Related
is there any good slim cases and not slippery back for galaxy note ?
dont want bulky but still want some protection ..
I have the elago G4 Slim Fit Case on my note atm, and I'm liking it so far. Not much in the way of protection, but it isn't slippery and the note + case still fits in my pockets.
One thing I would say though...it's a pain in the ^$#%#$% to get off once you get it on.
oopeteroo said:
is there any good slim cases and not slippery back for galaxy note ?
dont want bulky but still want some protection ..
Click to expand...
Click to collapse
I use this very slim case that ONLY offers scratch protection. Very good to hold and has a matte finish so no finger prints.
Have a look at my review thread,
http://forum.xda-developers.com/showthread.php?t=1504446
Slim, form fitting "case".
I like both the Incipio Feather UltraLight Hard Case (although it might snap/break as some have mentioned) and the Diztronic High Gloss Translucent Grey.
The Diztronic High Gloss is great, because it slides out of where ever you have it, mine is usually in my pocket and it doesn't pick up link. It's rather sticky and grippy, in a good way, doesn't feel like it will slip out of you hands or lose grip of the phone. It's very slim, so the phones slender sexy lines are kept and it shows through the semi see through material.
Both are very minimalist, the TPU protects slightly more, since it's a tad thicker, bouncy and raises above the screen face some.
That's IHMO, YMMV.
-CC
+1 for elago slim... I had a 4ft drop the other day with it on, and my note came out scratch free because it landed right on the corner of the case (whew).... using the elag + sgp protector and liking the setup so far.
Sent from my GT-N7000 using Tapatalk
I just ordered this one:
https://www.speckproducts.com/smartphone-cases/samsung/fitted-for-samsung-galaxy-note.html
I will let you know how I like it when I get it next week. The Speck Fitted cases my wife has used on her iPhone 4 and 4s have been very durable and given great protection.
I got 3 cases for my Lumia 900 and wanted to do a quick review of them so that it could help some of you guys decide one which ones to buy.
Prices listed are directly from the manufacturers website, I am sure you could find them cheaper elsewhere.
Incipio NGP
Price: $19.99
This case isn't too thick but it is thicker than the AT&T Gel case and will offer more protection against drops. Incipio's NGP is a TPU style case, so it's more stiff than traditional silicone cases and it doesn't attract any lint. The fit is very tight and leaves all the ports open, and covers all the buttons.
The only issue I had with this case was that the buttons are a bit tough to press. Especially when taking photos because it's hard to press the camera button on it's first stage for focus, I found it was a bit frustrating when using this case and taking photos. Other than that it's a very nice TPU style case that isn't too expensive.
AT&T Gel
Price: $20.00
This is more of a silicone type case, it's very flexible and has a smooth feel and doesn't attract lint. All the ports are left open, the buttons are covered.
This case is awesome if you like the look and feel of a naked phone because you can hardly tell this case is on the phone. The buttons are very easy to press. It does offer some protection but not as much as the Incipio NGP. I really enjoyed this case due to the fact that it feels like there's no case on the phone at all. It's not too pricey at 20 bucks.
Case-Mate Tough Case
Price: $35.00
This case has an inner soft silicone piece and an outer polycarbonate shell that fits over the silicone. The shell also has a rubbery coating. This case is the thickest of the three, it is also the most protective against drops. I really like this case due to the protection it offers. It fits very well.
This case seems like something Otterbox would have made, it reminds me of their commuter series cases. It leaves all the ports open, it covers the buttons and they are easy to press. The one thing to note is the camera cutout is much small than the other two cases which I personally like, that means that little chrome strip in the back is less likely to get scratched up.
The silicone on this case does collect a bit of lint which is kind of annoying. It's a bit of a trade-off for the protection. It fits very well and looks good. It does thicken the phone up a good amount but that doesn't bother me personally.
Overall it's a very nice case, and the best choice if you want protection, a little more expensive than the others but you are getting something more protective.
[Unfortunately I don't have enough posts to add my link to all the photos I took... :-(
I also have the Incipio NGP case in Translucent Mercury and I have also noticed that it is hard to press the buttons. I'm not sure if my case is bad but it looks like the buttons on the case are about 1-2mm lower than the buttons on the phone which I think is causing the button problem.
I also have the casemate barely there case in black which matches with the phone color really well. My only problem with the case mate is the top and the bottom of the phone is exposed with no coverage. the only top and bottom protection seems to come from the case being a little longer than the phone causing a some what annoying over hang.
I'm kinda new here too so I can't post any pictures but I will try too when I am able too.
I thought about purchasing the barely there case but it just doesn't offer the protection I need. I am pretty happy with their Tough Case though.
I wanted to update this now and post the link to the photos, so here they are!
Thanks for the photos.
Just what I wanted to see.
Hi im looking to decide between the Spigen Neo Hybrid and Spigen rugged armor. I have read many reviews but none of them seems legit, so any user who have any of these cases please confirm this for me:
SPIGEN NEO HYBRID:
1. Does the sides of the plastic bumper tuns yellow after a while of use like a month or two? and if it does looses its color can i buy the bumper separately?
2. Does it provide better protection on drops as compared to the rugged armor?
SPIGEN RUGGED ARMOR:
1. Is the case too slippery?
2. How is the drop protection on this case?
I'm looking for protection over looks so please help me make a valid choice, and if you think that both the cases sucks feel free to suggest me the one you prefer.
Thanks in advance.
Hi, I have the Spigen Rugged Armor, this case is good looking if you don't mind that the OnePlus logo is hidden with this case. This case also have a good grip and good drop protection.
I once dropped my 3T while using this case with the screen facing down the concrete. Fortunately, this case protected my screen from shatter. I recommended you get this case if you spend majority of your work outside office. Better safe than sorry.
I bought the Rugged Armor and I have to say I'm really impressed. It's thin, feels great and definitely isn't too slippery. The carbon fiber looks good too. The only issue is I'm not sure how much drop protection it would provide because like I say it is very thin. There's a lip over the screen but I can imagine the phone becoming disfigured underneath if it was dropped from an appreciable height. I'm usually quite careful though so I'm trying not to worry about that
Thanks for the reply guys I was slightly inclined towards the rugged armor my self, it looks frekin awesome. I'll go for it then.
Currently using the Spigen rugged armour as I was afraid of finger prints with the clear variant. Not as slippery as I expected and gives all the protection you need, saved my phone from a couple of drops and it is scratch free
I'm actually using both. I initially only had the rugged armor and then bought the Neo hybrid. I found with a glass screen protector the Rugged armor doesn't play well with it. With just a plastic screen protector the Neo hybrid looks really nice. I love em both though
I have one and it's not really a good "feel" for me. It's a great case, just not to my liking. I am rocking this one now: OnePlus 3T Case, OnePlus 3 Case, Nillkin Synthetic Fiber Premium Bumper Case Cover [Compatible with Magnetic Car Holder] for OnePlus 3T / 3 - Black. It's a lot like the OEM and fits great. With that and the LiquidSkin protector, I really like the slimness and the feel.
Been using the rugged armor for about a month.
- Not slippery
- Good protection
- Not too thick
- I think the CF is stupid. I want it plain.
9/10 would buy again.
Aukrus said:
SPIGEN NEO HYBRID:
1. Does the sides of the plastic bumper tuns yellow after a while of use like a month or two? and if it does looses its color can i buy the bumper separately?
2. Does it provide better protection on drops as compared to the rugged armor?
Click to expand...
Click to collapse
Have had the OP3T with that case for 2 months now
1. No they don't. I just have one little scratch on the corner revealing a small white line (barely visible)
2. No idea since I haven't dropped the phone a single time. I can just say that the bumper makes the case kind of more slippery actually. Previously I rocked Spigen Ultra Hybrid on Nexus 5/Nexus6/Galaxy S6 and it was much more grippy. I felt much safer while for example on a bus, now I aim to hold it with two hands since I don't feel the grip this well. The Neo's advantage over Ultra Hybrid though, is the fact that the whole product is relatively soft and flexible so that it doesn't damage the device at all as UH used to with its back made of hard solid plastic.
9/10 very decent, non-bull**** and SOLID case anyway. Totally recommend it, the notices above are just the matter of my fussiness
I always rock an Otterbox Commuter case on my phones mainly for work conditions can get rough at times. From what I've seen, Otterbox is only offering their Defender series (too big and bulky) and their Symmetry series (thinner, one piece case). I've decided to go with the Symmetry series and I'm pleasantly surprised. It definitely adds a little bit of bulk, but not as much as the Commuter, while offering great all-around protection. The one piece design is easy to put on and remove (unlike previous Symmetry cases I've tried on other phones). I do wish that there was a bit of grip on the sides like the Speck Presidio series cases, but I like the design. Unfortunately the only options were clear, pink, or black.... so I went with black.
So what's your choice for a protective case? Share pics and comments.
I too normally use the Otterbox defender for my phones but I wanted to try something new. I bought a poetic revolution for myself and a supcase unicorn beetle pro for my wife. They appeared a little slimmer and had port covers which I wanted. Amazon says they will arrive tomorrow so I shall see.
holden56 said:
I too normally use the Otterbox defender for my phones but I wanted to try something new. I bought a poetic revolution for myself and a supcase unicorn beetle pro for my wife. They appeared a little slimmer and had port covers which I wanted. Amazon says they will arrive tomorrow so I shall see.
Click to expand...
Click to collapse
I had the unicorn beetle pro for my Nexus 6 and it's a nice cheaper alternative to the defender, but it still adds more bulk than the commuter case. I may look into the poetic case though. Let me know how they work out for you. ?
I went to Best Buy and tried out the Defender case. Definitely too bulky and I hate the built in screen protector (and it doesn't sit well over a glass screen protector, even if you take out the built in one).
You may not like the poetic as it has the built in screen protector. I'm used to the bulk of the defender so I'm not a great judge of the size. I will tell you the poetic is smaller then the supcase unicorn beetle. Built in port covers are nice too, overall it is a smaller rugged case you can say.
just received the Poetic Karbon Shield Slim Fit Case With Anti-Slip Side Grip and Carbon Fiber Texture. it's a slimmer-fit case that offers (what i believe is) more protection than a thin TPU case. sharing pictures for those interested to know how it fits the G6. i also have tempered glass screen protector on the phone as well. you'll also notice in the first pic that wireless charing works with the case on the phone. i usually go with a much thinner case but i really like the look and feel of this one. will give it a week or so before i decide if it's a keeper. (please excuse the dust in the pictures - our HVAC ducts were being cleaned when i took these pictures).
Went from a Note 3 with Otterbox Commuter to a G6 with Spigen "Tough Armor" case, and am satisfied with it. Feels like it provides just as much protection as the Otterbox Commuter, yet not adding quite as much bulk. I'm kinda rough with my phones sometimes, and I'd have peace of mind if I were to accidentally drop my G6 from waist-height or so.
If you choose to go with Spigen, definitely buy it off Amazon, rather than directly from Spigen's website; it's cheaper off Amazon.
cortez.i said:
just received the Poetic Karbon Shield Slim Fit Case With Anti-Slip Side Grip and Carbon Fiber Texture. it's a slimmer-fit case that offers (what i believe is) more protection than a thin TPU case. sharing pictures for those interested to know how it fits the G6. i also have tempered glass screen protector on the phone as well. you'll also notice in the first pic that wireless charing works with the case on the phone. i usually go with a much thinner case but i really like the look and feel of this one. will give it a week or so before i decide if it's a keeper. (please excuse the dust in the pictures - our HVAC ducts were being cleaned when i took these pictures).
Click to expand...
Click to collapse
I almost went with this case but I got this one instead. It's the Caseology.
This Poetic has been great for me after a few days of use. Lightweight, decent protection, and good grip.
Poetic Affinity Slim Fit for LG G6 Clear Case With Anti-Slip Side Grip and Reinforced Corner Protection Bumper for for LG G6 Black/Clear https://www.amazon.com/dp/B06W5K3YWF/ref=cm_sw_r_cp_apa_N4v7ybREB4YDC
I wanted to order Poetic but they don't ship to EU and i get Ringke Fusion but still waiting for the phone.
cortez.i said:
just received the Poetic Karbon Shield Slim Fit Case With Anti-Slip Side Grip and Carbon Fiber Texture. it's a slimmer-fit case that offers (what i believe is) more protection than a thin TPU case. sharing pictures for those interested to know how it fits the G6. i also have tempered glass screen protector on the phone as well. you'll also notice in the first pic that wireless charing works with the case on the phone. i usually go with a much thinner case but i really like the look and feel of this one. will give it a week or so before i decide if it's a keeper. (please excuse the dust in the pictures - our HVAC ducts were being cleaned when i took these pictures).
Click to expand...
Click to collapse
I just ordered this one on Amazon. Saw the office and couldn't pass it up. Glad to see it looks good, and works well with a glass protector. I got the Spigen glass 2 pack as I've always liked everything Spigen makes.
Was gonna get the unicorn beetle that I had for my s7e, but don't think I need that much protection on this one, plus no edge screens that I need to prevent my palm from hitting lol.
Update: I hate the Karbon case. Doesn't fit tightly and leaves gaps at the edges on the front. I guess for $8 it'll hold me over until I get a good case, but this one is not staying pass this weekend.
Sent from my LG-H872 using Tapatalk
I would go for the Spigen Rugged Amor, it’s much slimmer and provide pretty much the same protection as the symmerty series http://www.the-reviewr.com/best-lg-g6-case/
Had that rugged armor for my v20 and loved it. Decided to go with the neo hybrid for the g6
Spigen Neo Hybrid LG G6 Case Herringbone with Flexible Inner Protection and Reinforced Hard Bumper Frame for LG G6 (2017) - Gunmetal https://www.amazon.com/dp/B01N4QCEHA/ref=cm_sw_r_cp_apa_2o68yb7SMM8C1
djjroc007 said:
Had that rugged armor for my v20 and loved it. Decided to go with the neo hybrid for the g6
Spigen Neo Hybrid LG G6 Case Herringbone with Flexible Inner Protection and Reinforced Hard Bumper Frame for LG G6 (2017) - Gunmetal https://www.amazon.com/dp/B01N4QCEHA/ref=cm_sw_r_cp_apa_2o68yb7SMM8C1
Click to expand...
Click to collapse
Do you have pics of what it looks like on your phone?
Thanks!
So guys I'm searching for a good protective case that doesn't add too much bulk. I'm torn between the Poetic Revolution and the Supcase Unicorn Beetle. I like the way the Poetic looks except for the cutout on back, I prefer the Unicorns Cutouts. If anyone here has any pics to share, that be awesome. Or unless someone has another case to throw in the mix. THanks
Case reviews: Rhinoshield CrashGuard & SolidSuit, Zeking Ultra Slim, Crave Slim Guard
i've used a number of cases that you can easily purchase from amazon before including the spigen tough armor, spigen neo hybrid, spigen crystal shell, ringke fusion and the rhinoshield crashguard. I think the 2 most important aspects of a good phone case is reinforced corner protection and elevated front edge to protect the screen. When I got the pixel 2 XL, I started looking for a slim yet protective case and I ended up trying the 4 cases below. I used each case about 1-2 weeks and thought I'd share my thoughts. I did receive the Rhinoshield cases from the company for free but they are not involved with my write up in any way, shape or form.
The photos attached are in accordance to the order of which the cases are reviewed.
Rhinoshield CrashGuard bumper case:
This was my favorite case when I had my galaxy s7 and when I moved on to the LG G5 then G6, I was disappointed to find out that they don't make the CrashGuard for them.
From my experience using this case with the galaxy s7 (which I had for about a year before it was stolen...), this case simply works. I am not the best when it comes to handling my phone therefore it gets dropped a lot; this case really does the job well when it comes to impact protection while being minimalistic. During the past 2 weeks with the case, I've dropped my pixel 2 a few times from different heights, mostly from standing height and some from when I get out of the car and the case has been effective. According to Rhinoshield, their cases have a 11.5 ft impact resistance rating which supposedly far exceeds the " US MILITARY DROP TEST STANDARD".
Many others have commented on how slippery this case is. Well, it is and that's because Rhinoshield now coats the cases to make them more stain resistant. For me, personally, I don't mind as I find it easier to slide in and out of my pockets.
Some physical changes I've noticed is that the case fits A LOT more snug to the point where it is quite difficult for me to take the phone out of the case. That's an inconvenience for me as I fly a drone here and there and in order for the phone to fit into the remote controller I have to take the case off. Now I may have to buy a separate phone holder for the remote controller. Another change that's worth pointing out is that in my old s7 case, the raised lip on the back of the case was more pronounced at the corners and the top and bottom edges. This gave me more of a piece of mind since it is a bumper case and the back of the phone is exposed. However, it seems like they have eliminated that from their design of the new cases and I wish they kept that. Lastly, now you can change up the color of the power button but the colored buttons have to be purchased separately. The power button is very responsive but the volume rocker you'd have to press a little bit harder.
Other non-noticeable changes they've made since I had their case for the s7 is they now use a different material (fancy name 'ShockSpread Material') for their cases which is suppose to be lighter, thinner but just as protective and durable.
The case is friendly with their screen protectors, as well with the Sparin TPU screen protector that I got from amazon. In terms of skin, it will not work with the Dbrand precision fit skin but fine with standard fit. However, it will leave an indent on the standard fit skin as shown in photos.
Lastly, if you happen to have a Feiyu tech SPG-c gimbal, with the heaviest counterweights the phone with this case just barely works.
Rhinoshield SolidSuit
Overall, very similar to the CrashGuard bumper case.
I'll highlight the differences:
- compatible with the RhinoShield add-on lens
- of course, heavier and bulkier (heaviest of the 4)
- feels very solid because of the overall construction, as well the back is protected
- most of the finishing is the same as the CrashGuard, however the back of mine has the carbon fiber finishing which I guess made it less slippery
- volume rocker is much more responsive than the CrashGuard
- did not work at all with the Feiyu tech SPG-c gimbal
Zeking ultra slim TPU case from amazon canada
In my opinion, very good case. For less than $10, you get padded corner protection plus raised front edge without much added bulkiness; this is just as good as cases such as ones from Spigen or Ringke but for 1/3 or 1/2 the price.
It is made of TPU and I haven't had the case long enough to speak about yellow-ing, but the TPU feels decent not cheap. On the inside of the back of the case, there are these microdots and I can't understand their purpose. You can actually feel them when you brush you finger across. The side buttons are responsive, clicky. A really thoughtful and unique design is that along the sides of the case the TPU's texture is different and it allows for better grip (almost like there's a very smooth sandpaper strip). The advantage of this case in comparison to the two Rhinoshield cases above is that it does feel slimmer in hand.
When it comes to impact protection, it doesn't have that "over 11 ft of impact protection" that's marketed for the Rhinoshield cases, however the few times I dropped the phone in this case it was completely fine.
I did try to use this case with the Dbrand 'precise fit' skin. It will not work well with the skin if you have the tendency to take your phone in and out of the case. As i took my phone out, it lifted the skin that goes around the the corner on the side of the phone. On the other hand, the 'standard fit' skin did just fine. In terms of screen protectors, it is compatible with the Sparin TPU screen protector as well as the protectors from Rhinoshield.
Similar to the Rhinoshield CrashGuard, this barely worked with my Feiyu Tech SPG-c gimbal.
Crave Slim Guard from amazon canada
This case is very similar to the Ringke Fusion in a sense that both have the TPU bumper that goes around the case, and the clear polycarbonate back. This case, however, has a very pronounced elevated front lip to the point where it almost feels like the phone is sunken in inside the case. It's very good if you're looking for extra raised front protection, however when you're swiping left or right on the screen you will feel the edge more so than the other cases. It may help if the company just round off the raised edges a little bit more. A thoughtful part of their design is that they raised the back corners a tiny bit; my guess is they are there to raise the back a little bit so when you sit the phone on a flat surface it doesn't scratch up the polycarbonate back. All the buttons super responsive and clicky; probably the best buttons of the 4 cases. The phone does feel pretty slim in this case and I think even slimmer than the Zeking TPU case. I don't remember dropping my phone while using this case, but based on its construction it should do just as good as the Ringke Fusion case but definitely not as good as the other 3 cases above.
Overall I think this case is just as good as the Ringke Fusion if not better protection because of the pronounced elevated front edge. Keep in mind, from my experience using these cases with a polycarbonate back they will get scratched up over time and you will see more finger print smudges.
When it comes to compatibility with skin and screen protectors, it is the same as above.
Similar to the Rhinoshield CrashGuard and ZeKing ultra slim, this barely worked with the Feiyu Tech SPG-c gimbal.
Long review but hope this helps. I will start another post for my screen protectors review as well as a review of the add-on lens from RhinoShield.
Nice reviews! Kudos
My fav is the Zeking ultra slim TPU!
Not related to the topic, but can you tell me where you get the yellow skin for your Pixel? I'm interested in that yellow lock button.
allweknowisa said:
Not related to the topic, but can you tell me where you get the yellow skin for your Pixel? I'm interested in that yellow lock button.
Click to expand...
Click to collapse
from DBrand
see my review here
https://forum.xda-developers.com/pi...and-skins-review-hyperblack-titanium-t3780607
The yellow power button is from rhinoshield. you can purchase the colored buttons separately on their site and it's compatible with their cases.
Thanks for your detailed review. One thing is that I tried Ringke Fusion and Crave Slim Guard; I think Ringke Fusion does provide a bit more of FRONT lip, doesn't it?
drvalianto said:
Thanks for your detailed review. One thing is that I tried Ringke Fusion and Crave Slim Guard; I think Ringke Fusion does provide a bit more of FRONT lip, doesn't it?
Click to expand...
Click to collapse
I don't have the exact measurements and my experience with the ringke fusion is with the lg g6 case. To me it seems like the crave slim guard has a slightly more raised front lip than the ringke fusion but then i am not comparing apple to apple.
Update:
I stuck with my RhinoShield Crashguard and it has protected my phone... extremely well. I have lost count how many times I've dropped it face down, down the stairs, and more.... yep, a bit clumsy with phones.
I stayed at this villa in Bali, and it literally tumbled down these stairs from top to bottom..and my phone remains immaculate. (except when i was in Bali I decided to use it briefly without the case..and of course I dropped it..... )
Included photos of the case with the worst scratches and also...the staircase where it literally bounced its way down...