I have a problem with auto rotation. Somewhere between rooting (S off, eng S-off and super CID) and installing a CyanogenMod 6.1.3 I got a problem with a rotation on my DHD. If i enable auto rotate my phone goes in landscape in every single app (Messages, camera, menu...) and it's not coming back to portrait when I rotate the phone. If I disable it everything is in portrait even camera and gallery.
I have installed a sensor test 1.0 by Qualigon and I can see that in Orientation sensor, when I rotate the phone, only X is changing, Y=0 and Z=0 all the time.
I have tried calibration and nothing happened. It's the same.
Help please
Having the same problem.
Try clearing caches and fixing permissions in Clockwork recovery.
Worked for me...
I didn't see any followup on this reply. I am having what seems to be a similar problem with the auto rotation. When I start an application it will correctly present either in portrait or landscape.
When I start the application in portrait and then switch the phone to landscape, the screen's rotation will correctly switch to landscape - but switching it back to portrait will not change the screen's rotation.
When I start the application in landscape it will remain in landscape regardless of the phone's orientation. The only way to get to portrait is to close the application, and then restart the application when the phone is in portrait mode.
I installed an application to test the sensor. When holding the phone in portrait vertically, the values I am getting are: ~230, ~0, ~1. When holding in landscape vertically, the values I am getting are: ~120, ~33, ~33.
The wrong rotation behavior happens in all applications. I switched two ROMs already (Cognition 1.5.2 and MIUI) and nothing changed. I am pretty sure the problem is SW related because as I wrote the initial presentation is correct (meaning the initial orientation that I will get when starting an application is always correct).
I would appreciate help.
similar prob FK!!!!!
Same problem but all my sensors show pass via *#0*# sensor checks. Tried nordic i9505 I9505XXUFNB9_I9505NEEFNB2_I9505XXUFNB9_HOME.tar 4.4.2, then SIngapore I9505XXUFNBE_I9505OLBFNB3_I9505XXUFNBE_HOME.tar 4.4.2 all the fken same problem. Screen rotation all fine when I flash firmware, root, then flash CWM touch - everything good. Screen rotate works until the first reboot after all of this which might even be a day or 2 later. As soon as reboot phone, screen rotation dies and it is a huge pain in the arse. Sensors continue to say pass via *#0*#. Every few days i have to re-flash firmware, re-root, then re-CWM touch, no need to factory reset just those 3 steps. Has anyone got any solutions for this yet??
:crying::crying::crying::crying:
QUOTE=godfather3;21690718]I didn't see any followup on this reply. I am having what seems to be a similar problem with the auto rotation. When I start an application it will correctly present either in portrait or landscape.
When I start the application in portrait and then switch the phone to landscape, the screen's rotation will correctly switch to landscape - but switching it back to portrait will not change the screen's rotation.
When I start the application in landscape it will remain in landscape regardless of the phone's orientation. The only way to get to portrait is to close the application, and then restart the application when the phone is in portrait mode.
I installed an application to test the sensor. When holding the phone in portrait vertically, the values I am getting are: ~230, ~0, ~1. When holding in landscape vertically, the values I am getting are: ~120, ~33, ~33.
The wrong rotation behavior happens in all applications. I switched two ROMs already (Cognition 1.5.2 and MIUI) and nothing changed. I am pretty sure the problem is SW related because as I wrote the initial presentation is correct (meaning the initial orientation that I will get when starting an application is always correct).
I would appreciate help.[/QUOTE]
Ok I turned off auto rotation. its VERY annoying when I am lying in bed browsing and the stinking think keeps rotating the screen.
problem is now "I CAN'T" rotate when I need to.
core problem is pictures. it keeps rotating my pictures.
so its displaying pictures 90' off axis. the only pictures it does not rotate are ones I shoot in portrait. those the picture axis remains inline with the screen axis.
but if I shoot a landscape picture (phone on its side) it DISPLAYS it rotated in PORTRAIT orientation (ie using 1/3 the screen) instead of LEAVING IT the same axis as the screen not the phone.
since I don't have auto rotation turned on .... I can't "rotate" the picture by tilting the phone again.
is there a way to STOP the camera auto rotating or adding rotation info to exif ie anyway to force ALL pics to rotate to the same axis as the screen (long side to long side)
OR is there a way for me to FINE TUNE auto rotation so its not so stinking sensitive? IE make it so I have to tilt A LOT FURTHER before it "rotates" and then I could turn auto rotation back on ???
Install smart rotator
Turn on rotation
Go into the app and turn everything to auto rotate
Than turn off everything you don't want to rotate
This order works best...if you did the opposite you will have some issues with the camera at least thats what I found.
NOTE: This will not fix the home screen issue.
Installed the app so far working very well. thank you for the suggestion. I wish I could justchange the angle that triggers the shift.
Hello, I had this problem on my phone that is the Samsung Galaxy Ace 2 GT-I8160. Initially I tried to use the Auto-Rotation feature back. Once could be in a state of Landscape, when I play back in an upright position at the same instant Portrait indirect screen returns to normal.
Then I tried to play the game Moto Racing, consequently always turn right and crashing. After my rather tilt the phone slightly to the left (left oblique) turns back to normal straight. I concluded my phone, there are problems with the G-sensor is slightly deviated to the left oblique.
I have tried to use the manual calibration sorts of apps Bubble, bubble and so on but the power has absolutely no effect.
Is there really a problem in Hardware G-sensor my phone. What had to be taken to the Samsung Service Centre? But I tried to fix this on their own and the help of friends here.
If there is a solution please help and let me know.
Hi all,
I'm having a strange issue with my G4 H815, and I hope someone here can help!
The problem is that the phone won't rotate the screen when you rotate the device, and then the touch screen will not work. I must turn the screen off and then on again in order for the touch to work. But it will stop working as soon as I tilt the device (activate the gyroscope to rotate the screen). After some time this will force phone to restart and then it finds hard to boot up again.
I think it's gyroscope because the problem happens when I turn the device on the side for eg. when I open camera everything is OK but if I try to take a landscape photo it will immediately freeze. And I also did the testing procedure (277634#*#) when I test the motion sensor gyroscope values hardly change. Also in Settings>Display>Motion Sensor Calibration I get and error "Cannot Calibrate"
My questions are:
Where is gyroscope located?
Is it part of mb (soldered to the mother board)?
Does the screen digitizer affect gyroscope function? (because the glue on the top of my screen has come loose but I don't see it affecting anything other then proximity sensor).
accelerometer stops working a few hours after a reboot.
That means auto rotation stops working.
This is very annoying because a lot of apps use it.
For example you think you are taking a landscape photo with the camera and then you end up having to edit the photo to rotate it in landscape mode because accelerometer stopped working and the photo was shot in portrait mode.
It is solved with a reboot but only lasts for some time.
I think the problem is that miui's stupid battery management puts the accelerometer to sleep or something.
(this is not an issue solved by turning the auto rotation toggle on and off in the quick settings.I write it so noone proposes such a solution)