Related
This guide on how to use the OC/UV beater app that is used to control my overclock daemon that is included in some roms, and is flashable here for advanced users : http://forum.xda-developers.com/showpost.php?p=21253167&postcount=38 . If you cant find the app, unfortunately its not available in market but installable here: http://forum.xda-developers.com/showthread.php?t=1207546
First of all you need to make sure that any apps like setCpu or other overclocking apps are uninstalled not just disabled. Once this is done you need to reboot for it to take effect.
In the app you will normally have 3 tabs, these can be used to create different profiles. You can set a profile name if you like or just leave them.
You then have 6 dropdown menus for the overclock settings, 3 for each phone state. Your phone has 2 states, awake and asleep, asleep is when the phone is screen off and nothing too cpu consuming is running in the background and awake is for any other time. When you open the app for the first time the will say !set this is normal.
For each state you have a governor, min and max setting. When choosing a governor dont choose smartass as this does not work properly with the daemon (see below for why). Personally i use the normal on demand for awake and conservative for a asleep. Other governors can be used though depending on your preference.
Next you set your frequencies. Normally for minimum its safe to choose the lowest value unless you are having issues. As for the awake maximum choose what ever is the highest your phone runs stable at, or if you dont know, try out the one above your current speed. For asleep maximum either choose the minimum again or the one above (message to all kernel devs- try and enable a speed around 120mhz for maximum battery life).
Now we want to test these speeds out to see if they work, hit save, then temp activate. Now use your phone for a while, preferably trying a few intensive apps. When you are sure its stable use perm activate to set it on boot.
This should be enough for most people, but the app has a couple more features like profile switching based on battery state and ill leave you to work them out if you want as they are fairly self explanatory.
About the smartass governor: this governor was designed to switch maximum speeds based on phone state like screen on and off however the daemon does this for you if you set it correctly and will conflict with each other.
For some reason, I can't set anything except the govs (and they both show the same possibilities - there is no "conservative" for sleep) the rest just says !set and it's the only possibility there is.
Is it the app or is my problem ROM-specific?
Using TurboFire beta 6 ROM
barzhdu said:
For some reason, I can't set anything except the govs (and they both show the same possibilities - there is no "conservative" for sleep) the rest just says !set and it's the only possibility there is.
Is it the app or is my problem ROM-specific?
Using TurboFire beta 6 ROM
Click to expand...
Click to collapse
Looks like its rom specific the app is rock solid normally. I think that the daemon config has gotten messed up in the mix of roms so ill try and see what is breaking it.
I cant seem to get the 460800mhz freq stable no matter what voltage i set. Is there a way to delete that crequency from ever being used, and how?
Works like a charm altho it seems the cm7 kernel does not support UV only OC or might be just me not understanding the UI. Antway i ll play around with it alot cuz so far it seems to ne runing alot better an utilising all freq properly.
Sent from my Wildfire S using xda app-developers app
I just spent some time doing some miscellaneous tweaks to the smartassv2 gov on the new Lionfish kernel. I am extrememly battery conscious with this tweaking as i will soon be giving this EVO to my father who has to rely on in for business. I followed the info in a few other threads and thought I had what i needed to make the correct changes so I made them. I've noticed that after the changes I've made, the cpu scaling seems to be rather erratic, meaning it never really settles at low frequency. I don't know if this is due to the stock setting of the gov as i didn't check the scaling before hand or if it has to do with my changes.
my current settings are as follows
768000= awake_ideal_freq;
245000= sleep_ideal_freq;
499200= sleep_wakeup_freq
85=max_cpu_load;
70=min_cpu_load;
38400= ramp_up_step;(left at stock)
38400= ramp_down_step;(left at stock)
10000= up_rate_us(left at Stock)
20000= down_rate_us(left at Stock)
I didn't touch the rampup/down of the scaling intervals or anything, so i don't really understand why this is happening. And sugestions out there?
shameful bump....
If you're running Sense I wouldn't recommend that low of a main clock, and honestly if your dad knows nothing of rooting I'd unroot it, leave everything stock, and let him fair with it, wouldn't want the device bugging out on him after all.
SavocaFTW is right, you are way under, just use on demand it will be just fine, if you set the evo values to low the system gets whacked out bad.
I've been using newest lionfish 1.2 and V6 supercharger with setting #8. Tried it just for kicks and its been working great for battery life. Use System Tuner Pro. Don't use Set CPU. I use ondemand 768-245. One other you thing to do is use a file manager to navigate to the system/etc folder and scroll down until you find the init.post_boot.sh file and either delete it or move it to your sd card. This is the cause of most of problems i'm sure.
For some reason I don't have an option to undervolt anything in SetCPU which I presume is there because it's listed as an app capability and it seems others on this forum have been able to undervolt with this app. I also understand that the ability to undervolt must be first unlocked by a kernel before it can be accessed through SetCPU, and I have this kernel flashed:
http://forum.xda-developers.com/showthread.php?t=1466283
which does list undervolting as a possibility. Am I missing something here? Why can I only schedule profiles around clock speed?
**As a side note, I tried out system tuner and I can reach the undervolting through system tuner but I don't really like the interface for system tuner so I would prefer sticking with SetCPU if possible (especially since I already paid for it)
**My ROM is stock, does that make a difference? Isn't the capability only dependent on the kernel?
DO NOT USE SETCPU! It keeps your second core constantly running which means terrible battery life. I recommend Gideon's script or FauxClock (Which is what I use.) I also recommend undervolting it to -75 mV.
Ok guys i have got permission to bring over lean kernel and offer support for it on xda. I will keep this post up todate with all the most recent kernel updates and news. All credit goes to imoseyon as the original op and rootzwiki for original posting. I am posting this with full permission and support from imoseyon
Mod Type:: Kernel
Difficulty:: Very Easy
Mod Status:: Stable
Apply In:: CWM Recovery
Requires Root:: Yes
Exp builds are also up and includes a bunch of Android/OMAP updates not in stable.
SOURCE:
ICS
JB
This is a minimalistic Galaxy Nexus kernel. My philosophy is to keep the kernel as lean and stable as possible, at the same time to keep the kernel as modern and close to latest mainstream linux as possible. You will see that my kernels will lack some of the bells and whistles from other kernels.
sorry host4droid is still down. Mirrors:
kk4.4 LK 9.0 beta (use at ur own risk)
JB4.3 [ stable builds | exp builds ] [ change log | exp changes ]
JB4.2:Stable
Stock JRN84D kernel
Terminal Emulator not finding scripts? Read this post.
CHANGE LOG JB 4.2
FEATURES
Patched to latest in Linux 3.0.x branch.
All unnecessary kernel components removed to make kernel lean and fast!
OC to 1.65ghz. Boot speed is maxed at 1.2ghz within kernel (in addition to ramdisk) for stability.
User voltage control
InteractiveX V2 (screen-off hotplug of cpu1) added. Select it using setcpu if you want to use it.
Ramdisk tweaks (sysctl, vm, filesystem speed, etc.)
SWAP & zram (next generation compcache) support. Run "zram enable" in terminal.
init.d support in ramdisk.
lk.conf for basic kernel configuration.
HotplugX governor (Hotplug optimized and modified for screen-off suspend).
wakelock tweaks for wlan and lte modem
lkflash - script to flash latest versions of leanKernel from Terminal (type "su" without quotes, hit enter, then type "lkflash" without quotes and then hit enter)
checkv - voltage checking script (for custom undervolting) - detailed at bottom of this post.
checkt - script that displays 1) your current temp, 2) # of times you were throttled due to temp "recently", 3) CPU trim type, and 4) CPU silicon type, etc.
Fast USB charge (by chad0982) and "ffc" toggle script by me. (Open terminal, and type "ffc" without quotes then enter)
ColorControl from both CM9 and Ezekeel (compatible with all ROMs). Helpful posts: 1and 2.
TempControl - sysfs interface to control the CPU temp threshold. Read these two posts: 1 and 2.
Variable GPU OC - sysfs interface to select GPU max speed between 307MHz (stock), 384MHz and 512Mhz. The changes take effect immediately. Check FAQ for more info and how to use it.
Custom SR Tuning - override kernel default minimum voltage for SR calibration.
SoundControl
Gamma Control
ROW scheduler v4
DIRECTIONS
Uh.... flash the zip in clockworkmod.
Thanks to forum member maddler for providing file hosting
FAQ
How do i change voltage? - Use the latest version of setcpu, leantweaks, cputuner, or your ROM's built-in tools.
Do i need to wipe dalvik/cache? - in general there's no need, but it doesn't hurt so if you have time go ahead. Posted Image I don't wipe.
Can we OC higher or add more frequency slots? - You can find the extra slots in my experimental versions.
Will this work on GSM gnexus as well? - It should. I don't have a GSM phone to test so let me know if it stops working.
What is interactiveX V2? Read this post and thttp://rootzwiki.com/topic/13092-kernel-leankernel-minimalistic-kernel-120-123111/page__view__findpost__p__342571
Are you getting Screen-Off/Sleep-Of Death (SOD), general instability, or unusual battery drain?
Before you post here (especially if you're running the experimental version), try the following steps in order:
0) dude, disable screen-off profiles if you're running interactiveX.
1) If you're running the experimental version, do you have 180mhz/230mhz and/or 1.42ghz slots enabled? If so disable them both!
2) If the above doesn't help, do you have custom undervolting enabled? If so disable it! (keep in mind that the kernel is already undervolted by default).
3) If the above doesn't help, are you using interactiveX or hotplug governors? If so change to interactive.
4) If the above doesn't help then you should not be running the experimental version. Install the stable version and try both interactiveX and interactive without custom undervolting.
If you're still getting SOD with stable/interactive, report it here.
What about call-recording? - First the app needs to support Galaxy Nexus. Find out if it does and then find out from the author of the app what kernel changes are required and let me know.
Should i set up screen-off profile? - ICS kernels have built-in screen-off profile for all governors at 700mhz. So you don't need it unless you want to set it lower than 700mhz. In general there isn't a whole lot to gain by setting it lower.
Hotplug vs interactiveX? - Read this post. HotplugX vs interactiveX
What is zram and why do i need it?
zram basically takes a portion of your RAM (10% using my script) and turns it into a compressed swap device. So in layman's terms you're extending the size of your memory (potentially from ~700mb to close to 1000mb depending on the compression ratio).
To answer the 2nd question, no you don't really need it but if used properly (using custom LK zram script) it could help you in two different ways:
1) Android OS is based on Linux OS and the OS will try to use a growing portion of your RAM for file and inode caches and if you keep your phone up without rebooting after a while you may notice things getting a little sluggish. That's because the OS is not doing a good job in dropping the caches and freeing up memory for the apps.
2) more RAM and tweaked minfree (also handled by custom LK script) could potentially allow your apps to stay in memory longer (this may or may not be desirable based on your preference of course).
In conclusion, I'd say if you're curious it doesn't hurt to try. To revert, just type "zram disable".
What's the low-down on the GPU OC?
My kernel's GPU is now set to stock 307Mhz by default. You can adjust that by using Variable GPU OC (see a separate FAQ entry below).
When you go from say 307 to 512Mhz, you will not experience near double performance increase. Due to the factors outside the GPU module (ie. memory bandwidth limitation), you can't truly OC the GPU. In fact, most people can't tell the difference between 307, 384 and 512. Nenamark2 will roughly give you the following scores: 307/25fps, 384/28fps, and 512/31fps.
Some of you have seen the note from Colin, the Google kernel engineer, not to OC the GPU because using the OV_UV voltage slot will drain the battery. My kernel uses the same voltage for both OV and OV_UV slots. So there's no danger of battery drain there.
Why are the IO benchmark test scores lower than another kernel?
Some of the kernels out there have fsync disabled to increase benchmark scores. I believe that is unsafe and could cause data corruption. I do have hooks in my kernel to disable it but I don't use it.
In real world there will not be any user perceivable difference whether you have fsync enabled or disabled.
Is there a way to tune hotplug via sysfs?
yes. Advanced users only!
My phone doesn't seem to be deep-sleeping, what gives?
(assuming you checked in the right place like cpuspy) In terms of deep-sleep, there's not a whole lot going on in the kernel. It works or it doesn't - and I can assure you that I test every release (well almost every release) for deep-sleep before I release.
19 out of 20 times it's either 1) some sort of background process that's preventing your phone from going into deepsleep, or 2) something's misconfigured in your ROM, or both. Also connecting to USB will prevent phone from going into deepsleep.
I'm having unusual battery drain - help!
First of all, our gnex has very poor battery life while in active use. It's downright horrible while screen is on - screen is definitely the main culprit and there's not a whole lot I can do about that.
Custom undervolting can help or can hurt. This is mainly due to SmartReflex (class1.5) which auto-calibrates the ideal voltages for you. In fact, with SR you don't really need to use the custom undervolting feature for frequencies other than the 2 lowest. It does a great job calibrating higher frequencies. I personally don't touch it.
The "notrim" versions are an exception because I had to disable SR1.5 for the trim override to work. There's no auto-calibration going on there. Feel free to mess with custom undervolting on the notrim versions.
Now, if you've already accepted the horrible battery life while screen is on, but have questions about battery drain while idle - read the next question.
I'm having unusual battery drain while screen is off, or phone is sleeping - help!
First, let's find out if you're phone is going into deep-sleep. Install CPUSpy, unplug phone, turn off screen, and leave the phone alone for 5-10min. Turn the screen back on, launch CPUSpy, and see if you see an active entry for Deep Sleep. If so congratulations - read on.
If you've determined that your phone is not entering deepsleep by using the above method, read my entry above that says "My phone doesn't seem to be deep-sleeping". I've heard that removing SDM.apk helps as well as rebooting the phone. Also try turning your bluetooth on and off, and launching camera app and closing it.
If you've determined that your phone is entering deepsleep fine but still feel like battery drains, read the next question.
I'm having unusual battery drain while phone is in deep-sleep - help!
First make sure you are absolutely positive that deep sleep is working (read the previous question).
While on my kernel *and* connected to Wifi, you shouldn't drain more than 1% battery per hour *average* while in deep sleep (based on 5-8 hour continuous deep sleep). With wifi turned-off, my guess is probably no more than 1-3% per hour, depending on signal strength.
tip 1: If above is not happening for you, first charge the phone all the way and reboot. Let things settle a bit - give it a day or so. If you're using Battery Monitor Widget (which is not accurate for gnex), things should eventually settle between -2mA and -60mA per sample.
tip 2: Install BetterBatteryStats and look at which wakelocks dominate. Google search for names of the wakelocks to see how you can fix them.
tip 3: http://checkthis.com/d87t
If nothing seems to help, you can try the "notrim" version, but stick to speeds between 350 and 1350 (don't use OC slots). The notrim version has SR1.5 disabled which could help for those of you with drain issues on my other kernels.
What is tempcontrol and how do I use it?
First, read these two posts: 1 and 2.
Although tempcontrol was designed to be used with the experimental notrim builds because the cpu gets hotter in notrim frequencies, you can actually use tempcontrol to throttle lower frequencies. I haven't tried myself, but theoretically you can set your top speed at say 1.2Ghz and use tempcontrol to throttle at say 60C (instead of the stock value of 63C) resulting in slightly cooler phone. Theoretically.
What is SmartReflex?
SmartReflex performs continuous dynamic voltage scaling around the nominal operating point voltage according to silicon characteristics and operating conditions.
My stable and experimental builds will have SR Class 1.5 enabled by default.
You can disable SR via sysfs
How do I use Variable GPU OC?
You can use Lean Tweaks by Jake, or use the built-in "oc" script. Both leantweaks and my oc script will create an init.d script so the setting sticks at boot. My "checkt" script will also show the current GPU max speed. Note that 512MHz will probably not work for everyone.
307Mhz (stock) is set default by the kernel.
Open Terminal, and type for stock speed of 307Mhz: oc gpu 0
for 384MHz: oc gpu 1
for 512Mhz: oc gpu 2
What are the available sysfs options?
Check this post (thx byrong)
Which governor should I use on JB?
As usual I'd recommend trying all the governors and see which one works best for you. Stock JB, however, is optimized for interactive. The OS will automatically modify various interactive governor parameters on the fly while you're using the phone as part of "project butter". Namely, the following parameters are constantly adjusted by the OS: boostpulse, timer_rate, min_sample_time, hispeed_freq, go_hispeed_load, and above_hispeed_delay.
I hope this helps people if there is any other information you might want added just ask and i will do my best to come up with a comprehensive guide.
Donate to your favorite charity, or donate to imoseyon.
Did you ask Imoseyon before you posted this?
Thanks for bringing the thread over to XDA. Hopefully you got the necessary permissions, for the sake a peaceful thread. Its good to have most developments of the GNEX here and I finger tip away.
Sent from my Galaxy Nexus using xda premium
I've heard a lot about this kernel!
yes this is with his permisson
ajf64 said:
No i didn't ask him but i did put all due credits in it and it is in every other gnex forum but the sprint one all brought over by other people so if he has a problem with this he can feel free to pm me and i will get it removed i just figured it give us some easier access to his great kernel. In no way am i claiming this to be my work all support should be directed at the original thread op. I was just trying to make access to his kernel a bit easier for all xda users
Click to expand...
Click to collapse
That's all hunky dory but just doing things without asking the developer is just not right. Regardless if he has an issue or not. Its like you make something you work diligently on and then somebody just posts it somewhere else.
I dunno maybe its just me but its just common courtesy.
Sent From My Toro+ via SkyBlue Tapatalk
Thanks op.
#inb4close
#ReOpened
Sent from my Galaxy Nexus using Tapatalk 2
all fixed
ajf64 said:
well then sorry for posting it will a mod please delete this thread before it becomes a flame pit
Click to expand...
Click to collapse
Doesnt need to be deleted.. if just ask him if its alright.. thats fine enough
ÜBER™ said:
Doesnt need to be deleted.. if just ask him if its alright.. thats fine enough
Click to expand...
Click to collapse
Why do you always ruin the flaming? With your...good nature...and your rap music.
Thanks for linking. You can still ask dev for permission but I get what you're trying to do. I prefer xda since this is where I have gotten help with every phone since my nexus 1.
Sent from my Galaxy Nexus using XDA Premium HD app
Well i have gotten permission to post this from imoseyon and to keep this thread updated on xda sprint forums for him so it looks like we are all set he got back to me alot faster then i thought he would so every thing should be all good guys
and yes jayare313 i am so used to finding every thing i need on xda some times it s a pain having to check 3 or 4 sites to see if any of your mods for your rom are updated
Sorry. 3 issues here:
1) I need to verify permission from the developer and he needs to verify that he is going to support it here. If someone downloads it, flashes it, and somethings wrong.......who is going to give answers and support it? We have an active community who can help, sure, but the developer has to actively support it here. If he were ready to give support here, he would have posted it here already. And even then it would have to go in general unless he started the thread.
2) There is no source provided in the OP. Kernels must be GPL compliant and listed in the OP.
3) If you did not create it, do not post it in the development section.
Alrighty. Everything should be good now. I'll be keeping an eye out.
OP will be updated soon, with source and I've spoken to the developer.
Thank you guys.
---Jay--- From the GNex
Well, I will say I like having this thread here. So thanks to the op.
Sent from my Galaxy Nexus using Tapatalk 2
I will be updating the thread when i get home today and be offering any support you guys may need for this kernel
MichaelMcEntire said:
Well, I will say I like having this thread here. So thanks to the op.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I totally agree. Thanks to OP for the thread and imoseyon for the kernel
Sent from my Galaxy Nexus using xda premium
Np guys any time and if there is any thing i can help with just ask i plan to provide full support for this kernel. Also if there are things you wish to have added feel free to post them as well i have permission to compile my own versions of lean kernel with cherry picked features from his repository and to add features to it. I look forward to your feedback.
is 4.2 jb cm10 compatible
twoeleven99 said:
is 4.2 jb cm10 compatible
Click to expand...
Click to collapse
Yes
Sent from my Galaxy Nexus using xda app-developers app
Welcome to decimalman's kernel playground!
As the name suggests, dkp is a hodgepodge of features and tweaks that I wanted to play with. It should get excellent battery life without feeling sluggish. It doesn't come with its own tuner app, so pick your favorite. Personally, I like Trickster MOD and Kernel Adiutor, so I go out of my way to make things work in them. Most other apps should work, too.
Features:
Overclocking up to 2.1 GHz, but you'll need to increase your voltages to get there (if you can get there at all)
Underclocking down to 54 MHz, with stability improvements
Undervolting compatible with most apps
Fast charge without unplugging first
Glorious animations for the notification and softkey LEDs
Well-integrated erandom means you don't need CrossBreeder or Seeder (recent AOSP builds use ISAAC instead)
freelunch and tierservative governors for optimal battery life without sacrificing responsiveness
Automatic mpdecision and auto-hotplug are only enabled when needed
Adjustable minimum voltage for stability on finicky processors
Optimized UKSM to free up some extra memory
Code optimizations for size and speed
Compiler optimizations (-O3, LTO, and more) because faster is better
Donors: Thanks, everyone! Your generosity is much appreciated. :good:
drpenguino, 0xScott, vmancini3 (twice! :good, Ch4m3l30n, rompnit, Mystique, ryandubbz, techdog, ElwOOd_CbGp, ScOULaris, ZipAddict
Remember:
Nandroid!
last_kmsg and/or logcat or it didn't happen.
Other kernels have their own threads or forums. Discuss them there.
Image dumps (settings, battery life, whatever) belong inside [HIDE][/HIDE] (that's HIDE, if you're on the mobile app) tags.
Be silly. We're here to have fun.
Installation:
Reboot to recovery. I recommend that one recovery...you know, the one that flashes zips? I forget what it's called.
Flash dkp. Optionally, rename and flash dkp-vmin-XXX.zip (see below).
Reboot.
Undervolting:
Undervolting on dkp is more complex than other kernels. Some processors get unstable at lower voltages, so (like the stock kernel) dkp keeps the processor voltage above 1150 mV by default. I refer to this limit as the minimum voltage. In order to undervolt, you'll need to lower the minimum voltage: if you use Trickster MOD or Kernel Adiutor, just disable "Override Minimum Voltage", otherwise rename dkp-vmin-XXX.zip to e.g. dkp-vmin-600.zip (which would apply a 600 mV minimum voltage) and flash it. If this causes instability (crashes, audio/video glitches, etc.), try using dkp-vmin-XXX.zip to apply a higher minimum voltage (somewhere between 950 and 1050 mV seems to work well for most people).
Downloads:
MediaFire:
All Downloads
dkp-vmin-XXX.zip
Solidfiles (Make sure you have an adblocker!):
All Downloads
dkp-vmin-XXX.zip
Source: I'm always happy to see my code used, so cherry-pick away. I'll even put together feature patches if you ask nicely.
Bugs:
Let me know.
Stable changelog:
3/3/13: Initial release for d2spr. Didn't get around to making threads for other carriers.
4/8/13 (3.0):
FauxSound support
Strip more useless stuff
A few bonus optimizations
4/8/13 (3.4):
Port everything except erandom from 3.0
Enhance cpufreq for easier configuration
4/24/13 (3.4):
Bugfixes: better support for tuner apps, fixed potential SOD bugs, automatic mpdecision fixups, etc.
Lots of CM/CAF/Linux updates
Working AssWax governor
Trinity colors support
sio, zen I/O schedulers
erandom is back!
Built with a super-fancy Linaro GCC 4.8.1-dev compiler toolchain for maximum -O3 goodness
Probably lots more, but there's hundreds of commits to sort through...
5/29/13 (3.4):
Bugfixes: better overclocking support, better hwrng support, etc.
Updates: new CM updates, Linux 3.4.47, updated FauxSound driver, added invisiblek's new panel colors interface
Automatic auto-hotplug
New optimizations, including link-time optimization and an updated GNU+Linaro GCC 4.8.1-dev toolchain
6/14/13 (3.4):
Bugfixes: fix several critical bugs in the 5/29 release.
9/7/13 (3.4):
Fixes for OC, UV, auto-hotplug.
A few new optimizations.
Synced up with CM.
9/20/13 (TW):
Ported everything from AOSP to TW.
9/20/13 (4.3):
Merged 4.3 from CM into the existing 4.2 code.
Current experimental branches:
Nothing interesting at the moment.
Goodies:
dkp doesn't come with its own splash screen. However, the dkp installer (i.e. the install zip) is smarter than you think, and can apply a custom splash screen for you. Here's how:
Create a folder on your internal storage named "dkp"
Copy a PNG image into the directory, and rename it "splash.png". Alternatively, copy an RLE image (i.e. from a flashable custom splash screen zip) and rename it "splash.rle". Ideally, the image should be roughly 1280x720 to begin with, since it won't be resized.
The image will be used as your splash screen whenever you flash dkp. Reflash to apply initially.
mikedavis120 has put together a how-to video that covers tweaking dkp for optimal battery life. If you're new to dkp, take a look! He also put together a zipped collection of apps that will come in handy while tuning dkp. It also includes a flashable zip, "dkp-debug_v1.zip". After flashing it, running
Code:
su
dkp
from a terminal emulator will collect lots of useful debug information that will make it much easier for me to track down the issue you're having. :good: mikedavis120 recommends installing SuperSU (included in the zip) instead of what's included in you ROM.
sysfs:
It's possible to adjust all the settings available in dkp without using apps. Because they show up as files, settings can be adjusted with file managers, terminal emulators, adb and initscripts. Here's the most interesting files inside sysfs:
/sys/devices/platform/mipi_samsung_oled.513/lcd/panel/panel_colors (not available on newer AOSP builds): display tint (0 = very red, 2 = default, 4 = trinity colors)
/sys/class/misc/gammacontrol (only available on newer AOSP builds): various color controls. See this post for details on enabling Trinity colors on builds that use these controls.
/sys/devices/system/cpu/cpu<N>/cpufreq/UV_mV_table: voltage table
/sys/devices/system/cpu/cpu<N>/cpufreq/scaling_...: scaling_governor is the governor, scaling_min_freq and scaling_max_freq are the minimum and maximum frequencies, scaling_available_governors and scaling_available_frequencies show the available governors and frequencies
/sys/kernel/dkp/force_fast_charge: fast charge
/sys/kernel/dkp/link_core_settings: when linked (the default), frequency settings and some governors are automatically copied to the other core
/sys/kernel/dkp/vmin: minimum processor voltage in mV
/sys/kernel/mm/uksm/run: activate UKSM
auto-hotplug tuners:
These show up in the governor settings for any governor that doesn't do its own hotplugging. They only take effect when using auto-hotplug, so you'll probably need to disable mpdecision in Trickster.
hotplug_intpulse: when set to 1, automatically turns core 2 on whenever the screen/buttons/whatever is pressed. Default is 0.
hotplug_sampling_periods: number of samples to use for average number of running tasks. Default is 15.
hotplug_sampling_rate: number of 'jiffies' (currently 1 jiffy = 10 ms) between each sample of running tasks. Default is 20 (0.2 sec).
hotplug_enable_one_threshold: the average number of running tasks required to turn core 2 on, multiplied by 100. Default is 125 (1.25 tasks on average).
hotplug_disable_one_threshold: the average number of running tasks required to keep core 2 on, multiplied by 100. Default is 250 (2.5 tasks on average).
freelunch/nanolunch tuners:
freelunch and nanolunch aren't materially based on other governors, so their configuration is quite different than other governors. There's lots of tuners, since I haven't really decided on an ideal tuning. I encourage experimentation! I'll explain a bit of how these governors work before actually listing the tuners.
Generally speaking, there are two modes: in "normal" mode, sampling is done occasionally and frequency is generally increased slowly; in "interactive" mode, sampling is done much more quickly, and frequency increases much more quickly. "Interactive" mode ends after several samples of very low usage. The idea of a "hispeed" frequency is used in lots of governors, and it refers to the frequency that the CPU will jump to when more CPU usage is needed; generally, it's a generous estimate of how much CPU will be needed. Here, the hispeed frequency is adjusted on-the-fly, increasing when more CPU is needed and gradually decreasing when the CPU is idle. In "interactive" mode, the hispeed frequency is kept fairly high so that everything will feel snappy.
Hotplugging is taken care of in the least complicated (and in my opinion, most reasonable) way possible: if core 1 is using lots of CPU, and there are several tasks running (in other words, if it's likely that core 2 will have something to do), core 2 is turned on; if either core isn't doing much except using power, core 2 is turned off.
sampling_rate: the usual
hotplug_up_cycles: number of consecutive heavily-loaded samples before core 2 is turned on
hotplug_down_cycles: number of consecutive lightly-loaded samples before core 2 is turned off
hotplug_up_load: number of running tasks required to bring core 2 online
hotplug_up_usage: number of used CPU cycles (in thousands per second) required to bring core 2 online
hotplug_down_usage: number of used CPU cycles (in thousands per second) required on both cores to keep core 2 online
overestimate_khz: number of CPU cycles to overshoot usage by in "normal" mode
hispeed_thresh: if CPU usage is within this many cycles (in thousands per second) of the maximum frequency, frequency will be increased to the hispeed frequency. Generally, hispeed is pretty low in "normal" mode, and fairly high in "interactive" mode.
hispeed_decrease: when the CPU is sitting idle, the hispeed frequency is decreased by this amount each sample (this isn't ideal, but it works)
interaction_hispeed: the initial hispeed frequency when switching to "interactive" mode
interaction_return_cycles: number of consecutive lightly-loaded samples before returning to "normal" mode
interaction_return_usage: number of used CPU cycles (in thousands per second) required to stay in "interactive" mode
interaction_panic (nanolunch only): when set to 1, allows aggressively jumping past the current hispeed frequency under some circumstances
interaction_sampling_rate/overestimate_khz: equivalent to the "normal" versions of the tuners, these take effect in "interactive" mode
Just loaded it on pa 3.15
Sent from my SAMSUNG-SGH-I747 using xda premium
It doesn't say that it has morfic colors, but looks like it does. Gonna give it a whirl
Sent from my SGH-I747 using xda app-developers app
rmead01 said:
It doesn't say that it has morfic colors, but looks like it does. Gonna give it a whirl
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
It doesn't, but I'll merge it and put out a test build.
decimalman said:
It doesn't, but I'll merge it and put out a test build.
Click to expand...
Click to collapse
Is it possible they are left over from a previous kernel? Because I can def tell the difference usually and seems like it does.
Either way, advise when its updated. This governor seems solid so far.
Sent from my SGH-I747 using xda app-developers app
rmead01 said:
Is it possible they are left over from a previous kernel? Because I can def tell the difference usually and seems like it does.
Either way, advise when its updated. This governor seems solid so far.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
dkp is based off clean CM source, so it shouldn't have been merged already.
I've got test builds compiling now, and the 3.4 builds will be up shortly. Flashing the trinity-colors test build and this zip will enable trinity colors. You can toggle it with
Code:
su
echo X >/sys/class/mdnie/mdnie/trinity_colors
where X is 0 to disable or 1 to enable.
Edit: and sorry for taking so long to respond.
Edit 2: 3.4 builds are up. http://d-h.st/7Ae
Thnx for this kernel
decimalman said:
dkp is based off clean CM source, so it shouldn't have been merged already.
I've got test builds compiling now, and the 3.4 builds will be up shortly. Flashing the trinity-colors test build and this zip will enable trinity colors. You can toggle it with
Code:
su
echo X >/sys/class/mdnie/mdnie/trinity_colors
where X is 0 to disable or 1 to enable.
Edit: and sorry for taking so long to respond.
Edit 2: 3.4 builds are up. http://d-h.st/7Ae
Click to expand...
Click to collapse
Maybe I was just seeing things, had just watched jurassic park in 3d.
New "test" build flashed as well as the file to enable it. Thanks for the addition. It's very hard to go back to normal once you've been smurfed depending on your display.
Only issue i'm having ATM is the ability to change the voltage table. My phone doesn't handle undervolting as well and i run a minimum of 950 baseline, if not 975. One of my normal apps wasn't able to set the voltage at all. I'm trying to use performance control which I don't like. It crashes trying to set the voltage on boot but at least I can go in and manually set the values on boot and they stick.
One last question, since this is your kernel, what scheduler do you recommend pairs well to freelunch? What would you use for performance and what would you use for batt?
rmead01 said:
One last question, since this is your kernel, what scheduler do you recommend pairs well to freelunch? What would you use for performance and what would you use for batt?
Click to expand...
Click to collapse
+1 on these questions
Sent from my AT&T Samsung Galaxy S III
rmead01 said:
Only issue i'm having ATM is the ability to change the voltage table. My phone doesn't handle undervolting as well and i run a minimum of 950 baseline, if not 975. One of my normal apps wasn't able to set the voltage at all. I'm trying to use performance control which I don't like. It crashes trying to set the voltage on boot but at least I can go in and manually set the values on boot and they stick.
Click to expand...
Click to collapse
Answered my own problem. I installed trickster as mentioned in OP and all voltage settings stick no problem with no issues.
rmead01 said:
New "test" build flashed as well as the file to enable it. Thanks for the addition. It's very hard to go back to normal once you've been smurfed depending on your display.
Only issue i'm having ATM is the ability to change the voltage table. My phone doesn't handle undervolting as well and i run a minimum of 950 baseline, if not 975. One of my normal apps wasn't able to set the voltage at all. I'm trying to use performance control which I don't like. It crashes trying to set the voltage on boot but at least I can go in and manually set the values on boot and they stick.
One last question, since this is your kernel, what scheduler do you recommend pairs well to freelunch? What would you use for performance and what would you use for batt?
Click to expand...
Click to collapse
Personally, I don't like trinity colors, but I definitely understand the appeal. I merged this into 3.0 and 3.4, so it'll be standard from here on. I'll add a link to the enabler zip in the OP as well.
What app would you normally use? I'll try to support it, since I already provide several voltage interfaces. I didn't realize performance control was crashing (I'm not a fan either, so I only lightly tested). I recently installed Trickster and liked it, so I've been going out of my way to support it. It's also really easy to write support for, so that's a bonus for me.
As for schedulers, I'm not fussy. I've never exhaustively tested performance and battery life, so I don't have a preference and usually run noop or deadline. However, I've had nothing but bad results with ROW (phone never deep sleeps, and I haven't looked into why).
decimalman said:
Personally, I don't like trinity colors, but I definitely understand the appeal. I merged this in, so it'll be standard from here on. I'll add a link to the enabler zip in the OP as well.
What app would you normally use? I'll try to support it, since I already provide several voltage interfaces. I didn't realize performance control was crashing (I'm not a fan either, so I only lightly tested). I recently installed Trickster and liked it, so I've been going out of my way to support it. It's also really easy to write support for, so that's a bonus for me.
As for schedulers, I'm not fussy. I've never exhaustively tested performance and battery life, so I don't have a preference and usually run noop or deadline. However, I've had nothing but bad results with ROW (phone never deep sleeps, and I haven't looked into why).
Click to expand...
Click to collapse
good to know. Trickster mod works fine and you mention it in the OP and it's at no cost in the play store. I wouldn't worry.
I was using an app called kernel tuner because some others would only set 1 core to the governor and not both. I checked that trickster does indeed set both cores to freelunch so once that figured out I removed kernel tuner. Kernel Tuner also has the options for profiles which can be toggled in tasker for varies states. freelunch so far hasn't needed any changing so not worried about it at this point. just as an example, some governors would be better for screen on/off and tasker could switch these to edge out battery life.
The voltage app i was using is simply called voltage control. Kernel tuner doesn't do a nice job of voltage changes. But since trickster does both governor and voltage adjustments well. i'm using that with no problems now.
Thanks for the morfic, having a way to toggle it works well for people. it's as simple as a script so there's that.
rmead01 said:
good to know. Trickster mod works fine and you mention it in the OP and it's at no cost in the play store. I wouldn't worry.
I was using an app called kernel tuner because some others would only set 1 core to the governor and not both. I checked that trickster does indeed set both cores to freelunch so once that was made it was no problem. Kernel Tuner also has the options for profiles which can be toggled in tasker for varies states. freelunch so far hasn't needed any changing so not worried about it at this point.
The voltage app i was using is simply called voltage control. Kernel tuner doesn't do a nice job of voltage changes. But since trickster does both well, i'm using that with no problems now.
Thanks for the morfic, having a way to toggle it works well for people. it's as simple as a script so there's that.
Click to expand...
Click to collapse
I meant to test Voltage Control but Google wasn't letting me download anything. It's a common app, so I'll try to get it working regardless. Kernel Tuner doesn't currently work well with freelunch, and tends to hang when it's trying to read settings in the CPU screen. Otherwise, it's a nice app. I didn't realize it had Tasker support (I use Llama).
I've added a few extra bits to the cpufreq core, so governors that need to be set on both cores (like freelunch) will automatically apply to both cores regardless of what app is used. cpufreq will even enable and disable mpdecision depending on whether a hotplugging governor is running (though Trickster won't show that it's disabled).
I owe ktoonsez for the toggleable trinity colors. I slightly rewrote his patch, but it's still largely his code. It's my policy that anything that not all users will want should be optional and easily configurable.
Edit: I think I've got Voltage Control fixed. I should be able to get Kernel Tuner working without too much work. I haven't even looked into Performance Control yet.
decimalman said:
I meant to test Voltage Control but Google wasn't letting me download anything. It's a common app, so I'll try to get it working regardless. Kernel Tuner doesn't currently work well with freelunch, and tends to hang when it's trying to read settings in the CPU screen. Otherwise, it's a nice app. I didn't realize it had Tasker support (I use Llama).
I've added a few extra bits to the cpufreq core, so governors that need to be set on both cores (like freelunch) will automatically apply to both cores regardless of what app is used. cpufreq will even enable and disable mpdecision depending on whether a hotplugging governor is running (though Trickster won't show that it's disabled).
I owe ktoonsez for the toggleable trinity colors. I slightly rewrote his patch, but it's still largely his code. It's my policy that anything that not all users will want should be optional and easily configurable.
Click to expand...
Click to collapse
well good job so far. batt life has been top notch. minimal drain in use and my over night idle drain was only a few %. I have things setup to disable wifi when sleep and also turn off mobile data when wifi is connected. A bit over the top but every bit helps.
:good::highfive:
I know I've been grilling you today but...
Kind of curious what the new tunables do. I haven't touched anything since it's working so well but there is always that part of me that wonders what adjust parameters will do. Is there any kind of reference for this governor that could indicate that type of info?
Does your kernel support faux sound app?
stevehkim said:
Does your kernel support faux sound app?
Click to expand...
Click to collapse
Yes. 3.0 and 3.4 both have support.
As for tuneables, I've been meaning to post a writeup but haven't gotten around to it. You're not the first to ask about it.
Sent from my SPH-L710 using xda app-developers app
This is a fantastic Kernel! The battery life has been outstanding so far. Thank you for your amazing work!