Well, I have a carbon fiber skinomi skin and its awesome. I've been using it for about 2 months now and I definately recomend skinomi. Not exactly easy to put on, but it does last, considering It's in my pocket all day with keys and what not. The screen protector that comes with the skin is fantastic! No scratches yet, and I know it would have definately been scratched by now if the screen protector wasn't there.
------------
Pros
------------
- Durable skins
- Won't peel
-Looks awesome!
------------
Cons
------------
- It was a little hard for me to put on, especially if you never did this before
- The skin doesn't cover every single inch of the phone, some pieces are a bit small
I found the fit was not what I expected it to be. The back is a nice material and it looks good, but the holes for the screw covers didn't line up all that well and I had to trim it down a smidge.
If I had it all to do over again, I'd buy the skin here:
http://www.gotshadeonline.com/products-page/tablets/viewsonic-g-tablet/
I've also ordered a MATTE screen protector since I couldn't stand the reflection!
Related
Hi guys,
When I look at the forum, it's like advertisements of new products which doesn't tell me a lot. So can you please recommend me:
A case that:
doesn't require me to open some part to access the screen
protects the phone well against drops
is comfortable to hold and touch (my fingers won't get itchy etc.)
And a screen protector that:
protects without distorting the image quality and responsiveness of the screen
doesn't leave bubbles inside (I hate the bubbles) or fingerprints outside
is a little slippery so it won't be a hard job for me to move fingers on the screen
THANKS IN ADVANCE FELLAS!
There is a hybrid case, just search hybrid case sgs2 in amazon,
I'm perfectly happy with that.
Downsides:
- not so slim anymore
- more weight
But my phone feels safe
And I'd suggest the Mumbi-screen protectors,
but you'll still some have fingerprints.
But once applied right (not easy btw )
they fit perfectly
Muta
you can look at the case-mate tough or the otterbox commuter, they both rock.
i bought the case-mate a few days ago, waiting untill it arrives
I also recommend the cases that other posters have, for a screen protector look no further than this.
http://www.amazon.com/SGP-Samsung-Galaxy-Protector-Oleophobic/dp/B0056C3JT6
Ive just recieved a Zenus Air Jacket looks sleek and smart, they do a range of colours, and it comes with a screen protector too, although i tried to fit mine and some dust came out of nowhere and went onto my screen so i had to bin it , hopefully the gorilla glass will protect instead
http://www.mobilefun.co.uk/zenus-skin-air-jacket-series-for-samsung-galaxy-s2-i9100-white-p29786.htm
I have a transparent Casemate Barely There.
It's a bit rigid but I think is the thinnest case on sale.
The transparent one gives to the phone a nice shiny look.
Suggested
I bought a hardcase, but i had the problem with the echo voice !
i heard my own voice twice !
is the problem fixed now?
In my personal opinion i like otterbox for SGS2, fits well, it has a metal cover for back side and plastic covers for usb port and earphones, i have one.
Enviado desde mi Samsung Galaxy S II
perso
Personally, I bought a pack screen protector + white case on ebay.
You can search on ebay :
LOT 7en1 Housse Etui Coque Rigide/FILMS Protecteur Pour Samsung Galaxy S2 i9100
sold by citephone
I just tried different case.
I prefer hard cover.
I try
1) Phoenix tough case: i broke upper corner, rubber come out after a bit of time
Vote: 3/10
Price around 15€
2) Samsung Original Mesh Vent case: Too sensitive and since have hole the dust come in and leave and put it many times to clean i broke the upper corner. In any case it offer a very low protection
Vote 5.5/10
Price around 18€
3)Tpu soft cover gel from ebay: it is not so soft but offer a better protection than other but for it's material attire too many dust on the border. It offer a good grip
Price 5€
Vote 6.5/10 (for now)
At end i buy also Case-Mate Tough that have 2 layer protection but it has not arrived.
Arrived
Perfect case optimal protection and grip. 2 thing. Inside silicon collect dust and dont put while phone is on because it press power button to reboot
Incipio NGP case. Martin Fields screen protector.
A lot of people are recommending products that does not stand out. I prefer to make my phone special so it stands out when I take it out. I like sleek , high tech looking things and thats what this setup is about:
I am currently using metal black battery cover:
http://forum.xda-developers.com/showthread.php?t=1263780
with real aluminum black phone case: (see akiba slider or SZLF slider)
http://forum.xda-developers.com/showthread.php?t=1263780
(SZLF or china made version on ebay for $30, search i9100 metal case)
with ultra optics
http://forum.xda-developers.com/showthread.php?t=1263780
result is a Sleek phone with a premium metal feel to it. The ultra optics cancels out fingerprints while maintaining good optical clarity. (you may need to clean it still every 1 week or so like any protector)
If you are daring, remove the case and just replace the housing for 15$ on ebay every time it gets too scratched.
1xinfusion said:
If you are daring, remove the case and just replace the housing for 15$ on ebay every time it gets too scratched.
Click to expand...
Click to collapse
I got the Incipio NGP case as well and it is pretty sweet--has a great feel and is thin, although the back is a little bit too smooth but I still like it.
That is a good idea on the housing. I might try a white housing.
What is your opinion on a screen protector? I don't like how it adds a layer and changes the feel--and besides, the SGS2 has gorilla glass.
Got myself a Google nexus 5 (used to use iPhone), does anyone can recommend me some gadget for nexus 5.
I absolutely love my cruzer lite bugdroid case. v Perfect in every way. Thin, durable, easy to put on, looks great, has a lip, and all ports are easily accesable. I can also tell you not to get the ismooth screen protectors. Mine has tons of scratches on it after a month of normal use.
I am currently using the Spigen Ultra Hybrid case, with a Spigen crystal screen protector. It protects well, and does not add much bulk.
Case: http://www.amazon.com/Spigen-Japanese-Protector-Graphics-Anti-Scratch/dp/B00FJJ38HY (comes with crystal screen protector)
Screen protector: http://www.amazon.com/Spigen-Protec...D6/ref=pd_bxgy_cps_text_y/183-3051436-7253342
BTW, the screen protector is plastic, but is smooth and applies well.
Thanks guys,
I think spigen case looks great (just bought it)! but for screen protector, I found there is brand called rhino shield, looks really awesome, have you guys heard this?
Personally I'm a fan of wet apply protectors. I have used Xtremeguard for a while. They seem to last forever as they are soft and seem akin to trying to scratch jello which just absorbs and reforms. The only difference i find is that they have an almost tacky feel. You become used to this quite quickly,IMO.
Personally i have always used spigens products their re-release of their glas line sp's work exactly like they shold have in the beginning. Case wise you cant go wrong with spigen imo, as for SP if you want dry apply it really depends on how much you want to spend and what you want from teh sp, i cant stand wet apply sps they have a tendency to give an orange peel effect and have a tacky almost rubbery feeling no where near as pleasant to use as the PET dry apply let alone the tempered glass (which feel as if you have nothing on the phone) ive not heard anything specifically about rhinoshield but take a look aroudn the forum and search around i rmr there being several threads talking about rhino shield, i dont recall what they were or what they said or id link you to em.
- cheers
I'm using the SGP crystal hard surface screen protector without using any case :good:
SGP or xtremeguard screen protectors.
This screen protector doesn't cover full screen. Sides could use another mm, top 2-3mm and bottom at least 7mm. Other than that I got it installed perfectly, on the 2nd try. 1st try I had two dust bubbles. One on side I could live with and another in the middle of display. Other than that, this is probably ringke's most slippery screen protector. It almost rivals how slippery power support screen protectors are.
Other than not reaching edges very happy with it. I hate screen protectors that feel grippy. I am going to write an email to Ringke and see if they will make a revision to it. I can live with the sides because they have to accommodate cases and some reach further in than others but they definitely could make this screen protector go away to the the top and bottom and make punch out capsule shaped to accommodate the FFC and sensors. If you can live with your screen protector not going to the extreme on edges then this is the one to get. I can't believe the difference in slickness compared to their previous iterations on other phones. This is one slick screen protector and makes for a smooth touch screen experience.
Ringke fusion case totally changed the feel of this phone. And that is coming from a Ringke onyx case. The onyx definitely offers more protection but the fusion just feels right, phone is in a see through dress, just right grippy and not as bulky. Try it.
Since there is only a thread for the Nillkin cases and tempered glass I thought it would be nice to have some thread for the accessories in general.
Until this day I tried 3 cases, two screen protectors (films) and two tempered glass protectors.
Case No. 1 ) Slim, silicone case http://www.ebay.com/itm/Transparent-Clear-Silicone-Slim-Gel-Case-For-Huawei-Honor-9/112446352466?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 - Very slim and light case made from nice silicone BUT the protection when dropped would be none. It's not made 100% precisely and since it's silicone it doesn't look any good on the back where it creates bubbles. I've ordered this as the first case to have at least some protection. Nice thing is they include free screen protector but the quality isn't very good - doesn't cover the whole display (I'm not talking about edge-to-edge) and there are 2mm gaps on each side and when the display is on it looks terrible. 2/5
Case No. 2) Nillkin Super Frosted http://www.ebay.com/itm/For-HUAWEI-Honor-9-NILLKIN-Super-Frosted-Shield-Hard-Plastic-Back-Covers-Cases-/152596952252?var=&hash=item23877cb4bc:m:mtNLCAV-KRHaAK2TUOYLPTg - very nice case, really sturdy BUT I have few complaints - it's kinda slippery on the sides but this will go away after some use maybe and the bottom side around jack, charging port and speaker is a bit sharp and if you're holding the phone with the little finger on the bottom it't not really comfortable. Besides that it's really nice case for the price but I expected a bit more. But once again for the price it's more than OK. 4/5
Case No. 3) TPU Shockproof case with "carbon" http://www.ebay.com/itm/Luxury-Carbon-Fiber-Slim-Shockproof-Soft-TPU-Back-Case-For-Huawei-Honor-9-Magic/112325496837?ssPageName=STRK%3AMEBIDX%3AIT&var=412748326145&_trksid=p2060353.m2749.l2649 - as you can imagine, there is absolutely no carbon at all, just some kind of "sticker" or what it is. Nevermind, this case is the best of the three. Really nice case made from TPU, sturdy, should have the best drop protection and fits just perfectly. There is a small "rim" around the screen that should protect the screen from scratches when the phone is "face down". 5/5
Screen protector (film) No. 1) Nillkin Super Clear Protective Film - in terms of size the best screen protector I've had. Obviously it's not edge-to-edge but it does cover the whole display with gaps on the edges BUT the display is fully protected so thumbs up for me. In terms of "anti-fingerprint" it's nowhere close to the display or the back but is much better than some noname protector I've got with TPU case. Overall very nice screen protector for free but I'm still waiting for the Nillkin H+ tempered glass and some noname edge-to-edge tempered glass. 4/5
Tempered glass No. 1) Edge-to-edge blue 2.5D tempered glass http://www.ebay.com/itm/9H-2-5D-Full-Cover-Real-Tempered-Glass-Screen-Protective-Film-For-Huawei-honor-9/152593109357?ssPageName=STRK%3AMEBIDX%3AIT&var=452016649496&_trksid=p2060353.m2749.l2649 - really nice tempered glass (2 pcs) for the price. It has the adhesive only on the top, bottom and the sides but the application was very easy and the glass holds on even with any of tested cases. It has some "dots" in the screen area so I got no rainbow effect whatsoever. The blue color is a bit different from the original color od the phone but it's not a problem since you have your phone in a case. Overall for the price pretty good. 4/5
Tempered glass No. 2) Normal tempered glass Caliber (bought in CZE) - not edge-to-edge, doesn't cover the whole screen, gaps on the sides. Overall sh*t. 1/5
Still waiting for the Nillkin H+ tempered glass.
Nilkin Amazing H+ Pro is No Go
Got the 0.2mm H+ Pro. It's cover the display area for like 99%, with-out just about 0.5mm on each side, after all still the best.
BUT. The silicon layer doesn't hold the tempered glass on both sides, looks like the phone display curve started a bit earlier than its needed for the protector.
It doesn't stick to the display, making it looks like ****, with 3mm frame from each side. Top/bottom sides stick OK, all the way to edges.
So Nilkin Amazing H+ Pro is No Go for me.
Well, got it yesterday so I'm still waiting to try it but not sure if wan't to :laugh:
cases
sooooo, I bought these from tvc mall. They were so cheap that I bought three different ones with the intent of disposing of whichever were poor. Thing is, they are all good in their own way. The plain bumper is just very slimline. The rugged looking one is cool as it has a stand in landscape mode, and the wallet is exceptional quality, given the price. All three fit perfectly, but the plain bumper makes the power and volume buttons so much more tactile. The rugged one looks really cheap in silver, perhaps black would have been a good choice. As i wasn't expecting much from the wallet one, I also oredered the nilkin wallet but that hasn't arrived yet.
https://www.tvc-mall.com/details/dr...r-9-auspicious-dragon-black-sku10174840d.html
https://www.tvc-mall.com/details/fo...casing-with-kickstand-black-sku10174919a.html
https://www.tvc-mall.com/details/ma...ot-for-huawei-honor-9-black-sku10175044a.html
https://www.tvc-mall.com/details/ni...se-for-huawei-honor-9-black-sku10174916a.html
I have also ordered the ultimate sheild screen protector, which is edge to edge, in black as I think it will make an excellent contrast to the silver rear of the handset....which wont be visible when the (absolutely necessary) bumper is fitted!
Ultimate sheild screen protector
.... And the ultimate sheild protector turned up. It is excellent. A word of caution, unless this is fitted absolutely perfectly, it will render one or both of the capacitance keys inoperable. This happened to me as i fitted the sheild a fraction of a millimetre to the right. I carefully removed and replaced it with more accuracy.
Here is a pic of the black sheild fitted to my silver H9, and a photo of the plain bumper fitted from my previous post. Svelt but rugged!
After a couple of hours of use I can say that there has been no loss of sensitivity on the screen or capacitive buttons, but on darker details and the blacks, it does look like the screen is behind a sheet of glass. You will know what i mean if you have used a screen protector which bonds over its entirety, whereas this one has a mild adhesive at the top and bottom of the protector, where the bezels are. A small price to pay i think to protect my new device. It is mostly noticeable in bright light, not so much in low light. And I love the new black look of the bezels with the silver fingerprint sensor still visible.
Right, so, some more hours on....the ultimate sheild has begun to show its flaws. Towards the middle of the screen there is now what i can only describe as a "woodgrain" effect. This could be caused by tiny amounts of moisture getting between the screen and protector, which I guess there is nothing to stop that happening. They offered a refund for dissatisfaction so I guess I will be chasing that up. Pfffft. So disappointed.....
Is there a smart cover for it ?!
Just bought the TPU Shockproof case and it is amazing! It's a very good quality and it doesn't makes the phone feel like a toy.
I really like it and definitely recommend it!
NotoriousNick said:
Just bought the TPU Shockproof case and it is amazing! It's a very good quality and it doesn't makes the phone feel like a toy.
I really like it and definitely recommend it!
Click to expand...
Click to collapse
Can you upload a photo of the phone with the case applied?! That would be awesome
The nilkin "sparkle series" wallet turned up. Its awful. Unlike the cheap wallet I purchased, which remains closed under magnetism, the nilkin just falls open and feels poorer quality.
The Ipaky bumper with the clear perspex back is, however, very nice. The only caveat, it sits flush with the screen so offers no protection if you decide to place your device screen down.
I'm waiting for the smart cover case, if it didn't come fast, I'll go with a skin.
I have bought an honor 9 few days ago. Somebody could suggest me a screen protector that cover whole display? With 3D display is so difficult find a good screen protector....
danygold95 said:
I have bought an honor 9 few days ago. Somebody could suggest me a screen protector that cover whole display? With 3D display is so difficult find a good screen protector....
Click to expand...
Click to collapse
Here you go
https://www.ultimateshield.co.uk/collections/honor-9
PalakMi said:
Here you go
https://www.ultimateshield.co.uk/collections/honor-9
Click to expand...
Click to collapse
Thanks.
I don't like this type of tempered glass (i know that is the only solution for cover 3d display without space).
So, someone has tested "invisible film screen protector"?
danygold95 said:
Thanks.
I don't like this type of tempered glass (i know that is the only solution for cover 3d display without space).
So, someone has tested "invisible film screen protector"?
Click to expand...
Click to collapse
I didn't test, I will try it once I get my honor 9
PalakMi said:
I didn't test, I will try it once I get my honor 9
Click to expand...
Click to collapse
:good:
If someone else has tried this protective film, please give us a feedback.
Did someone try the Mofi screen protector? According to a review on Aliexpress it has minimal space at both sides.
I've seen ones from ultimate shield, I'm considering getting one.
PalakMi said:
I've seen ones from ultimate shield, I'm considering getting one.
Click to expand...
Click to collapse
Good luck with that. Did you read my earlier post? As the protector does not actually sit on the screen, due to the adhesive around the edges, it is susceptible to the "rainbow effect" which i think is caused by humidity between screen and protector. It seemed to manifest itself after the phone had been in my pocket and warmed up. I don't have an overly sweaty crotch.....
Anyhow, they apologised and promptly sent a replacement and the same happened again.
By all means give it a go and they will refund you without issue.
Hey Everyone, just thought I'd put my two cents out there since we are all searching for the perfect screen protector and cases. I ordered the Poetic Revolution in white from amazon and their Tempered glass hoping they'd work good together.
Pics- https://imgur.com/a/w9y2yw0
Okay so the case is a pretty rugged case with a nice lip around the screen. The tempered glass fits in the case well. I popped out the plastic built in screen protector on the case since I'm a tempered glass guy. The case is well made and matches my white pixel 3 xl well Very similar to the Supcase Unicorn Beetle pro's I've had and I-blason armorbox but not as bulky as those. Volume and power buttons are super clicky without much force and thats nice. The sides are a nice texture. Its pretty grippy.
The tempered glass is a edge adhesive type with the black border and it works pretty well. Good cut outs and fits the screen well. Will have to see how strong the glue is in long term use. I wish they included a bigger wet wipe, since the one included is tiny and not super damp. Other than that it works pretty well. It's dot matrix and sensitivity is pretty good. Only a tiny bit of rainbowing but some is expected with the edge adhesive type. Honestly ill take that over bubbles and this has none. Overall I'm very happy with it considering I've seen some really terrible glass protectors on here and XDA lol.
Link to case on amazon
- https://www.amazon.com/dp/B07G5N6MM8/ref=twister_B07G5PB9MT?_encoding=UTF8&psc=1
Link to glass protector on amazon
- https://www.amazon.com/Protector-Po...85959&sr=1-3&keywords=poetic+glass+pixel+3+xl
I have this case too, the built in screen protector is OK, a LITTLE loose when the weather is cold so you can feel your finger "catch" sometimes. Also worth mentioning that the edge sense is still ok to use. I was worried with how sturdy the build is that it might not activate but this is not the case. I have ordered the stand but my understanding is that wireless charging should also not be an issue. The poetic tempered glass has a 2 star rating on amazon right now so I was worried to try that.