After a successful (And impressive) installation of CM7 RC1, I noted that I don't have any 4G settings available or anything.
Should I have installed a nightly? (I think I may flash Nightly 12 and see what happens)...
Luckily, I've done a full Nandroid backup (actually, multiples -- I'm paranoid, I guess) in case I need to return to stock.
Ideas? Advice?
Peace.
4G is not in the RC1, it started appearing on nightly 8 I think....
I believe it was 6, but yes, RC1 does not have 4G integrated into it.
So, I installed Nightly 12, and that has 4G.
Now I see settings for 4G but can't connect. I've checked for my RSA keys with the Key Checker app in the Market and they are present, so that's not the issue.
Now, I get the cycling between scanning, connecting, and then disconnecting with 4G.
Some strange quirks with having to reboot to reset network performance (but maybe that's me not knowing how to work with CM7 yet).
Damn if CM7 isn't fast as **** though...
EDIT: Seems that my WiMax MAC address is different than the one my phone had when I was Stock...Could that be it???
Are you using a wimax enable kernel?
teh roxxorz said:
Are you using a wimax enable kernel?
Click to expand...
Click to collapse
I'm using the whatever the kernel CM7 Nightly 12 has, standard. Didn't know I had to flash a different kernel...
And how do I do that, by the way?
TonyArmstrong said:
I'm using the whatever the kernel CM7 Nightly 12 has, standard. Didn't know I had to flash a different kernel...
And how do I do that, by the way?
Click to expand...
Click to collapse
No, they kernel provided is just fine. Do you have good 4G in your area? Also, you flash a kernel the same you do a rom. Wipe cache and dalvik, then flash.
teh roxxorz said:
No, they kernel provided is just fine. Do you have good 4G in your area? Also, you flash a kernel the same you do a rom. Wipe cache and dalvik, then flash.
Click to expand...
Click to collapse
With stock, I had one bar. But it was obtainable. I seem to have my "issued" device MAC address back as well...
I'm going to remove the battery, wait about 20 secs and restart. See what that does..
If its only 1 bar, it may just tale a lil longer to find it.
OK, looks like the issue might be resolved. Well, at least a workaround.
Seems that turning off my home WiFi allowed WiMax to connect. Pretty damn happy about that...But sadly, when my device went to sleep, WiMax disconnected.
Initial tests with SpeedTest show my WiMax performance *when connected* appears to have improved dramatically. Like above 10Mbps performance down...
So, now, hoping that 4G can stay connected after sleeping and with WiFi connected in a future release...
Sorry, should have mentioned it, but some have an issue when wifi and wimax are both on, they stopped working. Just need to disable wifi and you'll be set.
teh roxxorz said:
Sorry, should have mentioned it, but some have an issue when wifi and wimax are both on, they stopped working. Just need to disable wifi and you'll be set.
Click to expand...
Click to collapse
Is that a known bug at this moment? what about the loss of 4G on sleep? I don't know how to report bugs...
Related
I just rooted my phone and i still have the wimax keys, but it does not work. Can anyone help?
Gr82beagator said:
I just rooted my phone and i still have the wimax keys, but it does not work. Can anyone help?
Click to expand...
Click to collapse
I would take a look here. Maybe this applies to you?
Gr82beagator said:
I just rooted my phone and i still have the wimax keys, but it does not work. Can anyone help?
Click to expand...
Click to collapse
I know it sounds like a **** of a question but do you live in a 4 g area
Sent from my Wimax infested cm6 SuperSonic
The most common cause of this is something corrupt in your data profile. this is fixed by updating running a data profile update.
Sent from my PC36100 using Tapatalk
as the above poster says try updating your profile. if that doesnt work try wiping all data/factory restore and reflashing the rom and trying again. Also make sure you have the radios for your rom. Ie if on a 3.7 rom you should have the latest radios if on an earlier rom you may want to try the previous radios.
what method did you use to verify you still have RSA keys?
i recently i a prob w/ 4g after switching roms. i updated the profile like 4 times, went to a non 4g area, turned on 4g, let it settle, turned it off. later that day i went back to the 4g area, turned it on, and BAM! worked great. My exact problem w/ 4g was it went from scanning, to connecting w/ sprint, the authorizing (for s spilt second), and back to scanning and so forth, over and over. hope this helps....
My 4G will turn on and scan and even show bars but it doesn't work. It never fully loads. 3G works great. Wifi needs to be shut off and turned back on all the time to work correctly. Is anyone else having the same issues?
Nope, did you check you wimax keys? There is an app in the market to check or maybe you have a bad download
Sent from my PC36100 using Tapatalk
tallen2303 said:
My 4G will turn on and scan and even show bars but it doesn't work. It never fully loads. 3G works great. Wifi needs to be shut off and turned back on all the time to work correctly. Is anyone else having the same issues?
Click to expand...
Click to collapse
Are you using Titanium Backup?
Jfree3000 said:
Are you using Titanium Backup?
Click to expand...
Click to collapse
Yes. Does that cause an issue?
jgalan14 said:
Nope, did you check you wimax keys? There is an app in the market to check or maybe you have a bad download
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
What is that app called?
tallen2303 said:
What is that app called?
Click to expand...
Click to collapse
Wimax key checker is in the marker free
Sent from my PC36100 using Tapatalk
jgalan14 said:
Wimax key checker is in the marker free
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
It says my keys are present.
Problem with browser loading page fully
For some reason, no matter if I am on WiFi, 3g or 4g, the browser fails to fully load webpages with a LOT of content.... puzzling.
Based on your original comment, I can't really tell if you mean that it doesn't work when you're browsing, or if you mean it's just not grabbing an IP from sprint or what. I'm going to assume that you're experiencing issues with browsing though after your phone is connected to 4G and showing that it has a 4G signal.
Myn botched the adblock feature in his ROM. You'll have to restore the hosts file if you haven't already. The browser will partially load pages or lock up on sites with flash ads because of this. Grab AdFree (it's free) and tap "Revert". That should restore the hosts file. You can then use the program to block ads effectively.
bigjack100 said:
For some reason, no matter if I am on WiFi, 3g or 4g, the browser fails to fully load webpages with a LOT of content.... puzzling.
Click to expand...
Click to collapse
Read my above post, you're experiencing exactly what my post should fix.
sidepart said:
Based on your original comment, I can't really tell if you mean that it doesn't work when you're browsing, or if you mean it's just not grabbing an IP from sprint or what. I'm going to assume that you're experiencing issues with browsing though after your phone is connected to 4G and showing that it has a 4G signal.
Myn botched the adblock feature in his ROM. You'll have to restore the hosts file if you haven't already. The browser will partially load pages or lock up on sites with flash ads because of this. Grab AdFree (it's free) and tap "Revert". That should restore the hosts file. You can then use the program to block ads effectively.
Click to expand...
Click to collapse
I did the adfree fix last week or something like that when I think everyone was having issues with it. For some reason though 4G will say I have signal and then take forever to load or never completely load at all but if I shut it off 3G works great.
My wifi seems like it just turns off after a little while but says I still have a signal. If I turn off the toggle and turn it back on it works fine again. It's just annoying.
I'm thinking of switching roms but I just don't know which one to go to. I have really liked myn's rom and am not sure what else is good.
tallen2303 said:
I did the adfree fix last week or something like that when I think everyone was having issues with it. For some reason though 4G will say I have signal and then take forever to load or never completely load at all but if I shut it off 3G works great.
My wifi seems like it just turns off after a little while but says I still have a signal. If I turn off the toggle and turn it back on it works fine again. It's just annoying.
I'm thinking of switching roms but I just don't know which one to go to. I have really liked myn's rom and am not sure what else is good.
Click to expand...
Click to collapse
Good news is you have your RSA keys, you might want to back them up in case you do end up switching around ROMs and flashing radio updates and such.
There could be several things going on here, so it's hard to give you a good direction to go in. Are you maybe using a custom kernel? Have you updated your WiMax and other radios? Maybe try flashing back to the rooted version of the stock ROM, and grab the latest software/radio updates.
Here's the latest rooted stock: http://forum.xda-developers.com/showthread.php?t=874251
Here's the latest software/radio updates*: http://forum.xda-developers.com/showthread.php?t=715485
*Probably don't want to update HBOOT, it's not included in the Combo link, so you're safe grabbing that. Also, some people have said that the PRI/NV 1.90 have been giving them ****ty battery life, 1.77 should be fine if you notice this.
Anyway, my recommendation for now is to just get everything back to scratch. Check and see if the 4G works after that. If it does, maybe it was the ROM or some kind of kernel you were using (if any). If it doesn't work still, your area might just be having 4G issues right now. I don't know where your area is, but if you're on the cusp of 4G deployment, it may only work sometimes. I know here in Minneapolis before deployment was official, it would work in isolated areas. Then all of a sudden, the signal would be there and I wouldn't be able to connect. I would just get an "Obtaining IP address from Sprint" message and it'd stick there. Couple of weeks later, it started working again.
sidepart said:
Based on your original comment, I can't really tell if you mean that it doesn't work when you're browsing, or if you mean it's just not grabbing an IP from sprint or what. I'm going to assume that you're experiencing issues with browsing though after your phone is connected to 4G and showing that it has a 4G signal.
Myn botched the adblock feature in his ROM. You'll have to restore the hosts file if you haven't already. The browser will partially load pages or lock up on sites with flash ads because of this. Grab AdFree (it's free) and tap "Revert". That should restore the hosts file. You can then use the program to block ads effectively.
Click to expand...
Click to collapse
I did the adfree fix last week or something like that when I think everyone was having issues with it. For some reason though 4G will say I have signal and then take forever to load or never completely load at all but if I shut it off 3G works great.
My wifi seems like it just turns off after a little while but says I still have a signal. If I turn off the toggle and turn it back on it works fine again. It's just annoying.
I'm thinking of switching roms but I just don't know which one to go to. I have really liked myn's rom and am not sure what else is good.
sidepart said:
Good news is you have your RSA keys, you might want to back them up in case you do end up switching around ROMs and flashing radio updates and such.
There could be several things going on here, so it's hard to give you a good direction to go in. Are you maybe using a custom kernel? Have you updated your WiMax and other radios? Maybe try flashing back to the rooted version of the stock ROM, and grab the latest software/radio updates.
Here's the latest rooted stock: http://forum.xda-developers.com/showthread.php?t=874251
Here's the latest software/radio updates*: http://forum.xda-developers.com/showthread.php?t=715485
*Probably don't want to update HBOOT, it's not included in the Combo link, so you're safe grabbing that. Also, some people have said that the PRI/NV 1.90 have been giving them ****ty battery life, 1.77 should be fine if you notice this.
Anyway, my recommendation for now is to just get everything back to scratch. Check and see if the 4G works after that. If it does, maybe it was the ROM or some kind of kernel you were using (if any). If it doesn't work still, your area might just be having 4G issues right now. I don't know where your area is, but if you're on the cusp of 4G deployment, it may only work sometimes. I know here in Minneapolis before deployment was official, it would work in isolated areas. Then all of a sudden, the signal would be there and I wouldn't be able to connect. I would just get an "Obtaining IP address from Sprint" message and it'd stick there. Couple of weeks later, it started working again.
Click to expand...
Click to collapse
I'll try that thanks.
I updated all of the radios and everything the directions on Myn's RLS5 said to do.
I'm in Nashville and only get 4G in certain areas so it's not a huge deal. It would be cool if it worked correctly though. I just wasn't sure if it was the rom or not.
I haven't changed kernels, I'm just using the one that comes with RLS5 but I do get really ****ty battery life.
Well I've asked in the normal thread no one answered. Searched and searched and no answers. I flashed RC1 to my slide and wifi goes like this connecting obtaining Ip address. disconnected. I watch the wifi symbol up top come on and go off like its actually turning off and on. I made sure sleep was never and set it to 14 channels with no differeence. I Wiped everything cashe data dvak still the same. i used clockwork and formated the data cashe and system folders and reinstalled and the same thing. If i go back to an haxspersso i connect and stay on Anyone else have this problem found the solution ?
Same here. It's not working for most of us. A few people claim it's working for them. I'm also having problems with GPS. The compass part works, but it can't find longitude and latitude.
Prepare to get torn up by people for posting in the dev section.
But address the issue, im guessing this is the first cm7 rom you've flashed. If you are the type to stay safe and only flash the stable or release candidates, then you probably dont know about the wifi issues cyanogenmod commonly has. I didnt stay on cm7 rc1 long enough to see if the wifi was broke, but its likely it is. Either wait for a stable release or try that cyanogenmod wifi fix thread i saw floating around in this dev section (though that might only apply to cm6).
Sent from my T-Mobile myTouch 3G Slide using XDA App
Wifi and gps are working for me, I think its about half and half. You just hear about the people who have issues, not the people who don't. A select few slide owners have slightly varied hardware, makes developing for the phone a *****. If you need wifi, I would just go back to 6.1, it's your best bet.
Sent from my T-Mobile myTouch 3G Slide
I had this problem when flashing CM7 RC1 to both my partner's MT Slide and my MT4G.
Rebooting fixed it.
CM7 Nightly 19 only wifi working for 100%
I know I don't have 3G or EDGE soo wifi is only me
everything works on my phone...wifi,gps,bluetooth... have you flashed the new radio?
Everything works for me, but I have a question being that CM 7 has apps2sd installed how would one know what apps to put onto the sd card? And should I down the the app from market because it will alert you when you can move an app?
Thanks-
I've figured out what is going on. If i use a standard rom i can connect to my N router just perfect. I have my router set to g-n only i could not connect with CM7. i told my router it was ok to connect at 54 and it connected. got to be the drivers.
cdsbj6508 said:
Everything works for me, but I have a question being that CM 7 has apps2sd installed how would one know what apps to put onto the sd card? And should I down the the app from market because it will alert you when you can move an app?
Thanks-
Click to expand...
Click to collapse
You're talking about froyo and up's built in apps2fat. It's not a cm7 feature, it's a built in google feature. It will automatically put some apps on the sd card, but you can move them in the manage applications settings menu.
Sent from my T-Mobile myTouch 3G Slide
xoombie503 said:
everything works on my phone...wifi,gps,bluetooth... have you flashed the new radio?
Click to expand...
Click to collapse
What new radio is required and where it can be found?
talat.masood said:
What new radio is required and where it can be found?
Click to expand...
Click to collapse
First of all, go to settings>about phone, and check your baseband version. If it says 7.15 somewhere near the middle, you're good. If it says 7.09 or 7.08 or anything below 7.15, you need to update. Flash this. Or, here is Chiefz_Reloaded's direct download link.
Flash that radio update via clockwork recovery. Make sure that you have good enough battery to last you a good 5 or 10 minutes to be safe. I would say have at least a 15 or 20% charge when you flash this. If it dies in the middle, you're totally screwed, bricked phone. Basically, as long as your phone doesn't die or your battery doesn't somehow fall out, you'll be safe flashing it. Don't sweat it.
Again, you only need to do that if your baseband version has something other than 7.15 in the middle of the string.
My baseband version is 47.63.35.21U_7.15.35.16, perhaps qualify the requirement, but still I experience connection breaks on WiFi, I am on latest nightly CyanogenMod-7-02202011-NIGHTLY-Slide.
talat.masood said:
My baseband version is 47.63.35.21U_7.15.35.16, perhaps qualify the requirement, but still I experience connection breaks on WiFi, I am on latest nightly CyanogenMod-7-02202011-NIGHTLY-Slide.
Click to expand...
Click to collapse
Some have issues with wifi, it's a result of the varying Slide mainboard hardware. It will probably be fixed in the final or next release candidate. A lot of people say the old build 19 worked for them, but the build #'s reset shortly after RC1 was released so I don't know where you would find it. Sorry
Bump. Mine was working for a while, but stopped. It actually was bumping off my wifi router at home and I had to reset it everytime I tried to connect the phone. It took me a while to figure out that it was the phone that was doing it. Weird.
well ummm its called update rc1 well lest see we have had like 10 nightlys and what are not on rc3 and nightly 74 wifi works on rc3 and all nightlys since so yea get with the times
kitila said:
well ummm its called update rc1 well lest see we have had like 10 nightlys and what are not on rc3 and nightly 74 wifi works on rc3 and all nightlys since so yea get with the times
Click to expand...
Click to collapse
Gee thanks for the polite tip. And gee, I hadn't thought of trying that. Or maybe I did and it's still broke. I flashed cm6.1 and it works. Again, thanks for the support.
There's a post floating around regarding a file from 6.1 flashed onto cm 7, but I fixed my issues by making my router only send out b and g signal even if it is n capable. Good luck
Sent from my T-Mobile myTouch 3G Slide using XDA App
foxdl99 said:
Gee thanks for the polite tip. And gee, I hadn't thought of trying that. Or maybe I did and it's still broke. I flashed cm6.1 and it works. Again, thanks for the support.
Click to expand...
Click to collapse
wasnt trying to be rude sry but i hade the same prod on all cm7 till rc3 and am now on nightly 74 works great"wifi" and the cm6 fix for wifi does not work on cm7 tryed but yea try the newer nightlys
I meant this fix:
http://forum.xda-developers.com/showthread.php?t=1031977
Sent from my T-Mobile myTouch 3G Slide using XDA App
Ok this might be a bit lengthy.
Yesterday I got a replacement EVO because my last one stopped taking a charge (luckily I was able to lock it and flash back to stock).
It's been almost a year since I last rooted an EVO, and I thought I remembered all the steps. So this morning I rooted it (unrevoked). Cleared all the cache's, and then flashed Calkulin's EViO 3 v1 Beta 2.
Well once it booted up all I got was 1x, not 3g. I then tried to flash EVO_Radio_2.15.00.04.08_WiMAX_27925_PRI_NV_1.90.00 3. And then reflashed EViO 3 again.
Again I only have 1x. After this I realized I ****ed up big time. I didnt grab any numbers from the radio screen or make a 4g key backup OR make a nand backup.
The phone is saying the following:
baseband_ver: 2.15.00.11.19
PRI_ver: 1.90_003
PRL_ver: 01115
Hardware information is "unavailable" for 4G MAC Address, Wifi MAC Address, and Bluetooth Address.
So how badly did I **** up? Is this something that
It'll show up as unavailable unless you're actually connected, then it'll show.
Also, if you're on AOSP, it'll show 1x because it shows true data strength unlike sense.
Did you run the 3G fix on a sense rom?
teh roxxorz said:
It'll show up as unavailable unless you're actually connected, then it'll show.
Also, if you're on AOSP, it'll show 1x because it shows true data strength unlike sense.
Did you run the 3G fix on a sense rom?
Click to expand...
Click to collapse
Thanks for the reply. Well whats weird is that im doing this at my desk, and on my old phone it always said 3g. And I had Calkulin's EViO 3 running on that as well.
Is there a way to test my connection to verify it's 3g?
And is http://forum.xda-developers.com/showthread.php?t=974180&highlight=3g+sense the 3g fix you were referencing? (and no i have not applied this)
bmb0x said:
Thanks for the reply. Well whats weird is that im doing this at my desk, and on my old phone it always said 3g. And I had Calkulin's EViO 3 running on that as well.
Is there a way to test my connection to verify it's 3g?
And is http://forum.xda-developers.com/showthread.php?t=974180&highlight=3g+sense the 3g fix you were referencing? (and no i have not applied this)
Click to expand...
Click to collapse
Hmm, awkward. And that is a sense rom, correct?
I was referring to this method > http://www.androidpolice.com/2011/0...aybe-boost-your-3g-speeds-with-a-simple-hack/
Its the xda method, just has pictures to help.
I've tried about many ROM's such as miui, CM7, decks, etc.... I've had no luck, the wifi is just so horrible in many places where in a sense ROM I'd have perfect wifi or good, compared to poor wifi disconnecting after a while.
Thanks for reading Anyone have a solution?
I use CM7 and have absolutely no problem with my wifi. Have you tried CM7? If so, have you tried anything else?
UndeadCircus said:
I use CM7 and have absolutely no problem with my wifi. Have you tried CM7? If so, have you tried anything else?
Click to expand...
Click to collapse
Yeah I've tried it just bit ago and the past days as well but I'm sure it isn't a hardware issue because on nrg 3.5 rom from Nov18 my wifi works perfect where I would I couldn't get wifi signal at all on cm.
The problem is that sense doesn't show the right signal. Compare the speeds and you'll see what I mean
Sent from my PC36100 using Tapatalk
Crossrocker said:
The problem is that sense doesn't show the right signal. Compare the speeds and you'll see what I mean
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
It has nothing to do with speed, please read what I said... I lose signal on aosp ROM's on common areas that I get nearly excellent coverage in, note I tested this with airplane mode on to ensure my wifi doesn't disconnect and switch to 3G. A couple of other others on the miui thread have also said that same.
I'm using the new aosp ROM ice cream sandwich for my phone and wifi works like a charm. Using it now
Sent from my Nexus S 4G using XDA App
xyience said:
I'm using the new aosp ROM ice cream sandwich for my phone and wifi works like a charm. Using it now
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
I'm guessing it has a new kernel? I will flash it tomorrow to see how it works, just to clarify, you are talking about the alpha build right?
CaliBoyPhillip said:
It has nothing to do with speed, please read what I said... I lose signal on aosp ROM's on common areas that I get nearly excellent coverage in, note I tested this with airplane mode on to ensure my wifi doesn't disconnect and switch to 3G. A couple of other others on the miui thread have also said that same.
Click to expand...
Click to collapse
I don't think you understand what I said. Sense shows the wrong wifi signal. It shows 3 bars for me while aosp shows 1. Aosp shows true signal because I am far from the router
Having trouble with AOSP? http://forum.xda-developers.com/showthread.php?t=1295702
Are you using the included kernel or flashing custom ones? While your signal may show lower, you shouldn't notice a drop in actual connectivity. Flashing an incompatible kernel, like a Sense kernel, can mess up your wifi.
I'm on MIUI right now showing a full wifi signal. I haven't used Sense in a very long time, but I don't remember getting better wifi reception while I was using it. I'm using Tiamat right now, maybe try a different kernel next time you flash AOSP and see if that helps. There are also a few tweaks you can do to help with your wifi signal, like changing the wifi scan interval in build.prop, but I haven't actually done anything like that since my signal is fine.
Supersonic Evo 4G | MIUI | Tapatalk
plainjane said:
Are you using the included kernel or flashing custom ones? While your signal may show lower, you shouldn't notice a drop in actual connectivity. Flashing an incompatible kernel, like a Sense kernel, can mess up your wifi.
I'm on MIUI right now showing a full wifi signal. I haven't used Sense in a very long time, but I don't remember getting better wifi reception while I was using it. I'm using Tiamat right now, maybe try a different kernel next time you flash AOSP and see if that helps. There are also a few tweaks you can do to help with your wifi signal, like changing the wifi scan interval in build.prop, but I haven't actually done anything like that since my signal is fine.
Supersonic Evo 4G | MIUI | Tapatalk
Click to expand...
Click to collapse
I've been sticking to the stock kernel that the ROM's have and savaged. I'll give the tiamat kernel a try with miui, what Tiamat version are you using so I can try it if not maybe I'll try getting a phone replacement to see if I might have a fault or evil mojo evo that hates aosp lol! hardware 004 here.
CaliBoyPhillip said:
I've been sticking to the stock kernel that the ROM's have and savaged. I'll give the tiamat kernel a try with miui, what Tiamat version are you using so I can try it if not maybe I'll try getting a phone replacement to see if I might have a fault or evil mojo evo that hates aosp lol! hardware 004 here.
Click to expand...
Click to collapse
I've heard that 004s can be problematic, I have a 003 and only get issues when I go a while without wiping fully. I'm using 4.1.0 right now, start there and maybe try other versions if you want. I ran SZ for a while and it started off smooth but eventually got laggy and unresponsive at times despite anything I would do (wiping caches, etc). Switched back to Tiamat and all has been working well since.
Give it a go, if it doesn't work for you then maybe it's some kind of hardware issue. Just to be sure, do a full wipe and try to avoid restoring anything unless you absolutely have to - definitely don't restore system data. Unfortunately you can't take your phone in to Sprint and get a replacement since your wifi is dodgy on AOSP. If it happened on stock then you might have a case.
Supersonic Evo 4G | MIUI | Tapatalk
plainjane said:
I've heard that 004s can be problematic, I have a 003 and only get issues when I go a while without wiping fully. I'm using 4.1.0 right now, start there and maybe try other versions if you want. I ran SZ for a while and it started off smooth but eventually got laggy and unresponsive at times despite anything I would do (wiping caches, etc). Switched back to Tiamat and all has been working well since.
Give it a go, if it doesn't work for you then maybe it's some kind of hardware issue. Just to be sure, do a full wipe and try to avoid restoring anything unless you absolutely have to - definitely don't restore system data. Unfortunately you can't take your phone in to Sprint and get a replacement since your wifi is dodgy on AOSP. If it happened on stock then you might have a case.
Supersonic Evo 4G | MIUI | Tapatalk
Click to expand...
Click to collapse
I've been using the tiamat for now and it seems more stable on wifi, funny though, the wifi seemed bad on the default miui kernel. I also moved my router to a higher place on a shevel with nothing steel or bad around it. Oh and don't worry my local sprint store in Los angeles is a big time Hispanic corporate... they replace devices for any complaining here to avoid issues with the people lol! I got to love it.
Edit: you are leet according to your post count ahaha.
check it out
CaliBoyPhillip said:
I've tried about many ROM's such as miui, CM7, decks, etc.... I've had no luck, the wifi is just so horrible in many places where in a sense ROM I'd have perfect wifi or good, compared to poor wifi disconnecting after a while.
Thanks for reading Anyone have a solution?
Click to expand...
Click to collapse
i used to have a problem like this, click in the link in my sig and go to the Q&A section in it and follow the steps on how to fix the wifi issue. if you have any questions or anything feel free to post it in that thread. hope i helped ^_^