A few questions of a HX2490b owner - Upgrading, Modifying and Unlocking

Hi everybody, I'm new on the pda's world.
I already have a HP iPaq model hx2490b with Windows 5.0, and I wanna upgrade to Windows 6.5. I'm spanish, and I have the Spiaatie's version of windows mobile 6.5 in spanish language. Until here all good. In theory, it's too easy to install the 6.5 version. But when I push the buttons for bootloader mode (iTask + agenda + reset button), the Pda screen turns slowly white, then, slowly, a darks lines vertically appears. I think that in the bootloader mode must appear letters or something, or not? What can I do?.
Another question is that yesterday I was bored and I prove to install the 6.5 version without the bootloader mode. The upgrade begin and, in 0.1% appears a error:
"ERROR 608: Coult not initialize device.
RUUClientDriver.dll Coult not initialize this device.
This may not be the correct dll for this iPAQ Pocket PC and this NBF file.
Click Cancel to quit."
I prove everything and I don't know what can I do more. Some help, please? Thanks very much, and sorry for my bad english.

anyone can help me? please..

I'm sure that it will be take one minute of your time :/

So, if you're spanish, I'm gonna write spanish...
Tenés que apretar el botón Calendario para que la PDA se conecte con la PC, si no hacés eso luego de entrar en modo bootloader, no podrás actualizar.

Related

Another one bricked!

Hi guys, first post, but I've been lurking for a while.
I was updating my Radio form .05 to .08 using the DIAMIMG file and the reset with vol down and back key. It gets to about 80% and freezes. Now when I had to reset it goes to the red green blue and white screen and says:
"Upgrade Rom code error Please try again"
Serial
I have been unable to get a usb connection to the handset.
I think I'm all out of ideas and I have spent the last few hours trying to find a fix
just flash anything else like a os, etc.
I thinks it solves the problem.
It did for me btw.
i flashed org rom update with os and radio and it solved my problem.
the issue is the I can't get diamoncustomruu.exe to find my phone. windows need a qualcomm driver of some sort, although my Ubuntu system gets the hand set to show usb instead of serial, but wine cannout run diamoncustomruu.exe in a windows wrapper. Mayber I'll have better luck in vista instead of xp?
Zoom, would you be able to run through the process you went through to recover please, including the OS and what files you used?
At the minute I have Olinex 1.40 and Dutty 2.5 on here. It is somewhere between radio .05 and .08 lol.
Thanks for any help!
Ive just installed the Official rom update from htc site.
My screen was stuck in the three colored screen with update error but the rom update solved it.
I just run the official update from there (3colored screen).
And in some how it worked.
Then i reinstalled the custom os, radio etc.
btw i have Hardspl 1.93OliNex UnsignedEdition
Hope it will help you, it worked for me, maby not 4 u but if it does congratualtions
i got my diamond bricked no power at all in it no reset and hard reset is not working and cant get to bootloader has any one a solution thanx in advance
I can now get it to boot and show the following:
PSOC-Diam STAGE_PVT v0x32
Upgrade Rom code error
Please try again
USB
windows not detects the devide (i think)
when the phone is stuck in boot load ahev you tried:
1 - soft reset with red button by stylus?
2 - hard reset manually?
3 - turn phone off, plug in to usb, turn on does it still not recognise? reinstall activesync
4 - have you tried flashing radios, other roms, reflashing hard spl?
does your phone just not get recognised at all?
ive had this problem a few times not just with the diamond, and i alwasy managed to fix
also some roms have an option when you download and unpack to just run rom update, it enters mdos and goes straight to rom update, i.e. it doesnt have the on screen prompts, this may bypass the problem too - i think SWTOS or SWIFTfl roms are like this, or try an original rom
if you are really not getting any response try resets
thats about all the info i cazn offer.
last resort, have you insurance?
hackey100 said:
I can now get it to boot and show the following:
PSOC-Diam STAGE_PVT v0x32
Upgrade Rom code error
Please try again
USB
windows not detects the devide (i think)
Click to expand...
Click to collapse
try to reflash from there
when I try to reflash with .08 from Dutty's site i get error 260 Connection in the utility.
Should I try MTTY or QMAT and if so, can somebody point me in the direction of how to use these, and where to find them.
thanks for your help so far.
yeaaahhhhhh all fixed,god I hat Vista sometimes
see you all when I'm back on Ubuntu
Since you had it working in Linux (the USB) and you seem to preffereble wanna use Linux . There is a Google Project page with an HTC Flasher for Linux. Also there is a ROM Kitchen Project, among others
http://code.google.com/p/htc-flasher/w/list
hackey100 said:
yeaaahhhhhh all fixed,god I hat Vista sometimes
see you all when I'm back on Ubuntu
Click to expand...
Click to collapse
Maybe you'd like to share with everyone what you did to fix it, to help others?
All I did was run the RUU Upgrade Utility in Windows Vista. Because i was able to detect the USB device in XP but couldn't write to it, I thought that it may be driver related.
Vista detected the handset as a USB device correctly and I was able to flash it with a new radio and then Dutty's new ROM.
I tried minicom and HTCFLASH in Ubuntu and was able to detect the device, but when I tried to write a new rom the progress bar in Linux completed, but the phone didn't change.
It's all good now, I'm just happy it didin't break.
Im glad it worked 4 u =)
always nice 2 could help a little bit
Wow, now there's a headline:
XP FAILS, LINUX LIES. VISTA SAVES THE DAY!
Stop the press!
Tell your friends!
in fairness, it is a windows mobile device so I'm not entirely surprised!
Had the same probs few times with xp (activesync) with Vista everythin goes regulary Now I don´t use xp for flashing anymore
Ciao ragazzi,
vi scrivo per chiedervi aiuto, perché pure il mio Diamond è bloccato.
La situazione è questa: dovendo portare il Diamond (della 3) in assistenza, ripristinai tutto originale (ROM, Radio e HSPL). Poi ieri sera, ho avuto la brillante idea di ripersonalizzarmelo. Flasho l'HSPL 1.37 Olinex, e va tutto bene; flasho la ROM Min.74 Y2 v.2.2 FULL, e va tutto bene; flasho la Radio 1.17.25.09, e mi si bricka il Diamond, riportandomi il seguente messaggio:
DIAM100 64M
SPL-1.37.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Please try again
Ho provato a fare un soft reset, niente;
Ho spento (togliendo la batteria) sperando che mi passasse da serial a USB, collegandolo al PC, niente;
Ho spento, collegato al PC e riacceso, niente, non va in modalità USB.
Il sistema operativo del mio PC è Windows 7 64bit; sul portatile ho XP: se accendo mentre è collegato al portatile, il portatile lo sente, ma non riesce a trovare i driver Qualcomm ecc.. ecc...
Insomma, ho il telefono bloccato e non so come uscire da questa situazione!
HELP!
--- --- ---
GOOGLE TRANSLATE
Hello guys,
I am writing to ask for help, because even my Diamond is locked.
The situation is this: having to carry the Diamond (of 3) in support, I restored all the original (ROM, Radio and HSPL). Then last night I had the bright idea of repersonalization. Flash the HSPL Olinex 1:37, and all is well, flash the ROM v.2.2 FULL Min.74 Y2, and all is well, flash the Radio 1.17.25.09, and I blocked the Diamond, returning the following message:
DIAM100 64M
SPL-1.37.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Please try again
I tried to do a soft reset, nothing;
I turned off (by removing the battery) and hope that I might pass from serial to USB, PC connection, nothing;
I turned off, connected to the PC and turned on, nothing in USB mode.
The operating system on my PC is Windows 7 64bit, I have XP on the laptop: if I turn on while connected to the laptop, the laptop feels, but can not find drivers Qualcomm etc...
In short, I have the phone locked and I can not get out of this situation!
HELP!
Try to boot in bootloader mode the phone,and from there connect to usb and try to flash original radio
If you succed flash hard spl 1.40 or 1.93

Help please, my diamond is dead...

Ciao a tutti, ho bisogno di aiuto. È da molto che posseggo un diamond, e ho spesso provato rom varie per trovarne una definitiva. Tre giorni fà ho aggiornato l'Hspl con il 1.93 Olinex, e fin quì tutto bene. Oggi pomeriggio provando a flashare una rom (io flasho sempre dalla memoria interna, rinominando il file della rom in DIAMIMG.nbh...), durante l'aggiornamento il diamond mi ha dato un messaggio d'errore e si è bloccato. Ora mi ritrovo con il telefono morto. Non si accende più, non entra nel bootloader e non ricarica la batteria... Cosa posso fare? Grazie a tutti. Aiuto...
Sorry for my bad english... :-(
Google translate.
Hello everyone, I need help. For a long time I own a diamond, and I have often tried to find a different rom final. Three days ago I updated the Hspl with 1.93 Olinex, and thus far, so good. This afternoon trying to flash a ROM (I always flash from the internal memory, renaming the files of the Rom in DIAMIMG.nbh ...), while updating the diamond he gave me an error message and it was locked. Now I find myself with the phone died. Not turn on again, never enters the bootloader and does not charge the battery ... What can I do? Thanks to all. Help ...
help me please... 33 visit and 0 reply. tanks to all..
Perhaps no reply because nobody has an idea to solve your issue.
This might be a stupid question, but did you try a hard reset of your phone? Did you try to remove the battery, put it back in place, and starting the phone with the volume down key pressed?
Try removing the battery for like half an hour and then putting it back. If that doesn't help, then you have an expensive paperweight.
gp01 said:
Perhaps no reply because nobody has an idea to solve your issue.
This might be a stupid question, but did you try a hard reset of your phone? Did you try to remove the battery, put it back in place, and starting the phone with the volume down key pressed?
Click to expand...
Click to collapse
Forgive me for having responded, but I am very sorry for my diamond .. Anyway thanks for the advice, but I had already tried to power on it with combinations of different keys, but nothing ... I do not know what to do, something other opinions .. Greetings to all ..
davil333 said:
Forgive me for having responded, but I am very sorry for my diamond .. Anyway thanks for the advice, but I had already tried to power on it with combinations of different keys, but nothing ... I do not know what to do, something other opinions .. Greetings to all ..
Click to expand...
Click to collapse
My Suggestion -----------
take the battery out , and then keep the power button pressed for 20 seconds without the battery .
Then put the battery back in , connect the charger , power on Diamond with volume down and action key (center
key ) .........
Let me know if it helps
XDA-Geek said:
My Suggestion -----------
take the battery out , and then keep the power button pressed for 20 seconds without the battery .
Then put the battery back in , connect the charger , power on Diamond with volume down and action key (center
key ) .........
Let me know if it helps
Click to expand...
Click to collapse
Tanks for the advice. I've tried, but nothing... :-(
keep volume down+select key(center round key) and reset it
it means hard reset
keep volume down+select key(center round key) and reset it
it means hard reset
Pal,
DO the following as I had the same problem :
1- Enter boot loader, by turning off the device, pressing down volume key, and turning phone on.
2- Flash any original OS from HTC
3- Download OliNex 1.4 unisgned
4- extract Olinex, move the ssplmanual.exe into ur device after finishing flashing, then connect it into usb cable. then run ssplmanual on ur device.
5- after the screen become black, flash olinex 1.4 sspl into ur device.
6- after this u should be able to flash any rom. PS: do not use radio x.xxx.25.5, it may cause this problem
thx
mua30 said:
Pal,
DO the following as I had the same problem :
1- Enter boot loader, by turning off the device, pressing down volume key, and turning phone on.
2- Flash any original OS from HTC
3- Download OliNex 1.4 unisgned
4- extract Olinex, move the ssplmanual.exe into ur device after finishing flashing, then connect it into usb cable. then run ssplmanual on ur device.
5- after the screen become black, flash olinex 1.4 sspl into ur device.
6- after this u should be able to flash any rom. PS: do not use radio x.xxx.25.5, it may cause this problem
thx
Click to expand...
Click to collapse
Tanks, but my diamond do not turn on... Is completly off. Dont charge the battery. I dont can enter in bootloader mode...
Remove the battery, press volume key down, insert the cable, and power on the device. pls update me in order to help u as mush as i can
mua30 said:
Remove the battery, press volume key down, insert the cable, and power on the device. pls update me in order to help u as mush as i can
Click to expand...
Click to collapse
Thanks for your help. So I removed the
battery, hold down the volume down button,
plug the USB cable and turn on the diamond,
but nothing. Not turn on. I also tried with the
cable from the charger .. I do not know what
to do ...
Now there is something wrong, all HTC mobiles support this operation.
I guess now u need to search for MTTY operation in this forum to repair soft boot of the bois. but before, pls do one thing. in connection settings of active sync or windows mobile device center, remove USB connection, and try again.
Pal I push on this, hence i face these troubles 2 times.
if nothing working pls advise me
mua30 said:
Now there is something wrong, all HTC mobiles support this operation.
I guess now u need to search for MTTY operation in this forum to repair soft boot of the bois. but before, pls do one thing. in connection settings of active sync or windows mobile device center, remove USB connection, and try again.
Pal I push on this, hence i face these troubles 2 times.
if nothing working pls advise me
Click to expand...
Click to collapse
I've used mtty in the past to format the
diamond before installing a new rom. In Active
Sync I have disabled the USB connection .. The
fact is that no turn on at all, I can not link to any
program ... Do I just have to try to turn it with
a charged battery of another diamond ...
Thank you.
its Luck
davil333 said:
Ciao a tutti, ho bisogno di aiuto. È da molto che posseggo un diamond, e ho spesso provato rom varie per trovarne una definitiva. Tre giorni fà ho aggiornato l'Hspl con il 1.93 Olinex, e fin quì tutto bene. Oggi pomeriggio provando a flashare una rom (io flasho sempre dalla memoria interna, rinominando il file della rom in DIAMIMG.nbh...), durante l'aggiornamento il diamond mi ha dato un messaggio d'errore e si è bloccato. Ora mi ritrovo con il telefono morto. Non si accende più, non entra nel bootloader e non ricarica la batteria... Cosa posso fare? Grazie a tutti. Aiuto...
Sorry for my bad english... :-(
Google translate.
Hello everyone, I need help. For a long time I own a diamond, and I have often tried to find a different rom final. Three days ago I updated the Hspl with 1.93 Olinex, and thus far, so good. This afternoon trying to flash a ROM (I always flash from the internal memory, renaming the files of the Rom in DIAMIMG.nbh ...), while updating the diamond he gave me an error message and it was locked. Now I find myself with the phone died. Not turn on again, never enters the bootloader and does not charge the battery ... What can I do? Thanks to all. Help ...
Click to expand...
Click to collapse
Last week my Diamond slipped from my pocket and went straight into main hole full of water. but guess wtt?
after two hours of drying in front of gas heater , my diamond came back to life.not even of one drop inside it.Now its running very smooth. if it came back to life after dropping in a water then how come your diamond dead after flashing any rom.Dont waste it, just keep trying. If nothing happen then please send me its original accossories..i.e. battery,handfree, empty box and booklet.Please..What you say?
x2umer said:
Last week my Diamond slipped from my pocket and went straight into main hole full of water. but guess wtt?
after two hours of drying in front of gas heater , my diamond came back to life.not even of one drop inside it.Now its running very smooth. if it came back to life after dropping in a water then how come your diamond dead after flashing any rom.Dont waste it, just keep trying. If nothing happen then please send me its original accossories..i.e. battery,handfree, empty box and booklet.Please..What you say?
Click to expand...
Click to collapse
Hello, I want to continue to try to resurrect my
diamond, but if it fails I have a friend who
wants it as spare parts. I'm sorry. Hello
ok, search for HTC elph repair tools in google, read the steps correctly of how to bring a mobile live again (there a lot of tools that will help y). I was faced this problem before, i have the topic, but its in arabic langauge. this is the best man, do not loose ur mobile, it had nothing, just little patient, and u will bring it a live again.
do you actually read his posts? the devices doesn´t start at all....
seems to be a hardware failure.
mua30 said:
ok, search for HTC elph repair tools in google, read the steps correctly of how to bring a mobile live again (there a lot of tools that will help y). I was faced this problem before, i have the topic, but its in arabic langauge. this is the best man, do not loose ur mobile, it had nothing, just little patient, and u will bring it a live again.
Click to expand...
Click to collapse
LORDShadowMan said:
do you actually read his posts? the devices doesn´t start at all....
seems to be a hardware failure.
Click to expand...
Click to collapse
i read it, and i know its bios failure not hardware. i faced this before with elf pal.

IPAQ Data Messengers - newbie needs help!

I managed to get my hands on a couple of old Data Messenders, but I'm not having any luck upgrading the firmware on them. The Product ID for them is FA123T#ABA - I'm a newbie, so correct me if I'm wrong, but AFAIK that's basically something that describes the configuration - does it have a cam, how much memory, etc. - is that right? So if I can get an image from a unit with a different product ID, (HP site has updates, but nothing for a unit with my ID) do I risk bricking the unit, or is it more likely just that there might be something that doesn't work right? I'd come across a tool called Bootloader_GUI.exe on a PDA site that seemed to possibly be something that might work, it at least understands to look for *.nbf files, but it doesn't want to flash my phones. Any other tools out there that'd let me update my firmware? What I'm running does have some glitches (voice mail icon never dissapears despite getting the message) and if I'm not mistaken there's improvements for battery life.
Here's the version info from asset viewer:
Version
Product Revision Level :
ROM Date : 2008-08-03
ROM Revision : 0.30.15-484-WWE
Extended ROM Version :
OS Version : 6.1
Bootloader Version : 1757
XIP Version : 1.0.0.0
I've attached the whole thing as an attachment.
OK, now I'm even more motivated to get the ROM in these units upgraded - I was able to get TomTom running on a model with a newer ROM version (12/08) with the same setting that don't work on this one. If I can't tweek the product id to let the latest from hp on them, can anyone walk me through dumping the newer ROM to sd, and how to load it onto the older machines. I've googled looking for how to put the units into boot loader mode, no joy. Did find something for a USB composite mode here in the "iPAQ Data Messenger - Anyone working on a WM6.5 ROM" thread, I'll try it when I get home.
Help!!!
Still looking for a way to upgrade these units - I remember on some older iPaqs that you could start the upgrade without power plugged into the iPaq, then when it complained, swap some files, and plug in power, and the upgrade would complete - anyone know the details for how that works and if there's a way to use the same trick? I suppose it could connect using bluetooth, but I'm a bit leary of flashing via bt. Anyone? Bueler?
ayuda....
hola, oye tengo el mismo id de la hp ipaq data messenger pero quiero actualizarla y me pregunto si tu ya conseguiste eso, pues aun no encuentro la manera de ponerlo en modo bootloader sera k me puedes ayudar?

[Q] Help needed to flash my diamond

Hi everyone, here is my problem. I have a diamond, and a few days ago i installed a custom rom called BsB. I'm happy with it but i wish to reinstall an official rom, direct from HTC. Everytime i try to install a rom, i have an error message, and the proccess fails. What can I do? And i wish to know which is the more recent official rom and where to download it? Thank you very much for any help, and long live this forum.
have you read the Mtty thread ? i think it will help you
tu dois effectuer un speciale formatage ( down vol- + ok la bouton ronde au milieu + reset ) et u reconmence l'instalation de neuveau de la room

[Q] Galaxy Tab 3 10.1 P5210 No active WiFi

Friends I have a problem when I try to activate the Wifi, it does not. button returns. I have proven to Hard Reset, I updated Rom Official Kit Kat through android., Check if you have connected all internal connectors and nothing .... I can not find any help on Google ... no one has that problem ... It will be problem Factory ???? HELP
Lo siento, pero necesitas hablar ingles.
Sent from my ATRIX HD using XDA Free mobile app
bmatney is totally right forums rules dictate you need to use English.
@lacosoft you need to read forum rules. Stop been lazy, Use Google many claims it is your friend. Use this page=>]h__ps://translate.google.com/?hl=en&tab=TT
Here is the proper way. Use Google to translate and copy the English translation here. There is always the need to manually correct some words. Then if you feel you need write the Spanish version separately. I will suggest use quotation but not necessary.
Here is my English to Spanish translation, yes Google is not perfect but give you an Idea.
bmatney es reglas foros totalmente correctas dictan necesita usar Inglés.
lacosoft te recomiendo que leas las reglas del foro. Detener sido perezoso, Usar Google muchas reclamaciones que es tu amigo. Utilice esta página => h__ps://translate.google.com/?hl=en&tab=TT
Aquí está la manera adecuada. Utilice Google para traducir y copiar la traducción en Inglés aquí. Siempre existe la necesidad de corregir manualmente algunas palabras. Entonces, si usted siente que necesita escribir la versión en español por separado. Voy a sugerir el uso de presupuesto, pero no es necesario.
Click to expand...
Click to collapse
So do not be lacy when you get back translate the info and the Title.
================================================================================================
Here is your original Spanish Question translated with Googles
Title: Galaxy Tab3 10.1 P5210 Wifi would not turn on
Friends I have a problem when I try to activate the Wifi, it does not. button returns. I've done hard reset, Ya official Rom update Kit Kat through android., And verfique if you have internal connectors all connected and nothing .... I can not find any help on Google ... no one has that problem ... It will be problem Factory ???? HELP !!!!!
And yes RED are the mistake made by google but still understandably.
My Answer
This problem is showing up to many that has change to KK 4.4.2 using cellphone models TAB 3 7" and 8". It usually happens to them when they go back to 4.4.2. It is the first time I see some one with a P5210.
This is my personal opinion: "I believe KK-4.4.2 is worthless piece of garbage, that only create issues. And watch out it will get worst with new Future Android releases due to Google's intention in perform a Total SELinix Enforce."
What I will do if I am you?
I will download my exact P210 Stock Rom from Samsung or Sammobile , And Odin back to factory. Yes the one that the device came with. You should had written the info in some place. The fact is that most 4,2,2 P5210 Stock Rom should work. But since you have a BIG issue with wifi I will stick to my Original!
Now stop been lacy and use google to translate my English response.
PD. When I call you "lacy" is in a lovely manners, "cariñosamente""
Thanks for the respuesta.Yo and did the downgrade to 4.2.2. and still not responding. I did it through Odin, and nothing. Not if all 4.2.2 roms from different countries will be the same. But thanks for taking the time to answer.

Categories

Resources