 25bucks.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
I had the tough case for my Samsung Vibrant and I loved it.
I like the platinum gun metal case I got when I got the phone.
It's lightweight and thin. There is felt on the back inside so it doesn't scuff up your phone. The corners of the front also help to keep my invisible shield in place in case it decided to wander around in the heat.
best case for me
I got a Seidio Innocase for X-mas to replace the one I got with the phone. That, plus an Invisishield is all the protection I need and it suits me. I wanted to try the Impact Series Otterbox, so I ordered one. They sent me a Defender Series and when I called them up they just sent me the right one, no questions asked. I have them both still, but don't use them. The Defender is, well, I just don't drive a tank or work in a war zone, so I don't really need it (and yes, the kick stand on that case is an absolute joke...). The Impact Series Otterbox just sticks in my pocket too much and I can't get it out as easily, but it looks adequate I suppose. The Innocase is great for me, doesn't stick in my pocket, has felt on the back so it doesn't scratch or scuff my device and isn't too bulky. That's why Santa got me another one.
P.S. I think the snap in the back slide-in broke b/c I was pulling it apart quite often to do battery pulls (cause not all ROMs are stable...) and didn't just leave it out of the case like I should have... Only time I've taken the new one off was tonight to put my new Seidio extended 1750 mAh Innocell battery Santa brought in before bedtime to charge over night (ok, maybe one other time...)
Not Swyped from anywhere cause my battery is being conditioned (duh!)
I have the Innocase active in blue.It came down to what I really wanted the case to do for me or rather my phone as well.
I wanted protection first and for most,then comfort in my hand and then looks.
It is a little bulky but that bulk is my protection from waste high drops.My 3 year old nephew has tested it out for me by throwing it on the hard wood floor standing on the kitchen chair...lol
It feels really good to the touch and unless your hands are on the smaller side,you will enjoy the fit.I wear a large glove so it fits me good.
It looks great.The fit and finish are very good.It will take getting use to.A little harder push to operate the power button but a fingernail tip makes it easier.
Now for the wearing it issue...It,while in the case on your side will be odd at first.I am a bigger guy,5`11 228 but my waste is 36.I notice it a lot more than say a smaller framed 150 pounder would but,it does stay put on my belt.I just rotate the top of the phone 90 degrees facing the front of my body and it rides that way with no issues at all.
Worth the money in my opinion.

[Q] Do I get Ballistic HC or the Otterbox Defender?

I'm having a hard time deciding which case to get. I used to have a Seidio Innocase, but the rubber outside became too loose and stretchy for my liking.
Has anyone had both? What are your feelings on them? My main concerns are:
- sturdiness - will the case start falling apart/become loose like the Seidio one?
- size - i understand a little bulk comes with protection, but which one is the smaller case of the two? I want to be able to shove it in my pocket without too much work.
Anybody have a comparison on the two? I tried searching around, but couldn't find any comparisons of them.
I bought the Defender. Put it on my phone and took it off after 10 seconds. sold it on eBay. I've had the Otterbox Commuter which I loved, but yesterday I got the Trident Cyclops and it is awesome! The problem with the defender for me is the entire outside is silicone, i hate that. It doesnt seem like it would stay on the phone very well either. I'm considering purchasing the Ballistic as well just for fun, but the Trident Cyclops has very good protection. I can see it taking a very large drop no problem. I also just found out that they sell 10 different skins for the Cyclops, so you can dress it up all sorts of ways.
edit: post number 420 for me! woohooo
edit 2: oh dang, they also sell a holster for the Cyclops? man this case keeps getting better and better!
ballistic all the way
If you want maximum protection, then the Ballistic is the only way to go. Only thing is the Ballistic also adds the most bulk of any case out there. It's definitely NOT pocket friendly, especially with the outer silicone layer on it. Without the outer silicone layer, it's about the same as the other rugged cases.
When I first got my evo at radio shack the employee had the otterbox and I didn't like the feel or looks so I tried the ballisitic case and I have been happy with it.
I just got the Cyclops from Trident Got to say not complaints here
Trident Cyclops. I got the limited edition green (i doubt it's actually limited edition, but it matches my theme).
It's sturdy, it feels good, it adds a little more bulk than otterbox but less than defender and it protects well. Good stuff, plus they changed the packaging to where the PET protector the camera and LED lights are optional so no blue glow when you take pictures with flash.
100% I haven't taken it off since I got it except for battery pulls. I highly recommend it. Look up a review on youtube.
Holster
Can anyone tell me if the Ballistic HC will fit the Holster without the optional outer silicone cover. I ask because in the video on their web site they put it in the holster with the silicone cover on.
Otterbox shouldn't even be an option.
There are extremes only. Otterbox and Seidio are extremely bad in my experience. Ballistic and Trident are awesome.
to be honest the otterbox commuter series has been my favorite case i have ever had. it is pocket friendly because it has the hard plastic on the outside and silicone on the inside. I have had my otterbox for awhile and I love it. I have a lifted F-150 and have dropped my evo getting out of my truck several times. this is essentially dropping from about 5 and a half feet and my case has yet to be damaged let alone my phone. these drops have destroyed screens on other phones but it has been safe in my otterbox. the next biggest plus for me is that i never have any issues with getting the phone in and out of my pocket.
Echo2Lincoln said:
Can anyone tell me if the Ballistic HC will fit the Holster without the optional outer silicone cover. I ask because in the video on their web site they put it in the holster with the silicone cover on.
Click to expand...
Click to collapse
Yes, the holster is made to work with or without the outer silicone layer.
{SBR}_L3GION said:
I have a lifted F-150
Click to expand...
Click to collapse
Nice, I also have a lifted F-150.
Sent from my HTC EVO 4G with Tapatalk
Instead of just saying one box is better or worse, could reasons for such comments be given. Would help.
Sent from my PC36100 using XDA App
i have the defender and its craptastic
holster is HUGE !
kickstand blows ass breaks was to easy
the ballisitic stand isn't much better
Echo2Lincoln said:
Instead of just saying one box is better or worse, could reasons for such comments be given. Would help.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Ballistic
Awesome build quality
Kickstand snaps off but can be put back on(so far)
Outer layer is removable for varying degrees of protection
Beautiful
Tougher and pricier feeling materials
Otterbox
Feels very flimsy overall
Kickstand breaks off
Ugly
Materials don't feel as good as they do with the Otterbox for iPhone
I think I remember on their facebook page...Otterbox admitted that they used a completely different factory for the Evo...but that doesn't explain the poor design...just explains the huge downgrade in feel...possibly different(cheaper)plastics.
I ordered the ballistic case yesterday and I recommend u do the same
Sent from my PC36100 using XDA App
I have a black ballistic hc with rubber and holster never used because it's gigantic. Sticking with my commuter
Sent from my PC36100 using XDA App
Hmm...I'm kinda liking the Trident Cyclops, now. Man, I've got some more reading to do. I wonder if I can order the cases, try 'em out, and send back the ones i dont like...
sqeet said:
Hmm...I'm kinda liking the Trident Cyclops, now. Man, I've got some more reading to do. I wonder if I can order the cases, try 'em out, and send back the ones i dont like...
Click to expand...
Click to collapse
I feel your pain....i am in the same delima. I think either the otter or ballistic. I have a friend who has the otterbox defender, i like it. The outer shell seems a little cheesy when you take it on and off, but actually feels ok once you get it on and get the front part of the silicone shell into the front groves of the hard case. Wish I had a friend with ballistic. The only issue I see right now with the ballistic is the size and the holster, I can't find pics of it in the holster without the outer silicone shell on. I can't see who now but someone (i gave thanks) did reply and say the ballistic would work in the holster without silicone shell.
The trident hasn't got my interest yet, I continue to read......................
Yes it does fit in the holster without the outer silicone layer (I have one) The Ballistic Case is AMAZING!

My Case Collection

So I'm that type of person who has a case for every day of the week. Lol
I have here in order from left to right on the picture
Case logic pouch (For Android/Windows Phones is what it said on the packaging)
Otterbox Defender
Otterbox Commuter
Generic Black TPU Case from ebay
Generic blue hard snap on case.
The leather pouch is awesome! It fits the phone naked or with any of my cases with the exception of the otterbox defender. I had a Seidio spring loaded holster for use with the Captivate+Innocase and it had a very snug fit for the Atrix+any of the other cases aside from the Defender.
The defender is actually really nice on this phone! I had it on the Captivate and it was wayyy to bulky and it made it extremely frustrating whenever you tried to touch the capacitive buttons on the bottom. With the Atrix, it doesn't add too much bulk and I can feel safe whenever I have it on my phone. I usually use this one when I know I'm going somewhere where they'll be potential damage to my phone like the beach.
The commuter is my personal favorite case! It looks real nice with the fancy design on the back. It doesn't add too much bulk, but does add a good ammount of protection. I find it strange that all the Captivate otterbox cases make the phone twice as big, but that's not the same case for the Atrix. It's even stranger that a naked Atrix is bulkier than a naked Captivate.
The generic black TPU is also pretty nice. It doesn't add much bulk at all, but TPU usually offers good protection. Mine specifically has that stupid common Argyle pattern, but it's in the inside so it's not shown on the back of my phone! The only problem I have with this case is the fact that it attracts fingerprints like no tomorrow.
The generic blue snap on case was an impulse buy when I got my phone. I just wanted to make sure it was protected out of the box. I don't really like this case too much as I'm not a big fan of hard cases to begin with.
I'm still waiting on the Candyshell, and other cases to come out. I'll update asap!
If anyone has any detailed questions about any of the cases, let me know!!!
F_L_Abs said:
So I'm that type of person who has a case for every day of the week. Lol
I have here in order from left to right on the picture
Case logic pouch (For Android/Windows Phones is what it said on the packaging)
Otterbox Defender
Otterbox Commuter
Generic Black TPU Case from ebay
Generic blue hard snap on case.
The leather pouch is awesome! It fits the phone naked or with any of my cases with the exception of the otterbox defender. I had a Seidio spring loaded holster for use with the Captivate+Innocase and it had a very snug fit for the Atrix+any of the other cases aside from the Defender.
The defender is actually really nice on this phone! I had it on the Captivate and it was wayyy to bulky and it made it extremely frustrating whenever you tried to touch the capacitive buttons on the bottom. With the Atrix, it doesn't add too much bulk and I can feel safe whenever I have it on my phone. I usually use this one when I know I'm going somewhere where they'll be potential damage to my phone like the beach.
The commuter is my personal favorite case! It looks real nice with the fancy design on the back. It doesn't add too much bulk, but does add a good ammount of protection. I find it strange that all the Captivate otterbox cases make the phone twice as big, but that's not the same case for the Atrix. It's even stranger that a naked Atrix is bulkier than a naked Captivate.
The generic black TPU is also pretty nice. It doesn't add much bulk at all, but TPU usually offers good protection. Mine specifically has that stupid common Argyle pattern, but it's in the inside so it's not shown on the back of my phone! The only problem I have with this case is the fact that it attracts fingerprints like no tomorrow.
The generic blue snap on case was an impulse buy when I got my phone. I just wanted to make sure it was protected out of the box. I don't really like this case too much as I'm not a big fan of hard cases to begin with.
I'm still waiting on the Candyshell, and other cases to come out. I'll update asap!
If anyone has any detailed questions about any of the cases, let me know!!!
Click to expand...
Click to collapse
I dont feel like a loner anymore lol! I've always been obsessed with cases. I have the OBD, OBC, Feather, Bodyglove and the Candyshell. Caint wait for Sedio to release a Active X or Rugged. I'm also hoping for some case-mates soon? Request? http://support.case-mate.com/index.php?pg=request
I'm waiting on the seidio active x with holster! I loved the seidio holster I had for my captivate! It works pretty well still with certain atrix cases, but I ended up giving it away. Lol
Not the biggest case mate fan but ill submit a request and well see ;Db
Sent from my MB860 using XDA Premium App
You are not alone I couldn't decide btwn the defender or commuter so I got both to test out in person. I ended up liking.g the commuter mainly BC I had trouble plugging in some headphone jack devices because the defender is slightly bulkier
Sent from my MB860 using XDA App
I just ordered the black tpu with the argyle pattern on the inside off Amazon. I have a question for you, the buttons for volume look molded in, how hard is it to push the buttons with the case on?
How much bulk does the commuter add? I'm thinking of picking it up but I don't want it to be fat
Sent from my MB860 using XDA App
I didn't find it harder to press at all with the tpu case. Then again that might just be me not paying full attention to it. I'm not very picky... lol
The commuter does add a bit of bulk, but I don't think its bad at all especially for the ammount of protection it adds. I do also really dig the design on the back! I heard that it won't fit with any docks though to give you an idea. I was able to dock my phone with the TPU case though.
Sent from my Desire HD using XDA Premium App
bigc_13 said:
How much bulk does the commuter add? I'm thinking of picking it up but I don't want it to be fat
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
That was my biggest concern because I didnt really want a case but didn't want a broken phone. So I got the commuter and love that it doesn't make it that much bigger but makes it feel a ton safer.
Sent from my MB860 using XDA App
I just got the TPU case... dropped it from my lap getting out of the car in a parking garage.. unscathed. great case.. doesnt look as fancy as others but it does the job and its a pretty good price.
yeah, i bought a few of those snap on hard cases just for the sake of protection, however, they are a ***** to get off! And i use my vehicle dock often, so thats a no go. I bought a clear skin (like a zaag), and havent looked back since. It actually makes the back of the phone shinny and the CF weave pattern really POP...looks more like real CF
After checked a cpl of cases for my new Atrix, I found one in HK and its dirt cheap too ($6!!). Dual material PC + TPU with transparent back, flame, scratch resistant, very light and thin, washable too. The fact I disliked about otterbox and similar heavy armed cases (aside of being very bulky) is a lack of heat dissipation.
My suggestion goes for Momax iCasePro:
http://www.momax.net/en/Product_Show.aspx?ID=1415&T=1
Top notch.
F_L_Abs said:
So I'm that type of person who has a case for every day of the week. Lol
I have here in order from left to right on the picture
Case logic pouch (For Android/Windows Phones is what it said on the packaging)
Otterbox Defender
Otterbox Commuter
Generic Black TPU Case from ebay
Generic blue hard snap on case.
The leather pouch is awesome! It fits the phone naked or with any of my cases with the exception of the otterbox defender. I had a Seidio spring loaded holster for use with the Captivate+Innocase and it had a very snug fit for the Atrix+any of the other cases aside from the Defender.
The defender is actually really nice on this phone! I had it on the Captivate and it was wayyy to bulky and it made it extremely frustrating whenever you tried to touch the capacitive buttons on the bottom. With the Atrix, it doesn't add too much bulk and I can feel safe whenever I have it on my phone. I usually use this one when I know I'm going somewhere where they'll be potential damage to my phone like the beach.
The commuter is my personal favorite case! It looks real nice with the fancy design on the back. It doesn't add too much bulk, but does add a good ammount of protection. I find it strange that all the Captivate otterbox cases make the phone twice as big, but that's not the same case for the Atrix. It's even stranger that a naked Atrix is bulkier than a naked Captivate.
The generic black TPU is also pretty nice. It doesn't add much bulk at all, but TPU usually offers good protection. Mine specifically has that stupid common Argyle pattern, but it's in the inside so it's not shown on the back of my phone! The only problem I have with this case is the fact that it attracts fingerprints like no tomorrow.
The generic blue snap on case was an impulse buy when I got my phone. I just wanted to make sure it was protected out of the box. I don't really like this case too much as I'm not a big fan of hard cases to begin with.
I'm still waiting on the Candyshell, and other cases to come out. I'll update asap!
If anyone has any detailed questions about any of the cases, let me know!!!
Click to expand...
Click to collapse
Do they have those leather cases but sideways????? I'm looking for one that will fit those tpu cases as well.
Yes they do! I bought it at a local supermarket kinda store, but I did see it at Wally World too.
The description specifically sais "for Windows and Android Phones"
Sent from my MB860 using XDA Premium App
Helpful post, I got the commuter, it's pretty good
never really saw the need for a case it makes a good phone look ugly and doesnt really protect i prefer invisible shields
Until it slips out of your hands and hits the ground and ends up looking worse than with a case..... I like the look of the commuter otter box case
Sent from my MB860 using XDA Premium App
Question for anyone that does not mind answering. I currently have the otterbox defender which I have to say I enjoy having it while I am out running around etc. Like that feeling of safety with the "hefty" case since I have large hands does not bother me to much. BUT, I was thinking of getting another case to use just around the house and thinking about the feather case or something small and minimal. I tend to set my phone face down most of the time. Any suggestions? also to expound upon that if anyone else has tried or done this before if I did that i would look into getting a adhesive screen protector. If I did that would it work with the otterbox defender and its built in screen protector would I maybe have to cut that out? Which I am not totally opposed to just seems almost like a waste. I know gorilla glass is tough stuff I am just the meticulous kind of person that if i saw the scratch on my screen I would not be able to let it go and it would drive me crazy.
Ryan,
I would suggest either the otterbox commuter (still kinda bulky, but not as bad as the defender), or the body glove mirage (nice and thin).
As far as the screen protector, I've used the matte/anti glare from att with the defender. I do kinda notice its not as responsive when I'm typing and etc, but thar might just be a mental thing.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

Best Protector Case for a captivate

Hi, i was wondering about which case buy and want to see your opinions about the best case for the cappy.
I've been watching the Trident Clyclops: http://www.cyclopscase.com/products/Trident-Cyclops-Protective-Case-for-Samsung-Captivate--Red.html
And also the otterbox http://www.otterbox.com/samsung-captivate-cases/samsung-captivate-cases,default,sc.html.
Seidio http://www.seidioonline.com/product-p/csk3sscap-rd.htm?
Body Glove http://www.bodyglovemobile.com/produ...and,219,19.htm
Otterbox Defender is amaxing
Sent from my Darky's ROM 10.2 EE Captivate using XDA App
I had issues getting to the four buttons with the Otterbox Defender. Nevertheless, in terms of protection, I trust them wholeheartedly.
Anyone has tested the Trident?
In addition to otterbox and cyclops look at the seidio active x.
this one http://www.seidioonline.com/product-p/csk3sscap-rd.htm? i like the desing
I just had my second Otterbox holster break. They replaced the first one without batting an eye. I haven't had a chance to call about #2, but frankly I'm not sure if I want to risk it. Fortunately the phone fell out while I was driving my car, not my motorcycle, but I'm not sure I want to risk it again.
So far it's the only case I've tried.
I hate to buck the trend, but I really like the cheap TPU eBay cases. I know, I know, some of us think you need to spend a lot to pamper your Cappy, but I do have my reasons.
They are cheap. I'm big on spending less than $5 for things.
TPU is a great blend of rigidity and pliability. I think silicone is a touch too soft to disperse impact energy, and hard plastic transmits the energy to the phone and often breaks in the process.
They are slick, but easy to hold. I carry my phone in my pocket. I think holsters look kinda dumb. TPU is generally very smooth and slides in and out of a pocket very nicely.
They are thin. Many of the hard molded cases turn your sexy-thin Captivate into a non-sexy blob, cool molded patterns notwithstanding. Lots of the silicone cases have kind of a shapeless look that I don't like.
I've been using a plain black TPU case for a while now, and I get lots of comments on how thin my phone is. I've also dropped it several times with no ill effect, except a less shiny spot on one corner of the cover. No complaints, and I really have a hard time imagining how the expensive ones are better.
TPU is nice and much, much better than silicone. I wish otter/seidio/trident would use TPU. I have a thin TPU case (body glove) and like it alot. Its just sometimes I want the thicker, two layered plastic and rubber case which is why I also have the seidio active.
The first case I bought was the pdair aluminum which would be a nice case but it kills the cellular signal so I can't recommend anyone buy it. Wifi works fine so if I ever travel somewhere I won't have service I plan on using it.
I like my Bodyglove case just fine. I've used it since the launch of the cappy and couldn't be happier. It's more rigid than silicone and less bulky than the otterbox. I've dropped my cappy numerous times on pavement, and as long as a jutting edge doesn't hit the screen it won't break. There is a slight lip on the front of the body glove that makes it so the screen doesn't hit when dropped on a flat surface.
asrrin29 said:
I like my Bodyglove case just fine. I've used it since the launch of the cappy and couldn't be happier. It's more rigid than silicone and less bulky than the otterbox. I've dropped my cappy numerous times on pavement, and as long as a jutting edge doesn't hit the screen it won't break. There is a slight lip on the front of the body glove that makes it so the screen doesn't hit when dropped on a flat surface.
Click to expand...
Click to collapse
This right? http://www.bodyglovemobile.com/prod...-glove-snap-on-case-with-clipstand,219,19.htm
Is like the otterbox impact, i guess.
I just bought today the body glove, found a great offer in ebay. I will post my opinion after test it.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
I have the Otterbox Defender and I love it
I have an Otterbox Defender for my Captivate, but my Galaxy S 2 is naked. Need to find one for it.
I love my body glove, the phone is slim and easy to handle. I never droped yet but it feels really solid.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
I have a generic silicone protector on my cappy, and fits so good on it, looks so pro.
NightHawk877 said:
I have an Otterbox Defender for my Captivate, but my Galaxy S 2 is naked. Need to find one for it.
Click to expand...
Click to collapse
Last I checked, Otterbox only has the Commuter for the S2, ATM.
Body Glove
I have bought like 5 cases for my cappy, the Otterbox, Body Glove, a slim hard plastic snap on case and a full hard snap on case.
In the end my 2 favorites are the Body Glove and the Slim snap on that snaps only on the back.
The otterbox case is nice, it is just too bulky. I use the Body Glove daily because it protects from impact, is not bulky and slides in and out of the pocket easy.
Moving forward I am all about the TPU cases.
I use this case http://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HK3SSCAP-BK
Look on ebay, I've seen these for $35. Dropped the phone twice and there's no damage on the phone at all.
I use the otterbox commuter with an invisible shield screen protector. I work with concrete and often get my phone cpvered with dust and grime. The case gets really dirty but when I remove it the phone is still perfect. I would take this case over the bulky defender version.
Sent from my SGH-I897 using XDA Premium App

Disappointed with my SGP Spigen Neo Hybrid Case

So after seeing pictures of it for a while and finally seeing peoples reviews for the case i finally bought the infinity white case. I already had a couple of ebay cases while i was waiting to get something a little more "premium" so i pulled the trigger on the Neo Hybrid. I received it today and have to say it is not what i expected.I already knew about the buttons being too sensitive and the case being more purple than blue so no surprises there, but being advertised as a tpu case i thought this would fit the phone much more tightly the way every tpu case ive ever bought off of ebay for $2 has felt. the tpu portion of the case was either made too large or from a different kind of material because it feels loose on the phone to me. the bumper that goes around the case is meant to keep the tpu tight to the phone, and perhaps add another layer of protection but it tpu along the front of the screen feels very loose and is even a bit sharp to the touch because of its square shape. this is the case i had been using for the past month and i loved the feel, but not so much the look of it. I actually couldnt decide which color i wanted and bought the orange one as well a couple of days ago and it looks like ill be sending them both back in favor of my $4 ebay case.
http://www.ebay.com/itm/Black-PC-TP...670415?pt=PDA_Accessories&hash=item1e6f7fe08f
Just a quick question, did you get the Neo Hybrid Lumi or the Color?
it was the color series with the purple/blue case and white bumper frame, now i have an orange lumi on order and i can only assume it is going to have the same feel to it. way more bummed about how loose the case feels and the way the rim around the screen is really jagged feeling and not rounded at all.
I've got an orange Lumi coming in today, I'll post anything if it disappoints. They looks so damn good in the pictures, especially with the white GS3. I just had to pull the trigger
King Shady said:
I've got an orange Lumi coming in today, I'll post anything if it disappoints. They looks so damn good in the pictures, especially with the white GS3. I just had to pull the trigger
Click to expand...
Click to collapse
the case looks nice but be ready not to use it or modify it so the buttons work. I already emailed them and sent pics in. The little bumpers are way to high so it causes the sensitivity to go through the roof
I don't have one yet but I am very disappointed in the colour selection. How can you not have a black/black like all the others before it? The old ones never sagged on me so I personally want a black/black with the good old silicon and polycarbonate frame.
Don't see it happening though.
SGP products suck in terms of "fit", I had an ultra thin air for my SII, the worst case ever, since then I decided not to purchase sgp again.
Case Mate for the win!!! Very recommended!!! Great quality and fit!!!
Sent from my GT-I9300 using XDA Premium HD app
misha25 said:
the case looks nice but be ready not to use it or modify it so the buttons work. I already emailed them and sent pics in. The little bumpers are way to high so it causes the sensitivity to go through the roof
Click to expand...
Click to collapse
I emailed them about the button issue too. They seem to know about it and said I'm getting an updated version of the Color in mid-August.
lsv-1 said:
SGP products suck in terms of "fit", I had an ultra thin air for my SII, the worst case ever, since then I decided not to purchase sgp again.
Case Mate for the win!!! Very recommended!!! Great quality and fit!!!
Sent from my GT-I9300 using XDA Premium HD app
Click to expand...
Click to collapse
I ordered their leather pouch because I seriously loved their screen protectors. The pouch was so tight I had to use a razor blade to cut the seams to remove my phone. The pull tab broke off as I was trying to remove my phone with it.
i think theres something to be said for mass producing cases. all the generic ebay tpu cases seem to fit perfect, havent had an issue yet. they all fit nice and snug, cutouts are perfect, the buttons arent as tactile and clicky as more expensive cases but theyre still easy to press
I agree with the OP, I got the neo hybrid lumi in green and I think that this case just feels cheaply made, this is definitely not worth paying $26. My cheap tpu case I got off eBay for 3 bucks is 100 times better than this. The camera cut off holes for this aren't even properly aligned and the case does not fit the phone very well. And also with the issue with the buttons. I highly suggest that no one should buy this case. It's a terrible case and cheaply made and over priced. I'm disappointed with the way this case turned out. I put a bad review on SGPs website to warn other buyers but they would not even post my review. Screw you SGP lol
Sent from my SGH-T999 using xda app-developers app
Was waiting for a review like this... really unsure if to order it.
How bulky is it in comparison to the Incipio Sillicrylic? I can't decide between the two.
Yonatanl2 said:
Was waiting for a review like this... really unsure if to order it.
How bulky is it in comparison to the Incipio Sillicrylic? I can't decide between the two.
Click to expand...
Click to collapse
I highly suggest you go with the incipio case. The Sgp case is not worth it.
Sent from my SGH-T999 using xda app-developers app
Hey Angie have you had any other cases for your gs3? If you notice while the case is on the phone the bit that runs around the edge of the screen can be moved very easily. The band is what makes the case stick to the phone and difficult to take off. My dislike is with the actual tpu case. Which is much more flimsy and soft than most tpu cases
no the band is the only thing that fits the phone well, im referring to the bit on tpu that sticks out past the band around the edge of the front glass, if you nudge it at all its very lose and also is very angular and uncomfortable to touch
angie4u said:
that is so weird because i have no issues with the cameras and holes not aligning with the cutouts, as you can see from the pictures. And the fit is very snug. This is my first SGP case purchase so did I just get lucky? I haven't use the Incipio so I cant compare the two but in terms of bulkiness, I don't find this to be bulky at all. it's very thin and sleek. However, if you are looking for something that's very durable, this might not be the case for you.
Click to expand...
Click to collapse
Yeah I think you did get lucky, because the cut out on mine was not even centered like how it is with yours. The holes on mine came down more to where the camera, lights and speakers are. And in the front, the top part of the tpu covered the silver bezel but hardly covered the bottom part. Close enough to where it looks like the tpu was sagging. I was so pissed that I literally wanted to cover the case in gasoline and burn it for how ****ty, it was lol. I honestly think that the feel of the case just feels so cheap. I have a few other tpu cases I purchased on eBay at a much cheaper price that felt more of a high quality than that piece of crap that sgp made lol. But alas, I returned it back to sgp with an e-mail stating that they did a piss poor job with the case lol.
Sent from my SGH-T999 using xda app-developers app
I guess I'm another of the lucky ones. My cutouts fit perfect, and I have no issues (besides the whole oversensitive buttons issue) but I can relate to the whole "looseness" thing.
As far as TPU cases go, the NeoHyb is definitely not cut to be "tight-fitting" like the some of the other TPU cases I've seen. Without the band, the TPU base IS loose fitting.
With the plastic band though, the entire assembly is tight enough that any attempts to pull it off usually takes the battery cover along with it.
Also, the TPU is more pliable and softer then most other TPU cases I've seen, which makes the "loose" feeling even worse, but I take it it's made that way for better impact absorption.
It's definitely not soft and stretchy like silicone though, which I hate.
So, is the NeoHybrid a perfect case? No. The plastic band is too thin, too slippery. The TPU back is not rough enough. The buttons don't really work without modifications. The TPU rim around the screen, as the OP said, feels "sharp" enough out of the box to be slightly uncomfortable.
Yet, for some God forsaken reason, I like the bloody bugger and I think 20 odd dollars is a fair price for it - considering I've dropped the phone a couple of times already and the case has been doing what it's paid for with aplomb.
YMMV though.
I DO have the Incipio Faxion - another TPU/Polycarb hybrid case I've seen out there - on order though, and plan to do a comparo as soon as it arrives.
Considering I got both at around the same price, it should be an interesting comparison.
I think people are being unreasonable here. This case isn't supposed to be as hard as other TPU cases. That is why there is a polycarbonate hard frame. The whole design philosophy of the Neohybrid is super soft inside with hard shell structural support. I am glad they went for the silicon feel.
The capdase soft jacket feels basically like silicon for anyone going for that type of case. The modello is quite hard by the way. Almost as rigid as a hard snap on shell.
Tomatoes8 said:
I think people are being unreasonable here. This case isn't supposed to be as hard as other TPU cases. That is why there is a polycarbonate hard frame. The whole design philosophy of the Neohybrid is super soft inside with hard shell structural support. I am glad they went for the silicon feel.
The capdase soft jacket feels basically like silicon for anyone going for that type of case. The modello is quite hard by the way. Almost as rigid as a hard snap on shell.
Click to expand...
Click to collapse
Doesn't feel super soft to me.
Sent from my SGH-T999 using xda app-developers app
angie4u said:
did you check if the reseller was selling genuine SGP product? because i almost got a GLAS.t screen protector from a site that was selling it like.. $8 cheaper than SGP but I wasn't sure so I emailed them.. they told me they were fake. maybe it was poorer quality because it was imitation.. but it boggles my mind why anyone would want to imitate $30 items...
Click to expand...
Click to collapse
I ordered it straight from SGP when they were doing the pre orders. So I'm pretty sure it's genuine unless they're lying and are just making some fake products. They gave me my money back though so it's all good. I'm pretty sure those cheap imitations probably turned out better than their genuine product lol.
Sent from my SGH-T999 using xda app-developers app

Categories

Resources