[HELP] Stuck on black screen, can't mount usb - Droid Incredible Q&A, Help & Troubleshooting

Hey guys,
Ran into a slight problem. I was running CM 6.1 with chads incredikernel .37 and decided to flash a stock Nov OTA update rooted ROM just to see what it was like. I have clockworkmod recovery 3.0.0.9. Well after the flash it bootloops, so I boot into recovery but have a black screen. I would mount the usb and apply the PB31.img fix but I can't mount the usb. I imagine it's because of the kernel. Any help? I know i'm not bricked because I can get to hboot, I think it goes to recovery but I cant see it because the screen is all black so I'm trying to navigate recovery blind. I have backups I'm just having a hellish time trying to get to it. Been searching for about an hour for a fix but cant find any. HELP!!!
EDIT: Well I managed to blindly navigate thru recovery to mount my usb. I then installed the PB31IMG fix on the root of my sdcard and rebooted. Man that sucked but atleast I got the phone working again.

I know the first few times I was using recovery I used the screen on/off button to navigate through different selections. After a certain point the screen turns off when you use that though, so make sure that isn't what happened.
Doubt that's your problem but it's the only help I can give you on it.

Related

rom flashing issues

my phone aborts when trying to flash some new roms...any idea y
Are you flashing through Amon RA or Clockwork? I would use RA and make sure you do a full wipe.
Is the ROM you are flashing signed? If not it will abort unless you turn off signature verification. Not sure if Clockwork lets you do this (I haven't used it in forever) but RA does. Of course, if a dev can't properly sign their ROM then you probably shouldn't use it anyway.
Sent from my HTC EVO 4G with Tapatalk
Pls i need help
Hi there, phone screen remains black and no visuals after flashing rom, so I canrt see anything on screen or know what to do about it, pls help?
Details -
After flashing ROM from SD card via which seem to go well... ONLY that the screen is blanked out, no lights except the key lights, phone comes on, responds to touch by giving normal sounds like when I use flick the scroll lock and touch the screen etc (just because I know how the phone works) but problem remains that I cant see anything, so I cant even boot into recovery or download mode to flash again since its all black and dimly lit.
I have a B63M running Gingerbread 2.3.5 so I am not sure what model of HTC it falls under in case this question or similar has been asked already.
I was able to initially get into flash recovery using the mobile uncle tool which allowed me get into recovery, something that has been impossible using the stock recovery in b63m.
I backed up the ROM , cleared cache and daikvil cache then went on to flash ROM using an update.zip and then the touble I explained above.
This is a current situation pls I need help getting back up and flashing the right lattest rom for my phone?
SORRY, i didnt realize at first that you dont have an evo, so i dont know if these instructions will help you
turn your phone off, remove and reinsert battery.
hold vol-down then power until HBOOT loads.
use vol keys to navigate and power to select the word "recovery" to boot into recovery.
I suggest you download roms over wifi if you havent as over 3g can cause roms to download wrong and cause issues

[Q] major confusion

hi all, my wife has been running cm6.1 and lately it has had a few issues, so i go to download through rom manager, it fails downloading several times, download on a computer and transfer it over, boot into recovery through rom manager(i feel retarded for this one... no back up, didnt wipe) and install, well, it goes to the cm boot animation, sits for a long time, then i remember i didnt wipe so i attempt to get back into recovery and wipe, well, some how, the phone managed to go back to the stock recovery... needless to say i became very very confused...
does anyone have any insight?
thanks in advance
If you havent s-off, then you probably will see stock recovery and need to flash the update.zip to get to clockworkmod. I think i remember that right.
Sent from my T-Mobile myTouch 3G Slide using XDA App
i finally did get cm 7 up and running, and in rom manager it says that i have the latest availible clockwork recovery, but i can only get to it if i rebot to recovery through rom manager, if i go through the boot loader, it takes me to the black screen with the ! in the triangle, then after several button pushes takes me to stock recovery
This happens because ROM Manager reads the altered 'update.zip' from your SD card and it is recommended you use that program (app) to do all your loading and ROM stuff. Though if your phone is powered off you can hold Volume Down and power then after getting to the Triangle "!" screen pressing volume up and power gets you to altered 'update' screen.

[Q] CM 7.0.3 cannot connect to wifi

hey guys, i've just flashed CyanogenMod 7.0.3 to my device and the wifi turns on, can see wifi networks and accepts my WEP password, however hangs at "Obtaining IP address...", eventually disconnecting and trying all over again.
I was previously running the 7.0 release with no problems and in my newb naivety i failed make a backup of the ROM.
Any suggestions?
EDIT: Now i cant boot into recovery. I just get the bootloader screen (i think? the white one with the skateboarding Androids at the bottom?) and selecting Recovery just sends me back there. This has now gone from an expected easy fix to something thats starting to get me worried. Can anyone help?
Do a full wipe and re-install the rom again, chances are something corrupted the 1st install which does happen apparently.Don't worry too much mate, over the past 2 weeks ive installed and re-installed about a dozen times and on a few occasions been in exactly the same spot your in.
thanks, but no can do. I cant boot into recovery and thus cant wipe and re-install...
Dumb question, you are holding down the volume(down) and power button at the same time to get into recovery mode??
Wow that's weird, try going into ROM Manager and flashing a different version of Recovery.
thanks for the responses guys. Yeah im doing the vol down + power to get to recovery. I cant get further than the white skateboarding Android screen. ROM manager doesnt let me flash new recovery versions because there aren't any.
You can flash a older recovery, scroll to the bottom when in RomManager and select All ClockworkMod Recoveries and try to flash something like 3.0.0.6
Sent from my Desire HD using Tapatalk
yeah when i do that i get "No legacy recoveries found"
EDIT: i turned on my mobile data and now i can choose older recoveries from ROM manager but i still cant boot there regardless of which one i choose
PS can a mod change the title of the thread cos i realize now my problem is more to do with booting into recovery rather than the wifi issues. Thanks
reading around it seems like i need to use fastboot to reflash the recovery.img from my computer. will try it tonight

Phone stuck on splash screen after trying to flash Synergy rom. Help!!!!!!!!!!!!

So I flashed the "Synergy" rom and noticed that I didnt have the 3d carousel effect after letting the rom run for 2 days. I then noticed another download for the rom with the 3d effect. After flashing that rom I am now stuck on the splash screen. I can also no longer boot into recovery. I am able to access the bootloader but that's it. I cant access nothing on my phone.
Find it odd that you cannot get into Recovery. Are you pulling battery, then holding power and down key?
Yep... Ive pulled the battery several times, and tried accessing the recovery by holding power and the down button.. All it does is restart at the splash screen and stays..
Did you wipe prior to flashing ? Never had that issue so what happens when you click on recovery in the boot loader.
You said in the first post that you can access the boatloader, but in your next post, you say starting your phone with vol down and power takes you to your splash screen... this is an important piece of info for me/us to know in order to help, give advice.
If it goes to the boatloader, try reflashing a custom recovery. If it's going straight to your splash screen, that is a result of " fastboot" being enabled in the settings menu, and you're holding your phone wrong and have to wait longer ( up to 10 minutes) as it can take a while to build the dalvik cache and set up the symlinks.
Tower, this is SkyRaider requesting a fly-by...
Flash a custom recovery pc36img.zip in bootloader. When done boot into recovery and factory wipe. Then partition your sd with 1024mb ext2, move ext2 to ext3. Flash synergy and u should be good. Backup ur sdcard before partitioning it.
Sent from my......ummm...let me get back at'chya!
Have no idea how he messed it up .
reaper24 said:
Have no idea how he messed it up .
Click to expand...
Click to collapse
It's one of two things... bad wipe or user is just impatient and isn't used to the longer initial boot time of the sense 3.0 roms, so panic sets in after 2 minutes of boot
Tower, this is SkyRaider requesting a fly-by...
Ok here's my process fellas and this is whats happening (or not happening). Phone is stuck on the SPLASH screen. I can hold the volume down button and power and get into the bootloader. Here's what Ive tried so far thats not working for me. Trying to go into recovery through the bootloader takes me back to a stuck SPLASH screen. Ive installed a PC36IMG.zip (Custom recovery) and when the HBoot looks for the file it doesnt see it. The file doesnt have zip.zip as the extension and the MD5checksum was good on the file. When I installed the rom I did do a full wipe and when i hit restore it took me to my SPLASH screen and stayed there longer than 10 minutes. I flashed plenty of roms and this is the 1st time ive been at this point where im unable to boot my phone. I suspect the recovery is broken
and as of now, there is no other way (that i know of now) for me to load a custom one into my phone.
I also tried to push the file via adb and when entering the command adb shell, i get a device cannot be found message.
Hope this helps you guys help me.
I'm now having the same problem with my Thunderbolt. I need some major help. I can boot into bootloader, but not recovery because I have a p50IMG.zip on my sd card...so it just scans it and asks to install...how do I get it off of the card?

[Q] BRICKED DINC running cyanogen7! please help

So I was running Cyanogen 7.0 for a couple weeks now and have tried a few others. I downloaded it with clockworkmod and everything was fine until I updated it to the newest one and while it was updating my phone died. Now it is just stuck in blue boot screen with the arrow going around and around. I tried Hboot but every one I pick including recovery, clear storage, and factory reset just gets me stuck on Dinc white boot screen. Trackball isn't responsive here so I us power and when I try to boot with up volume or both up and down with power it just vibrates a couple times and doesn't do anything. (I have to pull battery after this to Hboot or boot with stuck C& screen.) Please help! I have been reading so many threads on here and Cyanogens forums and everyone else seems to fix it with recover from hboot or clockwork recover comes up for them. I am very stumped. I have had a rooted captivate, EVO, and tried moto atrix and back to captivate before deciding to try out Dinc (and verizon)
I had that problem a while ago. I recall using the the in revoked program all over again. Hope that helps
Sent from my ADR6300 using XDA App
the only solution that I would think can work on this case if going back to stock.. since you said you can get in the HBOOT.. you could be able to go back to stock and then reroot you phone again... I was on similar situation once I flash the alternative recover in RM... and I couldnt get to the Recovery and I had to go back to stock by putting the PB31IMG in the HBOOT to get it working..
You can get the link here..
Code:
http://dougpiston.com/?page_id=108
How do I go back to stock by putting the PB31IMG in the HBOOT?
wolfmanb said:
How do I go back to stock by putting the PB31IMG in the HBOOT?
Click to expand...
Click to collapse
Download the file and place it on your sdcard once you get to the HBOOT its gonna ask you if you wanna update.. then just vol - for yes and you are good to go...
Similar Problem
I am facing a similar situation with my Incredible. I was running CM7.0.3 when my phone randomly restarted but only got to the white "HTC Incredible" screen before looping over again.. and again..
I have tried loading the stock image (used the files from dougpiston site) as well as others through the HBOOT but I still cannot get past the "HTC Incredible" boot screen.
Is there something that I am missing? Does anyone else have a suggestion? I know it isn't bricked since I can still get to the HBOOT but I just can't seem to get it to boot an image. I did notice it is still "S-Off" if that matters.
If you cannot get into recovery and flashing a recovery from hboot doesn't work, you may need a new phone. This was mentioned in another thread somewhere recently.
Make sure your sd card is formatted to fat32.

Categories

Resources