I just rooted and flashed CM6.1.2 last night. Before I flashed it, I made a backup of Swype (that came pre-loaded on the phone) with Titanium Backup.
After flashing CM6, I noticed in Titanium Backup that Swype was listed at the bottom in gray, crossed out. I'm not able to restore it.
I signed up for the beta on Swype's site, got the installer, installed Swype, and it's back again... but I'm sure this isn't the same deal because it's a "beta" and I don't want it to expire. I have no desire to go back to factory image because of the Sprint and HTC bloatware.
tl;dr: how can I get my actual copy of Swype (that was pre-installed) back?
Well, there's two options:
1) Stick with the beta (recommended) because even if it "expires", just fire up the installer and get the new version. It will always have a newer, better, faster version than Sense.
2) If for some reason you're hell-bent on keeping the older version of Swype from Sense, rip the Swype.apk from /system/app/ and libswype.so from /system/lib/ from a Sense ROM, then copy them to the respective places once you've loaded CM again via Nandroid backup+restore.
Seriously though, stick with the beta. It's already ahead of the Sense version, and is getting updated within the next few weeks, plus you don't have to re-install it every time you flash an update to your ROM (whereas with the Sense one, you'd have to re-copy the files, each, and, every, time, you, flash, an, update).
So I just flashed CM 6.12 last night and now I'm trying to get Swype back (not that the CM keyboard isn't great, because it is, I just love Swype is all).
I just signed up for the beta again, got the installer, installed it, then when I try to type, I get this:
"The Swype package you installed is configured for another device and will operate with limited functionality. Please contact Swype about this issue."
Click to expand...
Click to collapse
change your input method to another keyboard, reboot, change back to swype, should work
NewZJ said:
change your input method to another keyboard, reboot, change back to swype, should work
Click to expand...
Click to collapse
Strange... just tried this, was able to type "hello" but at the same time the same message came up; now it's not swyping any more words.
rerun the beta installer, dont rush it, after enabling swype, then selecting it in the input method choice box that prompts during the installer, wait for it to license, most people rush to use it at that point but it can take a few seconds to license
Related
does HTC_IME from deire 2.2 froyo rom work on DINC?
edit: Here's a link I think you will find very useful.
http://www.incredibleforum.com/forum/htc-incredible-hacks/791-design-your-own-htc-ime-keyboard.html
Have been unable to get the calibration tool to work with this.
Currently, I am using a theme generated version which works great, but I need to calibrate it to better for how I type.
Using Calibrate FC on me.
I attempted to update the clicker.apk but it won't load.
Anyone run into this, have a fix.
Ref:
http://www.gimpsta.com/themer/main.php
krelvinaz said:
Have been unable to get the calibration tool to work with this.
Currently, I am using a theme generated version which works great, but I need to calibrate it to better for how I type.
Using Calibrate FC on me.
I attempted to update the clicker.apk but it won't load.
Anyone run into this, have a fix.
Ref:
http://www.gimpsta.com/themer/main.php
Click to expand...
Click to collapse
If your rooted and nand unlock, use rootexplorer to move the clicker_hi.apk to /system/app/ make sure you set permissions and reboot your phone, the calibration tool should work.
Did something similar to that... I moved the clicker*.apk (there were two of them) files to and oldapp directory and then I was able to install the new one. No reboot was needed.
Now the keyboard is calibrated to my typing reach and is back to what it was like before the 2.2 update.
krelvinaz said:
Did something similar to that... I moved the clicker*.apk (there were two of them) files to and oldapp directory and then I was able to install the new one....
Click to expand...
Click to collapse
Sitting here for hours trying to figure out how to regain my old DINC 2.1 HTC_IME keyboard, without any success. Rooted, w/S-OFF, Froyo (2.2) under Virtuous 2.6. Edit_01: Then, not sure what I did that was different, but I was able to update my HTC_IME keyboard with a "new" version that I created at the gimpsta.com site. So, my DINC (Rooted, w/S-OFF, Froyo (2.2) under Virtuous 2.6) is working without issue.
Before I was successful in loading a new keyboard, and during my research using Root Explorer (RE), I saw that there were a couple of HTC_IME files in the system and cache directories, but RE said they were read only and would not allow me to move or delete them. Krelvinaz, what was your secret? I saw a clicker.apk and HTC_IME.apk files under the phone data and system folders, even though the apps had been uninstalled in Astro Manager and no longer show(ed) in the Language and Keyboard or in the Applications/Manage Applications settings section. There was only one program called HME IME Test listed in Manage Apps during my troubleshooting searches.
At one time, I did try to load a current version of the clicker.apk, but I got an error message. Is there a clicker calibration utility, for the keyboard and how do I load it.
bmoke said:
Sitting here for hours trying to figure out how to regain my old DINC 2.1 HTC_IME keyboard, without any success....
Click to expand...
Click to collapse
While I did stumble into a successful keyboard installation, I have spent yet more time to figure out how to change permissions in Root Explorer(RE). Not wanting to complicate a working HTC_IME, I tested my RE ability and changed the startup boot mp3 sound in the system directory. So far, so good. However, I am reluctant to delete the clicker.apk, at this time, hoping I might get some knowledgeable feedback about my question on whether there is a calibration utility, for this keyboard. I cannot remember if I actually ran the clicker.apk, way back when I got the phone. I was unable to install it today, because it already exists in the system, and I would need to remove it first. Still hopeful someone might expand on the keyboard and the clicker.apk.
Hi guys,
I'm running my stock (but rooted) ROM, is there any way to update the included version of Swype? I love Swype but the version shipped is 2.2.42 which, from my looks online, is fairly ancient.
Since it is part of the ROM, I presume this all but rules out just installing an updated apk over the top.
Sent from my MB525 using XDA App
Passa91 said:
Hi guys,
I'm running my stock (but rooted) ROM, is there any way to update the included version of Swype?
Click to expand...
Click to collapse
That's interesting, i would also like to know if that's possible!
I just tried this.
1. use root explorer to delete swype.apk in /system/app/
2. use root explorer to search "swype" in /system/lib/ and delete the one you find
(sorry, I forget the file name. it's like "libswype" or something~)
3. download and install the swype you need
4. use root explorer to move swype.apk from /data/app/ to /system/app/
It works.
I'm not sure what the libswype thing is, so it would be better to have a nandroid backup before trying this.
I have found a way to install the latest beta Swype on any device that comes with Swype pre-installed. Follow the directions below, originally posted on the Swype forums for the Droid X;
Originally Posted by grooves12
First, your Droid X must be rooted. There is plenty of info out there on how to accomplish this.
Get a root file manager (I use root explorer)
1. Change your default input method to anything other than Swype.
2. Mount file system as R/W
3. Delete (or move/rename) \system\app\swype.apk
4. Delete (or move/rename) \data\dalvik-cache\[email protected]@[email protected]
5. Delete (or move/rename) \system\lib\libSwypeCore.so
6. Reboot
7. Download and Run the latest Swype Beta installer
8. ENJOY!
I hold no responsibility if you screw up your system, and recommend you make a backup before attempting this, but, the above steps worked perfectly for me, and I am now running the latest Swype beta on my X.
These steps should also work on other models that come pre-installed with Swype from the factory, but I don't have another one to test, so have no way of being sure. If anyone tries it, let me know if it works for you!
(One thing. I found that after install, swyping letters wouldn't create words in the msg box. To possibly avoid this, go to tutorial in the Swype installer just after install and type any words and then finish, you should be good to go )
sooo i did as above but as soon as i click in a text input it opens the keyboard and then closes instantly...
As long as you follow every step, it should work.try un-installing the swype app and using the swype installer again, and reboot for good measure. I can tell you this has worked for me on 2.21 stock rooted rom.
Sent from my MB525 using XDA App
ok got it working thanks.
Many Thanks
Works like a charm!
Now it is possible to install/make a custom wordlist and use it without the complaints by swype that another word exist with the same spelling and it should be deleted popup!!
Great!
Thanks for the guide. Worked easily for me. The beta version seems better than the one that came with my defy+.
Cheers,
Nova
The beta version is a way better than the pre-installed one!
I lost mine updating to ms2ginger 3.0.
Took it back from their site
No regrets
I have read over some of the other threads asking similar questions, but my situation is a little different.
I have been running MIUI for a while, but now it says that my Swype beta has run out of time. I like the version of Swype that has the talk-to-text button. I have read that Myn's ROM doesn't actually have Swype, it just themes it. The only issue I have with this is that it no longer works on any ROM I try, except for Myn's.
Can I get Myn's version off of his ROM, I like it more, or is there some way I can get the old one to start working again? I have also read about removing some Swype files, can't find them where it tells me to look, and I have removed it using Titanium backup.
lehalter said:
I have read over some of the other threads asking similar questions, but my situation is a little different.
I have been running MIUI for a while, but now it says that my Swype beta has run out of time. I like the version of Swype that has the talk-to-text button. I have read that Myn's ROM doesn't actually have Swype, it just themes it. The only issue I have with this is that it no longer works on any ROM I try, except for Myn's.
Can I get Myn's version off of his ROM, I like it more, or is there some way I can get the old one to start working again? I have also read about removing some Swype files, can't find them where it tells me to look, and I have removed it using Titanium backup.
Click to expand...
Click to collapse
update your swype. that's it.
beta.swype.com/android/get
You should be able to go on the swype website and install the beta, it has the speech to text button.
I did the beta, but it still won't swype. I can type, but I can't swype.
lehalter said:
I did the beta, but it still won't swype. I can type, but I can't swype.
Click to expand...
Click to collapse
Are you sure you tried the latest Beta? I had this problem yesterday with an older version of Swype that was themed. I uninstalled Swype, Installed the Swype installer app and let it update. Then I downloaded and installed Swype using the Swype Installer app. It works no problems. I lost the theme for it, but it works nonetheless. I am sure there's a way to pull the Swype from Myn's Rom and put it in yours, but it is not as simple and pulling the .apk and installing it on MIUI. You have to pull other things in System files and push them via ADB. I am sure you could find your answer on how to do this here because I know you are not the first person I have seen ask this question and I know that you question has been answered.
lehalter said:
I have read over some of the other threads asking similar questions, but my situation is a little different.
I have been running MIUI for a while, but now it says that my Swype beta has run out of time. I like the version of Swype that has the talk-to-text button. I have read that Myn's ROM doesn't actually have Swype, it just themes it. The only issue I have with this is that it no longer works on any ROM I try, except for Myn's.
Can I get Myn's version off of his ROM, I like it more, or is there some way I can get the old one to start working again? I have also read about removing some Swype files, can't find them where it tells me to look, and I have removed it using Titanium backup.
Click to expand...
Click to collapse
I got a themed Swype from the Elite rom (black) which also has the mic. Here's what I did.
Download Sense rom to your computer.
Unzip the rom
Copy from the rom /system/ app/Swype.apk and /system/lib/libSwypeCore.so onto your computer.
Using ADB, push the apk to /system/app on your phone
Push libSwypeCore.so to /system/lib on your phone.
If you really don't like ADB, I guess you can root explorer but I don't have that app. I find it easier and faster to use adb.
Evo HW 003
MIUI 1.3.5 with stock kernel
Honeycomb theme
Hi all,
here's how to use the new Swype beta v3.0 with awesome new features:
1. Backup your existing Swype version with Titanium Backup.
2. Uninstall your existing Swype with Titanium Backup.
3. Go to http://beta.swype.com/ , sign up and complete all the steps.
4. Complete!
That was easy
(Even though the Swype website states, that it isn't possible to use this new version on devices that came preinstalled with Swype...)
downloaded and working fine
But it only lasts 6 months before dying completely (I'm an old Archos original swype beta man) - so perhaps best to wait for "official" upgrade.
thank you js...i tried it before i read your post and somehow missed the warning about not installing...anyway thanks to your post, i tried it and it is AWESOME!! by the way, what was major c meaning when he said it would be only for 6 months? do it get disabled automatically? if so, can we go back to the old version cause we had saved it in titanium? kindly guide.
What changes it includes from the old swype??
Yeah if you read the beta sign up agreement biff it expires after 6 months. There will likely be an update before that happens though, so it's a rolling thing.
Is the update that much better than what we have on galaxy sii stock though? I.e. is it worth it?
Sent from my GT-I9100 using XDA Premium App
OMG!! trust me guys...this is just awesome...no! really unbelievably A-W-E-S-O-M-E!!!
the keyboard has been upgraded in the landscape version...the space bar is made a bit small so that it fits comfortably for the thumb (if need be)...the word replacement is excellent and its just like the android stock keyboard word suggestor (no pop up windows). the accuracy is wonderfull...i had started out only recently and i could do a fair but of speed too...all in all it is a must have
HOWEVER!! (isnt that always so)
i had to go back to the stock swype cause i have having problems...like it just stopped working...but when i had it it was a world of fun...its certainly worth a try and going back to the stock is very easy with titanium please do yourselves a favour and try it
I try to uninstall swype using Titanium Backup but I get "Cannot Mount" error. I am uninstalling it wrong by using the bottom option on the long hold?
Nevermind, just used Root Explorer and did it manually.
Zethmir said:
I try to uninstall swype using Titanium Backup but I get "Cannot Mount" error. I am uninstalling it wrong by using the bottom option on the long hold?
Nevermind, just used Root Explorer and did it manually.
Click to expand...
Click to collapse
yes you did it wrong, just click apps once, quickly, then choose un-install.
The long press stuff is not needed.
The new Swype is AMAZING. I love that the suggestions do not pop up on the screen any more. There is just a suggestion bar like the default keyboard
Sent from my GT-I9100 using XDA Premium App
Thanks for figuring this out! Works great.
Sent from my GT-I9100 running Cog S2 using XDA App
would it be possible to repackage swype so that it is installable next to the older swype?
js931 said:
Hi all,
here's how to use the new Swype beta v3.0 with awesome new features:
1. Backup your existing Swype version with Titanium Backup.
2. Uninstall your existing Swype with Titanium Backup.
3. Go to http://beta.swype.com/ , sign up and complete all the steps.
4. Complete!
That was easy
(Even though the Swype website states, that it isn't possible to use this new version on devices that came preinstalled with Swype...)
Click to expand...
Click to collapse
I followed the instructions, but still cannot install new swype.
so I rooted the phone, installed titanium backup pro...
did backup of existing swype, uninstalled it, tried installing new version it does not installs....
and accidently i deleted the current backup of swype from titanium backup pro
now i have no swype....
how do i get this resolved, any help please?
about my phone:
KF2, by Vodafone Australia,
rooted following this guide :http://forum.xda-developers.com/showthread.php?t=1126522
still have yellow triangle at booting, but did not bothered to get rid of it.
was trying to install SWYPE following version : Swype_ENUK_WVGA.3.5.83.26516_flat_black_v3_signed.apk
sorry, i was using an already existing swype apk file on my sdcard to install it was not working... so i signed up and that worked....
but the existing file has black background, that looks so good than the buttons, any help to install that version would be great !!!
latest swype beta
installed and working !!!
But how about the languages? Is there a way to get danish to Swype 3 beta?
This Keyboard is great, damn good find.
Thank you very much!
So I backed up, uninstalled and installed perfectly, no issues. When the phone is restarted, the licensing check fails because the SGS II uses some kind of quick boot which withholds information swype needs on boot. Tried wiping data for swype and installer, the only way to get it working again was to reinstall swype (not installer) let me know if anyone else has replicated this issue. From what I have read, this is the issue with a couple of samsung and htc phones.
braedenws said:
So I backed up, uninstalled and installed perfectly, no issues. When the phone is restarted, the licensing check fails because the SGS II uses some kind of quick boot which withholds information swype needs on boot. Tried wiping data for swype and installer, the only way to get it working again was to reinstall swype (not installer) let me know if anyone else has replicated this issue. From what I have read, this is the issue with a couple of samsung and htc phones.
Click to expand...
Click to collapse
yep, same problem here :-/
braedenws said:
So I backed up, uninstalled and installed perfectly, no issues. When the phone is restarted, the licensing check fails because the SGS II uses some kind of quick boot which withholds information swype needs on boot. Tried wiping data for swype and installer, the only way to get it working again was to reinstall swype (not installer) let me know if anyone else has replicated this issue. From what I have read, this is the issue with a couple of samsung and htc phones.
Click to expand...
Click to collapse
I had the same problem.
So I ran the swype installer again, and it said it needed to be re-licensed. I did all it wanted, and it still didn't work.
So I then used titanium pro to uninstall the swype app (not the installer) and THEN used the installer to download and install swype AGAIN.
That worked.
But what was different now is that I turned my phone OFF, and restarted it - and swype is still licensed!
Villain rom 1.4, tegrak overclock.
Maybe using the reboot option stuffs up the license on some roms; try turning the phone OFF and restarting it.
silk_nz said:
I had the same problem.
So I ran the swype installer again, and it said it needed to be re-licensed. I did all it wanted, and it still didn't work.
So I then used titanium pro to uninstall the swype app (not the installer) and THEN used the installer to download and install swype AGAIN.
That worked.
But what was different now is that I turned my phone OFF, and restarted it - and swype is still licensed!
Villain rom 1.4, tegrak overclock.
Maybe using the reboot option stuffs up the license on some roms; try turning the phone OFF and restarting it.
Click to expand...
Click to collapse
Interesting point. Restart may use some kind of warm boot so it's quick?
I am trying to install the newest update to Swype on my Defy, but I cannot get past the part on the installer that says
"Swype is not properly licened. To Fix - Press "Disable Swype" and 1) uncheck the box next to Swype then, 2) hit BACK button to return and generate license"
I cannot uncheck the box next to Swype, as there is no check box, just settings.
Any idea of how to bypass this so I can update?
Reinstall it again. Instructions should have been emailed to you. Did you uninstall your old swype first. ?
Sent from my MB525 using XDA App
Or better still just from swype, select default key input instead of swype. Then only install the new beta swype. It can not install since you're currently using it as your default key input.
Thanks for the reply guys.
I don't think I can uninstall it first. It was installed stock on my Defy. Not sure how to remove.
Also, I did set my default input back to multi-touch keyboard. That was step 1 the installer, the next step was to uncheck the box to disable it, but there is no box.
Instructions are not via e-mail, but they are clearly written on the applications installer upon trying to install. Just the instruction does not make sense in a case where you cannot check/uncheck to disable.
Just tried as well and can't get it to install BETA Swype and can't uninstall old pre-installed swype. Looks like you need to root the phone and remove the original apk's
Yeah, I also had this issue. You do need a rooted phone (edit: I used SuperOneClickv1.9.5-ShortFuse to root my phone) to be able to uninstall stock swype - i used titanium backup root.
Then install worked fine.
Now I sometimes get this issue:
'Load of EnglishUK failed' - Probably means it couldn't load my library, but not certain. Upon relaunching the app (messages in this case) it didn't show anymore.
That's why i guess it's beta. It's still better than the version that came on the stock rom.
i just went back to swype 2.51 its much better
but not for chinese
i just want to a swype which can use for chinese,but i can't find one. the swype of chinese cannot even beat QQ input at all,but i perfer Baidu input.they r for chinese.
Thanks tecjam. Yeah, I used Titanium to back up and uninstall the stock Swype incase I don't like this beta. So far so good though.
Thanks everybody for replying.